Merge with /home/wd/git/u-boot/master
This commit is contained in:
commit
592391a6e5
577
CHANGELOG
577
CHANGELOG
|
@ -1,3 +1,91 @@
|
|||
commit 2d78074d2e806edc380c1464eb9e5df335ece65e
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Fri Jun 22 17:32:28 2007 +0200
|
||||
|
||||
ppc7xx: Update CPCI750 board
|
||||
|
||||
This small CPCI750 update extends the board specific command
|
||||
"show_config" to display the Marvell strapping registers and
|
||||
extends the PCI IDE controller.
|
||||
|
||||
Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
|
||||
Author: Jon Loeliger <jdl@freescale.com>
|
||||
Date: Wed Aug 15 11:55:35 2007 -0500
|
||||
|
||||
86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
|
||||
|
||||
Remove a leftover in net/tftp.c while we're at it.
|
||||
|
||||
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
||||
|
||||
commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
|
||||
Author: Jon Loeliger <jdl@freescale.com>
|
||||
Date: Wed Aug 15 12:20:40 2007 -0500
|
||||
|
||||
Move the MPC8641HPCN board under board/freescale.
|
||||
|
||||
Minor path corrections needed to ensure buildability.
|
||||
|
||||
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
||||
|
||||
commit 8662577fe36fdb6a44b55b998d9daac6392a736a
|
||||
Author: Jon Loeliger <jdl@freescale.com>
|
||||
Date: Wed Aug 15 11:46:22 2007 -0500
|
||||
|
||||
86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
|
||||
|
||||
Remove a leftover in net/tftp.c while we're at it.
|
||||
|
||||
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
||||
|
||||
commit 210f463c71917b7a4495c2103c228b9c179ae64d
|
||||
Author: Jerry Van Baren <gvb.uboot@gmail.com>
|
||||
Date: Wed Aug 15 11:13:15 2007 -0400
|
||||
|
||||
Fix where the #ifdef CFG_BOOTMAPSZ is placed.
|
||||
|
||||
Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
|
||||
interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
|
||||
when it should have gone inside of the conditional. As a result, it
|
||||
broke non-LIBFDT board builds.
|
||||
|
||||
Also added a missing "not." to the comment.
|
||||
|
||||
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
|
||||
|
||||
commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
|
||||
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
|
||||
Date: Tue Aug 14 14:06:45 2007 -0500
|
||||
|
||||
Fix malloc size error in ahci_init_one.
|
||||
|
||||
Typically this causes scsi init to corrupt the
|
||||
devlist and break the coninfo command.
|
||||
Fix a compiler size warning.
|
||||
|
||||
Signed-off-by: Jason Jin <jason.jin@freescale.com>
|
||||
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
||||
Acked-by: Andy Fleming <afleming@freescale.com>
|
||||
|
||||
commit b361acd64fd2525c081b9b288b0804efe209c0e9
|
||||
Author: ksi@koi8.net <ksi@koi8.net>
|
||||
Date: Tue Aug 14 10:02:16 2007 -0700
|
||||
|
||||
TI DaVinci - fix unsupported %hhx format
|
||||
|
||||
Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
|
||||
|
||||
commit f01dbb5424a81453c81190dd30e945891466f621
|
||||
Author: Wolfgang Denk <wd@denx.de>
|
||||
Date: Tue Aug 14 18:42:36 2007 +0200
|
||||
|
||||
Coding style cleanup. Update CHANGELOG.
|
||||
|
||||
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
||||
|
||||
commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
|
||||
Author: Andy Fleming <afleming@freescale.com>
|
||||
Date: Tue Aug 14 10:32:59 2007 -0500
|
||||
|
@ -20,6 +108,50 @@ Date: Tue Aug 14 15:40:00 2007 +0100
|
|||
|
||||
Supply spi interface in at45.c
|
||||
|
||||
commit 4ce846ec59f36b85d6644a769690ad3feb667575
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Tue Aug 14 15:12:01 2007 +0200
|
||||
|
||||
POST: Fix merge problem
|
||||
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Tue Aug 14 15:03:17 2007 +0200
|
||||
|
||||
Coding style cleanup
|
||||
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit 779e975117a75e91fcebe226a63104dbfb924ab1
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Tue Aug 14 14:44:41 2007 +0200
|
||||
|
||||
ppc4xx: Add initial Zeus (PPC405EP) board support
|
||||
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit c5a172a5fd636c12467429e3f7910e53773979c6
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Tue Aug 14 14:41:55 2007 +0200
|
||||
|
||||
POST: Add option for external ethernet loopback test
|
||||
|
||||
When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
|
||||
is not done using an internal loopback connection, but by assuming
|
||||
that an external loopback connector is plugged into the board.
|
||||
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit eb2b4010ae426245172988804ee8d9193fb41038
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Tue Aug 14 14:39:44 2007 +0200
|
||||
|
||||
POST: Add ppc405 support to cache and UART POST
|
||||
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
|
||||
Author: Peter Pearse <peter.pearse@arm.com>
|
||||
Date: Tue Aug 14 10:46:32 2007 +0100
|
||||
|
@ -391,6 +523,17 @@ Date: Wed Jun 27 13:34:26 2007 +0200
|
|||
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
||||
Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
|
||||
|
||||
commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Mon Aug 13 09:05:33 2007 +0200
|
||||
|
||||
ppc4xx: Fix problem in PLL clock calculation
|
||||
|
||||
This patch was originall provided by David Mitchell <dmitchell@amcc.com>
|
||||
and fixes a bug in the PLL clock calculation.
|
||||
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
|
||||
Author: Wolfgang Denk <wd@denx.de>
|
||||
Date: Sun Aug 12 21:34:50 2007 +0200
|
||||
|
@ -849,6 +992,14 @@ Date: Thu Aug 2 14:42:20 2007 -0500
|
|||
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
||||
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
||||
|
||||
commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Fri Aug 10 10:42:25 2007 +0200
|
||||
|
||||
Coding style cleanup
|
||||
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
|
||||
Author: Dirk Behme <dirk.behme@googlemail.com>
|
||||
Date: Thu Aug 2 17:42:08 2007 +0200
|
||||
|
@ -873,6 +1024,105 @@ Date: Thu Aug 2 17:41:14 2007 +0200
|
|||
|
||||
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
|
||||
|
||||
commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
|
||||
Author: Niklaus Giger <niklausgiger@gmx.ch>
|
||||
Date: Fri Jul 27 11:31:22 2007 +0200
|
||||
|
||||
Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
|
||||
|
||||
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
|
||||
|
||||
commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
|
||||
Author: Niklaus Giger <niklausgiger@gmx.ch>
|
||||
Date: Fri Jul 27 11:30:33 2007 +0200
|
||||
|
||||
Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
|
||||
|
||||
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
|
||||
|
||||
commit e8397fc78c9394d71de233a4d810fbc9047e4c76
|
||||
Author: Niklaus Giger <niklausgiger@gmx.ch>
|
||||
Date: Fri Jul 27 11:38:26 2007 +0200
|
||||
|
||||
Add PPC4xx-HCU4 and HCU5 boards: common files
|
||||
|
||||
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
|
||||
|
||||
commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
|
||||
Author: Niklaus Giger <niklausgiger@gmx.ch>
|
||||
Date: Fri Jul 27 11:28:44 2007 +0200
|
||||
|
||||
Add PPC4xx-HCU4 and HCU5 boards: make related
|
||||
|
||||
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
|
||||
|
||||
commit 137fdd9f474ecb853efdace5200576308c67f18d
|
||||
Author: Niklaus Giger <niklausgiger@gmx.ch>
|
||||
Date: Fri Jul 27 11:28:03 2007 +0200
|
||||
|
||||
Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
|
||||
|
||||
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
|
||||
|
||||
commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
|
||||
Author: Niklaus Giger <niklausgiger@gmx.ch>
|
||||
Date: Fri Jul 27 11:27:15 2007 +0200
|
||||
|
||||
Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
|
||||
|
||||
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
|
||||
|
||||
commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
|
||||
Author: Niklaus Giger <niklausgiger@gmx.ch>
|
||||
Date: Fri Jul 27 11:25:31 2007 +0200
|
||||
|
||||
Add PPC4xx-HCU4 and HCU5 boards: READMEs
|
||||
|
||||
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
|
||||
|
||||
commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
|
||||
Author: Niklaus Giger <niklausgiger@gmx.ch>
|
||||
Date: Fri Jul 27 11:37:40 2007 +0200
|
||||
|
||||
Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
|
||||
|
||||
This series of patches adds support for 2 boards from Netstal Maschinen.
|
||||
|
||||
The HCU4 has a PPC405Gpr and
|
||||
the HCU5 has a PPC440EPX.
|
||||
|
||||
The HCU4 has a somehow complicated flash setup, as the booteprom is
|
||||
only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
|
||||
elegant solution.
|
||||
|
||||
The HCU5 has only a booteprom as the whole code will be downloaded from a
|
||||
different board which has HD, CD-ROM, etc and where all code is stored.
|
||||
|
||||
This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
|
||||
Thanks them a lot.
|
||||
|
||||
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
|
||||
|
||||
commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Fri Aug 10 08:42:55 2007 +0200
|
||||
|
||||
ppc4xx: Update lwmon5 POST configuration
|
||||
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
|
||||
Author: Yuri Tikhonov <yur@emcraft.com>
|
||||
Date: Fri Aug 10 08:25:22 2007 +0200
|
||||
|
||||
POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
|
||||
|
||||
The patch adds support for UART POST on ppc44x-based boards with no
|
||||
external serial clocks installed.
|
||||
|
||||
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
|
||||
Acked-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
|
||||
Author: Kim Phillips <kim.phillips@freescale.com>
|
||||
Date: Mon Aug 6 18:18:34 2007 -0500
|
||||
|
@ -1169,6 +1419,17 @@ Date: Mon Aug 6 23:21:05 2007 +0200
|
|||
|
||||
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
||||
|
||||
commit 537223afa61f64480df31ce440a9cb386df4a814
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Mon Aug 6 21:10:17 2007 +0200
|
||||
|
||||
ppc4xx: Update AMCC Bamboo README doc/README.bamboo
|
||||
|
||||
As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>,
|
||||
here an updated Bamboo README.
|
||||
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
|
||||
Author: Wolfgang Denk <wd@denx.de>
|
||||
Date: Mon Aug 6 02:17:36 2007 +0200
|
||||
|
@ -1316,6 +1577,42 @@ Date: Thu Aug 2 10:11:18 2007 +0200
|
|||
|
||||
Minor cleanup of <board>_nand build rules.
|
||||
|
||||
commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Thu Aug 2 08:33:56 2007 +0200
|
||||
|
||||
ppc4xx: Code cleanup
|
||||
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit c92409812206ac67a7fa7aae298539a9c3804a46
|
||||
Author: Grzegorz Bernacki <gjb@semihalf.com>
|
||||
Date: Tue Jul 31 18:51:48 2007 +0200
|
||||
|
||||
[ppc440SPe] Graceful recovery from machine check during PCIe configuration
|
||||
|
||||
During config transactions on the PCIe bus an attempt to scan for a
|
||||
non-existent device can lead to a machine check exception with certain
|
||||
peripheral devices. In order to avoid crashing in such scenarios the
|
||||
instrumented versions of the config cycle read routines are introduced, so
|
||||
the exceptions fixups framework can gracefully recover.
|
||||
|
||||
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
|
||||
Acked-by: Rafal Jaworowski <raj@semihalf.com>
|
||||
|
||||
commit dec99558b9ea75a37940d07f41a3565a50b54ad1
|
||||
Author: Rafal Jaworowski <raj@semihalf.com>
|
||||
Date: Tue Jul 31 18:19:54 2007 +0200
|
||||
|
||||
[ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
|
||||
|
||||
This brings back separate settings for PCIe bus numbers depending on chip
|
||||
revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
|
||||
commit. 440SPe rev. A does NOT work properly with the same settings as for
|
||||
the rev. B (no devices are seen on the bus during enumeration).
|
||||
|
||||
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
|
||||
|
||||
commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
|
||||
Author: Wolfgang Denk <wd@denx.de>
|
||||
Date: Thu Aug 2 00:48:45 2007 +0200
|
||||
|
@ -1324,6 +1621,55 @@ Date: Thu Aug 2 00:48:45 2007 +0200
|
|||
|
||||
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
||||
|
||||
commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
|
||||
Author: Eugene OBrien <eugene.obrien@advantechamt.com>
|
||||
Date: Tue Jul 31 10:24:56 2007 +0200
|
||||
|
||||
ppc4xx: Update AMCC Bamboo 440EP support
|
||||
|
||||
Changed storage type of cfg_simulate_spd_eeprom to const
|
||||
Changed storage type of gpio_tab to stack storage
|
||||
(Cannot access global data declarations in .bss until afer code relocation)
|
||||
|
||||
Improved SDRAM tests to catch problems where data is not uniquely addressable
|
||||
(e.g. incorrectly programmed SDRAM row or columns)
|
||||
|
||||
Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
|
||||
Fixed AM29LV320DT (OpCode Flash) sector map
|
||||
|
||||
Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com>
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Tue Jul 31 08:37:01 2007 +0200
|
||||
|
||||
ppc4xx: Update 440EPx lwmon5 board support
|
||||
|
||||
- Clear ECC status regs after ECC POST test
|
||||
- Set dcbz for ECC generation with caches enabled as default
|
||||
- Code cleanup
|
||||
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Mon Jul 30 11:04:57 2007 +0200
|
||||
|
||||
ppc4xx: Only print ECC related info when the error bis are set
|
||||
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit e36220a4baf1f188ba60f17e9d0f043069b1362a
|
||||
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
||||
Date: Fri Jul 27 16:44:31 2007 +0200
|
||||
|
||||
new FPGA image for PLU405 board
|
||||
|
||||
new FPGA image for PLU405 board with improved CompactFlash timing
|
||||
|
||||
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
||||
|
||||
commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
|
||||
Author: Rafal Jaworowski <raj@semihalf.com>
|
||||
Date: Fri Jul 27 14:43:59 2007 +0200
|
||||
|
@ -1351,6 +1697,73 @@ Date: Fri Jul 27 14:22:04 2007 +0200
|
|||
|
||||
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
|
||||
|
||||
commit d4024bb72dd81695ec099b2199eda0d27c623e62
|
||||
Author: John Otken <john@softadvances.com>
|
||||
Date: Thu Jul 26 17:49:11 2007 +0200
|
||||
|
||||
ppc4xx: Add support for AMCC 405EP Taihu board
|
||||
|
||||
Signed-off-by: John Otken <john@softadvances.com>
|
||||
|
||||
commit b66091de6c7390620312c2501db23d8391e7cabb
|
||||
Author: Anatolij Gustschin <agust@denx.de>
|
||||
Date: Thu Jul 26 15:08:01 2007 +0200
|
||||
|
||||
ppc4xx: lwmon5: Update Lime initialization
|
||||
|
||||
Change Lime SDRAM initialization to now support 100MHz and
|
||||
133MHz (if enabled). Also the framebuffer is initialized to
|
||||
display a blue rectangle with a white border.
|
||||
|
||||
Signed-off-by: Anatolij Gustschin <agust@denx.de>
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit 9f24a808f17fc0f37b7fb4805f734741335caecc
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Tue Jul 24 09:52:52 2007 +0200
|
||||
|
||||
ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
|
||||
|
||||
The used Intel NOR FLASH chips have internally two dies, and are now
|
||||
treated as two seperate chips.
|
||||
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit aedf5bde179ecfbd0a96130d18996a96518b785f
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Tue Jul 24 07:20:09 2007 +0200
|
||||
|
||||
ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
|
||||
|
||||
As suggested by Hakan Eryigit, here an updated setup for the lwmon5
|
||||
interrupt controller.
|
||||
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit a71d96eac8130b53a91f93cd10c70fca0db18d52
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Fri Jul 20 15:03:44 2007 +0200
|
||||
|
||||
ppc4xx: Fix bug with default GPIO output value
|
||||
|
||||
As spotted by Matthias Fuchs, the default output values for all GPIO1
|
||||
outputs were not setup correctly. This patch fixes this issue.
|
||||
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit 531e3e8b831f357056448fa573137d5fb37000fd
|
||||
Author: Pavel Kolesnikov <concord@emcraft.com>
|
||||
Date: Fri Jul 20 15:03:03 2007 +0200
|
||||
|
||||
POST: Add ECC POST for the lwmon5 board
|
||||
|
||||
This patch adds ECC Post test for the Lwmon5 board based
|
||||
on PPC440EPx to U-Boot.
|
||||
|
||||
Signed-off-by: Pavel Kolesnikov <concord@emcraft.com>
|
||||
Acked-by: Yuri Tikhonov <yur@emcraft.com>
|
||||
Acked-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit cc3023b9f95d7ac959a764471a65001062aecf41
|
||||
Author: Rafal Jaworowski <raj@semihalf.com>
|
||||
Date: Thu Jul 19 17:12:28 2007 +0200
|
||||
|
@ -1362,6 +1775,58 @@ Date: Thu Jul 19 17:12:28 2007 +0200
|
|||
|
||||
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
|
||||
|
||||
commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Mon Jul 16 10:02:12 2007 +0200
|
||||
|
||||
ppc4xx: Code cleanup
|
||||
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Mon Jul 16 10:01:38 2007 +0200
|
||||
|
||||
ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
|
||||
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Mon Jul 16 10:00:43 2007 +0200
|
||||
|
||||
ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
|
||||
|
||||
The new boardspecific DDR2 controller configuration is used for the Yucca
|
||||
board. Now the Yucca board with 440SPe Rev. A chips is also supported.
|
||||
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Mon Jul 16 09:57:00 2007 +0200
|
||||
|
||||
ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
|
||||
|
||||
The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
|
||||
support non default, boardspecific DDR(2) controller configuration.
|
||||
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit 5743a9207a370b90f09b20ebd61167c806b937f3
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Mon Jul 16 08:53:51 2007 +0200
|
||||
|
||||
ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
|
||||
|
||||
The new function remove_tlb() can be used to remove the TLB's used to
|
||||
map a specific memory region. This is especially useful for the DDR(2)
|
||||
setup routines which configure the SDRAM area temporarily as a cached
|
||||
area (for speedup on auto-calibration and ECC generation) and later
|
||||
need this area uncached for normal usage.
|
||||
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit 3a6cab844cf74f76639d795e0be8717e02c86af7
|
||||
Author: Wolfgang Denk <wd@denx.de>
|
||||
Date: Sat Jul 14 22:51:02 2007 +0200
|
||||
|
@ -1393,6 +1858,17 @@ Date: Fri Jul 13 08:26:05 2007 +0200
|
|||
|
||||
Signed-off-by: Heiko Schocher <hs@denx.de>
|
||||
|
||||
commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Thu Jul 12 16:32:08 2007 +0200
|
||||
|
||||
ppc4xx: Change receive buffer handling in the 4xx emac driver
|
||||
|
||||
This change fixes a bug in the receive buffer handling, that
|
||||
could lead to problems upon high network traffic (broadcasts...).
|
||||
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
|
||||
Author: Wolfgang Denk <wd@denx.de>
|
||||
Date: Thu Jul 12 01:45:34 2007 +0200
|
||||
|
@ -1975,6 +2451,50 @@ Date: Tue Jul 10 00:01:28 2007 +0200
|
|||
|
||||
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
||||
|
||||
commit c8603cfbd4573379a6076c9c208545ba2bbf019a
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Mon Jul 9 11:00:24 2007 +0200
|
||||
|
||||
Small coding style cleanup
|
||||
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
|
||||
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
||||
Date: Mon Jul 9 10:10:08 2007 +0200
|
||||
|
||||
Migrate esd 405EP boards to new NAND subsystem
|
||||
|
||||
Remove unused CFG_NAND_LEGACY define
|
||||
|
||||
These boards to not have NAND.
|
||||
|
||||
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
||||
|
||||
commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
|
||||
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
||||
Date: Mon Jul 9 10:10:06 2007 +0200
|
||||
|
||||
Migrate esd 405EP boards to new NAND subsystem
|
||||
|
||||
Migrate esd 405EP boards to new NAND subsystem
|
||||
|
||||
-cleanup
|
||||
-use correct io accessors (in/out_be32())
|
||||
|
||||
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
||||
|
||||
commit e09f7ab5749c345f924da272bea0521a73af5b11
|
||||
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
||||
Date: Mon Jul 9 10:10:04 2007 +0200
|
||||
|
||||
Migrate esd 405EP boards to new NAND subsystem
|
||||
|
||||
This patch prepares the migration from the legacy NAND driver
|
||||
to U-Boot's new NAND subsystem for esd boards.
|
||||
|
||||
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
||||
|
||||
commit c3517f919d0f61650cf3027fd4faf0f631142f6c
|
||||
Author: Jon Loeliger <jdl@freescale.com>
|
||||
Date: Sun Jul 8 18:10:08 2007 -0500
|
||||
|
@ -2162,6 +2682,41 @@ Date: Thu Jul 5 19:13:52 2007 -0500
|
|||
|
||||
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
||||
|
||||
commit 10e038932f22ee80ebd53de312531e70e6590a2f
|
||||
Author: Thomas Knobloch <knobloch@siemens.com>
|
||||
Date: Fri Jul 6 14:58:39 2007 +0200
|
||||
|
||||
[NAND] Bad block skipping for command nboot
|
||||
|
||||
The old implementation of command nboot does not support reading the image from
|
||||
NAND flash with skipping of bad blocks. The patch implements a new version of
|
||||
the nboot command: by calling nboot.jffs2 from the u-boot command line the
|
||||
command will load the image from NAND flash with respect to bad blocks (by using
|
||||
nand_read_opts()). This is similar to e.g. the NAND read command: "nand
|
||||
read.jffs2 ...".
|
||||
|
||||
Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Fri Jul 6 12:26:51 2007 +0200
|
||||
|
||||
ppc4xx: Update lwmon5 default environment
|
||||
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit 5d187430a055d62f17ca84d75e7245439d1f7e75
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Fri Jul 6 11:48:24 2007 +0200
|
||||
|
||||
ppc4xx: Update lwmon5 board
|
||||
|
||||
Add unlock=yes environment variable to default variables to unlock
|
||||
the CFI flash by default.
|
||||
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Fri Jul 6 09:45:47 2007 +0200
|
||||
|
@ -3151,6 +3706,18 @@ Date: Fri Jun 22 14:58:04 2007 +0200
|
|||
- adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
|
||||
- minor 4xx cleanup
|
||||
|
||||
commit d677b32855f577ae2690dcd64a172cdd706e0ffc
|
||||
Author: Mike Frysinger <vapier@gentoo.org>
|
||||
Date: Fri Jun 22 10:34:12 2007 +0200
|
||||
|
||||
[patch] add nand_init() prototype to nand.h
|
||||
|
||||
since nand_init() is expected to be called by other parts of u-boot, there
|
||||
should be a prototype for it in nand.h
|
||||
|
||||
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
|
||||
Author: Wolfgang Denk <wd@denx.de>
|
||||
Date: Wed Jun 20 18:14:24 2007 +0200
|
||||
|
@ -3767,6 +4334,16 @@ Date: Sun May 27 16:51:48 2007 +0200
|
|||
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
|
||||
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
|
||||
|
||||
commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
|
||||
Author: Ulf Samuelsson <ulf@atmel.com>
|
||||
Date: Thu May 24 12:12:47 2007 +0200
|
||||
|
||||
[PATCH][NAND] Define the Vendor Id for Micron NAND Flash
|
||||
|
||||
Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
|
||||
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
|
||||
Signed-off-by: Stefan Roese <sr@denx.de>
|
||||
|
||||
commit d756894722c888d09a9fa1df8323753772d3dcce
|
||||
Author: Stefan Roese <sr@denx.de>
|
||||
Date: Thu May 24 09:49:00 2007 +0200
|
||||
|
|
|
@ -158,12 +158,12 @@ Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|||
VOH405 PPC405EP
|
||||
VOM405 PPC405EP
|
||||
WUH405 PPC405EP
|
||||
CMS700 PPC405EP
|
||||
CMS700 PPC405EP
|
||||
|
||||
Niklaus Giger <niklaus.giger@netstal.com>
|
||||
|
||||
HCU4 PPC405GPr
|
||||
HCU5 PPC440EPx
|
||||
HCU4 PPC405GPr
|
||||
HCU5 PPC440EPx
|
||||
|
||||
Frank Gottschling <fgottschling@eltec.de>
|
||||
|
||||
|
|
|
@ -28,7 +28,9 @@ endif
|
|||
|
||||
LIB = $(obj)lib$(BOARD).a
|
||||
|
||||
COBJS = $(BOARD).o flash.o ../common/misc.o
|
||||
COBJS = $(BOARD).o flash.o \
|
||||
../common/misc.o \
|
||||
../common/esd405ep_nand.o \
|
||||
|
||||
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
|
|
|
@ -23,6 +23,7 @@
|
|||
|
||||
#include <common.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/io.h>
|
||||
#include <command.h>
|
||||
#include <malloc.h>
|
||||
|
||||
|
@ -33,6 +34,7 @@
|
|||
#endif
|
||||
|
||||
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
|
||||
extern void lxt971_no_sleep(void);
|
||||
|
||||
/* fpga configuration data - gzip compressed and generated by bin2c */
|
||||
const unsigned char fpgadata[] =
|
||||
|
@ -164,17 +166,11 @@ int misc_init_r (void)
|
|||
/*
|
||||
* Reset external DUARTs
|
||||
*/
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
|
||||
out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_DUART_RST);
|
||||
udelay(10); /* wait 10us */
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
|
||||
out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_DUART_RST);
|
||||
udelay(1000); /* wait 1ms */
|
||||
|
||||
/*
|
||||
* Set NAND-FLASH GPIO signals to default
|
||||
*/
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);
|
||||
|
||||
/*
|
||||
* Enable interrupts in exar duart mcr[3]
|
||||
*/
|
||||
|
@ -218,35 +214,17 @@ long int initdram (int board_type)
|
|||
mtdcr(memcfga, mem_mb0cf);
|
||||
val = mfdcr(memcfgd);
|
||||
|
||||
#if 0
|
||||
printf("\nmb0cf=%x\n", val); /* test-only */
|
||||
printf("strap=%x\n", mfdcr(strap)); /* test-only */
|
||||
#endif
|
||||
|
||||
return (4*1024*1024 << ((val & 0x000e0000) >> 17));
|
||||
}
|
||||
|
||||
/* ------------------------------------------------------------------------- */
|
||||
|
||||
int testdram (void)
|
||||
void reset_phy(void)
|
||||
{
|
||||
/* TODO: XXX XXX XXX */
|
||||
printf ("test: 16 MB - ok\n");
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
||||
/* ------------------------------------------------------------------------- */
|
||||
|
||||
#if defined(CONFIG_CMD_NAND)
|
||||
#include <linux/mtd/nand_legacy.h>
|
||||
extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
|
||||
|
||||
void nand_init(void)
|
||||
{
|
||||
nand_probe(CFG_NAND_BASE);
|
||||
if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
|
||||
print_size(nand_dev_desc[0].totlen, "\n");
|
||||
}
|
||||
}
|
||||
#ifdef CONFIG_LXT971_NO_SLEEP
|
||||
/*
|
||||
* Disable sleep mode in LXT971
|
||||
*/
|
||||
lxt971_no_sleep();
|
||||
#endif
|
||||
}
|
||||
|
|
|
@ -33,7 +33,10 @@ CPLD = ../common/xilinx_jtag/lenval.o \
|
|||
../common/xilinx_jtag/micro.o \
|
||||
../common/xilinx_jtag/ports.o
|
||||
|
||||
COBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD)
|
||||
COBJS = $(BOARD).o flash.o \
|
||||
../common/misc.o \
|
||||
$(CPLD) \
|
||||
../common/esd405ep_nand.o \
|
||||
|
||||
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
|
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* (C) Copyright 2005
|
||||
* (C) Copyright 2005-2007
|
||||
* Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
|
@ -23,6 +23,7 @@
|
|||
|
||||
#include <common.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/io.h>
|
||||
#include <command.h>
|
||||
#include <malloc.h>
|
||||
|
||||
|
@ -68,9 +69,9 @@ int board_early_init_f (void)
|
|||
/*
|
||||
* Reset CPLD via GPIO12 (CS3) pin
|
||||
*/
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_PLD_RESET);
|
||||
out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_PLD_RESET);
|
||||
udelay(1000); /* wait 1ms */
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) | CFG_PLD_RESET);
|
||||
out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_PLD_RESET);
|
||||
udelay(1000); /* wait 1ms */
|
||||
|
||||
return 0;
|
||||
|
@ -94,13 +95,7 @@ int misc_init_r (void)
|
|||
/*
|
||||
* Setup and enable EEPROM write protection
|
||||
*/
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP);
|
||||
|
||||
/*
|
||||
* Set NAND-FLASH GPIO signals to default
|
||||
*/
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);
|
||||
out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_EEPROM_WP);
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
@ -153,11 +148,6 @@ long int initdram (int board_type)
|
|||
mtdcr(memcfga, mem_mb0cf);
|
||||
val = mfdcr(memcfgd);
|
||||
|
||||
#if 0
|
||||
printf("\nmb0cf=%x\n", val); /* test-only */
|
||||
printf("strap=%x\n", mfdcr(strap)); /* test-only */
|
||||
#endif
|
||||
|
||||
return (4*1024*1024 << ((val & 0x000e0000) >> 17));
|
||||
}
|
||||
|
||||
|
@ -180,17 +170,17 @@ int eeprom_write_enable (unsigned dev_addr, int state)
|
|||
switch (state) {
|
||||
case 1:
|
||||
/* Enable write access, clear bit GPIO_SINT2. */
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_EEPROM_WP);
|
||||
out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_EEPROM_WP);
|
||||
state = 0;
|
||||
break;
|
||||
case 0:
|
||||
/* Disable write access, set bit GPIO_SINT2. */
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP);
|
||||
out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_EEPROM_WP);
|
||||
state = 0;
|
||||
break;
|
||||
default:
|
||||
/* Read current status back. */
|
||||
state = (0 == (in32(GPIO0_OR) & CFG_EEPROM_WP));
|
||||
state = (0 == (in_be32((void *)GPIO0_OR) & CFG_EEPROM_WP));
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
@ -235,19 +225,6 @@ U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
|
|||
|
||||
/* ------------------------------------------------------------------------- */
|
||||
|
||||
#if defined(CONFIG_CMD_NAND)
|
||||
#include <linux/mtd/nand_legacy.h>
|
||||
extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
|
||||
|
||||
void nand_init(void)
|
||||
{
|
||||
nand_probe(CFG_NAND_BASE);
|
||||
if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
|
||||
print_size(nand_dev_desc[0].totlen, "\n");
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
void reset_phy(void)
|
||||
{
|
||||
#ifdef CONFIG_LXT971_NO_SLEEP
|
||||
|
|
|
@ -31,7 +31,9 @@
|
|||
#include <command.h>
|
||||
#include <image.h>
|
||||
#include <asm/byteorder.h>
|
||||
#if defined(CFG_NAND_LEGACY)
|
||||
#include <linux/mtd/nand_legacy.h>
|
||||
#endif
|
||||
#include <fat.h>
|
||||
#include <part.h>
|
||||
|
||||
|
@ -294,6 +296,8 @@ int au_do_update(int i, long sz)
|
|||
rc = nand_legacy_rw(nand_dev_desc, NANDRW_WRITE | NANDRW_JFFS2,
|
||||
start, nbytes, (size_t *)&total, (uchar *)addr);
|
||||
debug ("nand_legacy_rw: ret=%x total=%d nbytes=%d\n", rc, total, nbytes);
|
||||
#else
|
||||
rc = -1;
|
||||
#endif
|
||||
}
|
||||
if (rc != 0) {
|
||||
|
|
87
board/esd/common/esd405ep_nand.c
Normal file
87
board/esd/common/esd405ep_nand.c
Normal file
|
@ -0,0 +1,87 @@
|
|||
/*
|
||||
* (C) Copyright 2007
|
||||
* Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
|
||||
#if defined(CONFIG_CMD_NAND)
|
||||
#include <asm/io.h>
|
||||
#include <nand.h>
|
||||
|
||||
/*
|
||||
* hardware specific access to control-lines
|
||||
*/
|
||||
static void esd405ep_nand_hwcontrol(struct mtd_info *mtdinfo, int cmd)
|
||||
{
|
||||
switch(cmd) {
|
||||
case NAND_CTL_SETCLE:
|
||||
out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CLE);
|
||||
break;
|
||||
case NAND_CTL_CLRCLE:
|
||||
out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_CLE);
|
||||
break;
|
||||
case NAND_CTL_SETALE:
|
||||
out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_ALE);
|
||||
break;
|
||||
case NAND_CTL_CLRALE:
|
||||
out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_ALE);
|
||||
break;
|
||||
case NAND_CTL_SETNCE:
|
||||
out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_CE);
|
||||
break;
|
||||
case NAND_CTL_CLRNCE:
|
||||
out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CE);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* read device ready pin
|
||||
*/
|
||||
static int esd405ep_nand_device_ready(struct mtd_info *mtdinfo)
|
||||
{
|
||||
if (in_be32((void *)GPIO0_IR) & CFG_NAND_RDY)
|
||||
return 1;
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
int board_nand_init(struct nand_chip *nand)
|
||||
{
|
||||
/*
|
||||
* Set NAND-FLASH GPIO signals to defaults
|
||||
*/
|
||||
out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
|
||||
out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CE);
|
||||
|
||||
/*
|
||||
* Initialize nand_chip structure
|
||||
*/
|
||||
nand->hwcontrol = esd405ep_nand_hwcontrol;
|
||||
nand->dev_ready = esd405ep_nand_device_ready;
|
||||
nand->eccmode = NAND_ECC_SOFT;
|
||||
nand->chip_delay = NAND_BIG_DELAY_US;
|
||||
nand->options = NAND_SAMSUNG_LP_OPTIONS;
|
||||
return 0;
|
||||
}
|
||||
#endif
|
|
@ -28,7 +28,10 @@ endif
|
|||
|
||||
LIB = $(obj)lib$(BOARD).a
|
||||
|
||||
COBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o
|
||||
COBJS = $(BOARD).o flash.o \
|
||||
../common/misc.o \
|
||||
../common/esd405ep_nand.o \
|
||||
../common/auto_update.o
|
||||
|
||||
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
|
|
|
@ -5,7 +5,7 @@
|
|||
* (C) Copyright 2005
|
||||
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
||||
*
|
||||
* (C) Copyright 2006
|
||||
* (C) Copyright 2006-2007
|
||||
* Matthias Fuchs, esd GmbH, matthias.fuchs@esd-electronics.com
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
|
@ -476,12 +476,6 @@ int misc_init_r (void)
|
|||
*/
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP);
|
||||
|
||||
/*
|
||||
* Set NAND-FLASH GPIO signals to default
|
||||
*/
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);
|
||||
|
||||
/*
|
||||
* Reset touch-screen controller
|
||||
*/
|
||||
|
@ -690,20 +684,6 @@ void ide_set_reset(int on)
|
|||
#endif /* CONFIG_IDE_RESET */
|
||||
|
||||
|
||||
#if defined(CONFIG_CMD_NAND)
|
||||
#include <linux/mtd/nand_legacy.h>
|
||||
extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
|
||||
|
||||
void nand_init(void)
|
||||
{
|
||||
nand_probe(CFG_NAND_BASE);
|
||||
if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
|
||||
print_size(nand_dev_desc[0].totlen, "\n");
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#if defined(CFG_EEPROM_WREN)
|
||||
/* Input: <dev_addr> I2C address of EEPROM device to enable.
|
||||
* <state> -1: deliver current state
|
||||
|
|
|
@ -28,7 +28,9 @@ endif
|
|||
|
||||
LIB = $(obj)lib$(BOARD).a
|
||||
|
||||
COBJS = $(BOARD).o flash.o ../common/misc.o
|
||||
COBJS = $(BOARD).o flash.o \
|
||||
../common/misc.o \
|
||||
../common/esd405ep_nand.o \
|
||||
|
||||
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
|
|
|
@ -152,12 +152,6 @@ int misc_init_r (void)
|
|||
|
||||
out32(GPIO0_OR, val);
|
||||
|
||||
/*
|
||||
* Set NAND-FLASH GPIO signals to default
|
||||
*/
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);
|
||||
|
||||
/*
|
||||
* check board type and setup AP power
|
||||
*/
|
||||
|
@ -242,33 +236,5 @@ long int initdram (int board_type)
|
|||
mtdcr(memcfga, mem_mb0cf);
|
||||
val = mfdcr(memcfgd);
|
||||
|
||||
#if 0
|
||||
printf("\nmb0cf=%x\n", val); /* test-only */
|
||||
printf("strap=%x\n", mfdcr(strap)); /* test-only */
|
||||
#endif
|
||||
|
||||
return (4*1024*1024 << ((val & 0x000e0000) >> 17));
|
||||
}
|
||||
|
||||
|
||||
int testdram (void)
|
||||
{
|
||||
/* TODO: XXX XXX XXX */
|
||||
printf ("test: 16 MB - ok\n");
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
||||
|
||||
#if defined(CONFIG_CMD_NAND)
|
||||
#include <linux/mtd/nand_legacy.h>
|
||||
extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
|
||||
|
||||
void nand_init(void)
|
||||
{
|
||||
nand_probe(CFG_NAND_BASE);
|
||||
if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
|
||||
print_size(nand_dev_desc[0].totlen, "\n");
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
|
|
@ -28,7 +28,10 @@ endif
|
|||
|
||||
LIB = $(obj)lib$(BOARD).a
|
||||
|
||||
COBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o
|
||||
COBJS = $(BOARD).o flash.o \
|
||||
../common/misc.o \
|
||||
../common/esd405ep_nand.o \
|
||||
../common/auto_update.o
|
||||
|
||||
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
|
|
|
@ -23,6 +23,7 @@
|
|||
|
||||
#include <common.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/io.h>
|
||||
#include <command.h>
|
||||
#include <malloc.h>
|
||||
|
||||
|
@ -31,6 +32,8 @@
|
|||
#define FPGA_DEBUG
|
||||
#endif
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
|
||||
extern void lxt971_no_sleep(void);
|
||||
|
||||
|
@ -114,6 +117,10 @@ int misc_init_r (void)
|
|||
int index;
|
||||
int i;
|
||||
|
||||
/* adjust flash start and offset */
|
||||
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
|
||||
gd->bd->bi_flashoffset = 0;
|
||||
|
||||
dst = malloc(CFG_FPGA_MAX_SIZE);
|
||||
if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
|
||||
printf ("GUNZIP ERROR - must RESET board to recover\n");
|
||||
|
@ -177,17 +184,11 @@ int misc_init_r (void)
|
|||
/*
|
||||
* Reset external DUARTs
|
||||
*/
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
|
||||
out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_DUART_RST);
|
||||
udelay(10); /* wait 10us */
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
|
||||
out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_DUART_RST);
|
||||
udelay(1000); /* wait 1ms */
|
||||
|
||||
/*
|
||||
* Set NAND-FLASH GPIO signals to default
|
||||
*/
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);
|
||||
|
||||
/*
|
||||
* Enable interrupts in exar duart mcr[3]
|
||||
*/
|
||||
|
@ -226,24 +227,10 @@ long int initdram (int board_type)
|
|||
mtdcr(memcfga, mem_mb0cf);
|
||||
val = mfdcr(memcfgd);
|
||||
|
||||
#if 0
|
||||
printf("\nmb0cf=%x\n", val); /* test-only */
|
||||
printf("strap=%x\n", mfdcr(strap)); /* test-only */
|
||||
#endif
|
||||
|
||||
return (4*1024*1024 << ((val & 0x000e0000) >> 17));
|
||||
}
|
||||
|
||||
|
||||
int testdram (void)
|
||||
{
|
||||
/* TODO: XXX XXX XXX */
|
||||
printf ("test: 16 MB - ok\n");
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
||||
|
||||
#ifdef CONFIG_IDE_RESET
|
||||
void ide_set_reset(int on)
|
||||
{
|
||||
|
@ -262,31 +249,6 @@ void ide_set_reset(int on)
|
|||
#endif /* CONFIG_IDE_RESET */
|
||||
|
||||
|
||||
#if defined(CONFIG_CMD_NAND)
|
||||
#include <linux/mtd/nand_legacy.h>
|
||||
extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
|
||||
|
||||
void nand_init(void)
|
||||
{
|
||||
nand_probe(CFG_NAND_BASE);
|
||||
if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
|
||||
print_size(nand_dev_desc[0].totlen, "\n");
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#ifdef CONFIG_AUTO_UPDATE_SHOW
|
||||
void board_auto_update_show(int au_active)
|
||||
{
|
||||
if (au_active) {
|
||||
printf("\n Dies ist die board-funktion: Updating!!!\n");
|
||||
} else {
|
||||
printf("\n Dies ist die board-funktion: Updating done!!!\n");
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
void reset_phy(void)
|
||||
{
|
||||
#ifdef CONFIG_LXT971_NO_SLEEP
|
||||
|
|
|
@ -28,7 +28,9 @@ endif
|
|||
|
||||
LIB = $(obj)lib$(BOARD).a
|
||||
|
||||
COBJS = $(BOARD).o flash.o ../common/misc.o
|
||||
COBJS = $(BOARD).o flash.o \
|
||||
../common/misc.o \
|
||||
../common/esd405ep_nand.o \
|
||||
|
||||
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
|
|
|
@ -194,12 +194,6 @@ int misc_init_r (void)
|
|||
out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
|
||||
udelay(1000); /* wait 1ms */
|
||||
|
||||
/*
|
||||
* Set NAND-FLASH GPIO signals to default
|
||||
*/
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);
|
||||
|
||||
/*
|
||||
* Enable interrupts in exar duart mcr[3]
|
||||
*/
|
||||
|
@ -340,17 +334,3 @@ void ide_set_reset(int on)
|
|||
}
|
||||
}
|
||||
#endif /* CONFIG_IDE_RESET */
|
||||
|
||||
|
||||
#if defined(CONFIG_CMD_NAND)
|
||||
#include <linux/mtd/nand_legacy.h>
|
||||
extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
|
||||
|
||||
void nand_init(void)
|
||||
{
|
||||
nand_probe(CFG_NAND_BASE);
|
||||
if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
|
||||
print_size(nand_dev_desc[0].totlen, "\n");
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
|
|
@ -28,7 +28,9 @@ endif
|
|||
|
||||
LIB = $(obj)lib$(BOARD).a
|
||||
|
||||
COBJS = $(BOARD).o flash.o ../common/misc.o
|
||||
COBJS = $(BOARD).o flash.o \
|
||||
../common/misc.o \
|
||||
../common/esd405ep_nand.o \
|
||||
|
||||
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
|
|
|
@ -169,12 +169,6 @@ int misc_init_r (void)
|
|||
out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
|
||||
udelay(1000); /* wait 1ms */
|
||||
|
||||
/*
|
||||
* Set NAND-FLASH GPIO signals to default
|
||||
*/
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);
|
||||
|
||||
/*
|
||||
* Enable interrupts in exar duart mcr[3]
|
||||
*/
|
||||
|
@ -218,35 +212,5 @@ long int initdram (int board_type)
|
|||
mtdcr(memcfga, mem_mb0cf);
|
||||
val = mfdcr(memcfgd);
|
||||
|
||||
#if 0
|
||||
printf("\nmb0cf=%x\n", val); /* test-only */
|
||||
printf("strap=%x\n", mfdcr(strap)); /* test-only */
|
||||
#endif
|
||||
|
||||
return (4*1024*1024 << ((val & 0x000e0000) >> 17));
|
||||
}
|
||||
|
||||
/* ------------------------------------------------------------------------- */
|
||||
|
||||
int testdram (void)
|
||||
{
|
||||
/* TODO: XXX XXX XXX */
|
||||
printf ("test: 16 MB - ok\n");
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
||||
/* ------------------------------------------------------------------------- */
|
||||
|
||||
#if defined(CONFIG_CMD_NAND)
|
||||
#include <linux/mtd/nand_legacy.h>
|
||||
extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
|
||||
|
||||
void nand_init(void)
|
||||
{
|
||||
nand_probe(CFG_NAND_BASE);
|
||||
if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
|
||||
print_size(nand_dev_desc[0].totlen, "\n");
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
|
|
@ -468,14 +468,31 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand,
|
|||
ulong offset, ulong addr, char *cmd)
|
||||
{
|
||||
int r;
|
||||
char *ep;
|
||||
char *ep, *s;
|
||||
ulong cnt;
|
||||
image_header_t *hdr;
|
||||
int jffs2 = 0;
|
||||
|
||||
s = strchr(cmd, '.');
|
||||
if (s != NULL &&
|
||||
(!strcmp(s, ".jffs2") || !strcmp(s, ".e") || !strcmp(s, ".i")))
|
||||
jffs2 = 1;
|
||||
|
||||
printf("\nLoading from %s, offset 0x%lx\n", nand->name, offset);
|
||||
|
||||
cnt = nand->oobblock;
|
||||
r = nand_read(nand, offset, &cnt, (u_char *) addr);
|
||||
if (jffs2) {
|
||||
nand_read_options_t opts;
|
||||
memset(&opts, 0, sizeof(opts));
|
||||
opts.buffer = (u_char*) addr;
|
||||
opts.length = cnt;
|
||||
opts.offset = offset;
|
||||
opts.quiet = 1;
|
||||
r = nand_read_opts(nand, &opts);
|
||||
} else {
|
||||
r = nand_read(nand, offset, &cnt, (u_char *) addr);
|
||||
}
|
||||
|
||||
if (r) {
|
||||
puts("** Read error\n");
|
||||
show_boot_progress (-56);
|
||||
|
@ -495,8 +512,18 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand,
|
|||
print_image_hdr(hdr);
|
||||
|
||||
cnt = (ntohl(hdr->ih_size) + sizeof (image_header_t));
|
||||
if (jffs2) {
|
||||
nand_read_options_t opts;
|
||||
memset(&opts, 0, sizeof(opts));
|
||||
opts.buffer = (u_char*) addr;
|
||||
opts.length = cnt;
|
||||
opts.offset = offset;
|
||||
opts.quiet = 1;
|
||||
r = nand_read_opts(nand, &opts);
|
||||
} else {
|
||||
r = nand_read(nand, offset, &cnt, (u_char *) addr);
|
||||
}
|
||||
|
||||
r = nand_read(nand, offset, &cnt, (u_char *) addr);
|
||||
if (r) {
|
||||
puts("** Read error\n");
|
||||
show_boot_progress (-58);
|
||||
|
@ -545,7 +572,7 @@ int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
|
|||
if (argc > 3)
|
||||
goto usage;
|
||||
if (argc == 3)
|
||||
addr = simple_strtoul(argv[2], NULL, 16);
|
||||
addr = simple_strtoul(argv[1], NULL, 16);
|
||||
else
|
||||
addr = CFG_LOAD_ADDR;
|
||||
return nand_load_image(cmdtp, &nand_info[dev->id->num],
|
||||
|
@ -604,7 +631,7 @@ usage:
|
|||
|
||||
U_BOOT_CMD(nboot, 4, 1, do_nandboot,
|
||||
"nboot - boot from NAND device\n",
|
||||
"[partition] | [[[loadAddr] dev] offset]\n");
|
||||
"[.jffs2] [partition] | [[[loadAddr] dev] offset]\n");
|
||||
|
||||
#endif
|
||||
|
||||
|
|
|
@ -123,6 +123,7 @@ struct nand_manufacturers nand_manuf_ids[] = {
|
|||
{NAND_MFR_NATIONAL, "National"},
|
||||
{NAND_MFR_RENESAS, "Renesas"},
|
||||
{NAND_MFR_STMICRO, "ST Micro"},
|
||||
{NAND_MFR_MICRON, "Micron"},
|
||||
{0x0, "Unknown"}
|
||||
};
|
||||
#endif
|
||||
|
|
|
@ -53,9 +53,13 @@
|
|||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||||
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
|
||||
#define CONFIG_NET_MULTI 1
|
||||
#undef CONFIG_HAS_ETH1
|
||||
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#define CONFIG_PHY_ADDR 0 /* PHY address */
|
||||
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
|
||||
#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */
|
||||
|
||||
#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
|
||||
|
||||
|
@ -144,39 +148,16 @@
|
|||
* NAND-FLASH stuff
|
||||
*-----------------------------------------------------------------------
|
||||
*/
|
||||
#define CFG_NAND_BASE_LIST { CFG_NAND_BASE }
|
||||
#define NAND_MAX_CHIPS 1
|
||||
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
|
||||
#define NAND_BIG_DELAY_US 25
|
||||
|
||||
#define CFG_NAND_LEGACY
|
||||
#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */
|
||||
#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */
|
||||
#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
|
||||
#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
|
||||
|
||||
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
|
||||
#define SECTORSIZE 512
|
||||
|
||||
#define ADDR_COLUMN 1
|
||||
#define ADDR_PAGE 2
|
||||
#define ADDR_COLUMN_PAGE 3
|
||||
|
||||
#define NAND_ChipID_UNKNOWN 0x00
|
||||
#define NAND_MAX_FLOORS 1
|
||||
#define NAND_MAX_CHIPS 1
|
||||
|
||||
#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */
|
||||
#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
|
||||
#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
|
||||
#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */
|
||||
|
||||
#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0)
|
||||
#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0)
|
||||
#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0)
|
||||
#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0)
|
||||
#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0)
|
||||
#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0)
|
||||
#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY))
|
||||
|
||||
#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
|
||||
#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
|
||||
#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
|
||||
#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
|
||||
|
||||
#define CONFIG_MTD_NAND_VERIFY_WRITE 1 /* verify all writes!!! */
|
||||
#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
|
|
|
@ -90,8 +90,6 @@
|
|||
#define CONFIG_CMD_EEPROM
|
||||
|
||||
|
||||
#define CFG_NAND_LEGACY
|
||||
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
|
||||
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
|
||||
|
@ -157,34 +155,15 @@
|
|||
* NAND-FLASH stuff
|
||||
*-----------------------------------------------------------------------
|
||||
*/
|
||||
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
|
||||
#define SECTORSIZE 512
|
||||
#define CFG_NAND_BASE_LIST { CFG_NAND_BASE }
|
||||
#define NAND_MAX_CHIPS 1
|
||||
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
|
||||
#define NAND_BIG_DELAY_US 25
|
||||
|
||||
#define ADDR_COLUMN 1
|
||||
#define ADDR_PAGE 2
|
||||
#define ADDR_COLUMN_PAGE 3
|
||||
|
||||
#define NAND_ChipID_UNKNOWN 0x00
|
||||
#define NAND_MAX_FLOORS 1
|
||||
#define NAND_MAX_CHIPS 1
|
||||
|
||||
#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */
|
||||
#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
|
||||
#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
|
||||
#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */
|
||||
|
||||
#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0)
|
||||
#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0)
|
||||
#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0)
|
||||
#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0)
|
||||
#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0)
|
||||
#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0)
|
||||
#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY))
|
||||
|
||||
#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
|
||||
#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
|
||||
#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
|
||||
#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
|
||||
#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */
|
||||
#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */
|
||||
#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
|
||||
#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
|
||||
|
||||
#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
|
||||
|
||||
|
|
|
@ -92,8 +92,6 @@
|
|||
|
||||
#define CONFIG_SUPPORT_VFAT
|
||||
|
||||
#define CFG_NAND_LEGACY
|
||||
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
|
||||
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
|
||||
|
|
|
@ -114,8 +114,6 @@
|
|||
#define CONFIG_AUTO_UPDATE 1 /* autoupdate via compactflash */
|
||||
#endif
|
||||
|
||||
#define CFG_NAND_LEGACY
|
||||
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
|
||||
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
|
||||
|
|
|
@ -100,9 +100,6 @@
|
|||
|
||||
#define CONFIG_SUPPORT_VFAT
|
||||
|
||||
#define CFG_NAND_LEGACY
|
||||
|
||||
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
|
||||
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
|
||||
|
|
|
@ -111,8 +111,6 @@
|
|||
|
||||
#undef CONFIG_AUTO_UPDATE /* autoupdate via compactflash */
|
||||
|
||||
#define CFG_NAND_LEGACY
|
||||
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
|
||||
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
|
||||
|
|
|
@ -141,8 +141,6 @@
|
|||
#define CONFIG_AUTO_UPDATE 1 /* autoupdate via compactflash */
|
||||
#undef CONFIG_AUTO_UPDATE_SHOW /* use board show routine */
|
||||
|
||||
#define CFG_NAND_LEGACY
|
||||
|
||||
#undef CONFIG_BZIP2 /* include support for bzip2 compressed images */
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
|
||||
|
@ -209,34 +207,15 @@
|
|||
* NAND-FLASH stuff
|
||||
*-----------------------------------------------------------------------
|
||||
*/
|
||||
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
|
||||
#define SECTORSIZE 512
|
||||
#define CFG_NAND_BASE_LIST { CFG_NAND_BASE }
|
||||
#define NAND_MAX_CHIPS 1
|
||||
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
|
||||
#define NAND_BIG_DELAY_US 25
|
||||
|
||||
#define ADDR_COLUMN 1
|
||||
#define ADDR_PAGE 2
|
||||
#define ADDR_COLUMN_PAGE 3
|
||||
|
||||
#define NAND_ChipID_UNKNOWN 0x00
|
||||
#define NAND_MAX_FLOORS 1
|
||||
#define NAND_MAX_CHIPS 1
|
||||
|
||||
#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */
|
||||
#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
|
||||
#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
|
||||
#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */
|
||||
|
||||
#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0)
|
||||
#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0)
|
||||
#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0)
|
||||
#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0)
|
||||
#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0)
|
||||
#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0)
|
||||
#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY))
|
||||
|
||||
#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
|
||||
#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
|
||||
#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
|
||||
#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
|
||||
#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */
|
||||
#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */
|
||||
#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
|
||||
#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
|
||||
|
||||
#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
|
||||
|
||||
|
|
|
@ -147,36 +147,15 @@
|
|||
* NAND-FLASH stuff
|
||||
*-----------------------------------------------------------------------
|
||||
*/
|
||||
#define CFG_NAND_LEGACY
|
||||
#define CFG_NAND_BASE_LIST { CFG_NAND_BASE }
|
||||
#define NAND_MAX_CHIPS 1
|
||||
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
|
||||
#define NAND_BIG_DELAY_US 25
|
||||
|
||||
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
|
||||
#define SECTORSIZE 512
|
||||
|
||||
#define ADDR_COLUMN 1
|
||||
#define ADDR_PAGE 2
|
||||
#define ADDR_COLUMN_PAGE 3
|
||||
|
||||
#define NAND_ChipID_UNKNOWN 0x00
|
||||
#define NAND_MAX_FLOORS 1
|
||||
#define NAND_MAX_CHIPS 1
|
||||
|
||||
#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */
|
||||
#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
|
||||
#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
|
||||
#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */
|
||||
|
||||
#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0)
|
||||
#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0)
|
||||
#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0)
|
||||
#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0)
|
||||
#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0)
|
||||
#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0)
|
||||
#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY))
|
||||
|
||||
#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
|
||||
#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
|
||||
#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
|
||||
#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
|
||||
#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */
|
||||
#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */
|
||||
#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
|
||||
#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
|
||||
|
||||
#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
|
||||
|
||||
|
|
|
@ -96,7 +96,6 @@
|
|||
#define CONFIG_SUPPORT_VFAT
|
||||
|
||||
#define CONFIG_AUTO_UPDATE 1 /* autoupdate via compactflash */
|
||||
#define CONFIG_AUTO_UPDATE_SHOW 1 /* use board show routine */
|
||||
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
|
||||
|
@ -168,36 +167,15 @@
|
|||
* NAND-FLASH stuff
|
||||
*-----------------------------------------------------------------------
|
||||
*/
|
||||
#define CFG_NAND_LEGACY
|
||||
#define CFG_NAND_BASE_LIST { CFG_NAND_BASE }
|
||||
#define NAND_MAX_CHIPS 1
|
||||
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
|
||||
#define NAND_BIG_DELAY_US 25
|
||||
|
||||
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
|
||||
#define SECTORSIZE 512
|
||||
|
||||
#define ADDR_COLUMN 1
|
||||
#define ADDR_PAGE 2
|
||||
#define ADDR_COLUMN_PAGE 3
|
||||
|
||||
#define NAND_ChipID_UNKNOWN 0x00
|
||||
#define NAND_MAX_FLOORS 1
|
||||
#define NAND_MAX_CHIPS 1
|
||||
|
||||
#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */
|
||||
#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
|
||||
#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
|
||||
#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */
|
||||
|
||||
#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0)
|
||||
#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0)
|
||||
#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0)
|
||||
#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0)
|
||||
#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0)
|
||||
#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0)
|
||||
#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY))
|
||||
|
||||
#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
|
||||
#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
|
||||
#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
|
||||
#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
|
||||
#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */
|
||||
#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */
|
||||
#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
|
||||
#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
|
||||
|
||||
#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
|
||||
|
||||
|
@ -276,11 +254,6 @@
|
|||
|
||||
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
|
||||
|
||||
#if 0 /* test-only */
|
||||
#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */
|
||||
#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Start addresses for the final memory configuration
|
||||
* (Set up by the startup code)
|
||||
|
@ -306,9 +279,6 @@
|
|||
#define CFG_ENV_SIZE 0x700 /* 2048 bytes may be used for env vars*/
|
||||
/* total size of a CAT24WC16 is 2048 bytes */
|
||||
|
||||
#define CFG_NVRAM_BASE_ADDR 0xF0000500 /* NVRAM base address */
|
||||
#define CFG_NVRAM_SIZE 242 /* NVRAM size */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* I2C EEPROM (CAT24WC16) for environment
|
||||
*/
|
||||
|
@ -317,7 +287,7 @@
|
|||
#define CFG_I2C_SLAVE 0x7F
|
||||
|
||||
#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT24WC08 */
|
||||
#if 1 /* test-only */
|
||||
|
||||
/* CAT24WC08/16... */
|
||||
#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
|
||||
/* mask of address bits that overflow into the "EEPROM chip address" */
|
||||
|
@ -325,15 +295,6 @@
|
|||
#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
|
||||
/* 16 byte page write mode using*/
|
||||
/* last 4 bits of the address */
|
||||
#else
|
||||
/* CAT24WC32/64... */
|
||||
#define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
|
||||
/* mask of address bits that overflow into the "EEPROM chip address" */
|
||||
#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x01
|
||||
#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* The Catalyst CAT24WC32 has */
|
||||
/* 32 byte page write mode using*/
|
||||
/* last 5 bits of the address */
|
||||
#endif
|
||||
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
|
||||
#define CFG_EEPROM_PAGE_WRITE_ENABLE
|
||||
|
||||
|
|
|
@ -153,36 +153,15 @@
|
|||
* NAND-FLASH stuff
|
||||
*-----------------------------------------------------------------------
|
||||
*/
|
||||
#define CFG_NAND_LEGACY
|
||||
#define CFG_NAND_BASE_LIST { CFG_NAND_BASE }
|
||||
#define NAND_MAX_CHIPS 1
|
||||
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
|
||||
#define NAND_BIG_DELAY_US 25
|
||||
|
||||
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
|
||||
#define SECTORSIZE 512
|
||||
|
||||
#define ADDR_COLUMN 1
|
||||
#define ADDR_PAGE 2
|
||||
#define ADDR_COLUMN_PAGE 3
|
||||
|
||||
#define NAND_ChipID_UNKNOWN 0x00
|
||||
#define NAND_MAX_FLOORS 1
|
||||
#define NAND_MAX_CHIPS 1
|
||||
|
||||
#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */
|
||||
#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
|
||||
#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
|
||||
#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */
|
||||
|
||||
#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0)
|
||||
#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0)
|
||||
#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0)
|
||||
#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0)
|
||||
#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0)
|
||||
#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0)
|
||||
#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY))
|
||||
|
||||
#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
|
||||
#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
|
||||
#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
|
||||
#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
|
||||
#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */
|
||||
#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */
|
||||
#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
|
||||
#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
|
||||
|
||||
#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
|
||||
|
||||
|
|
|
@ -145,38 +145,16 @@
|
|||
* NAND-FLASH stuff
|
||||
*-----------------------------------------------------------------------
|
||||
*/
|
||||
#define CFG_NAND_LEGACY
|
||||
#define CFG_NAND_BASE_LIST { CFG_NAND_BASE }
|
||||
#define NAND_MAX_CHIPS 1
|
||||
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
|
||||
#define NAND_BIG_DELAY_US 25
|
||||
|
||||
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
|
||||
#define SECTORSIZE 512
|
||||
#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */
|
||||
#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */
|
||||
#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
|
||||
#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
|
||||
|
||||
#define ADDR_COLUMN 1
|
||||
#define ADDR_PAGE 2
|
||||
#define ADDR_COLUMN_PAGE 3
|
||||
|
||||
#define NAND_ChipID_UNKNOWN 0x00
|
||||
#define NAND_MAX_FLOORS 1
|
||||
#define NAND_MAX_CHIPS 1
|
||||
|
||||
#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */
|
||||
#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
|
||||
#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
|
||||
#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */
|
||||
|
||||
#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0)
|
||||
#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0)
|
||||
#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0)
|
||||
#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0)
|
||||
#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0)
|
||||
#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0)
|
||||
#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY))
|
||||
|
||||
#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
|
||||
#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
|
||||
#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
|
||||
#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
|
||||
|
||||
#define CONFIG_MTD_NAND_VERIFY_WRITE 1 /* verify all writes!!! */
|
||||
#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
|
|
|
@ -348,6 +348,7 @@ struct nand_chip {
|
|||
#define NAND_MFR_NATIONAL 0x8f
|
||||
#define NAND_MFR_RENESAS 0x07
|
||||
#define NAND_MFR_STMICRO 0x20
|
||||
#define NAND_MFR_MICRON 0x2c
|
||||
|
||||
/**
|
||||
* struct nand_flash_dev - NAND Flash Device ID Structure
|
||||
|
|
|
@ -32,6 +32,7 @@ typedef struct mtd_info nand_info_t;
|
|||
|
||||
extern int nand_curr_device;
|
||||
extern nand_info_t nand_info[];
|
||||
extern void nand_init(void);
|
||||
|
||||
static inline int nand_read(nand_info_t *info, ulong ofs, ulong *len, u_char *buf)
|
||||
{
|
||||
|
|
Loading…
Reference in a new issue