From 2a5558399828e24fce9e948288a88cd28887875e Mon Sep 17 00:00:00 2001 From: Qianyu Gong Date: Fri, 1 Apr 2016 17:52:53 +0800 Subject: [PATCH] armv8: ls1043a: load Fman ucode from SD/MMC under SD boot Signed-off-by: Gong Qianyu Reviewed-by: York Sun --- include/configs/ls1043a_common.h | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index 2432531358..e900c50565 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -216,7 +216,15 @@ /* Store Fman ucode at offeset 0x160000(11 blocks). */ #define CONFIG_SYS_QE_FMAN_FW_IN_NAND #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) -#elif defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) +#elif defined(CONFIG_SD_BOOT) +/* + * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is + * about 1MB (2040 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 2040 + 16 = 2064, enlarge it to 2080(0x820). + */ +#define CONFIG_SYS_QE_FMAN_FW_IN_MMC +#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) +#elif defined(CONFIG_QSPI_BOOT) #define CONFIG_SYS_QE_FW_IN_SPIFLASH #define CONFIG_SYS_FMAN_FW_ADDR 0x400d0000 #define CONFIG_ENV_SPI_BUS 0