![Greg Ungerer](/assets/img/avatar_default.png)
The older simple ColdFire interrupt controller has no one-to-one mapping of interrupt numbers to bits in the interrupt mask register. Create a mapping array that each ColdFire CPU type can populate with its available interrupts and the bits that each use in the interrupt mask register. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
148 lines
3.9 KiB
C
148 lines
3.9 KiB
C
/***************************************************************************/
|
|
|
|
/*
|
|
* linux/arch/m68knommu/platform/5307/config.c
|
|
*
|
|
* Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
|
|
* Copyright (C) 2000, Lineo (www.lineo.com)
|
|
*/
|
|
|
|
/***************************************************************************/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/param.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/coldfire.h>
|
|
#include <asm/mcfsim.h>
|
|
#include <asm/mcfuart.h>
|
|
#include <asm/mcfwdebug.h>
|
|
|
|
/***************************************************************************/
|
|
|
|
/*
|
|
* Some platforms need software versions of the GPIO data registers.
|
|
*/
|
|
unsigned short ppdata;
|
|
unsigned char ledbank = 0xff;
|
|
|
|
/***************************************************************************/
|
|
|
|
static struct mcf_platform_uart m5307_uart_platform[] = {
|
|
{
|
|
.mapbase = MCF_MBAR + MCFUART_BASE1,
|
|
.irq = 73,
|
|
},
|
|
{
|
|
.mapbase = MCF_MBAR + MCFUART_BASE2,
|
|
.irq = 74,
|
|
},
|
|
{ },
|
|
};
|
|
|
|
static struct platform_device m5307_uart = {
|
|
.name = "mcfuart",
|
|
.id = 0,
|
|
.dev.platform_data = m5307_uart_platform,
|
|
};
|
|
|
|
static struct platform_device *m5307_devices[] __initdata = {
|
|
&m5307_uart,
|
|
};
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m5307_uart_init_line(int line, int irq)
|
|
{
|
|
if (line == 0) {
|
|
writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
|
|
writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
|
|
mcf_mapirq2imr(irq, MCFINTC_UART0);
|
|
} else if (line == 1) {
|
|
writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
|
|
writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
|
|
mcf_mapirq2imr(irq, MCFINTC_UART1);
|
|
}
|
|
}
|
|
|
|
static void __init m5307_uarts_init(void)
|
|
{
|
|
const int nrlines = ARRAY_SIZE(m5307_uart_platform);
|
|
int line;
|
|
|
|
for (line = 0; (line < nrlines); line++)
|
|
m5307_uart_init_line(line, m5307_uart_platform[line].irq);
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m5307_timers_init(void)
|
|
{
|
|
/* Timer1 is always used as system timer */
|
|
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
|
|
MCF_MBAR + MCFSIM_TIMER1ICR);
|
|
mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
|
|
|
|
#ifdef CONFIG_HIGHPROFILE
|
|
/* Timer2 is to be used as a high speed profile timer */
|
|
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
|
|
MCF_MBAR + MCFSIM_TIMER2ICR);
|
|
mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
|
|
#endif
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
void m5307_cpu_reset(void)
|
|
{
|
|
local_irq_disable();
|
|
/* Set watchdog to soft reset, and enabled */
|
|
__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
|
|
for (;;)
|
|
/* wait for watchdog to timeout */;
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
void __init config_BSP(char *commandp, int size)
|
|
{
|
|
#if defined(CONFIG_NETtel) || \
|
|
defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
|
|
/* Copy command line from FLASH to local buffer... */
|
|
memcpy(commandp, (char *) 0xf0004000, size);
|
|
commandp[size-1] = 0;
|
|
#endif
|
|
|
|
mach_reset = m5307_cpu_reset;
|
|
m5307_timers_init();
|
|
m5307_uarts_init();
|
|
|
|
/* Only support the external interrupts on their primary level */
|
|
mcf_mapirq2imr(25, MCFINTC_EINT1);
|
|
mcf_mapirq2imr(27, MCFINTC_EINT3);
|
|
mcf_mapirq2imr(29, MCFINTC_EINT5);
|
|
mcf_mapirq2imr(31, MCFINTC_EINT7);
|
|
|
|
#ifdef CONFIG_BDM_DISABLE
|
|
/*
|
|
* Disable the BDM clocking. This also turns off most of the rest of
|
|
* the BDM device. This is good for EMC reasons. This option is not
|
|
* incompatible with the memory protection option.
|
|
*/
|
|
wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
|
|
#endif
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static int __init init_BSP(void)
|
|
{
|
|
platform_add_devices(m5307_devices, ARRAY_SIZE(m5307_devices));
|
|
return 0;
|
|
}
|
|
|
|
arch_initcall(init_BSP);
|
|
|
|
/***************************************************************************/
|