redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity
remarkable-linux/Documentation/vm/ksm.txt
Andrea Arcangeli 2c653d0ee2 ksm: introduce ksm_max_page_sharing per page deduplication limit 
Without a max deduplication limit for each KSM page, the list of the
rmap_items associated to each stable_node can grow infinitely large.

During the rmap walk each entry can take up to ~10usec to process
because of IPIs for the TLB flushing (both for the primary MMU and the
secondary MMUs with the MMU notifier).  With only 16GB of address space
shared in the same KSM page, that would amount to dozens of seconds of
kernel runtime.

A ~256 max deduplication factor will reduce the latencies of the rmap
walks on KSM pages to order of a few msec.  Just doing the
cond_resched() during the rmap walks is not enough, the list size must
have a limit too, otherwise the caller could get blocked in (schedule
friendly) kernel computations for seconds, unexpectedly.

There's room for optimization to significantly reduce the IPI delivery
cost during the page_referenced(), but at least for page_migration in
the KSM case (used by hard NUMA bindings, compaction and NUMA balancing)
it may be inevitable to send lots of IPIs if each rmap_item->mm is
active on a different CPU and there are lots of CPUs.  Even if we ignore
the IPI delivery cost, we've still to walk the whole KSM rmap list, so
we can't allow millions or billions (ulimited) number of entries in the
KSM stable_node rmap_item lists.

The limit is enforced efficiently by adding a second dimension to the
stable rbtree.  So there are three types of stable_nodes: the regular
ones (identical as before, living in the first flat dimension of the
stable rbtree), the "chains" and the "dups".

Every "chain" and all "dups" linked into a "chain" enforce the invariant
that they represent the same write protected memory content, even if
each "dup" will be pointed by a different KSM page copy of that content.
This way the stable rbtree lookup computational complexity is unaffected
if compared to an unlimited max_sharing_limit.  It is still enforced
that there cannot be KSM page content duplicates in the stable rbtree
itself.

Adding the second dimension to the stable rbtree only after the
max_page_sharing limit hits, provides for a zero memory footprint
increase on 64bit archs.  The memory overhead of the per-KSM page
stable_tree and per virtual mapping rmap_item is unchanged.  Only after
the max_page_sharing limit hits, we need to allocate a stable_tree
"chain" and rb_replace() the "regular" stable_node with the newly
allocated stable_node "chain".  After that we simply add the "regular"
stable_node to the chain as a stable_node "dup" by linking hlist_dup in
the stable_node_chain->hlist.  This way the "regular" (flat) stable_node
is converted to a stable_node "dup" living in the second dimension of
the stable rbtree.

During stable rbtree lookups the stable_node "chain" is identified as
stable_node->rmap_hlist_len == STABLE_NODE_CHAIN (aka
is_stable_node_chain()).

When dropping stable_nodes, the stable_node "dup" is identified as
stable_node->head == STABLE_NODE_DUP_HEAD (aka is_stable_node_dup()).

The STABLE_NODE_DUP_HEAD must be an unique valid pointer never used
elsewhere in any stable_node->head/node to avoid a clashes with the
stable_node->node.rb_parent_color pointer, and different from
&migrate_nodes.  So the second field of &migrate_nodes is picked and
verified as always safe with a BUILD_BUG_ON in case the list_head
implementation changes in the future.

The STABLE_NODE_DUP is picked as a random negative value in
stable_node->rmap_hlist_len.  rmap_hlist_len cannot become negative when
it's a "regular" stable_node or a stable_node "dup".

The stable_node_chain->nid is irrelevant.  The stable_node_chain->kpfn
is aliased in a union with a time field used to rate limit the
stable_node_chain->hlist prunes.

The garbage collection of the stable_node_chain happens lazily during
stable rbtree lookups (as for all other kind of stable_nodes), or while
disabling KSM with "echo 2 >/sys/kernel/mm/ksm/run" while collecting the
entire stable rbtree.

While the "regular" stable_nodes and the stable_node "dups" must wait
for their underlying tree_page to be freed before they can be freed
themselves, the stable_node "chains" can be freed immediately if the
stable_node->hlist turns empty.  This is because the "chains" are never
pointed by any page->mapping and they're effectively stable rbtree KSM
self contained metadata.

[akpm@linux-foundation.org: fix non-NUMA build]
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Tested-by: Petr Holasek <pholasek@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Evgheni Dereveanchin <ederevea@redhat.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Gavin Guo <gavin.guo@canonical.com>
Cc: Jay Vosburgh <jay.vosburgh@canonical.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 16:24:31 -07:00

179 lines
10 KiB
Plaintext
Raw Blame History

How to use the Kernel Samepage Merging feature
----------------------------------------------
KSM is a memory-saving de-duplication feature, enabled by CONFIG_KSM=y,
added to the Linux kernel in 2.6.32. See mm/ksm.c for its implementation,
and http://lwn.net/Articles/306704/ and http://lwn.net/Articles/330589/
The KSM daemon ksmd periodically scans those areas of user memory which
have been registered with it, looking for pages of identical content which
can be replaced by a single write-protected page (which is automatically
copied if a process later wants to update its content).
KSM was originally developed for use with KVM (where it was known as
Kernel Shared Memory), to fit more virtual machines into physical memory,
by sharing the data common between them. But it can be useful to any
application which generates many instances of the same data.
KSM only merges anonymous (private) pages, never pagecache (file) pages.
KSM's merged pages were originally locked into kernel memory, but can now
be swapped out just like other user pages (but sharing is broken when they
are swapped back in: ksmd must rediscover their identity and merge again).
KSM only operates on those areas of address space which an application
has advised to be likely candidates for merging, by using the madvise(2)
system call: int madvise(addr, length, MADV_MERGEABLE).
The app may call int madvise(addr, length, MADV_UNMERGEABLE) to cancel
that advice and restore unshared pages: whereupon KSM unmerges whatever
it merged in that range. Note: this unmerging call may suddenly require
more memory than is available - possibly failing with EAGAIN, but more
probably arousing the Out-Of-Memory killer.
If KSM is not configured into the running kernel, madvise MADV_MERGEABLE
and MADV_UNMERGEABLE simply fail with EINVAL. If the running kernel was
built with CONFIG_KSM=y, those calls will normally succeed: even if the
the KSM daemon is not currently running, MADV_MERGEABLE still registers
the range for whenever the KSM daemon is started; even if the range
cannot contain any pages which KSM could actually merge; even if
MADV_UNMERGEABLE is applied to a range which was never MADV_MERGEABLE.
If a region of memory must be split into at least one new MADV_MERGEABLE
or MADV_UNMERGEABLE region, the madvise may return ENOMEM if the process
will exceed vm.max_map_count (see Documentation/sysctl/vm.txt).
Like other madvise calls, they are intended for use on mapped areas of
the user address space: they will report ENOMEM if the specified range
includes unmapped gaps (though working on the intervening mapped areas),
and might fail with EAGAIN if not enough memory for internal structures.
Applications should be considerate in their use of MADV_MERGEABLE,
restricting its use to areas likely to benefit. KSM's scans may use a lot
of processing power: some installations will disable KSM for that reason.
The KSM daemon is controlled by sysfs files in /sys/kernel/mm/ksm/,
readable by all but writable only by root:
pages_to_scan - how many present pages to scan before ksmd goes to sleep
e.g. "echo 100 > /sys/kernel/mm/ksm/pages_to_scan"
Default: 100 (chosen for demonstration purposes)
sleep_millisecs - how many milliseconds ksmd should sleep before next scan
e.g. "echo 20 > /sys/kernel/mm/ksm/sleep_millisecs"
Default: 20 (chosen for demonstration purposes)
merge_across_nodes - specifies if pages from different numa nodes can be merged.
When set to 0, ksm merges only pages which physically
reside in the memory area of same NUMA node. That brings
lower latency to access of shared pages. Systems with more
nodes, at significant NUMA distances, are likely to benefit
from the lower latency of setting 0. Smaller systems, which
need to minimize memory usage, are likely to benefit from
the greater sharing of setting 1 (default). You may wish to
compare how your system performs under each setting, before
deciding on which to use. merge_across_nodes setting can be
changed only when there are no ksm shared pages in system:
set run 2 to unmerge pages first, then to 1 after changing
merge_across_nodes, to remerge according to the new setting.
Default: 1 (merging across nodes as in earlier releases)
run - set 0 to stop ksmd from running but keep merged pages,
set 1 to run ksmd e.g. "echo 1 > /sys/kernel/mm/ksm/run",
set 2 to stop ksmd and unmerge all pages currently merged,
but leave mergeable areas registered for next run
Default: 0 (must be changed to 1 to activate KSM,
except if CONFIG_SYSFS is disabled)
use_zero_pages - specifies whether empty pages (i.e. allocated pages
that only contain zeroes) should be treated specially.
When set to 1, empty pages are merged with the kernel
zero page(s) instead of with each other as it would
happen normally. This can improve the performance on
architectures with coloured zero pages, depending on
the workload. Care should be taken when enabling this
setting, as it can potentially degrade the performance
of KSM for some workloads, for example if the checksums
of pages candidate for merging match the checksum of
an empty page. This setting can be changed at any time,
it is only effective for pages merged after the change.
Default: 0 (normal KSM behaviour as in earlier releases)
max_page_sharing - Maximum sharing allowed for each KSM page. This
enforces a deduplication limit to avoid the virtual
memory rmap lists to grow too large. The minimum
value is 2 as a newly created KSM page will have at
least two sharers. The rmap walk has O(N)
complexity where N is the number of rmap_items
(i.e. virtual mappings) that are sharing the page,
which is in turn capped by max_page_sharing. So
this effectively spread the the linear O(N)
computational complexity from rmap walk context
over different KSM pages. The ksmd walk over the
stable_node "chains" is also O(N), but N is the
number of stable_node "dups", not the number of
rmap_items, so it has not a significant impact on
ksmd performance. In practice the best stable_node
"dup" candidate will be kept and found at the head
of the "dups" list. The higher this value the
faster KSM will merge the memory (because there
will be fewer stable_node dups queued into the
stable_node chain->hlist to check for pruning) and
the higher the deduplication factor will be, but
the slowest the worst case rmap walk could be for
any given KSM page. Slowing down the rmap_walk
means there will be higher latency for certain
virtual memory operations happening during
swapping, compaction, NUMA balancing and page
migration, in turn decreasing responsiveness for
the caller of those virtual memory operations. The
scheduler latency of other tasks not involved with
the VM operations doing the rmap walk is not
affected by this parameter as the rmap walks are
always schedule friendly themselves.
stable_node_chains_prune_millisecs - How frequently to walk the whole
list of stable_node "dups" linked in the
stable_node "chains" in order to prune stale
stable_nodes. Smaller milllisecs values will free
up the KSM metadata with lower latency, but they
will make ksmd use more CPU during the scan. This
only applies to the stable_node chains so it's a
noop if not a single KSM page hit the
max_page_sharing yet (there would be no stable_node
chains in such case).
The effectiveness of KSM and MADV_MERGEABLE is shown in /sys/kernel/mm/ksm/:
pages_shared - how many shared pages are being used
pages_sharing - how many more sites are sharing them i.e. how much saved
pages_unshared - how many pages unique but repeatedly checked for merging
pages_volatile - how many pages changing too fast to be placed in a tree
full_scans - how many times all mergeable areas have been scanned
stable_node_chains - number of stable node chains allocated, this is
effectively the number of KSM pages that hit the
max_page_sharing limit
stable_node_dups - number of stable node dups queued into the
stable_node chains
A high ratio of pages_sharing to pages_shared indicates good sharing, but
a high ratio of pages_unshared to pages_sharing indicates wasted effort.
pages_volatile embraces several different kinds of activity, but a high
proportion there would also indicate poor use of madvise MADV_MERGEABLE.
The maximum possible page_sharing/page_shared ratio is limited by the
max_page_sharing tunable. To increase the ratio max_page_sharing must
be increased accordingly.
The stable_node_dups/stable_node_chains ratio is also affected by the
max_page_sharing tunable, and an high ratio may indicate fragmentation
in the stable_node dups, which could be solved by introducing
fragmentation algorithms in ksmd which would refile rmap_items from
one stable_node dup to another stable_node dup, in order to freeup
stable_node "dups" with few rmap_items in them, but that may increase
the ksmd CPU usage and possibly slowdown the readonly computations on
the KSM pages of the applications.
Izik Eidus,
Hugh Dickins, 17 Nov 2009
View git blame Copy permalink