arm: Remove eb_cpu9k2 and eb_cpu9k2_ram boards
These board have not been converted to generic board by the deadline. Remove them. Signed-off-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
parent
5ff33d0404
commit
5522f12b3c
|
@ -8,10 +8,6 @@ config TARGET_AT91RM9200EK
|
|||
bool "Atmel AT91RM9200 evaluation kit"
|
||||
select CPU_ARM920T
|
||||
|
||||
config TARGET_EB_CPUX9K2
|
||||
bool "Support eb_cpux9k2"
|
||||
select CPU_ARM920T
|
||||
|
||||
config TARGET_AT91SAM9260EK
|
||||
bool "Atmel at91sam9260 reference board"
|
||||
select CPU_ARM926EJS
|
||||
|
@ -143,7 +139,6 @@ source "board/atmel/sama5d3_xplained/Kconfig"
|
|||
source "board/atmel/sama5d3xek/Kconfig"
|
||||
source "board/atmel/sama5d4_xplained/Kconfig"
|
||||
source "board/atmel/sama5d4ek/Kconfig"
|
||||
source "board/BuS/eb_cpux9k2/Kconfig"
|
||||
source "board/bluewater/snapper9260/Kconfig"
|
||||
source "board/BuS/vl_ma2sc/Kconfig"
|
||||
source "board/calao/usb_a9263/Kconfig"
|
||||
|
|
|
@ -1,12 +0,0 @@
|
|||
if TARGET_EB_CPUX9K2
|
||||
|
||||
config SYS_BOARD
|
||||
default "eb_cpux9k2"
|
||||
|
||||
config SYS_VENDOR
|
||||
default "BuS"
|
||||
|
||||
config SYS_CONFIG_NAME
|
||||
default "eb_cpux9k2"
|
||||
|
||||
endif
|
|
@ -1,7 +0,0 @@
|
|||
EB_CPUX9K2 BOARD
|
||||
M: Jens Scharsig <esw@bus-elektronik.de>
|
||||
S: Maintained
|
||||
F: board/BuS/eb_cpux9k2/
|
||||
F: include/configs/eb_cpux9k2.h
|
||||
F: configs/eb_cpux9k2_defconfig
|
||||
F: configs/eb_cpux9k2_ram_defconfig
|
|
@ -1,8 +0,0 @@
|
|||
#
|
||||
# (C) Copyright 2003-2006
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y := cpux9k2.o
|
|
@ -1,373 +0,0 @@
|
|||
/*
|
||||
* (C) Copyright 2008-2009
|
||||
* BuS Elektronik GmbH & Co. KG <www.bus-elektronik.de>
|
||||
* Jens Scharsig <esw@bus-elektronik.de>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <exports.h>
|
||||
#include <net.h>
|
||||
#include <netdev.h>
|
||||
#include <nand.h>
|
||||
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/hardware.h>
|
||||
#include <asm/arch/at91_pio.h>
|
||||
#include <asm/arch/at91_pmc.h>
|
||||
#include <asm/arch/at91_mc.h>
|
||||
#include <asm/arch/at91_common.h>
|
||||
|
||||
#ifdef CONFIG_STATUS_LED
|
||||
#include <status_led.h>
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_VIDEO
|
||||
#include <bus_vcxk.h>
|
||||
|
||||
extern unsigned long display_width;
|
||||
extern unsigned long display_height;
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
void cpux9k2_nand_hw_init(void);
|
||||
#endif
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
/*
|
||||
* Miscelaneous platform dependent initialisations
|
||||
*/
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
|
||||
|
||||
/* Correct IRDA resistor problem / Set PA23_TXD in Output */
|
||||
writel(ATMEL_PMX_AA_TXD2, &pio->pioa.oer);
|
||||
|
||||
gd->bd->bi_arch_number = MACH_TYPE_EB_CPUX9K2;
|
||||
/* adress of boot parameters */
|
||||
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
||||
|
||||
#ifdef CONFIG_STATUS_LED
|
||||
status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
|
||||
#endif
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
cpux9k2_nand_hw_init();
|
||||
#endif
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
at91_seriald_hw_init();
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_MISC_INIT_R
|
||||
|
||||
int misc_init_r(void)
|
||||
{
|
||||
uchar mac[8];
|
||||
uchar tm;
|
||||
uchar midx;
|
||||
uchar macn6, macn7;
|
||||
|
||||
if (getenv("ethaddr") == NULL) {
|
||||
if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0x00,
|
||||
CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
|
||||
(uchar *) &mac, sizeof(mac)) != 0) {
|
||||
puts("Error reading MAC from EEPROM\n");
|
||||
} else {
|
||||
tm = 0;
|
||||
macn6 = 0;
|
||||
macn7 = 0xFF;
|
||||
for (midx = 0; midx < 6; midx++) {
|
||||
if ((mac[midx] != 0) && (mac[midx] != 0xFF))
|
||||
tm++;
|
||||
macn6 += mac[midx];
|
||||
macn7 ^= mac[midx];
|
||||
}
|
||||
if ((macn6 != mac[6]) || (macn7 != mac[7]))
|
||||
tm = 0;
|
||||
if (tm)
|
||||
eth_setenv_enetaddr("ethaddr", mac);
|
||||
else
|
||||
puts("Error: invalid MAC at EEPROM\n");
|
||||
}
|
||||
}
|
||||
gd->jt->do_reset = do_reset;
|
||||
|
||||
#ifdef CONFIG_STATUS_LED
|
||||
status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
|
||||
#endif
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_RESET_PHY_R
|
||||
void reset_phy(void)
|
||||
{
|
||||
udelay(10000);
|
||||
eth_init();
|
||||
}
|
||||
#endif
|
||||
|
||||
/*
|
||||
* DRAM initialisations
|
||||
*/
|
||||
|
||||
int dram_init(void)
|
||||
{
|
||||
gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
|
||||
CONFIG_SYS_SDRAM_SIZE);
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Ethernet initialisations
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_DRIVER_AT91EMAC
|
||||
int board_eth_init(bd_t *bis)
|
||||
{
|
||||
int rc = 0;
|
||||
rc = at91emac_register(bis, (u32) ATMEL_BASE_EMAC);
|
||||
return rc;
|
||||
}
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Disk On Chip (NAND) Millenium initialization.
|
||||
* The NAND lives in the CS2* space
|
||||
*/
|
||||
#if defined(CONFIG_CMD_NAND)
|
||||
|
||||
#define MASK_ALE (1 << 22) /* our ALE is AD22 */
|
||||
#define MASK_CLE (1 << 21) /* our CLE is AD21 */
|
||||
|
||||
void cpux9k2_nand_hw_init(void)
|
||||
{
|
||||
unsigned long csr;
|
||||
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
|
||||
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
||||
at91_mc_t *mc = (at91_mc_t *) ATMEL_BASE_MC;
|
||||
|
||||
/* Setup Smart Media, fitst enable the address range of CS3 */
|
||||
writel(readl(&mc->ebi.csa) | AT91_EBI_CSA_CS3A, &mc->ebi.csa);
|
||||
|
||||
/* RWH = 1 | RWS = 0 | TDF = 1 | NWS = 3 */
|
||||
csr = AT91_SMC_CSR_RWHOLD(1) | AT91_SMC_CSR_TDF(1) |
|
||||
AT91_SMC_CSR_NWS(3) |
|
||||
AT91_SMC_CSR_ACSS_STANDARD | AT91_SMC_CSR_DBW_8 |
|
||||
AT91_SMC_CSR_WSEN;
|
||||
writel(csr, &mc->smc.csr[3]);
|
||||
|
||||
writel(ATMEL_PMX_CA_SMOE | ATMEL_PMX_CA_SMWE, &pio->pioc.asr);
|
||||
writel(ATMEL_PMX_CA_BFCK | ATMEL_PMX_CA_SMOE | ATMEL_PMX_CA_SMWE,
|
||||
&pio->pioc.pdr);
|
||||
|
||||
/* Configure PC2 as input (signal Nand READY ) */
|
||||
writel(ATMEL_PMX_CA_BFAVD, &pio->pioc.per);
|
||||
writel(ATMEL_PMX_CA_BFAVD, &pio->pioc.odr); /* disable output */
|
||||
writel(ATMEL_PMX_CA_BFCK, &pio->pioc.codr);
|
||||
|
||||
/* PIOC clock enabling */
|
||||
writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
|
||||
}
|
||||
|
||||
static void board_nand_hwcontrol(struct mtd_info *mtd,
|
||||
int cmd, unsigned int ctrl)
|
||||
{
|
||||
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
|
||||
struct nand_chip *this = mtd->priv;
|
||||
ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
|
||||
|
||||
if (ctrl & NAND_CTRL_CHANGE) {
|
||||
IO_ADDR_W &= ~(MASK_ALE | MASK_CLE);
|
||||
|
||||
if (ctrl & NAND_CLE)
|
||||
IO_ADDR_W |= MASK_CLE;
|
||||
if (ctrl & NAND_ALE)
|
||||
IO_ADDR_W |= MASK_ALE;
|
||||
|
||||
if ((ctrl & NAND_NCE))
|
||||
writel(1, &pio->pioc.codr);
|
||||
else
|
||||
writel(1, &pio->pioc.sodr);
|
||||
|
||||
this->IO_ADDR_W = (void *) IO_ADDR_W;
|
||||
}
|
||||
if (cmd != NAND_CMD_NONE)
|
||||
writeb(cmd, this->IO_ADDR_W);
|
||||
}
|
||||
|
||||
static int board_nand_dev_ready(struct mtd_info *mtd)
|
||||
{
|
||||
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
|
||||
return ((readl(&pio->pioc.pdsr) & (1 << 2)) != 0);
|
||||
}
|
||||
|
||||
int board_nand_init(struct nand_chip *nand)
|
||||
{
|
||||
cpux9k2_nand_hw_init();
|
||||
nand->ecc.mode = NAND_ECC_SOFT;
|
||||
nand->cmd_ctrl = board_nand_hwcontrol;
|
||||
nand->dev_ready = board_nand_dev_ready;
|
||||
nand->chip_delay = 20;
|
||||
return 0;
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_VIDEO)
|
||||
/*
|
||||
* drv_video_init
|
||||
* FUNCTION: initialize VCxK device
|
||||
*/
|
||||
|
||||
int drv_video_init(void)
|
||||
{
|
||||
#ifdef CONFIG_SPLASH_SCREEN
|
||||
unsigned long splash;
|
||||
#endif
|
||||
char *s;
|
||||
unsigned long csr;
|
||||
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
||||
at91_mc_t *mc = (at91_mc_t *) ATMEL_BASE_MC;
|
||||
|
||||
printf("Init Video as ");
|
||||
s = getenv("displaywidth");
|
||||
if (s != NULL)
|
||||
display_width = simple_strtoul(s, NULL, 10);
|
||||
else
|
||||
display_width = 256;
|
||||
s = getenv("displayheight");
|
||||
if (s != NULL)
|
||||
display_height = simple_strtoul(s, NULL, 10);
|
||||
else
|
||||
display_height = 256;
|
||||
printf("%ld x %ld pixel matrix\n", display_width, display_height);
|
||||
|
||||
/* RWH = 2 | RWS =2 | TDF = 4 | NWS = 0x6 */
|
||||
csr = AT91_SMC_CSR_RWHOLD(2) | AT91_SMC_CSR_RWSETUP(2) |
|
||||
AT91_SMC_CSR_TDF(4) | AT91_SMC_CSR_NWS(6) |
|
||||
AT91_SMC_CSR_ACSS_STANDARD | AT91_SMC_CSR_DBW_16 |
|
||||
AT91_SMC_CSR_BAT_16 | AT91_SMC_CSR_WSEN;
|
||||
writel(csr, &mc->smc.csr[2]);
|
||||
writel(1 << ATMEL_ID_PIOB, &pmc->pcer);
|
||||
|
||||
vcxk_init(display_width, display_height);
|
||||
#ifdef CONFIG_SPLASH_SCREEN
|
||||
s = getenv("splashimage");
|
||||
if (s != NULL) {
|
||||
splash = simple_strtoul(s, NULL, 16);
|
||||
printf("use splashimage: %lx\n", splash);
|
||||
video_display_bitmap(splash, 0, 0);
|
||||
}
|
||||
#endif
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SYS_I2C_SOFT
|
||||
|
||||
void i2c_init_board(void)
|
||||
{
|
||||
u32 pin;
|
||||
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
||||
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
|
||||
|
||||
writel(1 << ATMEL_ID_PIOA, &pmc->pcer);
|
||||
pin = ATMEL_PMX_AA_TWD | ATMEL_PMX_AA_TWCK;
|
||||
writel(pin, &pio->pioa.idr);
|
||||
writel(pin, &pio->pioa.pudr);
|
||||
writel(pin, &pio->pioa.per);
|
||||
writel(pin, &pio->pioa.oer);
|
||||
writel(pin, &pio->pioa.sodr);
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
/*--------------------------------------------------------------------------*/
|
||||
|
||||
#ifdef CONFIG_STATUS_LED
|
||||
|
||||
void __led_toggle(led_id_t mask)
|
||||
{
|
||||
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
|
||||
|
||||
if (readl(&pio->piod.odsr) & mask)
|
||||
writel(mask, &pio->piod.codr);
|
||||
else
|
||||
writel(mask, &pio->piod.codr);
|
||||
}
|
||||
|
||||
void __led_init(led_id_t mask, int state)
|
||||
{
|
||||
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
||||
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
|
||||
|
||||
writel(1 << ATMEL_ID_PIOD, &pmc->pcer); /* Enable PIOB clock */
|
||||
/* Disable peripherals on LEDs */
|
||||
writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.per);
|
||||
/* Enable pins as outputs */
|
||||
writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.oer);
|
||||
/* Turn all LEDs OFF */
|
||||
writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.sodr);
|
||||
|
||||
__led_set(mask, state);
|
||||
}
|
||||
|
||||
void __led_set(led_id_t mask, int state)
|
||||
{
|
||||
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
|
||||
if (state == STATUS_LED_ON)
|
||||
writel(mask, &pio->piod.codr);
|
||||
else
|
||||
writel(mask, &pio->piod.sodr);
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
||||
int do_brightness(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
||||
{
|
||||
int rcode = 0;
|
||||
ulong side;
|
||||
ulong bright;
|
||||
|
||||
switch (argc) {
|
||||
case 3:
|
||||
side = simple_strtoul(argv[1], NULL, 10);
|
||||
bright = simple_strtoul(argv[2], NULL, 10);
|
||||
if ((side >= 0) && (side <= 3) &&
|
||||
(bright >= 0) && (bright <= 1000)) {
|
||||
vcxk_setbrightness(side, bright);
|
||||
rcode = 0;
|
||||
} else {
|
||||
printf("parameters out of range\n");
|
||||
printf("Usage:\n%s\n", cmdtp->usage);
|
||||
rcode = 1;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
printf("Usage:\n%s\n", cmdtp->usage);
|
||||
rcode = 1;
|
||||
break;
|
||||
}
|
||||
return rcode;
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
||||
U_BOOT_CMD(
|
||||
bright, 3, 0, do_brightness,
|
||||
"bright - sets the display brightness\n",
|
||||
" <side> <0..1000>\n side: 0/3=both; 1=first; 2=second\n"
|
||||
);
|
||||
|
||||
/* EOF cpu9k2.c */
|
|
@ -1,5 +0,0 @@
|
|||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_TARGET_EB_CPUX9K2=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_SYS_PROMPT="U-Boot> "
|
|
@ -1,5 +0,0 @@
|
|||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_TARGET_EB_CPUX9K2=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT"
|
||||
# CONFIG_CMD_SETEXPR is not set
|
|
@ -1,400 +0,0 @@
|
|||
/*
|
||||
* (C) Copyright 2008-2009
|
||||
* BuS Elektronik GmbH & Co. KG <www.bus-elektronik.de>
|
||||
* Jens Scharsig <esw@bus-elektronik.de>
|
||||
*
|
||||
* Configuation settings for the EB+CPUx9K2 board.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef _CONFIG_EB_CPUx9K2_H_
|
||||
#define _CONFIG_EB_CPUx9K2_H_
|
||||
|
||||
/*--------------------------------------------------------------------------*/
|
||||
|
||||
#define CONFIG_AT91RM9200 /* It's an Atmel AT91RM9200 SoC */
|
||||
#define CONFIG_EB_CPUX9K2 /* on an EP+CPUX9K2 Board */
|
||||
#define USE_920T_MMU
|
||||
|
||||
#define CONFIG_VERSION_VARIABLE
|
||||
#define CONFIG_IDENT_STRING " on EB+CPUx9K2"
|
||||
|
||||
#include <asm/hardware.h> /* needed for port definitions */
|
||||
|
||||
#define CONFIG_MISC_INIT_R
|
||||
#define CONFIG_BOARD_EARLY_INIT_F
|
||||
|
||||
#define MACH_TYPE_EB_CPUX9K2 1977
|
||||
#define CONFIG_MACH_TYPE MACH_TYPE_EB_CPUX9K2
|
||||
|
||||
#define CONFIG_SYS_CACHELINE_SIZE 32
|
||||
#define CONFIG_SYS_DCACHE_OFF
|
||||
|
||||
/*--------------------------------------------------------------------------*/
|
||||
#ifndef CONFIG_RAMBOOT
|
||||
#define CONFIG_SYS_TEXT_BASE 0x00000000
|
||||
#else
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT
|
||||
#define CONFIG_SYS_TEXT_BASE 0x21800000
|
||||
#endif
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
|
||||
#define CONFIG_STANDALONE_LOAD_ADDR 0x21000000
|
||||
|
||||
#define CONFIG_BOOT_RETRY_TIME 30
|
||||
#define CONFIG_CMDLINE_EDITING
|
||||
|
||||
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
|
||||
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
|
||||
#define CONFIG_SYS_PBSIZE \
|
||||
(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
||||
|
||||
/*
|
||||
* ARM asynchronous clock
|
||||
*/
|
||||
|
||||
#define AT91C_MAIN_CLOCK 179404800 /* from 12.288 MHz * 73 / 5 */
|
||||
#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3)
|
||||
#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2)
|
||||
|
||||
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock */
|
||||
|
||||
#define CONFIG_CMDLINE_TAG 1
|
||||
#define CONFIG_SETUP_MEMORY_TAGS 1
|
||||
#define CONFIG_INITRD_TAG 1
|
||||
|
||||
#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
|
||||
/* flash */
|
||||
#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000
|
||||
#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
|
||||
|
||||
/* clocks */
|
||||
#define CONFIG_SYS_PLLAR_VAL 0x20483E05 /* 179.4048 MHz for PCK */
|
||||
#define CONFIG_SYS_PLLBR_VAL 0x104C3E0A /* 47.3088 MHz (for USB) */
|
||||
#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Clock */
|
||||
|
||||
/*
|
||||
* Size of malloc() pool
|
||||
*/
|
||||
|
||||
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
|
||||
|
||||
/*
|
||||
* sdram
|
||||
*/
|
||||
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE 0x20000000
|
||||
#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */
|
||||
#define CONFIG_SYS_INIT_SP_ADDR 0x00204000 /* use internal SRAM */
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
||||
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
|
||||
CONFIG_SYS_SDRAM_SIZE - 0x00400000 - \
|
||||
CONFIG_SYS_MALLOC_LEN)
|
||||
|
||||
#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* PIOC as D16/D31 */
|
||||
#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000
|
||||
#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000
|
||||
#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */
|
||||
#define CONFIG_SYS_SDRC_CR_VAL 0x2188c159 /* set up the SDRAM */
|
||||
#define CONFIG_SYS_SDRAM 0x20000000 /* address of the SDRAM */
|
||||
#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the SDRAM */
|
||||
#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to SDRAM */
|
||||
#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
|
||||
#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */
|
||||
#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
|
||||
#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */
|
||||
#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
|
||||
|
||||
/*
|
||||
* Command line configuration
|
||||
*/
|
||||
#define CONFIG_CMD_BMP
|
||||
#define CONFIG_CMD_DATE
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_I2C
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_CMD_NAND
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_I2C_CMD_TREE
|
||||
#define CONFIG_CMD_USB
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_CMD_UBI
|
||||
#define CONFIG_CMD_MTDPARTS
|
||||
#define CONFIG_CMD_UBIFS
|
||||
|
||||
#define CONFIG_SYS_LONGHELP
|
||||
|
||||
/*
|
||||
* MTD defines
|
||||
*/
|
||||
|
||||
#define CONFIG_FLASH_CFI_MTD
|
||||
#define CONFIG_MTD_DEVICE
|
||||
#define CONFIG_MTD_PARTITIONS
|
||||
#define CONFIG_RBTREE
|
||||
#define CONFIG_LZO
|
||||
|
||||
#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=atmel_nand"
|
||||
#define MTDPARTS_DEFAULT "mtdparts=" \
|
||||
"physmap-flash.0:" \
|
||||
"512k(U-Boot)," \
|
||||
"128k(Env)," \
|
||||
"128k(Splash)," \
|
||||
"4M(Kernel)," \
|
||||
"384k(MiniFS)," \
|
||||
"-(FS)" \
|
||||
";" \
|
||||
"atmel_nand:" \
|
||||
"1M(emergency)," \
|
||||
"-(data)"
|
||||
/*
|
||||
* Hardware drivers
|
||||
*/
|
||||
#define CONFIG_USB_ATMEL
|
||||
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
|
||||
#define CONFIG_USB_OHCI_NEW
|
||||
#define CONFIG_AT91C_PQFP_UHPBUG
|
||||
#define CONFIG_USB_STORAGE
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#define CONFIG_ISO_PARTITION
|
||||
#define CONFIG_EFI_PARTITION
|
||||
|
||||
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
|
||||
#define CONFIG_SYS_USB_OHCI_CPU_INIT
|
||||
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000
|
||||
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"
|
||||
|
||||
/*
|
||||
* UART/CONSOLE
|
||||
*/
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#define CONFIG_ATMEL_USART
|
||||
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
|
||||
#define CONFIG_USART_ID 0/* ignored in arm */
|
||||
|
||||
/*
|
||||
* network
|
||||
*/
|
||||
|
||||
#define CONFIG_NET_RETRY_COUNT 10
|
||||
#define CONFIG_RESET_PHY_R 1
|
||||
|
||||
#define CONFIG_DRIVER_AT91EMAC 1
|
||||
#define CONFIG_DRIVER_AT91EMAC_QUIET 1
|
||||
#define CONFIG_SYS_RX_ETH_BUFFER 8
|
||||
#define CONFIG_MII 1
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
/*
|
||||
* I2C-Bus
|
||||
*/
|
||||
|
||||
#define CONFIG_SYS_I2C
|
||||
#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
|
||||
#define CONFIG_SYS_I2C_SOFT_SPEED 50000
|
||||
#define CONFIG_SYS_I2C_SOFT_SLAVE 0
|
||||
|
||||
/* Software I2C driver configuration */
|
||||
|
||||
#define AT91_PIN_SDA (1<<25) /* AT91C_PIO_PA25 */
|
||||
#define AT91_PIN_SCL (1<<26) /* AT91C_PIO_PA26 */
|
||||
|
||||
#define CONFIG_SYS_I2C_INIT_BOARD
|
||||
|
||||
#define I2C_INIT i2c_init_board();
|
||||
#define I2C_ACTIVE writel(ATMEL_PMX_AA_TWD, &pio->pioa.mddr);
|
||||
#define I2C_TRISTATE writel(ATMEL_PMX_AA_TWD, &pio->pioa.mder);
|
||||
#define I2C_READ ((readl(&pio->pioa.pdsr) & ATMEL_PMX_AA_TWD) != 0)
|
||||
#define I2C_SDA(bit) \
|
||||
if (bit) \
|
||||
writel(ATMEL_PMX_AA_TWD, &pio->pioa.sodr); \
|
||||
else \
|
||||
writel(ATMEL_PMX_AA_TWD, &pio->pioa.codr);
|
||||
#define I2C_SCL(bit) \
|
||||
if (bit) \
|
||||
writel(ATMEL_PMX_AA_TWCK, &pio->pioa.sodr); \
|
||||
else \
|
||||
writel(ATMEL_PMX_AA_TWCK, &pio->pioa.codr);
|
||||
|
||||
#define I2C_DELAY udelay(2500000/CONFIG_SYS_I2C_SOFT_SPEED)
|
||||
|
||||
/* I2C-RTC */
|
||||
|
||||
#ifdef CONFIG_CMD_DATE
|
||||
#define CONFIG_RTC_DS1338
|
||||
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
||||
#endif
|
||||
|
||||
/* EEPROM */
|
||||
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
|
||||
|
||||
/* FLASH organization */
|
||||
|
||||
/* NOR-FLASH */
|
||||
#define CONFIG_FLASH_SHOW_PROGRESS 45
|
||||
|
||||
#define CONFIG_FLASH_CFI_DRIVER 1
|
||||
|
||||
#define PHYS_FLASH_1 0x10000000
|
||||
#define PHYS_FLASH_SIZE 0x01000000 /* 16 megs main flash */
|
||||
#define CONFIG_SYS_FLASH_CFI 1
|
||||
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
|
||||
|
||||
#define CONFIG_SYS_FLASH_PROTECTION 1
|
||||
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 512
|
||||
#define CONFIG_SYS_FLASH_ERASE_TOUT 6000
|
||||
#define CONFIG_SYS_FLASH_WRITE_TOUT 2000
|
||||
|
||||
/* NAND */
|
||||
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
#define CONFIG_SYS_NAND_BASE 0x40000000
|
||||
#define CONFIG_SYS_NAND_DBW_8 1
|
||||
|
||||
/* Status LED's */
|
||||
|
||||
#define CONFIG_STATUS_LED 1
|
||||
#define CONFIG_BOARD_SPECIFIC_LED 1
|
||||
|
||||
#define STATUS_LED_BOOT 1
|
||||
#define STATUS_LED_ACTIVE 0
|
||||
|
||||
#define STATUS_LED_BIT 1 /* AT91C_PIO_PD0 green LED */
|
||||
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
|
||||
#define STATUS_LED_STATE STATUS_LED_OFF /* BLINKING */
|
||||
#define STATUS_LED_BIT1 2 /* AT91C_PIO_PD1 red LED */
|
||||
#define STATUS_LED_STATE1 STATUS_LED_ON /* BLINKING */
|
||||
#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 4)
|
||||
|
||||
#define CONFIG_VIDEO 1
|
||||
|
||||
/* Options */
|
||||
|
||||
#ifdef CONFIG_VIDEO
|
||||
|
||||
#define CONFIG_VIDEO_VCXK 1
|
||||
|
||||
#define CONFIG_SPLASH_SCREEN 1
|
||||
|
||||
#define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN 4
|
||||
#define CONFIG_SYS_VCXK_BASE 0x30000000
|
||||
|
||||
#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN (1<<3)
|
||||
#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT piob
|
||||
#define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR odr
|
||||
|
||||
#define CONFIG_SYS_VCXK_ENABLE_PIN (1<<5)
|
||||
#define CONFIG_SYS_VCXK_ENABLE_PORT piob
|
||||
#define CONFIG_SYS_VCXK_ENABLE_DDR oer
|
||||
|
||||
#define CONFIG_SYS_VCXK_REQUEST_PIN (1<<2)
|
||||
#define CONFIG_SYS_VCXK_REQUEST_PORT piob
|
||||
#define CONFIG_SYS_VCXK_REQUEST_DDR oer
|
||||
|
||||
#define CONFIG_SYS_VCXK_INVERT_PIN (1<<4)
|
||||
#define CONFIG_SYS_VCXK_INVERT_PORT piob
|
||||
#define CONFIG_SYS_VCXK_INVERT_DDR oer
|
||||
|
||||
#define CONFIG_SYS_VCXK_RESET_PIN (1<<6)
|
||||
#define CONFIG_SYS_VCXK_RESET_PORT piob
|
||||
#define CONFIG_SYS_VCXK_RESET_DDR oer
|
||||
|
||||
#endif /* CONFIG_VIDEO */
|
||||
|
||||
/* Environment */
|
||||
|
||||
#define CONFIG_BOOTDELAY 5
|
||||
|
||||
#define CONFIG_ENV_IS_IN_FLASH 1
|
||||
#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x80000)
|
||||
#define CONFIG_ENV_SIZE 0x20000 /* sectors are 128K here */
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#define CONFIG_BOOTCOMMAND "run nfsboot"
|
||||
|
||||
#define CONFIG_NFSBOOTCOMMAND \
|
||||
"dhcp $(copy_addr) uImage_cpux9k2;" \
|
||||
"run bootargsdefaults;" \
|
||||
"set bootargs $(bootargs) boot=nfs " \
|
||||
";echo $(bootargs)" \
|
||||
";bootm"
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"displaywidth=256\0" \
|
||||
"displayheight=512\0" \
|
||||
"displaybsteps=1023\0" \
|
||||
"ubootaddr=10000000\0" \
|
||||
"splashimage=100A0000\0" \
|
||||
"kerneladdr=100C0000\0" \
|
||||
"kernelsize=00400000\0" \
|
||||
"rootfsaddr=10520000\0" \
|
||||
"copy_addr=21200000\0" \
|
||||
"rootfssize=00AE0000\0" \
|
||||
"mtdids=" MTDIDS_DEFAULT "\0" \
|
||||
"mtdparts=" MTDPARTS_DEFAULT "\0" \
|
||||
"bootargsdefaults=set bootargs " \
|
||||
"console=ttyS0,115200 " \
|
||||
"video=vcxk_fb:xres:${displaywidth}," \
|
||||
"yres:${displayheight}," \
|
||||
"bres:${displaybsteps} " \
|
||||
"mem=62M " \
|
||||
"panic=10 " \
|
||||
"uboot=\\\"${ver}\\\" " \
|
||||
"\0" \
|
||||
"update_kernel=protect off $(kerneladdr) +$(kernelsize);" \
|
||||
"dhcp $(copy_addr) uImage_cpux9k2;" \
|
||||
"erase $(kerneladdr) +$(kernelsize);" \
|
||||
"cp.b $(fileaddr) $(kerneladdr) $(filesize);" \
|
||||
"protect on $(kerneladdr) +$(kernelsize)" \
|
||||
"\0" \
|
||||
"update_root=protect off $(rootfsaddr) +$(rootfssize);" \
|
||||
"dhcp $(copy_addr) rfs;" \
|
||||
"erase $(rootfsaddr) +$(rootfssize);" \
|
||||
"cp.b $(fileaddr) $(rootfsaddr) $(filesize);" \
|
||||
"\0" \
|
||||
"update_uboot=protect off 10000000 1007FFFF;" \
|
||||
"dhcp $(copy_addr) u-boot_eb_cpux9k2;" \
|
||||
"erase 10000000 1007FFFF;" \
|
||||
"cp.b $(fileaddr) $(ubootaddr) $(filesize);" \
|
||||
"protect on 10000000 1007FFFF;reset\0" \
|
||||
"update_splash=protect off $(splashimage) +20000;" \
|
||||
"dhcp $(copy_addr) splash_eb_cpux9k2.bmp;" \
|
||||
"erase $(splashimage) +20000;" \
|
||||
"cp.b $(fileaddr) $(splashimage) $(filesize);" \
|
||||
"protect on $(splashimage) +20000;reset\0" \
|
||||
"emergency=run bootargsdefaults;" \
|
||||
"set bootargs $(bootargs) root=initramfs boot=emergency " \
|
||||
";bootm $(kerneladdr)\0" \
|
||||
"netemergency=run bootargsdefaults;" \
|
||||
"dhcp $(copy_addr) uImage_cpux9k2;" \
|
||||
"set bootargs $(bootargs) root=initramfs boot=emergency " \
|
||||
";bootm $(copy_addr)\0" \
|
||||
"norboot=run bootargsdefaults;" \
|
||||
"set bootargs $(bootargs) root=initramfs boot=local " \
|
||||
";bootm $(kerneladdr)\0" \
|
||||
"nandboot=run bootargsdefaults;" \
|
||||
"set bootargs $(bootargs) root=initramfs boot=nand " \
|
||||
";bootm $(kerneladdr)\0" \
|
||||
" "
|
||||
|
||||
/*--------------------------------------------------------------------------*/
|
||||
|
||||
#endif
|
||||
|
||||
/* EOF */
|
Loading…
Reference in a new issue