42bb8cc5e8
Intel "Smackover" x58 BIOS don't have HPET enabled in the BIOS, so allow to force enable it at least. The register layout is the same as in other recent ICHs, so all the code can be reused. Using numerical PCI-ID because it's unlikely the PCI-ID will be used anywhere else. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
499 lines
13 KiB
C
499 lines
13 KiB
C
/*
|
|
* This file contains work-arounds for x86 and x86_64 platform bugs.
|
|
*/
|
|
#include <linux/pci.h>
|
|
#include <linux/irq.h>
|
|
|
|
#include <asm/hpet.h>
|
|
|
|
#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI)
|
|
|
|
static void __devinit quirk_intel_irqbalance(struct pci_dev *dev)
|
|
{
|
|
u8 config, rev;
|
|
u16 word;
|
|
|
|
/* BIOS may enable hardware IRQ balancing for
|
|
* E7520/E7320/E7525(revision ID 0x9 and below)
|
|
* based platforms.
|
|
* Disable SW irqbalance/affinity on those platforms.
|
|
*/
|
|
pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev);
|
|
if (rev > 0x9)
|
|
return;
|
|
|
|
/* enable access to config space*/
|
|
pci_read_config_byte(dev, 0xf4, &config);
|
|
pci_write_config_byte(dev, 0xf4, config|0x2);
|
|
|
|
/*
|
|
* read xTPR register. We may not have a pci_dev for device 8
|
|
* because it might be hidden until the above write.
|
|
*/
|
|
pci_bus_read_config_word(dev->bus, PCI_DEVFN(8, 0), 0x4c, &word);
|
|
|
|
if (!(word & (1 << 13))) {
|
|
dev_info(&dev->dev, "Intel E7520/7320/7525 detected; "
|
|
"disabling irq balancing and affinity\n");
|
|
noirqdebug_setup("");
|
|
#ifdef CONFIG_PROC_FS
|
|
no_irq_affinity = 1;
|
|
#endif
|
|
}
|
|
|
|
/* put back the original value for config space*/
|
|
if (!(config & 0x2))
|
|
pci_write_config_byte(dev, 0xf4, config);
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH,
|
|
quirk_intel_irqbalance);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH,
|
|
quirk_intel_irqbalance);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH,
|
|
quirk_intel_irqbalance);
|
|
#endif
|
|
|
|
#if defined(CONFIG_HPET_TIMER)
|
|
unsigned long force_hpet_address;
|
|
|
|
static enum {
|
|
NONE_FORCE_HPET_RESUME,
|
|
OLD_ICH_FORCE_HPET_RESUME,
|
|
ICH_FORCE_HPET_RESUME,
|
|
VT8237_FORCE_HPET_RESUME,
|
|
NVIDIA_FORCE_HPET_RESUME,
|
|
ATI_FORCE_HPET_RESUME,
|
|
} force_hpet_resume_type;
|
|
|
|
static void __iomem *rcba_base;
|
|
|
|
static void ich_force_hpet_resume(void)
|
|
{
|
|
u32 val;
|
|
|
|
if (!force_hpet_address)
|
|
return;
|
|
|
|
if (rcba_base == NULL)
|
|
BUG();
|
|
|
|
/* read the Function Disable register, dword mode only */
|
|
val = readl(rcba_base + 0x3404);
|
|
if (!(val & 0x80)) {
|
|
/* HPET disabled in HPTC. Trying to enable */
|
|
writel(val | 0x80, rcba_base + 0x3404);
|
|
}
|
|
|
|
val = readl(rcba_base + 0x3404);
|
|
if (!(val & 0x80))
|
|
BUG();
|
|
else
|
|
printk(KERN_DEBUG "Force enabled HPET at resume\n");
|
|
|
|
return;
|
|
}
|
|
|
|
static void ich_force_enable_hpet(struct pci_dev *dev)
|
|
{
|
|
u32 val;
|
|
u32 uninitialized_var(rcba);
|
|
int err = 0;
|
|
|
|
if (hpet_address || force_hpet_address)
|
|
return;
|
|
|
|
pci_read_config_dword(dev, 0xF0, &rcba);
|
|
rcba &= 0xFFFFC000;
|
|
if (rcba == 0) {
|
|
dev_printk(KERN_DEBUG, &dev->dev, "RCBA disabled; "
|
|
"cannot force enable HPET\n");
|
|
return;
|
|
}
|
|
|
|
/* use bits 31:14, 16 kB aligned */
|
|
rcba_base = ioremap_nocache(rcba, 0x4000);
|
|
if (rcba_base == NULL) {
|
|
dev_printk(KERN_DEBUG, &dev->dev, "ioremap failed; "
|
|
"cannot force enable HPET\n");
|
|
return;
|
|
}
|
|
|
|
/* read the Function Disable register, dword mode only */
|
|
val = readl(rcba_base + 0x3404);
|
|
|
|
if (val & 0x80) {
|
|
/* HPET is enabled in HPTC. Just not reported by BIOS */
|
|
val = val & 0x3;
|
|
force_hpet_address = 0xFED00000 | (val << 12);
|
|
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
|
|
"0x%lx\n", force_hpet_address);
|
|
iounmap(rcba_base);
|
|
return;
|
|
}
|
|
|
|
/* HPET disabled in HPTC. Trying to enable */
|
|
writel(val | 0x80, rcba_base + 0x3404);
|
|
|
|
val = readl(rcba_base + 0x3404);
|
|
if (!(val & 0x80)) {
|
|
err = 1;
|
|
} else {
|
|
val = val & 0x3;
|
|
force_hpet_address = 0xFED00000 | (val << 12);
|
|
}
|
|
|
|
if (err) {
|
|
force_hpet_address = 0;
|
|
iounmap(rcba_base);
|
|
dev_printk(KERN_DEBUG, &dev->dev,
|
|
"Failed to force enable HPET\n");
|
|
} else {
|
|
force_hpet_resume_type = ICH_FORCE_HPET_RESUME;
|
|
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
|
|
"0x%lx\n", force_hpet_address);
|
|
}
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0,
|
|
ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0,
|
|
ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1,
|
|
ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0,
|
|
ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1,
|
|
ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31,
|
|
ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1,
|
|
ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4,
|
|
ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7,
|
|
ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x3a16, /* ICH10 */
|
|
ich_force_enable_hpet);
|
|
|
|
static struct pci_dev *cached_dev;
|
|
|
|
static void hpet_print_force_info(void)
|
|
{
|
|
printk(KERN_INFO "HPET not enabled in BIOS. "
|
|
"You might try hpet=force boot option\n");
|
|
}
|
|
|
|
static void old_ich_force_hpet_resume(void)
|
|
{
|
|
u32 val;
|
|
u32 uninitialized_var(gen_cntl);
|
|
|
|
if (!force_hpet_address || !cached_dev)
|
|
return;
|
|
|
|
pci_read_config_dword(cached_dev, 0xD0, &gen_cntl);
|
|
gen_cntl &= (~(0x7 << 15));
|
|
gen_cntl |= (0x4 << 15);
|
|
|
|
pci_write_config_dword(cached_dev, 0xD0, gen_cntl);
|
|
pci_read_config_dword(cached_dev, 0xD0, &gen_cntl);
|
|
val = gen_cntl >> 15;
|
|
val &= 0x7;
|
|
if (val == 0x4)
|
|
printk(KERN_DEBUG "Force enabled HPET at resume\n");
|
|
else
|
|
BUG();
|
|
}
|
|
|
|
static void old_ich_force_enable_hpet(struct pci_dev *dev)
|
|
{
|
|
u32 val;
|
|
u32 uninitialized_var(gen_cntl);
|
|
|
|
if (hpet_address || force_hpet_address)
|
|
return;
|
|
|
|
pci_read_config_dword(dev, 0xD0, &gen_cntl);
|
|
/*
|
|
* Bit 17 is HPET enable bit.
|
|
* Bit 16:15 control the HPET base address.
|
|
*/
|
|
val = gen_cntl >> 15;
|
|
val &= 0x7;
|
|
if (val & 0x4) {
|
|
val &= 0x3;
|
|
force_hpet_address = 0xFED00000 | (val << 12);
|
|
dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n",
|
|
force_hpet_address);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* HPET is disabled. Trying enabling at FED00000 and check
|
|
* whether it sticks
|
|
*/
|
|
gen_cntl &= (~(0x7 << 15));
|
|
gen_cntl |= (0x4 << 15);
|
|
pci_write_config_dword(dev, 0xD0, gen_cntl);
|
|
|
|
pci_read_config_dword(dev, 0xD0, &gen_cntl);
|
|
|
|
val = gen_cntl >> 15;
|
|
val &= 0x7;
|
|
if (val & 0x4) {
|
|
/* HPET is enabled in HPTC. Just not reported by BIOS */
|
|
val &= 0x3;
|
|
force_hpet_address = 0xFED00000 | (val << 12);
|
|
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
|
|
"0x%lx\n", force_hpet_address);
|
|
cached_dev = dev;
|
|
force_hpet_resume_type = OLD_ICH_FORCE_HPET_RESUME;
|
|
return;
|
|
}
|
|
|
|
dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n");
|
|
}
|
|
|
|
/*
|
|
* Undocumented chipset features. Make sure that the user enforced
|
|
* this.
|
|
*/
|
|
static void old_ich_force_enable_hpet_user(struct pci_dev *dev)
|
|
{
|
|
if (hpet_force_user)
|
|
old_ich_force_enable_hpet(dev);
|
|
else
|
|
hpet_print_force_info();
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,
|
|
old_ich_force_enable_hpet_user);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0,
|
|
old_ich_force_enable_hpet_user);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12,
|
|
old_ich_force_enable_hpet_user);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0,
|
|
old_ich_force_enable_hpet_user);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12,
|
|
old_ich_force_enable_hpet_user);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,
|
|
old_ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_12,
|
|
old_ich_force_enable_hpet);
|
|
|
|
|
|
static void vt8237_force_hpet_resume(void)
|
|
{
|
|
u32 val;
|
|
|
|
if (!force_hpet_address || !cached_dev)
|
|
return;
|
|
|
|
val = 0xfed00000 | 0x80;
|
|
pci_write_config_dword(cached_dev, 0x68, val);
|
|
|
|
pci_read_config_dword(cached_dev, 0x68, &val);
|
|
if (val & 0x80)
|
|
printk(KERN_DEBUG "Force enabled HPET at resume\n");
|
|
else
|
|
BUG();
|
|
}
|
|
|
|
static void vt8237_force_enable_hpet(struct pci_dev *dev)
|
|
{
|
|
u32 uninitialized_var(val);
|
|
|
|
if (hpet_address || force_hpet_address)
|
|
return;
|
|
|
|
if (!hpet_force_user) {
|
|
hpet_print_force_info();
|
|
return;
|
|
}
|
|
|
|
pci_read_config_dword(dev, 0x68, &val);
|
|
/*
|
|
* Bit 7 is HPET enable bit.
|
|
* Bit 31:10 is HPET base address (contrary to what datasheet claims)
|
|
*/
|
|
if (val & 0x80) {
|
|
force_hpet_address = (val & ~0x3ff);
|
|
dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n",
|
|
force_hpet_address);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* HPET is disabled. Trying enabling at FED00000 and check
|
|
* whether it sticks
|
|
*/
|
|
val = 0xfed00000 | 0x80;
|
|
pci_write_config_dword(dev, 0x68, val);
|
|
|
|
pci_read_config_dword(dev, 0x68, &val);
|
|
if (val & 0x80) {
|
|
force_hpet_address = (val & ~0x3ff);
|
|
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
|
|
"0x%lx\n", force_hpet_address);
|
|
cached_dev = dev;
|
|
force_hpet_resume_type = VT8237_FORCE_HPET_RESUME;
|
|
return;
|
|
}
|
|
|
|
dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n");
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235,
|
|
vt8237_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237,
|
|
vt8237_force_enable_hpet);
|
|
|
|
static void ati_force_hpet_resume(void)
|
|
{
|
|
pci_write_config_dword(cached_dev, 0x14, 0xfed00000);
|
|
printk(KERN_DEBUG "Force enabled HPET at resume\n");
|
|
}
|
|
|
|
static u32 ati_ixp4x0_rev(struct pci_dev *dev)
|
|
{
|
|
u32 d;
|
|
u8 b;
|
|
|
|
pci_read_config_byte(dev, 0xac, &b);
|
|
b &= ~(1<<5);
|
|
pci_write_config_byte(dev, 0xac, b);
|
|
pci_read_config_dword(dev, 0x70, &d);
|
|
d |= 1<<8;
|
|
pci_write_config_dword(dev, 0x70, d);
|
|
pci_read_config_dword(dev, 0x8, &d);
|
|
d &= 0xff;
|
|
dev_printk(KERN_DEBUG, &dev->dev, "SB4X0 revision 0x%x\n", d);
|
|
return d;
|
|
}
|
|
|
|
static void ati_force_enable_hpet(struct pci_dev *dev)
|
|
{
|
|
u32 d, val;
|
|
u8 b;
|
|
|
|
if (hpet_address || force_hpet_address)
|
|
return;
|
|
|
|
if (!hpet_force_user) {
|
|
hpet_print_force_info();
|
|
return;
|
|
}
|
|
|
|
d = ati_ixp4x0_rev(dev);
|
|
if (d < 0x82)
|
|
return;
|
|
|
|
/* base address */
|
|
pci_write_config_dword(dev, 0x14, 0xfed00000);
|
|
pci_read_config_dword(dev, 0x14, &val);
|
|
|
|
/* enable interrupt */
|
|
outb(0x72, 0xcd6); b = inb(0xcd7);
|
|
b |= 0x1;
|
|
outb(0x72, 0xcd6); outb(b, 0xcd7);
|
|
outb(0x72, 0xcd6); b = inb(0xcd7);
|
|
if (!(b & 0x1))
|
|
return;
|
|
pci_read_config_dword(dev, 0x64, &d);
|
|
d |= (1<<10);
|
|
pci_write_config_dword(dev, 0x64, d);
|
|
pci_read_config_dword(dev, 0x64, &d);
|
|
if (!(d & (1<<10)))
|
|
return;
|
|
|
|
force_hpet_address = val;
|
|
force_hpet_resume_type = ATI_FORCE_HPET_RESUME;
|
|
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n",
|
|
force_hpet_address);
|
|
cached_dev = dev;
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS,
|
|
ati_force_enable_hpet);
|
|
|
|
/*
|
|
* Undocumented chipset feature taken from LinuxBIOS.
|
|
*/
|
|
static void nvidia_force_hpet_resume(void)
|
|
{
|
|
pci_write_config_dword(cached_dev, 0x44, 0xfed00001);
|
|
printk(KERN_DEBUG "Force enabled HPET at resume\n");
|
|
}
|
|
|
|
static void nvidia_force_enable_hpet(struct pci_dev *dev)
|
|
{
|
|
u32 uninitialized_var(val);
|
|
|
|
if (hpet_address || force_hpet_address)
|
|
return;
|
|
|
|
if (!hpet_force_user) {
|
|
hpet_print_force_info();
|
|
return;
|
|
}
|
|
|
|
pci_write_config_dword(dev, 0x44, 0xfed00001);
|
|
pci_read_config_dword(dev, 0x44, &val);
|
|
force_hpet_address = val & 0xfffffffe;
|
|
force_hpet_resume_type = NVIDIA_FORCE_HPET_RESUME;
|
|
dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n",
|
|
force_hpet_address);
|
|
cached_dev = dev;
|
|
return;
|
|
}
|
|
|
|
/* ISA Bridges */
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0050,
|
|
nvidia_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0051,
|
|
nvidia_force_enable_hpet);
|
|
|
|
/* LPC bridges */
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0260,
|
|
nvidia_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0360,
|
|
nvidia_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0361,
|
|
nvidia_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0362,
|
|
nvidia_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0363,
|
|
nvidia_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0364,
|
|
nvidia_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0365,
|
|
nvidia_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0366,
|
|
nvidia_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0367,
|
|
nvidia_force_enable_hpet);
|
|
|
|
void force_hpet_resume(void)
|
|
{
|
|
switch (force_hpet_resume_type) {
|
|
case ICH_FORCE_HPET_RESUME:
|
|
ich_force_hpet_resume();
|
|
return;
|
|
case OLD_ICH_FORCE_HPET_RESUME:
|
|
old_ich_force_hpet_resume();
|
|
return;
|
|
case VT8237_FORCE_HPET_RESUME:
|
|
vt8237_force_hpet_resume();
|
|
return;
|
|
case NVIDIA_FORCE_HPET_RESUME:
|
|
nvidia_force_hpet_resume();
|
|
return;
|
|
case ATI_FORCE_HPET_RESUME:
|
|
ati_force_hpet_resume();
|
|
return;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
#endif
|