![Hegde, Vinay](/assets/img/avatar_default.png)
This patch adds an additional check in the Davinci EMAC RX Handler, which tests the __LINK_STATE_NOCARRIER flag along with the __LINK_STATE_START flag as part EMAC shutting down procedure. This avoids WARNING: at drivers/net/davinci_emac.c:1040 emac_rx_handler+0xf8/0x120() during rtcwake used to suspend the target for a specified duration. Signed-off-by: Hegde, Vinay <vinay.hegde@ti.com> Acked-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2042 lines
58 KiB
C
2042 lines
58 KiB
C
/*
|
|
* DaVinci Ethernet Medium Access Controller
|
|
*
|
|
* DaVinci EMAC is based upon CPPI 3.0 TI DMA engine
|
|
*
|
|
* Copyright (C) 2009 Texas Instruments.
|
|
*
|
|
* ---------------------------------------------------------------------------
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
* ---------------------------------------------------------------------------
|
|
* History:
|
|
* 0-5 A number of folks worked on this driver in bits and pieces but the major
|
|
* contribution came from Suraj Iyer and Anant Gole
|
|
* 6.0 Anant Gole - rewrote the driver as per Linux conventions
|
|
* 6.1 Chaithrika U S - added support for Gigabit and RMII features,
|
|
* PHY layer usage
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/string.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/in.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/highmem.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/version.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/semaphore.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/io.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/davinci_emac.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <asm/page.h>
|
|
|
|
#include "davinci_cpdma.h"
|
|
|
|
static int debug_level;
|
|
module_param(debug_level, int, 0);
|
|
MODULE_PARM_DESC(debug_level, "DaVinci EMAC debug level (NETIF_MSG bits)");
|
|
|
|
/* Netif debug messages possible */
|
|
#define DAVINCI_EMAC_DEBUG (NETIF_MSG_DRV | \
|
|
NETIF_MSG_PROBE | \
|
|
NETIF_MSG_LINK | \
|
|
NETIF_MSG_TIMER | \
|
|
NETIF_MSG_IFDOWN | \
|
|
NETIF_MSG_IFUP | \
|
|
NETIF_MSG_RX_ERR | \
|
|
NETIF_MSG_TX_ERR | \
|
|
NETIF_MSG_TX_QUEUED | \
|
|
NETIF_MSG_INTR | \
|
|
NETIF_MSG_TX_DONE | \
|
|
NETIF_MSG_RX_STATUS | \
|
|
NETIF_MSG_PKTDATA | \
|
|
NETIF_MSG_HW | \
|
|
NETIF_MSG_WOL)
|
|
|
|
/* version info */
|
|
#define EMAC_MAJOR_VERSION 6
|
|
#define EMAC_MINOR_VERSION 1
|
|
#define EMAC_MODULE_VERSION "6.1"
|
|
MODULE_VERSION(EMAC_MODULE_VERSION);
|
|
static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
|
|
|
|
/* Configuration items */
|
|
#define EMAC_DEF_PASS_CRC (0) /* Do not pass CRC upto frames */
|
|
#define EMAC_DEF_QOS_EN (0) /* EMAC proprietary QoS disabled */
|
|
#define EMAC_DEF_NO_BUFF_CHAIN (0) /* No buffer chain */
|
|
#define EMAC_DEF_MACCTRL_FRAME_EN (0) /* Discard Maccontrol frames */
|
|
#define EMAC_DEF_SHORT_FRAME_EN (0) /* Discard short frames */
|
|
#define EMAC_DEF_ERROR_FRAME_EN (0) /* Discard error frames */
|
|
#define EMAC_DEF_PROM_EN (0) /* Promiscous disabled */
|
|
#define EMAC_DEF_PROM_CH (0) /* Promiscous channel is 0 */
|
|
#define EMAC_DEF_BCAST_EN (1) /* Broadcast enabled */
|
|
#define EMAC_DEF_BCAST_CH (0) /* Broadcast channel is 0 */
|
|
#define EMAC_DEF_MCAST_EN (1) /* Multicast enabled */
|
|
#define EMAC_DEF_MCAST_CH (0) /* Multicast channel is 0 */
|
|
|
|
#define EMAC_DEF_TXPRIO_FIXED (1) /* TX Priority is fixed */
|
|
#define EMAC_DEF_TXPACING_EN (0) /* TX pacing NOT supported*/
|
|
|
|
#define EMAC_DEF_BUFFER_OFFSET (0) /* Buffer offset to DMA (future) */
|
|
#define EMAC_DEF_MIN_ETHPKTSIZE (60) /* Minimum ethernet pkt size */
|
|
#define EMAC_DEF_MAX_FRAME_SIZE (1500 + 14 + 4 + 4)
|
|
#define EMAC_DEF_TX_CH (0) /* Default 0th channel */
|
|
#define EMAC_DEF_RX_CH (0) /* Default 0th channel */
|
|
#define EMAC_DEF_RX_NUM_DESC (128)
|
|
#define EMAC_DEF_MAX_TX_CH (1) /* Max TX channels configured */
|
|
#define EMAC_DEF_MAX_RX_CH (1) /* Max RX channels configured */
|
|
#define EMAC_POLL_WEIGHT (64) /* Default NAPI poll weight */
|
|
|
|
/* Buffer descriptor parameters */
|
|
#define EMAC_DEF_TX_MAX_SERVICE (32) /* TX max service BD's */
|
|
#define EMAC_DEF_RX_MAX_SERVICE (64) /* should = netdev->weight */
|
|
|
|
/* EMAC register related defines */
|
|
#define EMAC_ALL_MULTI_REG_VALUE (0xFFFFFFFF)
|
|
#define EMAC_NUM_MULTICAST_BITS (64)
|
|
#define EMAC_TX_CONTROL_TX_ENABLE_VAL (0x1)
|
|
#define EMAC_RX_CONTROL_RX_ENABLE_VAL (0x1)
|
|
#define EMAC_MAC_HOST_ERR_INTMASK_VAL (0x2)
|
|
#define EMAC_RX_UNICAST_CLEAR_ALL (0xFF)
|
|
#define EMAC_INT_MASK_CLEAR (0xFF)
|
|
|
|
/* RX MBP register bit positions */
|
|
#define EMAC_RXMBP_PASSCRC_MASK BIT(30)
|
|
#define EMAC_RXMBP_QOSEN_MASK BIT(29)
|
|
#define EMAC_RXMBP_NOCHAIN_MASK BIT(28)
|
|
#define EMAC_RXMBP_CMFEN_MASK BIT(24)
|
|
#define EMAC_RXMBP_CSFEN_MASK BIT(23)
|
|
#define EMAC_RXMBP_CEFEN_MASK BIT(22)
|
|
#define EMAC_RXMBP_CAFEN_MASK BIT(21)
|
|
#define EMAC_RXMBP_PROMCH_SHIFT (16)
|
|
#define EMAC_RXMBP_PROMCH_MASK (0x7 << 16)
|
|
#define EMAC_RXMBP_BROADEN_MASK BIT(13)
|
|
#define EMAC_RXMBP_BROADCH_SHIFT (8)
|
|
#define EMAC_RXMBP_BROADCH_MASK (0x7 << 8)
|
|
#define EMAC_RXMBP_MULTIEN_MASK BIT(5)
|
|
#define EMAC_RXMBP_MULTICH_SHIFT (0)
|
|
#define EMAC_RXMBP_MULTICH_MASK (0x7)
|
|
#define EMAC_RXMBP_CHMASK (0x7)
|
|
|
|
/* EMAC register definitions/bit maps used */
|
|
# define EMAC_MBP_RXPROMISC (0x00200000)
|
|
# define EMAC_MBP_PROMISCCH(ch) (((ch) & 0x7) << 16)
|
|
# define EMAC_MBP_RXBCAST (0x00002000)
|
|
# define EMAC_MBP_BCASTCHAN(ch) (((ch) & 0x7) << 8)
|
|
# define EMAC_MBP_RXMCAST (0x00000020)
|
|
# define EMAC_MBP_MCASTCHAN(ch) ((ch) & 0x7)
|
|
|
|
/* EMAC mac_control register */
|
|
#define EMAC_MACCONTROL_TXPTYPE BIT(9)
|
|
#define EMAC_MACCONTROL_TXPACEEN BIT(6)
|
|
#define EMAC_MACCONTROL_GMIIEN BIT(5)
|
|
#define EMAC_MACCONTROL_GIGABITEN BIT(7)
|
|
#define EMAC_MACCONTROL_FULLDUPLEXEN BIT(0)
|
|
#define EMAC_MACCONTROL_RMIISPEED_MASK BIT(15)
|
|
|
|
/* GIGABIT MODE related bits */
|
|
#define EMAC_DM646X_MACCONTORL_GIG BIT(7)
|
|
#define EMAC_DM646X_MACCONTORL_GIGFORCE BIT(17)
|
|
|
|
/* EMAC mac_status register */
|
|
#define EMAC_MACSTATUS_TXERRCODE_MASK (0xF00000)
|
|
#define EMAC_MACSTATUS_TXERRCODE_SHIFT (20)
|
|
#define EMAC_MACSTATUS_TXERRCH_MASK (0x7)
|
|
#define EMAC_MACSTATUS_TXERRCH_SHIFT (16)
|
|
#define EMAC_MACSTATUS_RXERRCODE_MASK (0xF000)
|
|
#define EMAC_MACSTATUS_RXERRCODE_SHIFT (12)
|
|
#define EMAC_MACSTATUS_RXERRCH_MASK (0x7)
|
|
#define EMAC_MACSTATUS_RXERRCH_SHIFT (8)
|
|
|
|
/* EMAC RX register masks */
|
|
#define EMAC_RX_MAX_LEN_MASK (0xFFFF)
|
|
#define EMAC_RX_BUFFER_OFFSET_MASK (0xFFFF)
|
|
|
|
/* MAC_IN_VECTOR (0x180) register bit fields */
|
|
#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT BIT(17)
|
|
#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT BIT(16)
|
|
#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC BIT(8)
|
|
#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC BIT(0)
|
|
|
|
/** NOTE:: For DM646x the IN_VECTOR has changed */
|
|
#define EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC BIT(EMAC_DEF_RX_CH)
|
|
#define EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC BIT(16 + EMAC_DEF_TX_CH)
|
|
#define EMAC_DM646X_MAC_IN_VECTOR_HOST_INT BIT(26)
|
|
#define EMAC_DM646X_MAC_IN_VECTOR_STATPEND_INT BIT(27)
|
|
|
|
/* CPPI bit positions */
|
|
#define EMAC_CPPI_SOP_BIT BIT(31)
|
|
#define EMAC_CPPI_EOP_BIT BIT(30)
|
|
#define EMAC_CPPI_OWNERSHIP_BIT BIT(29)
|
|
#define EMAC_CPPI_EOQ_BIT BIT(28)
|
|
#define EMAC_CPPI_TEARDOWN_COMPLETE_BIT BIT(27)
|
|
#define EMAC_CPPI_PASS_CRC_BIT BIT(26)
|
|
#define EMAC_RX_BD_BUF_SIZE (0xFFFF)
|
|
#define EMAC_BD_LENGTH_FOR_CACHE (16) /* only CPPI bytes */
|
|
#define EMAC_RX_BD_PKT_LENGTH_MASK (0xFFFF)
|
|
|
|
/* Max hardware defines */
|
|
#define EMAC_MAX_TXRX_CHANNELS (8) /* Max hardware channels */
|
|
#define EMAC_DEF_MAX_MULTICAST_ADDRESSES (64) /* Max mcast addr's */
|
|
|
|
/* EMAC Peripheral Device Register Memory Layout structure */
|
|
#define EMAC_MACINVECTOR 0x90
|
|
|
|
#define EMAC_DM646X_MACEOIVECTOR 0x94
|
|
|
|
#define EMAC_MACINTSTATRAW 0xB0
|
|
#define EMAC_MACINTSTATMASKED 0xB4
|
|
#define EMAC_MACINTMASKSET 0xB8
|
|
#define EMAC_MACINTMASKCLEAR 0xBC
|
|
|
|
#define EMAC_RXMBPENABLE 0x100
|
|
#define EMAC_RXUNICASTSET 0x104
|
|
#define EMAC_RXUNICASTCLEAR 0x108
|
|
#define EMAC_RXMAXLEN 0x10C
|
|
#define EMAC_RXBUFFEROFFSET 0x110
|
|
#define EMAC_RXFILTERLOWTHRESH 0x114
|
|
|
|
#define EMAC_MACCONTROL 0x160
|
|
#define EMAC_MACSTATUS 0x164
|
|
#define EMAC_EMCONTROL 0x168
|
|
#define EMAC_FIFOCONTROL 0x16C
|
|
#define EMAC_MACCONFIG 0x170
|
|
#define EMAC_SOFTRESET 0x174
|
|
#define EMAC_MACSRCADDRLO 0x1D0
|
|
#define EMAC_MACSRCADDRHI 0x1D4
|
|
#define EMAC_MACHASH1 0x1D8
|
|
#define EMAC_MACHASH2 0x1DC
|
|
#define EMAC_MACADDRLO 0x500
|
|
#define EMAC_MACADDRHI 0x504
|
|
#define EMAC_MACINDEX 0x508
|
|
|
|
/* EMAC statistics registers */
|
|
#define EMAC_RXGOODFRAMES 0x200
|
|
#define EMAC_RXBCASTFRAMES 0x204
|
|
#define EMAC_RXMCASTFRAMES 0x208
|
|
#define EMAC_RXPAUSEFRAMES 0x20C
|
|
#define EMAC_RXCRCERRORS 0x210
|
|
#define EMAC_RXALIGNCODEERRORS 0x214
|
|
#define EMAC_RXOVERSIZED 0x218
|
|
#define EMAC_RXJABBER 0x21C
|
|
#define EMAC_RXUNDERSIZED 0x220
|
|
#define EMAC_RXFRAGMENTS 0x224
|
|
#define EMAC_RXFILTERED 0x228
|
|
#define EMAC_RXQOSFILTERED 0x22C
|
|
#define EMAC_RXOCTETS 0x230
|
|
#define EMAC_TXGOODFRAMES 0x234
|
|
#define EMAC_TXBCASTFRAMES 0x238
|
|
#define EMAC_TXMCASTFRAMES 0x23C
|
|
#define EMAC_TXPAUSEFRAMES 0x240
|
|
#define EMAC_TXDEFERRED 0x244
|
|
#define EMAC_TXCOLLISION 0x248
|
|
#define EMAC_TXSINGLECOLL 0x24C
|
|
#define EMAC_TXMULTICOLL 0x250
|
|
#define EMAC_TXEXCESSIVECOLL 0x254
|
|
#define EMAC_TXLATECOLL 0x258
|
|
#define EMAC_TXUNDERRUN 0x25C
|
|
#define EMAC_TXCARRIERSENSE 0x260
|
|
#define EMAC_TXOCTETS 0x264
|
|
#define EMAC_NETOCTETS 0x280
|
|
#define EMAC_RXSOFOVERRUNS 0x284
|
|
#define EMAC_RXMOFOVERRUNS 0x288
|
|
#define EMAC_RXDMAOVERRUNS 0x28C
|
|
|
|
/* EMAC DM644x control registers */
|
|
#define EMAC_CTRL_EWCTL (0x4)
|
|
#define EMAC_CTRL_EWINTTCNT (0x8)
|
|
|
|
/* EMAC DM644x control module masks */
|
|
#define EMAC_DM644X_EWINTCNT_MASK 0x1FFFF
|
|
#define EMAC_DM644X_INTMIN_INTVL 0x1
|
|
#define EMAC_DM644X_INTMAX_INTVL (EMAC_DM644X_EWINTCNT_MASK)
|
|
|
|
/* EMAC DM646X control module registers */
|
|
#define EMAC_DM646X_CMINTCTRL 0x0C
|
|
#define EMAC_DM646X_CMRXINTEN 0x14
|
|
#define EMAC_DM646X_CMTXINTEN 0x18
|
|
#define EMAC_DM646X_CMRXINTMAX 0x70
|
|
#define EMAC_DM646X_CMTXINTMAX 0x74
|
|
|
|
/* EMAC DM646X control module masks */
|
|
#define EMAC_DM646X_INTPACEEN (0x3 << 16)
|
|
#define EMAC_DM646X_INTPRESCALE_MASK (0x7FF << 0)
|
|
#define EMAC_DM646X_CMINTMAX_CNT 63
|
|
#define EMAC_DM646X_CMINTMIN_CNT 2
|
|
#define EMAC_DM646X_CMINTMAX_INTVL (1000 / EMAC_DM646X_CMINTMIN_CNT)
|
|
#define EMAC_DM646X_CMINTMIN_INTVL ((1000 / EMAC_DM646X_CMINTMAX_CNT) + 1)
|
|
|
|
|
|
/* EMAC EOI codes for C0 */
|
|
#define EMAC_DM646X_MAC_EOI_C0_RXEN (0x01)
|
|
#define EMAC_DM646X_MAC_EOI_C0_TXEN (0x02)
|
|
|
|
/* EMAC Stats Clear Mask */
|
|
#define EMAC_STATS_CLR_MASK (0xFFFFFFFF)
|
|
|
|
/* emac_priv: EMAC private data structure
|
|
*
|
|
* EMAC adapter private data structure
|
|
*/
|
|
struct emac_priv {
|
|
u32 msg_enable;
|
|
struct net_device *ndev;
|
|
struct platform_device *pdev;
|
|
struct napi_struct napi;
|
|
char mac_addr[6];
|
|
void __iomem *remap_addr;
|
|
u32 emac_base_phys;
|
|
void __iomem *emac_base;
|
|
void __iomem *ctrl_base;
|
|
struct cpdma_ctlr *dma;
|
|
struct cpdma_chan *txchan;
|
|
struct cpdma_chan *rxchan;
|
|
u32 link; /* 1=link on, 0=link off */
|
|
u32 speed; /* 0=Auto Neg, 1=No PHY, 10,100, 1000 - mbps */
|
|
u32 duplex; /* Link duplex: 0=Half, 1=Full */
|
|
u32 rx_buf_size;
|
|
u32 isr_count;
|
|
u32 coal_intvl;
|
|
u32 bus_freq_mhz;
|
|
u8 rmii_en;
|
|
u8 version;
|
|
u32 mac_hash1;
|
|
u32 mac_hash2;
|
|
u32 multicast_hash_cnt[EMAC_NUM_MULTICAST_BITS];
|
|
u32 rx_addr_type;
|
|
const char *phy_id;
|
|
struct phy_device *phydev;
|
|
spinlock_t lock;
|
|
/*platform specific members*/
|
|
void (*int_enable) (void);
|
|
void (*int_disable) (void);
|
|
};
|
|
|
|
/* clock frequency for EMAC */
|
|
static struct clk *emac_clk;
|
|
static unsigned long emac_bus_frequency;
|
|
|
|
/* EMAC TX Host Error description strings */
|
|
static char *emac_txhost_errcodes[16] = {
|
|
"No error", "SOP error", "Ownership bit not set in SOP buffer",
|
|
"Zero Next Buffer Descriptor Pointer Without EOP",
|
|
"Zero Buffer Pointer", "Zero Buffer Length", "Packet Length Error",
|
|
"Reserved", "Reserved", "Reserved", "Reserved", "Reserved",
|
|
"Reserved", "Reserved", "Reserved", "Reserved"
|
|
};
|
|
|
|
/* EMAC RX Host Error description strings */
|
|
static char *emac_rxhost_errcodes[16] = {
|
|
"No error", "Reserved", "Ownership bit not set in input buffer",
|
|
"Reserved", "Zero Buffer Pointer", "Reserved", "Reserved",
|
|
"Reserved", "Reserved", "Reserved", "Reserved", "Reserved",
|
|
"Reserved", "Reserved", "Reserved", "Reserved"
|
|
};
|
|
|
|
/* Helper macros */
|
|
#define emac_read(reg) ioread32(priv->emac_base + (reg))
|
|
#define emac_write(reg, val) iowrite32(val, priv->emac_base + (reg))
|
|
|
|
#define emac_ctrl_read(reg) ioread32((priv->ctrl_base + (reg)))
|
|
#define emac_ctrl_write(reg, val) iowrite32(val, (priv->ctrl_base + (reg)))
|
|
|
|
/**
|
|
* emac_dump_regs: Dump important EMAC registers to debug terminal
|
|
* @priv: The DaVinci EMAC private adapter structure
|
|
*
|
|
* Executes ethtool set cmd & sets phy mode
|
|
*
|
|
*/
|
|
static void emac_dump_regs(struct emac_priv *priv)
|
|
{
|
|
struct device *emac_dev = &priv->ndev->dev;
|
|
|
|
/* Print important registers in EMAC */
|
|
dev_info(emac_dev, "EMAC Basic registers\n");
|
|
if (priv->version == EMAC_VERSION_1) {
|
|
dev_info(emac_dev, "EMAC: EWCTL: %08X, EWINTTCNT: %08X\n",
|
|
emac_ctrl_read(EMAC_CTRL_EWCTL),
|
|
emac_ctrl_read(EMAC_CTRL_EWINTTCNT));
|
|
}
|
|
dev_info(emac_dev, "EMAC: EmuControl:%08X, FifoControl: %08X\n",
|
|
emac_read(EMAC_EMCONTROL), emac_read(EMAC_FIFOCONTROL));
|
|
dev_info(emac_dev, "EMAC: MBPEnable:%08X, RXUnicastSet: %08X, "\
|
|
"RXMaxLen=%08X\n", emac_read(EMAC_RXMBPENABLE),
|
|
emac_read(EMAC_RXUNICASTSET), emac_read(EMAC_RXMAXLEN));
|
|
dev_info(emac_dev, "EMAC: MacControl:%08X, MacStatus: %08X, "\
|
|
"MacConfig=%08X\n", emac_read(EMAC_MACCONTROL),
|
|
emac_read(EMAC_MACSTATUS), emac_read(EMAC_MACCONFIG));
|
|
dev_info(emac_dev, "EMAC Statistics\n");
|
|
dev_info(emac_dev, "EMAC: rx_good_frames:%d\n",
|
|
emac_read(EMAC_RXGOODFRAMES));
|
|
dev_info(emac_dev, "EMAC: rx_broadcast_frames:%d\n",
|
|
emac_read(EMAC_RXBCASTFRAMES));
|
|
dev_info(emac_dev, "EMAC: rx_multicast_frames:%d\n",
|
|
emac_read(EMAC_RXMCASTFRAMES));
|
|
dev_info(emac_dev, "EMAC: rx_pause_frames:%d\n",
|
|
emac_read(EMAC_RXPAUSEFRAMES));
|
|
dev_info(emac_dev, "EMAC: rx_crcerrors:%d\n",
|
|
emac_read(EMAC_RXCRCERRORS));
|
|
dev_info(emac_dev, "EMAC: rx_align_code_errors:%d\n",
|
|
emac_read(EMAC_RXALIGNCODEERRORS));
|
|
dev_info(emac_dev, "EMAC: rx_oversized_frames:%d\n",
|
|
emac_read(EMAC_RXOVERSIZED));
|
|
dev_info(emac_dev, "EMAC: rx_jabber_frames:%d\n",
|
|
emac_read(EMAC_RXJABBER));
|
|
dev_info(emac_dev, "EMAC: rx_undersized_frames:%d\n",
|
|
emac_read(EMAC_RXUNDERSIZED));
|
|
dev_info(emac_dev, "EMAC: rx_fragments:%d\n",
|
|
emac_read(EMAC_RXFRAGMENTS));
|
|
dev_info(emac_dev, "EMAC: rx_filtered_frames:%d\n",
|
|
emac_read(EMAC_RXFILTERED));
|
|
dev_info(emac_dev, "EMAC: rx_qos_filtered_frames:%d\n",
|
|
emac_read(EMAC_RXQOSFILTERED));
|
|
dev_info(emac_dev, "EMAC: rx_octets:%d\n",
|
|
emac_read(EMAC_RXOCTETS));
|
|
dev_info(emac_dev, "EMAC: tx_goodframes:%d\n",
|
|
emac_read(EMAC_TXGOODFRAMES));
|
|
dev_info(emac_dev, "EMAC: tx_bcastframes:%d\n",
|
|
emac_read(EMAC_TXBCASTFRAMES));
|
|
dev_info(emac_dev, "EMAC: tx_mcastframes:%d\n",
|
|
emac_read(EMAC_TXMCASTFRAMES));
|
|
dev_info(emac_dev, "EMAC: tx_pause_frames:%d\n",
|
|
emac_read(EMAC_TXPAUSEFRAMES));
|
|
dev_info(emac_dev, "EMAC: tx_deferred_frames:%d\n",
|
|
emac_read(EMAC_TXDEFERRED));
|
|
dev_info(emac_dev, "EMAC: tx_collision_frames:%d\n",
|
|
emac_read(EMAC_TXCOLLISION));
|
|
dev_info(emac_dev, "EMAC: tx_single_coll_frames:%d\n",
|
|
emac_read(EMAC_TXSINGLECOLL));
|
|
dev_info(emac_dev, "EMAC: tx_mult_coll_frames:%d\n",
|
|
emac_read(EMAC_TXMULTICOLL));
|
|
dev_info(emac_dev, "EMAC: tx_excessive_collisions:%d\n",
|
|
emac_read(EMAC_TXEXCESSIVECOLL));
|
|
dev_info(emac_dev, "EMAC: tx_late_collisions:%d\n",
|
|
emac_read(EMAC_TXLATECOLL));
|
|
dev_info(emac_dev, "EMAC: tx_underrun:%d\n",
|
|
emac_read(EMAC_TXUNDERRUN));
|
|
dev_info(emac_dev, "EMAC: tx_carrier_sense_errors:%d\n",
|
|
emac_read(EMAC_TXCARRIERSENSE));
|
|
dev_info(emac_dev, "EMAC: tx_octets:%d\n",
|
|
emac_read(EMAC_TXOCTETS));
|
|
dev_info(emac_dev, "EMAC: net_octets:%d\n",
|
|
emac_read(EMAC_NETOCTETS));
|
|
dev_info(emac_dev, "EMAC: rx_sof_overruns:%d\n",
|
|
emac_read(EMAC_RXSOFOVERRUNS));
|
|
dev_info(emac_dev, "EMAC: rx_mof_overruns:%d\n",
|
|
emac_read(EMAC_RXMOFOVERRUNS));
|
|
dev_info(emac_dev, "EMAC: rx_dma_overruns:%d\n",
|
|
emac_read(EMAC_RXDMAOVERRUNS));
|
|
|
|
cpdma_ctlr_dump(priv->dma);
|
|
}
|
|
|
|
/**
|
|
* emac_get_drvinfo: Get EMAC driver information
|
|
* @ndev: The DaVinci EMAC network adapter
|
|
* @info: ethtool info structure containing name and version
|
|
*
|
|
* Returns EMAC driver information (name and version)
|
|
*
|
|
*/
|
|
static void emac_get_drvinfo(struct net_device *ndev,
|
|
struct ethtool_drvinfo *info)
|
|
{
|
|
strcpy(info->driver, emac_version_string);
|
|
strcpy(info->version, EMAC_MODULE_VERSION);
|
|
}
|
|
|
|
/**
|
|
* emac_get_settings: Get EMAC settings
|
|
* @ndev: The DaVinci EMAC network adapter
|
|
* @ecmd: ethtool command
|
|
*
|
|
* Executes ethool get command
|
|
*
|
|
*/
|
|
static int emac_get_settings(struct net_device *ndev,
|
|
struct ethtool_cmd *ecmd)
|
|
{
|
|
struct emac_priv *priv = netdev_priv(ndev);
|
|
if (priv->phydev)
|
|
return phy_ethtool_gset(priv->phydev, ecmd);
|
|
else
|
|
return -EOPNOTSUPP;
|
|
|
|
}
|
|
|
|
/**
|
|
* emac_set_settings: Set EMAC settings
|
|
* @ndev: The DaVinci EMAC network adapter
|
|
* @ecmd: ethtool command
|
|
*
|
|
* Executes ethool set command
|
|
*
|
|
*/
|
|
static int emac_set_settings(struct net_device *ndev, struct ethtool_cmd *ecmd)
|
|
{
|
|
struct emac_priv *priv = netdev_priv(ndev);
|
|
if (priv->phydev)
|
|
return phy_ethtool_sset(priv->phydev, ecmd);
|
|
else
|
|
return -EOPNOTSUPP;
|
|
|
|
}
|
|
|
|
/**
|
|
* emac_get_coalesce : Get interrupt coalesce settings for this device
|
|
* @ndev : The DaVinci EMAC network adapter
|
|
* @coal : ethtool coalesce settings structure
|
|
*
|
|
* Fetch the current interrupt coalesce settings
|
|
*
|
|
*/
|
|
static int emac_get_coalesce(struct net_device *ndev,
|
|
struct ethtool_coalesce *coal)
|
|
{
|
|
struct emac_priv *priv = netdev_priv(ndev);
|
|
|
|
coal->rx_coalesce_usecs = priv->coal_intvl;
|
|
return 0;
|
|
|
|
}
|
|
|
|
/**
|
|
* emac_set_coalesce : Set interrupt coalesce settings for this device
|
|
* @ndev : The DaVinci EMAC network adapter
|
|
* @coal : ethtool coalesce settings structure
|
|
*
|
|
* Set interrupt coalesce parameters
|
|
*
|
|
*/
|
|
static int emac_set_coalesce(struct net_device *ndev,
|
|
struct ethtool_coalesce *coal)
|
|
{
|
|
struct emac_priv *priv = netdev_priv(ndev);
|
|
u32 int_ctrl, num_interrupts = 0;
|
|
u32 prescale = 0, addnl_dvdr = 1, coal_intvl = 0;
|
|
|
|
if (!coal->rx_coalesce_usecs)
|
|
return -EINVAL;
|
|
|
|
coal_intvl = coal->rx_coalesce_usecs;
|
|
|
|
switch (priv->version) {
|
|
case EMAC_VERSION_2:
|
|
int_ctrl = emac_ctrl_read(EMAC_DM646X_CMINTCTRL);
|
|
prescale = priv->bus_freq_mhz * 4;
|
|
|
|
if (coal_intvl < EMAC_DM646X_CMINTMIN_INTVL)
|
|
coal_intvl = EMAC_DM646X_CMINTMIN_INTVL;
|
|
|
|
if (coal_intvl > EMAC_DM646X_CMINTMAX_INTVL) {
|
|
/*
|
|
* Interrupt pacer works with 4us Pulse, we can
|
|
* throttle further by dilating the 4us pulse.
|
|
*/
|
|
addnl_dvdr = EMAC_DM646X_INTPRESCALE_MASK / prescale;
|
|
|
|
if (addnl_dvdr > 1) {
|
|
prescale *= addnl_dvdr;
|
|
if (coal_intvl > (EMAC_DM646X_CMINTMAX_INTVL
|
|
* addnl_dvdr))
|
|
coal_intvl = (EMAC_DM646X_CMINTMAX_INTVL
|
|
* addnl_dvdr);
|
|
} else {
|
|
addnl_dvdr = 1;
|
|
coal_intvl = EMAC_DM646X_CMINTMAX_INTVL;
|
|
}
|
|
}
|
|
|
|
num_interrupts = (1000 * addnl_dvdr) / coal_intvl;
|
|
|
|
int_ctrl |= EMAC_DM646X_INTPACEEN;
|
|
int_ctrl &= (~EMAC_DM646X_INTPRESCALE_MASK);
|
|
int_ctrl |= (prescale & EMAC_DM646X_INTPRESCALE_MASK);
|
|
emac_ctrl_write(EMAC_DM646X_CMINTCTRL, int_ctrl);
|
|
|
|
emac_ctrl_write(EMAC_DM646X_CMRXINTMAX, num_interrupts);
|
|
emac_ctrl_write(EMAC_DM646X_CMTXINTMAX, num_interrupts);
|
|
|
|
break;
|
|
default:
|
|
int_ctrl = emac_ctrl_read(EMAC_CTRL_EWINTTCNT);
|
|
int_ctrl &= (~EMAC_DM644X_EWINTCNT_MASK);
|
|
prescale = coal_intvl * priv->bus_freq_mhz;
|
|
if (prescale > EMAC_DM644X_EWINTCNT_MASK) {
|
|
prescale = EMAC_DM644X_EWINTCNT_MASK;
|
|
coal_intvl = prescale / priv->bus_freq_mhz;
|
|
}
|
|
emac_ctrl_write(EMAC_CTRL_EWINTTCNT, (int_ctrl | prescale));
|
|
|
|
break;
|
|
}
|
|
|
|
printk(KERN_INFO"Set coalesce to %d usecs.\n", coal_intvl);
|
|
priv->coal_intvl = coal_intvl;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
/**
|
|
* ethtool_ops: DaVinci EMAC Ethtool structure
|
|
*
|
|
* Ethtool support for EMAC adapter
|
|
*
|
|
*/
|
|
static const struct ethtool_ops ethtool_ops = {
|
|
.get_drvinfo = emac_get_drvinfo,
|
|
.get_settings = emac_get_settings,
|
|
.set_settings = emac_set_settings,
|
|
.get_link = ethtool_op_get_link,
|
|
.get_coalesce = emac_get_coalesce,
|
|
.set_coalesce = emac_set_coalesce,
|
|
};
|
|
|
|
/**
|
|
* emac_update_phystatus: Update Phy status
|
|
* @priv: The DaVinci EMAC private adapter structure
|
|
*
|
|
* Updates phy status and takes action for network queue if required
|
|
* based upon link status
|
|
*
|
|
*/
|
|
static void emac_update_phystatus(struct emac_priv *priv)
|
|
{
|
|
u32 mac_control;
|
|
u32 new_duplex;
|
|
u32 cur_duplex;
|
|
struct net_device *ndev = priv->ndev;
|
|
|
|
mac_control = emac_read(EMAC_MACCONTROL);
|
|
cur_duplex = (mac_control & EMAC_MACCONTROL_FULLDUPLEXEN) ?
|
|
DUPLEX_FULL : DUPLEX_HALF;
|
|
if (priv->phydev)
|
|
new_duplex = priv->phydev->duplex;
|
|
else
|
|
new_duplex = DUPLEX_FULL;
|
|
|
|
/* We get called only if link has changed (speed/duplex/status) */
|
|
if ((priv->link) && (new_duplex != cur_duplex)) {
|
|
priv->duplex = new_duplex;
|
|
if (DUPLEX_FULL == priv->duplex)
|
|
mac_control |= (EMAC_MACCONTROL_FULLDUPLEXEN);
|
|
else
|
|
mac_control &= ~(EMAC_MACCONTROL_FULLDUPLEXEN);
|
|
}
|
|
|
|
if (priv->speed == SPEED_1000 && (priv->version == EMAC_VERSION_2)) {
|
|
mac_control = emac_read(EMAC_MACCONTROL);
|
|
mac_control |= (EMAC_DM646X_MACCONTORL_GIG |
|
|
EMAC_DM646X_MACCONTORL_GIGFORCE);
|
|
} else {
|
|
/* Clear the GIG bit and GIGFORCE bit */
|
|
mac_control &= ~(EMAC_DM646X_MACCONTORL_GIGFORCE |
|
|
EMAC_DM646X_MACCONTORL_GIG);
|
|
|
|
if (priv->rmii_en && (priv->speed == SPEED_100))
|
|
mac_control |= EMAC_MACCONTROL_RMIISPEED_MASK;
|
|
else
|
|
mac_control &= ~EMAC_MACCONTROL_RMIISPEED_MASK;
|
|
}
|
|
|
|
/* Update mac_control if changed */
|
|
emac_write(EMAC_MACCONTROL, mac_control);
|
|
|
|
if (priv->link) {
|
|
/* link ON */
|
|
if (!netif_carrier_ok(ndev))
|
|
netif_carrier_on(ndev);
|
|
/* reactivate the transmit queue if it is stopped */
|
|
if (netif_running(ndev) && netif_queue_stopped(ndev))
|
|
netif_wake_queue(ndev);
|
|
} else {
|
|
/* link OFF */
|
|
if (netif_carrier_ok(ndev))
|
|
netif_carrier_off(ndev);
|
|
if (!netif_queue_stopped(ndev))
|
|
netif_stop_queue(ndev);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* hash_get: Calculate hash value from mac address
|
|
* @addr: mac address to delete from hash table
|
|
*
|
|
* Calculates hash value from mac address
|
|
*
|
|
*/
|
|
static u32 hash_get(u8 *addr)
|
|
{
|
|
u32 hash;
|
|
u8 tmpval;
|
|
int cnt;
|
|
hash = 0;
|
|
|
|
for (cnt = 0; cnt < 2; cnt++) {
|
|
tmpval = *addr++;
|
|
hash ^= (tmpval >> 2) ^ (tmpval << 4);
|
|
tmpval = *addr++;
|
|
hash ^= (tmpval >> 4) ^ (tmpval << 2);
|
|
tmpval = *addr++;
|
|
hash ^= (tmpval >> 6) ^ (tmpval);
|
|
}
|
|
|
|
return hash & 0x3F;
|
|
}
|
|
|
|
/**
|
|
* hash_add: Hash function to add mac addr from hash table
|
|
* @priv: The DaVinci EMAC private adapter structure
|
|
* mac_addr: mac address to delete from hash table
|
|
*
|
|
* Adds mac address to the internal hash table
|
|
*
|
|
*/
|
|
static int hash_add(struct emac_priv *priv, u8 *mac_addr)
|
|
{
|
|
struct device *emac_dev = &priv->ndev->dev;
|
|
u32 rc = 0;
|
|
u32 hash_bit;
|
|
u32 hash_value = hash_get(mac_addr);
|
|
|
|
if (hash_value >= EMAC_NUM_MULTICAST_BITS) {
|
|
if (netif_msg_drv(priv)) {
|
|
dev_err(emac_dev, "DaVinci EMAC: hash_add(): Invalid "\
|
|
"Hash %08x, should not be greater than %08x",
|
|
hash_value, (EMAC_NUM_MULTICAST_BITS - 1));
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
/* set the hash bit only if not previously set */
|
|
if (priv->multicast_hash_cnt[hash_value] == 0) {
|
|
rc = 1; /* hash value changed */
|
|
if (hash_value < 32) {
|
|
hash_bit = BIT(hash_value);
|
|
priv->mac_hash1 |= hash_bit;
|
|
} else {
|
|
hash_bit = BIT((hash_value - 32));
|
|
priv->mac_hash2 |= hash_bit;
|
|
}
|
|
}
|
|
|
|
/* incr counter for num of mcast addr's mapped to "this" hash bit */
|
|
++priv->multicast_hash_cnt[hash_value];
|
|
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* hash_del: Hash function to delete mac addr from hash table
|
|
* @priv: The DaVinci EMAC private adapter structure
|
|
* mac_addr: mac address to delete from hash table
|
|
*
|
|
* Removes mac address from the internal hash table
|
|
*
|
|
*/
|
|
static int hash_del(struct emac_priv *priv, u8 *mac_addr)
|
|
{
|
|
u32 hash_value;
|
|
u32 hash_bit;
|
|
|
|
hash_value = hash_get(mac_addr);
|
|
if (priv->multicast_hash_cnt[hash_value] > 0) {
|
|
/* dec cntr for num of mcast addr's mapped to this hash bit */
|
|
--priv->multicast_hash_cnt[hash_value];
|
|
}
|
|
|
|
/* if counter still > 0, at least one multicast address refers
|
|
* to this hash bit. so return 0 */
|
|
if (priv->multicast_hash_cnt[hash_value] > 0)
|
|
return 0;
|
|
|
|
if (hash_value < 32) {
|
|
hash_bit = BIT(hash_value);
|
|
priv->mac_hash1 &= ~hash_bit;
|
|
} else {
|
|
hash_bit = BIT((hash_value - 32));
|
|
priv->mac_hash2 &= ~hash_bit;
|
|
}
|
|
|
|
/* return 1 to indicate change in mac_hash registers reqd */
|
|
return 1;
|
|
}
|
|
|
|
/* EMAC multicast operation */
|
|
#define EMAC_MULTICAST_ADD 0
|
|
#define EMAC_MULTICAST_DEL 1
|
|
#define EMAC_ALL_MULTI_SET 2
|
|
#define EMAC_ALL_MULTI_CLR 3
|
|
|
|
/**
|
|
* emac_add_mcast: Set multicast address in the EMAC adapter (Internal)
|
|
* @priv: The DaVinci EMAC private adapter structure
|
|
* @action: multicast operation to perform
|
|
* mac_addr: mac address to set
|
|
*
|
|
* Set multicast addresses in EMAC adapter - internal function
|
|
*
|
|
*/
|
|
static void emac_add_mcast(struct emac_priv *priv, u32 action, u8 *mac_addr)
|
|
{
|
|
struct device *emac_dev = &priv->ndev->dev;
|
|
int update = -1;
|
|
|
|
switch (action) {
|
|
case EMAC_MULTICAST_ADD:
|
|
update = hash_add(priv, mac_addr);
|
|
break;
|
|
case EMAC_MULTICAST_DEL:
|
|
update = hash_del(priv, mac_addr);
|
|
break;
|
|
case EMAC_ALL_MULTI_SET:
|
|
update = 1;
|
|
priv->mac_hash1 = EMAC_ALL_MULTI_REG_VALUE;
|
|
priv->mac_hash2 = EMAC_ALL_MULTI_REG_VALUE;
|
|
break;
|
|
case EMAC_ALL_MULTI_CLR:
|
|
update = 1;
|
|
priv->mac_hash1 = 0;
|
|
priv->mac_hash2 = 0;
|
|
memset(&(priv->multicast_hash_cnt[0]), 0,
|
|
sizeof(priv->multicast_hash_cnt[0]) *
|
|
EMAC_NUM_MULTICAST_BITS);
|
|
break;
|
|
default:
|
|
if (netif_msg_drv(priv))
|
|
dev_err(emac_dev, "DaVinci EMAC: add_mcast"\
|
|
": bad operation %d", action);
|
|
break;
|
|
}
|
|
|
|
/* write to the hardware only if the register status chances */
|
|
if (update > 0) {
|
|
emac_write(EMAC_MACHASH1, priv->mac_hash1);
|
|
emac_write(EMAC_MACHASH2, priv->mac_hash2);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* emac_dev_mcast_set: Set multicast address in the EMAC adapter
|
|
* @ndev: The DaVinci EMAC network adapter
|
|
*
|
|
* Set multicast addresses in EMAC adapter
|
|
*
|
|
*/
|
|
static void emac_dev_mcast_set(struct net_device *ndev)
|
|
{
|
|
u32 mbp_enable;
|
|
struct emac_priv *priv = netdev_priv(ndev);
|
|
|
|
mbp_enable = emac_read(EMAC_RXMBPENABLE);
|
|
if (ndev->flags & IFF_PROMISC) {
|
|
mbp_enable &= (~EMAC_MBP_PROMISCCH(EMAC_DEF_PROM_CH));
|
|
mbp_enable |= (EMAC_MBP_RXPROMISC);
|
|
} else {
|
|
mbp_enable = (mbp_enable & ~EMAC_MBP_RXPROMISC);
|
|
if ((ndev->flags & IFF_ALLMULTI) ||
|
|
netdev_mc_count(ndev) > EMAC_DEF_MAX_MULTICAST_ADDRESSES) {
|
|
mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST);
|
|
emac_add_mcast(priv, EMAC_ALL_MULTI_SET, NULL);
|
|
}
|
|
if (!netdev_mc_empty(ndev)) {
|
|
struct netdev_hw_addr *ha;
|
|
|
|
mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST);
|
|
emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL);
|
|
/* program multicast address list into EMAC hardware */
|
|
netdev_for_each_mc_addr(ha, ndev) {
|
|
emac_add_mcast(priv, EMAC_MULTICAST_ADD,
|
|
(u8 *) ha->addr);
|
|
}
|
|
} else {
|
|
mbp_enable = (mbp_enable & ~EMAC_MBP_RXMCAST);
|
|
emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL);
|
|
}
|
|
}
|
|
/* Set mbp config register */
|
|
emac_write(EMAC_RXMBPENABLE, mbp_enable);
|
|
}
|
|
|
|
/*************************************************************************
|
|
* EMAC Hardware manipulation
|
|
*************************************************************************/
|
|
|
|
/**
|
|
* emac_int_disable: Disable EMAC module interrupt (from adapter)
|
|
* @priv: The DaVinci EMAC private adapter structure
|
|
*
|
|
* Disable EMAC interrupt on the adapter
|
|
*
|
|
*/
|
|
static void emac_int_disable(struct emac_priv *priv)
|
|
{
|
|
if (priv->version == EMAC_VERSION_2) {
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
/* Program C0_Int_En to zero to turn off
|
|
* interrupts to the CPU */
|
|
emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0x0);
|
|
emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0x0);
|
|
/* NOTE: Rx Threshold and Misc interrupts are not disabled */
|
|
if (priv->int_disable)
|
|
priv->int_disable();
|
|
|
|
local_irq_restore(flags);
|
|
|
|
} else {
|
|
/* Set DM644x control registers for interrupt control */
|
|
emac_ctrl_write(EMAC_CTRL_EWCTL, 0x0);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* emac_int_enable: Enable EMAC module interrupt (from adapter)
|
|
* @priv: The DaVinci EMAC private adapter structure
|
|
*
|
|
* Enable EMAC interrupt on the adapter
|
|
*
|
|
*/
|
|
static void emac_int_enable(struct emac_priv *priv)
|
|
{
|
|
if (priv->version == EMAC_VERSION_2) {
|
|
if (priv->int_enable)
|
|
priv->int_enable();
|
|
|
|
emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0xff);
|
|
emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0xff);
|
|
|
|
/* In addition to turning on interrupt Enable, we need
|
|
* ack by writing appropriate values to the EOI
|
|
* register */
|
|
|
|
/* NOTE: Rx Threshold and Misc interrupts are not enabled */
|
|
|
|
/* ack rxen only then a new pulse will be generated */
|
|
emac_write(EMAC_DM646X_MACEOIVECTOR,
|
|
EMAC_DM646X_MAC_EOI_C0_RXEN);
|
|
|
|
/* ack txen- only then a new pulse will be generated */
|
|
emac_write(EMAC_DM646X_MACEOIVECTOR,
|
|
EMAC_DM646X_MAC_EOI_C0_TXEN);
|
|
|
|
} else {
|
|
/* Set DM644x control registers for interrupt control */
|
|
emac_ctrl_write(EMAC_CTRL_EWCTL, 0x1);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* emac_irq: EMAC interrupt handler
|
|
* @irq: interrupt number
|
|
* @dev_id: EMAC network adapter data structure ptr
|
|
*
|
|
* EMAC Interrupt handler - we only schedule NAPI and not process any packets
|
|
* here. EVen the interrupt status is checked (TX/RX/Err) in NAPI poll function
|
|
*
|
|
* Returns interrupt handled condition
|
|
*/
|
|
static irqreturn_t emac_irq(int irq, void *dev_id)
|
|
{
|
|
struct net_device *ndev = (struct net_device *)dev_id;
|
|
struct emac_priv *priv = netdev_priv(ndev);
|
|
|
|
++priv->isr_count;
|
|
if (likely(netif_running(priv->ndev))) {
|
|
emac_int_disable(priv);
|
|
napi_schedule(&priv->napi);
|
|
} else {
|
|
/* we are closing down, so dont process anything */
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct sk_buff *emac_rx_alloc(struct emac_priv *priv)
|
|
{
|
|
struct sk_buff *skb = dev_alloc_skb(priv->rx_buf_size);
|
|
if (WARN_ON(!skb))
|
|
return NULL;
|
|
skb->dev = priv->ndev;
|
|
skb_reserve(skb, NET_IP_ALIGN);
|
|
return skb;
|
|
}
|
|
|
|
static void emac_rx_handler(void *token, int len, int status)
|
|
{
|
|
struct sk_buff *skb = token;
|
|
struct net_device *ndev = skb->dev;
|
|
struct emac_priv *priv = netdev_priv(ndev);
|
|
struct device *emac_dev = &ndev->dev;
|
|
int ret;
|
|
|
|
/* free and bail if we are shutting down */
|
|
if (unlikely(!netif_running(ndev) || !netif_carrier_ok(ndev))) {
|
|
dev_kfree_skb_any(skb);
|
|
return;
|
|
}
|
|
|
|
/* recycle on recieve error */
|
|
if (status < 0) {
|
|
ndev->stats.rx_errors++;
|
|
goto recycle;
|
|
}
|
|
|
|
/* feed received packet up the stack */
|
|
skb_put(skb, len);
|
|
skb->protocol = eth_type_trans(skb, ndev);
|
|
netif_receive_skb(skb);
|
|
ndev->stats.rx_bytes += len;
|
|
ndev->stats.rx_packets++;
|
|
|
|
/* alloc a new packet for receive */
|
|
skb = emac_rx_alloc(priv);
|
|
if (!skb) {
|
|
if (netif_msg_rx_err(priv) && net_ratelimit())
|
|
dev_err(emac_dev, "failed rx buffer alloc\n");
|
|
return;
|
|
}
|
|
|
|
recycle:
|
|
ret = cpdma_chan_submit(priv->rxchan, skb, skb->data,
|
|
skb_tailroom(skb), GFP_KERNEL);
|
|
if (WARN_ON(ret < 0))
|
|
dev_kfree_skb_any(skb);
|
|
}
|
|
|
|
static void emac_tx_handler(void *token, int len, int status)
|
|
{
|
|
struct sk_buff *skb = token;
|
|
struct net_device *ndev = skb->dev;
|
|
|
|
if (unlikely(netif_queue_stopped(ndev)))
|
|
netif_start_queue(ndev);
|
|
ndev->stats.tx_packets++;
|
|
ndev->stats.tx_bytes += len;
|
|
dev_kfree_skb_any(skb);
|
|
}
|
|
|
|
/**
|
|
* emac_dev_xmit: EMAC Transmit function
|
|
* @skb: SKB pointer
|
|
* @ndev: The DaVinci EMAC network adapter
|
|
*
|
|
* Called by the system to transmit a packet - we queue the packet in
|
|
* EMAC hardware transmit queue
|
|
*
|
|
* Returns success(NETDEV_TX_OK) or error code (typically out of desc's)
|
|
*/
|
|
static int emac_dev_xmit(struct sk_buff *skb, struct net_device *ndev)
|
|
{
|
|
struct device *emac_dev = &ndev->dev;
|
|
int ret_code;
|
|
struct emac_priv *priv = netdev_priv(ndev);
|
|
|
|
/* If no link, return */
|
|
if (unlikely(!priv->link)) {
|
|
if (netif_msg_tx_err(priv) && net_ratelimit())
|
|
dev_err(emac_dev, "DaVinci EMAC: No link to transmit");
|
|
goto fail_tx;
|
|
}
|
|
|
|
ret_code = skb_padto(skb, EMAC_DEF_MIN_ETHPKTSIZE);
|
|
if (unlikely(ret_code < 0)) {
|
|
if (netif_msg_tx_err(priv) && net_ratelimit())
|
|
dev_err(emac_dev, "DaVinci EMAC: packet pad failed");
|
|
goto fail_tx;
|
|
}
|
|
|
|
ret_code = cpdma_chan_submit(priv->txchan, skb, skb->data, skb->len,
|
|
GFP_KERNEL);
|
|
if (unlikely(ret_code != 0)) {
|
|
if (netif_msg_tx_err(priv) && net_ratelimit())
|
|
dev_err(emac_dev, "DaVinci EMAC: desc submit failed");
|
|
goto fail_tx;
|
|
}
|
|
|
|
return NETDEV_TX_OK;
|
|
|
|
fail_tx:
|
|
ndev->stats.tx_dropped++;
|
|
netif_stop_queue(ndev);
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
/**
|
|
* emac_dev_tx_timeout: EMAC Transmit timeout function
|
|
* @ndev: The DaVinci EMAC network adapter
|
|
*
|
|
* Called when system detects that a skb timeout period has expired
|
|
* potentially due to a fault in the adapter in not being able to send
|
|
* it out on the wire. We teardown the TX channel assuming a hardware
|
|
* error and re-initialize the TX channel for hardware operation
|
|
*
|
|
*/
|
|
static void emac_dev_tx_timeout(struct net_device *ndev)
|
|
{
|
|
struct emac_priv *priv = netdev_priv(ndev);
|
|
struct device *emac_dev = &ndev->dev;
|
|
|
|
if (netif_msg_tx_err(priv))
|
|
dev_err(emac_dev, "DaVinci EMAC: xmit timeout, restarting TX");
|
|
|
|
emac_dump_regs(priv);
|
|
|
|
ndev->stats.tx_errors++;
|
|
emac_int_disable(priv);
|
|
cpdma_chan_stop(priv->txchan);
|
|
cpdma_chan_start(priv->txchan);
|
|
emac_int_enable(priv);
|
|
}
|
|
|
|
/**
|
|
* emac_set_type0addr: Set EMAC Type0 mac address
|
|
* @priv: The DaVinci EMAC private adapter structure
|
|
* @ch: RX channel number
|
|
* @mac_addr: MAC address to set in device
|
|
*
|
|
* Called internally to set Type0 mac address of the adapter (Device)
|
|
*
|
|
* Returns success (0) or appropriate error code (none as of now)
|
|
*/
|
|
static void emac_set_type0addr(struct emac_priv *priv, u32 ch, char *mac_addr)
|
|
{
|
|
u32 val;
|
|
val = ((mac_addr[5] << 8) | (mac_addr[4]));
|
|
emac_write(EMAC_MACSRCADDRLO, val);
|
|
|
|
val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \
|
|
(mac_addr[1] << 8) | (mac_addr[0]));
|
|
emac_write(EMAC_MACSRCADDRHI, val);
|
|
val = emac_read(EMAC_RXUNICASTSET);
|
|
val |= BIT(ch);
|
|
emac_write(EMAC_RXUNICASTSET, val);
|
|
val = emac_read(EMAC_RXUNICASTCLEAR);
|
|
val &= ~BIT(ch);
|
|
emac_write(EMAC_RXUNICASTCLEAR, val);
|
|
}
|
|
|
|
/**
|
|
* emac_set_type1addr: Set EMAC Type1 mac address
|
|
* @priv: The DaVinci EMAC private adapter structure
|
|
* @ch: RX channel number
|
|
* @mac_addr: MAC address to set in device
|
|
*
|
|
* Called internally to set Type1 mac address of the adapter (Device)
|
|
*
|
|
* Returns success (0) or appropriate error code (none as of now)
|
|
*/
|
|
static void emac_set_type1addr(struct emac_priv *priv, u32 ch, char *mac_addr)
|
|
{
|
|
u32 val;
|
|
emac_write(EMAC_MACINDEX, ch);
|
|
val = ((mac_addr[5] << 8) | mac_addr[4]);
|
|
emac_write(EMAC_MACADDRLO, val);
|
|
val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \
|
|
(mac_addr[1] << 8) | (mac_addr[0]));
|
|
emac_write(EMAC_MACADDRHI, val);
|
|
emac_set_type0addr(priv, ch, mac_addr);
|
|
}
|
|
|
|
/**
|
|
* emac_set_type2addr: Set EMAC Type2 mac address
|
|
* @priv: The DaVinci EMAC private adapter structure
|
|
* @ch: RX channel number
|
|
* @mac_addr: MAC address to set in device
|
|
* @index: index into RX address entries
|
|
* @match: match parameter for RX address matching logic
|
|
*
|
|
* Called internally to set Type2 mac address of the adapter (Device)
|
|
*
|
|
* Returns success (0) or appropriate error code (none as of now)
|
|
*/
|
|
static void emac_set_type2addr(struct emac_priv *priv, u32 ch,
|
|
char *mac_addr, int index, int match)
|
|
{
|
|
u32 val;
|
|
emac_write(EMAC_MACINDEX, index);
|
|
val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \
|
|
(mac_addr[1] << 8) | (mac_addr[0]));
|
|
emac_write(EMAC_MACADDRHI, val);
|
|
val = ((mac_addr[5] << 8) | mac_addr[4] | ((ch & 0x7) << 16) | \
|
|
(match << 19) | BIT(20));
|
|
emac_write(EMAC_MACADDRLO, val);
|
|
emac_set_type0addr(priv, ch, mac_addr);
|
|
}
|
|
|
|
/**
|
|
* emac_setmac: Set mac address in the adapter (internal function)
|
|
* @priv: The DaVinci EMAC private adapter structure
|
|
* @ch: RX channel number
|
|
* @mac_addr: MAC address to set in device
|
|
*
|
|
* Called internally to set the mac address of the adapter (Device)
|
|
*
|
|
* Returns success (0) or appropriate error code (none as of now)
|
|
*/
|
|
static void emac_setmac(struct emac_priv *priv, u32 ch, char *mac_addr)
|
|
{
|
|
struct device *emac_dev = &priv->ndev->dev;
|
|
|
|
if (priv->rx_addr_type == 0) {
|
|
emac_set_type0addr(priv, ch, mac_addr);
|
|
} else if (priv->rx_addr_type == 1) {
|
|
u32 cnt;
|
|
for (cnt = 0; cnt < EMAC_MAX_TXRX_CHANNELS; cnt++)
|
|
emac_set_type1addr(priv, ch, mac_addr);
|
|
} else if (priv->rx_addr_type == 2) {
|
|
emac_set_type2addr(priv, ch, mac_addr, ch, 1);
|
|
emac_set_type0addr(priv, ch, mac_addr);
|
|
} else {
|
|
if (netif_msg_drv(priv))
|
|
dev_err(emac_dev, "DaVinci EMAC: Wrong addressing\n");
|
|
}
|
|
}
|
|
|
|
/**
|
|
* emac_dev_setmac_addr: Set mac address in the adapter
|
|
* @ndev: The DaVinci EMAC network adapter
|
|
* @addr: MAC address to set in device
|
|
*
|
|
* Called by the system to set the mac address of the adapter (Device)
|
|
*
|
|
* Returns success (0) or appropriate error code (none as of now)
|
|
*/
|
|
static int emac_dev_setmac_addr(struct net_device *ndev, void *addr)
|
|
{
|
|
struct emac_priv *priv = netdev_priv(ndev);
|
|
struct device *emac_dev = &priv->ndev->dev;
|
|
struct sockaddr *sa = addr;
|
|
|
|
if (!is_valid_ether_addr(sa->sa_data))
|
|
return -EINVAL;
|
|
|
|
/* Store mac addr in priv and rx channel and set it in EMAC hw */
|
|
memcpy(priv->mac_addr, sa->sa_data, ndev->addr_len);
|
|
memcpy(ndev->dev_addr, sa->sa_data, ndev->addr_len);
|
|
|
|
/* MAC address is configured only after the interface is enabled. */
|
|
if (netif_running(ndev)) {
|
|
memcpy(priv->mac_addr, sa->sa_data, ndev->addr_len);
|
|
emac_setmac(priv, EMAC_DEF_RX_CH, priv->mac_addr);
|
|
}
|
|
|
|
if (netif_msg_drv(priv))
|
|
dev_notice(emac_dev, "DaVinci EMAC: emac_dev_setmac_addr %pM\n",
|
|
priv->mac_addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* emac_hw_enable: Enable EMAC hardware for packet transmission/reception
|
|
* @priv: The DaVinci EMAC private adapter structure
|
|
*
|
|
* Enables EMAC hardware for packet processing - enables PHY, enables RX
|
|
* for packet reception and enables device interrupts and then NAPI
|
|
*
|
|
* Returns success (0) or appropriate error code (none right now)
|
|
*/
|
|
static int emac_hw_enable(struct emac_priv *priv)
|
|
{
|
|
u32 val, mbp_enable, mac_control;
|
|
|
|
/* Soft reset */
|
|
emac_write(EMAC_SOFTRESET, 1);
|
|
while (emac_read(EMAC_SOFTRESET))
|
|
cpu_relax();
|
|
|
|
/* Disable interrupt & Set pacing for more interrupts initially */
|
|
emac_int_disable(priv);
|
|
|
|
/* Full duplex enable bit set when auto negotiation happens */
|
|
mac_control =
|
|
(((EMAC_DEF_TXPRIO_FIXED) ? (EMAC_MACCONTROL_TXPTYPE) : 0x0) |
|
|
((priv->speed == 1000) ? EMAC_MACCONTROL_GIGABITEN : 0x0) |
|
|
((EMAC_DEF_TXPACING_EN) ? (EMAC_MACCONTROL_TXPACEEN) : 0x0) |
|
|
((priv->duplex == DUPLEX_FULL) ? 0x1 : 0));
|
|
emac_write(EMAC_MACCONTROL, mac_control);
|
|
|
|
mbp_enable =
|
|
(((EMAC_DEF_PASS_CRC) ? (EMAC_RXMBP_PASSCRC_MASK) : 0x0) |
|
|
((EMAC_DEF_QOS_EN) ? (EMAC_RXMBP_QOSEN_MASK) : 0x0) |
|
|
((EMAC_DEF_NO_BUFF_CHAIN) ? (EMAC_RXMBP_NOCHAIN_MASK) : 0x0) |
|
|
((EMAC_DEF_MACCTRL_FRAME_EN) ? (EMAC_RXMBP_CMFEN_MASK) : 0x0) |
|
|
((EMAC_DEF_SHORT_FRAME_EN) ? (EMAC_RXMBP_CSFEN_MASK) : 0x0) |
|
|
((EMAC_DEF_ERROR_FRAME_EN) ? (EMAC_RXMBP_CEFEN_MASK) : 0x0) |
|
|
((EMAC_DEF_PROM_EN) ? (EMAC_RXMBP_CAFEN_MASK) : 0x0) |
|
|
((EMAC_DEF_PROM_CH & EMAC_RXMBP_CHMASK) << \
|
|
EMAC_RXMBP_PROMCH_SHIFT) |
|
|
((EMAC_DEF_BCAST_EN) ? (EMAC_RXMBP_BROADEN_MASK) : 0x0) |
|
|
((EMAC_DEF_BCAST_CH & EMAC_RXMBP_CHMASK) << \
|
|
EMAC_RXMBP_BROADCH_SHIFT) |
|
|
((EMAC_DEF_MCAST_EN) ? (EMAC_RXMBP_MULTIEN_MASK) : 0x0) |
|
|
((EMAC_DEF_MCAST_CH & EMAC_RXMBP_CHMASK) << \
|
|
EMAC_RXMBP_MULTICH_SHIFT));
|
|
emac_write(EMAC_RXMBPENABLE, mbp_enable);
|
|
emac_write(EMAC_RXMAXLEN, (EMAC_DEF_MAX_FRAME_SIZE &
|
|
EMAC_RX_MAX_LEN_MASK));
|
|
emac_write(EMAC_RXBUFFEROFFSET, (EMAC_DEF_BUFFER_OFFSET &
|
|
EMAC_RX_BUFFER_OFFSET_MASK));
|
|
emac_write(EMAC_RXFILTERLOWTHRESH, 0);
|
|
emac_write(EMAC_RXUNICASTCLEAR, EMAC_RX_UNICAST_CLEAR_ALL);
|
|
priv->rx_addr_type = (emac_read(EMAC_MACCONFIG) >> 8) & 0xFF;
|
|
|
|
emac_write(EMAC_MACINTMASKSET, EMAC_MAC_HOST_ERR_INTMASK_VAL);
|
|
|
|
emac_setmac(priv, EMAC_DEF_RX_CH, priv->mac_addr);
|
|
|
|
/* Enable MII */
|
|
val = emac_read(EMAC_MACCONTROL);
|
|
val |= (EMAC_MACCONTROL_GMIIEN);
|
|
emac_write(EMAC_MACCONTROL, val);
|
|
|
|
/* Enable NAPI and interrupts */
|
|
napi_enable(&priv->napi);
|
|
emac_int_enable(priv);
|
|
return 0;
|
|
|
|
}
|
|
|
|
/**
|
|
* emac_poll: EMAC NAPI Poll function
|
|
* @ndev: The DaVinci EMAC network adapter
|
|
* @budget: Number of receive packets to process (as told by NAPI layer)
|
|
*
|
|
* NAPI Poll function implemented to process packets as per budget. We check
|
|
* the type of interrupt on the device and accordingly call the TX or RX
|
|
* packet processing functions. We follow the budget for RX processing and
|
|
* also put a cap on number of TX pkts processed through config param. The
|
|
* NAPI schedule function is called if more packets pending.
|
|
*
|
|
* Returns number of packets received (in most cases; else TX pkts - rarely)
|
|
*/
|
|
static int emac_poll(struct napi_struct *napi, int budget)
|
|
{
|
|
unsigned int mask;
|
|
struct emac_priv *priv = container_of(napi, struct emac_priv, napi);
|
|
struct net_device *ndev = priv->ndev;
|
|
struct device *emac_dev = &ndev->dev;
|
|
u32 status = 0;
|
|
u32 num_tx_pkts = 0, num_rx_pkts = 0;
|
|
|
|
/* Check interrupt vectors and call packet processing */
|
|
status = emac_read(EMAC_MACINVECTOR);
|
|
|
|
mask = EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC;
|
|
|
|
if (priv->version == EMAC_VERSION_2)
|
|
mask = EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC;
|
|
|
|
if (status & mask) {
|
|
num_tx_pkts = cpdma_chan_process(priv->txchan,
|
|
EMAC_DEF_TX_MAX_SERVICE);
|
|
} /* TX processing */
|
|
|
|
mask = EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC;
|
|
|
|
if (priv->version == EMAC_VERSION_2)
|
|
mask = EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC;
|
|
|
|
if (status & mask) {
|
|
num_rx_pkts = cpdma_chan_process(priv->rxchan, budget);
|
|
} /* RX processing */
|
|
|
|
mask = EMAC_DM644X_MAC_IN_VECTOR_HOST_INT;
|
|
if (priv->version == EMAC_VERSION_2)
|
|
mask = EMAC_DM646X_MAC_IN_VECTOR_HOST_INT;
|
|
|
|
if (unlikely(status & mask)) {
|
|
u32 ch, cause;
|
|
dev_err(emac_dev, "DaVinci EMAC: Fatal Hardware Error\n");
|
|
netif_stop_queue(ndev);
|
|
napi_disable(&priv->napi);
|
|
|
|
status = emac_read(EMAC_MACSTATUS);
|
|
cause = ((status & EMAC_MACSTATUS_TXERRCODE_MASK) >>
|
|
EMAC_MACSTATUS_TXERRCODE_SHIFT);
|
|
if (cause) {
|
|
ch = ((status & EMAC_MACSTATUS_TXERRCH_MASK) >>
|
|
EMAC_MACSTATUS_TXERRCH_SHIFT);
|
|
if (net_ratelimit()) {
|
|
dev_err(emac_dev, "TX Host error %s on ch=%d\n",
|
|
&emac_txhost_errcodes[cause][0], ch);
|
|
}
|
|
}
|
|
cause = ((status & EMAC_MACSTATUS_RXERRCODE_MASK) >>
|
|
EMAC_MACSTATUS_RXERRCODE_SHIFT);
|
|
if (cause) {
|
|
ch = ((status & EMAC_MACSTATUS_RXERRCH_MASK) >>
|
|
EMAC_MACSTATUS_RXERRCH_SHIFT);
|
|
if (netif_msg_hw(priv) && net_ratelimit())
|
|
dev_err(emac_dev, "RX Host error %s on ch=%d\n",
|
|
&emac_rxhost_errcodes[cause][0], ch);
|
|
}
|
|
} else if (num_rx_pkts < budget) {
|
|
napi_complete(napi);
|
|
emac_int_enable(priv);
|
|
}
|
|
|
|
return num_rx_pkts;
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
/**
|
|
* emac_poll_controller: EMAC Poll controller function
|
|
* @ndev: The DaVinci EMAC network adapter
|
|
*
|
|
* Polled functionality used by netconsole and others in non interrupt mode
|
|
*
|
|
*/
|
|
void emac_poll_controller(struct net_device *ndev)
|
|
{
|
|
struct emac_priv *priv = netdev_priv(ndev);
|
|
|
|
emac_int_disable(priv);
|
|
emac_irq(ndev->irq, ndev);
|
|
emac_int_enable(priv);
|
|
}
|
|
#endif
|
|
|
|
static void emac_adjust_link(struct net_device *ndev)
|
|
{
|
|
struct emac_priv *priv = netdev_priv(ndev);
|
|
struct phy_device *phydev = priv->phydev;
|
|
unsigned long flags;
|
|
int new_state = 0;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
if (phydev->link) {
|
|
/* check the mode of operation - full/half duplex */
|
|
if (phydev->duplex != priv->duplex) {
|
|
new_state = 1;
|
|
priv->duplex = phydev->duplex;
|
|
}
|
|
if (phydev->speed != priv->speed) {
|
|
new_state = 1;
|
|
priv->speed = phydev->speed;
|
|
}
|
|
if (!priv->link) {
|
|
new_state = 1;
|
|
priv->link = 1;
|
|
}
|
|
|
|
} else if (priv->link) {
|
|
new_state = 1;
|
|
priv->link = 0;
|
|
priv->speed = 0;
|
|
priv->duplex = ~0;
|
|
}
|
|
if (new_state) {
|
|
emac_update_phystatus(priv);
|
|
phy_print_status(priv->phydev);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
|
|
/*************************************************************************
|
|
* Linux Driver Model
|
|
*************************************************************************/
|
|
|
|
/**
|
|
* emac_devioctl: EMAC adapter ioctl
|
|
* @ndev: The DaVinci EMAC network adapter
|
|
* @ifrq: request parameter
|
|
* @cmd: command parameter
|
|
*
|
|
* EMAC driver ioctl function
|
|
*
|
|
* Returns success(0) or appropriate error code
|
|
*/
|
|
static int emac_devioctl(struct net_device *ndev, struct ifreq *ifrq, int cmd)
|
|
{
|
|
dev_warn(&ndev->dev, "DaVinci EMAC: ioctl not supported\n");
|
|
|
|
if (!(netif_running(ndev)))
|
|
return -EINVAL;
|
|
|
|
/* TODO: Add phy read and write and private statistics get feature */
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static int match_first_device(struct device *dev, void *data)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* emac_dev_open: EMAC device open
|
|
* @ndev: The DaVinci EMAC network adapter
|
|
*
|
|
* Called when system wants to start the interface. We init TX/RX channels
|
|
* and enable the hardware for packet reception/transmission and start the
|
|
* network queue.
|
|
*
|
|
* Returns 0 for a successful open, or appropriate error code
|
|
*/
|
|
static int emac_dev_open(struct net_device *ndev)
|
|
{
|
|
struct device *emac_dev = &ndev->dev;
|
|
u32 cnt;
|
|
struct resource *res;
|
|
int q, m, ret;
|
|
int i = 0;
|
|
int k = 0;
|
|
struct emac_priv *priv = netdev_priv(ndev);
|
|
|
|
netif_carrier_off(ndev);
|
|
for (cnt = 0; cnt < ETH_ALEN; cnt++)
|
|
ndev->dev_addr[cnt] = priv->mac_addr[cnt];
|
|
|
|
/* Configuration items */
|
|
priv->rx_buf_size = EMAC_DEF_MAX_FRAME_SIZE + NET_IP_ALIGN;
|
|
|
|
priv->mac_hash1 = 0;
|
|
priv->mac_hash2 = 0;
|
|
emac_write(EMAC_MACHASH1, 0);
|
|
emac_write(EMAC_MACHASH2, 0);
|
|
|
|
for (i = 0; i < EMAC_DEF_RX_NUM_DESC; i++) {
|
|
struct sk_buff *skb = emac_rx_alloc(priv);
|
|
|
|
if (!skb)
|
|
break;
|
|
|
|
ret = cpdma_chan_submit(priv->rxchan, skb, skb->data,
|
|
skb_tailroom(skb), GFP_KERNEL);
|
|
if (WARN_ON(ret < 0))
|
|
break;
|
|
}
|
|
|
|
/* Request IRQ */
|
|
|
|
while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k))) {
|
|
for (i = res->start; i <= res->end; i++) {
|
|
if (request_irq(i, emac_irq, IRQF_DISABLED,
|
|
ndev->name, ndev))
|
|
goto rollback;
|
|
}
|
|
k++;
|
|
}
|
|
|
|
/* Start/Enable EMAC hardware */
|
|
emac_hw_enable(priv);
|
|
|
|
/* Enable Interrupt pacing if configured */
|
|
if (priv->coal_intvl != 0) {
|
|
struct ethtool_coalesce coal;
|
|
|
|
coal.rx_coalesce_usecs = (priv->coal_intvl << 4);
|
|
emac_set_coalesce(ndev, &coal);
|
|
}
|
|
|
|
cpdma_ctlr_start(priv->dma);
|
|
|
|
priv->phydev = NULL;
|
|
/* use the first phy on the bus if pdata did not give us a phy id */
|
|
if (!priv->phy_id) {
|
|
struct device *phy;
|
|
|
|
phy = bus_find_device(&mdio_bus_type, NULL, NULL,
|
|
match_first_device);
|
|
if (phy)
|
|
priv->phy_id = dev_name(phy);
|
|
}
|
|
|
|
if (priv->phy_id && *priv->phy_id) {
|
|
priv->phydev = phy_connect(ndev, priv->phy_id,
|
|
&emac_adjust_link, 0,
|
|
PHY_INTERFACE_MODE_MII);
|
|
|
|
if (IS_ERR(priv->phydev)) {
|
|
dev_err(emac_dev, "could not connect to phy %s\n",
|
|
priv->phy_id);
|
|
priv->phydev = NULL;
|
|
return PTR_ERR(priv->phydev);
|
|
}
|
|
|
|
priv->link = 0;
|
|
priv->speed = 0;
|
|
priv->duplex = ~0;
|
|
|
|
dev_info(emac_dev, "attached PHY driver [%s] "
|
|
"(mii_bus:phy_addr=%s, id=%x)\n",
|
|
priv->phydev->drv->name, dev_name(&priv->phydev->dev),
|
|
priv->phydev->phy_id);
|
|
} else {
|
|
/* No PHY , fix the link, speed and duplex settings */
|
|
dev_notice(emac_dev, "no phy, defaulting to 100/full\n");
|
|
priv->link = 1;
|
|
priv->speed = SPEED_100;
|
|
priv->duplex = DUPLEX_FULL;
|
|
emac_update_phystatus(priv);
|
|
}
|
|
|
|
if (!netif_running(ndev)) /* debug only - to avoid compiler warning */
|
|
emac_dump_regs(priv);
|
|
|
|
if (netif_msg_drv(priv))
|
|
dev_notice(emac_dev, "DaVinci EMAC: Opened %s\n", ndev->name);
|
|
|
|
if (priv->phydev)
|
|
phy_start(priv->phydev);
|
|
|
|
return 0;
|
|
|
|
rollback:
|
|
|
|
dev_err(emac_dev, "DaVinci EMAC: request_irq() failed");
|
|
|
|
for (q = k; k >= 0; k--) {
|
|
for (m = i; m >= res->start; m--)
|
|
free_irq(m, ndev);
|
|
res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k-1);
|
|
m = res->end;
|
|
}
|
|
return -EBUSY;
|
|
}
|
|
|
|
/**
|
|
* emac_dev_stop: EMAC device stop
|
|
* @ndev: The DaVinci EMAC network adapter
|
|
*
|
|
* Called when system wants to stop or down the interface. We stop the network
|
|
* queue, disable interrupts and cleanup TX/RX channels.
|
|
*
|
|
* We return the statistics in net_device_stats structure pulled from emac
|
|
*/
|
|
static int emac_dev_stop(struct net_device *ndev)
|
|
{
|
|
struct resource *res;
|
|
int i = 0;
|
|
int irq_num;
|
|
struct emac_priv *priv = netdev_priv(ndev);
|
|
struct device *emac_dev = &ndev->dev;
|
|
|
|
/* inform the upper layers. */
|
|
netif_stop_queue(ndev);
|
|
napi_disable(&priv->napi);
|
|
|
|
netif_carrier_off(ndev);
|
|
emac_int_disable(priv);
|
|
cpdma_ctlr_stop(priv->dma);
|
|
emac_write(EMAC_SOFTRESET, 1);
|
|
|
|
if (priv->phydev)
|
|
phy_disconnect(priv->phydev);
|
|
|
|
/* Free IRQ */
|
|
while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, i))) {
|
|
for (irq_num = res->start; irq_num <= res->end; irq_num++)
|
|
free_irq(irq_num, priv->ndev);
|
|
i++;
|
|
}
|
|
|
|
if (netif_msg_drv(priv))
|
|
dev_notice(emac_dev, "DaVinci EMAC: %s stopped\n", ndev->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* emac_dev_getnetstats: EMAC get statistics function
|
|
* @ndev: The DaVinci EMAC network adapter
|
|
*
|
|
* Called when system wants to get statistics from the device.
|
|
*
|
|
* We return the statistics in net_device_stats structure pulled from emac
|
|
*/
|
|
static struct net_device_stats *emac_dev_getnetstats(struct net_device *ndev)
|
|
{
|
|
struct emac_priv *priv = netdev_priv(ndev);
|
|
u32 mac_control;
|
|
u32 stats_clear_mask;
|
|
|
|
/* update emac hardware stats and reset the registers*/
|
|
|
|
mac_control = emac_read(EMAC_MACCONTROL);
|
|
|
|
if (mac_control & EMAC_MACCONTROL_GMIIEN)
|
|
stats_clear_mask = EMAC_STATS_CLR_MASK;
|
|
else
|
|
stats_clear_mask = 0;
|
|
|
|
ndev->stats.multicast += emac_read(EMAC_RXMCASTFRAMES);
|
|
emac_write(EMAC_RXMCASTFRAMES, stats_clear_mask);
|
|
|
|
ndev->stats.collisions += (emac_read(EMAC_TXCOLLISION) +
|
|
emac_read(EMAC_TXSINGLECOLL) +
|
|
emac_read(EMAC_TXMULTICOLL));
|
|
emac_write(EMAC_TXCOLLISION, stats_clear_mask);
|
|
emac_write(EMAC_TXSINGLECOLL, stats_clear_mask);
|
|
emac_write(EMAC_TXMULTICOLL, stats_clear_mask);
|
|
|
|
ndev->stats.rx_length_errors += (emac_read(EMAC_RXOVERSIZED) +
|
|
emac_read(EMAC_RXJABBER) +
|
|
emac_read(EMAC_RXUNDERSIZED));
|
|
emac_write(EMAC_RXOVERSIZED, stats_clear_mask);
|
|
emac_write(EMAC_RXJABBER, stats_clear_mask);
|
|
emac_write(EMAC_RXUNDERSIZED, stats_clear_mask);
|
|
|
|
ndev->stats.rx_over_errors += (emac_read(EMAC_RXSOFOVERRUNS) +
|
|
emac_read(EMAC_RXMOFOVERRUNS));
|
|
emac_write(EMAC_RXSOFOVERRUNS, stats_clear_mask);
|
|
emac_write(EMAC_RXMOFOVERRUNS, stats_clear_mask);
|
|
|
|
ndev->stats.rx_fifo_errors += emac_read(EMAC_RXDMAOVERRUNS);
|
|
emac_write(EMAC_RXDMAOVERRUNS, stats_clear_mask);
|
|
|
|
ndev->stats.tx_carrier_errors +=
|
|
emac_read(EMAC_TXCARRIERSENSE);
|
|
emac_write(EMAC_TXCARRIERSENSE, stats_clear_mask);
|
|
|
|
ndev->stats.tx_fifo_errors = emac_read(EMAC_TXUNDERRUN);
|
|
emac_write(EMAC_TXUNDERRUN, stats_clear_mask);
|
|
|
|
return &ndev->stats;
|
|
}
|
|
|
|
static const struct net_device_ops emac_netdev_ops = {
|
|
.ndo_open = emac_dev_open,
|
|
.ndo_stop = emac_dev_stop,
|
|
.ndo_start_xmit = emac_dev_xmit,
|
|
.ndo_set_multicast_list = emac_dev_mcast_set,
|
|
.ndo_set_mac_address = emac_dev_setmac_addr,
|
|
.ndo_do_ioctl = emac_devioctl,
|
|
.ndo_tx_timeout = emac_dev_tx_timeout,
|
|
.ndo_get_stats = emac_dev_getnetstats,
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
.ndo_poll_controller = emac_poll_controller,
|
|
#endif
|
|
};
|
|
|
|
/**
|
|
* davinci_emac_probe: EMAC device probe
|
|
* @pdev: The DaVinci EMAC device that we are removing
|
|
*
|
|
* Called when probing for emac devicesr. We get details of instances and
|
|
* resource information from platform init and register a network device
|
|
* and allocate resources necessary for driver to perform
|
|
*/
|
|
static int __devinit davinci_emac_probe(struct platform_device *pdev)
|
|
{
|
|
int rc = 0;
|
|
struct resource *res;
|
|
struct net_device *ndev;
|
|
struct emac_priv *priv;
|
|
unsigned long size, hw_ram_addr;
|
|
struct emac_platform_data *pdata;
|
|
struct device *emac_dev;
|
|
struct cpdma_params dma_params;
|
|
|
|
/* obtain emac clock from kernel */
|
|
emac_clk = clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(emac_clk)) {
|
|
printk(KERN_ERR "DaVinci EMAC: Failed to get EMAC clock\n");
|
|
return -EBUSY;
|
|
}
|
|
emac_bus_frequency = clk_get_rate(emac_clk);
|
|
/* TODO: Probe PHY here if possible */
|
|
|
|
ndev = alloc_etherdev(sizeof(struct emac_priv));
|
|
if (!ndev) {
|
|
printk(KERN_ERR "DaVinci EMAC: Error allocating net_device\n");
|
|
clk_put(emac_clk);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, ndev);
|
|
priv = netdev_priv(ndev);
|
|
priv->pdev = pdev;
|
|
priv->ndev = ndev;
|
|
priv->msg_enable = netif_msg_init(debug_level, DAVINCI_EMAC_DEBUG);
|
|
|
|
spin_lock_init(&priv->lock);
|
|
|
|
pdata = pdev->dev.platform_data;
|
|
if (!pdata) {
|
|
printk(KERN_ERR "DaVinci EMAC: No platform data\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* MAC addr and PHY mask , RMII enable info from platform_data */
|
|
memcpy(priv->mac_addr, pdata->mac_addr, 6);
|
|
priv->phy_id = pdata->phy_id;
|
|
priv->rmii_en = pdata->rmii_en;
|
|
priv->version = pdata->version;
|
|
priv->int_enable = pdata->interrupt_enable;
|
|
priv->int_disable = pdata->interrupt_disable;
|
|
|
|
priv->coal_intvl = 0;
|
|
priv->bus_freq_mhz = (u32)(emac_bus_frequency / 1000000);
|
|
|
|
emac_dev = &ndev->dev;
|
|
/* Get EMAC platform data */
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
dev_err(emac_dev, "DaVinci EMAC: Error getting res\n");
|
|
rc = -ENOENT;
|
|
goto probe_quit;
|
|
}
|
|
|
|
priv->emac_base_phys = res->start + pdata->ctrl_reg_offset;
|
|
size = res->end - res->start + 1;
|
|
if (!request_mem_region(res->start, size, ndev->name)) {
|
|
dev_err(emac_dev, "DaVinci EMAC: failed request_mem_region() for regs\n");
|
|
rc = -ENXIO;
|
|
goto probe_quit;
|
|
}
|
|
|
|
priv->remap_addr = ioremap(res->start, size);
|
|
if (!priv->remap_addr) {
|
|
dev_err(emac_dev, "Unable to map IO\n");
|
|
rc = -ENOMEM;
|
|
release_mem_region(res->start, size);
|
|
goto probe_quit;
|
|
}
|
|
priv->emac_base = priv->remap_addr + pdata->ctrl_reg_offset;
|
|
ndev->base_addr = (unsigned long)priv->remap_addr;
|
|
|
|
priv->ctrl_base = priv->remap_addr + pdata->ctrl_mod_reg_offset;
|
|
|
|
hw_ram_addr = pdata->hw_ram_addr;
|
|
if (!hw_ram_addr)
|
|
hw_ram_addr = (u32 __force)res->start + pdata->ctrl_ram_offset;
|
|
|
|
memset(&dma_params, 0, sizeof(dma_params));
|
|
dma_params.dev = emac_dev;
|
|
dma_params.dmaregs = priv->emac_base;
|
|
dma_params.rxthresh = priv->emac_base + 0x120;
|
|
dma_params.rxfree = priv->emac_base + 0x140;
|
|
dma_params.txhdp = priv->emac_base + 0x600;
|
|
dma_params.rxhdp = priv->emac_base + 0x620;
|
|
dma_params.txcp = priv->emac_base + 0x640;
|
|
dma_params.rxcp = priv->emac_base + 0x660;
|
|
dma_params.num_chan = EMAC_MAX_TXRX_CHANNELS;
|
|
dma_params.min_packet_size = EMAC_DEF_MIN_ETHPKTSIZE;
|
|
dma_params.desc_mem_phys = hw_ram_addr;
|
|
dma_params.desc_mem_size = pdata->ctrl_ram_size;
|
|
dma_params.desc_align = 16;
|
|
|
|
priv->dma = cpdma_ctlr_create(&dma_params);
|
|
if (!priv->dma) {
|
|
dev_err(emac_dev, "DaVinci EMAC: Error initializing DMA\n");
|
|
rc = -ENOMEM;
|
|
goto no_dma;
|
|
}
|
|
|
|
priv->txchan = cpdma_chan_create(priv->dma, tx_chan_num(EMAC_DEF_TX_CH),
|
|
emac_tx_handler);
|
|
priv->rxchan = cpdma_chan_create(priv->dma, rx_chan_num(EMAC_DEF_RX_CH),
|
|
emac_rx_handler);
|
|
if (WARN_ON(!priv->txchan || !priv->rxchan)) {
|
|
rc = -ENOMEM;
|
|
goto no_irq_res;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
if (!res) {
|
|
dev_err(emac_dev, "DaVinci EMAC: Error getting irq res\n");
|
|
rc = -ENOENT;
|
|
goto no_irq_res;
|
|
}
|
|
ndev->irq = res->start;
|
|
|
|
if (!is_valid_ether_addr(priv->mac_addr)) {
|
|
/* Use random MAC if none passed */
|
|
random_ether_addr(priv->mac_addr);
|
|
printk(KERN_WARNING "%s: using random MAC addr: %pM\n",
|
|
__func__, priv->mac_addr);
|
|
}
|
|
|
|
ndev->netdev_ops = &emac_netdev_ops;
|
|
SET_ETHTOOL_OPS(ndev, ðtool_ops);
|
|
netif_napi_add(ndev, &priv->napi, emac_poll, EMAC_POLL_WEIGHT);
|
|
|
|
clk_enable(emac_clk);
|
|
|
|
/* register the network device */
|
|
SET_NETDEV_DEV(ndev, &pdev->dev);
|
|
rc = register_netdev(ndev);
|
|
if (rc) {
|
|
dev_err(emac_dev, "DaVinci EMAC: Error in register_netdev\n");
|
|
rc = -ENODEV;
|
|
goto netdev_reg_err;
|
|
}
|
|
|
|
|
|
if (netif_msg_probe(priv)) {
|
|
dev_notice(emac_dev, "DaVinci EMAC Probe found device "\
|
|
"(regs: %p, irq: %d)\n",
|
|
(void *)priv->emac_base_phys, ndev->irq);
|
|
}
|
|
return 0;
|
|
|
|
netdev_reg_err:
|
|
clk_disable(emac_clk);
|
|
no_irq_res:
|
|
if (priv->txchan)
|
|
cpdma_chan_destroy(priv->txchan);
|
|
if (priv->rxchan)
|
|
cpdma_chan_destroy(priv->rxchan);
|
|
cpdma_ctlr_destroy(priv->dma);
|
|
no_dma:
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
release_mem_region(res->start, res->end - res->start + 1);
|
|
iounmap(priv->remap_addr);
|
|
|
|
probe_quit:
|
|
clk_put(emac_clk);
|
|
free_netdev(ndev);
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* davinci_emac_remove: EMAC device remove
|
|
* @pdev: The DaVinci EMAC device that we are removing
|
|
*
|
|
* Called when removing the device driver. We disable clock usage and release
|
|
* the resources taken up by the driver and unregister network device
|
|
*/
|
|
static int __devexit davinci_emac_remove(struct platform_device *pdev)
|
|
{
|
|
struct resource *res;
|
|
struct net_device *ndev = platform_get_drvdata(pdev);
|
|
struct emac_priv *priv = netdev_priv(ndev);
|
|
|
|
dev_notice(&ndev->dev, "DaVinci EMAC: davinci_emac_remove()\n");
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
if (priv->txchan)
|
|
cpdma_chan_destroy(priv->txchan);
|
|
if (priv->rxchan)
|
|
cpdma_chan_destroy(priv->rxchan);
|
|
cpdma_ctlr_destroy(priv->dma);
|
|
|
|
release_mem_region(res->start, res->end - res->start + 1);
|
|
|
|
unregister_netdev(ndev);
|
|
iounmap(priv->remap_addr);
|
|
free_netdev(ndev);
|
|
|
|
clk_disable(emac_clk);
|
|
clk_put(emac_clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int davinci_emac_suspend(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct net_device *ndev = platform_get_drvdata(pdev);
|
|
|
|
if (netif_running(ndev))
|
|
emac_dev_stop(ndev);
|
|
|
|
clk_disable(emac_clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int davinci_emac_resume(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct net_device *ndev = platform_get_drvdata(pdev);
|
|
|
|
clk_enable(emac_clk);
|
|
|
|
if (netif_running(ndev))
|
|
emac_dev_open(ndev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops davinci_emac_pm_ops = {
|
|
.suspend = davinci_emac_suspend,
|
|
.resume = davinci_emac_resume,
|
|
};
|
|
|
|
/**
|
|
* davinci_emac_driver: EMAC platform driver structure
|
|
*/
|
|
static struct platform_driver davinci_emac_driver = {
|
|
.driver = {
|
|
.name = "davinci_emac",
|
|
.owner = THIS_MODULE,
|
|
.pm = &davinci_emac_pm_ops,
|
|
},
|
|
.probe = davinci_emac_probe,
|
|
.remove = __devexit_p(davinci_emac_remove),
|
|
};
|
|
|
|
/**
|
|
* davinci_emac_init: EMAC driver module init
|
|
*
|
|
* Called when initializing the driver. We register the driver with
|
|
* the platform.
|
|
*/
|
|
static int __init davinci_emac_init(void)
|
|
{
|
|
return platform_driver_register(&davinci_emac_driver);
|
|
}
|
|
late_initcall(davinci_emac_init);
|
|
|
|
/**
|
|
* davinci_emac_exit: EMAC driver module exit
|
|
*
|
|
* Called when exiting the driver completely. We unregister the driver with
|
|
* the platform and exit
|
|
*/
|
|
static void __exit davinci_emac_exit(void)
|
|
{
|
|
platform_driver_unregister(&davinci_emac_driver);
|
|
}
|
|
module_exit(davinci_emac_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("DaVinci EMAC Maintainer: Anant Gole <anantgole@ti.com>");
|
|
MODULE_AUTHOR("DaVinci EMAC Maintainer: Chaithrika U S <chaithrika@ti.com>");
|
|
MODULE_DESCRIPTION("DaVinci EMAC Ethernet driver");
|