1
0
Fork 0

Merge branch 'master' of git://git.denx.de/u-boot-mmc

utp
Tom Rini 2015-01-06 10:44:47 -05:00
commit 2ed3f91143
3 changed files with 78 additions and 47 deletions

View File

@ -172,11 +172,24 @@ void spl_mmc_load_image(void)
err = mmc_load_image_raw_sector(mmc,
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR);
#endif
} else {
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
puts("spl: wrong MMC boot mode\n");
}
switch(boot_mode){
case MMCSD_MODE_RAW:
#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
case MMCSD_MODE_FS:
#endif
hang();
#ifdef CONFIG_SUPPORT_EMMC_BOOT
case MMCSD_MODE_EMMCBOOT:
#endif
/* Boot mode is ok. Nothing to do. */
break;
case MMCSD_MODE_UNDEFINED:
default:
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
puts("spl: wrong MMC boot mode\n");
#endif
hang();
}
if (err)

View File

@ -1,7 +1,7 @@
/*
* Marvell MMC/SD/SDIO driver
*
* (C) Copyright 2012
* (C) Copyright 2012-2014
* Marvell Semiconductor <www.marvell.com>
* Written-by: Maen Suleiman, Gerald Kerma
*
@ -23,6 +23,8 @@ DECLARE_GLOBAL_DATA_PTR;
#define MVEBU_TARGET_DRAM 0
#define TIMEOUT_DELAY 5*CONFIG_SYS_HZ /* wait 5 seconds */
static void mvebu_mmc_write(u32 offs, u32 val)
{
writel(val, CONFIG_SYS_MMC_BASE + (offs));
@ -63,37 +65,47 @@ static int mvebu_mmc_setup_data(struct mmc_data *data)
static int mvebu_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
struct mmc_data *data)
{
int timeout = 10;
ulong start;
ushort waittype = 0;
ushort resptype = 0;
ushort xfertype = 0;
ushort resp_indx = 0;
debug("cmdidx [0x%x] resp_type[0x%x] cmdarg[0x%x]\n",
cmd->cmdidx, cmd->resp_type, cmd->cmdarg);
udelay(10*1000);
debug("%s: cmdidx [0x%x] resp_type[0x%x] cmdarg[0x%x]\n",
DRIVER_NAME, cmd->cmdidx, cmd->resp_type, cmd->cmdarg);
debug("%s: cmd %d (hw state 0x%04x)\n", DRIVER_NAME,
cmd->cmdidx, mvebu_mmc_read(SDIO_HW_STATE));
/* Checking if card is busy */
while ((mvebu_mmc_read(SDIO_HW_STATE) & CARD_BUSY)) {
if (timeout == 0) {
printf("%s: card busy!\n", DRIVER_NAME);
return -1;
}
timeout--;
udelay(1000);
/*
* Hardware weirdness. The FIFO_EMPTY bit of the HW_STATE
* register is sometimes not set before a while when some
* "unusual" data block sizes are used (such as with the SWITCH
* command), even despite the fact that the XFER_DONE interrupt
* was raised. And if another data transfer starts before
* this bit comes to good sense (which eventually happens by
* itself) then the new transfer simply fails with a timeout.
*/
if (!(mvebu_mmc_read(SDIO_HW_STATE) & CMD_FIFO_EMPTY)) {
ushort hw_state, count = 0;
start = get_timer(0);
do {
hw_state = mvebu_mmc_read(SDIO_HW_STATE);
if ((get_timer(0) - start) > TIMEOUT_DELAY) {
printf("%s : FIFO_EMPTY bit missing\n",
DRIVER_NAME);
break;
}
count++;
} while (!(hw_state & CMD_FIFO_EMPTY));
debug("%s *** wait for FIFO_EMPTY bit (hw=0x%04x, count=%d, jiffies=%ld)\n",
DRIVER_NAME, hw_state, count, (get_timer(0) - (start)));
}
/* Set up for a data transfer if we have one */
if (data) {
int err = mvebu_mmc_setup_data(data);
if (err)
return err;
}
/* Clear status */
mvebu_mmc_write(SDIO_NOR_INTR_STATUS, SDIO_POLL_MASK);
mvebu_mmc_write(SDIO_ERR_INTR_STATUS, SDIO_POLL_MASK);
resptype = SDIO_CMD_INDEX(cmd->cmdidx);
@ -119,6 +131,14 @@ static int mvebu_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
}
if (data) {
int err = mvebu_mmc_setup_data(data);
if (err) {
debug("%s: command DATA error :%x\n",
DRIVER_NAME, err);
return err;
}
resptype |= SDIO_CMD_DATA_PRESENT | SDIO_CMD_CHECK_DATACRC16;
xfertype |= SDIO_XFER_MODE_HW_WR_DATA_EN;
if (data->flags & MMC_DATA_READ) {
@ -138,17 +158,10 @@ static int mvebu_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
/* Setting Xfer mode */
mvebu_mmc_write(SDIO_XFER_MODE, xfertype);
mvebu_mmc_write(SDIO_NOR_INTR_STATUS, ~SDIO_NOR_CARD_INT);
mvebu_mmc_write(SDIO_ERR_INTR_STATUS, SDIO_POLL_MASK);
/* Sending command */
mvebu_mmc_write(SDIO_CMD, resptype);
mvebu_mmc_write(SDIO_NOR_INTR_EN, SDIO_POLL_MASK);
mvebu_mmc_write(SDIO_ERR_INTR_EN, SDIO_POLL_MASK);
/* Waiting for completion */
timeout = 1000000;
start = get_timer(0);
while (!((mvebu_mmc_read(SDIO_NOR_INTR_STATUS)) & waittype)) {
if (mvebu_mmc_read(SDIO_NOR_INTR_STATUS) & SDIO_NOR_ERROR) {
@ -156,21 +169,20 @@ static int mvebu_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
DRIVER_NAME, cmd->cmdidx,
mvebu_mmc_read(SDIO_ERR_INTR_STATUS));
if (mvebu_mmc_read(SDIO_ERR_INTR_STATUS) &
(SDIO_ERR_CMD_TIMEOUT | SDIO_ERR_DATA_TIMEOUT))
(SDIO_ERR_CMD_TIMEOUT | SDIO_ERR_DATA_TIMEOUT)) {
debug("%s: command READ timed out\n",
DRIVER_NAME);
return TIMEOUT;
}
debug("%s: command READ error\n", DRIVER_NAME);
return COMM_ERR;
}
timeout--;
udelay(1);
if (timeout <= 0) {
printf("%s: command timed out\n", DRIVER_NAME);
if ((get_timer(0) - start) > TIMEOUT_DELAY) {
debug("%s: command timed out\n", DRIVER_NAME);
return TIMEOUT;
}
}
if (mvebu_mmc_read(SDIO_ERR_INTR_STATUS) &
(SDIO_ERR_CMD_TIMEOUT | SDIO_ERR_DATA_TIMEOUT))
return TIMEOUT;
/* Handling response */
if (cmd->resp_type & MMC_RSP_136) {
@ -204,6 +216,11 @@ static int mvebu_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
cmd->response[1] = ((response[0] & 0xfc00) >> 10);
cmd->response[2] = 0;
cmd->response[3] = 0;
} else {
cmd->response[0] = 0;
cmd->response[1] = 0;
cmd->response[2] = 0;
cmd->response[3] = 0;
}
debug("%s: resp[0x%x] ", DRIVER_NAME, cmd->resp_type);
@ -213,6 +230,10 @@ static int mvebu_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
debug("[0x%x] ", cmd->response[3]);
debug("\n");
if (mvebu_mmc_read(SDIO_ERR_INTR_STATUS) &
(SDIO_ERR_CMD_TIMEOUT | SDIO_ERR_DATA_TIMEOUT))
return TIMEOUT;
return 0;
}
@ -251,9 +272,8 @@ static void mvebu_mmc_set_clk(unsigned int clock)
if (m > MVEBU_MMC_BASE_DIV_MAX)
m = MVEBU_MMC_BASE_DIV_MAX;
mvebu_mmc_write(SDIO_CLK_DIV, m & MVEBU_MMC_BASE_DIV_MAX);
debug("%s: clock (%d) div : %d\n", DRIVER_NAME, clock, m);
}
udelay(10*1000);
}
static void mvebu_mmc_set_bus(unsigned int bus)
@ -293,7 +313,6 @@ static void mvebu_mmc_set_bus(unsigned int bus)
"high-speed" : "");
mvebu_mmc_write(SDIO_HOST_CTRL, ctrl_reg);
udelay(10*1000);
}
static void mvebu_mmc_set_ios(struct mmc *mmc)
@ -355,7 +374,7 @@ static void mvebu_window_setup(void)
static int mvebu_mmc_initialize(struct mmc *mmc)
{
debug("%s: mvebu_mmc_initialize", DRIVER_NAME);
debug("%s: mvebu_mmc_initialize\n", DRIVER_NAME);
/*
* Setting host parameters
@ -384,8 +403,6 @@ static int mvebu_mmc_initialize(struct mmc *mmc)
/* SW reset */
mvebu_mmc_write(SDIO_SW_RESET, SDIO_SW_RESET_NOW);
udelay(10*1000);
return 0;
}

View File

@ -79,6 +79,7 @@
#define CMD_INHIBIT (1 << 0)
#define CMD_TXACTIVE (1 << 8)
#define CMD_RXACTIVE (1 << 9)
#define CMD_FIFO_EMPTY (1 << 13)
#define CMD_AUTOCMD12ACTIVE (1 << 14)
#define CMD_BUS_BUSY (CMD_AUTOCMD12ACTIVE | \
CMD_RXACTIVE | \