redonkable
/
remarkable-uboot
1
0
Fork 0
Code Releases Activity

Enable XAUI interface for B4860QDS 

- Added SERDES2 PRTCLs = 0x98, 0x9E
- Default Phy Addresses for Teranetics PHY on XAUI card
	The PHY addresses of Teranetics PHY on XAUI riser card are assigned
	based on the slot it is in. Switches SW4[2:4] and SW6[2:4] on
	AMC2PEX-2S On B4860QDS, AMC2PEX card decide the PHY addresses on slot1
        and slot2
- Configure MDIO for 10Gig Mac

Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
utp
Suresh Gupta 2013-03-25 07:40:13 +00:00 committed by Andy Fleming
parent 49e946cb6a
commit 16d88f415a
3 changed files with 44 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

35
board/freescale/b4860qds/eth_b4860qds.c
View File

@ -275,6 +275,24 @@ int board_eth_init(bd_t *bis)
fm_info_set_phy_address(FM1_DTSEC4,
CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR);
break;
case 0x98:
/* XAUI in Slot1 and Slot2 */
debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC1: %x\n",
CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
fm_info_set_phy_address(FM1_10GEC1,
CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC2: %x\n",
CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
fm_info_set_phy_address(FM1_10GEC2,
CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
break;
case 0x9E:
/* XAUI in Slot2 */
debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC2: %x\n",
CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
fm_info_set_phy_address(FM1_10GEC2,
CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
break;
default:
printf("Fman: Unsupported SerDes2 Protocol 0x%02x\n",
serdes2_prtcl);
@ -300,6 +318,23 @@ int board_eth_init(bd_t *bis)
}
}
for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
int idx = i - FM1_10GEC1;
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_XGMII:
fm_info_set_mdio(i,
miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME));
break;
default:
printf("Fman1: 10GSEC%u set to unknown interface %i\n",
idx + 1, fm_info_get_enet_if(i));
fm_info_set_phy_address(i, 0);
break;
}
}
cpu_eth_init(bis);
#endif

6
drivers/net/fm/b4860.c
View File

@ -55,8 +55,10 @@ phy_interface_t fman_port_enet_if(enum fm_port port)
if (is_device_disabled(port))
return PHY_INTERFACE_MODE_NONE;
if ((port == FM1_10GEC1 || port == FM1_10GEC2)
&& (is_serdes_configured(XAUI_FM1)))
/*B4860 has two 10Gig Mac*/
if ((port == FM1_10GEC1 || port == FM1_10GEC2) &&
((is_serdes_configured(XAUI_FM1_MAC9)) ||
(is_serdes_configured(XAUI_FM1_MAC10))))
return PHY_INTERFACE_MODE_XGMII;
/* Fix me need to handle RGMII here first */

6
include/configs/B4860QDS.h
View File

@ -623,7 +623,11 @@ unsigned long get_board_ddr_clk(void);
#ifdef CONFIG_FMAN_ENET
#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x10
#define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR 0x11
#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4
/*B4860 QDS AMC2PEX-2S default PHY_ADDR */
#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7 /*SLOT 1*/
#define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6 /*SLOT 2*/
#define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c
#define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d