![Daniel Golle](/assets/img/avatar_default.png)
Use PCIe support for MT7628AN also on MT7688. Tested on WRTNODE2R. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Cc: John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: linux-mediatek@lists.infradead.org Patchwork: https://patchwork.linux-mips.org/patch/16223/ Signed-off-by: James Hogan <jhogan@kernel.org>
424 lines
9.8 KiB
C
424 lines
9.8 KiB
C
/*
|
|
* Ralink MT7620A SoC PCI support
|
|
*
|
|
* Copyright (C) 2007-2013 Bruce Chang (Mediatek)
|
|
* Copyright (C) 2013-2016 John Crispin <john@phrozen.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/io.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_pci.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/mach-ralink/ralink_regs.h>
|
|
#include <asm/mach-ralink/mt7620.h>
|
|
|
|
#define RALINK_PCI_IO_MAP_BASE 0x10160000
|
|
#define RALINK_PCI_MEMORY_BASE 0x0
|
|
|
|
#define RALINK_INT_PCIE0 4
|
|
|
|
#define RALINK_CLKCFG1 0x30
|
|
#define RALINK_GPIOMODE 0x60
|
|
|
|
#define PPLL_CFG1 0x9c
|
|
|
|
#define PPLL_DRV 0xa0
|
|
#define PDRV_SW_SET BIT(31)
|
|
#define LC_CKDRVPD BIT(19)
|
|
#define LC_CKDRVOHZ BIT(18)
|
|
#define LC_CKDRVHZ BIT(17)
|
|
#define LC_CKTEST BIT(16)
|
|
|
|
/* PCI Bridge registers */
|
|
#define RALINK_PCI_PCICFG_ADDR 0x00
|
|
#define PCIRST BIT(1)
|
|
|
|
#define RALINK_PCI_PCIENA 0x0C
|
|
#define PCIINT2 BIT(20)
|
|
|
|
#define RALINK_PCI_CONFIG_ADDR 0x20
|
|
#define RALINK_PCI_CONFIG_DATA_VIRT_REG 0x24
|
|
#define RALINK_PCI_MEMBASE 0x28
|
|
#define RALINK_PCI_IOBASE 0x2C
|
|
|
|
/* PCI RC registers */
|
|
#define RALINK_PCI0_BAR0SETUP_ADDR 0x10
|
|
#define RALINK_PCI0_IMBASEBAR0_ADDR 0x18
|
|
#define RALINK_PCI0_ID 0x30
|
|
#define RALINK_PCI0_CLASS 0x34
|
|
#define RALINK_PCI0_SUBID 0x38
|
|
#define RALINK_PCI0_STATUS 0x50
|
|
#define PCIE_LINK_UP_ST BIT(0)
|
|
|
|
#define PCIEPHY0_CFG 0x90
|
|
|
|
#define RALINK_PCIEPHY_P0_CTL_OFFSET 0x7498
|
|
#define RALINK_PCIE0_CLK_EN BIT(26)
|
|
|
|
#define BUSY 0x80000000
|
|
#define WAITRETRY_MAX 10
|
|
#define WRITE_MODE (1UL << 23)
|
|
#define DATA_SHIFT 0
|
|
#define ADDR_SHIFT 8
|
|
|
|
|
|
static void __iomem *bridge_base;
|
|
static void __iomem *pcie_base;
|
|
|
|
static struct reset_control *rstpcie0;
|
|
|
|
static inline void bridge_w32(u32 val, unsigned reg)
|
|
{
|
|
iowrite32(val, bridge_base + reg);
|
|
}
|
|
|
|
static inline u32 bridge_r32(unsigned reg)
|
|
{
|
|
return ioread32(bridge_base + reg);
|
|
}
|
|
|
|
static inline void pcie_w32(u32 val, unsigned reg)
|
|
{
|
|
iowrite32(val, pcie_base + reg);
|
|
}
|
|
|
|
static inline u32 pcie_r32(unsigned reg)
|
|
{
|
|
return ioread32(pcie_base + reg);
|
|
}
|
|
|
|
static inline void pcie_m32(u32 clr, u32 set, unsigned reg)
|
|
{
|
|
u32 val = pcie_r32(reg);
|
|
|
|
val &= ~clr;
|
|
val |= set;
|
|
pcie_w32(val, reg);
|
|
}
|
|
|
|
static int wait_pciephy_busy(void)
|
|
{
|
|
unsigned long reg_value = 0x0, retry = 0;
|
|
|
|
while (1) {
|
|
reg_value = pcie_r32(PCIEPHY0_CFG);
|
|
|
|
if (reg_value & BUSY)
|
|
mdelay(100);
|
|
else
|
|
break;
|
|
if (retry++ > WAITRETRY_MAX) {
|
|
pr_warn("PCIE-PHY retry failed.\n");
|
|
return -1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void pcie_phy(unsigned long addr, unsigned long val)
|
|
{
|
|
wait_pciephy_busy();
|
|
pcie_w32(WRITE_MODE | (val << DATA_SHIFT) | (addr << ADDR_SHIFT),
|
|
PCIEPHY0_CFG);
|
|
mdelay(1);
|
|
wait_pciephy_busy();
|
|
}
|
|
|
|
static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where,
|
|
int size, u32 *val)
|
|
{
|
|
unsigned int slot = PCI_SLOT(devfn);
|
|
u8 func = PCI_FUNC(devfn);
|
|
u32 address;
|
|
u32 data;
|
|
u32 num = 0;
|
|
|
|
if (bus)
|
|
num = bus->number;
|
|
|
|
address = (((where & 0xF00) >> 8) << 24) | (num << 16) | (slot << 11) |
|
|
(func << 8) | (where & 0xfc) | 0x80000000;
|
|
bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
|
|
data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRT_REG);
|
|
|
|
switch (size) {
|
|
case 1:
|
|
*val = (data >> ((where & 3) << 3)) & 0xff;
|
|
break;
|
|
case 2:
|
|
*val = (data >> ((where & 3) << 3)) & 0xffff;
|
|
break;
|
|
case 4:
|
|
*val = data;
|
|
break;
|
|
}
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where,
|
|
int size, u32 val)
|
|
{
|
|
unsigned int slot = PCI_SLOT(devfn);
|
|
u8 func = PCI_FUNC(devfn);
|
|
u32 address;
|
|
u32 data;
|
|
u32 num = 0;
|
|
|
|
if (bus)
|
|
num = bus->number;
|
|
|
|
address = (((where & 0xF00) >> 8) << 24) | (num << 16) | (slot << 11) |
|
|
(func << 8) | (where & 0xfc) | 0x80000000;
|
|
bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
|
|
data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRT_REG);
|
|
|
|
switch (size) {
|
|
case 1:
|
|
data = (data & ~(0xff << ((where & 3) << 3))) |
|
|
(val << ((where & 3) << 3));
|
|
break;
|
|
case 2:
|
|
data = (data & ~(0xffff << ((where & 3) << 3))) |
|
|
(val << ((where & 3) << 3));
|
|
break;
|
|
case 4:
|
|
data = val;
|
|
break;
|
|
}
|
|
|
|
bridge_w32(data, RALINK_PCI_CONFIG_DATA_VIRT_REG);
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
struct pci_ops mt7620_pci_ops = {
|
|
.read = pci_config_read,
|
|
.write = pci_config_write,
|
|
};
|
|
|
|
static struct resource mt7620_res_pci_mem1;
|
|
static struct resource mt7620_res_pci_io1;
|
|
struct pci_controller mt7620_controller = {
|
|
.pci_ops = &mt7620_pci_ops,
|
|
.mem_resource = &mt7620_res_pci_mem1,
|
|
.mem_offset = 0x00000000UL,
|
|
.io_resource = &mt7620_res_pci_io1,
|
|
.io_offset = 0x00000000UL,
|
|
.io_map_base = 0xa0000000,
|
|
};
|
|
|
|
static int mt7620_pci_hw_init(struct platform_device *pdev)
|
|
{
|
|
/* bypass PCIe DLL */
|
|
pcie_phy(0x0, 0x80);
|
|
pcie_phy(0x1, 0x04);
|
|
|
|
/* Elastic buffer control */
|
|
pcie_phy(0x68, 0xB4);
|
|
|
|
/* put core into reset */
|
|
pcie_m32(0, PCIRST, RALINK_PCI_PCICFG_ADDR);
|
|
reset_control_assert(rstpcie0);
|
|
|
|
/* disable power and all clocks */
|
|
rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
|
|
rt_sysc_m32(LC_CKDRVPD, PDRV_SW_SET, PPLL_DRV);
|
|
|
|
/* bring core out of reset */
|
|
reset_control_deassert(rstpcie0);
|
|
rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
|
|
mdelay(100);
|
|
|
|
if (!(rt_sysc_r32(PPLL_CFG1) & PDRV_SW_SET)) {
|
|
dev_err(&pdev->dev, "MT7620 PPLL unlock\n");
|
|
reset_control_assert(rstpcie0);
|
|
rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
|
|
return -1;
|
|
}
|
|
|
|
/* power up the bus */
|
|
rt_sysc_m32(LC_CKDRVHZ | LC_CKDRVOHZ, LC_CKDRVPD | PDRV_SW_SET,
|
|
PPLL_DRV);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt7628_pci_hw_init(struct platform_device *pdev)
|
|
{
|
|
u32 val = 0;
|
|
|
|
/* bring the core out of reset */
|
|
rt_sysc_m32(BIT(16), 0, RALINK_GPIOMODE);
|
|
reset_control_deassert(rstpcie0);
|
|
|
|
/* enable the pci clk */
|
|
rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
|
|
mdelay(100);
|
|
|
|
/* voodoo from the SDK driver */
|
|
pcie_m32(~0xff, 0x5, RALINK_PCIEPHY_P0_CTL_OFFSET);
|
|
|
|
pci_config_read(NULL, 0, 0x70c, 4, &val);
|
|
val &= ~(0xff) << 8;
|
|
val |= 0x50 << 8;
|
|
pci_config_write(NULL, 0, 0x70c, 4, val);
|
|
|
|
pci_config_read(NULL, 0, 0x70c, 4, &val);
|
|
dev_err(&pdev->dev, "Port 0 N_FTS = %x\n", (unsigned int) val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt7620_pci_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *bridge_res = platform_get_resource(pdev,
|
|
IORESOURCE_MEM, 0);
|
|
struct resource *pcie_res = platform_get_resource(pdev,
|
|
IORESOURCE_MEM, 1);
|
|
u32 val = 0;
|
|
|
|
rstpcie0 = devm_reset_control_get_exclusive(&pdev->dev, "pcie0");
|
|
if (IS_ERR(rstpcie0))
|
|
return PTR_ERR(rstpcie0);
|
|
|
|
bridge_base = devm_ioremap_resource(&pdev->dev, bridge_res);
|
|
if (IS_ERR(bridge_base))
|
|
return PTR_ERR(bridge_base);
|
|
|
|
pcie_base = devm_ioremap_resource(&pdev->dev, pcie_res);
|
|
if (IS_ERR(pcie_base))
|
|
return PTR_ERR(pcie_base);
|
|
|
|
iomem_resource.start = 0;
|
|
iomem_resource.end = ~0;
|
|
ioport_resource.start = 0;
|
|
ioport_resource.end = ~0;
|
|
|
|
/* bring up the pci core */
|
|
switch (ralink_soc) {
|
|
case MT762X_SOC_MT7620A:
|
|
if (mt7620_pci_hw_init(pdev))
|
|
return -1;
|
|
break;
|
|
|
|
case MT762X_SOC_MT7628AN:
|
|
case MT762X_SOC_MT7688:
|
|
if (mt7628_pci_hw_init(pdev))
|
|
return -1;
|
|
break;
|
|
|
|
default:
|
|
dev_err(&pdev->dev, "pcie is not supported on this hardware\n");
|
|
return -1;
|
|
}
|
|
mdelay(50);
|
|
|
|
/* enable write access */
|
|
pcie_m32(PCIRST, 0, RALINK_PCI_PCICFG_ADDR);
|
|
mdelay(100);
|
|
|
|
/* check if there is a card present */
|
|
if ((pcie_r32(RALINK_PCI0_STATUS) & PCIE_LINK_UP_ST) == 0) {
|
|
reset_control_assert(rstpcie0);
|
|
rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
|
|
if (ralink_soc == MT762X_SOC_MT7620A)
|
|
rt_sysc_m32(LC_CKDRVPD, PDRV_SW_SET, PPLL_DRV);
|
|
dev_err(&pdev->dev, "PCIE0 no card, disable it(RST&CLK)\n");
|
|
return -1;
|
|
}
|
|
|
|
/* setup ranges */
|
|
bridge_w32(0xffffffff, RALINK_PCI_MEMBASE);
|
|
bridge_w32(RALINK_PCI_IO_MAP_BASE, RALINK_PCI_IOBASE);
|
|
|
|
pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR);
|
|
pcie_w32(RALINK_PCI_MEMORY_BASE, RALINK_PCI0_IMBASEBAR0_ADDR);
|
|
pcie_w32(0x06040001, RALINK_PCI0_CLASS);
|
|
|
|
/* enable interrupts */
|
|
pcie_m32(0, PCIINT2, RALINK_PCI_PCIENA);
|
|
|
|
/* voodoo from the SDK driver */
|
|
pci_config_read(NULL, 0, 4, 4, &val);
|
|
pci_config_write(NULL, 0, 4, 4, val | 0x7);
|
|
|
|
pci_load_of_ranges(&mt7620_controller, pdev->dev.of_node);
|
|
register_pci_controller(&mt7620_controller);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
|
|
{
|
|
u16 cmd;
|
|
u32 val;
|
|
int irq = 0;
|
|
|
|
if ((dev->bus->number == 0) && (slot == 0)) {
|
|
pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR);
|
|
pci_config_write(dev->bus, 0, PCI_BASE_ADDRESS_0, 4,
|
|
RALINK_PCI_MEMORY_BASE);
|
|
pci_config_read(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, &val);
|
|
} else if ((dev->bus->number == 1) && (slot == 0x0)) {
|
|
irq = RALINK_INT_PCIE0;
|
|
} else {
|
|
dev_err(&dev->dev, "no irq found - bus=0x%x, slot = 0x%x\n",
|
|
dev->bus->number, slot);
|
|
return 0;
|
|
}
|
|
dev_err(&dev->dev, "card - bus=0x%x, slot = 0x%x irq=%d\n",
|
|
dev->bus->number, slot, irq);
|
|
|
|
/* configure the cache line size to 0x14 */
|
|
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14);
|
|
|
|
/* configure latency timer to 0xff */
|
|
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xff);
|
|
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
|
|
/* setup the slot */
|
|
cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
|
|
pci_write_config_word(dev, PCI_COMMAND, cmd);
|
|
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
|
|
|
|
return irq;
|
|
}
|
|
|
|
int pcibios_plat_dev_init(struct pci_dev *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id mt7620_pci_ids[] = {
|
|
{ .compatible = "mediatek,mt7620-pci" },
|
|
{},
|
|
};
|
|
|
|
static struct platform_driver mt7620_pci_driver = {
|
|
.probe = mt7620_pci_probe,
|
|
.driver = {
|
|
.name = "mt7620-pci",
|
|
.of_match_table = of_match_ptr(mt7620_pci_ids),
|
|
},
|
|
};
|
|
|
|
static int __init mt7620_pci_init(void)
|
|
{
|
|
return platform_driver_register(&mt7620_pci_driver);
|
|
}
|
|
|
|
arch_initcall(mt7620_pci_init);
|