e45a1e18a5
The debug-ll infrastructure can be configured in two ways, either by selecting a platform specific debug option, or by picking one of the generic options (8250 or pl01x typically). For compatibility with multiplatform kernels, we have changed a couple of platforms to use the former method now when they used to use the latter. Unfortunately, this broke the defconfigs because now they still enable CONFIG_DEBUG_LL_UART_PL01X or CONFIG_DEBUG_LL_UART_8250, and we no longer configure the correct register addresses automatically. Embarrassingly, this was only found in linux-next when the defconfig builds turned up errors for multiple people, and I had not caught those in my own tests, which were done using the randconfig fixes patchset on top, and that has a workaround to avoid a build error when the addresses are not configured. The error was something like: .config:2010:warning: symbol value '' invalid for DEBUG_UART_PHYS .config:2011:warning: symbol value '' invalid for DEBUG_UART_VIRT This patch avoids the problem by removing the respective statements from the defconfig files. Any out of tree defconfig files on the platforms I have changed will have to do the same change or run into the build error above. Any users that have a full .config already set the correct DEBUG_UART_PHYS/VIRT addresses and do not need to change anything. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes:4db22c1("ARM: debug-ll: rework integrator/versatile handling") Fixes:f06455f("ARM: debug-ll: rework ep93xx handling") Fixes:c047f52("ARM: debug-ll: reorganize mvebu debug uart config") Fixes:59bd4c3("ARM: debug-ll: rework lpc32xx handling")
137 lines
3 KiB
Plaintext
137 lines
3 KiB
Plaintext
CONFIG_SYSVIPC=y
|
|
CONFIG_NO_HZ_IDLE=y
|
|
CONFIG_HIGH_RES_TIMERS=y
|
|
CONFIG_IKCONFIG=y
|
|
CONFIG_IKCONFIG_PROC=y
|
|
CONFIG_LOG_BUF_SHIFT=14
|
|
CONFIG_EXPERT=y
|
|
CONFIG_SLAB=y
|
|
CONFIG_MODULES=y
|
|
CONFIG_MODULE_UNLOAD=y
|
|
CONFIG_MODULE_FORCE_UNLOAD=y
|
|
# CONFIG_BLK_DEV_BSG is not set
|
|
CONFIG_PARTITION_ADVANCED=y
|
|
# CONFIG_IOSCHED_CFQ is not set
|
|
CONFIG_ARCH_EP93XX=y
|
|
CONFIG_CRUNCH=y
|
|
CONFIG_MACH_ADSSPHERE=y
|
|
CONFIG_MACH_EDB9301=y
|
|
CONFIG_MACH_EDB9302=y
|
|
CONFIG_MACH_EDB9302A=y
|
|
CONFIG_MACH_EDB9307=y
|
|
CONFIG_MACH_EDB9307A=y
|
|
CONFIG_MACH_EDB9312=y
|
|
CONFIG_MACH_EDB9315=y
|
|
CONFIG_MACH_EDB9315A=y
|
|
CONFIG_MACH_GESBC9312=y
|
|
CONFIG_MACH_MICRO9H=y
|
|
CONFIG_MACH_MICRO9M=y
|
|
CONFIG_MACH_MICRO9L=y
|
|
CONFIG_MACH_MICRO9S=y
|
|
CONFIG_MACH_SIM_ONE=y
|
|
CONFIG_MACH_SNAPPER_CL15=y
|
|
CONFIG_MACH_TS72XX=y
|
|
CONFIG_MACH_VISION_EP9307=y
|
|
CONFIG_AEABI=y
|
|
CONFIG_ZBOOT_ROM_TEXT=0x0
|
|
CONFIG_ZBOOT_ROM_BSS=0x0
|
|
CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp"
|
|
CONFIG_NET=y
|
|
CONFIG_PACKET=y
|
|
CONFIG_UNIX=y
|
|
CONFIG_NET_KEY=y
|
|
CONFIG_INET=y
|
|
CONFIG_IP_PNP=y
|
|
CONFIG_IP_PNP_DHCP=y
|
|
CONFIG_IP_PNP_BOOTP=y
|
|
CONFIG_SYN_COOKIES=y
|
|
# CONFIG_INET_LRO is not set
|
|
CONFIG_IPV6=y
|
|
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
|
|
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
|
|
# CONFIG_INET6_XFRM_MODE_BEET is not set
|
|
# CONFIG_IPV6_SIT is not set
|
|
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
|
# CONFIG_FW_LOADER is not set
|
|
CONFIG_MTD=y
|
|
CONFIG_MTD_REDBOOT_PARTS=y
|
|
CONFIG_MTD_CMDLINE_PARTS=y
|
|
CONFIG_MTD_BLOCK=y
|
|
CONFIG_MTD_CFI=y
|
|
CONFIG_MTD_CFI_ADV_OPTIONS=y
|
|
CONFIG_MTD_CFI_INTELEXT=y
|
|
CONFIG_MTD_CFI_AMDSTD=y
|
|
CONFIG_MTD_CFI_STAA=y
|
|
CONFIG_MTD_ROM=y
|
|
CONFIG_MTD_PHYSMAP=y
|
|
CONFIG_MTD_NAND=y
|
|
CONFIG_BLK_DEV_NBD=y
|
|
CONFIG_EEPROM_LEGACY=y
|
|
CONFIG_SCSI=y
|
|
# CONFIG_SCSI_PROC_FS is not set
|
|
CONFIG_BLK_DEV_SD=y
|
|
CONFIG_NETDEVICES=y
|
|
CONFIG_EP93XX_ETH=y
|
|
CONFIG_USB_RTL8150=y
|
|
# CONFIG_INPUT is not set
|
|
# CONFIG_SERIO is not set
|
|
# CONFIG_VT is not set
|
|
# CONFIG_LEGACY_PTYS is not set
|
|
CONFIG_SERIAL_AMBA_PL010=y
|
|
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
|
|
# CONFIG_HW_RANDOM is not set
|
|
CONFIG_I2C=y
|
|
CONFIG_I2C_CHARDEV=y
|
|
CONFIG_I2C_GPIO=y
|
|
CONFIG_I2C_DEBUG_CORE=y
|
|
CONFIG_I2C_DEBUG_ALGO=y
|
|
CONFIG_I2C_DEBUG_BUS=y
|
|
CONFIG_SPI=y
|
|
CONFIG_SPI_EP93XX=y
|
|
CONFIG_WATCHDOG=y
|
|
CONFIG_EP93XX_WATCHDOG=y
|
|
CONFIG_FB=y
|
|
CONFIG_FB_MODE_HELPERS=y
|
|
CONFIG_FB_EP93XX=y
|
|
CONFIG_LOGO=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_DYNAMIC_MINORS=y
|
|
CONFIG_USB_OHCI_HCD=y
|
|
CONFIG_USB_OHCI_HCD_PLATFORM=y
|
|
CONFIG_USB_STORAGE=y
|
|
CONFIG_USB_SERIAL=y
|
|
CONFIG_USB_SERIAL_CONSOLE=y
|
|
CONFIG_USB_SERIAL_PL2303=y
|
|
CONFIG_MMC=y
|
|
CONFIG_MMC_SPI=y
|
|
CONFIG_NEW_LEDS=y
|
|
CONFIG_LEDS_CLASS=y
|
|
CONFIG_LEDS_GPIO=y
|
|
CONFIG_LEDS_TRIGGERS=y
|
|
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
|
CONFIG_RTC_CLASS=y
|
|
CONFIG_RTC_DRV_DS1307=y
|
|
CONFIG_RTC_DRV_M48T86=y
|
|
CONFIG_RTC_DRV_EP93XX=y
|
|
CONFIG_DMADEVICES=y
|
|
CONFIG_EP93XX_DMA=y
|
|
CONFIG_EXT2_FS=y
|
|
CONFIG_EXT3_FS=y
|
|
# CONFIG_EXT3_FS_XATTR is not set
|
|
CONFIG_EXT4_FS=y
|
|
CONFIG_VFAT_FS=y
|
|
CONFIG_TMPFS=y
|
|
CONFIG_JFFS2_FS=y
|
|
CONFIG_NFS_FS=y
|
|
CONFIG_ROOT_NFS=y
|
|
CONFIG_NLS_CODEPAGE_437=y
|
|
CONFIG_NLS_ISO8859_1=y
|
|
CONFIG_MAGIC_SYSRQ=y
|
|
CONFIG_DEBUG_SLAB=y
|
|
CONFIG_DEBUG_SPINLOCK=y
|
|
CONFIG_DEBUG_MUTEXES=y
|
|
CONFIG_DEBUG_USER=y
|
|
CONFIG_DEBUG_LL=y
|
|
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
|
CONFIG_LIBCRC32C=y
|