arm, da85x: update for the ipam390 board
- switch to correct ecc layout used by the RBL enable CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC - update default environment - change A2CR to correct value for UART boot mode - adapt cs3cfg timings for nand - change LED bootmode signalization Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com>utp
Heiko Schocher
Tom Rini
parent
2fff63c2a5
commit
660a2e650d
|
|
@ -109,7 +109,7 @@ CLK2XSRC = 0x00000000
|
|||
;NANDFCR = 0x00000000
|
||||
[EMIF25ASYNC]
|
||||
A1CR = 0x00000000
|
||||
A2CR = 0x3FFFFFFE
|
||||
A2CR = 0x04202110
|
||||
A3CR = 0x00000000
|
||||
A4CR = 0x00000000
|
||||
NANDFCR = 0x00000012
|
||||
|
|
|
|||
|
|
@ -264,7 +264,7 @@ void show_boot_progress(int status)
|
|||
static int green;
|
||||
|
||||
if (red == 0)
|
||||
red = init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_OFF);
|
||||
red = init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_ON);
|
||||
if (red != CONFIG_IPAM390_GPIO_LED_RED)
|
||||
return;
|
||||
if (green == 0)
|
||||
|
|
@ -277,10 +277,10 @@ void show_boot_progress(int status)
|
|||
case BOOTSTAGE_ID_RUN_OS:
|
||||
/*
|
||||
* set normal state
|
||||
* LED Red : off
|
||||
* LED Red : on
|
||||
* LED green: off
|
||||
*/
|
||||
gpio_set_value(red, LED_OFF);
|
||||
gpio_set_value(red, LED_ON);
|
||||
gpio_set_value(green, LED_OFF);
|
||||
break;
|
||||
case BOOTSTAGE_ID_MAIN_LOOP:
|
||||
|
|
@ -326,23 +326,12 @@ int spl_start_uboot(void)
|
|||
if (!bootmode)
|
||||
if (ret == 0)
|
||||
bootmode = 1;
|
||||
if (bootmode) {
|
||||
/*
|
||||
* Booting U-Boot
|
||||
* LED Red : on
|
||||
* LED green: off
|
||||
*/
|
||||
init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_ON);
|
||||
init_led(CONFIG_IPAM390_GPIO_LED_GREEN, "green", LED_OFF);
|
||||
} else {
|
||||
/*
|
||||
* Booting Linux
|
||||
* LED Red : off
|
||||
* LED green: off
|
||||
*/
|
||||
init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_OFF);
|
||||
init_led(CONFIG_IPAM390_GPIO_LED_GREEN, "green", LED_OFF);
|
||||
}
|
||||
/*
|
||||
* LED red : on
|
||||
* LED green: off
|
||||
*/
|
||||
init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_ON);
|
||||
init_led(CONFIG_IPAM390_GPIO_LED_GREEN, "green", LED_OFF);
|
||||
return bootmode;
|
||||
}
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -122,13 +122,13 @@
|
|||
(3 << DV_DDR_SDCR_IBANK_SHIFT) | \
|
||||
(2 << DV_DDR_SDCR_PAGESIZE_SHIFT))
|
||||
|
||||
#define CONFIG_SYS_DA850_CS3CFG (DAVINCI_ABCR_WSETUP(2) | \
|
||||
#define CONFIG_SYS_DA850_CS3CFG (DAVINCI_ABCR_WSETUP(1) | \
|
||||
DAVINCI_ABCR_WSTROBE(2) | \
|
||||
DAVINCI_ABCR_WHOLD(1) | \
|
||||
DAVINCI_ABCR_WHOLD(0) | \
|
||||
DAVINCI_ABCR_RSETUP(1) | \
|
||||
DAVINCI_ABCR_RSTROBE(4) | \
|
||||
DAVINCI_ABCR_RHOLD(0) | \
|
||||
DAVINCI_ABCR_TA(1) | \
|
||||
DAVINCI_ABCR_RSTROBE(2) | \
|
||||
DAVINCI_ABCR_RHOLD(1) | \
|
||||
DAVINCI_ABCR_TA(0) | \
|
||||
DAVINCI_ABCR_ASIZE_8BIT)
|
||||
|
||||
|
||||
|
|
@ -161,6 +161,7 @@
|
|||
#undef CONFIG_SYS_NAND_HW_ECC
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
|
||||
#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
|
||||
#define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC
|
||||
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
||||
#define CONFIG_SYS_NAND_PAGE_SIZE (2 << 10)
|
||||
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10)
|
||||
|
|
@ -173,11 +174,10 @@
|
|||
CONFIG_SYS_MALLOC_LEN - \
|
||||
GENERATED_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_NAND_ECCPOS { \
|
||||
24, 25, 26, 27, 28, \
|
||||
29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \
|
||||
39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \
|
||||
49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \
|
||||
59, 60, 61, 62, 63 }
|
||||
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, \
|
||||
22, 23, 24, 25, 26, 27, 28, 29, 30, 31, \
|
||||
38, 39, 40, 41, 42, 43, 44, 45, 46, 47, \
|
||||
54, 55, 56, 57, 58, 59, 60, 61, 62, 63}
|
||||
#define CONFIG_SYS_NAND_PAGE_COUNT 64
|
||||
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
|
||||
#define CONFIG_SYS_NAND_ECCSIZE 512
|
||||
|
|
@ -230,15 +230,24 @@
|
|||
#define CONFIG_CMDLINE_TAG
|
||||
#define CONFIG_REVISION_TAG
|
||||
#define CONFIG_SETUP_MEMORY_TAGS
|
||||
#define CONFIG_BOOTARGS \
|
||||
"mem=128M console=ttyS0,115200n8 root=/dev/mtdblock0p4 rw noinitrd ip=dhcp"
|
||||
#define CONFIG_BOOTDELAY 3
|
||||
#define CONFIG_BOOTDELAY 2
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"defbootargs=setenv bootargs mem=128M console=ttyS0,115200n8 " \
|
||||
"root=/dev/mtdblock5 rw noinitrd " \
|
||||
"rootfstype=jffs2 noinitrd\0" \
|
||||
"hwconfig=dsp:wake=yes\0" \
|
||||
"bootcmd=nboot kernel;run defbootargs addmtd;bootm 0xc0700000\0" \
|
||||
"bootfile=uImage\0" \
|
||||
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
|
||||
"mtddevname=uboot-env\0" \
|
||||
"mtddevnum=0\0" \
|
||||
"mtdids=" MTDIDS_DEFAULT "\0" \
|
||||
"mtdparts=" MTDPARTS_DEFAULT "\0" \
|
||||
"u-boot=/tftpboot/ipam390/u-boot.ais\0" \
|
||||
"upd_uboot=tftp c0000000 ${u-boot};nand erase.part u-boot;" \
|
||||
"nand write c0000000 20000 ${filesize}\0" \
|
||||
"setbootparms=nand read c0100000 200000 400000;" \
|
||||
"run defbootargs addmtd;" \
|
||||
"spl export atags c0100000;" \
|
||||
"nand erase.part bootparms;" \
|
||||
"nand write c0000100 180000 20000\0" \
|
||||
|
|
|
|||
Loading…
Reference in New Issue