4d7cbac7c8
The IPMI BT subdriver has been patched to survive "long busy" timeouts seen during firmware upgrades and resets. The patch never returns the HOSED state, synthesizes response messages with meaningful completion codes, and recovers gracefully when the hardware finishes the long busy. The subdriver now issues a "Get BT Capabilities" command and properly uses those results. More informative completion codes are returned on error from transaction starts; this logic was propogated to the KCS and SMIC subdrivers. Finally, indent and other style quirks were normalized. Signed-off-by: Rocky Craig <rocky.craig@hp.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
114 lines
4.1 KiB
C
114 lines
4.1 KiB
C
/*
|
|
* ipmi_smi.h
|
|
*
|
|
* MontaVista IPMI system management interface
|
|
*
|
|
* Author: MontaVista Software, Inc.
|
|
* Corey Minyard <minyard@mvista.com>
|
|
* source@mvista.com
|
|
*
|
|
* Copyright 2002 MontaVista Software Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
|
|
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
|
|
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#ifndef __LINUX_IPMI_MSGDEFS_H
|
|
#define __LINUX_IPMI_MSGDEFS_H
|
|
|
|
/* Various definitions for IPMI messages used by almost everything in
|
|
the IPMI stack. */
|
|
|
|
/* NetFNs and commands used inside the IPMI stack. */
|
|
|
|
#define IPMI_NETFN_SENSOR_EVENT_REQUEST 0x04
|
|
#define IPMI_NETFN_SENSOR_EVENT_RESPONSE 0x05
|
|
#define IPMI_GET_EVENT_RECEIVER_CMD 0x01
|
|
|
|
#define IPMI_NETFN_APP_REQUEST 0x06
|
|
#define IPMI_NETFN_APP_RESPONSE 0x07
|
|
#define IPMI_GET_DEVICE_ID_CMD 0x01
|
|
#define IPMI_COLD_RESET_CMD 0x02
|
|
#define IPMI_WARM_RESET_CMD 0x03
|
|
#define IPMI_CLEAR_MSG_FLAGS_CMD 0x30
|
|
#define IPMI_GET_DEVICE_GUID_CMD 0x08
|
|
#define IPMI_GET_MSG_FLAGS_CMD 0x31
|
|
#define IPMI_SEND_MSG_CMD 0x34
|
|
#define IPMI_GET_MSG_CMD 0x33
|
|
#define IPMI_SET_BMC_GLOBAL_ENABLES_CMD 0x2e
|
|
#define IPMI_GET_BMC_GLOBAL_ENABLES_CMD 0x2f
|
|
#define IPMI_READ_EVENT_MSG_BUFFER_CMD 0x35
|
|
#define IPMI_GET_CHANNEL_INFO_CMD 0x42
|
|
|
|
#define IPMI_NETFN_STORAGE_REQUEST 0x0a
|
|
#define IPMI_NETFN_STORAGE_RESPONSE 0x0b
|
|
#define IPMI_ADD_SEL_ENTRY_CMD 0x44
|
|
|
|
#define IPMI_NETFN_FIRMWARE_REQUEST 0x08
|
|
#define IPMI_NETFN_FIRMWARE_RESPONSE 0x09
|
|
|
|
/* The default slave address */
|
|
#define IPMI_BMC_SLAVE_ADDR 0x20
|
|
|
|
/* The BT interface on high-end HP systems supports up to 255 bytes in
|
|
* one transfer. Its "virtual" BMC supports some commands that are longer
|
|
* than 128 bytes. Use the full 256, plus NetFn/LUN, Cmd, cCode, plus
|
|
* some overhead; it's not worth the effort to dynamically size this based
|
|
* on the results of the "Get BT Capabilities" command. */
|
|
#define IPMI_MAX_MSG_LENGTH 272 /* multiple of 16 */
|
|
|
|
#define IPMI_CC_NO_ERROR 0x00
|
|
#define IPMI_NODE_BUSY_ERR 0xc0
|
|
#define IPMI_INVALID_COMMAND_ERR 0xc1
|
|
#define IPMI_TIMEOUT_ERR 0xc3
|
|
#define IPMI_ERR_MSG_TRUNCATED 0xc6
|
|
#define IPMI_REQ_LEN_INVALID_ERR 0xc7
|
|
#define IPMI_REQ_LEN_EXCEEDED_ERR 0xc8
|
|
#define IPMI_NOT_IN_MY_STATE_ERR 0xd5 /* IPMI 2.0 */
|
|
#define IPMI_LOST_ARBITRATION_ERR 0x81
|
|
#define IPMI_BUS_ERR 0x82
|
|
#define IPMI_NAK_ON_WRITE_ERR 0x83
|
|
#define IPMI_ERR_UNSPECIFIED 0xff
|
|
|
|
#define IPMI_CHANNEL_PROTOCOL_IPMB 1
|
|
#define IPMI_CHANNEL_PROTOCOL_ICMB 2
|
|
#define IPMI_CHANNEL_PROTOCOL_SMBUS 4
|
|
#define IPMI_CHANNEL_PROTOCOL_KCS 5
|
|
#define IPMI_CHANNEL_PROTOCOL_SMIC 6
|
|
#define IPMI_CHANNEL_PROTOCOL_BT10 7
|
|
#define IPMI_CHANNEL_PROTOCOL_BT15 8
|
|
#define IPMI_CHANNEL_PROTOCOL_TMODE 9
|
|
|
|
#define IPMI_CHANNEL_MEDIUM_IPMB 1
|
|
#define IPMI_CHANNEL_MEDIUM_ICMB10 2
|
|
#define IPMI_CHANNEL_MEDIUM_ICMB09 3
|
|
#define IPMI_CHANNEL_MEDIUM_8023LAN 4
|
|
#define IPMI_CHANNEL_MEDIUM_ASYNC 5
|
|
#define IPMI_CHANNEL_MEDIUM_OTHER_LAN 6
|
|
#define IPMI_CHANNEL_MEDIUM_PCI_SMBUS 7
|
|
#define IPMI_CHANNEL_MEDIUM_SMBUS1 8
|
|
#define IPMI_CHANNEL_MEDIUM_SMBUS2 9
|
|
#define IPMI_CHANNEL_MEDIUM_USB1 10
|
|
#define IPMI_CHANNEL_MEDIUM_USB2 11
|
|
#define IPMI_CHANNEL_MEDIUM_SYSINTF 12
|
|
|
|
#endif /* __LINUX_IPMI_MSGDEFS_H */
|