![Linus Torvalds](/assets/img/avatar_default.png)
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
616 lines
18 KiB
C
616 lines
18 KiB
C
/* smc-ultra.c: A SMC Ultra ethernet driver for linux. */
|
||
/*
|
||
This is a driver for the SMC Ultra and SMC EtherEZ ISA ethercards.
|
||
|
||
Written 1993-1998 by Donald Becker.
|
||
|
||
Copyright 1993 United States Government as represented by the
|
||
Director, National Security Agency.
|
||
|
||
This software may be used and distributed according to the terms
|
||
of the GNU General Public License, incorporated herein by reference.
|
||
|
||
The author may be reached as becker@scyld.com, or C/O
|
||
Scyld Computing Corporation
|
||
410 Severn Ave., Suite 210
|
||
Annapolis MD 21403
|
||
|
||
This driver uses the cards in the 8390-compatible mode.
|
||
Most of the run-time complexity is handled by the generic code in
|
||
8390.c. The code in this file is responsible for
|
||
|
||
ultra_probe() Detecting and initializing the card.
|
||
ultra_probe1()
|
||
ultra_probe_isapnp()
|
||
|
||
ultra_open() The card-specific details of starting, stopping
|
||
ultra_reset_8390() and resetting the 8390 NIC core.
|
||
ultra_close()
|
||
|
||
ultra_block_input() Routines for reading and writing blocks of
|
||
ultra_block_output() packet buffer memory.
|
||
ultra_pio_input()
|
||
ultra_pio_output()
|
||
|
||
This driver enables the shared memory only when doing the actual data
|
||
transfers to avoid a bug in early version of the card that corrupted
|
||
data transferred by a AHA1542.
|
||
|
||
This driver now supports the programmed-I/O (PIO) data transfer mode of
|
||
the EtherEZ. It does not use the non-8390-compatible "Altego" mode.
|
||
That support (if available) is in smc-ez.c.
|
||
|
||
Changelog:
|
||
|
||
Paul Gortmaker : multiple card support for module users.
|
||
Donald Becker : 4/17/96 PIO support, minor potential problems avoided.
|
||
Donald Becker : 6/6/96 correctly set auto-wrap bit.
|
||
Alexander Sotirov : 1/20/01 Added support for ISAPnP cards
|
||
|
||
Note about the ISA PnP support:
|
||
|
||
This driver can not autoprobe for more than one SMC EtherEZ PnP card.
|
||
You have to configure the second card manually through the /proc/isapnp
|
||
interface and then load the module with an explicit io=0x___ option.
|
||
*/
|
||
|
||
static const char version[] =
|
||
"smc-ultra.c:v2.02 2/3/98 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
|
||
|
||
#include <linux/config.h>
|
||
#include <linux/module.h>
|
||
#include <linux/kernel.h>
|
||
#include <linux/errno.h>
|
||
#include <linux/string.h>
|
||
#include <linux/init.h>
|
||
#include <linux/isapnp.h>
|
||
#include <linux/netdevice.h>
|
||
#include <linux/etherdevice.h>
|
||
|
||
#include <asm/io.h>
|
||
#include <asm/system.h>
|
||
|
||
#include "8390.h"
|
||
|
||
#define DRV_NAME "smc-ultra"
|
||
|
||
/* A zero-terminated list of I/O addresses to be probed. */
|
||
static unsigned int ultra_portlist[] __initdata =
|
||
{0x200, 0x220, 0x240, 0x280, 0x300, 0x340, 0x380, 0};
|
||
|
||
static int ultra_probe1(struct net_device *dev, int ioaddr);
|
||
|
||
#ifdef __ISAPNP__
|
||
static int ultra_probe_isapnp(struct net_device *dev);
|
||
#endif
|
||
|
||
static int ultra_open(struct net_device *dev);
|
||
static void ultra_reset_8390(struct net_device *dev);
|
||
static void ultra_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
|
||
int ring_page);
|
||
static void ultra_block_input(struct net_device *dev, int count,
|
||
struct sk_buff *skb, int ring_offset);
|
||
static void ultra_block_output(struct net_device *dev, int count,
|
||
const unsigned char *buf, const int start_page);
|
||
static void ultra_pio_get_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
|
||
int ring_page);
|
||
static void ultra_pio_input(struct net_device *dev, int count,
|
||
struct sk_buff *skb, int ring_offset);
|
||
static void ultra_pio_output(struct net_device *dev, int count,
|
||
const unsigned char *buf, const int start_page);
|
||
static int ultra_close_card(struct net_device *dev);
|
||
|
||
#ifdef __ISAPNP__
|
||
static struct isapnp_device_id ultra_device_ids[] __initdata = {
|
||
{ ISAPNP_VENDOR('S','M','C'), ISAPNP_FUNCTION(0x8416),
|
||
ISAPNP_VENDOR('S','M','C'), ISAPNP_FUNCTION(0x8416),
|
||
(long) "SMC EtherEZ (8416)" },
|
||
{ } /* terminate list */
|
||
};
|
||
|
||
MODULE_DEVICE_TABLE(isapnp, ultra_device_ids);
|
||
#endif
|
||
|
||
|
||
#define START_PG 0x00 /* First page of TX buffer */
|
||
|
||
#define ULTRA_CMDREG 0 /* Offset to ASIC command register. */
|
||
#define ULTRA_RESET 0x80 /* Board reset, in ULTRA_CMDREG. */
|
||
#define ULTRA_MEMENB 0x40 /* Enable the shared memory. */
|
||
#define IOPD 0x02 /* I/O Pipe Data (16 bits), PIO operation. */
|
||
#define IOPA 0x07 /* I/O Pipe Address for PIO operation. */
|
||
#define ULTRA_NIC_OFFSET 16 /* NIC register offset from the base_addr. */
|
||
#define ULTRA_IO_EXTENT 32
|
||
#define EN0_ERWCNT 0x08 /* Early receive warning count. */
|
||
|
||
#ifdef CONFIG_NET_POLL_CONTROLLER
|
||
static void ultra_poll(struct net_device *dev)
|
||
{
|
||
disable_irq(dev->irq);
|
||
ei_interrupt(dev->irq, dev, NULL);
|
||
enable_irq(dev->irq);
|
||
}
|
||
#endif
|
||
/* Probe for the Ultra. This looks like a 8013 with the station
|
||
address PROM at I/O ports <base>+8 to <base>+13, with a checksum
|
||
following.
|
||
*/
|
||
|
||
static int __init do_ultra_probe(struct net_device *dev)
|
||
{
|
||
int i;
|
||
int base_addr = dev->base_addr;
|
||
int irq = dev->irq;
|
||
|
||
SET_MODULE_OWNER(dev);
|
||
|
||
#ifdef CONFIG_NET_POLL_CONTROLLER
|
||
dev->poll_controller = &ultra_poll;
|
||
#endif
|
||
if (base_addr > 0x1ff) /* Check a single specified location. */
|
||
return ultra_probe1(dev, base_addr);
|
||
else if (base_addr != 0) /* Don't probe at all. */
|
||
return -ENXIO;
|
||
|
||
#ifdef __ISAPNP__
|
||
/* Look for any installed ISAPnP cards */
|
||
if (isapnp_present() && (ultra_probe_isapnp(dev) == 0))
|
||
return 0;
|
||
#endif
|
||
|
||
for (i = 0; ultra_portlist[i]; i++) {
|
||
dev->irq = irq;
|
||
if (ultra_probe1(dev, ultra_portlist[i]) == 0)
|
||
return 0;
|
||
}
|
||
|
||
return -ENODEV;
|
||
}
|
||
|
||
static void cleanup_card(struct net_device *dev)
|
||
{
|
||
/* NB: ultra_close_card() does free_irq */
|
||
#ifdef __ISAPNP__
|
||
struct pnp_dev *idev = (struct pnp_dev *)ei_status.priv;
|
||
if (idev)
|
||
pnp_device_detach(idev);
|
||
#endif
|
||
release_region(dev->base_addr - ULTRA_NIC_OFFSET, ULTRA_IO_EXTENT);
|
||
iounmap(ei_status.mem);
|
||
}
|
||
|
||
#ifndef MODULE
|
||
struct net_device * __init ultra_probe(int unit)
|
||
{
|
||
struct net_device *dev = alloc_ei_netdev();
|
||
int err;
|
||
|
||
if (!dev)
|
||
return ERR_PTR(-ENOMEM);
|
||
|
||
sprintf(dev->name, "eth%d", unit);
|
||
netdev_boot_setup_check(dev);
|
||
|
||
err = do_ultra_probe(dev);
|
||
if (err)
|
||
goto out;
|
||
err = register_netdev(dev);
|
||
if (err)
|
||
goto out1;
|
||
return dev;
|
||
out1:
|
||
cleanup_card(dev);
|
||
out:
|
||
free_netdev(dev);
|
||
return ERR_PTR(err);
|
||
}
|
||
#endif
|
||
|
||
static int __init ultra_probe1(struct net_device *dev, int ioaddr)
|
||
{
|
||
int i, retval;
|
||
int checksum = 0;
|
||
const char *model_name;
|
||
unsigned char eeprom_irq = 0;
|
||
static unsigned version_printed;
|
||
/* Values from various config regs. */
|
||
unsigned char num_pages, irqreg, addr, piomode;
|
||
unsigned char idreg = inb(ioaddr + 7);
|
||
unsigned char reg4 = inb(ioaddr + 4) & 0x7f;
|
||
|
||
if (!request_region(ioaddr, ULTRA_IO_EXTENT, DRV_NAME))
|
||
return -EBUSY;
|
||
|
||
/* Check the ID nibble. */
|
||
if ((idreg & 0xF0) != 0x20 /* SMC Ultra */
|
||
&& (idreg & 0xF0) != 0x40) { /* SMC EtherEZ */
|
||
retval = -ENODEV;
|
||
goto out;
|
||
}
|
||
|
||
/* Select the station address register set. */
|
||
outb(reg4, ioaddr + 4);
|
||
|
||
for (i = 0; i < 8; i++)
|
||
checksum += inb(ioaddr + 8 + i);
|
||
if ((checksum & 0xff) != 0xFF) {
|
||
retval = -ENODEV;
|
||
goto out;
|
||
}
|
||
|
||
if (ei_debug && version_printed++ == 0)
|
||
printk(version);
|
||
|
||
model_name = (idreg & 0xF0) == 0x20 ? "SMC Ultra" : "SMC EtherEZ";
|
||
|
||
printk("%s: %s at %#3x,", dev->name, model_name, ioaddr);
|
||
|
||
for (i = 0; i < 6; i++)
|
||
printk(" %2.2X", dev->dev_addr[i] = inb(ioaddr + 8 + i));
|
||
|
||
/* Switch from the station address to the alternate register set and
|
||
read the useful registers there. */
|
||
outb(0x80 | reg4, ioaddr + 4);
|
||
|
||
/* Enabled FINE16 mode to avoid BIOS ROM width mismatches @ reboot. */
|
||
outb(0x80 | inb(ioaddr + 0x0c), ioaddr + 0x0c);
|
||
piomode = inb(ioaddr + 0x8);
|
||
addr = inb(ioaddr + 0xb);
|
||
irqreg = inb(ioaddr + 0xd);
|
||
|
||
/* Switch back to the station address register set so that the MS-DOS driver
|
||
can find the card after a warm boot. */
|
||
outb(reg4, ioaddr + 4);
|
||
|
||
if (dev->irq < 2) {
|
||
unsigned char irqmap[] = {0, 9, 3, 5, 7, 10, 11, 15};
|
||
int irq;
|
||
|
||
/* The IRQ bits are split. */
|
||
irq = irqmap[((irqreg & 0x40) >> 4) + ((irqreg & 0x0c) >> 2)];
|
||
|
||
if (irq == 0) {
|
||
printk(", failed to detect IRQ line.\n");
|
||
retval = -EAGAIN;
|
||
goto out;
|
||
}
|
||
dev->irq = irq;
|
||
eeprom_irq = 1;
|
||
}
|
||
|
||
/* The 8390 isn't at the base address, so fake the offset */
|
||
dev->base_addr = ioaddr+ULTRA_NIC_OFFSET;
|
||
|
||
{
|
||
int addr_tbl[4] = {0x0C0000, 0x0E0000, 0xFC0000, 0xFE0000};
|
||
short num_pages_tbl[4] = {0x20, 0x40, 0x80, 0xff};
|
||
|
||
dev->mem_start = ((addr & 0x0f) << 13) + addr_tbl[(addr >> 6) & 3] ;
|
||
num_pages = num_pages_tbl[(addr >> 4) & 3];
|
||
}
|
||
|
||
ei_status.name = model_name;
|
||
ei_status.word16 = 1;
|
||
ei_status.tx_start_page = START_PG;
|
||
ei_status.rx_start_page = START_PG + TX_PAGES;
|
||
ei_status.stop_page = num_pages;
|
||
|
||
ei_status.mem = ioremap(dev->mem_start, (ei_status.stop_page - START_PG)*256);
|
||
if (!ei_status.mem) {
|
||
printk(", failed to ioremap.\n");
|
||
retval = -ENOMEM;
|
||
goto out;
|
||
}
|
||
|
||
dev->mem_end = dev->mem_start + (ei_status.stop_page - START_PG)*256;
|
||
|
||
if (piomode) {
|
||
printk(",%s IRQ %d programmed-I/O mode.\n",
|
||
eeprom_irq ? "EEPROM" : "assigned ", dev->irq);
|
||
ei_status.block_input = &ultra_pio_input;
|
||
ei_status.block_output = &ultra_pio_output;
|
||
ei_status.get_8390_hdr = &ultra_pio_get_hdr;
|
||
} else {
|
||
printk(",%s IRQ %d memory %#lx-%#lx.\n", eeprom_irq ? "" : "assigned ",
|
||
dev->irq, dev->mem_start, dev->mem_end-1);
|
||
ei_status.block_input = &ultra_block_input;
|
||
ei_status.block_output = &ultra_block_output;
|
||
ei_status.get_8390_hdr = &ultra_get_8390_hdr;
|
||
}
|
||
ei_status.reset_8390 = &ultra_reset_8390;
|
||
dev->open = &ultra_open;
|
||
dev->stop = &ultra_close_card;
|
||
#ifdef CONFIG_NET_POLL_CONTROLLER
|
||
dev->poll_controller = ei_poll;
|
||
#endif
|
||
NS8390_init(dev, 0);
|
||
|
||
return 0;
|
||
out:
|
||
release_region(ioaddr, ULTRA_IO_EXTENT);
|
||
return retval;
|
||
}
|
||
|
||
#ifdef __ISAPNP__
|
||
static int __init ultra_probe_isapnp(struct net_device *dev)
|
||
{
|
||
int i;
|
||
|
||
for (i = 0; ultra_device_ids[i].vendor != 0; i++) {
|
||
struct pnp_dev *idev = NULL;
|
||
|
||
while ((idev = pnp_find_dev(NULL,
|
||
ultra_device_ids[i].vendor,
|
||
ultra_device_ids[i].function,
|
||
idev))) {
|
||
/* Avoid already found cards from previous calls */
|
||
if (pnp_device_attach(idev) < 0)
|
||
continue;
|
||
if (pnp_activate_dev(idev) < 0) {
|
||
__again:
|
||
pnp_device_detach(idev);
|
||
continue;
|
||
}
|
||
/* if no io and irq, search for next */
|
||
if (!pnp_port_valid(idev, 0) || !pnp_irq_valid(idev, 0))
|
||
goto __again;
|
||
/* found it */
|
||
dev->base_addr = pnp_port_start(idev, 0);
|
||
dev->irq = pnp_irq(idev, 0);
|
||
printk(KERN_INFO "smc-ultra.c: ISAPnP reports %s at i/o %#lx, irq %d.\n",
|
||
(char *) ultra_device_ids[i].driver_data,
|
||
dev->base_addr, dev->irq);
|
||
if (ultra_probe1(dev, dev->base_addr) != 0) { /* Shouldn't happen. */
|
||
printk(KERN_ERR "smc-ultra.c: Probe of ISAPnP card at %#lx failed.\n", dev->base_addr);
|
||
pnp_device_detach(idev);
|
||
return -ENXIO;
|
||
}
|
||
ei_status.priv = (unsigned long)idev;
|
||
break;
|
||
}
|
||
if (!idev)
|
||
continue;
|
||
return 0;
|
||
}
|
||
|
||
return -ENODEV;
|
||
}
|
||
#endif
|
||
|
||
static int
|
||
ultra_open(struct net_device *dev)
|
||
{
|
||
int retval;
|
||
int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */
|
||
unsigned char irq2reg[] = {0, 0, 0x04, 0x08, 0, 0x0C, 0, 0x40,
|
||
0, 0x04, 0x44, 0x48, 0, 0, 0, 0x4C, };
|
||
|
||
retval = request_irq(dev->irq, ei_interrupt, 0, dev->name, dev);
|
||
if (retval)
|
||
return retval;
|
||
|
||
outb(0x00, ioaddr); /* Disable shared memory for safety. */
|
||
outb(0x80, ioaddr + 5);
|
||
/* Set the IRQ line. */
|
||
outb(inb(ioaddr + 4) | 0x80, ioaddr + 4);
|
||
outb((inb(ioaddr + 13) & ~0x4C) | irq2reg[dev->irq], ioaddr + 13);
|
||
outb(inb(ioaddr + 4) & 0x7f, ioaddr + 4);
|
||
|
||
if (ei_status.block_input == &ultra_pio_input) {
|
||
outb(0x11, ioaddr + 6); /* Enable interrupts and PIO. */
|
||
outb(0x01, ioaddr + 0x19); /* Enable ring read auto-wrap. */
|
||
} else
|
||
outb(0x01, ioaddr + 6); /* Enable interrupts and memory. */
|
||
/* Set the early receive warning level in window 0 high enough not
|
||
to receive ERW interrupts. */
|
||
outb_p(E8390_NODMA+E8390_PAGE0, dev->base_addr);
|
||
outb(0xff, dev->base_addr + EN0_ERWCNT);
|
||
ei_open(dev);
|
||
return 0;
|
||
}
|
||
|
||
static void
|
||
ultra_reset_8390(struct net_device *dev)
|
||
{
|
||
int cmd_port = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC base addr */
|
||
|
||
outb(ULTRA_RESET, cmd_port);
|
||
if (ei_debug > 1) printk("resetting Ultra, t=%ld...", jiffies);
|
||
ei_status.txing = 0;
|
||
|
||
outb(0x00, cmd_port); /* Disable shared memory for safety. */
|
||
outb(0x80, cmd_port + 5);
|
||
if (ei_status.block_input == &ultra_pio_input)
|
||
outb(0x11, cmd_port + 6); /* Enable interrupts and PIO. */
|
||
else
|
||
outb(0x01, cmd_port + 6); /* Enable interrupts and memory. */
|
||
|
||
if (ei_debug > 1) printk("reset done\n");
|
||
return;
|
||
}
|
||
|
||
/* Grab the 8390 specific header. Similar to the block_input routine, but
|
||
we don't need to be concerned with ring wrap as the header will be at
|
||
the start of a page, so we optimize accordingly. */
|
||
|
||
static void
|
||
ultra_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
|
||
{
|
||
void __iomem *hdr_start = ei_status.mem + ((ring_page - START_PG)<<8);
|
||
|
||
outb(ULTRA_MEMENB, dev->base_addr - ULTRA_NIC_OFFSET); /* shmem on */
|
||
#ifdef __BIG_ENDIAN
|
||
/* Officially this is what we are doing, but the readl() is faster */
|
||
/* unfortunately it isn't endian aware of the struct */
|
||
memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr));
|
||
hdr->count = le16_to_cpu(hdr->count);
|
||
#else
|
||
((unsigned int*)hdr)[0] = readl(hdr_start);
|
||
#endif
|
||
outb(0x00, dev->base_addr - ULTRA_NIC_OFFSET); /* shmem off */
|
||
}
|
||
|
||
/* Block input and output are easy on shared memory ethercards, the only
|
||
complication is when the ring buffer wraps. */
|
||
|
||
static void
|
||
ultra_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
|
||
{
|
||
void __iomem *xfer_start = ei_status.mem + ring_offset - (START_PG<<8);
|
||
|
||
/* Enable shared memory. */
|
||
outb(ULTRA_MEMENB, dev->base_addr - ULTRA_NIC_OFFSET);
|
||
|
||
if (ring_offset + count > ei_status.stop_page*256) {
|
||
/* We must wrap the input move. */
|
||
int semi_count = ei_status.stop_page*256 - ring_offset;
|
||
memcpy_fromio(skb->data, xfer_start, semi_count);
|
||
count -= semi_count;
|
||
memcpy_fromio(skb->data + semi_count, ei_status.mem + TX_PAGES * 256, count);
|
||
} else {
|
||
/* Packet is in one chunk -- we can copy + cksum. */
|
||
eth_io_copy_and_sum(skb, xfer_start, count, 0);
|
||
}
|
||
|
||
outb(0x00, dev->base_addr - ULTRA_NIC_OFFSET); /* Disable memory. */
|
||
}
|
||
|
||
static void
|
||
ultra_block_output(struct net_device *dev, int count, const unsigned char *buf,
|
||
int start_page)
|
||
{
|
||
void __iomem *shmem = ei_status.mem + ((start_page - START_PG)<<8);
|
||
|
||
/* Enable shared memory. */
|
||
outb(ULTRA_MEMENB, dev->base_addr - ULTRA_NIC_OFFSET);
|
||
|
||
memcpy_toio(shmem, buf, count);
|
||
|
||
outb(0x00, dev->base_addr - ULTRA_NIC_OFFSET); /* Disable memory. */
|
||
}
|
||
|
||
/* The identical operations for programmed I/O cards.
|
||
The PIO model is trivial to use: the 16 bit start address is written
|
||
byte-sequentially to IOPA, with no intervening I/O operations, and the
|
||
data is read or written to the IOPD data port.
|
||
The only potential complication is that the address register is shared
|
||
and must be always be rewritten between each read/write direction change.
|
||
This is no problem for us, as the 8390 code ensures that we are single
|
||
threaded. */
|
||
static void ultra_pio_get_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
|
||
int ring_page)
|
||
{
|
||
int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */
|
||
outb(0x00, ioaddr + IOPA); /* Set the address, LSB first. */
|
||
outb(ring_page, ioaddr + IOPA);
|
||
insw(ioaddr + IOPD, hdr, sizeof(struct e8390_pkt_hdr)>>1);
|
||
}
|
||
|
||
static void ultra_pio_input(struct net_device *dev, int count,
|
||
struct sk_buff *skb, int ring_offset)
|
||
{
|
||
int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */
|
||
char *buf = skb->data;
|
||
|
||
/* For now set the address again, although it should already be correct. */
|
||
outb(ring_offset, ioaddr + IOPA); /* Set the address, LSB first. */
|
||
outb(ring_offset >> 8, ioaddr + IOPA);
|
||
/* We know skbuffs are padded to at least word alignment. */
|
||
insw(ioaddr + IOPD, buf, (count+1)>>1);
|
||
}
|
||
|
||
static void ultra_pio_output(struct net_device *dev, int count,
|
||
const unsigned char *buf, const int start_page)
|
||
{
|
||
int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */
|
||
outb(0x00, ioaddr + IOPA); /* Set the address, LSB first. */
|
||
outb(start_page, ioaddr + IOPA);
|
||
/* An extra odd byte is OK here as well. */
|
||
outsw(ioaddr + IOPD, buf, (count+1)>>1);
|
||
}
|
||
|
||
static int
|
||
ultra_close_card(struct net_device *dev)
|
||
{
|
||
int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* CMDREG */
|
||
|
||
netif_stop_queue(dev);
|
||
|
||
if (ei_debug > 1)
|
||
printk("%s: Shutting down ethercard.\n", dev->name);
|
||
|
||
outb(0x00, ioaddr + 6); /* Disable interrupts. */
|
||
free_irq(dev->irq, dev);
|
||
|
||
NS8390_init(dev, 0);
|
||
|
||
/* We should someday disable shared memory and change to 8-bit mode
|
||
"just in case"... */
|
||
|
||
return 0;
|
||
}
|
||
|
||
|
||
#ifdef MODULE
|
||
#define MAX_ULTRA_CARDS 4 /* Max number of Ultra cards per module */
|
||
static struct net_device *dev_ultra[MAX_ULTRA_CARDS];
|
||
static int io[MAX_ULTRA_CARDS];
|
||
static int irq[MAX_ULTRA_CARDS];
|
||
|
||
module_param_array(io, int, NULL, 0);
|
||
module_param_array(irq, int, NULL, 0);
|
||
MODULE_PARM_DESC(io, "I/O base address(es)");
|
||
MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
|
||
MODULE_DESCRIPTION("SMC Ultra/EtherEZ ISA/PnP Ethernet driver");
|
||
MODULE_LICENSE("GPL");
|
||
|
||
/* This is set up so that only a single autoprobe takes place per call.
|
||
ISA device autoprobes on a running machine are not recommended. */
|
||
int
|
||
init_module(void)
|
||
{
|
||
struct net_device *dev;
|
||
int this_dev, found = 0;
|
||
|
||
for (this_dev = 0; this_dev < MAX_ULTRA_CARDS; this_dev++) {
|
||
if (io[this_dev] == 0) {
|
||
if (this_dev != 0) break; /* only autoprobe 1st one */
|
||
printk(KERN_NOTICE "smc-ultra.c: Presently autoprobing (not recommended) for a single card.\n");
|
||
}
|
||
dev = alloc_ei_netdev();
|
||
if (!dev)
|
||
break;
|
||
dev->irq = irq[this_dev];
|
||
dev->base_addr = io[this_dev];
|
||
if (do_ultra_probe(dev) == 0) {
|
||
if (register_netdev(dev) == 0) {
|
||
dev_ultra[found++] = dev;
|
||
continue;
|
||
}
|
||
cleanup_card(dev);
|
||
}
|
||
free_netdev(dev);
|
||
printk(KERN_WARNING "smc-ultra.c: No SMC Ultra card found (i/o = 0x%x).\n", io[this_dev]);
|
||
break;
|
||
}
|
||
if (found)
|
||
return 0;
|
||
return -ENXIO;
|
||
}
|
||
|
||
void
|
||
cleanup_module(void)
|
||
{
|
||
int this_dev;
|
||
|
||
for (this_dev = 0; this_dev < MAX_ULTRA_CARDS; this_dev++) {
|
||
struct net_device *dev = dev_ultra[this_dev];
|
||
if (dev) {
|
||
unregister_netdev(dev);
|
||
cleanup_card(dev);
|
||
free_netdev(dev);
|
||
}
|
||
}
|
||
}
|
||
#endif /* MODULE */
|