remarkable-linux/include/linux/irqchip/arm-gic.h
Sricharan R 006e983bbc DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs
In some socs the gic can be preceded by a crossbar IP which
routes the peripheral interrupts to the gic inputs. The peripheral
interrupts are associated with a fixed crossbar input line and the
crossbar routes that to one of the free gic input line.

The DT entries for peripherals provides the fixed crossbar input line
as its interrupt number and the mapping code should associate this with
a free gic input line. This patch adds the support inside the gic irqchip
to handle such routable irqs. The routable irqs are registered in a linear
domain. The registered routable domain's callback should be implemented
to get a free irq and to configure the IP to route it.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Sricharan R <r.sricharan@ti.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-05 20:08:00 +05:30

104 lines
3.1 KiB
C

/*
* include/linux/irqchip/arm-gic.h
*
* Copyright (C) 2002 ARM Limited, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __LINUX_IRQCHIP_ARM_GIC_H
#define __LINUX_IRQCHIP_ARM_GIC_H
#define GIC_CPU_CTRL 0x00
#define GIC_CPU_PRIMASK 0x04
#define GIC_CPU_BINPOINT 0x08
#define GIC_CPU_INTACK 0x0c
#define GIC_CPU_EOI 0x10
#define GIC_CPU_RUNNINGPRI 0x14
#define GIC_CPU_HIGHPRI 0x18
#define GIC_CPU_ALIAS_BINPOINT 0x1c
#define GIC_CPU_ACTIVEPRIO 0xd0
#define GIC_CPU_IDENT 0xfc
#define GIC_DIST_CTRL 0x000
#define GIC_DIST_CTR 0x004
#define GIC_DIST_IGROUP 0x080
#define GIC_DIST_ENABLE_SET 0x100
#define GIC_DIST_ENABLE_CLEAR 0x180
#define GIC_DIST_PENDING_SET 0x200
#define GIC_DIST_PENDING_CLEAR 0x280
#define GIC_DIST_ACTIVE_SET 0x300
#define GIC_DIST_ACTIVE_CLEAR 0x380
#define GIC_DIST_PRI 0x400
#define GIC_DIST_TARGET 0x800
#define GIC_DIST_CONFIG 0xc00
#define GIC_DIST_SOFTINT 0xf00
#define GIC_DIST_SGI_PENDING_CLEAR 0xf10
#define GIC_DIST_SGI_PENDING_SET 0xf20
#define GICH_HCR 0x0
#define GICH_VTR 0x4
#define GICH_VMCR 0x8
#define GICH_MISR 0x10
#define GICH_EISR0 0x20
#define GICH_EISR1 0x24
#define GICH_ELRSR0 0x30
#define GICH_ELRSR1 0x34
#define GICH_APR 0xf0
#define GICH_LR0 0x100
#define GICH_HCR_EN (1 << 0)
#define GICH_HCR_UIE (1 << 1)
#define GICH_LR_VIRTUALID (0x3ff << 0)
#define GICH_LR_PHYSID_CPUID_SHIFT (10)
#define GICH_LR_PHYSID_CPUID (7 << GICH_LR_PHYSID_CPUID_SHIFT)
#define GICH_LR_STATE (3 << 28)
#define GICH_LR_PENDING_BIT (1 << 28)
#define GICH_LR_ACTIVE_BIT (1 << 29)
#define GICH_LR_EOI (1 << 19)
#define GICH_VMCR_CTRL_SHIFT 0
#define GICH_VMCR_CTRL_MASK (0x21f << GICH_VMCR_CTRL_SHIFT)
#define GICH_VMCR_PRIMASK_SHIFT 27
#define GICH_VMCR_PRIMASK_MASK (0x1f << GICH_VMCR_PRIMASK_SHIFT)
#define GICH_VMCR_BINPOINT_SHIFT 21
#define GICH_VMCR_BINPOINT_MASK (0x7 << GICH_VMCR_BINPOINT_SHIFT)
#define GICH_VMCR_ALIAS_BINPOINT_SHIFT 18
#define GICH_VMCR_ALIAS_BINPOINT_MASK (0x7 << GICH_VMCR_ALIAS_BINPOINT_SHIFT)
#define GICH_MISR_EOI (1 << 0)
#define GICH_MISR_U (1 << 1)
#ifndef __ASSEMBLY__
struct device_node;
extern struct irq_chip gic_arch_extn;
void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *,
u32 offset, struct device_node *);
void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
void gic_cpu_if_down(void);
static inline void gic_init(unsigned int nr, int start,
void __iomem *dist , void __iomem *cpu)
{
gic_init_bases(nr, start, dist, cpu, 0, NULL);
}
void gic_send_sgi(unsigned int cpu_id, unsigned int irq);
int gic_get_cpu_id(unsigned int cpu);
void gic_migrate_target(unsigned int new_cpu_id);
unsigned long gic_get_sgir_physaddr(void);
extern const struct irq_domain_ops *gic_routable_irq_domain_ops;
static inline void __init register_routable_domain_ops
(const struct irq_domain_ops *ops)
{
gic_routable_irq_domain_ops = ops;
}
#endif /* __ASSEMBLY */
#endif