rockchip: Add basic support for evb-rv1108 board

Add basic support for rv1108 evb, whith this patch we
can boot into u-boot console.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Andy Yan 2017-06-01 18:01:31 +08:00 committed by Simon Glass
parent 2c1e11dd52
commit 2d1951fec6
11 changed files with 747 additions and 1 deletions

View file

@ -46,7 +46,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3368-px5-evb.dtb \
rk3399-evb.dtb \
rk3399-firefly.dtb \
rk3399-puma.dtb
rk3399-puma.dtb \
rv1108-evb.dtb
dtb-$(CONFIG_ARCH_MESON) += \
meson-gxbb-odroidc2.dtb
dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \

View file

@ -0,0 +1,54 @@
/*
* (C) Copyright 2016 Rockchip Electronics Co., Ltd
*
* SPDX-License-Identifier: GPL-2.0+
*/
/dts-v1/;
#include "rv1108.dtsi"
/ {
model = "Rockchip RV1108 Evaluation board";
compatible = "rockchip,rv1108-evb", "rockchip,rv1108";
memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x08000000>;
};
chosen {
stdout-path = "serial2:1500000n8";
};
};
&gmac {
status = "okay";
clock_in_out = <0>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_LOW>;
};
&sfc {
status = "okay";
flash@0 {
compatible = "gd25q256","spi-flash";
reg = <0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <1>;
spi-max-frequency = <96000000>;
};
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};

479
arch/arm/dts/rv1108.dtsi Normal file
View file

@ -0,0 +1,479 @@
/*
* (C) Copyright 2016 Rockchip Electronics Co., Ltd
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/rv1108-cru.h>
#include <dt-bindings/pinctrl/rockchip.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "rockchip,rv1108";
interrupt-parent = <&gic>;
aliases {
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
spi0 = &sfc;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@f00 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0xf00>;
};
};
arm-pmu {
compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
clock-frequency = <24000000>;
};
xin24m: oscillator {
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "xin24m";
#clock-cells = <0>;
};
amba {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
pdma: pdma@102a0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x102a0000 0x4000>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
arm,pl330-broken-no-flushp;
clocks = <&cru ACLK_DMAC>;
clock-names = "apb_pclk";
};
};
bus_intmem@10080000 {
compatible = "mmio-sram";
reg = <0x10080000 0x2000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x10080000 0x2000>;
};
uart2: serial@10210000 {
compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
reg = <0x10210000 0x100>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clock-frequency = <24000000>;
clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
clock-names = "baudclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart2m0_xfer>;
status = "disabled";
};
uart1: serial@10220000 {
compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
reg = <0x10220000 0x100>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clock-frequency = <24000000>;
clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
clock-names = "baudclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart1_xfer>;
status = "disabled";
};
uart0: serial@10230000 {
compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
reg = <0x10230000 0x100>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clock-frequency = <24000000>;
clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
clock-names = "baudclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
status = "disabled";
};
grf: syscon@10300000 {
compatible = "rockchip,rv1108-grf", "syscon";
reg = <0x10300000 0x1000>;
};
pmugrf: syscon@20060000 {
compatible = "rockchip,rv1108-pmugrf", "syscon";
reg = <0x20060000 0x1000>;
};
cru: clock-controller@20200000 {
compatible = "rockchip,rv1108-cru";
reg = <0x20200000 0x1000>;
rockchip,grf = <&grf>;
#clock-cells = <1>;
#reset-cells = <1>;
};
emmc: dwmmc@30110000 {
compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
clock-freq-min-max = <400000 150000000>;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x30110000 0x4000>;
status = "disabled";
};
sdio: dwmmc@30120000 {
compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
clock-freq-min-max = <400000 150000000>;
clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
<&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x30120000 0x4000>;
status = "disabled";
};
sdmmc: dwmmc@30130000 {
compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
clock-freq-min-max = <400000 100000000>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x30130000 0x4000>;
status = "disabled";
};
sfc: sfc@301c0000 {
compatible = "rockchip,sfc";
reg = <0x301c0000 0x200>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
clock-names = "clk_sfc", "hclk_sfc";
pinctrl-0 = <&sfc_pins>;
pinctrl-names = "default";
status = "disabled";
};
gmac: ethernet@30200000 {
compatible = "rockchip,rv1108-gmac";
reg = <0x30200000 0x10000>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
rockchip,grf = <&grf>;
clocks = <&cru SCLK_MAC>,
<&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
<&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
<&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
clock-names = "stmmaceth",
"mac_clk_rx", "mac_clk_tx",
"clk_mac_ref", "clk_mac_refout",
"aclk_mac", "pclk_mac";
pinctrl-names = "default";
pinctrl-0 = <&rmii_pins>;
phy-mode = "rmii";
max-speed = <100>;
status = "disabled";
};
gic: interrupt-controller@32010000 {
compatible = "arm,gic-400";
interrupt-controller;
#interrupt-cells = <3>;
#address-cells = <0>;
reg = <0x32011000 0x1000>,
<0x32012000 0x1000>,
<0x32014000 0x2000>,
<0x32016000 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
};
pinctrl: pinctrl {
compatible = "rockchip,rv1108-pinctrl";
rockchip,grf = <&grf>;
rockchip,pmu = <&pmugrf>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
gpio0: gpio0@20030000 {
compatible = "rockchip,gpio-bank";
reg = <0x20030000 0x100>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&xin24m>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio1: gpio1@10310000 {
compatible = "rockchip,gpio-bank";
reg = <0x10310000 0x100>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&xin24m>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio2@10320000 {
compatible = "rockchip,gpio-bank";
reg = <0x10320000 0x100>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&xin24m>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio3@10330000 {
compatible = "rockchip,gpio-bank";
reg = <0x10330000 0x100>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&xin24m>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pcfg_pull_up: pcfg-pull-up {
bias-pull-up;
};
pcfg_pull_down: pcfg-pull-down {
bias-pull-down;
};
pcfg_pull_none: pcfg-pull-none {
bias-disable;
};
pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
drive-strength = <8>;
};
pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma {
drive-strength = <12>;
};
pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
bias-pull-up;
drive-strength = <8>;
};
pcfg_pull_none_drv_4ma: pcfg-pull-none-drv-4ma {
drive-strength = <4>;
};
pcfg_pull_up_drv_4ma: pcfg-pull-up-drv-4ma {
bias-pull-up;
drive-strength = <4>;
};
pcfg_output_high: pcfg-output-high {
output-high;
};
pcfg_output_low: pcfg-output-low {
output-low;
};
pcfg_input_high: pcfg-input-high {
bias-pull-up;
input-enable;
};
gmac {
rmii_pins: rmii-pins {
rockchip,pins = <1 RK_PC5 RK_FUNC_2 &pcfg_pull_none>,
<1 RK_PC3 RK_FUNC_2 &pcfg_pull_none>,
<1 RK_PC4 RK_FUNC_2 &pcfg_pull_none>,
<1 RK_PB2 RK_FUNC_3 &pcfg_pull_none_drv_12ma>,
<1 RK_PB3 RK_FUNC_3 &pcfg_pull_none_drv_12ma>,
<1 RK_PB4 RK_FUNC_3 &pcfg_pull_none_drv_12ma>,
<1 RK_PB5 RK_FUNC_3 &pcfg_pull_none>,
<1 RK_PB6 RK_FUNC_3 &pcfg_pull_none>,
<1 RK_PB7 RK_FUNC_3 &pcfg_pull_none>,
<1 RK_PC2 RK_FUNC_3 &pcfg_pull_none>;
};
};
i2c1 {
i2c1_xfer: i2c1-xfer {
rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>,
<2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>;
};
};
i2c2m1 {
i2c2m1_xfer: i2c2m1-xfer {
rockchip,pins = <0 RK_PC2 RK_FUNC_2 &pcfg_pull_none>,
<0 RK_PC6 RK_FUNC_3 &pcfg_pull_none>;
};
i2c2m1_gpio: i2c2m1-gpio {
rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,
<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
i2c2m05v {
i2c2m05v_xfer: i2c2m05v-xfer {
rockchip,pins = <1 RK_PD5 RK_FUNC_2 &pcfg_pull_none>,
<1 RK_PD4 RK_FUNC_2 &pcfg_pull_none>;
};
i2c2m05v_gpio: i2c2m05v-gpio {
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
<1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
i2c3 {
i2c3_xfer: i2c3-xfer {
rockchip,pins = <0 RK_PB6 RK_FUNC_1 &pcfg_pull_none>,
<0 RK_PC4 RK_FUNC_2 &pcfg_pull_none>;
};
};
sfc {
sfc_pins: sfc-pins {
rockchip,pins = <2 RK_PA3 RK_FUNC_3 &pcfg_pull_none>,
<2 RK_PA2 RK_FUNC_3 &pcfg_pull_none>,
<2 RK_PA1 RK_FUNC_3 &pcfg_pull_none>,
<2 RK_PA0 RK_FUNC_3 &pcfg_pull_none>,
<2 RK_PB7 RK_FUNC_2 &pcfg_pull_none>,
<2 RK_PB4 RK_FUNC_3 &pcfg_pull_none>;
};
};
sdmmc {
sdmmc_clk: sdmmc-clk {
rockchip,pins = <3 RK_PC4 RK_FUNC_1 &pcfg_pull_none_drv_4ma>;
};
sdmmc_cmd: sdmmc-cmd {
rockchip,pins = <3 RK_PC5 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
};
sdmmc_cd: sdmmc-cd {
rockchip,pins = <0 RK_PA1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
};
sdmmc_bus1: sdmmc-bus1 {
rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
};
sdmmc_bus4: sdmmc-bus4 {
rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
<3 RK_PC2 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
<3 RK_PC1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
<3 RK_PC0 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
};
};
uart0 {
uart0_xfer: uart0-xfer {
rockchip,pins = <3 RK_PA6 RK_FUNC_1 &pcfg_pull_up>,
<3 RK_PA5 RK_FUNC_1 &pcfg_pull_none>;
};
uart0_cts: uart0-cts {
rockchip,pins = <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none>;
};
uart0_rts: uart0-rts {
rockchip,pins = <3 RK_PA3 RK_FUNC_1 &pcfg_pull_none>;
};
uart0_rts_gpio: uart0-rts-gpio {
rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
uart1 {
uart1_xfer: uart1-xfer {
rockchip,pins = <1 RK_PD3 RK_FUNC_1 &pcfg_pull_up>,
<1 RK_PD2 RK_FUNC_1 &pcfg_pull_none>;
};
uart1_cts: uart1-cts {
rockchip,pins = <1 RK_PD0 RK_FUNC_1 &pcfg_pull_none>;
};
uart01rts: uart1-rts {
rockchip,pins = <1 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
};
};
uart2m0 {
uart2m0_xfer: uart2m0-xfer {
rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>,
<2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
};
};
uart2m1 {
uart2m1_xfer: uart2m1-xfer {
rockchip,pins = <3 RK_PC3 RK_FUNC_2 &pcfg_pull_up>,
<3 RK_PC2 RK_FUNC_2 &pcfg_pull_none>;
};
};
uart2_5v {
uart2_5v_cts: uart2_5v-cts {
rockchip,pins = <1 RK_PD4 RK_FUNC_1 &pcfg_pull_none>;
};
uart2_5v_rts: uart2_5v-rts {
rockchip,pins = <1 RK_PD5 RK_FUNC_1 &pcfg_pull_none>;
};
};
};
};

View file

@ -1,9 +1,28 @@
if ROCKCHIP_RV1108
config TARGET_EVB_RV1108
bool "EVB_RV1108"
help
RV1108 EVB is a evaluation board for Rockchp RV1108.
Key features of the board include:
* one macro USB OTG port
* one USB HOST port
* one RS232 to USB port route to UART2 as debug port
* MIPI screen with resolution 720 x 1280
* 128M DDR3
* 64M SPI Nor Flash
* macro SD card interface
* HDMI output
* 10/100 Mbps Ethernet
* camera interface compatible with imx323 / ov2710 / ov4689
config SYS_SOC
default "rockchip"
config SYS_MALLOC_F_LEN
default 0x400
source board/rockchip/evb_rv1108/Kconfig
endif

View file

@ -0,0 +1,15 @@
if TARGET_EVB_RV1108
config SYS_BOARD
default "evb_rv1108"
config SYS_VENDOR
default "rockchip"
config SYS_CONFIG_NAME
default "evb_rv1108"
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
endif

View file

@ -0,0 +1,6 @@
EVB-RV1108
M: Andy Yan <andy.yan@rock-chips.com>
S: Maintained
F: board/rockchip/evb_rv1108
F: include/configs/evb_rv1108.h
F: configs/evb-rv1108_defconfig

View file

@ -0,0 +1,7 @@
#
# (C) Copyright 2016 Rockchip Electronics Co., Ltd
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y += evb_rv1108.o

View file

@ -0,0 +1,47 @@
Here is the step-by-step to boot U-Boot on rv1108 evb.
Get ddr init binary
==============================================================================
> git clone https://github.com/rockchip-linux/rkbin.git
> dd if=./rkbin/rv1x/rv1108ddr.bin of=ddr.bin bs=4 skip=1
Compile U-Boot
===========================
> make CROSS_COMPILE=arm-linux-gnueabi- evb-rv1108_defconfig all
> ./tools/mkimage -n rv1108 -T rksd -d ddr.bin spl.bin
> cat spl.bin u-boot.bin > u-boot.img
Flash the image by rkdeveloptool
================================
rkdeveloptool can get from https://github.com/rockchip-linux/rkdeveloptool.git
Power on(or reset with RESET KEY) with MASKROM KEY preesed, and then:
> rkdeveloptool db ./rkbin/rv1x/RV1108_usb_boot.bin
> rkdeveloptool wl 0x40 u-boot.img
> rkdeveloptool RD
You should be able to get U-Boot log message from boot console:
DDR Version V1.02 20170220
In
400MHz
DDR3
Bus Width=16 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=512MB
mach:2
OUT
U-Boot 2017.05-00693-g3a5b171 (Jun 01 2017 - 17:37:53 +0800)
Model: Rockchip RV1108 Evaluation board
DRAM: 128 MiB
APLL: 600000000 DPLL:792000000 GPLL:384000000
MMC:
Using default environment
In: serial@10210000
Out: serial@10210000
Err: serial@10210000
Net: No ethernet found.
Hit any key to stop autoboot: 0
=>

View file

@ -0,0 +1,52 @@
/*
* (C)Copyright 2016 Rockchip Electronics Co., Ltd
* Authors: Andy Yan <andy.yan@rock-chips.com>
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <fdtdec.h>
#include <asm/arch/grf_rv1108.h>
#include <asm/arch/hardware.h>
DECLARE_GLOBAL_DATA_PTR;
int mach_cpu_init(void)
{
int node;
struct rv1108_grf *grf;
node = fdt_node_offset_by_compatible(gd->fdt_blob, -1, "rockchip,rv1108-grf");
grf = (struct rv1108_grf *)fdtdec_get_addr(gd->fdt_blob, node, "reg");
/*evb board use UART2 m0 for debug*/
rk_clrsetreg(&grf->gpio2d_iomux,
GPIO2D2_MASK | GPIO2D1_MASK,
GPIO2D2_UART2_SOUT_M0 << GPIO2D2_SHIFT |
GPIO2D1_UART2_SIN_M0 << GPIO2D1_SHIFT);
rk_clrreg(&grf->gpio3c_iomux, GPIO3C3_MASK | GPIO3C2_MASK);
return 0;
}
int board_init(void)
{
return 0;
}
int dram_init(void)
{
gd->ram_size = 0x8000000;
return 0;
}
int dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = 0x60000000;
gd->bd->bi_dram[0].size = 0x8000000;
return 0;
}

View file

@ -0,0 +1,40 @@
CONFIG_ARM=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_ROCKCHIP_RV1108=y
CONFIG_TARGET_EVB_RV1108=y
CONFIG_DEFAULT_DEVICE_TREE="rv1108-evb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_SF=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_CLK=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_GMAC_ROCKCHIP=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_ROCKCHIP_RV1108=y
CONFIG_RAM=y
CONFIG_BAUDRATE=1500000
# CONFIG_SPL_SERIAL_PRESENT is not set
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_BASE=0x10210000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYSRESET=y
CONFIG_ERRNO_STR=y

View file

@ -0,0 +1,26 @@
/*
* (C) Copyright 2016 Rockchip Electronics Co., Ltd
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <configs/rv1108_common.h>
/*
* Default environment settings
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"ipaddr=172.16.12.50\0" \
"serverip=172.16.12.69\0" \
""
#define CONFIG_BOOTCOMMAND \
"sf probe;" \
"sf read 0x62000000 0x140800 0x500000;" \
"dcache off;" \
"go 0x62000000"
#endif