redonkable
/
remarkable-uboot
1
0
Fork 0
Code Releases Activity

README: fix documentation of CONFIG_SHOW_BOOT_PROGRESS 

Some previous changes added code right in the middle of the
description of CONFIG_SHOW_BOOT_PROGRESS.  Move this text down.
Fix formatting while we are at it.

Signed-off-by: Wolfgang Denk <wd@denx.de>
utp
Wolfgang Denk 2011-10-07 09:58:21 +02:00
parent e42624bbe0
commit 4cf2609b0f
1 changed files with 35 additions and 35 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

70
README
View File

@ -620,18 +620,18 @@ The following options need to be configured:
the SMC.
- Pre-Console Buffer:
Prior to the console being initialised (i.e. serial UART
initialised etc) all console output is silently discarded.
Defining CONFIG_PRE_CONSOLE_BUFFER will cause U-Boot to
buffer any console messages prior to the console being
initialised to a buffer of size CONFIG_PRE_CON_BUF_SZ
bytes located at CONFIG_PRE_CON_BUF_ADDR. The buffer is
a circular buffer, so if more than CONFIG_PRE_CON_BUF_SZ
bytes are output before the console is initialised, the
earlier bytes are discarded.
Prior to the console being initialised (i.e. serial UART
initialised etc) all console output is silently discarded.
Defining CONFIG_PRE_CONSOLE_BUFFER will cause U-Boot to
buffer any console messages prior to the console being
initialised to a buffer of size CONFIG_PRE_CON_BUF_SZ
bytes located at CONFIG_PRE_CON_BUF_ADDR. The buffer is
a circular buffer, so if more than CONFIG_PRE_CON_BUF_SZ
bytes are output before the console is initialised, the
earlier bytes are discarded.
'Sane' compilers will generate smaller code if
CONFIG_PRE_CON_BUF_SZ is a power of 2
'Sane' compilers will generate smaller code if
CONFIG_PRE_CON_BUF_SZ is a power of 2
- Boot Delay: CONFIG_BOOTDELAY - in seconds
Delay before automatically booting the default image;
@ -2108,28 +2108,6 @@ The following options need to be configured:
example, some LED's) on your board. At the moment,
the following checkpoints are implemented:
- Standalone program support:
CONFIG_STANDALONE_LOAD_ADDR
This option allows to define board specific values
for the address where standalone program gets loaded,
thus overwriting the architecutre dependent default
settings.
- Frame Buffer Address:
CONFIG_FB_ADDR
Define CONFIG_FB_ADDR if you want to use specific address for
frame buffer.
Then system will reserve the frame buffer address to defined address
instead of lcd_setmem (this function grab the memory for frame buffer
by panel's size).
Please see board_init_f function.
If you want this config option then,
please define it at your board config file
Legacy uImage format:
Arg Where When
@ -2283,6 +2261,28 @@ FIT uImage format:
-150 common/cmd_nand.c Incorrect FIT image format
151 common/cmd_nand.c FIT image format OK
- Standalone program support:
CONFIG_STANDALONE_LOAD_ADDR
This option allows to define board specific values
for the address where standalone program gets loaded,
thus overwriting the architecutre dependent default
settings.
- Frame Buffer Address:
CONFIG_FB_ADDR
Define CONFIG_FB_ADDR if you want to use specific
address for frame buffer.
Then system will reserve the frame buffer address to
defined address instead of lcd_setmem (this function
grab the memory for frame buffer by panel's size).
Please see board_init_f function.
If you want this config option then,
please define it at your board config file
- Automatic software updates via TFTP server
CONFIG_UPDATE_TFTP
CONFIG_UPDATE_TFTP_CNT_MAX
@ -2899,8 +2899,8 @@ Low Level (hardware related) configuration options:
* 1ull) << 32 | CONFIG_SYS_CCSRBAR_PHYS_LOW)
- CONFIG_SYS_CCSRBAR_PHYS_HIGH:
Bits 33-36 of CONFIG_SYS_CCSRBAR_PHYS. This value is typically
either 0 (32-bit build) or 0xF (36-bit build). This macro is
Bits 33-36 of CONFIG_SYS_CCSRBAR_PHYS. This value is typically
either 0 (32-bit build) or 0xF (36-bit build). This macro is
used in assembly code, so it must not contain typecasts or
integer size suffixes (e.g. "ULL").