arm: Remove vl_ma2sc board
This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>utp
Simon Glass
Tom Rini
parent
bee2b99d06
commit
6e830dfc1a
|
|
@ -91,10 +91,6 @@ config TARGET_SAMA5D4EK
|
|||
select CPU_V7
|
||||
select SUPPORT_SPL
|
||||
|
||||
config TARGET_VL_MA2SC
|
||||
bool "Support vl_ma2sc"
|
||||
select CPU_ARM926EJS
|
||||
|
||||
config TARGET_MEESC
|
||||
bool "Support meesc"
|
||||
select CPU_ARM926EJS
|
||||
|
|
@ -132,7 +128,6 @@ source "board/atmel/sama5d3xek/Kconfig"
|
|||
source "board/atmel/sama5d4_xplained/Kconfig"
|
||||
source "board/atmel/sama5d4ek/Kconfig"
|
||||
source "board/bluewater/snapper9260/Kconfig"
|
||||
source "board/BuS/vl_ma2sc/Kconfig"
|
||||
source "board/calao/usb_a9263/Kconfig"
|
||||
source "board/egnite/ethernut5/Kconfig"
|
||||
source "board/esd/meesc/Kconfig"
|
||||
|
|
|
|||
|
|
@ -1,12 +0,0 @@
|
|||
if TARGET_VL_MA2SC
|
||||
|
||||
config SYS_BOARD
|
||||
default "vl_ma2sc"
|
||||
|
||||
config SYS_VENDOR
|
||||
default "BuS"
|
||||
|
||||
config SYS_CONFIG_NAME
|
||||
default "vl_ma2sc"
|
||||
|
||||
endif
|
||||
|
|
@ -1,7 +0,0 @@
|
|||
VL_MA2SC BOARD
|
||||
M: Jens Scharsig <esw@bus-elektronik.de>
|
||||
S: Maintained
|
||||
F: board/BuS/vl_ma2sc/
|
||||
F: include/configs/vl_ma2sc.h
|
||||
F: configs/vl_ma2sc_defconfig
|
||||
F: configs/vl_ma2sc_ram_defconfig
|
||||
|
|
@ -1,12 +0,0 @@
|
|||
#
|
||||
# (C) Copyright 2003-2008
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# (C) Copyright 2009-2012
|
||||
# Jens Scharsig <esw@bus-elekronik.de>
|
||||
# BuS Elektronik GmbH & Co. KG
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y += vl_ma2sc.o
|
||||
|
|
@ -1,519 +0,0 @@
|
|||
/*
|
||||
* (C) Copyright 2009-2012
|
||||
* Jens Scharsig <esw@bus-elekronik.de>
|
||||
* BuS Elektronik GmbH & Co. KG
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <config.h>
|
||||
#include <common.h>
|
||||
#include <linux/sizes.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/gpio.h>
|
||||
#include <asm/arch/hardware.h>
|
||||
#include <asm/arch/clk.h>
|
||||
#include <asm/arch/at91_matrix.h>
|
||||
#include <asm/arch/at91sam9_smc.h>
|
||||
#include <asm/arch/at91_pmc.h>
|
||||
#include <asm/arch/at91_pio.h>
|
||||
#include <asm/arch/at91sam9263.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
#include <asm/arch/at91_common.h>
|
||||
#include <lcd.h>
|
||||
#include <i2c.h>
|
||||
#include <atmel_lcdc.h>
|
||||
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
|
||||
#include <net.h>
|
||||
#endif
|
||||
#include <netdev.h>
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
static void vl_ma2sc_nand_hw_init(void)
|
||||
{
|
||||
unsigned long csa;
|
||||
at91_smc_t *smc = (at91_smc_t *) ATMEL_BASE_SMC0;
|
||||
at91_matrix_t *matrix = (at91_matrix_t *) ATMEL_BASE_MATRIX;
|
||||
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
||||
|
||||
at91_set_pio_output(AT91_PIO_PORTA, 13, 1); /* CAN_TX -> H */
|
||||
at91_set_pio_output(AT91_PIO_PORTA, 12, 1); /* CAN_STB -> H */
|
||||
at91_set_pio_output(AT91_PIO_PORTA, 11, 1); /* CAN_EN -> H */
|
||||
|
||||
/* Enable CS3 */
|
||||
csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A;
|
||||
writel(csa, &matrix->csa[0]);
|
||||
|
||||
/* Configure SMC CS3 for NAND/SmartMedia */
|
||||
writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
|
||||
AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
|
||||
&smc->cs[3].setup);
|
||||
|
||||
writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
|
||||
AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
|
||||
&smc->cs[3].pulse);
|
||||
|
||||
writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
|
||||
&smc->cs[3].cycle);
|
||||
writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
|
||||
AT91_SMC_MODE_DBW_8 |
|
||||
AT91_SMC_MODE_TDF_CYCLE(2),
|
||||
&smc->cs[3].mode);
|
||||
writel((1 << ATMEL_ID_PIOB) | (1 << ATMEL_ID_PIOCDE),
|
||||
&pmc->pcer);
|
||||
|
||||
/* Configure RDY/BSY */
|
||||
#ifdef CONFIG_SYS_NAND_READY_PIN
|
||||
gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
|
||||
#endif
|
||||
/* Enable NandFlash */
|
||||
gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MACB
|
||||
static void vl_ma2sc_macb_hw_init(void)
|
||||
{
|
||||
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
||||
|
||||
/* Enable clock */
|
||||
writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
|
||||
|
||||
at91_phy_reset();
|
||||
|
||||
at91_macb_hw_init();
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_LCD
|
||||
vidinfo_t panel_info = {
|
||||
.vl_col = 320,
|
||||
.vl_row = 240,
|
||||
.vl_clk = 6500000,
|
||||
.vl_sync = ATMEL_LCDC_INVDVAL_INVERTED |
|
||||
ATMEL_LCDC_INVLINE_INVERTED |
|
||||
ATMEL_LCDC_INVVD_INVERTED |
|
||||
ATMEL_LCDC_INVFRAME_INVERTED,
|
||||
.vl_bpix = (ATMEL_LCDC_PIXELSIZE_8 >> 5),
|
||||
.vl_tft = 1,
|
||||
.vl_hsync_len = 5, /* Horiz Sync Pulse Width */
|
||||
.vl_left_margin = 68, /* horiz back porch */
|
||||
.vl_right_margin = 20, /* horiz front porch */
|
||||
.vl_vsync_len = 2, /* vert Sync Pulse Width */
|
||||
.vl_upper_margin = 18, /* vert back porch */
|
||||
.vl_lower_margin = 4, /* vert front porch */
|
||||
.mmio = ATMEL_BASE_LCDC,
|
||||
};
|
||||
|
||||
void lcd_enable(void)
|
||||
{
|
||||
}
|
||||
|
||||
void lcd_disable(void)
|
||||
{
|
||||
}
|
||||
|
||||
static void vl_ma2sc_lcd_hw_init(void)
|
||||
{
|
||||
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
||||
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDVSYNC */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDHSYNC */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDDOTCK */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDDEN */
|
||||
at91_set_b_periph(AT91_PIO_PORTB, 9, 0); /* LCDCC */
|
||||
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD0 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD1 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD2 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD3 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD4 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD5 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD6 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD7 */
|
||||
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD9 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD10 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD11 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD12 */
|
||||
at91_set_b_periph(AT91_PIO_PORTC, 12, 0); /* LCDD13 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD14 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD15 */
|
||||
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD26 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD17 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD18 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD19 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDD20 */
|
||||
at91_set_b_periph(AT91_PIO_PORTC, 17, 0); /* LCDD21 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDD22 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDD23 */
|
||||
|
||||
at91_set_pio_output(AT91_PIO_PORTE, 0, 0); /* LCD QXH */
|
||||
|
||||
at91_set_pio_output(AT91_PIO_PORTE, 2, 0); /* LCD SHUT */
|
||||
at91_set_pio_output(AT91_PIO_PORTE, 3, 1); /* LCD TopBottom */
|
||||
at91_set_pio_output(AT91_PIO_PORTE, 4, 0); /* LCD REV */
|
||||
at91_set_pio_output(AT91_PIO_PORTE, 5, 1); /* LCD RightLeft */
|
||||
at91_set_pio_output(AT91_PIO_PORTE, 6, 0); /* LCD Color Mode CM */
|
||||
at91_set_pio_output(AT91_PIO_PORTE, 7, 0); /* LCD BGR */
|
||||
|
||||
at91_set_pio_output(AT91_PIO_PORTB, 9, 0); /* LCD CC */
|
||||
|
||||
writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
|
||||
gd->fb_base = ATMEL_BASE_SRAM0;
|
||||
}
|
||||
#endif /* Config LCD */
|
||||
|
||||
#ifdef CONFIG_BOARD_EARLY_INIT_F
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
||||
|
||||
/* Enable clocks for all PIOs */
|
||||
writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) |
|
||||
(1 << ATMEL_ID_PIOCDE),
|
||||
&pmc->pcer);
|
||||
|
||||
at91_seriald_hw_init();
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
at91_smc_t *smc = (at91_smc_t *) ATMEL_BASE_SMC0;
|
||||
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
|
||||
u32 pin;
|
||||
|
||||
pin = 0x1F000001;
|
||||
writel(pin, &pio->pioa.idr);
|
||||
writel(pin, &pio->pioa.pudr);
|
||||
writel(pin, &pio->pioa.per);
|
||||
writel(pin, &pio->pioa.oer);
|
||||
writel(pin, &pio->pioa.sodr);
|
||||
writel((1 << 25), &pio->pioa.codr);
|
||||
|
||||
pin = 0x1F000100;
|
||||
writel(pin, &pio->piob.idr);
|
||||
writel(pin, &pio->piob.pudr);
|
||||
writel(pin, &pio->piob.per);
|
||||
writel(pin, &pio->piob.oer);
|
||||
writel(pin, &pio->piob.codr);
|
||||
writel((1 << 24), &pio->piob.sodr);
|
||||
|
||||
pin = 0x40000000; /* Pullup DRxD enbable */
|
||||
writel(pin, &pio->pioc.puer);
|
||||
|
||||
pin = 0x0000000F; /* HWversion als Input */
|
||||
writel(pin, &pio->piod.idr);
|
||||
writel(pin, &pio->piod.puer);
|
||||
writel(pin, &pio->piod.per);
|
||||
writel(pin, &pio->piod.odr);
|
||||
writel(pin, &pio->piod.owdr);
|
||||
|
||||
gd->bd->bi_arch_number = MACH_TYPE_VL_MA2SC;
|
||||
/* adress of boot parameters */
|
||||
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
||||
|
||||
writel(CONFIG_SYS_SMC0_MODE0_VAL, &smc->cs[0].setup);
|
||||
writel(CONFIG_SYS_SMC0_CYCLE0_VAL, &smc->cs[0].cycle);
|
||||
writel(CONFIG_SYS_SMC0_PULSE0_VAL, &smc->cs[0].pulse);
|
||||
writel(CONFIG_SYS_SMC0_SETUP0_VAL, &smc->cs[0].setup);
|
||||
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
vl_ma2sc_nand_hw_init();
|
||||
#endif
|
||||
#ifdef CONFIG_MACB
|
||||
vl_ma2sc_macb_hw_init();
|
||||
#endif
|
||||
#ifdef CONFIG_USB_OHCI_NEW
|
||||
at91_uhp_hw_init();
|
||||
#endif
|
||||
#ifdef CONFIG_LCD
|
||||
vl_ma2sc_lcd_hw_init();
|
||||
#endif
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_MISC_INIT_R
|
||||
int misc_init_r(void)
|
||||
{
|
||||
uchar buffer[8];
|
||||
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
|
||||
u32 pin;
|
||||
|
||||
buffer[0] = 0x04;
|
||||
buffer[1] = 0x00;
|
||||
if (i2c_write(0x68, 0x0E, 1, buffer, 2) != 0)
|
||||
puts("error reseting rtc clock\n\0");
|
||||
|
||||
/* read hardware version */
|
||||
|
||||
pin = (readl(&pio->piod.pdsr) & 0x0F) + 0x44;
|
||||
printf("Board: revision %c\n", pin);
|
||||
buffer[0] = pin;
|
||||
buffer[1] = 0;
|
||||
setenv("revision", (char *) buffer);
|
||||
|
||||
pin = 0x40000000; /* Pullup DRxD enbable */
|
||||
writel(pin, &pio->pioc.puer);
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
int dram_init(void)
|
||||
{
|
||||
gd->ram_size = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE,
|
||||
CONFIG_SYS_SDRAM_SIZE);
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_RESET_PHY_R
|
||||
void reset_phy(void)
|
||||
{
|
||||
#ifdef CONFIG_MACB
|
||||
/*
|
||||
* Initialize ethernet HW addr prior to starting Linux,
|
||||
* needed for nfsroot
|
||||
*/
|
||||
eth_init();
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
|
||||
int board_eth_init(bd_t *bis)
|
||||
{
|
||||
int rc = 0;
|
||||
#ifdef CONFIG_MACB
|
||||
rc = macb_eth_initialize(0, (void *) ATMEL_BASE_EMAC, 0x01);
|
||||
#endif
|
||||
return rc;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_SYS_I2C_SOFT
|
||||
void i2c_init_board(void)
|
||||
{
|
||||
u32 pin;
|
||||
|
||||
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
||||
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
|
||||
u8 sda = (1<<4);
|
||||
u8 scl = (1<<5);
|
||||
|
||||
writel(1 << ATMEL_ID_PIOB, &pmc->pcer);
|
||||
pin = sda | scl;
|
||||
writel(pin, &pio->piob.idr); /* Disable Interupt */
|
||||
writel(pin, &pio->piob.pudr);
|
||||
writel(pin, &pio->piob.per);
|
||||
writel(pin, &pio->piob.oer);
|
||||
writel(pin, &pio->piob.sodr);
|
||||
}
|
||||
#endif
|
||||
|
||||
void watchdog_reset(void)
|
||||
{
|
||||
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
|
||||
u32 pin = 0x1; /* PA0 */
|
||||
|
||||
if ((readl(&pio->pioa.odsr) & pin) > 0)
|
||||
writel(pin, &pio->pioa.codr);
|
||||
else
|
||||
writel(pin, &pio->pioa.sodr);
|
||||
}
|
||||
|
||||
void enable_caches(void)
|
||||
{
|
||||
#ifndef CONFIG_SYS_DCACHE_OFF
|
||||
dcache_enable();
|
||||
#endif
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
||||
int do_ledtest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
||||
{
|
||||
int rcode = 1;
|
||||
int row;
|
||||
int col;
|
||||
u32 pinz;
|
||||
u32 pins;
|
||||
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
|
||||
|
||||
at91_set_pio_output(AT91_PIO_PORTB, 8, 0); /* LCD DIM */
|
||||
|
||||
pins = 0x1F000000;
|
||||
writel(pins, &pio->pioa.idr);
|
||||
writel(pins, &pio->pioa.pudr);
|
||||
writel(pins, &pio->pioa.per);
|
||||
writel(pins, &pio->pioa.oer);
|
||||
writel(pins, &pio->pioa.sodr);
|
||||
|
||||
pinz = 0x1F000000;
|
||||
writel(pinz, &pio->piob.idr);
|
||||
writel(pinz, &pio->piob.pudr);
|
||||
writel(pinz, &pio->piob.per);
|
||||
writel(pinz, &pio->piob.oer);
|
||||
writel(pinz, &pio->piob.sodr);
|
||||
|
||||
for (row = 0; row < 5; row++) {
|
||||
for (col = 0; col < 5; col++) {
|
||||
writel((0x01000000 << col), &pio->piob.sodr);
|
||||
writel((0x01000000 << row), &pio->pioa.codr);
|
||||
printf("LED Test %d x %d\n", row, col);
|
||||
udelay(1000000);
|
||||
writel(pinz, &pio->piob.codr);
|
||||
writel(pins, &pio->pioa.sodr);
|
||||
}
|
||||
}
|
||||
return rcode;
|
||||
}
|
||||
|
||||
void poweroff(void)
|
||||
{
|
||||
watchdog_reset();
|
||||
at91_set_pio_output(AT91_PIO_PORTA, 13, 1); /* CAN_TX -> H */
|
||||
udelay(100);
|
||||
at91_set_pio_output(AT91_PIO_PORTA, 12, 0); /* CAN_STB -> L */
|
||||
udelay(100);
|
||||
at91_set_pio_output(AT91_PIO_PORTA, 11, 0); /* CAN_EN -> L */
|
||||
udelay(100);
|
||||
while (1)
|
||||
watchdog_reset();
|
||||
}
|
||||
|
||||
int do_poweroff(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
||||
{
|
||||
int rcode = 1;
|
||||
poweroff();
|
||||
return rcode;
|
||||
}
|
||||
|
||||
int do_beep(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
||||
{
|
||||
int i;
|
||||
u32 freq;
|
||||
u32 durate;
|
||||
int rcode = 1;
|
||||
|
||||
freq = 1000;
|
||||
durate = 2;
|
||||
switch (argc) {
|
||||
case 3:
|
||||
durate = simple_strtoul(argv[2], NULL, 10);
|
||||
case 2:
|
||||
freq = simple_strtoul(argv[1], NULL, 10);
|
||||
case 1:
|
||||
break;
|
||||
default:
|
||||
cmd_usage(cmdtp);
|
||||
rcode = 1;
|
||||
break;
|
||||
}
|
||||
durate = durate * freq;
|
||||
freq = 500000 / freq;
|
||||
for (i = 0; i < durate; i++) {
|
||||
at91_set_pio_output(AT91_PIO_PORTB, 29, 1); /* Sound On*/
|
||||
udelay(freq);
|
||||
at91_set_pio_output(AT91_PIO_PORTB, 29, 0); /* Sound Off*/
|
||||
udelay(freq);
|
||||
}
|
||||
at91_set_pio_output(AT91_PIO_PORTB, 29, 0); /* Sound Off*/
|
||||
return rcode;
|
||||
}
|
||||
|
||||
int do_keytest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
||||
{
|
||||
int rcode = 1;
|
||||
int row;
|
||||
u32 col;
|
||||
u32 pinz;
|
||||
u32 pins;
|
||||
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
|
||||
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
||||
|
||||
writel((1 << ATMEL_ID_PIOA), &pmc->pcer);
|
||||
|
||||
pins = 0x001F0000;
|
||||
writel(pins, &pio->pioa.idr);
|
||||
writel(pins, &pio->pioa.pudr);
|
||||
writel(pins, &pio->pioa.per);
|
||||
writel(pins, &pio->pioa.odr);
|
||||
|
||||
pinz = 0x000F0000;
|
||||
writel(pinz, &pio->piob.idr);
|
||||
writel(pinz, &pio->piob.pudr);
|
||||
writel(pinz, &pio->piob.per);
|
||||
writel(pinz, &pio->piob.oer);
|
||||
writel(pinz, &pio->piob.codr);
|
||||
|
||||
while (1) {
|
||||
col = 0;
|
||||
for (row = 0; row < 4; row++) {
|
||||
writel((0x00010000 << row), &pio->piob.sodr);
|
||||
udelay(10000);
|
||||
col <<= 4;
|
||||
col |= ((readl(&pio->pioa.pdsr) >> 16) & 0xF) ^ 0xF ;
|
||||
writel(pinz, &pio->piob.codr);
|
||||
}
|
||||
printf("Matix: ");
|
||||
for (row = 0; row < 16; row++) {
|
||||
printf("%1.1d", col & 1);
|
||||
col >>= 1;
|
||||
}
|
||||
printf(" SP %d\r ",
|
||||
1 ^ (1 & (readl(&pio->piob.pdsr) >> 20)));
|
||||
if ((1 & (readl(&pio->pioa.pdsr) >> 1)) == 0) {
|
||||
/* SHUTDOWN */
|
||||
row = 0;
|
||||
while (row < 1000) {
|
||||
if ((1 & (readl(&pio->pioa.pdsr) >> 1)) == 0)
|
||||
row++;
|
||||
udelay(100);
|
||||
}
|
||||
udelay(100000);
|
||||
row = 0;
|
||||
while (row < 1000) {
|
||||
if ((1 & (readl(&pio->pioa.pdsr) >> 1)) > 0) {
|
||||
row++;
|
||||
udelay(1000);
|
||||
}
|
||||
}
|
||||
poweroff();
|
||||
while (1)
|
||||
;
|
||||
}
|
||||
}
|
||||
return rcode;
|
||||
}
|
||||
|
||||
/*****************************************************************************/
|
||||
|
||||
U_BOOT_CMD(
|
||||
ledtest, 1, 0, do_ledtest,
|
||||
"test ledmatrix",
|
||||
"\n"
|
||||
);
|
||||
|
||||
U_BOOT_CMD(
|
||||
keytest, 1, 0, do_keytest,
|
||||
"test keymatix and special keys, poweroff on pressing ON key",
|
||||
"\n"
|
||||
);
|
||||
|
||||
U_BOOT_CMD(
|
||||
poweroff, 1, 0, do_poweroff,
|
||||
"power off",
|
||||
"\n"
|
||||
);
|
||||
|
||||
U_BOOT_CMD(
|
||||
beep, 3, 0, do_beep,
|
||||
"[freq [duration]]",
|
||||
"freq frequence of beep\nduration duration of beep\n"
|
||||
);
|
||||
|
||||
/*****************************************************************************/
|
||||
|
|
@ -1,9 +0,0 @@
|
|||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_TARGET_VL_MA2SC=y
|
||||
# CONFIG_CMD_BDI is not set
|
||||
# CONFIG_CMD_IMI is not set
|
||||
# CONFIG_CMD_LOADS is not set
|
||||
# CONFIG_CMD_FPGA is not set
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_SYS_PROMPT="U-Boot> "
|
||||
|
|
@ -1,9 +0,0 @@
|
|||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_TARGET_VL_MA2SC=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="RAMLOAD"
|
||||
# CONFIG_CMD_BDI is not set
|
||||
# CONFIG_CMD_IMI is not set
|
||||
# CONFIG_CMD_LOADS is not set
|
||||
# CONFIG_CMD_FPGA is not set
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
|
|
@ -1,429 +0,0 @@
|
|||
/*
|
||||
* (C) Copyright 2009-2012
|
||||
* Jens Scharsig <esw@bus-elekronik.de>
|
||||
* BuS Elektronik GmbH & Co. KG
|
||||
*
|
||||
* Configuation settings for the VL_MA2SC board.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/*--------------------------------------------------------------------------*/
|
||||
|
||||
#define CONFIG_AT91SAM9263 /* It's an Atmel AT91SAM9263 SoC*/
|
||||
#define CONFIG_VL_MA2SC /* on an VL_MA2SC Board */
|
||||
#define CONFIG_ARCH_CPU_INIT
|
||||
#define CONFIG_MISC_INIT_R
|
||||
|
||||
#include <asm/hardware.h>
|
||||
|
||||
#define MACH_TYPE_VL_MA2SC 2412
|
||||
#define CONFIG_MACH_TYPE MACH_TYPE_VL_MA2SC
|
||||
|
||||
#define CONFIG_SYS_DCACHE_OFF
|
||||
|
||||
#ifdef CONFIG_RAMLOAD
|
||||
#define CONFIG_SYS_TEXT_BASE 0x21000000
|
||||
#else
|
||||
#define CONFIG_SYS_TEXT_BASE 0x00000000
|
||||
#endif
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
|
||||
|
||||
#define CONFIG_IDENT_STRING " on MiS Activ 2"
|
||||
#define CONFIG_VERSION_VARIABLE
|
||||
#define CONFIG_AT91_GPIO
|
||||
|
||||
#if !defined(CONFIG_SYS_USE_NANDFLASH) && !defined(CONFIG_RAMLOAD)
|
||||
#define CONFIG_SYS_USE_NORFLASH
|
||||
#define CONFIG_SYS_USE_BOOT_NORFLASH
|
||||
#endif
|
||||
|
||||
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
||||
#define CONFIG_SETUP_MEMORY_TAGS
|
||||
#define CONFIG_INITRD_TAG
|
||||
|
||||
#ifndef CONFIG_SYS_USE_BOOT_NORFLASH
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Hardware drivers
|
||||
*/
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F
|
||||
|
||||
#define CONFIG_WATCHDOG
|
||||
|
||||
#define CONFIG_ATMEL_USART
|
||||
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
|
||||
#define CONFIG_USART_ID ATMEL_ID_SYS
|
||||
|
||||
/* LCD */
|
||||
#define CONFIG_LCD
|
||||
#define CONFIG_ATMEL_LCD
|
||||
#define CONFIG_SPLASH_SCREEN
|
||||
#define CONFIG_SYS_BLACK_ON_WHITE
|
||||
#define LCD_BPP LCD_COLOR8
|
||||
#define CONFIG_ATMEL_LCD_BGR555
|
||||
|
||||
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
||||
#define CONFIG_BOOTDELAY 3
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#define CONFIG_CMD_BMP
|
||||
#define CONFIG_CMD_DATE
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_I2C
|
||||
#define CONFIG_CMD_NAND
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_MD5SUM
|
||||
#define CONFIG_CMD_SHA1SUM
|
||||
/*
|
||||
#define CONFIG_CMD_SPI
|
||||
*/
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_CMD_USB
|
||||
|
||||
#define CONFIG_SYS_LONGHELP
|
||||
#define CONFIG_MD5
|
||||
#define CONFIG_SHA1
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Hardware confuguration
|
||||
*---------------------------------------------------------------------------*/
|
||||
|
||||
/* USB */
|
||||
#define CONFIG_USB_ATMEL
|
||||
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
|
||||
#define CONFIG_USB_OHCI_NEW
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#define CONFIG_SYS_USB_OHCI_CPU_INIT
|
||||
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* UHP_BASE */
|
||||
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
|
||||
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
|
||||
#define CONFIG_USB_STORAGE
|
||||
#define CONFIG_AT91C_PQFP_UHPBUG
|
||||
|
||||
/* I2C-Bus */
|
||||
|
||||
#define CONFIG_SYS_I2C_SPEED 50000
|
||||
#define CONFIG_SYS_I2C_SLAVE 0 /* not used */
|
||||
|
||||
#ifndef CONFIG_HARD_I2C
|
||||
#define CONFIG_SYS_I2C
|
||||
#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
|
||||
#define CONFIG_SYS_I2C_SOFT_SPEED CONFIG_SYS_I2C_SPEED
|
||||
#define CONFIG_SYS_I2C_SOFT_SLAVE CONFIG_SYS_I2C_SLAVE
|
||||
|
||||
/* Software I2C driver configuration */
|
||||
#define I2C_DELAY udelay(2500000/CONFIG_SYS_I2C_SPEED)
|
||||
|
||||
#define AT91_PIN_SDA (1<<4) /* AT91C_PIO_PB4 */
|
||||
#define AT91_PIN_SCL (1<<5) /* AT91C_PIO_PB5 */
|
||||
|
||||
#define I2C_INIT i2c_init_board();
|
||||
#define I2C_ACTIVE writel(AT91_PIN_SDA, &pio->piob.mddr);
|
||||
#define I2C_TRISTATE writel(AT91_PIN_SDA, &pio->piob.mder);
|
||||
#define I2C_READ ((readl(&pio->piob.pdsr) & AT91_PIN_SDA) != 0)
|
||||
#define I2C_SDA(bit) \
|
||||
do { \
|
||||
if (bit) \
|
||||
writel(AT91_PIN_SDA, &pio->piob.sodr); \
|
||||
else \
|
||||
writel(AT91_PIN_SDA, &pio->piob.codr); \
|
||||
} while (0);
|
||||
#define I2C_SCL(bit) \
|
||||
do { \
|
||||
if (bit) \
|
||||
writel(AT91_PIN_SCL, &pio->piob.sodr); \
|
||||
else \
|
||||
writel(AT91_PIN_SCL, &pio->piob.codr); \
|
||||
} while (0);
|
||||
#endif
|
||||
|
||||
/* I2C-RTC */
|
||||
|
||||
#ifdef CONFIG_CMD_DATE
|
||||
#define CONFIG_RTC_DS1338
|
||||
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
||||
#endif
|
||||
|
||||
/* EEPROM */
|
||||
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
|
||||
|
||||
/* define PDC[31:16] as DATA[31:16] */
|
||||
#define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000
|
||||
#define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000
|
||||
|
||||
/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
|
||||
#define CONFIG_SYS_MATRIX_EBI0CSA_VAL \
|
||||
(AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V | \
|
||||
AT91_MATRIX_CSA_EBI_CS1A)
|
||||
|
||||
/* user reset enable */
|
||||
#define CONFIG_SYS_RSTC_RMR_VAL \
|
||||
(AT91_RSTC_KEY | \
|
||||
AT91_RSTC_MR_URSTEN | \
|
||||
AT91_RSTC_MR_ERSTL(15))
|
||||
|
||||
/* Disable Watchdog */
|
||||
#define CONFIG_SYS_WDTC_WDMR_VAL \
|
||||
(AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \
|
||||
AT91_WDT_MR_WDV(0xFFF) | \
|
||||
AT91_WDT_MR_WDDIS | \
|
||||
AT91_WDT_MR_WDD(0xFFF))
|
||||
|
||||
/* clocks */
|
||||
|
||||
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock */
|
||||
|
||||
#define MHZ180
|
||||
#if defined(MHZ199)
|
||||
/* 199,8994 MHZ */
|
||||
#define MASTER_PLL_MUL 911
|
||||
#define MASTER_PLL_DIV 56
|
||||
#define MASTER_PLL_OUT 2
|
||||
#elif defined(MHZ180)
|
||||
/* 180 MHZ */
|
||||
#define MASTER_PLL_MUL 1875
|
||||
#define MASTER_PLL_DIV 128
|
||||
#define MASTER_PLL_OUT 2
|
||||
#elif defined(MHZTEST)
|
||||
/* Test MHZ */
|
||||
#define CONFIG_DISPLAY_CPUINFO
|
||||
#define MASTER_PLL_MUL 8
|
||||
#define MASTER_PLL_DIV 1
|
||||
#define MASTER_PLL_OUT 2
|
||||
#else
|
||||
/* 176.9472 MHZ */
|
||||
#define MASTER_PLL_MUL 72
|
||||
#define MASTER_PLL_DIV 5
|
||||
#define MASTER_PLL_OUT 2
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_MOR_VAL \
|
||||
(AT91_PMC_MOR_MOSCEN | AT91_PMC_MOR_OSCOUNT(255))
|
||||
|
||||
#define CONFIG_SYS_PLLAR_VAL \
|
||||
(AT91_PMC_PLLAR_29 | \
|
||||
AT91_PMC_PLLXR_OUT(MASTER_PLL_OUT) | \
|
||||
AT91_PMC_PLLXR_PLLCOUNT(63) | \
|
||||
AT91_PMC_PLLXR_MUL(MASTER_PLL_MUL - 1) | \
|
||||
AT91_PMC_PLLXR_DIV(MASTER_PLL_DIV))
|
||||
|
||||
/* PCK/2 = MCK Master Clock from PLLA */
|
||||
#define CONFIG_SYS_MCKR1_VAL \
|
||||
(AT91_PMC_MCKR_CSS_SLOW | AT91_PMC_MCKR_PRES_1 | \
|
||||
AT91_PMC_MCKR_MDIV_2)
|
||||
|
||||
/* PCK/2 = MCK Master Clock from PLLA */
|
||||
#define CONFIG_SYS_MCKR2_VAL \
|
||||
(AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 | \
|
||||
AT91_PMC_MCKR_MDIV_2)
|
||||
|
||||
/* SDRAM */
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
#define CONFIG_SYS_SDRAM_BASE 0x20000000
|
||||
#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */
|
||||
#define CONFIG_SYS_INIT_SP_ADDR 0x00504000 /* use internal SRAM0 */
|
||||
|
||||
#define CONFIG_SYS_SDRC_MR_VAL1 0
|
||||
#define CONFIG_SYS_SDRC_TR_VAL1 700
|
||||
#define CONFIG_SYS_SDRC_CR_VAL \
|
||||
(AT91_SDRAMC_NC_9 | \
|
||||
AT91_SDRAMC_NR_13 | \
|
||||
AT91_SDRAMC_NB_4 | \
|
||||
AT91_SDRAMC_CAS_3 | \
|
||||
AT91_SDRAMC_DBW_32 | \
|
||||
(2 << 8) | /* Write Recovery Delay */ \
|
||||
(7 << 12) | /* Row Cycle Delay */ \
|
||||
(2 << 16) | /* Row Precharge Delay */ \
|
||||
(2 << 20) | /* Row to Column Delay */ \
|
||||
(5 << 24) | /* Active to Precharge Delay */ \
|
||||
(8 << 28)) /* Exit Self Refresh to Active Delay */
|
||||
|
||||
#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM
|
||||
#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE
|
||||
#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */
|
||||
#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH
|
||||
#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */
|
||||
#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */
|
||||
#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */
|
||||
#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */
|
||||
#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */
|
||||
#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */
|
||||
#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */
|
||||
#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */
|
||||
#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR
|
||||
#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */
|
||||
#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL
|
||||
#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */
|
||||
#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */
|
||||
#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */
|
||||
|
||||
/* NOR flash */
|
||||
|
||||
#define CONFIG_FLASH_SHOW_PROGRESS 45
|
||||
#define CONFIG_SYS_FLASH_CFI
|
||||
#define CONFIG_FLASH_CFI_DRIVER
|
||||
#define PHYS_FLASH_1 0x10000000
|
||||
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 256
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
||||
|
||||
#define CONFIG_ENV_IS_IN_FLASH
|
||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00060000)
|
||||
|
||||
/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
|
||||
#define CONFIG_SYS_SMC0_SETUP0_VAL \
|
||||
(AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \
|
||||
AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10))
|
||||
#define CONFIG_SYS_SMC0_PULSE0_VAL \
|
||||
(AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \
|
||||
AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11))
|
||||
#define CONFIG_SYS_SMC0_CYCLE0_VAL \
|
||||
(AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22))
|
||||
#define CONFIG_SYS_SMC0_MODE0_VAL \
|
||||
(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \
|
||||
AT91_SMC_MODE_DBW_16 | \
|
||||
AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(6))
|
||||
|
||||
/* NAND flash */
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
#define CONFIG_NAND_ATMEL
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
#define CONFIG_SYS_NAND_BASE 0x40000000
|
||||
#define CONFIG_SYS_NAND_DBW_8 1
|
||||
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* our ALE is AD21 */
|
||||
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) /* our CLE is AD22 */
|
||||
#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15)
|
||||
#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PB(0)
|
||||
#endif
|
||||
|
||||
/* Ethernet */
|
||||
#define CONFIG_MACB
|
||||
#define CONFIG_RMII
|
||||
#define CONFIG_NET_RETRY_COUNT 5
|
||||
#define CONFIG_AT91_WANTS_COMMON_PHY
|
||||
|
||||
#define CONFIG_OVERWRITE_ETHADDR_ONCE
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
||||
#define CONFIG_SYS_MEMTEST_END 0x21e00000
|
||||
|
||||
/* Address and size of Primary Environment Sector */
|
||||
#ifdef CONFIG_ENV_IS_IN_FLASH
|
||||
#define CONFIG_ENV_SIZE 0x20000
|
||||
#else
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
#endif
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE {312500, 230400, 115200, 19200, \
|
||||
38400, 57600, 9600 }
|
||||
|
||||
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
|
||||
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
|
||||
#define CONFIG_SYS_PBSIZE \
|
||||
(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CONFIG_CMDLINE_EDITING
|
||||
#define CONFIG_AUTO_COMPLETE
|
||||
|
||||
/*
|
||||
* Size of malloc() pool
|
||||
*/
|
||||
#define CONFIG_SYS_MALLOC_LEN \
|
||||
ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
|
||||
|
||||
#ifndef CONFIG_RAMLOAD
|
||||
#define CONFIG_BOOTCOMMAND "run nfsboot"
|
||||
#endif
|
||||
#define CONFIG_BOOT_RETRY_TIME -1
|
||||
#define CONFIG_BOOT_RETRY_MIN 15
|
||||
|
||||
#define CONFIG_NFSBOOTCOMMAND \
|
||||
"dhcp $(copy_addr) $(kernelname);" \
|
||||
"run bootargsdefaults;" \
|
||||
"set bootargs $(bootargs) boot=nfs " \
|
||||
";echo $(bootargs)" \
|
||||
";bootm"
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"ubootaddr=10000000\0" \
|
||||
"splashimage=10080000\0" \
|
||||
"kerneladdr=100A0000\0" \
|
||||
"kernelsize=00800000\0" \
|
||||
"minifsaddr=108A0000\0" \
|
||||
"minifssize=00060000\0" \
|
||||
"rootfsaddr=10900000\0" \
|
||||
"copy_addr=20200000\0" \
|
||||
"rootfssize=01700000\0" \
|
||||
"kernelname=uImage_vl_ma2sc\0" \
|
||||
"bootargsdefaults=set bootargs " \
|
||||
"console=ttyS0,115200 " \
|
||||
"video=atmel_lcdfb " \
|
||||
"mem=62M " \
|
||||
"panic=10 " \
|
||||
"boardrevison=\\\"${revision}\\\" " \
|
||||
"uboot=\\\"${ver}\\\" " \
|
||||
"\0" \
|
||||
"update_all=run update_kernel;run update_root;" \
|
||||
"run update_splash; run update_uboot\0" \
|
||||
"update_kernel=protect off $(kerneladdr) +$(kernelsize);" \
|
||||
"dhcp $(copy_addr) $(kernelname);" \
|
||||
"erase $(kerneladdr) +$(kernelsize);" \
|
||||
"cp.b $(fileaddr) $(kerneladdr) $(filesize);" \
|
||||
"protect on $(kerneladdr) +$(kernelsize)" \
|
||||
"\0" \
|
||||
"update_root=protect off $(rootfsaddr) +$(rootfssize);" \
|
||||
"dhcp $(copy_addr) vl_ma2sc.root;" \
|
||||
"erase $(rootfsaddr) +$(rootfssize);" \
|
||||
"cp.b $(fileaddr) $(rootfsaddr) $(filesize);" \
|
||||
"\0" \
|
||||
"update_splash=protect off $(splashimage) +20000;" \
|
||||
"dhcp $(copy_addr) splash_vl_ma2sc.bmp;" \
|
||||
"erase $(splashimage) +20000;" \
|
||||
"cp.b $(fileaddr) 10080000 $(filesize);" \
|
||||
"protect on $(splashimage) +20000\0" \
|
||||
"update_uboot=protect off 10000000 1005FFFF;" \
|
||||
"dhcp $(copy_addr) u-boot_vl_ma2sc;" \
|
||||
"erase 10000000 1005FFFF;" \
|
||||
"cp.b $(fileaddr) $(ubootaddr) $(filesize);" \
|
||||
"protect on 10000000 1005FFFF;reset\0" \
|
||||
"emergency=run bootargsdefaults;" \
|
||||
"set bootargs $(bootargs) root=initramfs boot=emergency " \
|
||||
";bootm $(kerneladdr)\0" \
|
||||
"netemergency=run bootargsdefaults;" \
|
||||
"dhcp $(copy_addr) $(kernelname);" \
|
||||
"set bootargs $(bootargs) root=initramfs boot=emergency " \
|
||||
";bootm $(copy_addr)\0" \
|
||||
"norboot=run bootargsdefaults;" \
|
||||
"set bootargs $(bootargs) root=initramfs boot=local quiet " \
|
||||
";bootm $(kerneladdr)\0" \
|
||||
"nandboot=run bootargsdefaults;" \
|
||||
"set bootargs $(bootargs) root=initramfs boot=nand " \
|
||||
";bootm $(kerneladdr)\0" \
|
||||
"setnorboot=set bootcmd 'run norboot'; set bootdelay 1;save\0" \
|
||||
"clearenv=protect off 10060000 1007FFFF;" \
|
||||
"erase 10060000 1007FFFF;reset\0" \
|
||||
" "
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue