diff --git a/README b/README
index e2ca76e7ae..636107fb78 100644
--- a/README
+++ b/README
@@ -1968,6 +1968,18 @@ CBFS (Coreboot Filesystem) support
 		    CONFIG_SYS_I2C_SOFT_SPEED_4 and CONFIG_SYS_I2C_SOFT_SLAVE_4
 		    for defining speed and slave address
 
+		- drivers/i2c/fsl_i2c.c:
+		  - activate i2c driver with CONFIG_SYS_I2C_FSL
+		    define CONFIG_SYS_FSL_I2C_OFFSET for setting the register
+		    offset CONFIG_SYS_FSL_I2C_SPEED for the i2c speed and
+		    CONFIG_SYS_FSL_I2C_SLAVE for the slave addr of the first
+		    bus.
+                  - If your board supports a second fsl i2c bus, define
+		    CONFIG_SYS_FSL_I2C2_OFFSET for the register offset
+		    CONFIG_SYS_FSL_I2C2_SPEED for the speed and
+		    CONFIG_SYS_FSL_I2C2_SLAVE for the slave address of the
+		    second bus.
+
 		additional defines:
 
 		CONFIG_SYS_NUM_I2C_BUSES
@@ -2213,11 +2225,6 @@ CBFS (Coreboot Filesystem) support
 		If not defined, then U-Boot uses predefined value for
 		specified DTT device.
 
-		CONFIG_FSL_I2C
-
-		Define this option if you want to use Freescale's I2C driver in
-		drivers/i2c/fsl_i2c.c.
-
 		CONFIG_I2C_MUX
 
 		Define this option if you have I2C devices reached over 1 .. n
diff --git a/arch/m68k/cpu/mcf5227x/cpu_init.c b/arch/m68k/cpu/mcf5227x/cpu_init.c
index 1928eb384e..e9ac21a31d 100644
--- a/arch/m68k/cpu/mcf5227x/cpu_init.c
+++ b/arch/m68k/cpu/mcf5227x/cpu_init.c
@@ -105,7 +105,7 @@ void cpu_init_f(void)
 	out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK);
 #endif
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	out_8(&gpio->par_i2c, GPIO_PAR_I2C_SCL_SCL | GPIO_PAR_I2C_SDA_SDA);
 #endif
 
diff --git a/arch/m68k/cpu/mcf5227x/speed.c b/arch/m68k/cpu/mcf5227x/speed.c
index 98f554aa7f..30d32071ad 100644
--- a/arch/m68k/cpu/mcf5227x/speed.c
+++ b/arch/m68k/cpu/mcf5227x/speed.c
@@ -134,7 +134,7 @@ int get_clocks(void)
 		gd->bus_clk = gd->arch.flb_clk;
 	}
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	gd->arch.i2c1_clk = gd->bus_clk;
 #endif
 
diff --git a/arch/m68k/cpu/mcf523x/cpu_init.c b/arch/m68k/cpu/mcf523x/cpu_init.c
index d1c0b401c1..1ad5d02d29 100644
--- a/arch/m68k/cpu/mcf523x/cpu_init.c
+++ b/arch/m68k/cpu/mcf523x/cpu_init.c
@@ -115,7 +115,7 @@ void cpu_init_f(void)
 	out_be32(&fbcs->csmr7, CONFIG_SYS_CS7_MASK);
 #endif
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	CONFIG_SYS_I2C_PINMUX_REG &= CONFIG_SYS_I2C_PINMUX_CLR;
 	CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET;
 #endif
diff --git a/arch/m68k/cpu/mcf523x/speed.c b/arch/m68k/cpu/mcf523x/speed.c
index ae462579e2..7876ba8ab5 100644
--- a/arch/m68k/cpu/mcf523x/speed.c
+++ b/arch/m68k/cpu/mcf523x/speed.c
@@ -47,7 +47,7 @@ int get_clocks(void)
 	gd->bus_clk = CONFIG_SYS_CLK;
 	gd->cpu_clk = (gd->bus_clk * 2);
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	gd->arch.i2c1_clk = gd->bus_clk;
 #endif
 
diff --git a/arch/m68k/cpu/mcf52x2/cpu_init.c b/arch/m68k/cpu/mcf52x2/cpu_init.c
index 5d0e9f06f3..5d01670ca8 100644
--- a/arch/m68k/cpu/mcf52x2/cpu_init.c
+++ b/arch/m68k/cpu/mcf52x2/cpu_init.c
@@ -228,7 +228,7 @@ void cpu_init_f(void)
 	/* FlexBus Chipselect */
 	init_fbcs();
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	CONFIG_SYS_I2C_PINMUX_REG =
 	    CONFIG_SYS_I2C_PINMUX_REG & CONFIG_SYS_I2C_PINMUX_CLR;
 	CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET;
@@ -498,7 +498,7 @@ void cpu_init_f(void)
 	init_fbcs();
 #endif				/* #ifndef CONFIG_MONITOR_IS_IN_RAM */
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	CONFIG_SYS_I2C_PINMUX_REG &= CONFIG_SYS_I2C_PINMUX_CLR;
 	CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET;
 #endif
diff --git a/arch/m68k/cpu/mcf52x2/speed.c b/arch/m68k/cpu/mcf52x2/speed.c
index ba7dbaa1cf..ad68692323 100644
--- a/arch/m68k/cpu/mcf52x2/speed.c
+++ b/arch/m68k/cpu/mcf52x2/speed.c
@@ -90,9 +90,9 @@ int get_clocks (void)
 	gd->bus_clk = gd->cpu_clk;
 #endif
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	gd->arch.i2c1_clk = gd->bus_clk;
-#ifdef CONFIG_SYS_I2C2_OFFSET
+#ifdef CONFIG_SYS_I2C2_FSL_OFFSET
 	gd->arch.i2c2_clk = gd->bus_clk;
 #endif
 #endif
diff --git a/arch/m68k/cpu/mcf532x/cpu_init.c b/arch/m68k/cpu/mcf532x/cpu_init.c
index f571fadc35..bd7672d6f4 100644
--- a/arch/m68k/cpu/mcf532x/cpu_init.c
+++ b/arch/m68k/cpu/mcf532x/cpu_init.c
@@ -98,7 +98,7 @@ void cpu_init_f(void)
 	out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK);
 #endif
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	out_8(&gpio->par_feci2c,
 		GPIO_PAR_FECI2C_SDA_SDA | GPIO_PAR_FECI2C_SCL_SCL);
 #endif
@@ -292,7 +292,7 @@ void cpu_init_f(void)
 	out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK);
 #endif
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	out_8(&gpio->par_feci2c,
 		GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA);
 #endif
diff --git a/arch/m68k/cpu/mcf532x/speed.c b/arch/m68k/cpu/mcf532x/speed.c
index 8efb451dc1..6e1d6a58e5 100644
--- a/arch/m68k/cpu/mcf532x/speed.c
+++ b/arch/m68k/cpu/mcf532x/speed.c
@@ -270,7 +270,7 @@ int get_clocks(void)
 	gd->bus_clk = clock_pll(CONFIG_SYS_CLK / 1000, 0) * 1000;
 	gd->cpu_clk = (gd->bus_clk * 3);
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	gd->arch.i2c1_clk = gd->bus_clk;
 #endif
 
diff --git a/arch/m68k/cpu/mcf5445x/cpu_init.c b/arch/m68k/cpu/mcf5445x/cpu_init.c
index 6e947d06f9..3c53a7fe1e 100644
--- a/arch/m68k/cpu/mcf5445x/cpu_init.c
+++ b/arch/m68k/cpu/mcf5445x/cpu_init.c
@@ -212,7 +212,7 @@ void cpu_init_f(void)
 		GPIO_PAR_FBCTL_OE | GPIO_PAR_FBCTL_TA_TA |
 		GPIO_PAR_FBCTL_RW_RW | GPIO_PAR_FBCTL_TS_TS);
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_FSL_I2C
 	out_be16(&gpio->par_feci2c,
 		GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA);
 #endif
diff --git a/arch/m68k/cpu/mcf5445x/speed.c b/arch/m68k/cpu/mcf5445x/speed.c
index 0276d4d826..3b341b8964 100644
--- a/arch/m68k/cpu/mcf5445x/speed.c
+++ b/arch/m68k/cpu/mcf5445x/speed.c
@@ -273,7 +273,7 @@ void setup_5445x_clocks(void)
 #endif
 	}
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	gd->arch.i2c1_clk = gd->bus_clk;
 #endif
 }
@@ -289,7 +289,7 @@ int get_clocks(void)
 	setup_5445x_clocks();
 #endif
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_FSL_I2C
 	gd->arch.i2c1_clk = gd->bus_clk;
 #endif
 
diff --git a/arch/m68k/cpu/mcf547x_8x/cpu_init.c b/arch/m68k/cpu/mcf547x_8x/cpu_init.c
index 4eb8a7c182..4c529dcf91 100644
--- a/arch/m68k/cpu/mcf547x_8x/cpu_init.c
+++ b/arch/m68k/cpu/mcf547x_8x/cpu_init.c
@@ -95,7 +95,7 @@ void cpu_init_f(void)
 	out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK);
 #endif
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	out_be16(&gpio->par_feci2cirq,
 		GPIO_PAR_FECI2CIRQ_SCL | GPIO_PAR_FECI2CIRQ_SDA);
 #endif
diff --git a/arch/m68k/cpu/mcf547x_8x/speed.c b/arch/m68k/cpu/mcf547x_8x/speed.c
index 41aae9d9eb..80e006b9e0 100644
--- a/arch/m68k/cpu/mcf547x_8x/speed.c
+++ b/arch/m68k/cpu/mcf547x_8x/speed.c
@@ -40,7 +40,7 @@ int get_clocks(void)
 	gd->bus_clk = CONFIG_SYS_CLK;
 	gd->cpu_clk = (gd->bus_clk * 2);
 
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	gd->arch.i2c1_clk = gd->bus_clk;
 #endif
 
diff --git a/arch/m68k/include/asm/global_data.h b/arch/m68k/include/asm/global_data.h
index 3ec298ff4a..58a481d834 100644
--- a/arch/m68k/include/asm/global_data.h
+++ b/arch/m68k/include/asm/global_data.h
@@ -26,7 +26,7 @@
 
 /* Architecture-specific global data */
 struct arch_global_data {
-#ifdef CONFIG_FSL_I2C
+#ifdef CONFIG_SYS_I2C_FSL
 	unsigned long	i2c1_clk;
 	unsigned long	i2c2_clk;
 #endif
diff --git a/board/esd/vme8349/vme8349.c b/board/esd/vme8349/vme8349.c
index 96698e7203..8c8b8ee7ab 100644
--- a/board/esd/vme8349/vme8349.c
+++ b/board/esd/vme8349/vme8349.c
@@ -186,11 +186,11 @@ static spd_eeprom_t default_spd_eeprom = {
 
 int vme8349_read_spd(uchar chip, uint addr, int alen, uchar *buffer, int len)
 {
-	int old_bus = I2C_GET_BUS();
+	int old_bus = i2c_get_bus_num();
 	unsigned int l, sum;
 	int valid = 0;
 
-	I2C_SET_BUS(0);
+	i2c_set_bus_num(0);
 
 	if (i2c_read(chip, addr, alen, buffer, len) == 0)
 		if (memcmp(&buffer[64], &default_spd_eeprom.mid[0], 8) == 0) {
@@ -215,7 +215,7 @@ int vme8349_read_spd(uchar chip, uint addr, int alen, uchar *buffer, int len)
 		buffer[63] = sum;
 	}
 
-	I2C_SET_BUS(old_bus);
+	i2c_set_bus_num(old_bus);
 
 	return 0;
 }
diff --git a/board/freescale/m52277evb/README b/board/freescale/m52277evb/README
index d5e7b05650..3178d49d0a 100644
--- a/board/freescale/m52277evb/README
+++ b/board/freescale/m52277evb/README
@@ -82,7 +82,7 @@ CONFIG_CMD_DATE		-- enable to use date feature in u-boot
 CONFIG_MCFTMR		-- define to use DMA timer
 CONFIG_MCFPIT		-- define to use PIT timer
 
-CONFIG_FSL_I2C		-- define to use FSL common I2C driver
+CONFIG_SYS_I2C_FSL	-- define to use FSL common I2C driver
 CONFIG_HARD_I2C		-- define for I2C hardware support
 CONFIG_SYS_I2C_SOFT	-- define for I2C bit-banged
 CONFIG_SYS_I2C_SPEED		-- define for I2C speed
diff --git a/board/freescale/m53017evb/README b/board/freescale/m53017evb/README
index 855bbd14e5..84fc1ecfb1 100644
--- a/board/freescale/m53017evb/README
+++ b/board/freescale/m53017evb/README
@@ -90,7 +90,7 @@ MCFFEC_TOUT_LOOP		-- set FEC timeout loop
 CONFIG_MCFTMR			-- define to use DMA timer
 CONFIG_MCFPIT			-- define to use PIT timer
 
-CONFIG_FSL_I2C			-- define to use FSL common I2C driver
+CONFIG_SYS_I2C_FSL		-- define to use FSL common I2C driver
 CONFIG_HARD_I2C			-- define for I2C hardware support
 CONFIG_SYS_I2C_SOFT		-- define for I2C bit-banged
 CONFIG_SYS_I2C_SPEED		-- define for I2C speed
diff --git a/board/freescale/m5373evb/README b/board/freescale/m5373evb/README
index 61e6d97b6d..52eac7b2ff 100644
--- a/board/freescale/m5373evb/README
+++ b/board/freescale/m5373evb/README
@@ -89,7 +89,7 @@ MCFFEC_TOUT_LOOP	-- set FEC timeout loop
 CONFIG_MCFTMR		-- define to use DMA timer
 CONFIG_MCFPIT		-- define to use PIT timer
 
-CONFIG_FSL_I2C		-- define to use FSL common I2C driver
+CONFIG_SYS_I2C_FSL	-- define to use FSL common I2C driver
 CONFIG_HARD_I2C		-- define for I2C hardware support
 CONFIG_SYS_I2C_SOFT	-- define for I2C bit-banged
 CONFIG_SYS_I2C_SPEED		-- define for I2C speed
diff --git a/board/freescale/m54455evb/README b/board/freescale/m54455evb/README
index 2b25952398..c70c4c5c25 100644
--- a/board/freescale/m54455evb/README
+++ b/board/freescale/m54455evb/README
@@ -112,7 +112,7 @@ _IO_BASE		-- define for IO base address
 CONFIG_MCFTMR		-- define to use DMA timer
 CONFIG_MCFPIT		-- define to use PIT timer
 
-CONFIG_FSL_I2C		-- define to use FSL common I2C driver
+CONFIG_SYS_FSL_I2C	-- define to use FSL common I2C driver
 CONFIG_HARD_I2C		-- define for I2C hardware support
 CONFIG_SYS_I2C_SOFT	-- define for I2C bit-banged
 CONFIG_SYS_I2C_SPEED		-- define for I2C speed
diff --git a/board/freescale/m547xevb/README b/board/freescale/m547xevb/README
index 1a8cbce91d..ce497c0d2a 100644
--- a/board/freescale/m547xevb/README
+++ b/board/freescale/m547xevb/README
@@ -97,7 +97,7 @@ CONFIG_DOS_PARTITION	-- enable DOS read/write
 
 CONFIG_SLTTMR		-- define to use SLT timer
 
-CONFIG_FSL_I2C		-- define to use FSL common I2C driver
+CONFIG_SYS_I2C_FSL	-- define to use FSL common I2C driver
 CONFIG_HARD_I2C		-- define for I2C hardware support
 CONFIG_SYS_I2C_SOFT	-- define for I2C bit-banged
 CONFIG_SYS_I2C_SPEED		-- define for I2C speed
diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c
index 9cc808ed7d..271768dc76 100644
--- a/board/freescale/mpc8349itx/mpc8349itx.c
+++ b/board/freescale/mpc8349itx/mpc8349itx.c
@@ -263,8 +263,7 @@ int misc_init_r(void)
 {
 	int rc = 0;
 
-#ifdef CONFIG_HARD_I2C
-
+#if defined(CONFIG_SYS_I2C)
 	unsigned int orig_bus = i2c_get_bus_num();
 	u8 i2c_data;
 
diff --git a/board/freescale/mpc8349itx/pci.c b/board/freescale/mpc8349itx/pci.c
index 7d30d9b85f..1ab4e0c689 100644
--- a/board/freescale/mpc8349itx/pci.c
+++ b/board/freescale/mpc8349itx/pci.c
@@ -87,7 +87,7 @@ void pci_init_board(void)
 #endif
 	u8 reg8;
 
-#ifdef CONFIG_HARD_I2C
+#if defined(CONFIG_SYS_I2C)
 	i2c_set_bus_num(1);
 	/* Read the PCI_M66EN jumper setting */
 	if ((i2c_read(CONFIG_SYS_I2C_8574_ADDR2, 0, 0, &reg8, sizeof(reg8)) == 0) ||
diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
index 2e0e0c73aa..e4f577f44b 100644
--- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
+++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
@@ -248,7 +248,7 @@ int checkboard(void)
 		in_8(&cpld_data->pcba_rev) & 0x0F);
 
 	/* Initialize i2c early for rom_loc and flash bank information */
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM);
 
 	if (i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 0, 1, &in, 1) < 0 ||
 	    i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 1, 1, &out, 1) < 0 ||
diff --git a/board/keymile/common/ivm.c b/board/keymile/common/ivm.c
index 918a6ab639..a14496f5fb 100644
--- a/board/keymile/common/ivm.c
+++ b/board/keymile/common/ivm.c
@@ -314,29 +314,13 @@ int ivm_analyze_eeprom(unsigned char *buf, int len)
 
 int ivm_read_eeprom(void)
 {
-#if defined(CONFIG_I2C_MUX)
-	I2C_MUX_DEVICE *dev = NULL;
-#endif
 	uchar i2c_buffer[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
 	char	*buf;
 	unsigned long dev_addr = CONFIG_SYS_IVM_EEPROM_ADR;
 	int ret;
 
-#if defined(CONFIG_SYS_I2C)
 	buf = getenv("EEprom_ivm");
 	i2c_set_bus_num(buf ? (int)simple_strtol(buf, NULL, 10) : 0);
-#else
-#if defined(CONFIG_I2C_MUX)
-	/* First init the Bus, select the Bus */
-	buf = (unsigned char *) getenv("EEprom_ivm");
-	if (buf != NULL)
-		dev = i2c_mux_ident_muxstring(buf);
-	if (dev == NULL) {
-		printf("Error couldnt add Bus for IVM\n");
-		return -1;
-	}
-	i2c_set_bus_num(dev->busid);
-#endif
 	/* add deblocking here */
 	i2c_make_abort();
 
diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c
index faaa39bc20..6d45809614 100644
--- a/board/keymile/km83xx/km83xx.c
+++ b/board/keymile/km83xx/km83xx.c
@@ -95,19 +95,6 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
 	{0,  0, 0, 0, QE_IOP_TAB_END},
 };
 
-static int board_init_i2c_busses(void)
-{
-	I2C_MUX_DEVICE *dev = NULL;
-	uchar *dtt_bus = (uchar *)"pca9547:70:a";
-
-	/* Set up the Bus for the DTTs */
-	dev = i2c_mux_ident_muxstring(dtt_bus);
-	if (dev == NULL)
-		printf("Error couldn't add Bus for DTT\n");
-
-	return 0;
-}
-
 #if defined(CONFIG_SUVD3)
 const uint upma_table[] = {
 	0x1ffedc00, 0x0ffcdc80, 0x0ffcdc80, 0x0ffcdc04, /* Words 0 to 3 */
@@ -206,8 +193,6 @@ int board_early_init_r(void)
 
 int misc_init_r(void)
 {
-	/* add board specific i2c busses */
-	board_init_i2c_busses();
 	return 0;
 }
 
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index a885e26ce9..1202d2454e 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -28,7 +28,6 @@ LIB	:= $(obj)libi2c.o
 COBJS-$(CONFIG_BFIN_TWI_I2C) += bfin-twi_i2c.o
 COBJS-$(CONFIG_DRIVER_DAVINCI_I2C) += davinci_i2c.o
 COBJS-$(CONFIG_DW_I2C) += designware_i2c.o
-COBJS-$(CONFIG_FSL_I2C) += fsl_i2c.o
 COBJS-$(CONFIG_I2C_MVTWSI) += mvtwsi.o
 COBJS-$(CONFIG_I2C_MV) += mv_i2c.o
 COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o
@@ -46,6 +45,7 @@ COBJS-$(CONFIG_U8500_I2C) += u8500_i2c.o
 COBJS-$(CONFIG_SH_I2C) += sh_i2c.o
 COBJS-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o
 COBJS-$(CONFIG_SYS_I2C) += i2c_core.o
+COBJS-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o
 COBJS-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o
 COBJS-$(CONFIG_ZYNQ_I2C) += zynq_i2c.o
 
diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c
index 5d7e010319..38455e1c66 100644
--- a/drivers/i2c/fsl_i2c.c
+++ b/drivers/i2c/fsl_i2c.c
@@ -1,6 +1,9 @@
 /*
  * Copyright 2006,2009 Freescale Semiconductor, Inc.
  *
+ * 2012, Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ * Changes for multibus/multiadapter I2C support.
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * Version 2 as published by the Free Software Foundation.
@@ -17,12 +20,8 @@
  */
 
 #include <common.h>
-
-#ifdef CONFIG_HARD_I2C
-
 #include <command.h>
 #include <i2c.h>		/* Functional interface */
-
 #include <asm/io.h>
 #include <asm/fsl_i2c.h>	/* HW definitions */
 
@@ -47,25 +46,10 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-/* Initialize the bus pointer to whatever one the SPD EEPROM is on.
- * Default is bus 0.  This is necessary because the DDR initialization
- * runs from ROM, and we can't switch buses because we can't modify
- * the global variables.
- */
-#ifndef CONFIG_SYS_SPD_BUS_NUM
-#define CONFIG_SYS_SPD_BUS_NUM 0
-#endif
-static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = CONFIG_SYS_SPD_BUS_NUM;
-#if defined(CONFIG_I2C_MUX)
-static unsigned int i2c_bus_num_mux __attribute__ ((section ("data"))) = 0;
-#endif
-
-static unsigned int i2c_bus_speed[2] = {CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SPEED};
-
 static const struct fsl_i2c *i2c_dev[2] = {
-	(struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET),
-#ifdef CONFIG_SYS_I2C2_OFFSET
-	(struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C2_OFFSET)
+	(struct fsl_i2c *)(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_I2C_OFFSET),
+#ifdef CONFIG_SYS_FSL_I2C2_OFFSET
+	(struct fsl_i2c *)(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_I2C2_OFFSET)
 #endif
 };
 
@@ -222,12 +206,9 @@ static unsigned int get_i2c_clock(int bus)
 		return gd->arch.i2c1_clk;	/* I2C1 clock */
 }
 
-void
-i2c_init(int speed, int slaveadd)
+static void fsl_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
 {
 	const struct fsl_i2c *dev;
-	unsigned int temp;
-	int bus_num, i;
 
 #ifdef CONFIG_SYS_I2C_INIT_BOARD
 	/* Call board specific i2c bus reset routine before accessing the
@@ -236,23 +217,14 @@ i2c_init(int speed, int slaveadd)
 	*/
 	i2c_init_board();
 #endif
-#ifdef CONFIG_SYS_I2C2_OFFSET
-	bus_num = 2;
-#else
-	bus_num = 1;
-#endif
-	for (i = 0; i < bus_num; i++) {
-		dev = i2c_dev[i];
+	dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 
-		writeb(0, &dev->cr);		/* stop I2C controller */
-		udelay(5);			/* let it shutdown in peace */
-		temp = set_i2c_bus_speed(dev, get_i2c_clock(i), speed);
-		if (gd->flags & GD_FLG_RELOC)
-			i2c_bus_speed[i] = temp;
-		writeb(slaveadd << 1, &dev->adr);/* write slave address */
-		writeb(0x0, &dev->sr);		/* clear status register */
-		writeb(I2C_CR_MEN, &dev->cr);	/* start I2C controller */
-	}
+	writeb(0, &dev->cr);		/* stop I2C controller */
+	udelay(5);			/* let it shutdown in peace */
+	set_i2c_bus_speed(dev, get_i2c_clock(adap->hwadapnr), speed);
+	writeb(slaveadd << 1, &dev->adr);/* write slave address */
+	writeb(0x0, &dev->sr);		/* clear status register */
+	writeb(I2C_CR_MEN, &dev->cr);	/* start I2C controller */
 
 #ifdef CONFIG_SYS_I2C_BOARD_LATE_INIT
 	/* Call board specific i2c bus reset routine AFTER the bus has been
@@ -265,12 +237,13 @@ i2c_init(int speed, int slaveadd)
 }
 
 static int
-i2c_wait4bus(void)
+i2c_wait4bus(struct i2c_adapter *adap)
 {
+	struct fsl_i2c *dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 	unsigned long long timeval = get_ticks();
 	const unsigned long long timeout = usec2ticks(CONFIG_I2C_MBB_TIMEOUT);
 
-	while (readb(&i2c_dev[i2c_bus_num]->sr) & I2C_SR_MBB) {
+	while (readb(&dev->sr) & I2C_SR_MBB) {
 		if ((get_ticks() - timeval) > timeout)
 			return -1;
 	}
@@ -279,20 +252,21 @@ i2c_wait4bus(void)
 }
 
 static __inline__ int
-i2c_wait(int write)
+i2c_wait(struct i2c_adapter *adap, int write)
 {
 	u32 csr;
 	unsigned long long timeval = get_ticks();
 	const unsigned long long timeout = usec2ticks(CONFIG_I2C_TIMEOUT);
+	struct fsl_i2c *dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 
 	do {
-		csr = readb(&i2c_dev[i2c_bus_num]->sr);
+		csr = readb(&dev->sr);
 		if (!(csr & I2C_SR_MIF))
 			continue;
 		/* Read again to allow register to stabilise */
-		csr = readb(&i2c_dev[i2c_bus_num]->sr);
+		csr = readb(&dev->sr);
 
-		writeb(0x0, &i2c_dev[i2c_bus_num]->sr);
+		writeb(0x0, &dev->sr);
 
 		if (csr & I2C_SR_MAL) {
 			debug("i2c_wait: MAL\n");
@@ -317,29 +291,32 @@ i2c_wait(int write)
 }
 
 static __inline__ int
-i2c_write_addr (u8 dev, u8 dir, int rsta)
+i2c_write_addr(struct i2c_adapter *adap, u8 dev, u8 dir, int rsta)
 {
+	struct fsl_i2c *device = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
+
 	writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX
 	       | (rsta ? I2C_CR_RSTA : 0),
-	       &i2c_dev[i2c_bus_num]->cr);
+	       &device->cr);
 
-	writeb((dev << 1) | dir, &i2c_dev[i2c_bus_num]->dr);
+	writeb((dev << 1) | dir, &device->dr);
 
-	if (i2c_wait(I2C_WRITE_BIT) < 0)
+	if (i2c_wait(adap, I2C_WRITE_BIT) < 0)
 		return 0;
 
 	return 1;
 }
 
 static __inline__ int
-__i2c_write(u8 *data, int length)
+__i2c_write(struct i2c_adapter *adap, u8 *data, int length)
 {
+	struct fsl_i2c *dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 	int i;
 
 	for (i = 0; i < length; i++) {
-		writeb(data[i], &i2c_dev[i2c_bus_num]->dr);
+		writeb(data[i], &dev->dr);
 
-		if (i2c_wait(I2C_WRITE_BIT) < 0)
+		if (i2c_wait(adap, I2C_WRITE_BIT) < 0)
 			break;
 	}
 
@@ -347,57 +324,60 @@ __i2c_write(u8 *data, int length)
 }
 
 static __inline__ int
-__i2c_read(u8 *data, int length)
+__i2c_read(struct i2c_adapter *adap, u8 *data, int length)
 {
+	struct fsl_i2c *dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 	int i;
 
 	writeb(I2C_CR_MEN | I2C_CR_MSTA | ((length == 1) ? I2C_CR_TXAK : 0),
-	       &i2c_dev[i2c_bus_num]->cr);
+	       &dev->cr);
 
 	/* dummy read */
-	readb(&i2c_dev[i2c_bus_num]->dr);
+	readb(&dev->dr);
 
 	for (i = 0; i < length; i++) {
-		if (i2c_wait(I2C_READ_BIT) < 0)
+		if (i2c_wait(adap, I2C_READ_BIT) < 0)
 			break;
 
 		/* Generate ack on last next to last byte */
 		if (i == length - 2)
 			writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_TXAK,
-			       &i2c_dev[i2c_bus_num]->cr);
+			       &dev->cr);
 
 		/* Do not generate stop on last byte */
 		if (i == length - 1)
 			writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX,
-			       &i2c_dev[i2c_bus_num]->cr);
+			       &dev->cr);
 
-		data[i] = readb(&i2c_dev[i2c_bus_num]->dr);
+		data[i] = readb(&dev->dr);
 	}
 
 	return i;
 }
 
-int
-i2c_read(u8 dev, uint addr, int alen, u8 *data, int length)
+static int
+fsl_i2c_read(struct i2c_adapter *adap, u8 dev, uint addr, int alen, u8 *data,
+	     int length)
 {
+	struct fsl_i2c *device = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 	int i = -1; /* signal error */
 	u8 *a = (u8*)&addr;
 
-	if (i2c_wait4bus() < 0)
+	if (i2c_wait4bus(adap) < 0)
 		return -1;
 
 	if ((!length || alen > 0)
-	    && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0
-	    && __i2c_write(&a[4 - alen], alen) == alen)
+	    && i2c_write_addr(adap, dev, I2C_WRITE_BIT, 0) != 0
+	    && __i2c_write(adap, &a[4 - alen], alen) == alen)
 		i = 0; /* No error so far */
 
 	if (length &&
-	    i2c_write_addr(dev, I2C_READ_BIT, alen ? 1 : 0) != 0)
-		i = __i2c_read(data, length);
+	    i2c_write_addr(adap, dev, I2C_READ_BIT, alen ? 1 : 0) != 0)
+		i = __i2c_read(adap, data, length);
 
-	writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);
+	writeb(I2C_CR_MEN, &device->cr);
 
-	if (i2c_wait4bus()) /* Wait until STOP */
+	if (i2c_wait4bus(adap)) /* Wait until STOP */
 		debug("i2c_read: wait4bus timed out\n");
 
 	if (i == length)
@@ -406,20 +386,22 @@ i2c_read(u8 dev, uint addr, int alen, u8 *data, int length)
 	return -1;
 }
 
-int
-i2c_write(u8 dev, uint addr, int alen, u8 *data, int length)
+static int
+fsl_i2c_write(struct i2c_adapter *adap, u8 dev, uint addr, int alen,
+	      u8 *data, int length)
 {
+	struct fsl_i2c *device = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 	int i = -1; /* signal error */
 	u8 *a = (u8*)&addr;
 
-	if (i2c_wait4bus() >= 0
-	    && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0
-	    && __i2c_write(&a[4 - alen], alen) == alen) {
-		i = __i2c_write(data, length);
+	if (i2c_wait4bus(adap) >= 0 &&
+	    i2c_write_addr(adap, dev, I2C_WRITE_BIT, 0) != 0 &&
+	    __i2c_write(adap, &a[4 - alen], alen) == alen) {
+		i = __i2c_write(adap, data, length);
 	}
 
-	writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);
-	if (i2c_wait4bus()) /* Wait until STOP */
+	writeb(I2C_CR_MEN, &device->cr);
+	if (i2c_wait4bus(adap)) /* Wait until STOP */
 		debug("i2c_write: wait4bus timed out\n");
 
 	if (i == length)
@@ -428,72 +410,42 @@ i2c_write(u8 dev, uint addr, int alen, u8 *data, int length)
 	return -1;
 }
 
-int
-i2c_probe(uchar chip)
+static int
+fsl_i2c_probe(struct i2c_adapter *adap, uchar chip)
 {
+	struct fsl_i2c *dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 	/* For unknow reason the controller will ACK when
 	 * probing for a slave with the same address, so skip
 	 * it.
 	 */
-	if (chip == (readb(&i2c_dev[i2c_bus_num]->adr) >> 1))
+	if (chip == (readb(&dev->adr) >> 1))
 		return -1;
 
-	return i2c_read(chip, 0, 0, NULL, 0);
+	return fsl_i2c_read(adap, chip, 0, 0, NULL, 0);
 }
 
-int i2c_set_bus_num(unsigned int bus)
+static unsigned int fsl_i2c_set_bus_speed(struct i2c_adapter *adap,
+			unsigned int speed)
 {
-#if defined(CONFIG_I2C_MUX)
-	if (bus < CONFIG_SYS_MAX_I2C_BUS) {
-		i2c_bus_num = bus;
-	} else {
-		int	ret;
+	struct fsl_i2c *dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr];
 
-		ret = i2x_mux_select_mux(bus);
-		if (ret)
-			return ret;
-		i2c_bus_num = 0;
-	}
-	i2c_bus_num_mux = bus;
-#else
-#ifdef CONFIG_SYS_I2C2_OFFSET
-	if (bus > 1) {
-#else
-	if (bus > 0) {
-#endif
-		return -1;
-	}
-
-	i2c_bus_num = bus;
-#endif
-	return 0;
-}
-
-int i2c_set_bus_speed(unsigned int speed)
-{
-	unsigned int i2c_clk = (i2c_bus_num == 1)
-			? gd->arch.i2c2_clk : gd->arch.i2c1_clk;
-
-	writeb(0, &i2c_dev[i2c_bus_num]->cr);		/* stop controller */
-	i2c_bus_speed[i2c_bus_num] =
-		set_i2c_bus_speed(i2c_dev[i2c_bus_num], i2c_clk, speed);
-	writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);	/* start controller */
+	writeb(0, &dev->cr);		/* stop controller */
+	set_i2c_bus_speed(dev, get_i2c_clock(adap->hwadapnr), speed);
+	writeb(I2C_CR_MEN, &dev->cr);	/* start controller */
 
 	return 0;
 }
 
-unsigned int i2c_get_bus_num(void)
-{
-#if defined(CONFIG_I2C_MUX)
-	return i2c_bus_num_mux;
-#else
-	return i2c_bus_num;
+/*
+ * Register fsl i2c adapters
+ */
+U_BOOT_I2C_ADAP_COMPLETE(fsl_0, fsl_i2c_init, fsl_i2c_probe, fsl_i2c_read,
+			 fsl_i2c_write, fsl_i2c_set_bus_speed,
+			 CONFIG_SYS_FSL_I2C_SPEED, CONFIG_SYS_FSL_I2C_SLAVE,
+			 0)
+#ifdef CONFIG_SYS_FSL_I2C2_OFFSET
+U_BOOT_I2C_ADAP_COMPLETE(fsl_1, fsl_i2c_init, fsl_i2c_probe, fsl_i2c_read,
+			 fsl_i2c_write, fsl_i2c_set_bus_speed,
+			 CONFIG_SYS_FSL_I2C2_SPEED, CONFIG_SYS_FSL_I2C2_SLAVE,
+			 1)
 #endif
-}
-
-unsigned int i2c_get_bus_speed(void)
-{
-	return i2c_bus_speed[i2c_bus_num];
-}
-
-#endif /* CONFIG_HARD_I2C */
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index a823f9f3a7..43d0e7da83 100644
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -459,14 +459,14 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
 
 /* I2C */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed in Hz */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x118000
-#define CONFIG_SYS_I2C2_OFFSET		0x119000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL		/* Use FSL common I2C driver */
+#define CONFIG_SYS_FSL_I2C_SPEED	400000	/* I2C speed in Hz */
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000	/* I2C speed in Hz */
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x118000
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x119000
 
 /*
  * RTC configuration
diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index a3f64408de..15ab6d0a12 100644
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -275,12 +275,11 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
 
-#define CONFIG_FSL_I2C			/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C			/* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED		400000 /* I2C speed and slave address*/
-#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
 
 /* I2C EEPROM */
 #define CONFIG_CMD_EEPROM
diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index 3aa44435a2..7d5a8e6d0f 100644
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -451,15 +451,14 @@ combinations. this should be removed later
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
 
-#define CONFIG_FSL_I2C			/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C			/* I2C with hardware support */
-#undef CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED		400800 /* I2C speed and slave address*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400800 /* I2C speed and slave address*/
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_SPEED	400800 /* I2C speed and slave address*/
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 /* I2C EEPROM */
 #define CONFIG_ID_EEPROM
diff --git a/include/configs/HWW1U1A.h b/include/configs/HWW1U1A.h
index 2b72a33487..0284f45732 100644
--- a/include/configs/HWW1U1A.h
+++ b/include/configs/HWW1U1A.h
@@ -218,16 +218,16 @@
 /* -------------------------------------------------------------------- */
 
 /* Generic FreeScale hardware I2C support */
-#define CONFIG_HARD_I2C
-#define CONFIG_FSL_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x29} }
 #define CONFIG_CMD_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_OFFSET  0x3000
-#define CONFIG_SYS_I2C2_OFFSET 0x3100
-
-/* I2C bus configuration */
-#define CONFIG_SYS_I2C_SPEED 400000
-#define CONFIG_SYS_I2C_SLAVE 0x7F
 
 /* DDR2 SO-RDIMM SPD EEPROM is at I2C0-0x51 */
 #define CONFIG_SYS_SPD_BUS_NUM 0
diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h
index 209c1223f4..8410d8b795 100644
--- a/include/configs/M5208EVBE.h
+++ b/include/configs/M5208EVBE.h
@@ -82,11 +82,11 @@
 #undef CONFIG_MCFPIT
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C			/* I2C with hw support */
-#define CONFIG_SYS_I2C_SPEED		80000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
 #define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
 
 #define CONFIG_BOOTDELAY		1	/* autoboot after 5 seconds */
diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h
index b1bdac2d7b..4275088208 100644
--- a/include/configs/M52277EVB.h
+++ b/include/configs/M52277EVB.h
@@ -145,11 +145,11 @@
 #undef CONFIG_MCFPIT
 
 /* I2c */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_SYS_I2C_SPEED		80000	/* I2C speed and slave address  */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
 #define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
 
 /* DSPI and Serial Flash */
diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h
index dfc2ddf35d..3ba4d14a74 100644
--- a/include/configs/M5235EVB.h
+++ b/include/configs/M5235EVB.h
@@ -99,11 +99,11 @@
 #undef CONFIG_MCFPIT
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C		/* I2C with hw support */
-#define CONFIG_SYS_I2C_SPEED		80000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x00000300
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_i2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x00000300
 #define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 #define CONFIG_SYS_I2C_PINMUX_REG	(gpio->par_qspi)
 #define CONFIG_SYS_I2C_PINMUX_CLR	~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK)
diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h
index fe1cca50e1..eb375f0385 100644
--- a/include/configs/M5253DEMO.h
+++ b/include/configs/M5253DEMO.h
@@ -114,11 +114,11 @@
 #define CONFIG_HOSTNAME		M5253DEMO
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C		/* I2C with hw support */
-#define CONFIG_SYS_I2C_SPEED		80000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x00000280
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x00000280
 #define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 #define CONFIG_SYS_I2C_PINMUX_REG	(*(u32 *) (CONFIG_SYS_MBAR+0x19C))
 #define CONFIG_SYS_I2C_PINMUX_CLR	(0xFFFFE7FF)
diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h
index e8a8998fcc..9ca850eb47 100644
--- a/include/configs/M5271EVB.h
+++ b/include/configs/M5271EVB.h
@@ -109,11 +109,11 @@
 #endif
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C		/* I2C with hw support */
-#define CONFIG_SYS_I2C_SPEED		80000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x00000300
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x00000300
 #define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 
 #define CONFIG_BOOTDELAY	1	/* autoboot after 1 seconds */
diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h
index fbf0c9d9ac..9d2dfa0a06 100644
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -109,11 +109,11 @@
 #endif
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C		/* I2C with hw support */
-#define CONFIG_SYS_I2C_SPEED		80000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x00000300
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x00000300
 #define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 #define CONFIG_SYS_I2C_PINMUX_REG	(gpio_reg->par_feci2c)
 #define CONFIG_SYS_I2C_PINMUX_CLR	(0xFFF0)
diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h
index bedba2b290..4bb693a738 100644
--- a/include/configs/M53017EVB.h
+++ b/include/configs/M53017EVB.h
@@ -101,11 +101,11 @@
 #undef CONFIG_MCFPIT
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C			/* I2C with hw support */
-#define CONFIG_SYS_I2C_SPEED		80000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
 #define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
 
 #define CONFIG_BOOTDELAY		1	/* autoboot after 5 seconds */
diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h
index 06fa57cc02..23ee61e4da 100644
--- a/include/configs/M5329EVB.h
+++ b/include/configs/M5329EVB.h
@@ -95,11 +95,11 @@
 #undef CONFIG_MCFPIT
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C			/* I2C with hw support */
-#define CONFIG_SYS_I2C_SPEED		80000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
 #define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 
 #define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds */
diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h
index faa4f86e43..bbfef903c9 100644
--- a/include/configs/M5373EVB.h
+++ b/include/configs/M5373EVB.h
@@ -95,11 +95,11 @@
 #undef CONFIG_MCFPIT
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C		/* I2C with hw support */
-#define CONFIG_SYS_I2C_SPEED		80000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
 #define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 
 #define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds */
diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h
index 627c1ae005..817d79ee2f 100644
--- a/include/configs/M54418TWR.h
+++ b/include/configs/M54418TWR.h
@@ -213,7 +213,7 @@
 #undef CONFIG_MCFPIT
 
 /* I2c */
-#undef CONFIG_FSL_I2C
+#undef CONFIG_SYS_FSL_I2C
 #undef CONFIG_HARD_I2C		/* I2C with hardware support */
 #undef	CONFIG_SYS_I2C_SOFT	/* I2C bit-banged */
 /* I2C speed and slave address  */
diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h
index 5dbe0b47c1..85cd46416a 100644
--- a/include/configs/M54451EVB.h
+++ b/include/configs/M54451EVB.h
@@ -156,11 +156,11 @@
 #undef CONFIG_MCFPIT
 
 /* I2c */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_SYS_I2C_SPEED		80000	/* I2C speed and slave address  */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
 #define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
 
 /* DSPI and Serial Flash */
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index 8246e68e46..aa7e9f8327 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -189,11 +189,11 @@
 #undef CONFIG_MCFPIT
 
 /* I2c */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_SYS_I2C_SPEED		80000	/* I2C speed and slave address  */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSLI2C_OFFSET	0x58000
 #define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 
 /* DSPI and Serial Flash */
diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h
index 6e9cba00a7..5377a51251 100644
--- a/include/configs/M5475EVB.h
+++ b/include/configs/M5475EVB.h
@@ -120,11 +120,11 @@
 #endif
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C		/* I2C with hw support */
-#define CONFIG_SYS_I2C_SPEED		80000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x00008F00
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x00008F00
 #define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 
 /* PCI */
diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h
index 24f28e0ff5..316e07c0ad 100644
--- a/include/configs/M5485EVB.h
+++ b/include/configs/M5485EVB.h
@@ -117,11 +117,11 @@
 #endif
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C		/* I2C with hw support */
-#define CONFIG_SYS_I2C_SPEED		80000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x00008F00
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x00008F00
 #define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 
 /* PCI */
diff --git a/include/configs/MERGERBOX.h b/include/configs/MERGERBOX.h
index 2496639512..0f17411b03 100644
--- a/include/configs/MERGERBOX.h
+++ b/include/configs/MERGERBOX.h
@@ -224,13 +224,14 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS 1
 
 /* I2C */
-#define CONFIG_HARD_I2C
-#define CONFIG_FSL_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED		120000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 /*
  * General PCI
diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h
index f10555ce01..44caa59894 100644
--- a/include/configs/MPC8308RDB.h
+++ b/include/configs/MPC8308RDB.h
@@ -350,14 +350,15 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_FSL_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED	400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{ {0, 0x51} } /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET	0x3000
-#define CONFIG_SYS_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x51} }
 
 /*
  * SPI on header J8
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 1d753e76b9..e6c60b3c93 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -403,14 +403,15 @@
 #define CONFIG_SYS_HUSH_PARSER
 
 /* I2C */
-#define CONFIG_HARD_I2C			/* I2C with hardware support*/
-#define CONFIG_FSL_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{ {0, 0x69} } /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET	0x3000
-#define CONFIG_SYS_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /*
  * General PCI
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index ee806c4403..2f5addc3ce 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -347,13 +347,12 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED		400000 /* I2C speed and slave addr */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES		{0x51} /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x51} }
 
 /*
  * Board info - revision and where boot from
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index d32b14a105..d5db65df11 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -233,12 +233,12 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x51}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x51} }
 
 /*
  * Config on-board EEPROM
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index a35c6b6d84..beee1904ef 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -326,12 +326,12 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x51}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x51} }
 
 /*
  * Config on-board RTC
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 7c3f35c3af..754a9eb335 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -354,14 +354,15 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#define CONFIG_FSL_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{ {0, 0x69} }	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET	0x3000
-#define CONFIG_SYS_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /* SPI */
 #define CONFIG_MPC8XXX_SPI
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index c67ffdba0f..0d5a026582 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -90,7 +90,7 @@
 
 #define CONFIG_PCI
 #define CONFIG_RTC_DS1337
-#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C
 #define CONFIG_TSEC_ENET		/* TSEC Ethernet support */
 
 /*
@@ -98,12 +98,15 @@
  */
 
 /* I2C */
-#ifdef CONFIG_HARD_I2C
+#ifdef CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
-#define CONFIG_FSL_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
 #define CONFIG_SYS_SPD_BUS_NUM		1	/* The I2C bus for SPD */
 #define CONFIG_SYS_RTC_BUS_NUM		1	/* The I2C bus for RTC */
 
@@ -115,9 +118,6 @@
 #define CONFIG_SYS_I2C_RTC_ADDR		0x68	/* I2C1, DS1339 RTC*/
 #define SPD_EEPROM_ADDRESS		0x51	/* I2C1, DDR */
 
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-
 /* Don't probe these addresses: */
 #define CONFIG_SYS_I2C_NOPROBES	{ {1, CONFIG_SYS_I2C_8574_ADDR1}, \
 				 {1, CONFIG_SYS_I2C_8574_ADDR2}, \
@@ -197,7 +197,7 @@
 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_MAX_MEM_MAPPED   ((phys_size_t)256 << 20)
 
-#ifdef CONFIG_HARD_I2C
+#ifdef CONFIG_SYS_I2C
 #define CONFIG_SPD_EEPROM		/* use SPD EEPROM for DDR setup*/
 #endif
 
@@ -543,7 +543,7 @@ boards, we say we have two, but don't display a message if we find only one. */
 	#define CONFIG_CMD_PCI
 #endif
 
-#ifdef CONFIG_HARD_I2C
+#ifdef CONFIG_SYS_I2C
 	#define CONFIG_CMD_I2C
 #endif
 
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index 4d6486bb30..2b7af86690 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -423,13 +423,12 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x52} /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET	0x3000
-#define CONFIG_SYS_I2C2_OFFSET 0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x52} }
 
 /*
  * Config on-board RTC
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index 29e77195de..f189039e86 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -287,14 +287,15 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_FSL_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{ {0, 0x52} } /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET	0x3000
-#define CONFIG_SYS_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x52} }
 
 /*
  * General PCI
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 91c8a34859..cb0863dd91 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -341,13 +341,12 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED	400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x51} /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET	0x3000
-#define CONFIG_SYS_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x51} }
 
 /*
  * Config on-board RTC
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 3279e3cf6f..d014e6814e 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -367,13 +367,12 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS 1
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED	400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x51} /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET	0x3000
-#define CONFIG_SYS_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x51} }
 
 /*
  * Config on-board RTC
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index f560b56d46..052fb54441 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -434,14 +434,15 @@
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{{0, 0x29}}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x29} }
 
 /*
  * I2C2 EEPROM
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index a42dec4ed8..25638ac484 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -260,12 +260,12 @@
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /* RapidIO MMU */
 #define CONFIG_SYS_RIO_MEM_VIRT	0xc0000000	/* base address */
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index 13011b5a87..a486347dbc 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -283,12 +283,12 @@ extern unsigned long get_clock_freq(void);
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /* EEPROM */
 #define CONFIG_ID_EEPROM
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index b00468eb8b..48a3ea1702 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -232,13 +232,13 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3100
 
 /*
  * General PCI
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 50e318c5d6..2a1de524dc 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -358,12 +358,12 @@ extern unsigned long get_clock_freq(void);
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#define CONFIG_SYS_I2C_SPEED		400000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /* EEPROM */
 #define CONFIG_ID_EEPROM
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 388ba9ba1e..d4a395f608 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -281,12 +281,12 @@ extern unsigned long get_clock_freq(void);
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /* EEPROM */
 #define CONFIG_ID_EEPROM
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 04f6a656e6..7a6231192f 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -254,12 +254,12 @@
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /* RapidIO MMU */
 #define CONFIG_SYS_RIO_MEM_VIRT	0xc0000000	/* base address */
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 05a69af6ae..6cda16b64f 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -266,15 +266,16 @@ extern unsigned long get_clock_freq(void);
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x52
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES        {{0,0x69}}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
 
 /*
  * General PCI
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 23bd90880a..e36aadee8f 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -302,14 +302,15 @@ extern unsigned long get_clock_freq(void);
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{{0,0x69}}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET	0x3000
-#define CONFIG_SYS_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /*
  * I2C2 EEPROM
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 45abcf61de..f794fdb0ae 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -431,15 +431,16 @@
 #define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
 
 /* I2C */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x29} }
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{{0,0x29}}/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
 
 /*
  * I2C2 EEPROM
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index 0a2e39b118..1553a746c8 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -252,12 +252,12 @@
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /*
  * General PCI
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 3ac5b2beb1..6d6058f5ef 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -298,12 +298,12 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /*
  * RapidIO MMU
diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h
index afd4c0356d..8342a1a7e1 100644
--- a/include/configs/MVBLM7.h
+++ b/include/configs/MVBLM7.h
@@ -44,7 +44,6 @@
 #define CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_PCI_SKIP_HOST_BRIDGE
-#define CONFIG_HARD_I2C
 #define CONFIG_TSEC_ENET
 #define CONFIG_MPC8XXX_SPI
 #define CONFIG_HARD_SPI
@@ -52,13 +51,14 @@
 #define CONFIG_MISC_INIT_R
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
-
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	100000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	100000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 /*
  * DDR Setup
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index ed1a42916d..ba0a396cee 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -489,14 +489,15 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
 
-#define CONFIG_FSL_I2C			/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C			/* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED		400000 /* I2C speed and slave address*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
+/* I2C */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 /* I2C EEPROM */
 #undef CONFIG_ID_EEPROM
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index 9c27182dc7..40076471ac 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -361,15 +361,15 @@
 #define CONFIG_FIT_VERBOSE
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED		400000
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 #define CONFIG_SYS_I2C_NOPROBES		{{0, 0x29}}
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
 
 /*
  * I2C2 EEPROM
diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h
index fee8040e2d..f21d9e860b 100644
--- a/include/configs/P1023RDB.h
+++ b/include/configs/P1023RDB.h
@@ -204,13 +204,14 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
 
 /* I2C */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 /*
  * I2C2 EEPROM
diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h
index f6ee2515a3..7e2679bd2f 100644
--- a/include/configs/P1023RDS.h
+++ b/include/configs/P1023RDS.h
@@ -313,14 +313,15 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
 
 /* I2C */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x51
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
 
 /*
  * I2C2 EEPROM
diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index 699e9ebcda..b86637cd8b 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -367,15 +367,15 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
 
 /* I2C */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{{0,0x29}}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x29} }
 
 /*
  * I2C2 EEPROM
diff --git a/include/configs/P2020COME.h b/include/configs/P2020COME.h
index c8f5a85ded..3266e54134 100644
--- a/include/configs/P2020COME.h
+++ b/include/configs/P2020COME.h
@@ -225,15 +225,15 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_FIT_VERBOSE		1
 
 /* I2C */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED		400000  /* I2C speed and slave address*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 #define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x29} }
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
 
 /*
  * I2C2 EEPROM
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index 229117c18d..94b77d1dc7 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -387,15 +387,16 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{{0,0x29}}/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x29} }
 
 /*
  * I2C2 EEPROM
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 4ea8717368..2c2b609b1a 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -367,14 +367,14 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
 
 /* I2C */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED		400000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x118000
-#define CONFIG_SYS_I2C2_OFFSET		0x118100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 /*
  * RapidIO
diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h
index 318c4c5d51..e127d6f13f 100644
--- a/include/configs/SIMPC8313.h
+++ b/include/configs/SIMPC8313.h
@@ -245,14 +245,15 @@
 #define CONFIG_SYS_HUSH_PARSER
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#define CONFIG_FSL_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{ {0, 0x69} } /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET	0x3000
-#define CONFIG_SYS_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /*
  * General PCI
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index f22eb35c2f..89b6db6cf9 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -187,11 +187,11 @@
 /*
  * I2C
  */
-#define CONFIG_HARD_I2C			/* I2C with hardware support */
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed: 400KHz */
-#define CONFIG_SYS_I2C_SLAVE		0x7F	/* slave address */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
 
 /* I2C EEPROM, configuration for onboard EEPROMs 24C256 and 24C32 */
 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h
index 6dabe57e7c..f641959cc1 100644
--- a/include/configs/astro_mcf5373l.h
+++ b/include/configs/astro_mcf5373l.h
@@ -116,11 +116,11 @@
 #undef CONFIG_MCFPIT
 
 /* I2C */
-#define CONFIG_FSL_I2C
-#define CONFIG_HARD_I2C			/* I2C with hw support */
-#define CONFIG_SYS_I2C_SPEED		80000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	80000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
 #define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
 
 /*
diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h
index cdd79f0769..c6aad01dba 100644
--- a/include/configs/controlcenterd.h
+++ b/include/configs/controlcenterd.h
@@ -192,15 +192,14 @@
 /*
  * I2C
  */
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_CMD_I2C
-
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
-#define CONFIG_SYS_I2C_SPEED		400000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 /* Probing DP501 I2C-Bridge will hang */
 #define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x30}, {0, 0x37}, {0, 0x3a}, \
 					  {0, 0x3b}, {0, 0x50} }
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 66c7b4f95f..41f33d964c 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -362,14 +362,14 @@
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
 
 /* I2C */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x118000
-#define CONFIG_SYS_I2C2_OFFSET		0x118100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x118000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x118100
 
 /*
  * RapidIO
diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h
index 459f56878c..6e734df569 100644
--- a/include/configs/eb_cpu5282.h
+++ b/include/configs/eb_cpu5282.h
@@ -262,14 +262,14 @@
  * I2C
  */
 
-#define CONFIG_HARD_I2C
-#define CONFIG_FSL_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
 
-#define CONFIG_SYS_I2C_OFFSET		0x00000300
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x00000300
 #define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
 
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		0
+#define CONFIG_SYS_FSL_I2C_SPEED	100000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0
 
 #ifdef CONFIG_CMD_DATE
 #define CONFIG_RTC_DS1338
diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h
index 5a430edbc3..a6f8ebd9de 100644
--- a/include/configs/km/km83xx-common.h
+++ b/include/configs/km/km83xx-common.h
@@ -204,14 +204,21 @@
 #endif /* CFG_SYS_RAMBOOT */
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED	200000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_OFFSET	0x3000
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS		1
-#define CONFIG_I2C_MUX
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_NUM_I2C_BUSES	4
+#define CONFIG_SYS_I2C_MAX_HOPS		1
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	200000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	200000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_BUSES	{{0, {I2C_NULL_HOP} }, \
+		{0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
+		{0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
+		{1, {I2C_NULL_HOP} } }
 
 /* I2C SYSMON (LM75, AD7414 is almost compatible) */
 #define CONFIG_DTT_LM75		/* ON Semi's LM75 */
@@ -219,7 +226,7 @@
 #define CONFIG_SYS_DTT_MAX_TEMP	70
 #define CONFIG_SYS_DTT_LOW_TEMP	-30
 #define CONFIG_SYS_DTT_HYSTERESIS	3
-#define CONFIG_SYS_DTT_BUS_NUM		(CONFIG_SYS_MAX_I2C_BUS)
+#define CONFIG_SYS_DTT_BUS_NUM		1
 
 #if defined(CONFIG_CMD_NAND)
 #define CONFIG_NAND_KMETER1
@@ -315,7 +322,7 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	CONFIG_KM_DEF_ENV						\
 	CONFIG_KM_DEF_ARCH						\
-	"EEprom_ivm=pca9547:70:9\0"					\
+	"EEprom_ivm=2\0"						\
 	"newenv="							\
 		"prot off 0xF00C0000 +0x40000 && "			\
 		"era 0xF00C0000 +0x40000\0"				\
diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h
index 3c7a85e359..517d6f3dcb 100644
--- a/include/configs/mpc8308_p1m.h
+++ b/include/configs/mpc8308_p1m.h
@@ -327,13 +327,14 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_FSL_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED	400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_OFFSET	0x3000
-#define CONFIG_SYS_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 /*
  * General PCI
diff --git a/include/configs/mpq101.h b/include/configs/mpq101.h
index 339c736311..8ca3f76f03 100644
--- a/include/configs/mpq101.h
+++ b/include/configs/mpq101.h
@@ -221,13 +221,15 @@
 /*
  * I2C buses and peripherals
  */
-#define CONFIG_FSL_I2C         /* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C        /* I2C with hardware support*/
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED   400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE   0x7f
-#define CONFIG_SYS_I2C_OFFSET  0x3000
-#define CONFIG_SYS_I2C2_OFFSET 0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /* I2C RTC - M41T81 */
 #define CONFIG_RTC_M41T62
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index d0a6b1757f..1d1ad3debf 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -534,16 +534,16 @@
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
 
 /* I2C */
-#define CONFIG_FSL_I2C			/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C			/* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C spd and slave address */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x29} }
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x52
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES		{{0, 0x29}} /* Don't probe this addr */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
 #define CONFIG_SYS_SPD_BUS_NUM		1 /* For rom_loc and flash bank */
 
 /*
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index 7a79e8c212..9925d30341 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -304,14 +304,15 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
-#define CONFIG_HARD_I2C			/* I2C with hardware support*/
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C1_OFFSET	0x3000
-#define CONFIG_SYS_I2C2_OFFSET	0x3100
-#define CONFIG_SYS_I2C_OFFSET	CONFIG_SYS_I2C2_OFFSET
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69}, {1, 0x69} }
 /* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SYS_SPD_BUS_NUM... */
 
 /* TSEC */
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index 354691a364..e700436c53 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -444,12 +444,12 @@
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x3000
 
 /*
  * General PCI
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index 147e0ae83a..b83658de8e 100644
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -289,12 +289,12 @@
 /*
  * I2C
  */
-#define	CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define	CONFIG_HARD_I2C		/* I2C with hardware support*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /*
  * RapidIO MMU
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index 19869e613a..f1323eca2a 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -235,14 +235,14 @@
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define CONFIG_SYS_I2C_SPEED		102124	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	102124
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	102124
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 /* I2C RTC */
 #define CONFIG_RTC_RX8025		/* Use Epson rx8025 rtc via i2c	*/
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index b688b457d6..d7c079740e 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -178,17 +178,18 @@
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+
 #if 0
 #define CONFIG_SYS_I2C_NOPROBES        {0x00}  /* Don't probe these addrs */
 #else
 /* I did the 'if 0' so we could keep the syntax above if ever needed. */
 #undef CONFIG_SYS_I2C_NOPROBES
 #endif
-#define CONFIG_SYS_I2C_OFFSET		0x3000
 
 /* RapdIO Map configuration, mapped 1:1.
 */
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index 4c3c08622a..3e3ede42d7 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -198,12 +198,12 @@
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C			/* Use FSL common I2C driver */
-#define  CONFIG_HARD_I2C		/* I2C with hardware support*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
 #undef CONFIG_SYS_I2C_NOPROBES
-#define CONFIG_SYS_I2C_OFFSET		0x3000
 
 /* I2C RTC */
 #define CONFIG_RTC_DS1337		/* This is really a DS1339 RTC	*/
diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h
index 92b2179ca7..f7999fce0d 100644
--- a/include/configs/t4qds.h
+++ b/include/configs/t4qds.h
@@ -445,14 +445,15 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
 
 /* I2C */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x118000
-#define CONFIG_SYS_I2C2_OFFSET		0x118100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	100000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x118000
+#define CONFIG_SYS_FSL_I2C2_SPEED	100000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x118100
+
 #define I2C_MUX_PCA_ADDR_PRI		0x77 /* I2C bus multiplexer,primary */
 #define I2C_MUX_PCA_ADDR_SEC		0x76 /* I2C bus multiplexer,secondary */
 
diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h
index 54fbe8bdad..222f4ce2d4 100644
--- a/include/configs/vme8349.h
+++ b/include/configs/vme8349.h
@@ -237,16 +237,15 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS
 
 /* I2C */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#define CONFIG_FSL_I2C
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE	0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{ {0, 0x69} } /* Don't probe these addrs */
-#define CONFIG_SYS_I2C1_OFFSET	0x3000
-#define CONFIG_SYS_I2C2_OFFSET	0x3100
-#define CONFIG_SYS_I2C_OFFSET	CONFIG_SYS_I2C1_OFFSET
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 /* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SYS_SPD_BUS_NUM... */
 
 #define CONFIG_SYS_I2C_8574_ADDR2       0x20    /* I2C1, PCF8574 */
diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h
index f28f443fe9..719a4904d4 100644
--- a/include/configs/xpedite517x.h
+++ b/include/configs/xpedite517x.h
@@ -258,13 +258,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C				/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C				/* I2C with hardware support */
-#define CONFIG_SYS_I2C_SPEED		100000	/* M41T00 only supports 100 KHz */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	100000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	100000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 /* PEX8518 slave I2C interface */
 #define CONFIG_SYS_I2C_PEX8518_ADDR	0x70
diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h
index 3034a3c9a9..e55635c9d6 100644
--- a/include/configs/xpedite520x.h
+++ b/include/configs/xpedite520x.h
@@ -220,13 +220,14 @@
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C				/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C				/* I2C with hardware support */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 /* I2C EEPROM */
 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h
index 43359a2eef..bdfe0baa58 100644
--- a/include/configs/xpedite537x.h
+++ b/include/configs/xpedite537x.h
@@ -258,13 +258,15 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C				/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C				/* I2C with hardware support */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
+#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
 
 /* PEX8518 slave I2C interface */
 #define CONFIG_SYS_I2C_PEX8518_ADDR	0x70
diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h
index a171085354..a8be3f62ab 100644
--- a/include/configs/xpedite550x.h
+++ b/include/configs/xpedite550x.h
@@ -249,13 +249,14 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C				/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C				/* I2C with hardware support */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-#define CONFIG_SYS_I2C2_OFFSET		0x3100
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED	400000
+#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED	400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
 
 /* I2C DS7505 temperature sensor */
 #define CONFIG_DTT_LM75