redonkable
/
remarkable-uboot
1
0
Fork 0
Code Releases Activity

armv8: fsl-lsch3: Disable SMMU during secure boot 

During secure boot, SMMU is enabled on POR by SP bootrom. SMMU needs
to be put in bypass mode in uboot to enable CAAM transcations to pass
through.

For non-secure boot, SP BootROM doesn't enable SMMU, which is in
bypass mode out of reset.

Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com>
Signed-off-by: Saksham Jain <saksham.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
utp
Saksham Jain 2016-03-23 16:24:40 +05:30 committed by York Sun
parent 809d343a1a
commit 4a97a0c91d
2 changed files with 32 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
arch/arm/cpu/armv8/fsl-layerscape/soc.c
View File

@ -151,7 +151,14 @@ static void erratum_a009203(void)
#endif
#endif
}
void bypass_smmu(void)
{
u32 val;
val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
out_le32(SMMU_SCR0, val);
val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
out_le32(SMMU_NSCR0, val);
}
void fsl_lsch3_early_init_f(void)
{
erratum_a008751();
@ -160,6 +167,15 @@ void fsl_lsch3_early_init_f(void)
erratum_a009203();
erratum_a008514();
erratum_a008336();
#ifdef CONFIG_CHAIN_OF_TRUST
/* In case of Secure Boot, the IBR configures the SMMU
* to allow only Secure transactions.
* SMMU must be reset in bypass mode.
* Set the ClientPD bit and Clear the USFCFG Bit
*/
if (fsl_check_boot_mode_secure() == 1)
bypass_smmu();
#endif
}
#ifdef CONFIG_SCSI_AHCI_PLAT

15
arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
View File

@ -83,6 +83,21 @@
/* Security Monitor */
#define CONFIG_SYS_SEC_MON_ADDR (CONFIG_SYS_IMMR + 0x00e90000)
/* MMU 500 */
#define SMMU_SCR0 (SMMU_BASE + 0x0)
#define SMMU_SCR1 (SMMU_BASE + 0x4)
#define SMMU_SCR2 (SMMU_BASE + 0x8)
#define SMMU_SACR (SMMU_BASE + 0x10)
#define SMMU_IDR0 (SMMU_BASE + 0x20)
#define SMMU_IDR1 (SMMU_BASE + 0x24)
#define SMMU_NSCR0 (SMMU_BASE + 0x400)
#define SMMU_NSCR2 (SMMU_BASE + 0x408)
#define SMMU_NSACR (SMMU_BASE + 0x410)
#define SCR0_CLIENTPD_MASK 0x00000001
#define SCR0_USFCFG_MASK 0x00000400
/* PCIe */
#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_IMMR + 0x2400000)