![Steve Hodgson](/assets/img/avatar_default.png)
This prevents efx->link_advertising from being blatted during a reset. The phy_short_reach sysfs node is now destroyed later in the port shutdown process, so check for STATE_RUNNING after acquiring the rtnl_lock (just like in set_phy_flash_cfg). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1011 lines
32 KiB
C
1011 lines
32 KiB
C
/****************************************************************************
|
|
* Driver for Solarflare Solarstorm network controllers and boards
|
|
* Copyright 2005-2006 Fen Systems Ltd.
|
|
* Copyright 2005-2009 Solarflare Communications Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation, incorporated herein by reference.
|
|
*/
|
|
|
|
/* Common definitions for all Efx net driver code */
|
|
|
|
#ifndef EFX_NET_DRIVER_H
|
|
#define EFX_NET_DRIVER_H
|
|
|
|
#include <linux/version.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/mdio.h>
|
|
#include <linux/list.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/device.h>
|
|
#include <linux/highmem.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/i2c.h>
|
|
|
|
#include "enum.h"
|
|
#include "bitfield.h"
|
|
|
|
/**************************************************************************
|
|
*
|
|
* Build definitions
|
|
*
|
|
**************************************************************************/
|
|
#ifndef EFX_DRIVER_NAME
|
|
#define EFX_DRIVER_NAME "sfc"
|
|
#endif
|
|
#define EFX_DRIVER_VERSION "3.0"
|
|
|
|
#ifdef EFX_ENABLE_DEBUG
|
|
#define EFX_BUG_ON_PARANOID(x) BUG_ON(x)
|
|
#define EFX_WARN_ON_PARANOID(x) WARN_ON(x)
|
|
#else
|
|
#define EFX_BUG_ON_PARANOID(x) do {} while (0)
|
|
#define EFX_WARN_ON_PARANOID(x) do {} while (0)
|
|
#endif
|
|
|
|
/* Un-rate-limited logging */
|
|
#define EFX_ERR(efx, fmt, args...) \
|
|
dev_err(&((efx)->pci_dev->dev), "ERR: %s " fmt, efx_dev_name(efx), ##args)
|
|
|
|
#define EFX_INFO(efx, fmt, args...) \
|
|
dev_info(&((efx)->pci_dev->dev), "INFO: %s " fmt, efx_dev_name(efx), ##args)
|
|
|
|
#ifdef EFX_ENABLE_DEBUG
|
|
#define EFX_LOG(efx, fmt, args...) \
|
|
dev_info(&((efx)->pci_dev->dev), "DBG: %s " fmt, efx_dev_name(efx), ##args)
|
|
#else
|
|
#define EFX_LOG(efx, fmt, args...) \
|
|
dev_dbg(&((efx)->pci_dev->dev), "DBG: %s " fmt, efx_dev_name(efx), ##args)
|
|
#endif
|
|
|
|
#define EFX_TRACE(efx, fmt, args...) do {} while (0)
|
|
|
|
#define EFX_REGDUMP(efx, fmt, args...) do {} while (0)
|
|
|
|
/* Rate-limited logging */
|
|
#define EFX_ERR_RL(efx, fmt, args...) \
|
|
do {if (net_ratelimit()) EFX_ERR(efx, fmt, ##args); } while (0)
|
|
|
|
#define EFX_INFO_RL(efx, fmt, args...) \
|
|
do {if (net_ratelimit()) EFX_INFO(efx, fmt, ##args); } while (0)
|
|
|
|
#define EFX_LOG_RL(efx, fmt, args...) \
|
|
do {if (net_ratelimit()) EFX_LOG(efx, fmt, ##args); } while (0)
|
|
|
|
/**************************************************************************
|
|
*
|
|
* Efx data structures
|
|
*
|
|
**************************************************************************/
|
|
|
|
#define EFX_MAX_CHANNELS 32
|
|
#define EFX_MAX_RX_QUEUES EFX_MAX_CHANNELS
|
|
|
|
#define EFX_TX_QUEUE_OFFLOAD_CSUM 0
|
|
#define EFX_TX_QUEUE_NO_CSUM 1
|
|
#define EFX_TX_QUEUE_COUNT 2
|
|
|
|
/**
|
|
* struct efx_special_buffer - An Efx special buffer
|
|
* @addr: CPU base address of the buffer
|
|
* @dma_addr: DMA base address of the buffer
|
|
* @len: Buffer length, in bytes
|
|
* @index: Buffer index within controller;s buffer table
|
|
* @entries: Number of buffer table entries
|
|
*
|
|
* Special buffers are used for the event queues and the TX and RX
|
|
* descriptor queues for each channel. They are *not* used for the
|
|
* actual transmit and receive buffers.
|
|
*
|
|
* Note that for Falcon, TX and RX descriptor queues live in host memory.
|
|
* Allocation and freeing procedures must take this into account.
|
|
*/
|
|
struct efx_special_buffer {
|
|
void *addr;
|
|
dma_addr_t dma_addr;
|
|
unsigned int len;
|
|
int index;
|
|
int entries;
|
|
};
|
|
|
|
enum efx_flush_state {
|
|
FLUSH_NONE,
|
|
FLUSH_PENDING,
|
|
FLUSH_FAILED,
|
|
FLUSH_DONE,
|
|
};
|
|
|
|
/**
|
|
* struct efx_tx_buffer - An Efx TX buffer
|
|
* @skb: The associated socket buffer.
|
|
* Set only on the final fragment of a packet; %NULL for all other
|
|
* fragments. When this fragment completes, then we can free this
|
|
* skb.
|
|
* @tsoh: The associated TSO header structure, or %NULL if this
|
|
* buffer is not a TSO header.
|
|
* @dma_addr: DMA address of the fragment.
|
|
* @len: Length of this fragment.
|
|
* This field is zero when the queue slot is empty.
|
|
* @continuation: True if this fragment is not the end of a packet.
|
|
* @unmap_single: True if pci_unmap_single should be used.
|
|
* @unmap_len: Length of this fragment to unmap
|
|
*/
|
|
struct efx_tx_buffer {
|
|
const struct sk_buff *skb;
|
|
struct efx_tso_header *tsoh;
|
|
dma_addr_t dma_addr;
|
|
unsigned short len;
|
|
bool continuation;
|
|
bool unmap_single;
|
|
unsigned short unmap_len;
|
|
};
|
|
|
|
/**
|
|
* struct efx_tx_queue - An Efx TX queue
|
|
*
|
|
* This is a ring buffer of TX fragments.
|
|
* Since the TX completion path always executes on the same
|
|
* CPU and the xmit path can operate on different CPUs,
|
|
* performance is increased by ensuring that the completion
|
|
* path and the xmit path operate on different cache lines.
|
|
* This is particularly important if the xmit path is always
|
|
* executing on one CPU which is different from the completion
|
|
* path. There is also a cache line for members which are
|
|
* read but not written on the fast path.
|
|
*
|
|
* @efx: The associated Efx NIC
|
|
* @queue: DMA queue number
|
|
* @channel: The associated channel
|
|
* @buffer: The software buffer ring
|
|
* @txd: The hardware descriptor ring
|
|
* @flushed: Used when handling queue flushing
|
|
* @read_count: Current read pointer.
|
|
* This is the number of buffers that have been removed from both rings.
|
|
* @stopped: Stopped count.
|
|
* Set if this TX queue is currently stopping its port.
|
|
* @insert_count: Current insert pointer
|
|
* This is the number of buffers that have been added to the
|
|
* software ring.
|
|
* @write_count: Current write pointer
|
|
* This is the number of buffers that have been added to the
|
|
* hardware ring.
|
|
* @old_read_count: The value of read_count when last checked.
|
|
* This is here for performance reasons. The xmit path will
|
|
* only get the up-to-date value of read_count if this
|
|
* variable indicates that the queue is full. This is to
|
|
* avoid cache-line ping-pong between the xmit path and the
|
|
* completion path.
|
|
* @tso_headers_free: A list of TSO headers allocated for this TX queue
|
|
* that are not in use, and so available for new TSO sends. The list
|
|
* is protected by the TX queue lock.
|
|
* @tso_bursts: Number of times TSO xmit invoked by kernel
|
|
* @tso_long_headers: Number of packets with headers too long for standard
|
|
* blocks
|
|
* @tso_packets: Number of packets via the TSO xmit path
|
|
*/
|
|
struct efx_tx_queue {
|
|
/* Members which don't change on the fast path */
|
|
struct efx_nic *efx ____cacheline_aligned_in_smp;
|
|
int queue;
|
|
struct efx_channel *channel;
|
|
struct efx_nic *nic;
|
|
struct efx_tx_buffer *buffer;
|
|
struct efx_special_buffer txd;
|
|
enum efx_flush_state flushed;
|
|
|
|
/* Members used mainly on the completion path */
|
|
unsigned int read_count ____cacheline_aligned_in_smp;
|
|
int stopped;
|
|
|
|
/* Members used only on the xmit path */
|
|
unsigned int insert_count ____cacheline_aligned_in_smp;
|
|
unsigned int write_count;
|
|
unsigned int old_read_count;
|
|
struct efx_tso_header *tso_headers_free;
|
|
unsigned int tso_bursts;
|
|
unsigned int tso_long_headers;
|
|
unsigned int tso_packets;
|
|
};
|
|
|
|
/**
|
|
* struct efx_rx_buffer - An Efx RX data buffer
|
|
* @dma_addr: DMA base address of the buffer
|
|
* @skb: The associated socket buffer, if any.
|
|
* If both this and page are %NULL, the buffer slot is currently free.
|
|
* @page: The associated page buffer, if any.
|
|
* If both this and skb are %NULL, the buffer slot is currently free.
|
|
* @data: Pointer to ethernet header
|
|
* @len: Buffer length, in bytes.
|
|
* @unmap_addr: DMA address to unmap
|
|
*/
|
|
struct efx_rx_buffer {
|
|
dma_addr_t dma_addr;
|
|
struct sk_buff *skb;
|
|
struct page *page;
|
|
char *data;
|
|
unsigned int len;
|
|
dma_addr_t unmap_addr;
|
|
};
|
|
|
|
/**
|
|
* struct efx_rx_queue - An Efx RX queue
|
|
* @efx: The associated Efx NIC
|
|
* @queue: DMA queue number
|
|
* @channel: The associated channel
|
|
* @buffer: The software buffer ring
|
|
* @rxd: The hardware descriptor ring
|
|
* @added_count: Number of buffers added to the receive queue.
|
|
* @notified_count: Number of buffers given to NIC (<= @added_count).
|
|
* @removed_count: Number of buffers removed from the receive queue.
|
|
* @add_lock: Receive queue descriptor add spin lock.
|
|
* This lock must be held in order to add buffers to the RX
|
|
* descriptor ring (rxd and buffer) and to update added_count (but
|
|
* not removed_count).
|
|
* @max_fill: RX descriptor maximum fill level (<= ring size)
|
|
* @fast_fill_trigger: RX descriptor fill level that will trigger a fast fill
|
|
* (<= @max_fill)
|
|
* @fast_fill_limit: The level to which a fast fill will fill
|
|
* (@fast_fill_trigger <= @fast_fill_limit <= @max_fill)
|
|
* @min_fill: RX descriptor minimum non-zero fill level.
|
|
* This records the minimum fill level observed when a ring
|
|
* refill was triggered.
|
|
* @min_overfill: RX descriptor minimum overflow fill level.
|
|
* This records the minimum fill level at which RX queue
|
|
* overflow was observed. It should never be set.
|
|
* @alloc_page_count: RX allocation strategy counter.
|
|
* @alloc_skb_count: RX allocation strategy counter.
|
|
* @work: Descriptor push work thread
|
|
* @buf_page: Page for next RX buffer.
|
|
* We can use a single page for multiple RX buffers. This tracks
|
|
* the remaining space in the allocation.
|
|
* @buf_dma_addr: Page's DMA address.
|
|
* @buf_data: Page's host address.
|
|
* @flushed: Use when handling queue flushing
|
|
*/
|
|
struct efx_rx_queue {
|
|
struct efx_nic *efx;
|
|
int queue;
|
|
struct efx_channel *channel;
|
|
struct efx_rx_buffer *buffer;
|
|
struct efx_special_buffer rxd;
|
|
|
|
int added_count;
|
|
int notified_count;
|
|
int removed_count;
|
|
spinlock_t add_lock;
|
|
unsigned int max_fill;
|
|
unsigned int fast_fill_trigger;
|
|
unsigned int fast_fill_limit;
|
|
unsigned int min_fill;
|
|
unsigned int min_overfill;
|
|
unsigned int alloc_page_count;
|
|
unsigned int alloc_skb_count;
|
|
struct delayed_work work;
|
|
unsigned int slow_fill_count;
|
|
|
|
struct page *buf_page;
|
|
dma_addr_t buf_dma_addr;
|
|
char *buf_data;
|
|
enum efx_flush_state flushed;
|
|
};
|
|
|
|
/**
|
|
* struct efx_buffer - An Efx general-purpose buffer
|
|
* @addr: host base address of the buffer
|
|
* @dma_addr: DMA base address of the buffer
|
|
* @len: Buffer length, in bytes
|
|
*
|
|
* Falcon uses these buffers for its interrupt status registers and
|
|
* MAC stats dumps.
|
|
*/
|
|
struct efx_buffer {
|
|
void *addr;
|
|
dma_addr_t dma_addr;
|
|
unsigned int len;
|
|
};
|
|
|
|
|
|
/* Flags for channel->used_flags */
|
|
#define EFX_USED_BY_RX 1
|
|
#define EFX_USED_BY_TX 2
|
|
#define EFX_USED_BY_RX_TX (EFX_USED_BY_RX | EFX_USED_BY_TX)
|
|
|
|
enum efx_rx_alloc_method {
|
|
RX_ALLOC_METHOD_AUTO = 0,
|
|
RX_ALLOC_METHOD_SKB = 1,
|
|
RX_ALLOC_METHOD_PAGE = 2,
|
|
};
|
|
|
|
/**
|
|
* struct efx_channel - An Efx channel
|
|
*
|
|
* A channel comprises an event queue, at least one TX queue, at least
|
|
* one RX queue, and an associated tasklet for processing the event
|
|
* queue.
|
|
*
|
|
* @efx: Associated Efx NIC
|
|
* @channel: Channel instance number
|
|
* @name: Name for channel and IRQ
|
|
* @used_flags: Channel is used by net driver
|
|
* @enabled: Channel enabled indicator
|
|
* @irq: IRQ number (MSI and MSI-X only)
|
|
* @irq_moderation: IRQ moderation value (in hardware ticks)
|
|
* @napi_dev: Net device used with NAPI
|
|
* @napi_str: NAPI control structure
|
|
* @reset_work: Scheduled reset work thread
|
|
* @work_pending: Is work pending via NAPI?
|
|
* @eventq: Event queue buffer
|
|
* @eventq_read_ptr: Event queue read pointer
|
|
* @last_eventq_read_ptr: Last event queue read pointer value.
|
|
* @eventq_magic: Event queue magic value for driver-generated test events
|
|
* @irq_count: Number of IRQs since last adaptive moderation decision
|
|
* @irq_mod_score: IRQ moderation score
|
|
* @rx_alloc_level: Watermark based heuristic counter for pushing descriptors
|
|
* and diagnostic counters
|
|
* @rx_alloc_push_pages: RX allocation method currently in use for pushing
|
|
* descriptors
|
|
* @n_rx_tobe_disc: Count of RX_TOBE_DISC errors
|
|
* @n_rx_ip_hdr_chksum_err: Count of RX IP header checksum errors
|
|
* @n_rx_tcp_udp_chksum_err: Count of RX TCP and UDP checksum errors
|
|
* @n_rx_mcast_mismatch: Count of unmatched multicast frames
|
|
* @n_rx_frm_trunc: Count of RX_FRM_TRUNC errors
|
|
* @n_rx_overlength: Count of RX_OVERLENGTH errors
|
|
* @n_skbuff_leaks: Count of skbuffs leaked due to RX overrun
|
|
*/
|
|
struct efx_channel {
|
|
struct efx_nic *efx;
|
|
int channel;
|
|
char name[IFNAMSIZ + 6];
|
|
int used_flags;
|
|
bool enabled;
|
|
int irq;
|
|
unsigned int irq_moderation;
|
|
struct net_device *napi_dev;
|
|
struct napi_struct napi_str;
|
|
bool work_pending;
|
|
struct efx_special_buffer eventq;
|
|
unsigned int eventq_read_ptr;
|
|
unsigned int last_eventq_read_ptr;
|
|
unsigned int eventq_magic;
|
|
|
|
unsigned int irq_count;
|
|
unsigned int irq_mod_score;
|
|
|
|
int rx_alloc_level;
|
|
int rx_alloc_push_pages;
|
|
|
|
unsigned n_rx_tobe_disc;
|
|
unsigned n_rx_ip_hdr_chksum_err;
|
|
unsigned n_rx_tcp_udp_chksum_err;
|
|
unsigned n_rx_mcast_mismatch;
|
|
unsigned n_rx_frm_trunc;
|
|
unsigned n_rx_overlength;
|
|
unsigned n_skbuff_leaks;
|
|
|
|
/* Used to pipeline received packets in order to optimise memory
|
|
* access with prefetches.
|
|
*/
|
|
struct efx_rx_buffer *rx_pkt;
|
|
bool rx_pkt_csummed;
|
|
|
|
};
|
|
|
|
enum efx_led_mode {
|
|
EFX_LED_OFF = 0,
|
|
EFX_LED_ON = 1,
|
|
EFX_LED_DEFAULT = 2
|
|
};
|
|
|
|
#define STRING_TABLE_LOOKUP(val, member) \
|
|
((val) < member ## _max) ? member ## _names[val] : "(invalid)"
|
|
|
|
extern const char *efx_loopback_mode_names[];
|
|
extern const unsigned int efx_loopback_mode_max;
|
|
#define LOOPBACK_MODE(efx) \
|
|
STRING_TABLE_LOOKUP((efx)->loopback_mode, efx_loopback_mode)
|
|
|
|
extern const char *efx_interrupt_mode_names[];
|
|
extern const unsigned int efx_interrupt_mode_max;
|
|
#define INT_MODE(efx) \
|
|
STRING_TABLE_LOOKUP(efx->interrupt_mode, efx_interrupt_mode)
|
|
|
|
extern const char *efx_reset_type_names[];
|
|
extern const unsigned int efx_reset_type_max;
|
|
#define RESET_TYPE(type) \
|
|
STRING_TABLE_LOOKUP(type, efx_reset_type)
|
|
|
|
enum efx_int_mode {
|
|
/* Be careful if altering to correct macro below */
|
|
EFX_INT_MODE_MSIX = 0,
|
|
EFX_INT_MODE_MSI = 1,
|
|
EFX_INT_MODE_LEGACY = 2,
|
|
EFX_INT_MODE_MAX /* Insert any new items before this */
|
|
};
|
|
#define EFX_INT_MODE_USE_MSI(x) (((x)->interrupt_mode) <= EFX_INT_MODE_MSI)
|
|
|
|
#define EFX_IS10G(efx) ((efx)->link_state.speed == 10000)
|
|
|
|
enum nic_state {
|
|
STATE_INIT = 0,
|
|
STATE_RUNNING = 1,
|
|
STATE_FINI = 2,
|
|
STATE_DISABLED = 3,
|
|
STATE_MAX,
|
|
};
|
|
|
|
/*
|
|
* Alignment of page-allocated RX buffers
|
|
*
|
|
* Controls the number of bytes inserted at the start of an RX buffer.
|
|
* This is the equivalent of NET_IP_ALIGN [which controls the alignment
|
|
* of the skb->head for hardware DMA].
|
|
*/
|
|
#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
|
|
#define EFX_PAGE_IP_ALIGN 0
|
|
#else
|
|
#define EFX_PAGE_IP_ALIGN NET_IP_ALIGN
|
|
#endif
|
|
|
|
/*
|
|
* Alignment of the skb->head which wraps a page-allocated RX buffer
|
|
*
|
|
* The skb allocated to wrap an rx_buffer can have this alignment. Since
|
|
* the data is memcpy'd from the rx_buf, it does not need to be equal to
|
|
* EFX_PAGE_IP_ALIGN.
|
|
*/
|
|
#define EFX_PAGE_SKB_ALIGN 2
|
|
|
|
/* Forward declaration */
|
|
struct efx_nic;
|
|
|
|
/* Pseudo bit-mask flow control field */
|
|
enum efx_fc_type {
|
|
EFX_FC_RX = FLOW_CTRL_RX,
|
|
EFX_FC_TX = FLOW_CTRL_TX,
|
|
EFX_FC_AUTO = 4,
|
|
};
|
|
|
|
/**
|
|
* struct efx_link_state - Current state of the link
|
|
* @up: Link is up
|
|
* @fd: Link is full-duplex
|
|
* @fc: Actual flow control flags
|
|
* @speed: Link speed (Mbps)
|
|
*/
|
|
struct efx_link_state {
|
|
bool up;
|
|
bool fd;
|
|
enum efx_fc_type fc;
|
|
unsigned int speed;
|
|
};
|
|
|
|
static inline bool efx_link_state_equal(const struct efx_link_state *left,
|
|
const struct efx_link_state *right)
|
|
{
|
|
return left->up == right->up && left->fd == right->fd &&
|
|
left->fc == right->fc && left->speed == right->speed;
|
|
}
|
|
|
|
/**
|
|
* struct efx_mac_operations - Efx MAC operations table
|
|
* @reconfigure: Reconfigure MAC. Serialised by the mac_lock
|
|
* @update_stats: Update statistics
|
|
* @check_fault: Check fault state. True if fault present.
|
|
*/
|
|
struct efx_mac_operations {
|
|
int (*reconfigure) (struct efx_nic *efx);
|
|
void (*update_stats) (struct efx_nic *efx);
|
|
bool (*check_fault)(struct efx_nic *efx);
|
|
};
|
|
|
|
/**
|
|
* struct efx_phy_operations - Efx PHY operations table
|
|
* @probe: Probe PHY and initialise efx->mdio.mode_support, efx->mdio.mmds,
|
|
* efx->loopback_modes.
|
|
* @init: Initialise PHY
|
|
* @fini: Shut down PHY
|
|
* @reconfigure: Reconfigure PHY (e.g. for new link parameters)
|
|
* @poll: Update @link_state and report whether it changed.
|
|
* Serialised by the mac_lock.
|
|
* @get_settings: Get ethtool settings. Serialised by the mac_lock.
|
|
* @set_settings: Set ethtool settings. Serialised by the mac_lock.
|
|
* @set_npage_adv: Set abilities advertised in (Extended) Next Page
|
|
* (only needed where AN bit is set in mmds)
|
|
* @test_name: Get the name of a PHY-specific test/result
|
|
* @run_tests: Run tests and record results as appropriate.
|
|
* Flags are the ethtool tests flags.
|
|
*/
|
|
struct efx_phy_operations {
|
|
int (*probe) (struct efx_nic *efx);
|
|
int (*init) (struct efx_nic *efx);
|
|
void (*fini) (struct efx_nic *efx);
|
|
void (*remove) (struct efx_nic *efx);
|
|
int (*reconfigure) (struct efx_nic *efx);
|
|
bool (*poll) (struct efx_nic *efx);
|
|
void (*get_settings) (struct efx_nic *efx,
|
|
struct ethtool_cmd *ecmd);
|
|
int (*set_settings) (struct efx_nic *efx,
|
|
struct ethtool_cmd *ecmd);
|
|
void (*set_npage_adv) (struct efx_nic *efx, u32);
|
|
const char *(*test_name) (struct efx_nic *efx, unsigned int index);
|
|
int (*run_tests) (struct efx_nic *efx, int *results, unsigned flags);
|
|
};
|
|
|
|
/**
|
|
* @enum efx_phy_mode - PHY operating mode flags
|
|
* @PHY_MODE_NORMAL: on and should pass traffic
|
|
* @PHY_MODE_TX_DISABLED: on with TX disabled
|
|
* @PHY_MODE_LOW_POWER: set to low power through MDIO
|
|
* @PHY_MODE_OFF: switched off through external control
|
|
* @PHY_MODE_SPECIAL: on but will not pass traffic
|
|
*/
|
|
enum efx_phy_mode {
|
|
PHY_MODE_NORMAL = 0,
|
|
PHY_MODE_TX_DISABLED = 1,
|
|
PHY_MODE_LOW_POWER = 2,
|
|
PHY_MODE_OFF = 4,
|
|
PHY_MODE_SPECIAL = 8,
|
|
};
|
|
|
|
static inline bool efx_phy_mode_disabled(enum efx_phy_mode mode)
|
|
{
|
|
return !!(mode & ~PHY_MODE_TX_DISABLED);
|
|
}
|
|
|
|
/*
|
|
* Efx extended statistics
|
|
*
|
|
* Not all statistics are provided by all supported MACs. The purpose
|
|
* is this structure is to contain the raw statistics provided by each
|
|
* MAC.
|
|
*/
|
|
struct efx_mac_stats {
|
|
u64 tx_bytes;
|
|
u64 tx_good_bytes;
|
|
u64 tx_bad_bytes;
|
|
unsigned long tx_packets;
|
|
unsigned long tx_bad;
|
|
unsigned long tx_pause;
|
|
unsigned long tx_control;
|
|
unsigned long tx_unicast;
|
|
unsigned long tx_multicast;
|
|
unsigned long tx_broadcast;
|
|
unsigned long tx_lt64;
|
|
unsigned long tx_64;
|
|
unsigned long tx_65_to_127;
|
|
unsigned long tx_128_to_255;
|
|
unsigned long tx_256_to_511;
|
|
unsigned long tx_512_to_1023;
|
|
unsigned long tx_1024_to_15xx;
|
|
unsigned long tx_15xx_to_jumbo;
|
|
unsigned long tx_gtjumbo;
|
|
unsigned long tx_collision;
|
|
unsigned long tx_single_collision;
|
|
unsigned long tx_multiple_collision;
|
|
unsigned long tx_excessive_collision;
|
|
unsigned long tx_deferred;
|
|
unsigned long tx_late_collision;
|
|
unsigned long tx_excessive_deferred;
|
|
unsigned long tx_non_tcpudp;
|
|
unsigned long tx_mac_src_error;
|
|
unsigned long tx_ip_src_error;
|
|
u64 rx_bytes;
|
|
u64 rx_good_bytes;
|
|
u64 rx_bad_bytes;
|
|
unsigned long rx_packets;
|
|
unsigned long rx_good;
|
|
unsigned long rx_bad;
|
|
unsigned long rx_pause;
|
|
unsigned long rx_control;
|
|
unsigned long rx_unicast;
|
|
unsigned long rx_multicast;
|
|
unsigned long rx_broadcast;
|
|
unsigned long rx_lt64;
|
|
unsigned long rx_64;
|
|
unsigned long rx_65_to_127;
|
|
unsigned long rx_128_to_255;
|
|
unsigned long rx_256_to_511;
|
|
unsigned long rx_512_to_1023;
|
|
unsigned long rx_1024_to_15xx;
|
|
unsigned long rx_15xx_to_jumbo;
|
|
unsigned long rx_gtjumbo;
|
|
unsigned long rx_bad_lt64;
|
|
unsigned long rx_bad_64_to_15xx;
|
|
unsigned long rx_bad_15xx_to_jumbo;
|
|
unsigned long rx_bad_gtjumbo;
|
|
unsigned long rx_overflow;
|
|
unsigned long rx_missed;
|
|
unsigned long rx_false_carrier;
|
|
unsigned long rx_symbol_error;
|
|
unsigned long rx_align_error;
|
|
unsigned long rx_length_error;
|
|
unsigned long rx_internal_error;
|
|
unsigned long rx_good_lt64;
|
|
};
|
|
|
|
/* Number of bits used in a multicast filter hash address */
|
|
#define EFX_MCAST_HASH_BITS 8
|
|
|
|
/* Number of (single-bit) entries in a multicast filter hash */
|
|
#define EFX_MCAST_HASH_ENTRIES (1 << EFX_MCAST_HASH_BITS)
|
|
|
|
/* An Efx multicast filter hash */
|
|
union efx_multicast_hash {
|
|
u8 byte[EFX_MCAST_HASH_ENTRIES / 8];
|
|
efx_oword_t oword[EFX_MCAST_HASH_ENTRIES / sizeof(efx_oword_t) / 8];
|
|
};
|
|
|
|
/**
|
|
* struct efx_nic - an Efx NIC
|
|
* @name: Device name (net device name or bus id before net device registered)
|
|
* @pci_dev: The PCI device
|
|
* @type: Controller type attributes
|
|
* @legacy_irq: IRQ number
|
|
* @workqueue: Workqueue for port reconfigures and the HW monitor.
|
|
* Work items do not hold and must not acquire RTNL.
|
|
* @workqueue_name: Name of workqueue
|
|
* @reset_work: Scheduled reset workitem
|
|
* @monitor_work: Hardware monitor workitem
|
|
* @membase_phys: Memory BAR value as physical address
|
|
* @membase: Memory BAR value
|
|
* @biu_lock: BIU (bus interface unit) lock
|
|
* @interrupt_mode: Interrupt mode
|
|
* @irq_rx_adaptive: Adaptive IRQ moderation enabled for RX event queues
|
|
* @irq_rx_moderation: IRQ moderation time for RX event queues
|
|
* @state: Device state flag. Serialised by the rtnl_lock.
|
|
* @reset_pending: Pending reset method (normally RESET_TYPE_NONE)
|
|
* @tx_queue: TX DMA queues
|
|
* @rx_queue: RX DMA queues
|
|
* @channel: Channels
|
|
* @next_buffer_table: First available buffer table id
|
|
* @n_rx_queues: Number of RX queues
|
|
* @n_channels: Number of channels in use
|
|
* @rx_buffer_len: RX buffer length
|
|
* @rx_buffer_order: Order (log2) of number of pages for each RX buffer
|
|
* @int_error_count: Number of internal errors seen recently
|
|
* @int_error_expire: Time at which error count will be expired
|
|
* @irq_status: Interrupt status buffer
|
|
* @last_irq_cpu: Last CPU to handle interrupt.
|
|
* This register is written with the SMP processor ID whenever an
|
|
* interrupt is handled. It is used by falcon_test_interrupt()
|
|
* to verify that an interrupt has occurred.
|
|
* @spi_flash: SPI flash device
|
|
* This field will be %NULL if no flash device is present (or for Siena).
|
|
* @spi_eeprom: SPI EEPROM device
|
|
* This field will be %NULL if no EEPROM device is present (or for Siena).
|
|
* @spi_lock: SPI bus lock
|
|
* @mtd_list: List of MTDs attached to the NIC
|
|
* @n_rx_nodesc_drop_cnt: RX no descriptor drop count
|
|
* @nic_data: Hardware dependant state
|
|
* @mac_lock: MAC access lock. Protects @port_enabled, @phy_mode,
|
|
* @port_inhibited, efx_monitor() and efx_reconfigure_port()
|
|
* @port_enabled: Port enabled indicator.
|
|
* Serialises efx_stop_all(), efx_start_all(), efx_monitor() and
|
|
* efx_mac_work() with kernel interfaces. Safe to read under any
|
|
* one of the rtnl_lock, mac_lock, or netif_tx_lock, but all three must
|
|
* be held to modify it.
|
|
* @port_inhibited: If set, the netif_carrier is always off. Hold the mac_lock
|
|
* @port_initialized: Port initialized?
|
|
* @net_dev: Operating system network device. Consider holding the rtnl lock
|
|
* @rx_checksum_enabled: RX checksumming enabled
|
|
* @netif_stop_count: Port stop count
|
|
* @netif_stop_lock: Port stop lock
|
|
* @mac_stats: MAC statistics. These include all statistics the MACs
|
|
* can provide. Generic code converts these into a standard
|
|
* &struct net_device_stats.
|
|
* @stats_buffer: DMA buffer for statistics
|
|
* @stats_lock: Statistics update lock. Serialises statistics fetches
|
|
* @mac_op: MAC interface
|
|
* @mac_address: Permanent MAC address
|
|
* @phy_type: PHY type
|
|
* @mdio_lock: MDIO lock
|
|
* @phy_op: PHY interface
|
|
* @phy_data: PHY private data (including PHY-specific stats)
|
|
* @mdio: PHY MDIO interface
|
|
* @mdio_bus: PHY MDIO bus ID (only used by Siena)
|
|
* @phy_mode: PHY operating mode. Serialised by @mac_lock.
|
|
* @xmac_poll_required: XMAC link state needs polling
|
|
* @link_advertising: Autonegotiation advertising flags
|
|
* @link_state: Current state of the link
|
|
* @n_link_state_changes: Number of times the link has changed state
|
|
* @promiscuous: Promiscuous flag. Protected by netif_tx_lock.
|
|
* @multicast_hash: Multicast hash table
|
|
* @wanted_fc: Wanted flow control flags
|
|
* @mac_work: Work item for changing MAC promiscuity and multicast hash
|
|
* @loopback_mode: Loopback status
|
|
* @loopback_modes: Supported loopback mode bitmask
|
|
* @loopback_selftest: Offline self-test private state
|
|
*
|
|
* The @priv field of the corresponding &struct net_device points to
|
|
* this.
|
|
*/
|
|
struct efx_nic {
|
|
char name[IFNAMSIZ];
|
|
struct pci_dev *pci_dev;
|
|
const struct efx_nic_type *type;
|
|
int legacy_irq;
|
|
struct workqueue_struct *workqueue;
|
|
char workqueue_name[16];
|
|
struct work_struct reset_work;
|
|
struct delayed_work monitor_work;
|
|
resource_size_t membase_phys;
|
|
void __iomem *membase;
|
|
spinlock_t biu_lock;
|
|
enum efx_int_mode interrupt_mode;
|
|
bool irq_rx_adaptive;
|
|
unsigned int irq_rx_moderation;
|
|
|
|
enum nic_state state;
|
|
enum reset_type reset_pending;
|
|
|
|
struct efx_tx_queue tx_queue[EFX_TX_QUEUE_COUNT];
|
|
struct efx_rx_queue rx_queue[EFX_MAX_RX_QUEUES];
|
|
struct efx_channel channel[EFX_MAX_CHANNELS];
|
|
|
|
unsigned next_buffer_table;
|
|
int n_rx_queues;
|
|
int n_channels;
|
|
unsigned int rx_buffer_len;
|
|
unsigned int rx_buffer_order;
|
|
|
|
unsigned int_error_count;
|
|
unsigned long int_error_expire;
|
|
|
|
struct efx_buffer irq_status;
|
|
volatile signed int last_irq_cpu;
|
|
unsigned long irq_zero_count;
|
|
|
|
struct efx_spi_device *spi_flash;
|
|
struct efx_spi_device *spi_eeprom;
|
|
struct mutex spi_lock;
|
|
#ifdef CONFIG_SFC_MTD
|
|
struct list_head mtd_list;
|
|
#endif
|
|
|
|
unsigned n_rx_nodesc_drop_cnt;
|
|
|
|
void *nic_data;
|
|
|
|
struct mutex mac_lock;
|
|
struct work_struct mac_work;
|
|
bool port_enabled;
|
|
bool port_inhibited;
|
|
|
|
bool port_initialized;
|
|
struct net_device *net_dev;
|
|
bool rx_checksum_enabled;
|
|
|
|
atomic_t netif_stop_count;
|
|
spinlock_t netif_stop_lock;
|
|
|
|
struct efx_mac_stats mac_stats;
|
|
struct efx_buffer stats_buffer;
|
|
spinlock_t stats_lock;
|
|
|
|
struct efx_mac_operations *mac_op;
|
|
unsigned char mac_address[ETH_ALEN];
|
|
|
|
unsigned int phy_type;
|
|
struct mutex mdio_lock;
|
|
struct efx_phy_operations *phy_op;
|
|
void *phy_data;
|
|
struct mdio_if_info mdio;
|
|
unsigned int mdio_bus;
|
|
enum efx_phy_mode phy_mode;
|
|
|
|
bool xmac_poll_required;
|
|
u32 link_advertising;
|
|
struct efx_link_state link_state;
|
|
unsigned int n_link_state_changes;
|
|
|
|
bool promiscuous;
|
|
union efx_multicast_hash multicast_hash;
|
|
enum efx_fc_type wanted_fc;
|
|
|
|
atomic_t rx_reset;
|
|
enum efx_loopback_mode loopback_mode;
|
|
u64 loopback_modes;
|
|
|
|
void *loopback_selftest;
|
|
};
|
|
|
|
static inline int efx_dev_registered(struct efx_nic *efx)
|
|
{
|
|
return efx->net_dev->reg_state == NETREG_REGISTERED;
|
|
}
|
|
|
|
/* Net device name, for inclusion in log messages if it has been registered.
|
|
* Use efx->name not efx->net_dev->name so that races with (un)registration
|
|
* are harmless.
|
|
*/
|
|
static inline const char *efx_dev_name(struct efx_nic *efx)
|
|
{
|
|
return efx_dev_registered(efx) ? efx->name : "";
|
|
}
|
|
|
|
static inline unsigned int efx_port_num(struct efx_nic *efx)
|
|
{
|
|
return PCI_FUNC(efx->pci_dev->devfn);
|
|
}
|
|
|
|
/**
|
|
* struct efx_nic_type - Efx device type definition
|
|
* @probe: Probe the controller
|
|
* @remove: Free resources allocated by probe()
|
|
* @init: Initialise the controller
|
|
* @fini: Shut down the controller
|
|
* @monitor: Periodic function for polling link state and hardware monitor
|
|
* @reset: Reset the controller hardware and possibly the PHY. This will
|
|
* be called while the controller is uninitialised.
|
|
* @probe_port: Probe the MAC and PHY
|
|
* @remove_port: Free resources allocated by probe_port()
|
|
* @prepare_flush: Prepare the hardware for flushing the DMA queues
|
|
* @update_stats: Update statistics not provided by event handling
|
|
* @start_stats: Start the regular fetching of statistics
|
|
* @stop_stats: Stop the regular fetching of statistics
|
|
* @set_id_led: Set state of identifying LED or revert to automatic function
|
|
* @push_irq_moderation: Apply interrupt moderation value
|
|
* @push_multicast_hash: Apply multicast hash table
|
|
* @reconfigure_port: Push loopback/power/txdis changes to the MAC and PHY
|
|
* @get_wol: Get WoL configuration from driver state
|
|
* @set_wol: Push WoL configuration to the NIC
|
|
* @resume_wol: Synchronise WoL state between driver and MC (e.g. after resume)
|
|
* @test_registers: Test read/write functionality of control registers
|
|
* @test_nvram: Test validity of NVRAM contents
|
|
* @default_mac_ops: efx_mac_operations to set at startup
|
|
* @revision: Hardware architecture revision
|
|
* @mem_map_size: Memory BAR mapped size
|
|
* @txd_ptr_tbl_base: TX descriptor ring base address
|
|
* @rxd_ptr_tbl_base: RX descriptor ring base address
|
|
* @buf_tbl_base: Buffer table base address
|
|
* @evq_ptr_tbl_base: Event queue pointer table base address
|
|
* @evq_rptr_tbl_base: Event queue read-pointer table base address
|
|
* @max_dma_mask: Maximum possible DMA mask
|
|
* @rx_buffer_padding: Padding added to each RX buffer
|
|
* @max_interrupt_mode: Highest capability interrupt mode supported
|
|
* from &enum efx_init_mode.
|
|
* @phys_addr_channels: Number of channels with physically addressed
|
|
* descriptors
|
|
* @tx_dc_base: Base address in SRAM of TX queue descriptor caches
|
|
* @rx_dc_base: Base address in SRAM of RX queue descriptor caches
|
|
* @offload_features: net_device feature flags for protocol offload
|
|
* features implemented in hardware
|
|
* @reset_world_flags: Flags for additional components covered by
|
|
* reset method RESET_TYPE_WORLD
|
|
*/
|
|
struct efx_nic_type {
|
|
int (*probe)(struct efx_nic *efx);
|
|
void (*remove)(struct efx_nic *efx);
|
|
int (*init)(struct efx_nic *efx);
|
|
void (*fini)(struct efx_nic *efx);
|
|
void (*monitor)(struct efx_nic *efx);
|
|
int (*reset)(struct efx_nic *efx, enum reset_type method);
|
|
int (*probe_port)(struct efx_nic *efx);
|
|
void (*remove_port)(struct efx_nic *efx);
|
|
void (*prepare_flush)(struct efx_nic *efx);
|
|
void (*update_stats)(struct efx_nic *efx);
|
|
void (*start_stats)(struct efx_nic *efx);
|
|
void (*stop_stats)(struct efx_nic *efx);
|
|
void (*set_id_led)(struct efx_nic *efx, enum efx_led_mode mode);
|
|
void (*push_irq_moderation)(struct efx_channel *channel);
|
|
void (*push_multicast_hash)(struct efx_nic *efx);
|
|
int (*reconfigure_port)(struct efx_nic *efx);
|
|
void (*get_wol)(struct efx_nic *efx, struct ethtool_wolinfo *wol);
|
|
int (*set_wol)(struct efx_nic *efx, u32 type);
|
|
void (*resume_wol)(struct efx_nic *efx);
|
|
int (*test_registers)(struct efx_nic *efx);
|
|
int (*test_nvram)(struct efx_nic *efx);
|
|
struct efx_mac_operations *default_mac_ops;
|
|
|
|
int revision;
|
|
unsigned int mem_map_size;
|
|
unsigned int txd_ptr_tbl_base;
|
|
unsigned int rxd_ptr_tbl_base;
|
|
unsigned int buf_tbl_base;
|
|
unsigned int evq_ptr_tbl_base;
|
|
unsigned int evq_rptr_tbl_base;
|
|
u64 max_dma_mask;
|
|
unsigned int rx_buffer_padding;
|
|
unsigned int max_interrupt_mode;
|
|
unsigned int phys_addr_channels;
|
|
unsigned int tx_dc_base;
|
|
unsigned int rx_dc_base;
|
|
unsigned long offload_features;
|
|
u32 reset_world_flags;
|
|
};
|
|
|
|
/**************************************************************************
|
|
*
|
|
* Prototypes and inline functions
|
|
*
|
|
*************************************************************************/
|
|
|
|
/* Iterate over all used channels */
|
|
#define efx_for_each_channel(_channel, _efx) \
|
|
for (_channel = &_efx->channel[0]; \
|
|
_channel < &_efx->channel[EFX_MAX_CHANNELS]; \
|
|
_channel++) \
|
|
if (!_channel->used_flags) \
|
|
continue; \
|
|
else
|
|
|
|
/* Iterate over all used TX queues */
|
|
#define efx_for_each_tx_queue(_tx_queue, _efx) \
|
|
for (_tx_queue = &_efx->tx_queue[0]; \
|
|
_tx_queue < &_efx->tx_queue[EFX_TX_QUEUE_COUNT]; \
|
|
_tx_queue++)
|
|
|
|
/* Iterate over all TX queues belonging to a channel */
|
|
#define efx_for_each_channel_tx_queue(_tx_queue, _channel) \
|
|
for (_tx_queue = &_channel->efx->tx_queue[0]; \
|
|
_tx_queue < &_channel->efx->tx_queue[EFX_TX_QUEUE_COUNT]; \
|
|
_tx_queue++) \
|
|
if (_tx_queue->channel != _channel) \
|
|
continue; \
|
|
else
|
|
|
|
/* Iterate over all used RX queues */
|
|
#define efx_for_each_rx_queue(_rx_queue, _efx) \
|
|
for (_rx_queue = &_efx->rx_queue[0]; \
|
|
_rx_queue < &_efx->rx_queue[_efx->n_rx_queues]; \
|
|
_rx_queue++)
|
|
|
|
/* Iterate over all RX queues belonging to a channel */
|
|
#define efx_for_each_channel_rx_queue(_rx_queue, _channel) \
|
|
for (_rx_queue = &_channel->efx->rx_queue[_channel->channel]; \
|
|
_rx_queue; \
|
|
_rx_queue = NULL) \
|
|
if (_rx_queue->channel != _channel) \
|
|
continue; \
|
|
else
|
|
|
|
/* Returns a pointer to the specified receive buffer in the RX
|
|
* descriptor queue.
|
|
*/
|
|
static inline struct efx_rx_buffer *efx_rx_buffer(struct efx_rx_queue *rx_queue,
|
|
unsigned int index)
|
|
{
|
|
return (&rx_queue->buffer[index]);
|
|
}
|
|
|
|
/* Set bit in a little-endian bitfield */
|
|
static inline void set_bit_le(unsigned nr, unsigned char *addr)
|
|
{
|
|
addr[nr / 8] |= (1 << (nr % 8));
|
|
}
|
|
|
|
/* Clear bit in a little-endian bitfield */
|
|
static inline void clear_bit_le(unsigned nr, unsigned char *addr)
|
|
{
|
|
addr[nr / 8] &= ~(1 << (nr % 8));
|
|
}
|
|
|
|
|
|
/**
|
|
* EFX_MAX_FRAME_LEN - calculate maximum frame length
|
|
*
|
|
* This calculates the maximum frame length that will be used for a
|
|
* given MTU. The frame length will be equal to the MTU plus a
|
|
* constant amount of header space and padding. This is the quantity
|
|
* that the net driver will program into the MAC as the maximum frame
|
|
* length.
|
|
*
|
|
* The 10G MAC used in Falcon requires 8-byte alignment on the frame
|
|
* length, so we round up to the nearest 8.
|
|
*
|
|
* Re-clocking by the XGXS on RX can reduce an IPG to 32 bits (half an
|
|
* XGMII cycle). If the frame length reaches the maximum value in the
|
|
* same cycle, the XMAC can miss the IPG altogether. We work around
|
|
* this by adding a further 16 bytes.
|
|
*/
|
|
#define EFX_MAX_FRAME_LEN(mtu) \
|
|
((((mtu) + ETH_HLEN + VLAN_HLEN + 4/* FCS */ + 7) & ~7) + 16)
|
|
|
|
|
|
#endif /* EFX_NET_DRIVER_H */
|