1
0
Fork 0
remarkable-uboot/include/part.h

315 lines
11 KiB
C
Raw Normal View History

2002-03-08 14:31:05 -07:00
/*
* (C) Copyright 2000-2004
2002-03-08 14:31:05 -07:00
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
2002-03-08 14:31:05 -07:00
*/
#ifndef _PART_H
#define _PART_H
#include <ide.h>
#include <common.h>
2002-03-08 14:31:05 -07:00
struct blk_desc {
int if_type; /* type of the interface */
int dev; /* device number */
unsigned char part_type; /* partition type */
unsigned char target; /* target SCSI ID */
unsigned char lun; /* target LUN */
unsigned char hwpart; /* HW partition, e.g. for eMMC */
unsigned char type; /* device type */
unsigned char removable; /* removable device */
#ifdef CONFIG_LBA48
unsigned char lba48; /* device can use 48bit addr (ATA/ATAPI v7) */
#endif
lbaint_t lba; /* number of blocks */
unsigned long blksz; /* block size */
int log2blksz; /* for convenience: log2(blksz) */
char vendor [40+1]; /* IDE model, SCSI Vendor */
char product[20+1]; /* IDE Serial no, SCSI product */
char revision[8+1]; /* firmware revision */
unsigned long (*block_read)(struct blk_desc *block_dev,
lbaint_t start,
lbaint_t blkcnt,
void *buffer);
unsigned long (*block_write)(struct blk_desc *block_dev,
lbaint_t start,
lbaint_t blkcnt,
const void *buffer);
unsigned long (*block_erase)(struct blk_desc *block_dev,
lbaint_t start,
lbaint_t blkcnt);
void *priv; /* driver private struct pointer */
};
#define BLOCK_CNT(size, blk_desc) (PAD_COUNT(size, blk_desc->blksz))
#define PAD_TO_BLOCKSIZE(size, blk_desc) \
(PAD_SIZE(size, blk_desc->blksz))
#define LOG2(x) (((x & 0xaaaaaaaa) ? 1 : 0) + ((x & 0xcccccccc) ? 2 : 0) + \
((x & 0xf0f0f0f0) ? 4 : 0) + ((x & 0xff00ff00) ? 8 : 0) + \
((x & 0xffff0000) ? 16 : 0))
#define LOG2_INVALID(type) ((type)((sizeof(type)<<3)-1))
2002-03-08 14:31:05 -07:00
/* Interface types: */
#define IF_TYPE_UNKNOWN 0
#define IF_TYPE_IDE 1
2002-03-08 14:31:05 -07:00
#define IF_TYPE_SCSI 2
#define IF_TYPE_ATAPI 3
#define IF_TYPE_USB 4
#define IF_TYPE_DOC 5
#define IF_TYPE_MMC 6
#define IF_TYPE_SD 7
#define IF_TYPE_SATA 8
#define IF_TYPE_HOST 9
#define IF_TYPE_MAX 10 /* Max number of IF_TYPE_* supported */
2002-03-08 14:31:05 -07:00
/* Part types */
#define PART_TYPE_UNKNOWN 0x00
2002-03-08 14:31:05 -07:00
#define PART_TYPE_MAC 0x01
#define PART_TYPE_DOS 0x02
#define PART_TYPE_ISO 0x03
#define PART_TYPE_AMIGA 0x04
#define PART_TYPE_EFI 0x05
/*
* Type string for U-Boot bootable partitions
*/
#define BOOT_PART_TYPE "U-Boot" /* primary boot partition type */
#define BOOT_PART_COMP "PPCBoot" /* PPCBoot compatibility type */
2002-03-08 14:31:05 -07:00
/* device types */
#define DEV_TYPE_UNKNOWN 0xff /* not connected */
#define DEV_TYPE_HARDDISK 0x00 /* harddisk */
#define DEV_TYPE_TAPE 0x01 /* Tape */
#define DEV_TYPE_CDROM 0x05 /* CD-ROM */
#define DEV_TYPE_OPDISK 0x07 /* optical disk */
2002-03-08 14:31:05 -07:00
typedef struct disk_partition {
lbaint_t start; /* # of first block in partition */
lbaint_t size; /* number of blocks in partition */
2002-03-08 14:31:05 -07:00
ulong blksz; /* block size in bytes */
uchar name[32]; /* partition name */
uchar type[32]; /* string type description */
int bootable; /* Active/Bootable flag is set */
#ifdef CONFIG_PARTITION_UUIDS
char uuid[37]; /* filesystem UUID as string, if exists */
#endif
#ifdef CONFIG_PARTITION_TYPE_GUID
char type_guid[37]; /* type GUID as string, if exists */
#endif
2002-03-08 14:31:05 -07:00
} disk_partition_t;
/* Misc _get_dev functions */
#ifdef CONFIG_PARTITIONS
struct blk_desc *get_dev(const char *ifname, int dev);
struct blk_desc *ide_get_dev(int dev);
struct blk_desc *sata_get_dev(int dev);
struct blk_desc *scsi_get_dev(int dev);
struct blk_desc *usb_stor_get_dev(int dev);
struct blk_desc *mmc_get_dev(int dev);
int mmc_select_hwpart(int dev_num, int hwpart);
struct blk_desc *systemace_get_dev(int dev);
struct blk_desc *mg_disk_get_dev(int dev);
struct blk_desc *host_get_dev(int dev);
int host_get_dev_err(int dev, struct blk_desc **blk_devp);
2002-03-08 14:31:05 -07:00
/* disk/part.c */
int get_partition_info(struct blk_desc *dev_desc, int part,
disk_partition_t *info);
void print_part(struct blk_desc *dev_desc);
void init_part(struct blk_desc *dev_desc);
void dev_print(struct blk_desc *dev_desc);
int get_device(const char *ifname, const char *dev_str,
struct blk_desc **dev_desc);
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 03:50:57 -06:00
int get_device_and_partition(const char *ifname, const char *dev_part_str,
struct blk_desc **dev_desc,
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 03:50:57 -06:00
disk_partition_t *info, int allow_whole_dev);
#else
static inline struct blk_desc *get_dev(const char *ifname, int dev)
{ return NULL; }
static inline struct blk_desc *ide_get_dev(int dev) { return NULL; }
static inline struct blk_desc *sata_get_dev(int dev) { return NULL; }
static inline struct blk_desc *scsi_get_dev(int dev) { return NULL; }
static inline struct blk_desc *usb_stor_get_dev(int dev) { return NULL; }
static inline struct blk_desc *mmc_get_dev(int dev) { return NULL; }
static inline int mmc_select_hwpart(int dev_num, int hwpart) { return -1; }
static inline struct blk_desc *systemace_get_dev(int dev) { return NULL; }
static inline struct blk_desc *mg_disk_get_dev(int dev) { return NULL; }
static inline struct blk_desc *host_get_dev(int dev) { return NULL; }
2002-03-08 14:31:05 -07:00
static inline int get_partition_info(struct blk_desc *dev_desc, int part,
disk_partition_t *info) { return -1; }
static inline void print_part(struct blk_desc *dev_desc) {}
static inline void init_part(struct blk_desc *dev_desc) {}
static inline void dev_print(struct blk_desc *dev_desc) {}
static inline int get_device(const char *ifname, const char *dev_str,
struct blk_desc **dev_desc)
{ return -1; }
static inline int get_device_and_partition(const char *ifname,
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 03:50:57 -06:00
const char *dev_part_str,
struct blk_desc **dev_desc,
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 03:50:57 -06:00
disk_partition_t *info,
int allow_whole_dev)
{ *dev_desc = NULL; return -1; }
#endif
2002-03-08 14:31:05 -07:00
#ifdef CONFIG_MAC_PARTITION
/* disk/part_mac.c */
int get_partition_info_mac(struct blk_desc *dev_desc, int part,
disk_partition_t *info);
void print_part_mac(struct blk_desc *dev_desc);
int test_part_mac(struct blk_desc *dev_desc);
2002-03-08 14:31:05 -07:00
#endif
#ifdef CONFIG_DOS_PARTITION
/* disk/part_dos.c */
int get_partition_info_dos(struct blk_desc *dev_desc, int part,
disk_partition_t *info);
void print_part_dos(struct blk_desc *dev_desc);
int test_part_dos(struct blk_desc *dev_desc);
2002-03-08 14:31:05 -07:00
#endif
#ifdef CONFIG_ISO_PARTITION
/* disk/part_iso.c */
int get_partition_info_iso(struct blk_desc *dev_desc, int part,
disk_partition_t *info);
void print_part_iso(struct blk_desc *dev_desc);
int test_part_iso(struct blk_desc *dev_desc);
2002-03-08 14:31:05 -07:00
#endif
#ifdef CONFIG_AMIGA_PARTITION
/* disk/part_amiga.c */
int get_partition_info_amiga(struct blk_desc *dev_desc, int part,
disk_partition_t *info);
void print_part_amiga(struct blk_desc *dev_desc);
int test_part_amiga(struct blk_desc *dev_desc);
#endif
#ifdef CONFIG_EFI_PARTITION
#include <part_efi.h>
/* disk/part_efi.c */
int get_partition_info_efi(struct blk_desc *dev_desc, int part,
disk_partition_t *info);
/**
* get_partition_info_efi_by_name() - Find the specified GPT partition table entry
*
* @param dev_desc - block device descriptor
* @param gpt_name - the specified table entry name
* @param info - returns the disk partition info
*
* @return - '0' on match, '-1' on no match, otherwise error
*/
int get_partition_info_efi_by_name(struct blk_desc *dev_desc,
const char *name, disk_partition_t *info);
void print_part_efi(struct blk_desc *dev_desc);
int test_part_efi(struct blk_desc *dev_desc);
/**
* write_gpt_table() - Write the GUID Partition Table to disk
*
* @param dev_desc - block device descriptor
* @param gpt_h - pointer to GPT header representation
* @param gpt_e - pointer to GPT partition table entries
*
* @return - zero on success, otherwise error
*/
int write_gpt_table(struct blk_desc *dev_desc,
gpt_header *gpt_h, gpt_entry *gpt_e);
/**
* gpt_fill_pte(): Fill the GPT partition table entry
*
* @param gpt_h - GPT header representation
* @param gpt_e - GPT partition table entries
* @param partitions - list of partitions
* @param parts - number of partitions
*
* @return zero on success
*/
int gpt_fill_pte(gpt_header *gpt_h, gpt_entry *gpt_e,
disk_partition_t *partitions, int parts);
/**
* gpt_fill_header(): Fill the GPT header
*
* @param dev_desc - block device descriptor
* @param gpt_h - GPT header representation
* @param str_guid - disk guid string representation
* @param parts_count - number of partitions
*
* @return - error on str_guid conversion error
*/
int gpt_fill_header(struct blk_desc *dev_desc, gpt_header *gpt_h,
char *str_guid, int parts_count);
/**
* gpt_restore(): Restore GPT partition table
*
* @param dev_desc - block device descriptor
* @param str_disk_guid - disk GUID
* @param partitions - list of partitions
* @param parts - number of partitions
*
* @return zero on success
*/
int gpt_restore(struct blk_desc *dev_desc, char *str_disk_guid,
disk_partition_t *partitions, const int parts_count);
/**
* is_valid_gpt_buf() - Ensure that the Primary GPT information is valid
*
* @param dev_desc - block device descriptor
* @param buf - buffer which contains the MBR and Primary GPT info
*
* @return - '0' on success, otherwise error
*/
int is_valid_gpt_buf(struct blk_desc *dev_desc, void *buf);
/**
* write_mbr_and_gpt_partitions() - write MBR, Primary GPT and Backup GPT
*
* @param dev_desc - block device descriptor
* @param buf - buffer which contains the MBR and Primary GPT info
*
* @return - '0' on success, otherwise error
*/
int write_mbr_and_gpt_partitions(struct blk_desc *dev_desc, void *buf);
/**
* gpt_verify_headers() - Function to read and CRC32 check of the GPT's header
* and partition table entries (PTE)
*
* As a side effect if sets gpt_head and gpt_pte so they point to GPT data.
*
* @param dev_desc - block device descriptor
* @param gpt_head - pointer to GPT header data read from medium
* @param gpt_pte - pointer to GPT partition table enties read from medium
*
* @return - '0' on success, otherwise error
*/
int gpt_verify_headers(struct blk_desc *dev_desc, gpt_header *gpt_head,
gpt_entry **gpt_pte);
/**
* gpt_verify_partitions() - Function to check if partitions' name, start and
* size correspond to '$partitions' env variable
*
* This function checks if on medium stored GPT data is in sync with information
* provided in '$partitions' environment variable. Specificially, name, start
* and size of the partition is checked.
*
* @param dev_desc - block device descriptor
* @param partitions - partition data read from '$partitions' env variable
* @param parts - number of partitions read from '$partitions' env variable
* @param gpt_head - pointer to GPT header data read from medium
* @param gpt_pte - pointer to GPT partition table enties read from medium
*
* @return - '0' on success, otherwise error
*/
int gpt_verify_partitions(struct blk_desc *dev_desc,
disk_partition_t *partitions, int parts,
gpt_header *gpt_head, gpt_entry **gpt_pte);
#endif
2002-03-08 14:31:05 -07:00
#endif /* _PART_H */