redonkable
/
remarkable-uboot
1
0
Fork 0
Code Releases Activity

of: clean up OF_CONTROL ifdef conditionals 

We have flipped CONFIG_SPL_DISABLE_OF_CONTROL.  We have cleansing
devices, $(SPL_) and CONFIG_IS_ENABLED(), so we are ready to clear
away the ugly logic in include/fdtdec.h:

 #ifdef CONFIG_OF_CONTROL
 # if defined(CONFIG_SPL_BUILD) && !defined(SPL_OF_CONTROL)
 #  define OF_CONTROL 0
 # else
 #  define OF_CONTROL 1
 # endif
 #else
 # define OF_CONTROL 0
 #endif

Now CONFIG_IS_ENABLED(OF_CONTROL) is the substitute.  It refers to
CONFIG_OF_CONTROL for U-boot proper and CONFIG_SPL_OF_CONTROL for
SPL.

Also, we no longer have to cancel CONFIG_OF_CONTROL in
include/config_uncmd_spl.h and scripts/Makefile.spl.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
utp
Masahiro Yamada 2015-08-12 07:31:55 +09:00 committed by Tom Rini
parent dffb86e468
commit 0f9258228e
55 changed files with 74 additions and 99 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm/mach-exynos/include/mach/dwmmc.h
View File

@ -27,7 +27,5 @@
#define DWMCI_DIVRATIO_BIT 24
#define DWMCI_DIVRATIO_MASK 0x7
#ifdef CONFIG_OF_CONTROL
int exynos_dwmmc_init(const void *blob);
#endif
int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel);

2
arch/arm/mach-exynos/include/mach/mipi_dsim.h
View File

@ -374,7 +374,5 @@ void exynos_init_dsim_platform_data(vidinfo_t *vid);
/* panel driver init based on mipi dsi interface */
void s6e8ax0_init(void);
#ifdef CONFIG_OF_CONTROL
extern int mipi_power(void);
#endif
#endif /* _DSIM_H */

2
arch/arm/mach-exynos/include/mach/mmc.h
View File

@ -65,8 +65,6 @@ static inline int s5p_mmc_init(int index, int bus_width)
return s5p_sdhci_init(base, index, bus_width);
}
#ifdef CONFIG_OF_CONTROL
int exynos_mmc_init(const void *blob);
#endif
#endif

2
arch/arm/mach-exynos/pinmux.c
View File

@ -874,7 +874,7 @@ int exynos_pinmux_config(int peripheral, int flags)
return -1;
}
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
static int exynos4_pinmux_decode_periph_id(const void *blob, int node)
{
int err;

4
arch/arm/mach-tegra/clock.c
View File

@ -573,7 +573,7 @@ void clock_ll_start_uart(enum periph_id periph_id)
reset_set_enable(periph_id, 0);
}
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
int clock_decode_periph_id(const void *blob, int node)
{
enum periph_id id;
@ -588,7 +588,7 @@ int clock_decode_periph_id(const void *blob, int node)
assert(clock_periph_id_isvalid(id));
return id;
}
#endif /* CONFIG_OF_CONTROL */
#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
int clock_verify(void)
{

4
arch/arm/mach-tegra/tegra114/clock.c
View File

@ -582,7 +582,7 @@ void reset_set_enable(enum periph_id periph_id, int enable)
writel(reg, reset);
}
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
/*
* Convert a device tree clock ID to our peripheral ID. They are mostly
* the same but we are very cautious so we check that a valid clock ID is
@ -618,7 +618,7 @@ enum periph_id clk_id_to_periph_id(int clk_id)
return clk_id;
}
}
#endif /* CONFIG_OF_CONTROL */
#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
void clock_early_init(void)
{

4
arch/arm/mach-tegra/tegra124/clock.c
View File

@ -732,7 +732,7 @@ void reset_set_enable(enum periph_id periph_id, int enable)
writel(reg, reset);
}
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
/*
* Convert a device tree clock ID to our peripheral ID. They are mostly
* the same but we are very cautious so we check that a valid clock ID is
@ -798,7 +798,7 @@ enum periph_id clk_id_to_periph_id(int clk_id)
return clk_id;
}
}
#endif /* CONFIG_OF_CONTROL */
#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
void clock_early_init(void)
{

4
arch/arm/mach-tegra/tegra20/clock.c
View File

@ -507,7 +507,7 @@ void reset_set_enable(enum periph_id periph_id, int enable)
writel(reg, reset);
}
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
/*
* Convert a device tree clock ID to our peripheral ID. They are mostly
* the same but we are very cautious so we check that a valid clock ID is
@ -542,7 +542,7 @@ enum periph_id clk_id_to_periph_id(int clk_id)
return clk_id;
}
}
#endif /* CONFIG_OF_CONTROL */
#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
void clock_early_init(void)
{

4
arch/arm/mach-tegra/tegra30/clock.c
View File

@ -562,7 +562,7 @@ void reset_set_enable(enum periph_id periph_id, int enable)
writel(reg, reset);
}
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
/*
* Convert a device tree clock ID to our peripheral ID. They are mostly
* the same but we are very cautious so we check that a valid clock ID is
@ -600,7 +600,7 @@ enum periph_id clk_id_to_periph_id(int clk_id)
return clk_id;
}
}
#endif /* CONFIG_OF_CONTROL */
#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
void clock_early_init(void)
{

2
board/xilinx/microblaze-generic/microblaze-generic.c
View File

@ -24,7 +24,7 @@ DECLARE_GLOBAL_DATA_PTR;
static int reset_pin = -1;
#endif
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
ulong ram_base;
void dram_init_banksize(void)

2
board/xilinx/zynq/board.c
View File

@ -154,7 +154,7 @@ int board_mmc_init(bd_t *bd)
int dram_init(void)
{
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
int node;
fdt_addr_t addr;
fdt_size_t size;

4
common/cli.c
View File

@ -135,7 +135,7 @@ int do_run(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
}
#endif
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
bool cli_process_fdt(const char **cmdp)
{
/* Allow the fdt to override the boot command */
@ -196,7 +196,7 @@ err:
*/
hang();
}
#endif /* CONFIG_OF_CONTROL */
#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
void cli_loop(void)
{

3
common/spl/spl.c
View File

@ -157,8 +157,7 @@ int spl_init(void)
gd->malloc_limit = CONFIG_SYS_MALLOC_F_LEN;
gd->malloc_ptr = 0;
#endif
if (IS_ENABLED(CONFIG_OF_CONTROL) &&
IS_ENABLED(CONFIG_SPL_OF_CONTROL)) {
if (CONFIG_IS_ENABLED(OF_CONTROL)) {
ret = fdtdec_setup();
if (ret) {
debug("fdtdec_setup() returned error %d\n", ret);

2
drivers/core/Makefile
View File

@ -7,7 +7,7 @@
obj-y += device.o lists.o root.o uclass.o util.o
obj-$(CONFIG_DEVRES) += devres.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_OF_CONTROL) += simple-bus.o
obj-$(CONFIG_$(SPL_)OF_CONTROL) += simple-bus.o
endif
obj-$(CONFIG_$(SPL_)DM_DEVICE_REMOVE) += device-remove.o
obj-$(CONFIG_DM) += dump.o

4
drivers/core/device.c
View File

@ -59,7 +59,7 @@ int device_bind(struct udevice *parent, const struct driver *drv,
dev->seq = -1;
dev->req_seq = -1;
if (IS_ENABLED(CONFIG_OF_CONTROL) && IS_ENABLED(CONFIG_DM_SEQ_ALIAS)) {
if (CONFIG_IS_ENABLED(OF_CONTROL) && IS_ENABLED(CONFIG_DM_SEQ_ALIAS)) {
/*
* Some devices, such as a SPI bus, I2C bus and serial ports
* are numbered using aliases.
@ -561,7 +561,7 @@ const char *dev_get_uclass_name(struct udevice *dev)
fdt_addr_t dev_get_addr(struct udevice *dev)
{
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
fdt_addr_t addr;
addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg");

2
drivers/core/lists.c
View File

@ -99,7 +99,7 @@ int device_bind_driver_to_node(struct udevice *parent, const char *drv_name,
return 0;
}
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
/**
* driver_check_compatible() - Check if a driver is compatible with this node
*

6
drivers/core/root.c
View File

@ -114,7 +114,7 @@ int dm_init(void)
ret = device_bind_by_name(NULL, false, &root_info, &DM_ROOT_NON_CONST);
if (ret)
return ret;
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
DM_ROOT_NON_CONST->of_offset = 0;
#endif
ret = device_probe(DM_ROOT_NON_CONST);
@ -145,7 +145,7 @@ int dm_scan_platdata(bool pre_reloc_only)
return ret;
}
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
int dm_scan_fdt_node(struct udevice *parent, const void *blob, int offset,
bool pre_reloc_only)
{
@ -198,7 +198,7 @@ int dm_init_and_scan(bool pre_reloc_only)
return ret;
}
if (OF_CONTROL) {
if (CONFIG_IS_ENABLED(OF_CONTROL)) {
ret = dm_scan_fdt(gd->fdt_blob, pre_reloc_only);
if (ret) {
debug("dm_scan_fdt() failed: %d\n", ret);

2
drivers/gpio/mxc_gpio.c
View File

@ -336,7 +336,7 @@ U_BOOT_DRIVER(gpio_mxc) = {
.bind = mxc_gpio_bind,
};
#ifndef CONFIG_OF_CONTROL
#if !CONFIG_IS_ENABLED(OF_CONTROL)
static const struct mxc_gpio_plat mxc_plat[] = {
{ 0, (struct gpio_regs *)GPIO1_BASE_ADDR },
{ 1, (struct gpio_regs *)GPIO2_BASE_ADDR },

2
drivers/gpio/vybrid_gpio.c
View File

@ -135,7 +135,7 @@ static int vybrid_gpio_bind(struct udevice *dev)
return 0;
}
#ifndef CONFIG_OF_CONTROL
#if !CONFIG_IS_ENABLED(OF_CONTROL)
static const struct vybrid_gpio_platdata vybrid_gpio[] = {
{0, GPIO0_BASE_ADDR, "GPIO0 "},
{1, GPIO1_BASE_ADDR, "GPIO1 "},

4
drivers/i2c/s3c24x0_i2c.c
View File

@ -1002,7 +1002,7 @@ static int s3c24x0_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
}
}
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
static void process_nodes(const void *blob, int node_list[], int count,
int is_highspeed)
{
@ -1101,7 +1101,7 @@ int i2c_reset_port_fdt(const void *blob, int node)
return 0;
}
#endif /* CONFIG_OF_CONTROL */
#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
#ifdef CONFIG_EXYNOS5
static void exynos_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)

2
drivers/input/Makefile
View File

@ -14,4 +14,4 @@ obj-y += keyboard.o pc_keyb.o
obj-$(CONFIG_PS2MULT) += ps2mult.o ps2ser.o
endif
obj-y += input.o
obj-$(CONFIG_OF_CONTROL) += key_matrix.o
obj-$(CONFIG_$(SPL_)OF_CONTROL) += key_matrix.o

2
drivers/input/tegra-kbc.c
View File

@ -295,7 +295,7 @@ static int init_tegra_keyboard(struct stdio_dev *dev)
if (config.created)
return 0;
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
int node;
node = fdtdec_next_compatible(gd->fdt_blob, 0,

2
drivers/mmc/exynos_dw_mmc.c
View File

@ -158,7 +158,7 @@ int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel)
return exynos_dwmci_core_init(host, index);
}
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
static struct dwmci_host dwmci_host[DWMMC_MAX_CH_NUM];
static int do_dwmci_init(struct dwmci_host *host)

2
drivers/mmc/s5p_sdhci.c
View File

@ -96,7 +96,7 @@ int s5p_sdhci_init(u32 regbase, int index, int bus_width)
return s5p_sdhci_core_init(host);
}
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
struct sdhci_host sdhci_host[SDHCI_MAX_HOSTS];
static int do_sdhci_init(struct sdhci_host *host)

2
drivers/mmc/tegra_mmc.c
View File

@ -21,7 +21,7 @@ DECLARE_GLOBAL_DATA_PTR;
struct mmc_host mmc_host[CONFIG_SYS_MMC_MAX_DEVICE];
#ifndef CONFIG_OF_CONTROL
#if !CONFIG_IS_ENABLED(OF_CONTROL)
#error "Please enable device tree support to use this driver"
#endif

2
drivers/mmc/zynq_sdhci.c
View File

@ -33,7 +33,7 @@ int zynq_sdhci_init(phys_addr_t regbase)
return 0;
}
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
int zynq_sdhci_of_init(const void *blob)
{
int offset = 0;

6
drivers/mtd/spi/sf_probe.c
View File

@ -266,7 +266,7 @@ static int spi_flash_validate_params(struct spi_slave *spi, u8 *idcode,
return 0;
}
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
{
fdt_addr_t addr;
@ -292,7 +292,7 @@ int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
return 0;
}
#endif /* CONFIG_OF_CONTROL */
#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
/**
* spi_flash_probe_slave() - Probe for a SPI flash device on a bus
@ -347,7 +347,7 @@ int spi_flash_probe_slave(struct spi_slave *spi, struct spi_flash *flash)
}
}
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
if (spi_flash_decode_fdt(gd->fdt_blob, flash)) {
debug("SF: FDT decode error\n");
ret = -EINVAL;

2
drivers/net/xilinx_emaclite.c
View File

@ -361,7 +361,7 @@ int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr,
return 1;
}
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
int xilinx_emaclite_of_init(const void *blob)
{
int offset = 0;

2
drivers/net/zynq_gem.c
View File

@ -553,7 +553,7 @@ int zynq_gem_initialize(bd_t *bis, phys_addr_t base_addr,
return 1;
}
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
int zynq_gem_of_init(const void *blob)
{
int offset = 0;

2
drivers/power/exynos-tmu.c
View File

@ -180,7 +180,7 @@ enum tmu_status_t tmu_monitor(int *temp)
*/
static int get_tmu_fdt_values(struct tmu_info *info, const void *blob)
{
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
fdt_addr_t addr;
int node;
int error = 0;

4
drivers/power/pmic/pmic_max77686.c
View File

@ -256,7 +256,7 @@ int pmic_init(unsigned char bus)
{
static const char name[] = "MAX77686_PMIC";
struct pmic *p = pmic_alloc();
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
const void *blob = gd->fdt_blob;
int node, parent, tmp;
#endif
@ -266,7 +266,7 @@ int pmic_init(unsigned char bus)
return -ENOMEM;
}
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
node = fdtdec_next_compatible(blob, 0, COMPAT_MAXIM_MAX77686_PMIC);
if (node < 0) {
debug("PMIC: No node for PMIC Chip in device tree\n");

2
drivers/serial/ns16550.c
View File

@ -357,7 +357,7 @@ int ns16550_serial_probe(struct udevice *dev)
return 0;
}
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
int ns16550_serial_ofdata_to_platdata(struct udevice *dev)
{
struct ns16550_platdata *plat = dev->platdata;

4
drivers/serial/serial-uclass.c
View File

@ -32,7 +32,7 @@ static void serial_find_console_or_panic(void)
struct udevice *dev;
int node;
if (OF_CONTROL && gd->fdt_blob) {
if (CONFIG_IS_ENABLED(OF_CONTROL) && gd->fdt_blob) {
/* Check for a chosen console */
node = fdtdec_get_chosen_node(gd->fdt_blob, "stdout-path");
if (node < 0)
@ -55,7 +55,7 @@ static void serial_find_console_or_panic(void)
}
}
}
if (!SPL_BUILD || !OF_CONTROL || !gd->fdt_blob) {
if (!SPL_BUILD || !CONFIG_IS_ENABLED(OF_CONTROL) || !gd->fdt_blob) {
/*
* Try to use CONFIG_CONS_INDEX if available (it is numbered
* from 1!).

2
drivers/serial/serial_omap.c
View File

@ -12,7 +12,7 @@
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
static const struct udevice_id omap_serial_ids[] = {
{ .compatible = "ti,omap3-uart" },
{ .compatible = "ti,omap4-uart" },

2
drivers/serial/serial_pl01x.c
View File

@ -353,7 +353,7 @@ static const struct dm_serial_ops pl01x_serial_ops = {
.setbrg = pl01x_serial_setbrg,
};
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
static const struct udevice_id pl01x_serial_id[] ={
{.compatible = "arm,pl011", .data = TYPE_PL011},
{.compatible = "arm,pl010", .data = TYPE_PL010},

4
drivers/serial/serial_tegra.c
View File

@ -9,7 +9,7 @@
#include <ns16550.h>
#include <serial.h>
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
static const struct udevice_id tegra_serial_ids[] = {
{ .compatible = "nvidia,tegra20-uart" },
{ }
@ -42,7 +42,7 @@ U_BOOT_DEVICE(ns16550_serial) = {
U_BOOT_DRIVER(serial_ns16550) = {
.name = "serial_tegra20",
.id = UCLASS_SERIAL,
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
.of_match = tegra_serial_ids,
.ofdata_to_platdata = tegra_serial_ofdata_to_platdata,
.platdata_auto_alloc_size = sizeof(struct ns16550_platdata),

2
drivers/serial/serial_uniphier.c
View File

@ -113,7 +113,7 @@ static int uniphier_serial_remove(struct udevice *dev)
return 0;
}
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
static const struct udevice_id uniphier_uart_of_match[] = {
{ .compatible = "socionext,uniphier-uart" },
{ /* sentinel */ }

2
drivers/serial/serial_zynq.c
View File

@ -175,7 +175,7 @@ DECLARE_PSSERIAL_FUNCTIONS(1);
static struct serial_device uart_zynq_serial1_device =
INIT_PSSERIAL_STRUCTURE(1, "ttyPS1");
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
__weak struct serial_device *default_serial_console(void)
{
const void *blob = gd->fdt_blob;

2
drivers/sound/max98095.c
View File

@ -520,7 +520,7 @@ static int get_max98095_codec_values(struct sound_codec_info *pcodec_info,
const void *blob)
{
int error = 0;
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
enum fdt_compat_id compat;
int node;
int parent;

2
drivers/sound/wm8994.c
View File

@ -814,7 +814,7 @@ static int get_codec_values(struct sound_codec_info *pcodec_info,
const void *blob)
{
int error = 0;
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
enum fdt_compat_id compat;
int node;
int parent;

2
drivers/tpm/tpm_tis_i2c.c
View File

@ -585,7 +585,7 @@ static struct tpm_vendor_specific tpm_tis_i2c = {
static enum i2c_chip_type tpm_vendor_chip_type(void)
{
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
const void *blob = gd->fdt_blob;
if (fdtdec_next_compatible(blob, 0, COMPAT_INFINEON_SLB9645_TPM) >= 0)

2
drivers/video/exynos_dp_lowlevel.c
View File

@ -22,7 +22,7 @@ struct exynos_dp *dp_regs;
void exynos_dp_set_base_addr(void)
{
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
unsigned int node = fdtdec_next_compatible(gd->fdt_blob,
0, COMPAT_SAMSUNG_EXYNOS5_DP);
if (node <= 0)

8
drivers/video/exynos_fb.c
View File

@ -28,7 +28,7 @@ DECLARE_GLOBAL_DATA_PTR;
static unsigned int panel_width, panel_height;
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
vidinfo_t panel_info = {
/*
* Insert a value here so that we don't end up in the BSS
@ -126,7 +126,7 @@ static void lcd_panel_on(vidinfo_t *vid)
exynos_backlight_on(1);
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
node = fdtdec_next_compatible(gd->fdt_blob, 0,
COMPAT_SAMSUNG_EXYNOS_FIMD);
if (node <= 0) {
@ -150,7 +150,7 @@ static void lcd_panel_on(vidinfo_t *vid)
exynos_mipi_dsi_init();
}
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
int exynos_lcd_early_init(const void *blob)
{
unsigned int node;
@ -295,7 +295,7 @@ void lcd_ctrl_init(void *lcdbase)
set_system_display_ctrl();
set_lcd_clk();
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
#ifdef CONFIG_EXYNOS_MIPI_DSIM
exynos_init_dsim_platform_data(&panel_info);
#endif

4
drivers/video/exynos_fimd.c
View File

@ -251,7 +251,7 @@ void exynos_fimd_window_off(unsigned int win_id)
writel(cfg, &fimd_ctrl->winshmap);
}
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
/*
* The reset value for FIMD SYSMMU register MMU_CTRL is 3
* on Exynos5420 and newer versions.
@ -295,7 +295,7 @@ void exynos_fimd_lcd_init(vidinfo_t *vid)
{
unsigned int cfg = 0, rgb_mode;
unsigned int offset;
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
unsigned int node;
node = fdtdec_next_compatible(gd->fdt_blob,

4
drivers/video/exynos_mipi_dsi.c
View File

@ -28,7 +28,7 @@
DECLARE_GLOBAL_DATA_PTR;
static struct exynos_platform_mipi_dsim *dsim_pd;
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
static struct mipi_dsim_config dsim_config_dt;
static struct exynos_platform_mipi_dsim dsim_platform_data_dt;
static struct mipi_dsim_lcd_device mipi_lcd_device_dt;
@ -249,7 +249,7 @@ void exynos_set_dsim_platform_data(struct exynos_platform_mipi_dsim *pd)
dsim_pd = pd;
}
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
int exynos_dsim_config_parse_dt(const void *blob)
{
int node;

2
drivers/video/tegra.c
View File

@ -49,7 +49,7 @@ vidinfo_t panel_info = {
.vl_col = -1,
};
#ifndef CONFIG_OF_CONTROL
#if !CONFIG_IS_ENABLED(OF_CONTROL)
#error "You must enable CONFIG_OF_CONTROL to get Tegra LCD support"
#endif

2
include/cli.h
View File

@ -108,7 +108,7 @@ int cli_readline_into_buffer(const char *const prompt, char *buffer,
*/
int cli_simple_parse_line(char *line, char *argv[]);
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
/**
* cli_process_fdt() - process the boot command from the FDT
*

3
include/config_uncmd_spl.h
View File

@ -20,9 +20,6 @@
#undef CONFIG_CMD_SNTP
#undef CONFIG_CMD_TFTPPUT
#undef CONFIG_CMD_TFTPSRV
#ifndef CONFIG_SPL_OF_CONTROL
#undef CONFIG_OF_CONTROL
#endif
#ifndef CONFIG_SPL_DM
#undef CONFIG_DM_SERIAL

3
include/configs/microblaze-generic.h
View File

@ -106,7 +106,8 @@
# define CONFIG_XILINX_TB_WATCHDOG
#endif
#ifndef CONFIG_OF_CONTROL
#if !defined(CONFIG_OF_CONTROL) || \
(defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_OF_CONTROL))
/* ddr sdram - main memory */
# define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START
# define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE

2
include/configs/socfpga_common.h
View File

@ -214,7 +214,7 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
#define CONFIG_SPI_FLASH_BAR
#endif
#ifdef CONFIG_OF_CONTROL /* DW SPI is controlled via DT */
#if CONFIG_IS_ENABLED(OF_CONTROL) /* DW SPI is controlled via DT */
#define CONFIG_DESIGNWARE_SPI
#define CONFIG_CMD_SPI
#endif

4
include/dm/device.h
View File

@ -122,11 +122,11 @@ struct udevice_id {
ulong data;
};
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
#define of_match_ptr(_ptr) (_ptr)
#else
#define of_match_ptr(_ptr) NULL
#endif /* CONFIG_OF_CONTROL */
#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
/**
* struct driver - A driver for a feature or peripheral

10
include/fdtdec.h
View File

@ -45,16 +45,6 @@ struct fdt_memory {
#define SPL_BUILD 0
#endif
#ifdef CONFIG_OF_CONTROL
# if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_OF_CONTROL)
# define OF_CONTROL 0
# else
# define OF_CONTROL 1
# endif
#else
# define OF_CONTROL 0
#endif
/*
* Information about a resource. start is the first address of the resource
* and end is the last address (inclusive). The length of the resource will

11
lib/Makefile
View File

@ -26,8 +26,8 @@ obj-y += crc8.o
obj-y += crc16.o
obj-$(CONFIG_ERRNO_STR) += errno_str.o
obj-$(CONFIG_FIT) += fdtdec_common.o
obj-$(CONFIG_OF_CONTROL) += fdtdec_common.o
obj-$(CONFIG_OF_CONTROL) += fdtdec.o
obj-$(CONFIG_$(SPL_)OF_CONTROL) += fdtdec_common.o
obj-$(CONFIG_$(SPL_)OF_CONTROL) += fdtdec.o
obj-$(CONFIG_TEST_FDTDEC) += fdtdec_test.o
obj-$(CONFIG_GZIP) += gunzip.o
obj-$(CONFIG_GZIP_COMPRESSED) += gzip.o
@ -51,15 +51,12 @@ endif
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_OF_LIBFDT) += libfdt/
obj-$(CONFIG_OF_CONTROL) += fdtdec_common.o
obj-$(CONFIG_OF_CONTROL) += fdtdec.o
endif
ifdef CONFIG_SPL_OF_CONTROL
obj-$(CONFIG_OF_LIBFDT) += libfdt/
obj-$(CONFIG_OF_CONTROL) += fdtdec_common.o
obj-$(CONFIG_OF_CONTROL) += fdtdec.o
endif
obj-$(CONFIG_$(SPL_)OF_CONTROL) += fdtdec_common.o
obj-$(CONFIG_$(SPL_)OF_CONTROL) += fdtdec.o
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_SPL_YMODEM_SUPPORT) += crc16.o

2
lib/fdtdec.c
View File

@ -1140,7 +1140,7 @@ int fdtdec_decode_display_timing(const void *blob, int parent, int index,
int fdtdec_setup(void)
{
#ifdef CONFIG_OF_CONTROL
#if CONFIG_IS_ENABLED(OF_CONTROL)
# ifdef CONFIG_OF_EMBED
/* Get a pointer to the FDT */
gd->fdt_blob = __dtb_dt_begin;

3
scripts/Makefile.uncmd_spl
View File

@ -3,9 +3,6 @@
# TODO: Invent a better way
ifdef CONFIG_SPL_BUILD
ifndef CONFIG_SPL_OF_CONTROL
CONFIG_OF_CONTROL=
endif
ifndef CONFIG_SPL_DM
CONFIG_DM_SERIAL=