diff --git a/Kconfig b/Kconfig index d0318cc879..91a0618dbb 100644 --- a/Kconfig +++ b/Kconfig @@ -123,7 +123,9 @@ config FIT_SIGNATURE select RSA help This option enables signature verification of FIT uImages, - using a hash signed and verified using RSA. + using a hash signed and verified using RSA. If + CONFIG_SHA_PROG_HW_ACCEL is defined, i.e support for progressive + hashing is available using hardware, RSA library will use it. See doc/uImage.FIT/signature.txt for more details. config SYS_EXTRA_OPTIONS diff --git a/README b/README index ba57dc5617..febefb50c2 100644 --- a/README +++ b/README @@ -3152,8 +3152,18 @@ CBFS (Coreboot Filesystem) support Enable the hash verify command (hash -v). This adds to code size a little. - CONFIG_SHA1 - support SHA1 hashing - CONFIG_SHA256 - support SHA256 hashing + CONFIG_SHA1 - This option enables support of hashing using SHA1 + algorithm. The hash is calculated in software. + CONFIG_SHA256 - This option enables support of hashing using + SHA256 algorithm. The hash is calculated in software. + CONFIG_SHA_HW_ACCEL - This option enables hardware acceleration + for SHA1/SHA256 hashing. + This affects the 'hash' command and also the + hash_lookup_algo() function. + CONFIG_SHA_PROG_HW_ACCEL - This option enables + hardware-acceleration for SHA1/SHA256 progressive hashing. + Data can be streamed in a block at a time and the hashing + is performed in hardware. Note: There is also a sha1sum command, which should perhaps be deprecated in favour of 'hash sha1'. @@ -3447,8 +3457,10 @@ FIT uImage format: CONFIG_FIT_SIGNATURE This option enables signature verification of FIT uImages, - using a hash signed and verified using RSA. See - doc/uImage.FIT/signature.txt for more details. + using a hash signed and verified using RSA. If + CONFIG_SHA_PROG_HW_ACCEL is defined, i.e support for progressive + hashing is available using hardware, RSA library will use it. + See doc/uImage.FIT/signature.txt for more details. WARNING: When relying on signed FIT images with required signature check the legacy image format is default @@ -4916,6 +4928,9 @@ Low Level (hardware related) configuration options: - CONFIG_FSL_DDR_INTERACTIVE Enable interactive DDR debugging. See doc/README.fsl-ddr. +- CONFIG_FSL_DDR_SYNC_REFRESH + Enable sync of refresh for multiple controllers. + - CONFIG_SYS_83XX_DDR_USES_CS0 Only for 83xx systems. If specified, then DDR should be configured using CS0 and CS1 instead of CS2 and CS3. diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c index ce2d92f5a6..1a640bbb9c 100644 --- a/arch/arm/cpu/armv7/ls102xa/cpu.c +++ b/arch/arm/cpu/armv7/ls102xa/cpu.c @@ -8,14 +8,214 @@ #include #include #include +#include +#include #include #include #include #include "fsl_epu.h" +#define DCSR_RCPM2_BLOCK_OFFSET 0x223000 +#define DCSR_RCPM2_CPMFSMCR0 0x400 +#define DCSR_RCPM2_CPMFSMSR0 0x404 +#define DCSR_RCPM2_CPMFSMCR1 0x414 +#define DCSR_RCPM2_CPMFSMSR1 0x418 +#define CPMFSMSR_FSM_STATE_MASK 0x7f + DECLARE_GLOBAL_DATA_PTR; +#ifndef CONFIG_SYS_DCACHE_OFF + +/* + * Bit[1] of the descriptor indicates the descriptor type, + * and bit[0] indicates whether the descriptor is valid. + */ +#define PMD_TYPE_TABLE 0x3 +#define PMD_TYPE_SECT 0x1 + +/* AttrIndx[2:0] */ +#define PMD_ATTRINDX(t) ((t) << 2) + +/* Section */ +#define PMD_SECT_AF (1 << 10) + +#define BLOCK_SIZE_L1 (1UL << 30) +#define BLOCK_SIZE_L2 (1UL << 21) + +/* TTBCR flags */ +#define TTBCR_EAE (1 << 31) +#define TTBCR_T0SZ(x) ((x) << 0) +#define TTBCR_T1SZ(x) ((x) << 16) +#define TTBCR_USING_TTBR0 (TTBCR_T0SZ(0) | TTBCR_T1SZ(0)) +#define TTBCR_IRGN0_NC (0 << 8) +#define TTBCR_IRGN0_WBWA (1 << 8) +#define TTBCR_IRGN0_WT (2 << 8) +#define TTBCR_IRGN0_WBNWA (3 << 8) +#define TTBCR_IRGN0_MASK (3 << 8) +#define TTBCR_ORGN0_NC (0 << 10) +#define TTBCR_ORGN0_WBWA (1 << 10) +#define TTBCR_ORGN0_WT (2 << 10) +#define TTBCR_ORGN0_WBNWA (3 << 10) +#define TTBCR_ORGN0_MASK (3 << 10) +#define TTBCR_SHARED_NON (0 << 12) +#define TTBCR_SHARED_OUTER (2 << 12) +#define TTBCR_SHARED_INNER (3 << 12) +#define TTBCR_EPD0 (0 << 7) +#define TTBCR (TTBCR_SHARED_NON | \ + TTBCR_ORGN0_NC | \ + TTBCR_IRGN0_NC | \ + TTBCR_USING_TTBR0 | \ + TTBCR_EAE) + +/* + * Memory region attributes for LPAE (defined in pgtable): + * + * n = AttrIndx[2:0] + * + * n MAIR + * UNCACHED 000 00000000 + * BUFFERABLE 001 01000100 + * DEV_WC 001 01000100 + * WRITETHROUGH 010 10101010 + * WRITEBACK 011 11101110 + * DEV_CACHED 011 11101110 + * DEV_SHARED 100 00000100 + * DEV_NONSHARED 100 00000100 + * unused 101 + * unused 110 + * WRITEALLOC 111 11111111 + */ +#define MT_MAIR0 0xeeaa4400 +#define MT_MAIR1 0xff000004 +#define MT_STRONLY_ORDER 0 +#define MT_NORMAL_NC 1 +#define MT_DEVICE_MEM 4 +#define MT_NORMAL 7 + +/* The phy_addr must be aligned to 4KB */ +static inline void set_pgtable(u32 *page_table, u32 index, u32 phy_addr) +{ + u32 value = phy_addr | PMD_TYPE_TABLE; + + page_table[2 * index] = value; + page_table[2 * index + 1] = 0; +} + +/* The phy_addr must be aligned to 4KB */ +static inline void set_pgsection(u32 *page_table, u32 index, u64 phy_addr, + u32 memory_type) +{ + u64 value; + + value = phy_addr | PMD_TYPE_SECT | PMD_SECT_AF; + value |= PMD_ATTRINDX(memory_type); + page_table[2 * index] = value & 0xFFFFFFFF; + page_table[2 * index + 1] = (value >> 32) & 0xFFFFFFFF; +} + +/* + * Start MMU after DDR is available, we create MMU table in DRAM. + * The base address of TTLB is gd->arch.tlb_addr. We use two + * levels of translation tables here to cover 40-bit address space. + * + * The TTLBs are located at PHY 2G~4G. + * + * VA mapping: + * + * ------- <---- 0GB + * | | + * | | + * |-------| <---- 0x24000000 + * |///////| ===> 192MB VA map for PCIe1 with offset 0x40_0000_0000 + * |-------| <---- 0x300000000 + * | | + * |-------| <---- 0x34000000 + * |///////| ===> 192MB VA map for PCIe2 with offset 0x48_0000_0000 + * |-------| <---- 0x40000000 + * | | + * |-------| <---- 0x80000000 DDR0 space start + * |\\\\\\\| + *.|\\\\\\\| ===> 2GB VA map for 2GB DDR0 Memory space + * |\\\\\\\| + * ------- <---- 4GB DDR0 space end + */ +static void mmu_setup(void) +{ + u32 *level0_table = (u32 *)gd->arch.tlb_addr; + u32 *level1_table = (u32 *)(gd->arch.tlb_addr + 0x1000); + u64 va_start = 0; + u32 reg; + int i; + + /* Level 0 Table 2-3 are used to map DDR */ + set_pgsection(level0_table, 3, 3 * BLOCK_SIZE_L1, MT_NORMAL); + set_pgsection(level0_table, 2, 2 * BLOCK_SIZE_L1, MT_NORMAL); + /* Level 0 Table 1 is used to map device */ + set_pgsection(level0_table, 1, 1 * BLOCK_SIZE_L1, MT_DEVICE_MEM); + /* Level 0 Table 0 is used to map device including PCIe MEM */ + set_pgtable(level0_table, 0, (u32)level1_table); + + /* Level 1 has 512 entries */ + for (i = 0; i < 512; i++) { + /* Mapping for PCIe 1 */ + if (va_start >= CONFIG_SYS_PCIE1_VIRT_ADDR && + va_start < (CONFIG_SYS_PCIE1_VIRT_ADDR + + CONFIG_SYS_PCIE_MMAP_SIZE)) + set_pgsection(level1_table, i, + CONFIG_SYS_PCIE1_PHYS_BASE + va_start, + MT_DEVICE_MEM); + /* Mapping for PCIe 2 */ + else if (va_start >= CONFIG_SYS_PCIE2_VIRT_ADDR && + va_start < (CONFIG_SYS_PCIE2_VIRT_ADDR + + CONFIG_SYS_PCIE_MMAP_SIZE)) + set_pgsection(level1_table, i, + CONFIG_SYS_PCIE2_PHYS_BASE + va_start, + MT_DEVICE_MEM); + else + set_pgsection(level1_table, i, + va_start, + MT_DEVICE_MEM); + va_start += BLOCK_SIZE_L2; + } + + asm volatile("dsb sy;isb"); + asm volatile("mcr p15, 0, %0, c2, c0, 2" /* Write RT to TTBCR */ + : : "r" (TTBCR) : "memory"); + asm volatile("mcrr p15, 0, %0, %1, c2" /* TTBR 0 */ + : : "r" ((u32)level0_table), "r" (0) : "memory"); + asm volatile("mcr p15, 0, %0, c10, c2, 0" /* write MAIR 0 */ + : : "r" (MT_MAIR0) : "memory"); + asm volatile("mcr p15, 0, %0, c10, c2, 1" /* write MAIR 1 */ + : : "r" (MT_MAIR1) : "memory"); + + /* Set the access control to all-supervisor */ + asm volatile("mcr p15, 0, %0, c3, c0, 0" + : : "r" (~0)); + + /* Enable the mmu */ + reg = get_cr(); + set_cr(reg | CR_M); +} + +/* + * This function is called from lib/board.c. It recreates MMU + * table in main memory. MMU and i/d-cache are enabled here. + */ +void enable_caches(void) +{ + /* Invalidate all TLB */ + mmu_page_table_flush(gd->arch.tlb_addr, + gd->arch.tlb_addr + gd->arch.tlb_size); + /* Set up and enable mmu */ + mmu_setup(); + + /* Invalidate & Enable d-cache */ + invalidate_dcache_all(); + set_cr(get_cr() | CR_C); +} +#endif /* #ifndef CONFIG_SYS_DCACHE_OFF */ + #if defined(CONFIG_DISPLAY_CPUINFO) int print_cpuinfo(void) { @@ -78,16 +278,6 @@ int print_cpuinfo(void) } #endif -void enable_caches(void) -{ -#ifndef CONFIG_SYS_ICACHE_OFF - icache_enable(); -#endif -#ifndef CONFIG_SYS_DCACHE_OFF - dcache_enable(); -#endif -} - #ifdef CONFIG_FSL_ESDHC int cpu_mmc_init(bd_t *bis) { @@ -107,6 +297,27 @@ int cpu_eth_init(bd_t *bis) int arch_cpu_init(void) { void *epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET); + void *rcpm2_base = + (void *)(CONFIG_SYS_DCSRBAR + DCSR_RCPM2_BLOCK_OFFSET); + u32 state; + + /* + * The RCPM FSM state may not be reset after power-on. + * So, reset them. + */ + state = in_be32(rcpm2_base + DCSR_RCPM2_CPMFSMSR0) & + CPMFSMSR_FSM_STATE_MASK; + if (state != 0) { + out_be32(rcpm2_base + DCSR_RCPM2_CPMFSMCR0, 0x80); + out_be32(rcpm2_base + DCSR_RCPM2_CPMFSMCR0, 0x0); + } + + state = in_be32(rcpm2_base + DCSR_RCPM2_CPMFSMSR1) & + CPMFSMSR_FSM_STATE_MASK; + if (state != 0) { + out_be32(rcpm2_base + DCSR_RCPM2_CPMFSMCR1, 0x80); + out_be32(rcpm2_base + DCSR_RCPM2_CPMFSMCR1, 0x0); + } /* * After wakeup from deep sleep, Clear EPU registers diff --git a/arch/arm/cpu/armv8/cache.S b/arch/arm/cpu/armv8/cache.S index 9c6e8243bb..fa447bce16 100644 --- a/arch/arm/cpu/armv8/cache.S +++ b/arch/arm/cpu/armv8/cache.S @@ -155,3 +155,9 @@ ENTRY(__asm_invalidate_icache_all) isb sy ret ENDPROC(__asm_invalidate_icache_all) + +ENTRY(__asm_flush_l3_cache) + mov x0, #0 /* return status as success */ + ret +ENDPROC(__asm_flush_l3_cache) + .weak __asm_flush_l3_cache diff --git a/arch/arm/cpu/armv8/cache_v8.c b/arch/arm/cpu/armv8/cache_v8.c index 9dbcdf22af..c5ec5297cd 100644 --- a/arch/arm/cpu/armv8/cache_v8.c +++ b/arch/arm/cpu/armv8/cache_v8.c @@ -73,17 +73,21 @@ void invalidate_dcache_all(void) __asm_invalidate_dcache_all(); } -void __weak flush_l3_cache(void) -{ -} - /* - * Performs a clean & invalidation of the entire data cache at all levels + * Performs a clean & invalidation of the entire data cache at all levels. + * This function needs to be inline to avoid using stack. + * __asm_flush_l3_cache return status of timeout */ -void flush_dcache_all(void) +inline void flush_dcache_all(void) { + int ret; + __asm_flush_dcache_all(); - flush_l3_cache(); + ret = __asm_flush_l3_cache(); + if (ret) + debug("flushing dcache returns 0x%x\n", ret); + else + debug("flushing dcache successfully.\n"); } /* diff --git a/arch/arm/cpu/armv8/fsl-lsch3/cpu.c b/arch/arm/cpu/armv8/fsl-lsch3/cpu.c index 47b947f44f..49974878b9 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/cpu.c +++ b/arch/arm/cpu/armv8/fsl-lsch3/cpu.c @@ -10,10 +10,10 @@ #include #include #include +#include #include "cpu.h" #include "mp.h" #include "speed.h" -#include DECLARE_GLOBAL_DATA_PTR; @@ -150,7 +150,7 @@ static inline void final_mmu_setup(void) * set level 2 table 0 to cache-inhibit, covering 0 to 1GB */ section_l1t0 = 0; - section_l1t1 = BLOCK_SIZE_L0; + section_l1t1 = BLOCK_SIZE_L0 | PMD_SECT_OUTER_SHARE; section_l2 = 0; for (i = 0; i < 512; i++) { set_pgtable_section(level1_table_0, i, section_l1t0, @@ -168,10 +168,10 @@ static inline void final_mmu_setup(void) (u64)level2_table_0 | PMD_TYPE_TABLE; level1_table_0[2] = 0x80000000 | PMD_SECT_AF | PMD_TYPE_SECT | - PMD_ATTRINDX(MT_NORMAL); + PMD_SECT_OUTER_SHARE | PMD_ATTRINDX(MT_NORMAL); level1_table_0[3] = 0xc0000000 | PMD_SECT_AF | PMD_TYPE_SECT | - PMD_ATTRINDX(MT_NORMAL); + PMD_SECT_OUTER_SHARE | PMD_ATTRINDX(MT_NORMAL); /* Rewrite table to enable cache */ set_pgtable_section(level2_table_0, @@ -242,59 +242,6 @@ int arch_cpu_init(void) return 0; } -/* - * flush_l3_cache - * Dickens L3 cache can be flushed by transitioning from FAM to SFONLY power - * state, by writing to HP-F P-state request register. - * Fixme: This function should moved to a common file if other SoCs also use - * the same Dickens. - */ -#define HNF0_PSTATE_REQ 0x04200010 -#define HNF1_PSTATE_REQ 0x04210010 -#define HNF2_PSTATE_REQ 0x04220010 -#define HNF3_PSTATE_REQ 0x04230010 -#define HNF4_PSTATE_REQ 0x04240010 -#define HNF5_PSTATE_REQ 0x04250010 -#define HNF6_PSTATE_REQ 0x04260010 -#define HNF7_PSTATE_REQ 0x04270010 -#define HNFPSTAT_MASK (0xFFFFFFFFFFFFFFFC) -#define HNFPSTAT_FAM 0x3 -#define HNFPSTAT_SFONLY 0x01 - -static void hnf_pstate_req(u64 *ptr, u64 state) -{ - int timeout = 1000; - out_le64(ptr, (in_le64(ptr) & HNFPSTAT_MASK) | (state & 0x3)); - ptr++; - /* checking if the transition is completed */ - while (timeout > 0) { - if (((in_le64(ptr) & 0x0c) >> 2) == (state & 0x3)) - break; - udelay(100); - timeout--; - } -} - -void flush_l3_cache(void) -{ - hnf_pstate_req((u64 *)HNF0_PSTATE_REQ, HNFPSTAT_SFONLY); - hnf_pstate_req((u64 *)HNF1_PSTATE_REQ, HNFPSTAT_SFONLY); - hnf_pstate_req((u64 *)HNF2_PSTATE_REQ, HNFPSTAT_SFONLY); - hnf_pstate_req((u64 *)HNF3_PSTATE_REQ, HNFPSTAT_SFONLY); - hnf_pstate_req((u64 *)HNF4_PSTATE_REQ, HNFPSTAT_SFONLY); - hnf_pstate_req((u64 *)HNF5_PSTATE_REQ, HNFPSTAT_SFONLY); - hnf_pstate_req((u64 *)HNF6_PSTATE_REQ, HNFPSTAT_SFONLY); - hnf_pstate_req((u64 *)HNF7_PSTATE_REQ, HNFPSTAT_SFONLY); - hnf_pstate_req((u64 *)HNF0_PSTATE_REQ, HNFPSTAT_FAM); - hnf_pstate_req((u64 *)HNF1_PSTATE_REQ, HNFPSTAT_FAM); - hnf_pstate_req((u64 *)HNF2_PSTATE_REQ, HNFPSTAT_FAM); - hnf_pstate_req((u64 *)HNF3_PSTATE_REQ, HNFPSTAT_FAM); - hnf_pstate_req((u64 *)HNF4_PSTATE_REQ, HNFPSTAT_FAM); - hnf_pstate_req((u64 *)HNF5_PSTATE_REQ, HNFPSTAT_FAM); - hnf_pstate_req((u64 *)HNF6_PSTATE_REQ, HNFPSTAT_FAM); - hnf_pstate_req((u64 *)HNF7_PSTATE_REQ, HNFPSTAT_FAM); -} - /* * This function is called from lib/board.c. * It recreates MMU table in main memory. MMU and d-cache are enabled earlier. @@ -420,6 +367,7 @@ int print_cpuinfo(void) printf("\n Bus: %-4s MHz ", strmhz(buf, sysinfo.freq_systembus)); printf("DDR: %-4s MHz", strmhz(buf, sysinfo.freq_ddrbus)); + printf(" DP-DDR: %-4s MHz", strmhz(buf, sysinfo.freq_ddrbus2)); puts("\n"); return 0; diff --git a/arch/arm/cpu/armv8/fsl-lsch3/fdt.c b/arch/arm/cpu/armv8/fsl-lsch3/fdt.c index e392eb9149..7eb9b6aa4b 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/fdt.c +++ b/arch/arm/cpu/armv8/fsl-lsch3/fdt.c @@ -16,7 +16,7 @@ void ft_fixup_cpu(void *blob) __maybe_unused u64 spin_tbl_addr = (u64)get_spin_tbl_addr(); fdt32_t *reg; int addr_cells; - u64 val; + u64 val, core_id; size_t *boot_code_size = &(__secondary_boot_code_size); off = fdt_path_offset(blob, "/cpus"); @@ -29,15 +29,20 @@ void ft_fixup_cpu(void *blob) off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); while (off != -FDT_ERR_NOTFOUND) { reg = (fdt32_t *)fdt_getprop(blob, off, "reg", 0); + core_id = of_read_number(reg, addr_cells); if (reg) { - val = spin_tbl_addr; - val += id_to_core(of_read_number(reg, addr_cells)) - * SPIN_TABLE_ELEM_SIZE; - val = cpu_to_fdt64(val); - fdt_setprop_string(blob, off, "enable-method", - "spin-table"); - fdt_setprop(blob, off, "cpu-release-addr", - &val, sizeof(val)); + if (core_id == 0 || (is_core_online(core_id))) { + val = spin_tbl_addr; + val += id_to_core(core_id) * + SPIN_TABLE_ELEM_SIZE; + val = cpu_to_fdt64(val); + fdt_setprop_string(blob, off, "enable-method", + "spin-table"); + fdt_setprop(blob, off, "cpu-release-addr", + &val, sizeof(val)); + } else { + debug("skipping offline core\n"); + } } else { puts("Warning: found cpu node without reg property\n"); } @@ -55,4 +60,9 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CONFIG_MP ft_fixup_cpu(blob); #endif + +#ifdef CONFIG_SYS_NS16550 + do_fixup_by_compat_u32(blob, "ns16550", + "clock-frequency", CONFIG_SYS_NS16550_CLK, 1); +#endif } diff --git a/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S b/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S index 2a88aab283..886576ef99 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S +++ b/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S @@ -42,10 +42,142 @@ ENTRY(lowlevel_init) ldr x0, =secondary_boot_func blr x0 2: + +#ifdef CONFIG_FSL_TZPC_BP147 + /* Set Non Secure access for all devices protected via TZPC */ + ldr x1, =TZPCDECPROT_0_SET_BASE /* Decode Protection-0 Set Reg */ + orr w0, w0, #1 << 3 /* DCFG_RESET is accessible from NS world */ + str w0, [x1] + + isb + dsb sy +#endif + +#ifdef CONFIG_FSL_TZASC_400 + /* Set TZASC so that: + * a. We use only Region0 whose global secure write/read is EN + * b. We use only Region0 whose NSAID write/read is EN + * + * NOTE: As per the CCSR map doc, TZASC 3 and TZASC 4 are just + * placeholders. + */ + ldr x1, =TZASC_GATE_KEEPER(0) + ldr x0, [x1] /* Filter 0 Gate Keeper Register */ + orr x0, x0, #1 << 0 /* Set open_request for Filter 0 */ + str x0, [x1] + + ldr x1, =TZASC_GATE_KEEPER(1) + ldr x0, [x1] /* Filter 0 Gate Keeper Register */ + orr x0, x0, #1 << 0 /* Set open_request for Filter 0 */ + str x0, [x1] + + ldr x1, =TZASC_REGION_ATTRIBUTES_0(0) + ldr x0, [x1] /* Region-0 Attributes Register */ + orr x0, x0, #1 << 31 /* Set Sec global write en, Bit[31] */ + orr x0, x0, #1 << 30 /* Set Sec global read en, Bit[30] */ + str x0, [x1] + + ldr x1, =TZASC_REGION_ATTRIBUTES_0(1) + ldr x0, [x1] /* Region-1 Attributes Register */ + orr x0, x0, #1 << 31 /* Set Sec global write en, Bit[31] */ + orr x0, x0, #1 << 30 /* Set Sec global read en, Bit[30] */ + str x0, [x1] + + ldr x1, =TZASC_REGION_ID_ACCESS_0(0) + ldr w0, [x1] /* Region-0 Access Register */ + mov w0, #0xFFFFFFFF /* Set nsaid_wr_en and nsaid_rd_en */ + str w0, [x1] + + ldr x1, =TZASC_REGION_ID_ACCESS_0(1) + ldr w0, [x1] /* Region-1 Attributes Register */ + mov w0, #0xFFFFFFFF /* Set nsaid_wr_en and nsaid_rd_en */ + str w0, [x1] + + isb + dsb sy +#endif mov lr, x29 /* Restore LR */ ret ENDPROC(lowlevel_init) +hnf_pstate_poll: + /* x0 has the desired status, return 0 for success, 1 for timeout + * clobber x1, x2, x3, x4, x6, x7 + */ + mov x1, x0 + mov x7, #0 /* flag for timeout */ + mrs x3, cntpct_el0 /* read timer */ + add x3, x3, #1200 /* timeout after 100 microseconds */ + mov x0, #0x18 + movk x0, #0x420, lsl #16 /* HNF0_PSTATE_STATUS */ + mov w6, #8 /* HN-F node count */ +1: + ldr x2, [x0] + cmp x2, x1 /* check status */ + b.eq 2f + mrs x4, cntpct_el0 + cmp x4, x3 + b.ls 1b + mov x7, #1 /* timeout */ + b 3f +2: + add x0, x0, #0x10000 /* move to next node */ + subs w6, w6, #1 + cbnz w6, 1b +3: + mov x0, x7 + ret + +hnf_set_pstate: + /* x0 has the desired state, clobber x1, x2, x6 */ + mov x1, x0 + /* power state to SFONLY */ + mov w6, #8 /* HN-F node count */ + mov x0, #0x10 + movk x0, #0x420, lsl #16 /* HNF0_PSTATE_REQ */ +1: /* set pstate to sfonly */ + ldr x2, [x0] + and x2, x2, #0xfffffffffffffffc /* & HNFPSTAT_MASK */ + orr x2, x2, x1 + str x2, [x0] + add x0, x0, #0x10000 /* move to next node */ + subs w6, w6, #1 + cbnz w6, 1b + + ret + +ENTRY(__asm_flush_l3_cache) + /* + * Return status in x0 + * success 0 + * tmeout 1 for setting SFONLY, 2 for FAM, 3 for both + */ + mov x29, lr + mov x8, #0 + + dsb sy + mov x0, #0x1 /* HNFPSTAT_SFONLY */ + bl hnf_set_pstate + + mov x0, #0x4 /* SFONLY status */ + bl hnf_pstate_poll + cbz x0, 1f + mov x8, #1 /* timeout */ +1: + dsb sy + mov x0, #0x3 /* HNFPSTAT_FAM */ + bl hnf_set_pstate + + mov x0, #0xc /* FAM status */ + bl hnf_pstate_poll + cbz x0, 1f + add x8, x8, #0x2 +1: + mov x0, x8 + mov lr, x29 + ret +ENDPROC(__asm_flush_l3_cache) + /* Keep literals not used by the secondary boot code outside it */ .ltorg diff --git a/arch/arm/cpu/armv8/fsl-lsch3/mp.c b/arch/arm/cpu/armv8/fsl-lsch3/mp.c index 94998bf37b..ce9c0c1bdb 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/mp.c +++ b/arch/arm/cpu/armv8/fsl-lsch3/mp.c @@ -83,6 +83,14 @@ int is_core_valid(unsigned int core) return !!((1 << core) & cpu_mask()); } +int is_core_online(u64 cpu_id) +{ + u64 *table; + int pos = id_to_core(cpu_id); + table = (u64 *)get_spin_tbl_addr() + pos * WORDS_PER_SPIN_TABLE_ENTRY; + return table[SPIN_TABLE_ELEM_STATUS_IDX] == 1; +} + int cpu_reset(int nr) { puts("Feature is not implemented.\n"); diff --git a/arch/arm/cpu/armv8/fsl-lsch3/mp.h b/arch/arm/cpu/armv8/fsl-lsch3/mp.h index 06ac0bcf36..66144d6101 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/mp.h +++ b/arch/arm/cpu/armv8/fsl-lsch3/mp.h @@ -32,5 +32,6 @@ int fsl_lsch3_wake_seconday_cores(void); void *get_spin_tbl_addr(void); phys_addr_t determine_mp_bootpg(void); void secondary_boot_func(void); +int is_core_online(u64 cpu_id); #endif #endif /* _FSL_CH3_MP_H */ diff --git a/arch/arm/cpu/armv8/fsl-lsch3/speed.c b/arch/arm/cpu/armv8/fsl-lsch3/speed.c index dc4a34bce5..72cd999c5f 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/speed.c +++ b/arch/arm/cpu/armv8/fsl-lsch3/speed.c @@ -77,8 +77,10 @@ void get_sys_info(struct sys_info *sys_info) sys_info->freq_systembus = sysclk; #ifdef CONFIG_DDR_CLK_FREQ sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ; + sys_info->freq_ddrbus2 = CONFIG_DDR_CLK_FREQ; #else sys_info->freq_ddrbus = sysclk; + sys_info->freq_ddrbus2 = sysclk; #endif sys_info->freq_systembus *= (in_le32(&gur->rcwsr[0]) >> @@ -87,6 +89,9 @@ void get_sys_info(struct sys_info *sys_info) sys_info->freq_ddrbus *= (in_le32(&gur->rcwsr[0]) >> FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_SHIFT) & FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_MASK; + sys_info->freq_ddrbus2 *= (in_le32(&gur->rcwsr[0]) >> + FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_SHIFT) & + FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_MASK; for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) { /* @@ -129,7 +134,7 @@ int get_clocks(void) gd->cpu_clk = sys_info.freq_processor[0]; gd->bus_clk = sys_info.freq_systembus; gd->mem_clk = sys_info.freq_ddrbus; - + gd->arch.mem2_clk = sys_info.freq_ddrbus2; #if defined(CONFIG_FSL_ESDHC) gd->arch.sdhc_clk = gd->bus_clk / 2; #endif /* defined(CONFIG_FSL_ESDHC) */ @@ -156,11 +161,18 @@ ulong get_bus_freq(ulong dummy) * get_ddr_freq * return ddr bus freq in Hz *********************************************/ -ulong get_ddr_freq(ulong dummy) +ulong get_ddr_freq(ulong ctrl_num) { if (!gd->mem_clk) get_clocks(); + /* + * DDR controller 0 & 1 are on memory complex 0 + * DDR controler 2 is on memory complext 1 + */ + if (ctrl_num >= 2) + return gd->arch.mem2_clk; + return gd->mem_clk; } diff --git a/arch/arm/include/asm/arch-fsl-lsch3/config.h b/arch/arm/include/asm/arch-fsl-lsch3/config.h index da551e8839..b140c1fac2 100644 --- a/arch/arm/include/asm/arch-fsl-lsch3/config.h +++ b/arch/arm/include/asm/arch-fsl-lsch3/config.h @@ -30,11 +30,44 @@ #define CONFIG_SYS_FSL_PMU_CLTBENR (CONFIG_SYS_FSL_PMU_ADDR + \ 0x18A0) +#define CONFIG_SYS_FSL_DCSR_DDR_ADDR 0x70012c000ULL +#define CONFIG_SYS_FSL_DCSR_DDR2_ADDR 0x70012d000ULL +#define CONFIG_SYS_FSL_DCSR_DDR3_ADDR 0x700132000ULL +#define CONFIG_SYS_FSL_DCSR_DDR4_ADDR 0x700133000ULL + #define I2C1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01000000) #define I2C2_BASE_ADDR (CONFIG_SYS_IMMR + 0x01010000) #define I2C3_BASE_ADDR (CONFIG_SYS_IMMR + 0x01020000) #define I2C4_BASE_ADDR (CONFIG_SYS_IMMR + 0x01030000) +/* TZ Protection Controller Definitions */ +#define TZPC_BASE 0x02200000 +#define TZPCR0SIZE_BASE (TZPC_BASE) +#define TZPCDECPROT_0_STAT_BASE (TZPC_BASE + 0x800) +#define TZPCDECPROT_0_SET_BASE (TZPC_BASE + 0x804) +#define TZPCDECPROT_0_CLR_BASE (TZPC_BASE + 0x808) +#define TZPCDECPROT_1_STAT_BASE (TZPC_BASE + 0x80C) +#define TZPCDECPROT_1_SET_BASE (TZPC_BASE + 0x810) +#define TZPCDECPROT_1_CLR_BASE (TZPC_BASE + 0x814) +#define TZPCDECPROT_2_STAT_BASE (TZPC_BASE + 0x818) +#define TZPCDECPROT_2_SET_BASE (TZPC_BASE + 0x81C) +#define TZPCDECPROT_2_CLR_BASE (TZPC_BASE + 0x820) + +/* TZ Address Space Controller Definitions */ +#define TZASC1_BASE 0x01100000 /* as per CCSR map. */ +#define TZASC2_BASE 0x01110000 /* as per CCSR map. */ +#define TZASC3_BASE 0x01120000 /* as per CCSR map. */ +#define TZASC4_BASE 0x01130000 /* as per CCSR map. */ +#define TZASC_BUILD_CONFIG_REG(x) ((TZASC1_BASE + (x * 0x10000))) +#define TZASC_ACTION_REG(x) ((TZASC1_BASE + (x * 0x10000)) + 0x004) +#define TZASC_GATE_KEEPER(x) ((TZASC1_BASE + (x * 0x10000)) + 0x008) +#define TZASC_REGION_BASE_LOW_0(x) ((TZASC1_BASE + (x * 0x10000)) + 0x100) +#define TZASC_REGION_BASE_HIGH_0(x) ((TZASC1_BASE + (x * 0x10000)) + 0x104) +#define TZASC_REGION_TOP_LOW_0(x) ((TZASC1_BASE + (x * 0x10000)) + 0x108) +#define TZASC_REGION_TOP_HIGH_0(x) ((TZASC1_BASE + (x * 0x10000)) + 0x10C) +#define TZASC_REGION_ATTRIBUTES_0(x) ((TZASC1_BASE + (x * 0x10000)) + 0x110) +#define TZASC_REGION_ID_ACCESS_0(x) ((TZASC1_BASE + (x * 0x10000)) + 0x114) + /* Generic Interrupt Controller Definitions */ #define GICD_BASE 0x06000000 #define GICR_BASE 0x06100000 @@ -68,4 +101,9 @@ #error SoC not defined #endif +#ifdef CONFIG_LS2085A +#define CONFIG_SYS_FSL_ERRATUM_A008336 +#define CONFIG_SYS_FSL_ERRATUM_A008514 +#endif + #endif /* _ASM_ARMV8_FSL_LSCH3_CONFIG_ */ diff --git a/arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h index ee1d6512d9..dd11ef79c8 100644 --- a/arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h @@ -15,6 +15,7 @@ struct sys_info { unsigned long freq_processor[CONFIG_MAX_CPUS]; unsigned long freq_systembus; unsigned long freq_ddrbus; + unsigned long freq_ddrbus2; unsigned long freq_localbus; unsigned long freq_qe; #ifdef CONFIG_SYS_DPAA_FMAN @@ -60,6 +61,8 @@ struct ccsr_gur { #define FSL_CHASSIS3_RCWSR0_SYS_PLL_RAT_MASK 0x1f #define FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_SHIFT 10 #define FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_MASK 0x3f +#define FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_SHIFT 18 +#define FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_MASK 0x3f u8 res_180[0x200-0x180]; u32 scratchrw[32]; /* Scratch Read/Write */ u8 res_280[0x300-0x280]; diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index 791551841c..3b6a1696d8 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -36,6 +36,7 @@ #define CONFIG_SYS_LS102XA_USB1_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_LS102XA_USB1_OFFSET) +#define CONFIG_SYS_FSL_SEC_OFFSET 0x00700000 #define CONFIG_SYS_LS102XA_USB1_OFFSET 0x07600000 #define CONFIG_SYS_TSEC1_OFFSET 0x01d10000 #define CONFIG_SYS_TSEC2_OFFSET 0x01d50000 @@ -61,6 +62,20 @@ #define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_IMMR + 0x2400000) #define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_IMMR + 0x2500000) +#define CONFIG_SYS_PCIE1_PHYS_BASE 0x4000000000ULL +#define CONFIG_SYS_PCIE2_PHYS_BASE 0x4800000000ULL +#define CONFIG_SYS_PCIE1_VIRT_ADDR 0x24000000UL +#define CONFIG_SYS_PCIE2_VIRT_ADDR 0x34000000UL +#define CONFIG_SYS_PCIE_MMAP_SIZE (192 * 1024 * 1024) /* 192M */ +/* + * TLB will map VIRT_ADDR to (PHYS_BASE + VIRT_ADDR) + * So 40bit PCIe PHY addr can directly be converted to a 32bit virtual addr. + */ +#define CONFIG_SYS_PCIE1_PHYS_ADDR (CONFIG_SYS_PCIE1_PHYS_BASE + \ + CONFIG_SYS_PCIE1_VIRT_ADDR) +#define CONFIG_SYS_PCIE2_PHYS_ADDR (CONFIG_SYS_PCIE2_PHYS_BASE + \ + CONFIG_SYS_PCIE2_VIRT_ADDR) + #ifdef CONFIG_DDR_SPD #define CONFIG_SYS_FSL_DDR_BE #define CONFIG_VERY_BIG_RAM diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h index f70d568d46..3a64afce46 100644 --- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h +++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h @@ -37,6 +37,43 @@ #define DCFG_DCSR_PORCR1 0 +/* + * Define default values for some CCSR macros to make header files cleaner + * + * To completely disable CCSR relocation in a board header file, define + * CONFIG_SYS_CCSR_DO_NOT_RELOCATE. This will force CONFIG_SYS_CCSRBAR_PHYS + * to a value that is the same as CONFIG_SYS_CCSRBAR. + */ + +#ifdef CONFIG_SYS_CCSRBAR_PHYS +#error "Do not define CONFIG_SYS_CCSRBAR_PHYS directly." +#endif + +#ifdef CONFIG_SYS_CCSR_DO_NOT_RELOCATE +#undef CONFIG_SYS_CCSRBAR_PHYS_HIGH +#undef CONFIG_SYS_CCSRBAR_PHYS_LOW +#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0 +#endif + +#ifndef CONFIG_SYS_CCSRBAR +#define CONFIG_SYS_CCSRBAR CONFIG_SYS_IMMR +#endif + +#ifndef CONFIG_SYS_CCSRBAR_PHYS_HIGH +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0xf +#else +#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0 +#endif +#endif + +#ifndef CONFIG_SYS_CCSRBAR_PHYS_LOW +#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_IMMR +#endif + +#define CONFIG_SYS_CCSRBAR_PHYS ((CONFIG_SYS_CCSRBAR_PHYS_HIGH * 1ull) << 32 | \ + CONFIG_SYS_CCSRBAR_PHYS_LOW) + struct sys_info { unsigned long freq_processor[CONFIG_MAX_CPUS]; unsigned long freq_systembus; @@ -133,8 +170,7 @@ struct ccsr_scfg { u32 pex1rdmmsgrqsr; u32 pex2rdmmsgrqsr; u32 spimsiclrcr; - u32 pex1mscportsr; - u32 pex2mscportsr; + u32 pexmscportsr[2]; u32 pex2pmwrcr; u32 resv5[24]; u32 mac1_streamid; diff --git a/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h b/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h index abd70fc706..fa571b3a38 100644 --- a/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h +++ b/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h @@ -7,11 +7,68 @@ #ifndef __FSL_LS102XA_STREAM_ID_H_ #define __FSL_LS102XA_STREAM_ID_H_ +#include + +#define SET_LIODN_ENTRY_1(name, idA, off, compatoff) \ + { .compat = name, \ + .id = { idA }, .num_ids = 1, \ + .reg_offset = off + CONFIG_SYS_IMMR, \ + .compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \ + } + +#define SET_LIODN_ENTRY_2(name, idA, idB, off, compatoff) \ + { .compat = name, \ + .id = { idA, idB }, .num_ids = 2, \ + .reg_offset = off + CONFIG_SYS_IMMR, \ + .compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \ + } + +/* + * handle both old and new versioned SEC properties: + * "fsl,secX.Y" became "fsl,sec-vX.Y" during development + */ +#define SET_SEC_JR_LIODN_ENTRY(jrnum, liodnA, liodnB) \ + SET_LIODN_ENTRY_2("fsl,sec4.0-job-ring", liodnA, liodnB, \ + offsetof(ccsr_sec_t, jrliodnr[jrnum].ls) + \ + CONFIG_SYS_FSL_SEC_OFFSET, \ + CONFIG_SYS_FSL_SEC_OFFSET + 0x1000 + 0x1000 * jrnum), \ + SET_LIODN_ENTRY_2("fsl,sec-v4.0-job-ring", liodnA, liodnB,\ + offsetof(ccsr_sec_t, jrliodnr[jrnum].ls) + \ + CONFIG_SYS_FSL_SEC_OFFSET, \ + CONFIG_SYS_FSL_SEC_OFFSET + 0x1000 + 0x1000 * jrnum) + +/* This is a bit evil since we treat rtic param as both a string & hex value */ +#define SET_SEC_RTIC_LIODN_ENTRY(rtic, liodnA) \ + SET_LIODN_ENTRY_1("fsl,sec4.0-rtic-memory", \ + liodnA, \ + offsetof(ccsr_sec_t, rticliodnr[0x##rtic-0xa].ls) + \ + CONFIG_SYS_FSL_SEC_OFFSET, \ + CONFIG_SYS_FSL_SEC_OFFSET + 0x6100 + 0x20 * (0x##rtic-0xa)), \ + SET_LIODN_ENTRY_1("fsl,sec-v4.0-rtic-memory", \ + liodnA, \ + offsetof(ccsr_sec_t, rticliodnr[0x##rtic-0xa].ls) + \ + CONFIG_SYS_FSL_SEC_OFFSET, \ + CONFIG_SYS_FSL_SEC_OFFSET + 0x6100 + 0x20 * (0x##rtic-0xa)) + +#define SET_SEC_DECO_LIODN_ENTRY(num, liodnA, liodnB) \ + SET_LIODN_ENTRY_2(NULL, liodnA, liodnB, \ + offsetof(ccsr_sec_t, decoliodnr[num].ls) + \ + CONFIG_SYS_FSL_SEC_OFFSET, 0) + +struct liodn_id_table { + const char *compat; + u32 id[2]; + u8 num_ids; + phys_addr_t compat_offset; + unsigned long reg_offset; +}; + struct smmu_stream_id { uint16_t offset; uint16_t stream_id; char dev_name[32]; }; +void ls1021x_config_caam_stream_id(struct liodn_id_table *tbl, int size); void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num); #endif diff --git a/arch/arm/include/asm/armv8/mmu.h b/arch/arm/include/asm/armv8/mmu.h index 4b7b67b643..4b9cb52965 100644 --- a/arch/arm/include/asm/armv8/mmu.h +++ b/arch/arm/include/asm/armv8/mmu.h @@ -65,7 +65,8 @@ /* * Section */ -#define PMD_SECT_S (3 << 8) +#define PMD_SECT_OUTER_SHARE (2 << 8) +#define PMD_SECT_INNER_SHARE (3 << 8) #define PMD_SECT_AF (1 << 10) #define PMD_SECT_NG (1 << 11) #define PMD_SECT_PXN (UL(1) << 53) diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index 438f128326..bb24f33d0d 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -48,6 +48,9 @@ struct arch_global_data { #ifdef CONFIG_OMAP struct omap_boot_parameters omap_boot_params; #endif +#ifdef CONFIG_FSL_LSCH3 + unsigned long mem2_clk; +#endif }; #include diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 7820486df0..2a5bed2e46 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -70,6 +70,7 @@ void __asm_invalidate_dcache_all(void); void __asm_flush_dcache_range(u64 start, u64 end); void __asm_invalidate_tlb_all(void); void __asm_invalidate_icache_all(void); +int __asm_flush_l3_cache(void); void armv8_switch_to_el2(void); void armv8_switch_to_el1(void); diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c index 0c1298a31e..2d6b676154 100644 --- a/arch/arm/lib/bootm.c +++ b/arch/arm/lib/bootm.c @@ -191,7 +191,7 @@ __weak void setup_board_tags(struct tag **in_params) {} static void do_nonsec_virt_switch(void) { smp_kick_all_cpus(); - flush_dcache_all(); /* flush cache before swtiching to EL2 */ + dcache_disable(); /* flush cache before swtiching to EL2 */ armv8_switch_to_el2(); #ifdef CONFIG_ARMV8_SWITCH_TO_EL1 armv8_switch_to_el1(); diff --git a/board/freescale/common/ls102xa_stream_id.c b/board/freescale/common/ls102xa_stream_id.c index 6154c9c458..f43426991b 100644 --- a/board/freescale/common/ls102xa_stream_id.c +++ b/board/freescale/common/ls102xa_stream_id.c @@ -16,3 +16,18 @@ void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num) for (i = 0; i < num; i++) out_be32(scfg + id[i].offset, id[i].stream_id); } + +void ls1021x_config_caam_stream_id(struct liodn_id_table *tbl, int size) +{ + int i; + u32 liodn; + + for (i = 0; i < size; i++) { + if (tbl[i].num_ids == 2) + liodn = (tbl[i].id[0] << 16) | tbl[i].id[1]; + else + liodn = tbl[i].id[0]; + + out_le32((uint32_t *)(tbl[i].reg_offset), liodn); + } +} diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index 20eade4651..722b88f1e9 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -509,6 +509,25 @@ static struct csu_ns_dev ns_dev[] = { }; #endif +struct liodn_id_table sec_liodn_tbl[] = { + SET_SEC_JR_LIODN_ENTRY(0, 0x10, 0x10), + SET_SEC_JR_LIODN_ENTRY(1, 0x10, 0x10), + SET_SEC_JR_LIODN_ENTRY(2, 0x10, 0x10), + SET_SEC_JR_LIODN_ENTRY(3, 0x10, 0x10), + SET_SEC_RTIC_LIODN_ENTRY(a, 0x10), + SET_SEC_RTIC_LIODN_ENTRY(b, 0x10), + SET_SEC_RTIC_LIODN_ENTRY(c, 0x10), + SET_SEC_RTIC_LIODN_ENTRY(d, 0x10), + SET_SEC_DECO_LIODN_ENTRY(0, 0x10, 0x10), + SET_SEC_DECO_LIODN_ENTRY(1, 0x10, 0x10), + SET_SEC_DECO_LIODN_ENTRY(2, 0x10, 0x10), + SET_SEC_DECO_LIODN_ENTRY(3, 0x10, 0x10), + SET_SEC_DECO_LIODN_ENTRY(4, 0x10, 0x10), + SET_SEC_DECO_LIODN_ENTRY(5, 0x10, 0x10), + SET_SEC_DECO_LIODN_ENTRY(6, 0x10, 0x10), + SET_SEC_DECO_LIODN_ENTRY(7, 0x10, 0x10), +}; + struct smmu_stream_id dev_stream_id[] = { { 0x100, 0x01, "ETSEC MAC1" }, { 0x104, 0x02, "ETSEC MAC2" }, @@ -541,6 +560,8 @@ int board_init(void) config_serdes_mux(); #endif + ls1021x_config_caam_stream_id(sec_liodn_tbl, + ARRAY_SIZE(sec_liodn_tbl)); ls102xa_config_smmu_stream_id(dev_stream_id, ARRAY_SIZE(dev_stream_id)); diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index bc8b00686c..fb8525fe59 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -401,6 +401,25 @@ static struct csu_ns_dev ns_dev[] = { }; #endif +struct liodn_id_table sec_liodn_tbl[] = { + SET_SEC_JR_LIODN_ENTRY(0, 0x10, 0x10), + SET_SEC_JR_LIODN_ENTRY(1, 0x10, 0x10), + SET_SEC_JR_LIODN_ENTRY(2, 0x10, 0x10), + SET_SEC_JR_LIODN_ENTRY(3, 0x10, 0x10), + SET_SEC_RTIC_LIODN_ENTRY(a, 0x10), + SET_SEC_RTIC_LIODN_ENTRY(b, 0x10), + SET_SEC_RTIC_LIODN_ENTRY(c, 0x10), + SET_SEC_RTIC_LIODN_ENTRY(d, 0x10), + SET_SEC_DECO_LIODN_ENTRY(0, 0x10, 0x10), + SET_SEC_DECO_LIODN_ENTRY(1, 0x10, 0x10), + SET_SEC_DECO_LIODN_ENTRY(2, 0x10, 0x10), + SET_SEC_DECO_LIODN_ENTRY(3, 0x10, 0x10), + SET_SEC_DECO_LIODN_ENTRY(4, 0x10, 0x10), + SET_SEC_DECO_LIODN_ENTRY(5, 0x10, 0x10), + SET_SEC_DECO_LIODN_ENTRY(6, 0x10, 0x10), + SET_SEC_DECO_LIODN_ENTRY(7, 0x10, 0x10), +}; + struct smmu_stream_id dev_stream_id[] = { { 0x100, 0x01, "ETSEC MAC1" }, { 0x104, 0x02, "ETSEC MAC2" }, @@ -427,6 +446,8 @@ int board_init(void) #endif #endif + ls1021x_config_caam_stream_id(sec_liodn_tbl, + ARRAY_SIZE(sec_liodn_tbl)); ls102xa_config_smmu_stream_id(dev_stream_id, ARRAY_SIZE(dev_stream_id)); diff --git a/board/freescale/ls2085a/ddr.c b/board/freescale/ls2085a/ddr.c index b4a3fc9a9e..4884fa24d0 100644 --- a/board/freescale/ls2085a/ddr.c +++ b/board/freescale/ls2085a/ddr.c @@ -77,6 +77,7 @@ found: popts->data_bus_width = 1; popts->otf_burst_chop_en = 0; popts->burst_length = DDR_BL8; + popts->bstopre = 0; /* enable auto precharge */ } /* * Factors to consider for half-strength driver enable: diff --git a/board/freescale/ls2085a/ls2085a.c b/board/freescale/ls2085a/ls2085a.c index 163a4c486a..519d61cb1e 100644 --- a/board/freescale/ls2085a/ls2085a.c +++ b/board/freescale/ls2085a/ls2085a.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include DECLARE_GLOBAL_DATA_PTR; @@ -59,8 +59,15 @@ int timer_init(void) u32 __iomem *cntcr = (u32 *)CONFIG_SYS_FSL_TIMER_ADDR; u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR; - out_le32(cltbenr, 0x1); /* enable cluster0 timebase */ - out_le32(cntcr, 0x1); /* enable clock for timer */ + /* Enable timebase for all clusters. + * It is safe to do so even some clusters are not enabled. + */ + out_le32(cltbenr, 0xf); + + /* Enable clock for timer + * This is a global setting. + */ + out_le32(cntcr, 0x1); return 0; } @@ -91,7 +98,21 @@ void fdt_fixup_board_enet(void *fdt) { int offset; - offset = fdt_path_offset(fdt, "/fsl,dprc@0"); + offset = fdt_path_offset(fdt, "/fsl-mc"); + + /* + * TODO: Remove this when backward compatibility + * with old DT node (fsl,dprc@0) is no longer needed. + */ + if (offset < 0) + offset = fdt_path_offset(fdt, "/fsl,dprc@0"); + + if (offset < 0) { + printf("%s: ERROR: fsl-mc node not found in device tree (error %d)\n", + __func__, offset); + return; + } + if (get_mc_boot_status() == 0) fdt_status_okay(fdt, offset); else diff --git a/common/cmd_blob.c b/common/cmd_blob.c index 82ecaf09e5..d3f22a1afc 100644 --- a/common/cmd_blob.c +++ b/common/cmd_blob.c @@ -90,17 +90,19 @@ static char blob_help_text[] = "enc src dst len km - Encapsulate and create blob of data\n" " $len bytes long at address $src and\n" " store the result at address $dst.\n" - " $km is the 16 byte key modifier\n" - " is also required for generation/use as\n" - " key for cryptographic operation. Key\n" - " modifier should be 16 byte long.\n" + " $km is the address where the key\n" + " modifier is stored.\n" + " The modifier is required for generation\n" + " /use as key for cryptographic operation.\n" + " Key modifier should be 16 byte long.\n" "blob dec src dst len km - Decapsulate the blob of data at address\n" " $src and store result of $len byte at\n" " addr $dst.\n" - " $km is the 16 byte key modifier\n" - " is also required for generation/use as\n" - " key for cryptographic operation. Key\n" - " modifier should be 16 byte long.\n"; + " $km is the address where the key\n" + " modifier is stored.\n" + " The modifier is required for generation\n" + " /use as key for cryptographic operation.\n" + " Key modifier should be 16 byte long.\n"; U_BOOT_CMD( blob, 6, 1, do_blob, diff --git a/common/hash.c b/common/hash.c index d154d029e9..9e9f84b9fb 100644 --- a/common/hash.c +++ b/common/hash.c @@ -127,11 +127,21 @@ static struct hash_algo hash_algo[] = { SHA1_SUM_LEN, hw_sha1, CHUNKSZ_SHA1, +#ifdef CONFIG_SHA_PROG_HW_ACCEL + hw_sha_init, + hw_sha_update, + hw_sha_finish, +#endif }, { "sha256", SHA256_SUM_LEN, hw_sha256, CHUNKSZ_SHA256, +#ifdef CONFIG_SHA_PROG_HW_ACCEL + hw_sha_init, + hw_sha_update, + hw_sha_finish, +#endif }, #endif #ifdef CONFIG_SHA1 diff --git a/doc/README.fsl-trustzone-components b/doc/README.fsl-trustzone-components new file mode 100644 index 0000000000..a3afd1f5f4 --- /dev/null +++ b/doc/README.fsl-trustzone-components @@ -0,0 +1,25 @@ +Freescale ARM64 SoCs like LS2085A have ARM TrustZone components like +TZPC-BP147 (TrustZone Protection Controller) and TZASC-400 (TrustZone +Address Space Controller). + +While most of the configuration related programming of these peripherals +is left to a root-of-trust security software layer (running in EL3 +privilege mode), but still some configurations of these peripherals +might be required while the bootloader is executing in EL3 privilege +mode. The following sections define how to turn on these features for +LS2085A like SoCs. + +TZPC-BP147 (TrustZone Protection Controller) +============================================ +- Depends on CONFIG_FSL_TZPC_BP147 configuration flag. +- Separates Secure World and Normal World on-chip RAM (OCRAM) spaces. +- Provides a programming model to set access control policy via the TZPC + TZDECPROT Registers. + +TZASC-400 (TrustZone Address Space Controller) +============================================== +- Depends on CONFIG_FSL_TZASC_400 configuration flag. +- Separates Secure World and Normal World external memory spaces for bus masters + such as processors and DMA-equipped peripherals. +- Supports 8 fully programmable address regions, initially inactive at reset, + and one base region, always active, that covers the remaining address space. diff --git a/drivers/crypto/fsl/fsl_blob.c b/drivers/crypto/fsl/fsl_blob.c index bc0107521c..9923bcbfe9 100644 --- a/drivers/crypto/fsl/fsl_blob.c +++ b/drivers/crypto/fsl/fsl_blob.c @@ -11,7 +11,7 @@ #include "desc.h" #include "jr.h" -int blob_decrypt(u8 *key_mod, u8 *src, u8 *dst, u8 len) +int blob_decap(u8 *key_mod, u8 *src, u8 *dst, u32 len) { int ret, i = 0; u32 *desc; @@ -36,7 +36,7 @@ int blob_decrypt(u8 *key_mod, u8 *src, u8 *dst, u8 len) return ret; } -int blob_encrypt(u8 *key_mod, u8 *src, u8 *dst, u8 len) +int blob_encap(u8 *key_mod, u8 *src, u8 *dst, u32 len) { int ret, i = 0; u32 *desc; diff --git a/drivers/crypto/fsl/fsl_hash.c b/drivers/crypto/fsl/fsl_hash.c index d77f2573d0..c298404f25 100644 --- a/drivers/crypto/fsl/fsl_hash.c +++ b/drivers/crypto/fsl/fsl_hash.c @@ -10,6 +10,9 @@ #include "jobdesc.h" #include "desc.h" #include "jr.h" +#include "fsl_hash.h" +#include +#include #define CRYPTO_MAX_ALG_NAME 80 #define SHA1_DIGEST_SIZE 20 @@ -39,6 +42,122 @@ static struct caam_hash_template driver_hash[] = { }, }; +static enum caam_hash_algos get_hash_type(struct hash_algo *algo) +{ + if (!strcmp(algo->name, driver_hash[SHA1].name)) + return SHA1; + else + return SHA256; +} + +/* Create the context for progressive hashing using h/w acceleration. + * + * @ctxp: Pointer to the pointer of the context for hashing + * @caam_algo: Enum for SHA1 or SHA256 + * @return 0 if ok, -ENOMEM on error + */ +static int caam_hash_init(void **ctxp, enum caam_hash_algos caam_algo) +{ + *ctxp = calloc(1, sizeof(struct sha_ctx)); + if (*ctxp == NULL) { + debug("Cannot allocate memory for context\n"); + return -ENOMEM; + } + return 0; +} + +/* + * Update sg table for progressive hashing using h/w acceleration + * + * The context is freed by this function if an error occurs. + * We support at most 32 Scatter/Gather Entries. + * + * @hash_ctx: Pointer to the context for hashing + * @buf: Pointer to the buffer being hashed + * @size: Size of the buffer being hashed + * @is_last: 1 if this is the last update; 0 otherwise + * @caam_algo: Enum for SHA1 or SHA256 + * @return 0 if ok, -EINVAL on error + */ +static int caam_hash_update(void *hash_ctx, const void *buf, + unsigned int size, int is_last, + enum caam_hash_algos caam_algo) +{ + uint32_t final = 0; + dma_addr_t addr = virt_to_phys((void *)buf); + struct sha_ctx *ctx = hash_ctx; + + if (ctx->sg_num >= MAX_SG_32) { + free(ctx); + return -EINVAL; + } + +#ifdef CONFIG_PHYS_64BIT + ctx->sg_tbl[ctx->sg_num].addr_hi = addr >> 32; +#else + ctx->sg_tbl[ctx->sg_num].addr_hi = 0x0; +#endif + ctx->sg_tbl[ctx->sg_num].addr_lo = addr; + + sec_out32(&ctx->sg_tbl[ctx->sg_num].len_flag, + (size & SG_ENTRY_LENGTH_MASK)); + + ctx->sg_num++; + + if (is_last) { + final = sec_in32(&ctx->sg_tbl[ctx->sg_num - 1].len_flag) | + SG_ENTRY_FINAL_BIT; + sec_out32(&ctx->sg_tbl[ctx->sg_num - 1].len_flag, final); + } + + return 0; +} + +/* + * Perform progressive hashing on the given buffer and copy hash at + * destination buffer + * + * The context is freed after completion of hash operation. + * + * @hash_ctx: Pointer to the context for hashing + * @dest_buf: Pointer to the destination buffer where hash is to be copied + * @size: Size of the buffer being hashed + * @caam_algo: Enum for SHA1 or SHA256 + * @return 0 if ok, -EINVAL on error + */ +static int caam_hash_finish(void *hash_ctx, void *dest_buf, + int size, enum caam_hash_algos caam_algo) +{ + uint32_t len = 0; + struct sha_ctx *ctx = hash_ctx; + int i = 0, ret = 0; + + if (size < driver_hash[caam_algo].digestsize) { + free(ctx); + return -EINVAL; + } + + for (i = 0; i < ctx->sg_num; i++) + len += (sec_in32(&ctx->sg_tbl[i].len_flag) & + SG_ENTRY_LENGTH_MASK); + + inline_cnstr_jobdesc_hash(ctx->sha_desc, (uint8_t *)ctx->sg_tbl, len, + ctx->hash, + driver_hash[caam_algo].alg_type, + driver_hash[caam_algo].digestsize, + 1); + + ret = run_descriptor_jr(ctx->sha_desc); + + if (ret) + debug("Error %x\n", ret); + else + memcpy(dest_buf, ctx->hash, sizeof(ctx->hash)); + + free(ctx); + return ret; +} + int caam_hash(const unsigned char *pbuf, unsigned int buf_len, unsigned char *pout, enum caam_hash_algos algo) { @@ -48,7 +167,7 @@ int caam_hash(const unsigned char *pbuf, unsigned int buf_len, desc = malloc(sizeof(int) * MAX_CAAM_DESCSIZE); if (!desc) { debug("Not enough memory for descriptor allocation\n"); - return -1; + return -ENOMEM; } inline_cnstr_jobdesc_hash(desc, pbuf, buf_len, pout, @@ -75,3 +194,20 @@ void hw_sha1(const unsigned char *pbuf, unsigned int buf_len, if (caam_hash(pbuf, buf_len, pout, SHA1)) printf("CAAM was not setup properly or it is faulty\n"); } + +int hw_sha_init(struct hash_algo *algo, void **ctxp) +{ + return caam_hash_init(ctxp, get_hash_type(algo)); +} + +int hw_sha_update(struct hash_algo *algo, void *ctx, const void *buf, + unsigned int size, int is_last) +{ + return caam_hash_update(ctx, buf, size, is_last, get_hash_type(algo)); +} + +int hw_sha_finish(struct hash_algo *algo, void *ctx, void *dest_buf, + int size) +{ + return caam_hash_finish(ctx, dest_buf, size, get_hash_type(algo)); +} diff --git a/drivers/crypto/fsl/fsl_hash.h b/drivers/crypto/fsl/fsl_hash.h new file mode 100644 index 0000000000..f5be651d7a --- /dev/null +++ b/drivers/crypto/fsl/fsl_hash.h @@ -0,0 +1,34 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + */ + +#ifndef _SHA_H +#define _SHA_H + +#include +#include +#include "jr.h" + +/* We support at most 32 Scatter/Gather Entries.*/ +#define MAX_SG_32 32 + +/* + * Hash context contains the following fields + * @sha_desc: Sha Descriptor + * @sg_num: number of entries in sg table + * @len: total length of buffer + * @sg_tbl: sg entry table + * @hash: index to the hash calculated + */ +struct sha_ctx { + uint32_t sha_desc[64]; + uint32_t sg_num; + uint32_t len; + struct sg_entry sg_tbl[MAX_SG_32]; + u8 hash[HASH_MAX_DIGEST_SIZE]; +}; + +#endif diff --git a/drivers/ddr/fsl/arm_ddr_gen3.c b/drivers/ddr/fsl/arm_ddr_gen3.c index c139da6da9..7160da4ec8 100644 --- a/drivers/ddr/fsl/arm_ddr_gen3.c +++ b/drivers/ddr/fsl/arm_ddr_gen3.c @@ -222,7 +222,7 @@ step2: bus_width = 3 - ((ddr_in32(&ddr->sdram_cfg) & SDRAM_CFG_DBW_MASK) >> SDRAM_CFG_DBW_SHIFT); timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 / - (get_ddr_freq(0) >> 20)) << 1; + (get_ddr_freq(ctrl_num) >> 20)) << 1; total_gb_size_per_controller >>= 4; /* shift down to gb size */ debug("total %d GB\n", total_gb_size_per_controller); debug("Need to wait up to %d * 10ms\n", timeout); diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c index 03d7ff17dd..690e73dacf 100644 --- a/drivers/ddr/fsl/ctrl_regs.c +++ b/drivers/ddr/fsl/ctrl_regs.c @@ -17,8 +17,6 @@ #include #include -unsigned int picos_to_mclk(unsigned int picos); - /* * Determine Rtt value. * @@ -78,10 +76,11 @@ static inline int fsl_ddr_get_rtt(void) * 16 for <= 2933MT/s * 18 for higher */ -static inline unsigned int compute_cas_write_latency(void) +static inline unsigned int compute_cas_write_latency( + const unsigned int ctrl_num) { unsigned int cwl; - const unsigned int mclk_ps = get_memory_clk_period_ps(); + const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num); if (mclk_ps >= 1250) cwl = 9; else if (mclk_ps >= 1070) @@ -111,10 +110,11 @@ static inline unsigned int compute_cas_write_latency(void) * 11 if 0.935ns > tCK >= 0.833ns * 12 if 0.833ns > tCK >= 0.75ns */ -static inline unsigned int compute_cas_write_latency(void) +static inline unsigned int compute_cas_write_latency( + const unsigned int ctrl_num) { unsigned int cwl; - const unsigned int mclk_ps = get_memory_clk_period_ps(); + const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num); if (mclk_ps >= 2500) cwl = 5; @@ -287,7 +287,8 @@ static inline int avoid_odt_overlap(const dimm_params_t *dimm_params) * Avoid writing for DDR I. The new PQ38 DDR controller * dreams up non-zero default values to be backwards compatible. */ -static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, +static void set_timing_cfg_0(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, const dimm_params_t *dimm_params) { @@ -306,7 +307,7 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, /* Mode register set cycle time (tMRD). */ unsigned char tmrd_mclk; #if defined(CONFIG_SYS_FSL_DDR4) || defined(CONFIG_SYS_FSL_DDR3) - const unsigned int mclk_ps = get_memory_clk_period_ps(); + const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num); #endif #ifdef CONFIG_SYS_FSL_DDR4 @@ -314,15 +315,15 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, int txp = max((int)mclk_ps * 4, 6000); /* unit=ps */ trwt_mclk = 2; twrt_mclk = 1; - act_pd_exit_mclk = picos_to_mclk(txp); + act_pd_exit_mclk = picos_to_mclk(ctrl_num, txp); pre_pd_exit_mclk = act_pd_exit_mclk; /* * MRS_CYC = max(tMRD, tMOD) * tMRD = 8nCK, tMOD = max(24nCK, 15ns) */ - tmrd_mclk = max(24U, picos_to_mclk(15000)); + tmrd_mclk = max(24U, picos_to_mclk(ctrl_num, 15000)); #elif defined(CONFIG_SYS_FSL_DDR3) - unsigned int data_rate = get_ddr_freq(0); + unsigned int data_rate = get_ddr_freq(ctrl_num); int txp; unsigned int ip_rev; int odt_overlap; @@ -344,7 +345,8 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, * tMRD = 4nCK (8nCK for RDIMM) * tMOD = max(12nCK, 15ns) */ - tmrd_mclk = max((unsigned int)12, picos_to_mclk(15000)); + tmrd_mclk = max((unsigned int)12, + picos_to_mclk(ctrl_num, 15000)); } else { /* * MRS_CYC = tMRD @@ -388,7 +390,7 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, taxpd_mclk = 1; } else { /* act_pd_exit_mclk = tXARD, see above */ - act_pd_exit_mclk = picos_to_mclk(txp); + act_pd_exit_mclk = picos_to_mclk(ctrl_num, txp); /* Mode register MR0[A12] is '1' - fast exit */ pre_pd_exit_mclk = act_pd_exit_mclk; taxpd_mclk = 1; @@ -424,11 +426,12 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, #endif /* !defined(CONFIG_SYS_FSL_DDR1) */ /* DDR SDRAM Timing Configuration 3 (TIMING_CFG_3) */ -static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr, - const memctl_options_t *popts, - const common_timing_params_t *common_dimm, - unsigned int cas_latency, - unsigned int additive_latency) +static void set_timing_cfg_3(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, + const memctl_options_t *popts, + const common_timing_params_t *common_dimm, + unsigned int cas_latency, + unsigned int additive_latency) { /* Extended precharge to activate interval (tRP) */ unsigned int ext_pretoact = 0; @@ -447,18 +450,18 @@ static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr, /* Control Adjust */ unsigned int cntl_adj = 0; - ext_pretoact = picos_to_mclk(common_dimm->trp_ps) >> 4; - ext_acttopre = picos_to_mclk(common_dimm->tras_ps) >> 4; - ext_acttorw = picos_to_mclk(common_dimm->trcd_ps) >> 4; + ext_pretoact = picos_to_mclk(ctrl_num, common_dimm->trp_ps) >> 4; + ext_acttopre = picos_to_mclk(ctrl_num, common_dimm->tras_ps) >> 4; + ext_acttorw = picos_to_mclk(ctrl_num, common_dimm->trcd_ps) >> 4; ext_caslat = (2 * cas_latency - 1) >> 4; ext_add_lat = additive_latency >> 4; #ifdef CONFIG_SYS_FSL_DDR4 - ext_refrec = (picos_to_mclk(common_dimm->trfc1_ps) - 8) >> 4; + ext_refrec = (picos_to_mclk(ctrl_num, common_dimm->trfc1_ps) - 8) >> 4; #else - ext_refrec = (picos_to_mclk(common_dimm->trfc_ps) - 8) >> 4; + ext_refrec = (picos_to_mclk(ctrl_num, common_dimm->trfc_ps) - 8) >> 4; /* ext_wrrec only deals with 16 clock and above, or 14 with OTF */ #endif - ext_wrrec = (picos_to_mclk(common_dimm->twr_ps) + + ext_wrrec = (picos_to_mclk(ctrl_num, common_dimm->twr_ps) + (popts->otf_burst_chop_en ? 2 : 0)) >> 4; ddr->timing_cfg_3 = (0 @@ -475,10 +478,11 @@ static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr, } /* DDR SDRAM Timing Configuration 1 (TIMING_CFG_1) */ -static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, - const memctl_options_t *popts, - const common_timing_params_t *common_dimm, - unsigned int cas_latency) +static void set_timing_cfg_1(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, + const memctl_options_t *popts, + const common_timing_params_t *common_dimm, + unsigned int cas_latency) { /* Precharge-to-activate interval (tRP) */ unsigned char pretoact_mclk; @@ -510,9 +514,9 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, 1, 2, 3, 4, 5, 6, 7, 8, 10, 10, 12, 12, 14, 14, 0, 0}; #endif - pretoact_mclk = picos_to_mclk(common_dimm->trp_ps); - acttopre_mclk = picos_to_mclk(common_dimm->tras_ps); - acttorw_mclk = picos_to_mclk(common_dimm->trcd_ps); + pretoact_mclk = picos_to_mclk(ctrl_num, common_dimm->trp_ps); + acttopre_mclk = picos_to_mclk(ctrl_num, common_dimm->tras_ps); + acttorw_mclk = picos_to_mclk(ctrl_num, common_dimm->trcd_ps); /* * Translate CAS Latency to a DDR controller field value: @@ -547,19 +551,19 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, #endif #ifdef CONFIG_SYS_FSL_DDR4 - refrec_ctrl = picos_to_mclk(common_dimm->trfc1_ps) - 8; - wrrec_mclk = picos_to_mclk(common_dimm->twr_ps); - acttoact_mclk = max(picos_to_mclk(common_dimm->trrds_ps), 4U); - wrtord_mclk = max(2U, picos_to_mclk(2500)); + refrec_ctrl = picos_to_mclk(ctrl_num, common_dimm->trfc1_ps) - 8; + wrrec_mclk = picos_to_mclk(ctrl_num, common_dimm->twr_ps); + acttoact_mclk = max(picos_to_mclk(ctrl_num, common_dimm->trrds_ps), 4U); + wrtord_mclk = max(2U, picos_to_mclk(ctrl_num, 2500)); if ((wrrec_mclk < 1) || (wrrec_mclk > 24)) printf("Error: WRREC doesn't support %d clocks\n", wrrec_mclk); else wrrec_mclk = wrrec_table[wrrec_mclk - 1]; #else - refrec_ctrl = picos_to_mclk(common_dimm->trfc_ps) - 8; - wrrec_mclk = picos_to_mclk(common_dimm->twr_ps); - acttoact_mclk = picos_to_mclk(common_dimm->trrd_ps); - wrtord_mclk = picos_to_mclk(common_dimm->twtr_ps); + refrec_ctrl = picos_to_mclk(ctrl_num, common_dimm->trfc_ps) - 8; + wrrec_mclk = picos_to_mclk(ctrl_num, common_dimm->twr_ps); + acttoact_mclk = picos_to_mclk(ctrl_num, common_dimm->trrd_ps); + wrtord_mclk = picos_to_mclk(ctrl_num, common_dimm->twtr_ps); if ((wrrec_mclk < 1) || (wrrec_mclk > 16)) printf("Error: WRREC doesn't support %d clocks\n", wrrec_mclk); else @@ -602,11 +606,12 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, } /* DDR SDRAM Timing Configuration 2 (TIMING_CFG_2) */ -static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr, - const memctl_options_t *popts, - const common_timing_params_t *common_dimm, - unsigned int cas_latency, - unsigned int additive_latency) +static void set_timing_cfg_2(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, + const memctl_options_t *popts, + const common_timing_params_t *common_dimm, + unsigned int cas_latency, + unsigned int additive_latency) { /* Additive latency */ unsigned char add_lat_mclk; @@ -623,7 +628,7 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr, /* Window for four activates (tFAW) */ unsigned short four_act; #ifdef CONFIG_SYS_FSL_DDR3 - const unsigned int mclk_ps = get_memory_clk_period_ps(); + const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num); #endif /* FIXME add check that this must be less than acttorw_mclk */ @@ -641,13 +646,13 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr, #elif defined(CONFIG_SYS_FSL_DDR2) wr_lat = cas_latency - 1; #else - wr_lat = compute_cas_write_latency(); + wr_lat = compute_cas_write_latency(ctrl_num); #endif #ifdef CONFIG_SYS_FSL_DDR4 - rd_to_pre = picos_to_mclk(7500); + rd_to_pre = picos_to_mclk(ctrl_num, 7500); #else - rd_to_pre = picos_to_mclk(common_dimm->trtp_ps); + rd_to_pre = picos_to_mclk(ctrl_num, common_dimm->trtp_ps); #endif /* * JEDEC has some min requirements for tRTP @@ -665,19 +670,20 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr, wr_data_delay = popts->write_data_delay; #ifdef CONFIG_SYS_FSL_DDR4 cpo = 0; - cke_pls = max(3U, picos_to_mclk(5000)); + cke_pls = max(3U, picos_to_mclk(ctrl_num, 5000)); #elif defined(CONFIG_SYS_FSL_DDR3) /* * cke pulse = max(3nCK, 7.5ns) for DDR3-800 * max(3nCK, 5.625ns) for DDR3-1066, 1333 * max(3nCK, 5ns) for DDR3-1600, 1866, 2133 */ - cke_pls = max(3U, picos_to_mclk(mclk_ps > 1870 ? 7500 : - (mclk_ps > 1245 ? 5625 : 5000))); + cke_pls = max(3U, picos_to_mclk(ctrl_num, mclk_ps > 1870 ? 7500 : + (mclk_ps > 1245 ? 5625 : 5000))); #else cke_pls = FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR; #endif - four_act = picos_to_mclk(popts->tfaw_window_four_activates_ps); + four_act = picos_to_mclk(ctrl_num, + popts->tfaw_window_four_activates_ps); ddr->timing_cfg_2 = (0 | ((add_lat_mclk & 0xf) << 28) @@ -818,7 +824,8 @@ static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr, } /* DDR SDRAM control configuration 2 (DDR_SDRAM_CFG_2) */ -static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, +static void set_ddr_sdram_cfg_2(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, const unsigned int unq_mrs_en) { @@ -865,7 +872,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, #endif #if (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7) - slow = get_ddr_freq(0) < 1249000000; + slow = get_ddr_freq(ctrl_num) < 1249000000; #endif if (popts->registered_dimm_en) { @@ -915,7 +922,8 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, #ifdef CONFIG_SYS_FSL_DDR4 /* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */ -static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, +static void set_ddr_sdram_mode_2(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, const common_timing_params_t *common_dimm, const unsigned int unq_mrs_en) @@ -926,10 +934,10 @@ static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, unsigned int wr_crc = 0; /* Disable */ unsigned int rtt_wr = 0; /* Rtt_WR - dynamic ODT off */ unsigned int srt = 0; /* self-refresh temerature, normal range */ - unsigned int cwl = compute_cas_write_latency() - 9; + unsigned int cwl = compute_cas_write_latency(ctrl_num) - 9; unsigned int mpr = 0; /* serial */ unsigned int wc_lat; - const unsigned int mclk_ps = get_memory_clk_period_ps(); + const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num); if (popts->rtt_override) rtt_wr = popts->rtt_wr_override_value; @@ -1002,7 +1010,8 @@ static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, } #elif defined(CONFIG_SYS_FSL_DDR3) /* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */ -static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, +static void set_ddr_sdram_mode_2(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, const common_timing_params_t *common_dimm, const unsigned int unq_mrs_en) @@ -1013,7 +1022,7 @@ static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, unsigned int rtt_wr = 0; /* Rtt_WR - dynamic ODT off */ unsigned int srt = 0; /* self-refresh temerature, normal range */ unsigned int asr = 0; /* auto self-refresh disable */ - unsigned int cwl = compute_cas_write_latency() - 5; + unsigned int cwl = compute_cas_write_latency(ctrl_num) - 5; unsigned int pasr = 0; /* partial array self refresh disable */ if (popts->rtt_override) @@ -1077,7 +1086,8 @@ static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, #else /* for DDR2 and DDR1 */ /* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */ -static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, +static void set_ddr_sdram_mode_2(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, const common_timing_params_t *common_dimm, const unsigned int unq_mrs_en) @@ -1144,7 +1154,8 @@ static void set_ddr_sdram_mode_9(fsl_ddr_cfg_regs_t *ddr, } /* DDR SDRAM Mode configuration 10 (DDR_SDRAM_MODE_10) */ -static void set_ddr_sdram_mode_10(fsl_ddr_cfg_regs_t *ddr, +static void set_ddr_sdram_mode_10(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, const common_timing_params_t *common_dimm, const unsigned int unq_mrs_en) @@ -1152,7 +1163,7 @@ static void set_ddr_sdram_mode_10(fsl_ddr_cfg_regs_t *ddr, int i; unsigned short esdmode6 = 0; /* Extended SDRAM mode 6 */ unsigned short esdmode7 = 0; /* Extended SDRAM mode 7 */ - unsigned int tccdl_min = picos_to_mclk(common_dimm->tccdl_ps); + unsigned int tccdl_min = picos_to_mclk(ctrl_num, common_dimm->tccdl_ps); esdmode6 = ((tccdl_min - 4) & 0x7) << 10; @@ -1196,14 +1207,15 @@ static void set_ddr_sdram_mode_10(fsl_ddr_cfg_regs_t *ddr, #endif /* DDR SDRAM Interval Configuration (DDR_SDRAM_INTERVAL) */ -static void set_ddr_sdram_interval(fsl_ddr_cfg_regs_t *ddr, - const memctl_options_t *popts, - const common_timing_params_t *common_dimm) +static void set_ddr_sdram_interval(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, + const memctl_options_t *popts, + const common_timing_params_t *common_dimm) { unsigned int refint; /* Refresh interval */ unsigned int bstopre; /* Precharge interval */ - refint = picos_to_mclk(common_dimm->refresh_rate_ps); + refint = picos_to_mclk(ctrl_num, common_dimm->refresh_rate_ps); bstopre = popts->bstopre; @@ -1217,7 +1229,8 @@ static void set_ddr_sdram_interval(fsl_ddr_cfg_regs_t *ddr, #ifdef CONFIG_SYS_FSL_DDR4 /* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */ -static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, +static void set_ddr_sdram_mode(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, const common_timing_params_t *common_dimm, unsigned int cas_latency, @@ -1292,7 +1305,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, * 1=fast exit DLL on (tXP) */ - wr_mclk = picos_to_mclk(common_dimm->twr_ps); + wr_mclk = picos_to_mclk(ctrl_num, common_dimm->twr_ps); if (wr_mclk <= 24) { wr = wr_table[wr_mclk - 10]; } else { @@ -1387,7 +1400,8 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, #elif defined(CONFIG_SYS_FSL_DDR3) /* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */ -static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, +static void set_ddr_sdram_mode(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, const common_timing_params_t *common_dimm, unsigned int cas_latency, @@ -1466,7 +1480,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, */ dll_on = 1; - wr_mclk = picos_to_mclk(common_dimm->twr_ps); + wr_mclk = picos_to_mclk(ctrl_num, common_dimm->twr_ps); if (wr_mclk <= 16) { wr = wr_table[wr_mclk - 5]; } else { @@ -1582,7 +1596,8 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, #else /* !CONFIG_SYS_FSL_DDR3 */ /* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */ -static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, +static void set_ddr_sdram_mode(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, const common_timing_params_t *common_dimm, unsigned int cas_latency, @@ -1654,7 +1669,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, #if defined(CONFIG_SYS_FSL_DDR1) wr = 0; /* Historical */ #elif defined(CONFIG_SYS_FSL_DDR2) - wr = picos_to_mclk(common_dimm->twr_ps); + wr = picos_to_mclk(ctrl_num, common_dimm->twr_ps); #endif dll_res = 0; mode = 0; @@ -1842,15 +1857,16 @@ static void set_timing_cfg_6(fsl_ddr_cfg_regs_t *ddr) debug("FSLDDR: timing_cfg_6 = 0x%08x\n", ddr->timing_cfg_6); } -static void set_timing_cfg_7(fsl_ddr_cfg_regs_t *ddr, - const common_timing_params_t *common_dimm) +static void set_timing_cfg_7(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, + const common_timing_params_t *common_dimm) { unsigned int txpr, tcksre, tcksrx; unsigned int cke_rst, cksre, cksrx, par_lat, cs_to_cmd; - txpr = max(5U, picos_to_mclk(common_dimm->trfc1_ps + 10000)); - tcksre = max(5U, picos_to_mclk(10000)); - tcksrx = max(5U, picos_to_mclk(10000)); + txpr = max(5U, picos_to_mclk(ctrl_num, common_dimm->trfc1_ps + 10000)); + tcksre = max(5U, picos_to_mclk(ctrl_num, 10000)); + tcksrx = max(5U, picos_to_mclk(ctrl_num, 10000)); par_lat = 0; cs_to_cmd = 0; @@ -1883,14 +1899,15 @@ static void set_timing_cfg_7(fsl_ddr_cfg_regs_t *ddr, debug("FSLDDR: timing_cfg_7 = 0x%08x\n", ddr->timing_cfg_7); } -static void set_timing_cfg_8(fsl_ddr_cfg_regs_t *ddr, +static void set_timing_cfg_8(const unsigned int ctrl_num, + fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, const common_timing_params_t *common_dimm, unsigned int cas_latency) { unsigned int rwt_bg, wrt_bg, rrt_bg, wwt_bg; unsigned int acttoact_bg, wrtord_bg, pre_all_rec; - unsigned int tccdl = picos_to_mclk(common_dimm->tccdl_ps); + unsigned int tccdl = picos_to_mclk(ctrl_num, common_dimm->tccdl_ps); unsigned int wr_lat = ((ddr->timing_cfg_2 & 0x00780000) >> 19) + ((ddr->timing_cfg_2 & 0x00040000) >> 14); @@ -1911,11 +1928,11 @@ static void set_timing_cfg_8(fsl_ddr_cfg_regs_t *ddr, wwt_bg = tccdl - 4; } else { rrt_bg = tccdl - 2; - wwt_bg = tccdl - 4; + wwt_bg = tccdl - 2; } - acttoact_bg = picos_to_mclk(common_dimm->trrdl_ps); - wrtord_bg = max(4U, picos_to_mclk(7500)); + acttoact_bg = picos_to_mclk(ctrl_num, common_dimm->trrdl_ps); + wrtord_bg = max(4U, picos_to_mclk(ctrl_num, 7500)); if (popts->otf_burst_chop_en) wrtord_bg += 2; @@ -2147,7 +2164,8 @@ check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr) } unsigned int -compute_fsl_memctl_config_regs(const memctl_options_t *popts, +compute_fsl_memctl_config_regs(const unsigned int ctrl_num, + const memctl_options_t *popts, fsl_ddr_cfg_regs_t *ddr, const common_timing_params_t *common_dimm, const dimm_params_t *dimm_params, @@ -2319,14 +2337,14 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, set_ddr_eor(ddr, popts); #if !defined(CONFIG_SYS_FSL_DDR1) - set_timing_cfg_0(ddr, popts, dimm_params); + set_timing_cfg_0(ctrl_num, ddr, popts, dimm_params); #endif - set_timing_cfg_3(ddr, popts, common_dimm, cas_latency, + set_timing_cfg_3(ctrl_num, ddr, popts, common_dimm, cas_latency, additive_latency); - set_timing_cfg_1(ddr, popts, common_dimm, cas_latency); - set_timing_cfg_2(ddr, popts, common_dimm, - cas_latency, additive_latency); + set_timing_cfg_1(ctrl_num, ddr, popts, common_dimm, cas_latency); + set_timing_cfg_2(ctrl_num, ddr, popts, common_dimm, + cas_latency, additive_latency); set_ddr_cdr1(ddr, popts); set_ddr_cdr2(ddr, popts); @@ -2338,15 +2356,15 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, if ((ip_rev > 0x40700) && (popts->cswl_override != 0)) ddr->debug[18] = popts->cswl_override; - set_ddr_sdram_cfg_2(ddr, popts, unq_mrs_en); - set_ddr_sdram_mode(ddr, popts, common_dimm, - cas_latency, additive_latency, unq_mrs_en); - set_ddr_sdram_mode_2(ddr, popts, common_dimm, unq_mrs_en); + set_ddr_sdram_cfg_2(ctrl_num, ddr, popts, unq_mrs_en); + set_ddr_sdram_mode(ctrl_num, ddr, popts, common_dimm, + cas_latency, additive_latency, unq_mrs_en); + set_ddr_sdram_mode_2(ctrl_num, ddr, popts, common_dimm, unq_mrs_en); #ifdef CONFIG_SYS_FSL_DDR4 set_ddr_sdram_mode_9(ddr, popts, common_dimm, unq_mrs_en); - set_ddr_sdram_mode_10(ddr, popts, common_dimm, unq_mrs_en); + set_ddr_sdram_mode_10(ctrl_num, ddr, popts, common_dimm, unq_mrs_en); #endif - set_ddr_sdram_interval(ddr, popts, common_dimm); + set_ddr_sdram_interval(ctrl_num, ddr, popts, common_dimm); set_ddr_data_init(ddr); set_ddr_sdram_clk_cntl(ddr, popts); set_ddr_init_addr(ddr); @@ -2356,8 +2374,8 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, #ifdef CONFIG_SYS_FSL_DDR4 set_ddr_sdram_cfg_3(ddr, popts); set_timing_cfg_6(ddr); - set_timing_cfg_7(ddr, common_dimm); - set_timing_cfg_8(ddr, popts, common_dimm, cas_latency); + set_timing_cfg_7(ctrl_num, ddr, common_dimm); + set_timing_cfg_8(ctrl_num, ddr, popts, common_dimm, cas_latency); set_timing_cfg_9(ddr); set_ddr_dq_mapping(ddr, dimm_params); #endif @@ -2372,7 +2390,11 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, #ifdef CONFIG_SYS_FSL_DDR_EMU /* disble DDR training for emulator */ ddr->debug[2] = 0x00000400; - ddr->debug[4] = 0xff800000; + ddr->debug[4] = 0xff800800; + ddr->debug[5] = 0x08000800; + ddr->debug[6] = 0x08000800; + ddr->debug[7] = 0x08000800; + ddr->debug[8] = 0x08000800; #endif #ifdef CONFIG_SYS_FSL_ERRATUM_A004508 if ((ip_rev >= 0x40000) && (ip_rev < 0x40400)) diff --git a/drivers/ddr/fsl/ddr1_dimm_params.c b/drivers/ddr/fsl/ddr1_dimm_params.c index 7df27b90b7..7f1c3afcc4 100644 --- a/drivers/ddr/fsl/ddr1_dimm_params.c +++ b/drivers/ddr/fsl/ddr1_dimm_params.c @@ -228,10 +228,10 @@ compute_derated_DDR1_CAS_latency(unsigned int mclk_ps) * * FIXME: use #define for the retvals */ -unsigned int -ddr_compute_dimm_parameters(const ddr1_spd_eeprom_t *spd, - dimm_params_t *pdimm, - unsigned int dimm_number) +unsigned int ddr_compute_dimm_parameters(const unsigned int ctrl_num, + const ddr1_spd_eeprom_t *spd, + dimm_params_t *pdimm, + unsigned int dimm_number) { unsigned int retval; @@ -311,16 +311,16 @@ ddr_compute_dimm_parameters(const ddr1_spd_eeprom_t *spd, & ~(1 << pdimm->caslat_x_minus_1)); /* Compute CAS latencies below that defined by SPD */ - pdimm->caslat_lowest_derated - = compute_derated_DDR1_CAS_latency(get_memory_clk_period_ps()); + pdimm->caslat_lowest_derated = compute_derated_DDR1_CAS_latency( + get_memory_clk_period_ps(ctrl_num)); /* Compute timing parameters */ pdimm->trcd_ps = spd->trcd * 250; pdimm->trp_ps = spd->trp * 250; pdimm->tras_ps = spd->tras * 1000; - pdimm->twr_ps = mclk_to_picos(3); - pdimm->twtr_ps = mclk_to_picos(1); + pdimm->twr_ps = mclk_to_picos(ctrl_num, 3); + pdimm->twtr_ps = mclk_to_picos(ctrl_num, 1); pdimm->trfc_ps = compute_trfc_ps_from_spd(0, spd->trfc); pdimm->trrd_ps = spd->trrd * 250; @@ -335,7 +335,7 @@ ddr_compute_dimm_parameters(const ddr1_spd_eeprom_t *spd, pdimm->tdh_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->data_hold); - pdimm->trtp_ps = mclk_to_picos(2); /* By the book. */ + pdimm->trtp_ps = mclk_to_picos(ctrl_num, 2); /* By the book. */ pdimm->tdqsq_max_ps = spd->tdqsq * 10; pdimm->tqhs_ps = spd->tqhs * 10; diff --git a/drivers/ddr/fsl/ddr2_dimm_params.c b/drivers/ddr/fsl/ddr2_dimm_params.c index d865df78a8..49cc1a07ff 100644 --- a/drivers/ddr/fsl/ddr2_dimm_params.c +++ b/drivers/ddr/fsl/ddr2_dimm_params.c @@ -211,10 +211,10 @@ compute_derated_DDR2_CAS_latency(unsigned int mclk_ps) * * FIXME: use #define for the retvals */ -unsigned int -ddr_compute_dimm_parameters(const ddr2_spd_eeprom_t *spd, - dimm_params_t *pdimm, - unsigned int dimm_number) +unsigned int ddr_compute_dimm_parameters(const unsigned int ctrl_num, + const ddr2_spd_eeprom_t *spd, + dimm_params_t *pdimm, + unsigned int dimm_number) { unsigned int retval; @@ -310,8 +310,8 @@ ddr_compute_dimm_parameters(const ddr2_spd_eeprom_t *spd, & ~(1 << pdimm->caslat_x_minus_1)); /* Compute CAS latencies below that defined by SPD */ - pdimm->caslat_lowest_derated - = compute_derated_DDR2_CAS_latency(get_memory_clk_period_ps()); + pdimm->caslat_lowest_derated = compute_derated_DDR2_CAS_latency( + get_memory_clk_period_ps(ctrl_num)); /* Compute timing parameters */ pdimm->trcd_ps = spd->trcd * 250; diff --git a/drivers/ddr/fsl/ddr3_dimm_params.c b/drivers/ddr/fsl/ddr3_dimm_params.c index a4b8c101f5..69177150ec 100644 --- a/drivers/ddr/fsl/ddr3_dimm_params.c +++ b/drivers/ddr/fsl/ddr3_dimm_params.c @@ -83,10 +83,10 @@ compute_ranksize(const ddr3_spd_eeprom_t *spd) * Writes the results to the dimm_params_t structure pointed by pdimm. * */ -unsigned int -ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd, - dimm_params_t *pdimm, - unsigned int dimm_number) +unsigned int ddr_compute_dimm_parameters(const unsigned int ctrl_num, + const ddr3_spd_eeprom_t *spd, + dimm_params_t *pdimm, + unsigned int dimm_number) { unsigned int retval; unsigned int mtb_ps; diff --git a/drivers/ddr/fsl/ddr4_dimm_params.c b/drivers/ddr/fsl/ddr4_dimm_params.c index aaddc8fa08..bbfb4ee417 100644 --- a/drivers/ddr/fsl/ddr4_dimm_params.c +++ b/drivers/ddr/fsl/ddr4_dimm_params.c @@ -119,10 +119,10 @@ compute_ranksize(const struct ddr4_spd_eeprom_s *spd) * Writes the results to the dimm_params_t structure pointed by pdimm. * */ -unsigned int -ddr_compute_dimm_parameters(const generic_spd_eeprom_t *spd, - dimm_params_t *pdimm, - unsigned int dimm_number) +unsigned int ddr_compute_dimm_parameters(const unsigned int ctrl_num, + const generic_spd_eeprom_t *spd, + dimm_params_t *pdimm, + unsigned int dimm_number) { unsigned int retval; int i; diff --git a/drivers/ddr/fsl/fsl_ddr_gen4.c b/drivers/ddr/fsl/fsl_ddr_gen4.c index 4eef047343..d9fce7d2f3 100644 --- a/drivers/ddr/fsl/fsl_ddr_gen4.c +++ b/drivers/ddr/fsl/fsl_ddr_gen4.c @@ -32,24 +32,44 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, u32 temp_sdram_cfg; u32 total_gb_size_per_controller; int timeout; +#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \ + defined(CONFIG_SYS_FSL_ERRATUM_A008514) + u32 *eddrtqcr1; +#endif switch (ctrl_num) { case 0: ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR; +#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \ + defined(CONFIG_SYS_FSL_ERRATUM_A008514) + eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR_ADDR + 0x800; +#endif break; #if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) case 1: ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR; +#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \ + defined(CONFIG_SYS_FSL_ERRATUM_A008514) + eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR2_ADDR + 0x800; +#endif break; #endif #if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) case 2: ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR; +#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \ + defined(CONFIG_SYS_FSL_ERRATUM_A008514) + eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR3_ADDR + 0x800; +#endif break; #endif #if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) case 3: ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR; +#if defined(CONFIG_SYS_FSL_ERRATUM_A008336) || \ + defined(CONFIG_SYS_FSL_ERRATUM_A008514) + eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR4_ADDR + 0x800; +#endif break; #endif default: @@ -60,6 +80,20 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, if (step == 2) goto step2; +#ifdef CONFIG_SYS_FSL_ERRATUM_A008336 +#ifdef CONFIG_LS2085A + /* A008336 only applies to general DDR controllers */ + if ((ctrl_num == 0) || (ctrl_num == 1)) +#endif + ddr_out32(eddrtqcr1, 0x63b30002); +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A008514 +#ifdef CONFIG_LS2085A + /* A008514 only applies to DP-DDR controler */ + if (ctrl_num == 2) +#endif + ddr_out32(eddrtqcr1, 0x63b20002); +#endif if (regs->ddr_eor) ddr_out32(&ddr->eor, regs->ddr_eor); @@ -253,7 +287,7 @@ step2: bus_width = 3 - ((ddr_in32(&ddr->sdram_cfg) & SDRAM_CFG_DBW_MASK) >> SDRAM_CFG_DBW_SHIFT); timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 / - (get_ddr_freq(0) >> 20)) << 2; + (get_ddr_freq(ctrl_num) >> 20)) << 2; total_gb_size_per_controller >>= 4; /* shift down to gb size */ debug("total %d GB\n", total_gb_size_per_controller); debug("Need to wait up to %d * 10ms\n", timeout); diff --git a/drivers/ddr/fsl/lc_common_dimm_params.c b/drivers/ddr/fsl/lc_common_dimm_params.c index 73db444615..b295344c4d 100644 --- a/drivers/ddr/fsl/lc_common_dimm_params.c +++ b/drivers/ddr/fsl/lc_common_dimm_params.c @@ -13,7 +13,8 @@ #if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4) static unsigned int -compute_cas_latency(const dimm_params_t *dimm_params, +compute_cas_latency(const unsigned int ctrl_num, + const dimm_params_t *dimm_params, common_timing_params_t *outpdimm, unsigned int number_of_dimms) { @@ -22,7 +23,7 @@ compute_cas_latency(const dimm_params_t *dimm_params, unsigned int caslat_actual; unsigned int retry = 16; unsigned int tmp; - const unsigned int mclk_ps = get_memory_clk_period_ps(); + const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num); #ifdef CONFIG_SYS_FSL_DDR3 const unsigned int taamax = 20000; #else @@ -72,12 +73,13 @@ compute_cas_latency(const dimm_params_t *dimm_params, } #else /* for DDR1 and DDR2 */ static unsigned int -compute_cas_latency(const dimm_params_t *dimm_params, +compute_cas_latency(const unsigned int ctrl_num, + const dimm_params_t *dimm_params, common_timing_params_t *outpdimm, unsigned int number_of_dimms) { int i; - const unsigned int mclk_ps = get_memory_clk_period_ps(); + const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num); unsigned int lowest_good_caslat; unsigned int not_ok; unsigned int temp1, temp2; @@ -212,7 +214,8 @@ compute_cas_latency(const dimm_params_t *dimm_params, * by dimm_params. */ unsigned int -compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, +compute_lowest_common_dimm_parameters(const unsigned int ctrl_num, + const dimm_params_t *dimm_params, common_timing_params_t *outpdimm, const unsigned int number_of_dimms) { @@ -442,7 +445,8 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, printf("ERROR: Mix different RDIMM detected!\n"); /* calculate cas latency for all DDR types */ - if (compute_cas_latency(dimm_params, outpdimm, number_of_dimms)) + if (compute_cas_latency(ctrl_num, dimm_params, + outpdimm, number_of_dimms)) return 1; /* Determine if all DIMMs ECC capable. */ @@ -518,11 +522,12 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, #if defined(CONFIG_SYS_FSL_DDR2) if ((outpdimm->lowest_common_spd_caslat < 4) && - (picos_to_mclk(trcd_ps) > outpdimm->lowest_common_spd_caslat)) { - additive_latency = picos_to_mclk(trcd_ps) - + (picos_to_mclk(ctrl_num, trcd_ps) > + outpdimm->lowest_common_spd_caslat)) { + additive_latency = picos_to_mclk(ctrl_num, trcd_ps) - outpdimm->lowest_common_spd_caslat; - if (mclk_to_picos(additive_latency) > trcd_ps) { - additive_latency = picos_to_mclk(trcd_ps); + if (mclk_to_picos(ctrl_num, additive_latency) > trcd_ps) { + additive_latency = picos_to_mclk(ctrl_num, trcd_ps); debug("setting additive_latency to %u because it was " " greater than tRCD_ps\n", additive_latency); } @@ -534,7 +539,7 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, * * AL <= tRCD(min) */ - if (mclk_to_picos(additive_latency) > trcd_ps) { + if (mclk_to_picos(ctrl_num, additive_latency) > trcd_ps) { printf("Error: invalid additive latency exceeds tRCD(min).\n"); return 1; } diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c index 6f291ebc03..b72b24290e 100644 --- a/drivers/ddr/fsl/main.c +++ b/drivers/ddr/fsl/main.c @@ -450,7 +450,8 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, &(pinfo->spd_installed_dimms[i][j]); dimm_params_t *pdimm = &(pinfo->dimm_params[i][j]); - retval = compute_dimm_parameters(spd, pdimm, i); + retval = compute_dimm_parameters( + i, spd, pdimm, j); #ifdef CONFIG_SYS_DDR_RAW_TIMING if (!i && !j && retval) { printf("SPD error on controller %d! " @@ -507,10 +508,11 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, for (i = first_ctrl; i <= last_ctrl; i++) { debug("Computing lowest common DIMM" " parameters for memctl=%u\n", i); - compute_lowest_common_dimm_parameters( - pinfo->dimm_params[i], - &timing_params[i], - CONFIG_DIMM_SLOTS_PER_CTLR); + compute_lowest_common_dimm_parameters + (i, + pinfo->dimm_params[i], + &timing_params[i], + CONFIG_DIMM_SLOTS_PER_CTLR); } case STEP_GATHER_OPTS: @@ -562,12 +564,13 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, continue; } - compute_fsl_memctl_config_regs( - &pinfo->memctl_opts[i], - &ddr_reg[i], &timing_params[i], - pinfo->dimm_params[i], - dbw_capacity_adjust[i], - size_only); + compute_fsl_memctl_config_regs + (i, + &pinfo->memctl_opts[i], + &ddr_reg[i], &timing_params[i], + pinfo->dimm_params[i], + dbw_capacity_adjust[i], + size_only); } default: @@ -689,6 +692,10 @@ phys_size_t __fsl_ddr_sdram(fsl_ddr_info_t *pinfo) } } +#ifdef CONFIG_FSL_DDR_SYNC_REFRESH + fsl_ddr_sync_memctl_refresh(first_ctrl, last_ctrl); +#endif + #ifdef CONFIG_PPC /* program LAWs */ for (i = first_ctrl; i <= last_ctrl; i++) { diff --git a/drivers/ddr/fsl/mpc85xx_ddr_gen3.c b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c index 8f4d01ad85..6752d4d29e 100644 --- a/drivers/ddr/fsl/mpc85xx_ddr_gen3.c +++ b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c @@ -426,7 +426,7 @@ step2: bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK) >> SDRAM_CFG_DBW_SHIFT); timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 / - (get_ddr_freq(0) >> 20)) << 1; + (get_ddr_freq(ctrl_num) >> 20)) << 1; #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 timeout_save = timeout; #endif @@ -538,12 +538,14 @@ step2: case 1: out_be32(&ddr->cs1_bnds, regs->cs[csn].bnds); break; +#if CONFIG_CHIP_SELECTS_PER_CTRL > 2 case 2: out_be32(&ddr->cs2_bnds, regs->cs[csn].bnds); break; case 3: out_be32(&ddr->cs3_bnds, regs->cs[csn].bnds); break; +#endif } clrbits_be32(&ddr->sdram_cfg, 0x2); } diff --git a/drivers/ddr/fsl/options.c b/drivers/ddr/fsl/options.c index 6d098d1fa2..5beb11b02b 100644 --- a/drivers/ddr/fsl/options.c +++ b/drivers/ddr/fsl/options.c @@ -732,7 +732,7 @@ unsigned int populate_memctl_options(int all_dimms_registered, #endif /* Global Timing Parameters. */ - debug("mclk_ps = %u ps\n", get_memory_clk_period_ps()); + debug("mclk_ps = %u ps\n", get_memory_clk_period_ps(ctrl_num)); /* Pick a caslat override. */ popts->cas_latency_override = 0; @@ -785,7 +785,7 @@ unsigned int populate_memctl_options(int all_dimms_registered, * FIXME: width, was considering looking at pdimm->primary_sdram_width */ #if defined(CONFIG_SYS_FSL_DDR1) - popts->tfaw_window_four_activates_ps = mclk_to_picos(1); + popts->tfaw_window_four_activates_ps = mclk_to_picos(ctrl_num, 1); #elif defined(CONFIG_SYS_FSL_DDR2) /* @@ -1036,7 +1036,7 @@ done: if (pdimm[0].n_ranks == 4) popts->quad_rank_present = 1; - ddr_freq = get_ddr_freq(0) / 1000000; + ddr_freq = get_ddr_freq(ctrl_num) / 1000000; if (popts->registered_dimm_en) { popts->rcw_override = 1; popts->rcw_1 = 0x000a5a00; diff --git a/drivers/ddr/fsl/util.c b/drivers/ddr/fsl/util.c index 58b519b403..664081b1b8 100644 --- a/drivers/ddr/fsl/util.c +++ b/drivers/ddr/fsl/util.c @@ -43,9 +43,9 @@ u32 fsl_ddr_get_version(void) * propagation, compute a suitably rounded mclk_ps to compute * a working memory controller configuration. */ -unsigned int get_memory_clk_period_ps(void) +unsigned int get_memory_clk_period_ps(const unsigned int ctrl_num) { - unsigned int data_rate = get_ddr_freq(0); + unsigned int data_rate = get_ddr_freq(ctrl_num); unsigned int result; /* Round to nearest 10ps, being careful about 64-bit multiply/divide */ @@ -59,10 +59,10 @@ unsigned int get_memory_clk_period_ps(void) } /* Convert picoseconds into DRAM clock cycles (rounding up if needed). */ -unsigned int picos_to_mclk(unsigned int picos) +unsigned int picos_to_mclk(const unsigned int ctrl_num, unsigned int picos) { unsigned long long clks, clks_rem; - unsigned long data_rate = get_ddr_freq(0); + unsigned long data_rate = get_ddr_freq(ctrl_num); /* Short circuit for zero picos */ if (!picos) @@ -88,9 +88,9 @@ unsigned int picos_to_mclk(unsigned int picos) return (unsigned int) clks; } -unsigned int mclk_to_picos(unsigned int mclk) +unsigned int mclk_to_picos(const unsigned int ctrl_num, unsigned int mclk) { - return get_memory_clk_period_ps() * mclk; + return get_memory_clk_period_ps(ctrl_num) * mclk; } #ifdef CONFIG_PPC @@ -308,3 +308,58 @@ void board_add_ram_info(int use_default) { detail_board_ddr_info(); } + +#ifdef CONFIG_FSL_DDR_SYNC_REFRESH +#define DDRC_DEBUG20_INIT_DONE 0x80000000 +#define DDRC_DEBUG2_RF 0x00000040 +void fsl_ddr_sync_memctl_refresh(unsigned int first_ctrl, + unsigned int last_ctrl) +{ + unsigned int i; + u32 ddrc_debug20; + u32 ddrc_debug2[CONFIG_NUM_DDR_CONTROLLERS] = {}; + u32 *ddrc_debug2_p[CONFIG_NUM_DDR_CONTROLLERS] = {}; + struct ccsr_ddr __iomem *ddr; + + for (i = first_ctrl; i <= last_ctrl; i++) { + switch (i) { + case 0: + ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR; + break; +#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) + case 1: + ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR; + break; +#endif +#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) + case 2: + ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR; + break; +#endif +#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) + case 3: + ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR; + break; +#endif + default: + printf("%s unexpected ctrl = %u\n", __func__, i); + return; + } + ddrc_debug20 = ddr_in32(&ddr->debug[19]); + ddrc_debug2_p[i] = &ddr->debug[1]; + while (!(ddrc_debug20 & DDRC_DEBUG20_INIT_DONE)) { + /* keep polling until DDRC init is done */ + udelay(100); + ddrc_debug20 = ddr_in32(&ddr->debug[19]); + } + ddrc_debug2[i] = ddr_in32(&ddr->debug[1]) | DDRC_DEBUG2_RF; + } + /* + * Sync refresh + * This is put together to make sure the refresh reqeusts are sent + * closely to each other. + */ + for (i = first_ctrl; i <= last_ctrl; i++) + ddr_out32(ddrc_debug2_p[i], ddrc_debug2[i]); +} +#endif /* CONFIG_FSL_DDR_SYNC_REFRESH */ diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index c55eb28217..f5d2ccba15 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -319,7 +319,8 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) esdhc_write32(®s->cmdarg, cmd->cmdarg); #if defined(CONFIG_FSL_USDHC) esdhc_write32(®s->mixctrl, - (esdhc_read32(®s->mixctrl) & 0xFFFFFF80) | (xfertyp & 0x7F)); + (esdhc_read32(®s->mixctrl) & 0xFFFFFF80) | (xfertyp & 0x7F) + | (mmc->ddr_mode ? XFERTYP_DDREN : 0)); esdhc_write32(®s->xfertyp, xfertyp & 0xFFFF0000); #else esdhc_write32(®s->xfertyp, xfertyp); @@ -442,7 +443,7 @@ static void set_sysctl(struct mmc *mmc, uint clock) if ((sdhc_clk / (div * pre_div)) <= clock) break; - pre_div >>= 1; + pre_div >>= mmc->ddr_mode ? 2 : 1; div -= 1; clk = (pre_div << 8) | (div << 4); @@ -601,6 +602,9 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg) } cfg->cfg.host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT | MMC_MODE_HC; +#ifdef CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE + cfg->cfg.host_caps |= MMC_MODE_DDR_52MHz; +#endif if (cfg->max_bus_width > 0) { if (cfg->max_bus_width < 8) diff --git a/drivers/net/Makefile b/drivers/net/Makefile index da5e2bc3ab..b8b08034eb 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -64,5 +64,5 @@ obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o obj-$(CONFIG_XILINX_LL_TEMAC) += xilinx_ll_temac.o xilinx_ll_temac_mdio.o \ xilinx_ll_temac_fifo.o xilinx_ll_temac_sdma.o obj-$(CONFIG_ZYNQ_GEM) += zynq_gem.o -obj-$(CONFIG_FSL_MC_ENET) += fsl_mc/ +obj-$(CONFIG_FSL_MC_ENET) += fsl-mc/ obj-$(CONFIG_VSC9953) += vsc9953.o diff --git a/drivers/net/fsl_mc/Makefile b/drivers/net/fsl-mc/Makefile similarity index 75% rename from drivers/net/fsl_mc/Makefile rename to drivers/net/fsl-mc/Makefile index 483408623c..206ac6be07 100644 --- a/drivers/net/fsl_mc/Makefile +++ b/drivers/net/fsl-mc/Makefile @@ -5,4 +5,6 @@ # # Layerscape MC driver -obj-y += mc.o +obj-y += mc.o \ + mc_sys.o \ + dpmng.o diff --git a/drivers/net/fsl-mc/dpmng.c b/drivers/net/fsl-mc/dpmng.c new file mode 100644 index 0000000000..cc14c7b755 --- /dev/null +++ b/drivers/net/fsl-mc/dpmng.c @@ -0,0 +1,91 @@ +/* Copyright 2014 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include +#include +#include +#include "fsl_dpmng_cmd.h" + +int mc_get_version(struct fsl_mc_io *mc_io, struct mc_version *mc_ver_info) +{ + struct mc_command cmd = { 0 }; + int err; + + /* prepare command */ + cmd.header = mc_encode_cmd_header(DPMNG_CMDID_GET_VERSION, + MC_CMD_PRI_LOW, 0); + + /* send command to mc*/ + err = mc_send_command(mc_io, &cmd); + if (err) + return err; + + /* retrieve response parameters */ + DPMNG_RSP_GET_VERSION(cmd, mc_ver_info); + + return 0; +} + +int dpmng_reset_aiop(struct fsl_mc_io *mc_io, int container_id, + int aiop_tile_id) +{ + struct mc_command cmd = { 0 }; + + /* prepare command */ + cmd.header = mc_encode_cmd_header(DPMNG_CMDID_RESET_AIOP, + MC_CMD_PRI_LOW, 0); + DPMNG_CMD_RESET_AIOP(cmd, container_id, aiop_tile_id); + + /* send command to mc*/ + return mc_send_command(mc_io, &cmd); +} + +int dpmng_load_aiop(struct fsl_mc_io *mc_io, + int container_id, + int aiop_tile_id, + uint64_t img_iova, + uint32_t img_size) +{ + struct mc_command cmd = { 0 }; + + /* prepare command */ + cmd.header = mc_encode_cmd_header(DPMNG_CMDID_LOAD_AIOP, + MC_CMD_PRI_LOW, + 0); + DPMNG_CMD_LOAD_AIOP(cmd, container_id, aiop_tile_id, img_size, + img_iova); + + /* send command to mc*/ + return mc_send_command(mc_io, &cmd); +} + +int dpmng_run_aiop(struct fsl_mc_io *mc_io, + int container_id, + int aiop_tile_id, + const struct dpmng_aiop_run_cfg *cfg) +{ + struct mc_command cmd = { 0 }; + + /* prepare command */ + cmd.header = mc_encode_cmd_header(DPMNG_CMDID_RUN_AIOP, + MC_CMD_PRI_LOW, + 0); + DPMNG_CMD_RUN_AIOP(cmd, container_id, aiop_tile_id, cfg); + + /* send command to mc*/ + return mc_send_command(mc_io, &cmd); +} + +int dpmng_reset_mc_portal(struct fsl_mc_io *mc_io) +{ + struct mc_command cmd = { 0 }; + + /* prepare command */ + cmd.header = mc_encode_cmd_header(DPMNG_CMDID_RESET_MC_PORTAL, + MC_CMD_PRI_LOW, + 0); + + /* send command to mc*/ + return mc_send_command(mc_io, &cmd); +} diff --git a/drivers/net/fsl-mc/fsl_dpmng_cmd.h b/drivers/net/fsl-mc/fsl_dpmng_cmd.h new file mode 100644 index 0000000000..c9fe021f45 --- /dev/null +++ b/drivers/net/fsl-mc/fsl_dpmng_cmd.h @@ -0,0 +1,49 @@ +/* Copyright 2014 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __FSL_DPMNG_CMD_H +#define __FSL_DPMNG_CMD_H + +/* Command IDs */ +#define DPMNG_CMDID_GET_VERSION 0x831 +#define DPMNG_CMDID_RESET_AIOP 0x832 +#define DPMNG_CMDID_LOAD_AIOP 0x833 +#define DPMNG_CMDID_RUN_AIOP 0x834 +#define DPMNG_CMDID_RESET_MC_PORTAL 0x835 + +/* cmd, param, offset, width, type, arg_name */ +#define DPMNG_RSP_GET_VERSION(cmd, mc_ver_info) \ +do { \ + MC_RSP_OP(cmd, 0, 0, 32, uint32_t, mc_ver_info->revision); \ + MC_RSP_OP(cmd, 0, 32, 32, uint32_t, mc_ver_info->major); \ + MC_RSP_OP(cmd, 1, 0, 32, uint32_t, mc_ver_info->minor); \ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ +#define DPMNG_CMD_RESET_AIOP(cmd, container_id, aiop_tile_id) \ +do { \ + MC_CMD_OP(cmd, 0, 0, 32, int, aiop_tile_id); \ + MC_CMD_OP(cmd, 0, 32, 32, int, container_id); \ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ +#define DPMNG_CMD_LOAD_AIOP(cmd, container_id, aiop_tile_id, img_size, \ + img_iova) \ +do { \ + MC_CMD_OP(cmd, 0, 0, 32, int, aiop_tile_id); \ + MC_CMD_OP(cmd, 0, 32, 32, int, container_id); \ + MC_CMD_OP(cmd, 1, 0, 32, uint32_t, img_size); \ + MC_CMD_OP(cmd, 2, 0, 64, uint64_t, img_iova); \ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ +#define DPMNG_CMD_RUN_AIOP(cmd, container_id, aiop_tile_id, cfg) \ +do { \ + MC_CMD_OP(cmd, 0, 0, 32, int, aiop_tile_id); \ + MC_CMD_OP(cmd, 0, 32, 32, int, container_id); \ + MC_CMD_OP(cmd, 1, 0, 32, uint32_t, cfg->cores_mask); \ + MC_CMD_OP(cmd, 2, 0, 64, uint64_t, cfg->options); \ +} while (0) + +#endif /* __FSL_DPMNG_CMD_H */ diff --git a/drivers/net/fsl_mc/mc.c b/drivers/net/fsl-mc/mc.c similarity index 67% rename from drivers/net/fsl_mc/mc.c rename to drivers/net/fsl-mc/mc.c index df84568a94..74b0085301 100644 --- a/drivers/net/fsl_mc/mc.c +++ b/drivers/net/fsl-mc/mc.c @@ -3,9 +3,12 @@ * * SPDX-License-Identifier: GPL-2.0+ */ + #include #include -#include +#include +#include +#include DECLARE_GLOBAL_DATA_PTR; static int mc_boot_status; @@ -14,7 +17,7 @@ static int mc_boot_status; * Copying MC firmware or DPL image to DDR */ static int mc_copy_image(const char *title, - u64 image_addr, u32 image_size, u64 mc_ram_addr) + u64 image_addr, u32 image_size, u64 mc_ram_addr) { debug("%s copied to address %p\n", title, (void *)mc_ram_addr); memcpy((void *)mc_ram_addr, (void *)image_addr, image_size); @@ -25,10 +28,9 @@ static int mc_copy_image(const char *title, * MC firmware FIT image parser checks if the image is in FIT * format, verifies integrity of the image and calculates * raw image address and size values. - * Returns 0 if success and 1 if any of the above mentioned + * Returns 0 on success and a negative errno on error. * task fail. **/ - int parse_mc_firmware_fit_image(const void **raw_image_addr, size_t *raw_image_size) { @@ -39,7 +41,7 @@ int parse_mc_firmware_fit_image(const void **raw_image_addr, size_t size; const char *uname = "firmware"; - /* Check if the image is in NOR flash*/ + /* Check if the image is in NOR flash */ #ifdef CONFIG_SYS_LS_MC_FW_IN_NOR fit_hdr = (void *)CONFIG_SYS_LS_MC_FW_ADDR; #else @@ -50,26 +52,26 @@ int parse_mc_firmware_fit_image(const void **raw_image_addr, format = genimg_get_format(fit_hdr); if (format != IMAGE_FORMAT_FIT) { - debug("Not a FIT image\n"); - return 1; + printf("fsl-mc: ERROR: Bad firmware image (not a FIT image)\n"); + return -EINVAL; } if (!fit_check_format(fit_hdr)) { - debug("Bad FIT image format\n"); - return 1; + printf("fsl-mc: ERROR: Bad firmware image (bad FIT header)\n"); + return -EINVAL; } node_offset = fit_image_get_node(fit_hdr, uname); if (node_offset < 0) { - debug("Can not find %s subimage\n", uname); - return 1; + printf("fsl-mc: ERROR: Bad firmware image (missing subimage)\n"); + return -ENOENT; } /* Verify MC firmware image */ if (!(fit_image_verify(fit_hdr, node_offset))) { - debug("Bad MC firmware hash"); - return 1; + printf("fsl-mc: ERROR: Bad firmware image (bad CRC)\n"); + return -EINVAL; } /* Get address and size of raw image */ @@ -90,12 +92,13 @@ int mc_init(bd_t *bis) u64 mc_dpl_offset; u32 reg_gsr; u32 mc_fw_boot_status; - void *fdt_hdr; + void *dpl_fdt_hdr; int dpl_size; const void *raw_image_addr; size_t raw_image_size = 0; - - BUILD_BUG_ON(CONFIG_SYS_LS_MC_FW_LENGTH % 4 != 0); + struct fsl_mc_io mc_io; + int portal_id; + struct mc_version mc_ver_info; /* * The MC private DRAM block was already carved at the end of DRAM @@ -130,25 +133,44 @@ int mc_init(bd_t *bis) /* * Load the MC FW at the beginning of the MC private DRAM block: */ - mc_copy_image( - "MC Firmware", - (u64)raw_image_addr, - raw_image_size, - mc_ram_addr); + mc_copy_image("MC Firmware", + (u64)raw_image_addr, raw_image_size, mc_ram_addr); + + /* + * Get address and size of the DPL blob stored in flash: + */ +#ifdef CONFIG_SYS_LS_MC_DPL_IN_NOR + dpl_fdt_hdr = (void *)CONFIG_SYS_LS_MC_DPL_ADDR; +#else +#error "No CONFIG_SYS_LS_MC_DPL_IN_xxx defined" +#endif + + error = fdt_check_header(dpl_fdt_hdr); + if (error != 0) { + printf("fsl-mc: ERROR: Bad DPL image (bad header)\n"); + goto out; + } + + dpl_size = fdt_totalsize(dpl_fdt_hdr); + if (dpl_size > CONFIG_SYS_LS_MC_DPL_MAX_LENGTH) { + printf("fsl-mc: ERROR: Bad DPL image (too large: %d)\n", + dpl_size); + error = -EINVAL; + goto out; + } /* * Calculate offset in the MC private DRAM block at which the MC DPL * blob is to be placed: */ #ifdef CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET - BUILD_BUG_ON( - (CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET & 0x3) != 0 || - CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET > 0xffffffff); + BUILD_BUG_ON((CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET & 0x3) != 0 || + CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET > 0xffffffff); mc_dpl_offset = CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET; #else mc_dpl_offset = mc_get_dram_block_size() - - roundup(CONFIG_SYS_LS_MC_DPL_LENGTH, 4096); + roundup(CONFIG_SYS_LS_MC_DPL_MAX_LENGTH, 4096); if ((mc_dpl_offset & 0x3) != 0 || mc_dpl_offset > 0xffffffff) { printf("%s: Invalid MC DPL offset: %llu\n", @@ -158,23 +180,14 @@ int mc_init(bd_t *bis) } #endif - /* Check if DPL image is in NOR flash */ -#ifdef CONFIG_SYS_LS_MC_DPL_IN_NOR - fdt_hdr = (void *)CONFIG_SYS_LS_MC_DPL_ADDR; -#else -#error "No CONFIG_SYS_LS_MC_DPL_IN_xxx defined" -#endif - - dpl_size = fdt_totalsize(fdt_hdr); - /* * Load the MC DPL blob at the far end of the MC private DRAM block: + * + * TODO: Should we place the DPL at a different location to match + * assumptions of MC firmware about its memory layout? */ - mc_copy_image( - "MC DPL blob", - (u64)fdt_hdr, - dpl_size, - mc_ram_addr + mc_dpl_offset); + mc_copy_image("MC DPL blob", + (u64)dpl_fdt_hdr, dpl_size, mc_ram_addr + mc_dpl_offset); debug("mc_ccsr_regs %p\n", mc_ccsr_regs); @@ -200,6 +213,8 @@ int mc_init(bd_t *bis) */ out_le32(&mc_ccsr_regs->reg_gsr, (u32)(mc_dpl_offset >> 2)); + printf("\nfsl-mc: Booting Management Complex ...\n"); + /* * Deassert reset and release MC core 0 to run */ @@ -219,17 +234,13 @@ int mc_init(bd_t *bis) } if (timeout <= 0) { - printf("%s: timeout booting management complex firmware\n", - __func__); + printf("fsl-mc: timeout booting management complex firmware\n"); /* TODO: Get an error status from an MC CCSR register */ error = -ETIMEDOUT; goto out; } - printf("Management complex booted (boot status: %#x)\n", - mc_fw_boot_status); - if (mc_fw_boot_status != 0x1) { /* * TODO: Identify critical errors from the GSR register's FS @@ -237,8 +248,41 @@ int mc_init(bd_t *bis) * appropriate errno, so that the status property is set to * failure in the fsl,dprc device tree node. */ + printf("fsl-mc: WARNING: Firmware booted with error (GSR: %#x)\n", + reg_gsr); } + /* + * TODO: need to obtain the portal_id for the root container from the + * DPL + */ + portal_id = 0; + + /* + * Check that the MC firmware is responding portal commands: + */ + mc_io.mmio_regs = SOC_MC_PORTAL_ADDR(portal_id); + debug("Checking access to MC portal of root DPRC container (portal_id %d, portal physical addr %p)\n", + portal_id, mc_io.mmio_regs); + + error = mc_get_version(&mc_io, &mc_ver_info); + if (error != 0) { + printf("fsl-mc: ERROR: Firmware version check failed (error: %d)\n", + error); + goto out; + } + + if (MC_VER_MAJOR != mc_ver_info.major) + printf("fsl-mc: ERROR: Firmware major version mismatch (found: %d, expected: %d)\n", + mc_ver_info.major, MC_VER_MAJOR); + + if (MC_VER_MINOR != mc_ver_info.minor) + printf("fsl-mc: WARNING: Firmware minor version mismatch (found: %d, expected: %d)\n", + mc_ver_info.minor, MC_VER_MINOR); + + printf("fsl-mc: Management Complex booted (version: %d.%d.%d, boot status: %#x)\n", + mc_ver_info.major, mc_ver_info.minor, mc_ver_info.revision, + mc_fw_boot_status); out: if (error != 0) mc_boot_status = -error; diff --git a/drivers/net/fsl-mc/mc_sys.c b/drivers/net/fsl-mc/mc_sys.c new file mode 100644 index 0000000000..7c8e003ad0 --- /dev/null +++ b/drivers/net/fsl-mc/mc_sys.c @@ -0,0 +1,63 @@ +/* + * Freescale Layerscape MC I/O wrapper + * + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * Author: German Rivera + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +#define MC_CMD_HDR_READ_CMDID(_hdr) \ + ((uint16_t)u64_dec((_hdr), MC_CMD_HDR_CMDID_O, MC_CMD_HDR_CMDID_S)) + +/** + * mc_send_command - Send MC command and wait for response + * + * @mc_io: Pointer to MC I/O object to be used + * @cmd: MC command buffer. On input, it contains the command to send to the MC. + * On output, it contains the response from the MC if any. + * + * Depending on the sharing option specified when creating the MC portal + * wrapper, this function will use a spinlock or mutex to ensure exclusive + * access to the MC portal from the point when the command is sent until a + * response is received from the MC. + */ +int mc_send_command(struct fsl_mc_io *mc_io, + struct mc_command *cmd) +{ + enum mc_cmd_status status; + int timeout = 2000; + + mc_write_command(mc_io->mmio_regs, cmd); + + for ( ; ; ) { + status = mc_read_response(mc_io->mmio_regs, cmd); + if (status != MC_CMD_STATUS_READY) + break; + + if (--timeout == 0) { + printf("Error: Timeout waiting for MC response\n"); + return -ETIMEDOUT; + } + + udelay(500); + } + + if (status != MC_CMD_STATUS_OK) { + printf("Error: MC command failed (portal: %p, obj handle: %#x, command: %#x, status: %#x)\n", + mc_io->mmio_regs, + (unsigned int)MC_CMD_HDR_READ_AUTHID(cmd->header), + (unsigned int)MC_CMD_HDR_READ_CMDID(cmd->header), + (unsigned int)status); + + return -EIO; + } + + return 0; +} diff --git a/drivers/pci/pcie_layerscape.c b/drivers/pci/pcie_layerscape.c index 291c249c86..bcad8f2aec 100644 --- a/drivers/pci/pcie_layerscape.c +++ b/drivers/pci/pcie_layerscape.c @@ -1,5 +1,5 @@ /* - * Copyright 2014 Freescale Semiconductor, Inc. + * Copyright 2014-2015 Freescale Semiconductor, Inc. * Layerscape PCIe driver * * SPDX-License-Identifier: GPL-2.0+ @@ -9,8 +9,465 @@ #include #include #include +#include +#include #include +#ifndef CONFIG_SYS_PCI_MEMORY_BUS +#define CONFIG_SYS_PCI_MEMORY_BUS CONFIG_SYS_SDRAM_BASE +#endif + +#ifndef CONFIG_SYS_PCI_MEMORY_PHYS +#define CONFIG_SYS_PCI_MEMORY_PHYS CONFIG_SYS_SDRAM_BASE +#endif + +#ifndef CONFIG_SYS_PCI_MEMORY_SIZE +#define CONFIG_SYS_PCI_MEMORY_SIZE (2 * 1024 * 1024 * 1024UL) /* 2G */ +#endif + +/* iATU registers */ +#define PCIE_ATU_VIEWPORT 0x900 +#define PCIE_ATU_REGION_INBOUND (0x1 << 31) +#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31) +#define PCIE_ATU_REGION_INDEX0 (0x0 << 0) +#define PCIE_ATU_REGION_INDEX1 (0x1 << 0) +#define PCIE_ATU_REGION_INDEX2 (0x2 << 0) +#define PCIE_ATU_REGION_INDEX3 (0x3 << 0) +#define PCIE_ATU_CR1 0x904 +#define PCIE_ATU_TYPE_MEM (0x0 << 0) +#define PCIE_ATU_TYPE_IO (0x2 << 0) +#define PCIE_ATU_TYPE_CFG0 (0x4 << 0) +#define PCIE_ATU_TYPE_CFG1 (0x5 << 0) +#define PCIE_ATU_CR2 0x908 +#define PCIE_ATU_ENABLE (0x1 << 31) +#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30) +#define PCIE_ATU_LOWER_BASE 0x90C +#define PCIE_ATU_UPPER_BASE 0x910 +#define PCIE_ATU_LIMIT 0x914 +#define PCIE_ATU_LOWER_TARGET 0x918 +#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24) +#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19) +#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16) +#define PCIE_ATU_UPPER_TARGET 0x91C + +#define PCIE_LINK_CAP 0x7c +#define PCIE_LINK_SPEED_MASK 0xf +#define PCIE_LINK_STA 0x82 + +#define PCIE_DBI_SIZE (4 * 1024) /* 4K */ + +struct ls_pcie { + int idx; + void __iomem *dbi; + void __iomem *va_cfg0; + void __iomem *va_cfg1; + struct pci_controller hose; +}; + +struct ls_pcie_info { + unsigned long regs; + int pci_num; + u64 cfg0_phys; + u64 cfg0_size; + u64 cfg1_phys; + u64 cfg1_size; + u64 mem_bus; + u64 mem_phys; + u64 mem_size; + u64 io_bus; + u64 io_phys; + u64 io_size; +}; + +#define SET_LS_PCIE_INFO(x, num) \ +{ \ + x.regs = CONFIG_SYS_PCIE##num##_ADDR; \ + x.cfg0_phys = CONFIG_SYS_PCIE_CFG0_PHYS_OFF + \ + CONFIG_SYS_PCIE##num##_PHYS_ADDR; \ + x.cfg0_size = CONFIG_SYS_PCIE_CFG0_SIZE; \ + x.cfg1_phys = CONFIG_SYS_PCIE_CFG1_PHYS_OFF + \ + CONFIG_SYS_PCIE##num##_PHYS_ADDR; \ + x.cfg1_size = CONFIG_SYS_PCIE_CFG1_SIZE; \ + x.mem_bus = CONFIG_SYS_PCIE_MEM_BUS; \ + x.mem_phys = CONFIG_SYS_PCIE_MEM_PHYS_OFF + \ + CONFIG_SYS_PCIE##num##_PHYS_ADDR; \ + x.mem_size = CONFIG_SYS_PCIE_MEM_SIZE; \ + x.io_bus = CONFIG_SYS_PCIE_IO_BUS; \ + x.io_phys = CONFIG_SYS_PCIE_IO_PHYS_OFF + \ + CONFIG_SYS_PCIE##num##_PHYS_ADDR; \ + x.io_size = CONFIG_SYS_PCIE_IO_SIZE; \ + x.pci_num = num; \ +} + +#ifdef CONFIG_LS102XA +#include + +/* PEX1/2 Misc Ports Status Register */ +#define LTSSM_STATE_SHIFT 20 +#define LTSSM_STATE_MASK 0x3f +#define LTSSM_PCIE_L0 0x11 /* L0 state */ + +static int ls_pcie_link_state(struct ls_pcie *pcie) +{ + u32 state; + struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; + + state = in_be32(&scfg->pexmscportsr[pcie->idx]); + state = (state >> LTSSM_STATE_SHIFT) & LTSSM_STATE_MASK; + if (state < LTSSM_PCIE_L0) { + debug("....PCIe link error. LTSSM=0x%02x.\n", state); + return 0; + } + + return 1; +} +#else +#define PCIE_LDBG 0x7FC + +static int ls_pcie_link_state(struct ls_pcie *pcie) +{ + u32 state; + + state = readl(pcie->dbi + PCIE_LDBG); + if (state) + return 1; + + debug("....PCIe link error.\n"); + return 0; +} +#endif + +static int ls_pcie_link_up(struct ls_pcie *pcie) +{ + int state; + u32 cap; + + state = ls_pcie_link_state(pcie); + if (state) + return state; + + /* Try to download speed to gen1 */ + cap = readl(pcie->dbi + PCIE_LINK_CAP); + writel((cap & (~PCIE_LINK_SPEED_MASK)) | 1, pcie->dbi + PCIE_LINK_CAP); + udelay(2000); + state = ls_pcie_link_state(pcie); + if (state) + return state; + + writel(cap, pcie->dbi + PCIE_LINK_CAP); + + return 0; +} + +static void ls_pcie_cfg0_set_busdev(struct ls_pcie *pcie, u32 busdev) +{ + writel(PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0, + pcie->dbi + PCIE_ATU_VIEWPORT); + writel(busdev, pcie->dbi + PCIE_ATU_LOWER_TARGET); +} + +static void ls_pcie_cfg1_set_busdev(struct ls_pcie *pcie, u32 busdev) +{ + writel(PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1, + pcie->dbi + PCIE_ATU_VIEWPORT); + writel(busdev, pcie->dbi + PCIE_ATU_LOWER_TARGET); +} + +static void ls_pcie_iatu_outbound_set(struct ls_pcie *pcie, int idx, int type, + u64 phys, u64 bus_addr, pci_size_t size) +{ + writel(PCIE_ATU_REGION_OUTBOUND | idx, pcie->dbi + PCIE_ATU_VIEWPORT); + writel((u32)phys, pcie->dbi + PCIE_ATU_LOWER_BASE); + writel(phys >> 32, pcie->dbi + PCIE_ATU_UPPER_BASE); + writel(phys + size - 1, pcie->dbi + PCIE_ATU_LIMIT); + writel((u32)bus_addr, pcie->dbi + PCIE_ATU_LOWER_TARGET); + writel(bus_addr >> 32, pcie->dbi + PCIE_ATU_UPPER_TARGET); + writel(type, pcie->dbi + PCIE_ATU_CR1); + writel(PCIE_ATU_ENABLE, pcie->dbi + PCIE_ATU_CR2); +} + +static void ls_pcie_setup_atu(struct ls_pcie *pcie, struct ls_pcie_info *info) +{ +#ifdef DEBUG + int i; +#endif + + /* ATU 0 : OUTBOUND : CFG0 */ + ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX0, + PCIE_ATU_TYPE_CFG0, + info->cfg0_phys, + 0, + info->cfg0_size); + /* ATU 1 : OUTBOUND : CFG1 */ + ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX1, + PCIE_ATU_TYPE_CFG1, + info->cfg1_phys, + 0, + info->cfg1_size); + /* ATU 2 : OUTBOUND : MEM */ + ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX2, + PCIE_ATU_TYPE_MEM, + info->mem_phys, + info->mem_bus, + info->mem_size); + /* ATU 3 : OUTBOUND : IO */ + ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX3, + PCIE_ATU_TYPE_IO, + info->io_phys, + info->io_bus, + info->io_size); + +#ifdef DEBUG + for (i = 0; i <= PCIE_ATU_REGION_INDEX3; i++) { + writel(PCIE_ATU_REGION_OUTBOUND | i, + pcie->dbi + PCIE_ATU_VIEWPORT); + debug("iATU%d:\n", i); + debug("\tLOWER PHYS 0x%08x\n", + readl(pcie->dbi + PCIE_ATU_LOWER_BASE)); + debug("\tUPPER PHYS 0x%08x\n", + readl(pcie->dbi + PCIE_ATU_UPPER_BASE)); + debug("\tLOWER BUS 0x%08x\n", + readl(pcie->dbi + PCIE_ATU_LOWER_TARGET)); + debug("\tUPPER BUS 0x%08x\n", + readl(pcie->dbi + PCIE_ATU_UPPER_TARGET)); + debug("\tLIMIT 0x%08x\n", + readl(pcie->dbi + PCIE_ATU_LIMIT)); + debug("\tCR1 0x%08x\n", + readl(pcie->dbi + PCIE_ATU_CR1)); + debug("\tCR2 0x%08x\n", + readl(pcie->dbi + PCIE_ATU_CR2)); + } +#endif +} + +int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev) +{ + /* Do not skip controller */ + return 0; +} + +static int ls_pcie_addr_valid(struct pci_controller *hose, pci_dev_t d) +{ + if (PCI_DEV(d) > 0) + return -EINVAL; + + return 0; +} + +static int ls_pcie_read_config(struct pci_controller *hose, pci_dev_t d, + int where, u32 *val) +{ + struct ls_pcie *pcie = hose->priv_data; + u32 busdev, *addr; + + if (ls_pcie_addr_valid(hose, d)) { + *val = 0xffffffff; + return -EINVAL; + } + + if (PCI_BUS(d) == hose->first_busno) { + addr = pcie->dbi + (where & ~0x3); + } else { + busdev = PCIE_ATU_BUS(PCI_BUS(d)) | + PCIE_ATU_DEV(PCI_DEV(d)) | + PCIE_ATU_FUNC(PCI_FUNC(d)); + + if (PCI_BUS(d) == hose->first_busno + 1) { + ls_pcie_cfg0_set_busdev(pcie, busdev); + addr = pcie->va_cfg0 + (where & ~0x3); + } else { + ls_pcie_cfg1_set_busdev(pcie, busdev); + addr = pcie->va_cfg1 + (where & ~0x3); + } + } + + *val = readl(addr); + + return 0; +} + +static int ls_pcie_write_config(struct pci_controller *hose, pci_dev_t d, + int where, u32 val) +{ + struct ls_pcie *pcie = hose->priv_data; + u32 busdev, *addr; + + if (ls_pcie_addr_valid(hose, d)) + return -EINVAL; + + if (PCI_BUS(d) == hose->first_busno) { + addr = pcie->dbi + (where & ~0x3); + } else { + busdev = PCIE_ATU_BUS(PCI_BUS(d)) | + PCIE_ATU_DEV(PCI_DEV(d)) | + PCIE_ATU_FUNC(PCI_FUNC(d)); + + if (PCI_BUS(d) == hose->first_busno + 1) { + ls_pcie_cfg0_set_busdev(pcie, busdev); + addr = pcie->va_cfg0 + (where & ~0x3); + } else { + ls_pcie_cfg1_set_busdev(pcie, busdev); + addr = pcie->va_cfg1 + (where & ~0x3); + } + } + + writel(val, addr); + + return 0; +} + +static void ls_pcie_setup_ctrl(struct ls_pcie *pcie, + struct ls_pcie_info *info) +{ + struct pci_controller *hose = &pcie->hose; + pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0); + + ls_pcie_setup_atu(pcie, info); + + pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0); + + /* program correct class for RC */ + pci_hose_write_config_word(hose, dev, PCI_CLASS_DEVICE, + PCI_CLASS_BRIDGE_PCI); +} + +int ls_pcie_init_ctrl(int busno, enum srds_prtcl dev, struct ls_pcie_info *info) +{ + struct ls_pcie *pcie; + struct pci_controller *hose; + int num = dev - PCIE1; + pci_dev_t pdev = PCI_BDF(busno, 0, 0); + int i, linkup, ep_mode; + u8 header_type; + u16 temp16; + + if (!is_serdes_configured(dev)) { + printf("PCIe%d: disabled\n", num + 1); + return busno; + } + + pcie = malloc(sizeof(*pcie)); + if (!pcie) + return busno; + memset(pcie, 0, sizeof(*pcie)); + + hose = &pcie->hose; + hose->priv_data = pcie; + hose->first_busno = busno; + pcie->idx = num; + pcie->dbi = map_physmem(info->regs, PCIE_DBI_SIZE, MAP_NOCACHE); + pcie->va_cfg0 = map_physmem(info->cfg0_phys, + info->cfg0_size, + MAP_NOCACHE); + pcie->va_cfg1 = map_physmem(info->cfg1_phys, + info->cfg1_size, + MAP_NOCACHE); + + /* outbound memory */ + pci_set_region(&hose->regions[0], + (pci_size_t)info->mem_bus, + (phys_size_t)info->mem_phys, + (pci_size_t)info->mem_size, + PCI_REGION_MEM); + + /* outbound io */ + pci_set_region(&hose->regions[1], + (pci_size_t)info->io_bus, + (phys_size_t)info->io_phys, + (pci_size_t)info->io_size, + PCI_REGION_IO); + + /* System memory space */ + pci_set_region(&hose->regions[2], + CONFIG_SYS_PCI_MEMORY_BUS, + CONFIG_SYS_PCI_MEMORY_PHYS, + CONFIG_SYS_PCI_MEMORY_SIZE, + PCI_REGION_SYS_MEMORY); + + hose->region_count = 3; + + for (i = 0; i < hose->region_count; i++) + debug("PCI reg:%d %016llx:%016llx %016llx %08lx\n", + i, + (u64)hose->regions[i].phys_start, + (u64)hose->regions[i].bus_start, + (u64)hose->regions[i].size, + hose->regions[i].flags); + + pci_set_ops(hose, + pci_hose_read_config_byte_via_dword, + pci_hose_read_config_word_via_dword, + ls_pcie_read_config, + pci_hose_write_config_byte_via_dword, + pci_hose_write_config_word_via_dword, + ls_pcie_write_config); + + pci_hose_read_config_byte(hose, pdev, PCI_HEADER_TYPE, &header_type); + ep_mode = (header_type & 0x7f) == PCI_HEADER_TYPE_NORMAL; + printf("PCIe%u: %s ", info->pci_num, + ep_mode ? "Endpoint" : "Root Complex"); + + linkup = ls_pcie_link_up(pcie); + + if (!linkup) { + /* Let the user know there's no PCIe link */ + printf("no link, regs @ 0x%lx\n", info->regs); + hose->last_busno = hose->first_busno; + return busno; + } + + /* Print the negotiated PCIe link width */ + pci_hose_read_config_word(hose, dev, PCIE_LINK_STA, &temp16); + printf("x%d gen%d, regs @ 0x%lx\n", (temp16 & 0x3f0) >> 4, + (temp16 & 0xf), info->regs); + + if (ep_mode) + return busno; + + ls_pcie_setup_ctrl(pcie, info); + + pci_register_hose(hose); + + hose->last_busno = pci_hose_scan(hose); + + printf("PCIe%x: Bus %02x - %02x\n", + info->pci_num, hose->first_busno, hose->last_busno); + + return hose->last_busno + 1; +} + +int ls_pcie_init_board(int busno) +{ + struct ls_pcie_info info; + +#ifdef CONFIG_PCIE1 + SET_LS_PCIE_INFO(info, 1); + busno = ls_pcie_init_ctrl(busno, PCIE1, &info); +#endif + +#ifdef CONFIG_PCIE2 + SET_LS_PCIE_INFO(info, 2); + busno = ls_pcie_init_ctrl(busno, PCIE2, &info); +#endif + +#ifdef CONFIG_PCIE3 + SET_LS_PCIE_INFO(info, 3); + busno = ls_pcie_init_ctrl(busno, PCIE3, &info); +#endif + +#ifdef CONFIG_PCIE4 + SET_LS_PCIE_INFO(info, 4); + busno = ls_pcie_init_ctrl(busno, PCIE4, &info); +#endif + + return busno; +} + +void pci_init_board(void) +{ + ls_pcie_init_board(0); +} + #ifdef CONFIG_OF_BOARD_SETUP #include #include @@ -38,6 +495,14 @@ void ft_pcie_setup(void *blob, bd_t *bd) #ifdef CONFIG_PCIE2 ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE2_ADDR, PCIE2); #endif + + #ifdef CONFIG_PCIE3 + ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE3_ADDR, PCIE3); + #endif + + #ifdef CONFIG_PCIE4 + ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE4_ADDR, PCIE4); + #endif } #else @@ -45,7 +510,3 @@ void ft_pcie_setup(void *blob, bd_t *bd) { } #endif - -void pci_init_board(void) -{ -} diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 2874ccc6fa..3dc4da391b 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -510,6 +510,30 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */ #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" +#define CONFIG_SYS_PCI_64BIT + +#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000 +#define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */ +#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000 +#define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */ + +#define CONFIG_SYS_PCIE_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000 +#define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */ + +#define CONFIG_SYS_PCIE_MEM_BUS 0x08000000 +#define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x04000000 +#define CONFIG_SYS_PCIE_MEM_SIZE 0x08000000 /* 128M */ + +#ifdef CONFIG_PCI +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP +#define CONFIG_E1000 +#define CONFIG_PCI_SCAN_SHOW +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#endif + #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 0a0bb5f109..a13876b550 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -303,6 +303,30 @@ #define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */ #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" +#define CONFIG_SYS_PCI_64BIT + +#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000 +#define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */ +#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000 +#define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */ + +#define CONFIG_SYS_PCIE_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000 +#define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */ + +#define CONFIG_SYS_PCIE_MEM_BUS 0x08000000 +#define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x04000000 +#define CONFIG_SYS_PCIE_MEM_SIZE 0x08000000 /* 128M */ + +#ifdef CONFIG_PCI +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP +#define CONFIG_E1000 +#define CONFIG_PCI_SCAN_SHOW +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#endif + #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h index 6fe032c9ff..17a1cde039 100644 --- a/include/configs/ls2085a_common.h +++ b/include/configs/ls2085a_common.h @@ -13,6 +13,7 @@ #define CONFIG_FSL_LSCH3 #define CONFIG_LS2085A #define CONFIG_GICV3 +#define CONFIG_FSL_TZPC_BP147 /* Link Definitions */ #define CONFIG_SYS_TEXT_BASE 0x30001000 @@ -26,9 +27,6 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_BOARD_EARLY_INIT_F 1 -#define CONFIG_IDENT_STRING " LS2085A-EMU" -#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-EMU" - /* Flat Device Tree Definitions */ #define CONFIG_OF_LIBFDT #define CONFIG_OF_BOARD_SETUP @@ -209,12 +207,10 @@ #define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024) #define CONFIG_SYS_LS_MC_FW_IN_NOR #define CONFIG_SYS_LS_MC_FW_ADDR 0x580200000ULL -/* TODO Actual FW length needs to be determined at runtime from FW header */ -#define CONFIG_SYS_LS_MC_FW_LENGTH (4U * 1024 * 1024) #define CONFIG_SYS_LS_MC_DPL_IN_NOR #define CONFIG_SYS_LS_MC_DPL_ADDR 0x5806C0000ULL /* TODO Actual DPL max length needs to be confirmed with the MC FW team */ -#define CONFIG_SYS_LS_MC_DPL_LENGTH 4096 +#define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH (256 * 1024) #define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0xe00000 /* Carve the MC private DRAM block from the end of DRAM */ @@ -248,7 +244,8 @@ /* Physical Memory Map */ /* fixme: these need to be checked against the board */ #define CONFIG_CHIP_SELECTS_PER_CTRL 4 -#define CONFIG_SYS_CLK_FREQ 133333333 +#define CONFIG_SYS_CLK_FREQ 100000000 +#define CONFIG_DDR_CLK_FREQ 133333333 #define CONFIG_NR_DRAM_BANKS 3 @@ -268,12 +265,14 @@ "fdt_high=0xffffffffffffffff\0" \ "initrd_high=0xffffffffffffffff\0" \ "kernel_start=0x581200000\0" \ - "kernel_load=0x806f0000\0" \ + "kernel_load=0xa0000000\0" \ "kernel_size=0x1000000\0" \ "console=ttyAMA0,38400n8\0" -#define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \ - "earlyprintk=uart8250-8bit,0x21c0600" +#define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \ + "earlycon=uart8250,mmio,0x21c0600,115200 " \ + "default_hugepagesz=2m hugepagesz=2m " \ + "hugepages=16" #define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \ "$kernel_size && bootm $kernel_load" #define CONFIG_BOOTDELAY 1 diff --git a/include/configs/ls2085a_emu.h b/include/configs/ls2085a_emu.h index 487cd99c5d..a02d69450b 100644 --- a/include/configs/ls2085a_emu.h +++ b/include/configs/ls2085a_emu.h @@ -9,6 +9,9 @@ #include "ls2085a_common.h" +#define CONFIG_IDENT_STRING " LS2085A-EMU" +#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-EMU" + #define CONFIG_DDR_SPD #define CONFIG_SYS_FSL_DDR_EMU /* Support emulator */ #define SPD_EEPROM_ADDRESS1 0x51 @@ -17,4 +20,5 @@ #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 #define CONFIG_SYS_SPD_BUS_NUM 1 /* SPD on I2C bus 1 */ +#define CONFIG_FSL_DDR_SYNC_REFRESH #endif /* __LS2_EMU_H */ diff --git a/include/configs/ls2085a_simu.h b/include/configs/ls2085a_simu.h index 0f40b787b4..af34f3f95d 100644 --- a/include/configs/ls2085a_simu.h +++ b/include/configs/ls2085a_simu.h @@ -9,6 +9,9 @@ #include "ls2085a_common.h" +#define CONFIG_IDENT_STRING " LS2085A-SIMU" +#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-SIMU" + /* SMSC 91C111 ethernet configuration */ #define CONFIG_SMC91111 #define CONFIG_SMC91111_BASE (0x2210000) diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index e0528ce4b9..29b72b2e9d 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -28,6 +28,8 @@ #define CONFIG_SYS_PL310_BASE L2_PL310_BASE #endif +#define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE + #define CONFIG_MP #define CONFIG_MXC_GPT_HCLK diff --git a/include/fsl-mc/fsl_dpmng.h b/include/fsl-mc/fsl_dpmng.h new file mode 100644 index 0000000000..c2e1ddd18b --- /dev/null +++ b/include/fsl-mc/fsl_dpmng.h @@ -0,0 +1,121 @@ +/* Copyright 2014 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +/*! + * @file fsl_dpmng.h + * @brief Management Complex General API + */ + +#ifndef __FSL_DPMNG_H +#define __FSL_DPMNG_H + +/*! + * @Group grp_dpmng Management Complex General API + * + * @brief Contains general API for the Management Complex firmware + * @{ + */ + +struct fsl_mc_io; + +/** + * @brief Management Complex firmware version information + */ +#define MC_VER_MAJOR 4 +#define MC_VER_MINOR 0 + +struct mc_version { + uint32_t major; + /*!< Major version number: incremented on API compatibility changes */ + uint32_t minor; + /*!< Minor version number: incremented on API additions (that are + * backward compatible); reset when major version is incremented + */ + uint32_t revision; + /*!< Internal revision number: incremented on implementation changes + * and/or bug fixes that have no impact on API + */ +}; + +/** + * @brief Retrieves the Management Complex firmware version information + * + * @param[in] mc_io Pointer to opaque I/O object + * @param[out] mc_ver_info Pointer to version information structure + * + * @returns '0' on Success; Error code otherwise. + */ +int mc_get_version(struct fsl_mc_io *mc_io, struct mc_version *mc_ver_info); + +/** + * @brief Resets an AIOP tile + * + * @param[in] mc_io Pointer to opaque I/O object + * @param[in] container_id AIOP container ID + * @param[in] aiop_tile_id AIOP tile ID to reset + * + * @returns '0' on Success; Error code otherwise. + */ +int dpmng_reset_aiop(struct fsl_mc_io *mc_io, + int container_id, + int aiop_tile_id); + +/** + * @brief Loads an image to AIOP tile + * + * @param[in] mc_io Pointer to opaque I/O object + * @param[in] container_id AIOP container ID + * @param[in] aiop_tile_id AIOP tile ID to reset + * @param[in] img_iova I/O virtual address of AIOP ELF image + * @param[in] img_size Size of AIOP ELF image in memory (in bytes) + * + * @returns '0' on Success; Error code otherwise. + */ +int dpmng_load_aiop(struct fsl_mc_io *mc_io, + int container_id, + int aiop_tile_id, + uint64_t img_iova, + uint32_t img_size); + +/** + * @brief AIOP run configuration + */ +struct dpmng_aiop_run_cfg { + uint32_t cores_mask; + /*!< Mask of AIOP cores to run (core 0 in most significant bit) */ + uint64_t options; + /*!< Execution options (currently none defined) */ +}; + +/** + * @brief Starts AIOP tile execution + * + * @param[in] mc_io Pointer to MC portal's I/O object + * @param[in] container_id AIOP container ID + * @param[in] aiop_tile_id AIOP tile ID to reset + * @param[in] cfg AIOP run configuration + * + * @returns '0' on Success; Error code otherwise. + */ +int dpmng_run_aiop(struct fsl_mc_io *mc_io, + int container_id, + int aiop_tile_id, + const struct dpmng_aiop_run_cfg *cfg); + +/** + * @brief Resets MC portal + * + * This function closes all object handles (tokens) that are currently + * open in the MC portal on which the command is submitted. This allows + * cleanup of stale handles that belong to non-functional user processes. + * + * @param[in] mc_io Pointer to MC portal's I/O object + * + * @returns '0' on Success; Error code otherwise. + */ +int dpmng_reset_mc_portal(struct fsl_mc_io *mc_io); + +/** @} */ + +#endif /* __FSL_DPMNG_H */ diff --git a/include/fsl_mc.h b/include/fsl-mc/fsl_mc.h similarity index 100% rename from include/fsl_mc.h rename to include/fsl-mc/fsl_mc.h diff --git a/include/fsl-mc/fsl_mc_cmd.h b/include/fsl-mc/fsl_mc_cmd.h new file mode 100644 index 0000000000..e7fcb5b142 --- /dev/null +++ b/include/fsl-mc/fsl_mc_cmd.h @@ -0,0 +1,132 @@ +/* Copyright 2014 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __FSL_MC_CMD_H +#define __FSL_MC_CMD_H + +#define MC_CMD_NUM_OF_PARAMS 7 + +#define MAKE_UMASK64(_width) \ + ((uint64_t)((_width) < 64 ? ((uint64_t)1 << (_width)) - 1 : -1)) + +static inline uint64_t u64_enc(int lsoffset, int width, uint64_t val) +{ + return (uint64_t)(((uint64_t)val & MAKE_UMASK64(width)) << lsoffset); +} +static inline uint64_t u64_dec(uint64_t val, int lsoffset, int width) +{ + return (uint64_t)((val >> lsoffset) & MAKE_UMASK64(width)); +} + +struct mc_command { + uint64_t header; + uint64_t params[MC_CMD_NUM_OF_PARAMS]; +}; + +enum mc_cmd_status { + MC_CMD_STATUS_OK = 0x0, /*!< Completed successfully */ + MC_CMD_STATUS_READY = 0x1, /*!< Ready to be processed */ + MC_CMD_STATUS_AUTH_ERR = 0x3, /*!< Authentication error */ + MC_CMD_STATUS_NO_PRIVILEGE = 0x4, /*!< No privilege */ + MC_CMD_STATUS_DMA_ERR = 0x5, /*!< DMA or I/O error */ + MC_CMD_STATUS_CONFIG_ERR = 0x6, /*!< Configuration error */ + MC_CMD_STATUS_TIMEOUT = 0x7, /*!< Operation timed out */ + MC_CMD_STATUS_NO_RESOURCE = 0x8, /*!< No resources */ + MC_CMD_STATUS_NO_MEMORY = 0x9, /*!< No memory available */ + MC_CMD_STATUS_BUSY = 0xA, /*!< Device is busy */ + MC_CMD_STATUS_UNSUPPORTED_OP = 0xB, /*!< Unsupported operation */ + MC_CMD_STATUS_INVALID_STATE = 0xC /*!< Invalid state */ +}; + +#define MC_CMD_HDR_CMDID_O 52 /* Command ID field offset */ +#define MC_CMD_HDR_CMDID_S 12 /* Command ID field size */ +#define MC_CMD_HDR_AUTHID_O 38 /* Authentication ID field offset */ +#define MC_CMD_HDR_AUTHID_S 10 /* Authentication ID field size */ +#define MC_CMD_HDR_STATUS_O 16 /* Status field offset */ +#define MC_CMD_HDR_STATUS_S 8 /* Status field size*/ +#define MC_CMD_HDR_PRI_O 15 /* Priority field offset */ +#define MC_CMD_HDR_PRI_S 1 /* Priority field size */ + +#define MC_CMD_HDR_READ_STATUS(_hdr) \ + ((enum mc_cmd_status)u64_dec((_hdr), \ + MC_CMD_HDR_STATUS_O, MC_CMD_HDR_STATUS_S)) + +#define MC_CMD_HDR_READ_AUTHID(_hdr) \ + ((uint16_t)u64_dec((_hdr), MC_CMD_HDR_AUTHID_O, MC_CMD_HDR_AUTHID_S)) + +#define MC_CMD_PRI_LOW 0 /*!< Low Priority command indication */ +#define MC_CMD_PRI_HIGH 1 /*!< High Priority command indication */ + +#define MC_CMD_OP(_cmd, _param, _offset, _width, _type, _arg) \ + ((_cmd).params[_param] |= u64_enc((_offset), (_width), _arg)) + +#define MC_RSP_OP(_cmd, _param, _offset, _width, _type, _arg) \ + (_arg = (_type)u64_dec(_cmd.params[_param], (_offset), (_width))) + +static inline uint64_t mc_encode_cmd_header(uint16_t cmd_id, + uint8_t priority, + uint16_t auth_id) +{ + uint64_t hdr; + + hdr = u64_enc(MC_CMD_HDR_CMDID_O, MC_CMD_HDR_CMDID_S, cmd_id); + hdr |= u64_enc(MC_CMD_HDR_AUTHID_O, MC_CMD_HDR_AUTHID_S, auth_id); + hdr |= u64_enc(MC_CMD_HDR_PRI_O, MC_CMD_HDR_PRI_S, priority); + hdr |= u64_enc(MC_CMD_HDR_STATUS_O, MC_CMD_HDR_STATUS_S, + MC_CMD_STATUS_READY); + + return hdr; +} + +/** + * mc_write_command - writes a command to a Management Complex (MC) portal + * + * @portal: pointer to an MC portal + * @cmd: pointer to a filled command + */ +static inline void mc_write_command(struct mc_command __iomem *portal, + struct mc_command *cmd) +{ + int i; + + /* copy command parameters into the portal */ + for (i = 0; i < MC_CMD_NUM_OF_PARAMS; i++) + writeq(cmd->params[i], &portal->params[i]); + + /* submit the command by writing the header */ + writeq(cmd->header, &portal->header); +} + +/** + * mc_read_response - reads the response for the last MC command from a + * Management Complex (MC) portal + * + * @portal: pointer to an MC portal + * @resp: pointer to command response buffer + * + * Returns MC_CMD_STATUS_OK on Success; Error code otherwise. + */ +static inline enum mc_cmd_status mc_read_response( + struct mc_command __iomem *portal, + struct mc_command *resp) +{ + int i; + enum mc_cmd_status status; + + /* Copy command response header from MC portal: */ + resp->header = readq(&portal->header); + status = MC_CMD_HDR_READ_STATUS(resp->header); + if (status != MC_CMD_STATUS_OK) + return status; + + /* Copy command response data from MC portal: */ + for (i = 0; i < MC_CMD_NUM_OF_PARAMS; i++) + resp->params[i] = readq(&portal->params[i]); + + return status; +} + +int mc_send_command(struct fsl_mc_io *mc_io, struct mc_command *cmd); + +#endif /* __FSL_MC_CMD_H */ diff --git a/include/fsl-mc/fsl_mc_sys.h b/include/fsl-mc/fsl_mc_sys.h new file mode 100644 index 0000000000..c0befe01d2 --- /dev/null +++ b/include/fsl-mc/fsl_mc_sys.h @@ -0,0 +1,26 @@ +/* + * Freescale Layerscape Management Complex (MC) Environment-specific code + * + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _FSL_MC_SYS_H +#define _FSL_MC_SYS_H + +#include + +struct mc_command; + +/* + * struct mc_portal_wrapper - MC command portal wrapper object + */ +struct fsl_mc_io { + struct mc_command __iomem *mmio_regs; +}; + +int mc_send_command(struct fsl_mc_io *mc_io, + struct mc_command *cmd); + +#endif /* _FSL_MC_SYS_H */ diff --git a/include/fsl_ddr.h b/include/fsl_ddr.h index 3286c95907..feccef9c9c 100644 --- a/include/fsl_ddr.h +++ b/include/fsl_ddr.h @@ -44,11 +44,12 @@ u32 fsl_ddr_get_version(void); * to this specific DDR technology. */ static __inline__ int -compute_dimm_parameters(const generic_spd_eeprom_t *spd, +compute_dimm_parameters(const unsigned int ctrl_num, + const generic_spd_eeprom_t *spd, dimm_params_t *pdimm, unsigned int dimm_number) { - return ddr_compute_dimm_parameters(spd, pdimm, dimm_number); + return ddr_compute_dimm_parameters(ctrl_num, spd, pdimm, dimm_number); } #endif @@ -92,13 +93,15 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, unsigned int size_only); const char *step_to_string(unsigned int step); -unsigned int compute_fsl_memctl_config_regs(const memctl_options_t *popts, +unsigned int compute_fsl_memctl_config_regs(const unsigned int ctrl_num, + const memctl_options_t *popts, fsl_ddr_cfg_regs_t *ddr, const common_timing_params_t *common_dimm, const dimm_params_t *dimm_parameters, unsigned int dbw_capacity_adjust, unsigned int size_only); unsigned int compute_lowest_common_dimm_parameters( + const unsigned int ctrl_num, const dimm_params_t *dimm_params, common_timing_params_t *outpdimm, unsigned int number_of_dimms); @@ -108,13 +111,15 @@ unsigned int populate_memctl_options(int all_dimms_registered, unsigned int ctrl_num); void check_interleaving_options(fsl_ddr_info_t *pinfo); -unsigned int mclk_to_picos(unsigned int mclk); -unsigned int get_memory_clk_period_ps(void); -unsigned int picos_to_mclk(unsigned int picos); +unsigned int mclk_to_picos(const unsigned int ctrl_num, unsigned int mclk); +unsigned int get_memory_clk_period_ps(const unsigned int ctrl_num); +unsigned int picos_to_mclk(const unsigned int ctrl_num, unsigned int picos); void fsl_ddr_set_lawbar( const common_timing_params_t *memctl_common_params, unsigned int memctl_interleaved, unsigned int ctrl_num); +void fsl_ddr_sync_memctl_refresh(unsigned int first_ctrl, + unsigned int last_ctrl); int fsl_ddr_interactive_env_var_exists(void); unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo, int var_is_set); diff --git a/include/fsl_ddr_dimm_params.h b/include/fsl_ddr_dimm_params.h index 09a67a6802..751e935117 100644 --- a/include/fsl_ddr_dimm_params.h +++ b/include/fsl_ddr_dimm_params.h @@ -112,7 +112,7 @@ typedef struct dimm_params_s { #endif } dimm_params_t; -extern unsigned int ddr_compute_dimm_parameters( +unsigned int ddr_compute_dimm_parameters(const unsigned int ctrl_num, const generic_spd_eeprom_t *spd, dimm_params_t *pdimm, unsigned int dimm_number); diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h index c1b6648591..313fa1e312 100644 --- a/include/fsl_esdhc.h +++ b/include/fsl_esdhc.h @@ -108,6 +108,7 @@ #define XFERTYP_RSPTYP_48_BUSY 0x00030000 #define XFERTYP_MSBSEL 0x00000020 #define XFERTYP_DTDSEL 0x00000010 +#define XFERTYP_DDREN 0x00000008 #define XFERTYP_AC12EN 0x00000004 #define XFERTYP_BCEN 0x00000002 #define XFERTYP_DMAEN 0x00000001 diff --git a/include/fsl_sec.h b/include/fsl_sec.h index aa850a3bf1..b6e6f04a34 100644 --- a/include/fsl_sec.h +++ b/include/fsl_sec.h @@ -175,6 +175,32 @@ struct jr_regs { u32 jrcr; }; +/* + * Scatter Gather Entry - Specifies the the Scatter Gather Format + * related information + */ +struct sg_entry { +#ifdef CONFIG_SYS_FSL_SEC_LE + uint32_t addr_lo; /* Memory Address - lo */ + uint16_t addr_hi; /* Memory Address of start of buffer - hi */ + uint16_t reserved_zero; +#else + uint16_t reserved_zero; + uint16_t addr_hi; /* Memory Address of start of buffer - hi */ + uint32_t addr_lo; /* Memory Address - lo */ +#endif + + uint32_t len_flag; /* Length of the data in the frame */ +#define SG_ENTRY_LENGTH_MASK 0x3FFFFFFF +#define SG_ENTRY_EXTENSION_BIT 0x80000000 +#define SG_ENTRY_FINAL_BIT 0x40000000 + uint32_t bpid_offset; +#define SG_ENTRY_BPID_MASK 0x00FF0000 +#define SG_ENTRY_BPID_SHIFT 16 +#define SG_ENTRY_OFFSET_MASK 0x00001FFF +#define SG_ENTRY_OFFSET_SHIFT 0 +}; + int sec_init(void); #endif diff --git a/include/hw_sha.h b/include/hw_sha.h index 783350d513..ab19a99188 100644 --- a/include/hw_sha.h +++ b/include/hw_sha.h @@ -7,7 +7,7 @@ */ #ifndef __HW_SHA_H #define __HW_SHA_H - +#include /** * Computes hash value of input pbuf using h/w acceleration @@ -34,4 +34,43 @@ void hw_sha256(const uchar * in_addr, uint buflen, */ void hw_sha1(const uchar * in_addr, uint buflen, uchar * out_addr, uint chunk_size); + +/* + * Create the context for sha progressive hashing using h/w acceleration + * + * @algo: Pointer to the hash_algo struct + * @ctxp: Pointer to the pointer of the context for hashing + * @return 0 if ok, -ve on error + */ +int hw_sha_init(struct hash_algo *algo, void **ctxp); + +/* + * Update buffer for sha progressive hashing using h/w acceleration + * + * The context is freed by this function if an error occurs. + * + * @algo: Pointer to the hash_algo struct + * @ctx: Pointer to the context for hashing + * @buf: Pointer to the buffer being hashed + * @size: Size of the buffer being hashed + * @is_last: 1 if this is the last update; 0 otherwise + * @return 0 if ok, -ve on error + */ +int hw_sha_update(struct hash_algo *algo, void *ctx, const void *buf, + unsigned int size, int is_last); + +/* + * Copy sha hash result at destination location + * + * The context is freed after completion of hash operation or after an error. + * + * @algo: Pointer to the hash_algo struct + * @ctx: Pointer to the context for hashing + * @dest_buf: Pointer to the destination buffer where hash is to be copied + * @size: Size of the buffer being hashed + * @return 0 if ok, -ve on error + */ +int hw_sha_finish(struct hash_algo *algo, void *ctx, void *dest_buf, + int size); + #endif diff --git a/lib/Kconfig b/lib/Kconfig index a1f30a2c4e..c9d2767d1d 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -29,4 +29,40 @@ config SYS_HZ source lib/rsa/Kconfig +menu "Hashing Support" + +config SHA1 + bool "Enable SHA1 support" + help + This option enables support of hashing using SHA1 algorithm. + The hash is calculated in software. + The SHA1 algorithm produces a 160-bit (20-byte) hash value + (digest). + +config SHA256 + bool "Enable SHA256 support" + help + This option enables support of hashing using SHA256 algorithm. + The hash is calculated in software. + The SHA256 algorithm produces a 256-bit (32-byte) hash value + (digest). + +config SHA_HW_ACCEL + bool "Enable hashing using hardware" + help + This option enables hardware acceleration + for SHA1/SHA256 hashing. + This affects the 'hash' command and also the + hash_lookup_algo() function. + +config SHA_PROG_HW_ACCEL + bool "Enable Progressive hashing support using hardware" + depends on SHA_HW_ACCEL + help + This option enables hardware-acceleration for + SHA1/SHA256 progressive hashing. + Data can be streamed in a block at a time and the hashing + is performed in hardware. +endmenu + endmenu