imx: mx53loco: Convert to iomux-v3
There is no change of behavior. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
This commit is contained in:
parent
58f0764658
commit
721d0b0026
|
@ -24,11 +24,10 @@
|
|||
#include <common.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/imx-regs.h>
|
||||
#include <asm/arch/mx5x_pins.h>
|
||||
#include <asm/arch/sys_proto.h>
|
||||
#include <asm/arch/crm_regs.h>
|
||||
#include <asm/arch/clock.h>
|
||||
#include <asm/arch/iomux.h>
|
||||
#include <asm/arch/iomux-mx53.h>
|
||||
#include <asm/arch/clock.h>
|
||||
#include <asm/errno.h>
|
||||
#include <asm/imx-common/mx5_video.h>
|
||||
|
@ -82,86 +81,51 @@ u32 get_board_rev(void)
|
|||
return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
|
||||
}
|
||||
|
||||
#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
|
||||
PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
|
||||
|
||||
static void setup_iomux_uart(void)
|
||||
{
|
||||
/* UART1 RXD */
|
||||
mxc_request_iomux(MX53_PIN_CSI0_D11, IOMUX_CONFIG_ALT2);
|
||||
mxc_iomux_set_pad(MX53_PIN_CSI0_D11,
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
||||
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU |
|
||||
PAD_CTL_ODE_OPENDRAIN_ENABLE);
|
||||
mxc_iomux_set_input(MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, 0x1);
|
||||
static const iomux_v3_cfg_t uart_pads[] = {
|
||||
NEW_PAD_CTRL(MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, UART_PAD_CTRL),
|
||||
NEW_PAD_CTRL(MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, UART_PAD_CTRL),
|
||||
};
|
||||
|
||||
/* UART1 TXD */
|
||||
mxc_request_iomux(MX53_PIN_CSI0_D10, IOMUX_CONFIG_ALT2);
|
||||
mxc_iomux_set_pad(MX53_PIN_CSI0_D10,
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
||||
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU |
|
||||
PAD_CTL_ODE_OPENDRAIN_ENABLE);
|
||||
imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
|
||||
}
|
||||
|
||||
#ifdef CONFIG_USB_EHCI_MX5
|
||||
int board_ehci_hcd_init(int port)
|
||||
{
|
||||
/* request VBUS power enable pin, GPIO7_8 */
|
||||
mxc_request_iomux(MX53_PIN_ATA_DA_2, IOMUX_CONFIG_ALT1);
|
||||
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_ATA_DA_2), 1);
|
||||
imx_iomux_v3_setup_pad(MX53_PAD_PATA_DA_2__GPIO7_8);
|
||||
gpio_direction_output(IMX_GPIO_NR(7, 8), 1);
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
static void setup_iomux_fec(void)
|
||||
{
|
||||
/*FEC_MDIO*/
|
||||
mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT0);
|
||||
mxc_iomux_set_pad(MX53_PIN_FEC_MDIO,
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
||||
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
||||
PAD_CTL_22K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE);
|
||||
mxc_iomux_set_input(MX53_FEC_FEC_MDI_SELECT_INPUT, 0x1);
|
||||
static const iomux_v3_cfg_t fec_pads[] = {
|
||||
NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS |
|
||||
PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE),
|
||||
NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH),
|
||||
NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1,
|
||||
PAD_CTL_HYS | PAD_CTL_PKE),
|
||||
NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0,
|
||||
PAD_CTL_HYS | PAD_CTL_PKE),
|
||||
NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH),
|
||||
NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH),
|
||||
NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH),
|
||||
NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
|
||||
PAD_CTL_HYS | PAD_CTL_PKE),
|
||||
NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER,
|
||||
PAD_CTL_HYS | PAD_CTL_PKE),
|
||||
NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
|
||||
PAD_CTL_HYS | PAD_CTL_PKE),
|
||||
};
|
||||
|
||||
/*FEC_MDC*/
|
||||
mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT0);
|
||||
mxc_iomux_set_pad(MX53_PIN_FEC_MDC, PAD_CTL_DRV_HIGH);
|
||||
|
||||
/* FEC RXD1 */
|
||||
mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT0);
|
||||
mxc_iomux_set_pad(MX53_PIN_FEC_RXD1,
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
|
||||
|
||||
/* FEC RXD0 */
|
||||
mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT0);
|
||||
mxc_iomux_set_pad(MX53_PIN_FEC_RXD0,
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
|
||||
|
||||
/* FEC TXD1 */
|
||||
mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT0);
|
||||
mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, PAD_CTL_DRV_HIGH);
|
||||
|
||||
/* FEC TXD0 */
|
||||
mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT0);
|
||||
mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, PAD_CTL_DRV_HIGH);
|
||||
|
||||
/* FEC TX_EN */
|
||||
mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT0);
|
||||
mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, PAD_CTL_DRV_HIGH);
|
||||
|
||||
/* FEC TX_CLK */
|
||||
mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT0);
|
||||
mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK,
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
|
||||
|
||||
/* FEC RX_ER */
|
||||
mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT0);
|
||||
mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER,
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
|
||||
|
||||
/* FEC CRS */
|
||||
mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT0);
|
||||
mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV,
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
|
||||
imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
|
||||
}
|
||||
|
||||
#ifdef CONFIG_FSL_ESDHC
|
||||
|
@ -175,9 +139,9 @@ int board_mmc_getcd(struct mmc *mmc)
|
|||
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
|
||||
int ret;
|
||||
|
||||
mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1);
|
||||
imx_iomux_v3_setup_pad(MX53_PAD_EIM_DA11__GPIO3_11);
|
||||
gpio_direction_input(IMX_GPIO_NR(3, 11));
|
||||
mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
|
||||
imx_iomux_v3_setup_pad(MX53_PAD_EIM_DA13__GPIO3_13);
|
||||
gpio_direction_input(IMX_GPIO_NR(3, 13));
|
||||
|
||||
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
|
||||
|
@ -188,8 +152,38 @@ int board_mmc_getcd(struct mmc *mmc)
|
|||
return ret;
|
||||
}
|
||||
|
||||
#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
|
||||
PAD_CTL_PUS_100K_UP)
|
||||
#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
|
||||
PAD_CTL_DSE_HIGH)
|
||||
|
||||
int board_mmc_init(bd_t *bis)
|
||||
{
|
||||
static const iomux_v3_cfg_t sd1_pads[] = {
|
||||
NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
|
||||
NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL),
|
||||
NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
|
||||
NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
|
||||
NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
|
||||
NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
|
||||
MX53_PAD_EIM_DA13__GPIO3_13,
|
||||
};
|
||||
|
||||
static const iomux_v3_cfg_t sd2_pads[] = {
|
||||
NEW_PAD_CTRL(MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
|
||||
SD_CMD_PAD_CTRL),
|
||||
NEW_PAD_CTRL(MX53_PAD_PATA_IORDY__ESDHC3_CLK, SD_PAD_CTRL),
|
||||
NEW_PAD_CTRL(MX53_PAD_PATA_DATA8__ESDHC3_DAT0, SD_PAD_CTRL),
|
||||
NEW_PAD_CTRL(MX53_PAD_PATA_DATA9__ESDHC3_DAT1, SD_PAD_CTRL),
|
||||
NEW_PAD_CTRL(MX53_PAD_PATA_DATA10__ESDHC3_DAT2, SD_PAD_CTRL),
|
||||
NEW_PAD_CTRL(MX53_PAD_PATA_DATA11__ESDHC3_DAT3, SD_PAD_CTRL),
|
||||
NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__ESDHC3_DAT4, SD_PAD_CTRL),
|
||||
NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__ESDHC3_DAT5, SD_PAD_CTRL),
|
||||
NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__ESDHC3_DAT6, SD_PAD_CTRL),
|
||||
NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__ESDHC3_DAT7, SD_PAD_CTRL),
|
||||
MX53_PAD_EIM_DA11__GPIO3_11,
|
||||
};
|
||||
|
||||
u32 index;
|
||||
s32 status = 0;
|
||||
|
||||
|
@ -199,109 +193,12 @@ int board_mmc_init(bd_t *bis)
|
|||
for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
|
||||
switch (index) {
|
||||
case 0:
|
||||
mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_SD1_DATA0,
|
||||
IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_SD1_DATA1,
|
||||
IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_SD1_DATA2,
|
||||
IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_SD1_DATA3,
|
||||
IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_EIM_DA13,
|
||||
IOMUX_CONFIG_ALT1);
|
||||
|
||||
mxc_iomux_set_pad(MX53_PIN_SD1_CMD,
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
||||
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU);
|
||||
mxc_iomux_set_pad(MX53_PIN_SD1_CLK,
|
||||
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
|
||||
PAD_CTL_DRV_HIGH);
|
||||
mxc_iomux_set_pad(MX53_PIN_SD1_DATA0,
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
||||
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
||||
mxc_iomux_set_pad(MX53_PIN_SD1_DATA1,
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
||||
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
||||
mxc_iomux_set_pad(MX53_PIN_SD1_DATA2,
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
||||
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
||||
mxc_iomux_set_pad(MX53_PIN_SD1_DATA3,
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
||||
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
||||
imx_iomux_v3_setup_multiple_pads(sd1_pads,
|
||||
ARRAY_SIZE(sd1_pads));
|
||||
break;
|
||||
case 1:
|
||||
mxc_request_iomux(MX53_PIN_ATA_RESET_B,
|
||||
IOMUX_CONFIG_ALT2);
|
||||
mxc_request_iomux(MX53_PIN_ATA_IORDY,
|
||||
IOMUX_CONFIG_ALT2);
|
||||
mxc_request_iomux(MX53_PIN_ATA_DATA8,
|
||||
IOMUX_CONFIG_ALT4);
|
||||
mxc_request_iomux(MX53_PIN_ATA_DATA9,
|
||||
IOMUX_CONFIG_ALT4);
|
||||
mxc_request_iomux(MX53_PIN_ATA_DATA10,
|
||||
IOMUX_CONFIG_ALT4);
|
||||
mxc_request_iomux(MX53_PIN_ATA_DATA11,
|
||||
IOMUX_CONFIG_ALT4);
|
||||
mxc_request_iomux(MX53_PIN_ATA_DATA0,
|
||||
IOMUX_CONFIG_ALT4);
|
||||
mxc_request_iomux(MX53_PIN_ATA_DATA1,
|
||||
IOMUX_CONFIG_ALT4);
|
||||
mxc_request_iomux(MX53_PIN_ATA_DATA2,
|
||||
IOMUX_CONFIG_ALT4);
|
||||
mxc_request_iomux(MX53_PIN_ATA_DATA3,
|
||||
IOMUX_CONFIG_ALT4);
|
||||
mxc_request_iomux(MX53_PIN_EIM_DA11,
|
||||
IOMUX_CONFIG_ALT1);
|
||||
|
||||
mxc_iomux_set_pad(MX53_PIN_ATA_RESET_B,
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
||||
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU);
|
||||
mxc_iomux_set_pad(MX53_PIN_ATA_IORDY,
|
||||
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
|
||||
PAD_CTL_DRV_HIGH);
|
||||
mxc_iomux_set_pad(MX53_PIN_ATA_DATA8,
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
||||
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
||||
mxc_iomux_set_pad(MX53_PIN_ATA_DATA9,
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
||||
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
||||
mxc_iomux_set_pad(MX53_PIN_ATA_DATA10,
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
||||
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
||||
mxc_iomux_set_pad(MX53_PIN_ATA_DATA11,
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
||||
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
||||
mxc_iomux_set_pad(MX53_PIN_ATA_DATA0,
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
||||
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
||||
mxc_iomux_set_pad(MX53_PIN_ATA_DATA1,
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
||||
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
||||
mxc_iomux_set_pad(MX53_PIN_ATA_DATA2,
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
||||
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
||||
mxc_iomux_set_pad(MX53_PIN_ATA_DATA3,
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
|
||||
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
|
||||
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
|
||||
|
||||
imx_iomux_v3_setup_multiple_pads(sd2_pads,
|
||||
ARRAY_SIZE(sd2_pads));
|
||||
break;
|
||||
default:
|
||||
printf("Warning: you configured more ESDHC controller"
|
||||
|
@ -316,28 +213,17 @@ int board_mmc_init(bd_t *bis)
|
|||
}
|
||||
#endif
|
||||
|
||||
#define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
|
||||
PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
|
||||
|
||||
static void setup_iomux_i2c(void)
|
||||
{
|
||||
/* I2C1 SDA */
|
||||
mxc_request_iomux(MX53_PIN_CSI0_D8,
|
||||
IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION);
|
||||
mxc_iomux_set_input(MX53_I2C1_IPP_SDA_IN_SELECT_INPUT,
|
||||
INPUT_CTL_PATH0);
|
||||
mxc_iomux_set_pad(MX53_PIN_CSI0_D8,
|
||||
PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
|
||||
PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE |
|
||||
PAD_CTL_PUE_PULL |
|
||||
PAD_CTL_ODE_OPENDRAIN_ENABLE);
|
||||
/* I2C1 SCL */
|
||||
mxc_request_iomux(MX53_PIN_CSI0_D9,
|
||||
IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION);
|
||||
mxc_iomux_set_input(MX53_I2C1_IPP_SCL_IN_SELECT_INPUT,
|
||||
INPUT_CTL_PATH0);
|
||||
mxc_iomux_set_pad(MX53_PIN_CSI0_D9,
|
||||
PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
|
||||
PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE |
|
||||
PAD_CTL_PUE_PULL |
|
||||
PAD_CTL_ODE_OPENDRAIN_ENABLE);
|
||||
static const iomux_v3_cfg_t i2c1_pads[] = {
|
||||
NEW_PAD_CTRL(MX53_PAD_CSI0_DAT8__I2C1_SDA, I2C_PAD_CTRL),
|
||||
NEW_PAD_CTRL(MX53_PAD_CSI0_DAT9__I2C1_SCL, I2C_PAD_CTRL),
|
||||
};
|
||||
|
||||
imx_iomux_v3_setup_multiple_pads(i2c1_pads, ARRAY_SIZE(i2c1_pads));
|
||||
}
|
||||
|
||||
static int power_init(void)
|
||||
|
|
|
@ -24,7 +24,7 @@
|
|||
#include <common.h>
|
||||
#include <linux/list.h>
|
||||
#include <asm/gpio.h>
|
||||
#include <asm/arch/iomux.h>
|
||||
#include <asm/arch/iomux-mx53.h>
|
||||
#include <linux/fb.h>
|
||||
#include <ipu_pixfmt.h>
|
||||
|
||||
|
@ -63,42 +63,46 @@ static struct fb_videomode const seiko_wvga = {
|
|||
|
||||
void setup_iomux_lcd(void)
|
||||
{
|
||||
mxc_request_iomux(MX53_PIN_DI0_DISP_CLK, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DI0_PIN15, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DI0_PIN2, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DI0_PIN3, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DISP0_DAT0, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DISP0_DAT1, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DISP0_DAT2, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DISP0_DAT3, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DISP0_DAT4, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DISP0_DAT5, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DISP0_DAT6, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DISP0_DAT7, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DISP0_DAT8, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DISP0_DAT9, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DISP0_DAT10, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DISP0_DAT11, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DISP0_DAT12, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DISP0_DAT13, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DISP0_DAT14, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DISP0_DAT15, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DISP0_DAT16, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DISP0_DAT17, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DISP0_DAT18, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DISP0_DAT19, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DISP0_DAT20, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DISP0_DAT21, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DISP0_DAT22, IOMUX_CONFIG_ALT0);
|
||||
mxc_request_iomux(MX53_PIN_DISP0_DAT23, IOMUX_CONFIG_ALT0);
|
||||
static const iomux_v3_cfg_t lcd_pads[] = {
|
||||
MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK,
|
||||
MX53_PAD_DI0_PIN15__IPU_DI0_PIN15,
|
||||
MX53_PAD_DI0_PIN2__IPU_DI0_PIN2,
|
||||
MX53_PAD_DI0_PIN3__IPU_DI0_PIN3,
|
||||
MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0,
|
||||
MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1,
|
||||
MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2,
|
||||
MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3,
|
||||
MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4,
|
||||
MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5,
|
||||
MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6,
|
||||
MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7,
|
||||
MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8,
|
||||
MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9,
|
||||
MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10,
|
||||
MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11,
|
||||
MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12,
|
||||
MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13,
|
||||
MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14,
|
||||
MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15,
|
||||
MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16,
|
||||
MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17,
|
||||
MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18,
|
||||
MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19,
|
||||
MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20,
|
||||
MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21,
|
||||
MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22,
|
||||
MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23,
|
||||
};
|
||||
|
||||
imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
|
||||
|
||||
/* Turn on GPIO backlight */
|
||||
mxc_request_iomux(MX53_PIN_EIM_D24, IOMUX_CONFIG_ALT1);
|
||||
imx_iomux_v3_setup_pad(MX53_PAD_EIM_D24__GPIO3_24);
|
||||
gpio_direction_output(MX53LOCO_LCD_POWER, 1);
|
||||
|
||||
/* Turn on display contrast */
|
||||
mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1);
|
||||
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_1), 1);
|
||||
imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1);
|
||||
gpio_direction_output(IMX_GPIO_NR(1, 1), 1);
|
||||
}
|
||||
|
||||
int board_video_skip(void)
|
||||
|
|
Loading…
Reference in a new issue