ppc7xx: Update CPCI750 board

This small CPCI750 update extends the board specific command
"show_config" to display the Marvell strapping registers and
extends the PCI IDE controller.

Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Signed-off-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Stefan Roese 2007-06-22 17:32:28 +02:00 committed by Wolfgang Denk
parent ed4058afc8
commit 2d78074d2e
2 changed files with 87 additions and 4 deletions

View file

@ -55,6 +55,71 @@
#define DP(x)
#endif
static char show_config_tab[][15] = {{"PCI0DLL_2 "}, /* 31 */
{"PCI0DLL_1 "}, /* 30 */
{"PCI0DLL_0 "}, /* 29 */
{"PCI1DLL_2 "}, /* 28 */
{"PCI1DLL_1 "}, /* 27 */
{"PCI1DLL_0 "}, /* 26 */
{"BbEP2En "}, /* 25 */
{"SDRAMRdDataDel"}, /* 24 */
{"SDRAMRdDel "}, /* 23 */
{"SDRAMSync "}, /* 22 */
{"SDRAMPipeSel_1"}, /* 21 */
{"SDRAMPipeSel_0"}, /* 20 */
{"SDRAMAddDel "}, /* 19 */
{"SDRAMClkSel "}, /* 18 */
{"Reserved(1!) "}, /* 17 */
{"PCIRty "}, /* 16 */
{"BootCSWidth_1 "}, /* 15 */
{"BootCSWidth_0 "}, /* 14 */
{"PCI1PadsCal "}, /* 13 */
{"PCI0PadsCal "}, /* 12 */
{"MultiMVId_1 "}, /* 11 */
{"MultiMVId_0 "}, /* 10 */
{"MultiGTEn "}, /* 09 */
{"Int60xArb "}, /* 08 */
{"CPUBusConfig_1"}, /* 07 */
{"CPUBusConfig_0"}, /* 06 */
{"DefIntSpc "}, /* 05 */
{0 }, /* 04 */
{"SROMAdd_1 "}, /* 03 */
{"SROMAdd_0 "}, /* 02 */
{"DRAMPadCal "}, /* 01 */
{"SInitEn "}, /* 00 */
{0 }, /* 31 */
{0 }, /* 30 */
{0 }, /* 29 */
{0 }, /* 28 */
{0 }, /* 27 */
{0 }, /* 26 */
{0 }, /* 25 */
{0 }, /* 24 */
{0 }, /* 23 */
{0 }, /* 22 */
{"JTAGCalBy "}, /* 21 */
{"GB2Sel "}, /* 20 */
{"GB1Sel "}, /* 19 */
{"DRAMPLL_MDiv_5"}, /* 18 */
{"DRAMPLL_MDiv_4"}, /* 17 */
{"DRAMPLL_MDiv_3"}, /* 16 */
{"DRAMPLL_MDiv_2"}, /* 15 */
{"DRAMPLL_MDiv_1"}, /* 14 */
{"DRAMPLL_MDiv_0"}, /* 13 */
{"GB0Sel "}, /* 12 */
{"DRAMPLLPU "}, /* 11 */
{"DRAMPLL_HIKVCO"}, /* 10 */
{"DRAMPLLNP "}, /* 09 */
{"DRAMPLL_NDiv_7"}, /* 08 */
{"DRAMPLL_NDiv_6"}, /* 07 */
{"CPUPadCal "}, /* 06 */
{"DRAMPLL_NDiv_5"}, /* 05 */
{"DRAMPLL_NDiv_4"}, /* 04 */
{"DRAMPLL_NDiv_3"}, /* 03 */
{"DRAMPLL_NDiv_2"}, /* 02 */
{"DRAMPLL_NDiv_1"}, /* 01 */
{"DRAMPLL_NDiv_0"}}; /* 00 */
extern void flush_data_cache (void);
extern void invalidate_l1_instruction_cache (void);
extern flash_info_t flash_info[];
@ -901,21 +966,37 @@ void board_prebootm_init ()
dcache_disable ();
}
int do_show_cfg(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
int do_show_config(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
unsigned int reset_sample_low;
unsigned int reset_sample_high;
unsigned int l, l1, l2;
GT_REG_READ(0x3c4, &reset_sample_low);
GT_REG_READ(0x3d4, &reset_sample_high);
printf("Reset configuration 0x%08x 0x%08x\n", reset_sample_low, reset_sample_high);
l2 = 0;
for (l=0; l<63; l++) {
if (show_config_tab[l][0] != 0) {
printf("%14s:%1x ", show_config_tab[l],
((reset_sample_low >> (31 - (l & 0x1f)))) & 0x01);
l2++;
if ((l2 % 4) == 0)
printf("\n");
} else {
l1++;
}
if (l == 32)
reset_sample_low = reset_sample_high;
}
printf("\n");
return(0);
}
U_BOOT_CMD(
show_cfg, 1, 1, do_show_cfg,
"show_cfg- Show Marvell strapping register\n",
show_config, 1, 1, do_show_config,
"show_config - Show Marvell strapping register\n",
"Show Marvell strapping register (ResetSampleLow ResetSampleHigh)\n"
);

View file

@ -43,6 +43,8 @@ int ide_preinit (void)
ide_bus_offset[l] = -ATA_STATUS;
}
devbusfn = pci_find_device (0x1103, 0x0004, 0);
if (devbusfn == -1)
devbusfn = pci_find_device (0x1095, 0x3114, 0);
if (devbusfn != -1) {
status = 0;