Merge commit 'wd/master'

This commit is contained in:
Jon Loeliger 2008-02-14 14:07:21 -06:00
commit 746c4b9490
24 changed files with 52 additions and 56 deletions

1
.gitignore vendored
View file

@ -10,6 +10,7 @@
*.orig
*.a
*.o
*~
#
# Top-level generic files

View file

@ -312,13 +312,13 @@ $(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
-Map u-boot.map -o u-boot
$(OBJS): $(obj)include/autoconf.mk
$(OBJS): depend $(obj)include/autoconf.mk
$(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
$(LIBS): $(obj)include/autoconf.mk
$(LIBS): depend $(obj)include/autoconf.mk
$(MAKE) -C $(dir $(subst $(obj),,$@))
$(SUBDIRS): $(obj)include/autoconf.mk
$(SUBDIRS): depend $(obj)include/autoconf.mk
$(MAKE) -C $@ all
$(NAND_SPL): $(VERSION_FILE) $(obj)include/autoconf.mk

View file

@ -61,21 +61,21 @@ static struct stor_spec specs[ENUM_MAX] = { { 0, 0, 0, 0, "" }, };
void dev_stor_init(void)
{
#if (CONFIG_COMMANDS & CFG_CMD_IDE)
#if defined(CONFIG_CMD_IDE)
specs[ENUM_IDE].max_dev = CFG_IDE_MAXDEVICE;
specs[ENUM_IDE].enum_started = 0;
specs[ENUM_IDE].enum_ended = 0;
specs[ENUM_IDE].type = DEV_TYP_STOR | DT_STOR_IDE;
specs[ENUM_IDE].name = "ide";
#endif
#if (CONFIG_COMMANDS & CFG_CMD_USB)
#if defined(CONFIG_CMD_USB)
specs[ENUM_USB].max_dev = USB_MAX_STOR_DEV;
specs[ENUM_USB].enum_started = 0;
specs[ENUM_USB].enum_ended = 0;
specs[ENUM_USB].type = DEV_TYP_STOR | DT_STOR_USB;
specs[ENUM_USB].name = "usb";
#endif
#if (CONFIG_COMMANDS & CFG_CMD_SCSI)
#if defined(CONFIG_CMD_SCSI)
specs[ENUM_SCSI].max_dev = CFG_SCSI_MAX_DEVICE;
specs[ENUM_SCSI].enum_started = 0;
specs[ENUM_SCSI].enum_ended = 0;

View file

@ -132,7 +132,7 @@ uint mii_send(uint mii_cmd)
return (mii_reply & 0xffff); /* data read from phy */
}
#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */
#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
#if defined(CFG_DISCOVER_PHY)
int mii_discover_phy(struct eth_device *dev)

View file

@ -131,7 +131,7 @@ uint mii_send(uint mii_cmd)
return (mii_reply & 0xffff); /* data read from phy */
}
#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */
#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
#if defined(CFG_DISCOVER_PHY)
int mii_discover_phy(struct eth_device *dev)

View file

@ -131,7 +131,7 @@ uint mii_send(uint mii_cmd)
return (mii_reply & 0xffff); /* data read from phy */
}
#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */
#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
#if defined(CFG_DISCOVER_PHY)
int mii_discover_phy(struct eth_device *dev)

View file

@ -131,7 +131,7 @@ uint mii_send(uint mii_cmd)
return (mii_reply & 0xffff); /* data read from phy */
}
#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */
#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
#if defined(CFG_DISCOVER_PHY)
int mii_discover_phy(struct eth_device *dev)

View file

@ -131,7 +131,7 @@ uint mii_send(uint mii_cmd)
return (mii_reply & 0xffff); /* data read from phy */
}
#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */
#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
#if defined(CFG_DISCOVER_PHY)
int mii_discover_phy(struct eth_device *dev)

View file

@ -132,7 +132,7 @@ uint mii_send(uint mii_cmd)
return (mii_reply & 0xffff); /* data read from phy */
}
#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */
#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
#if defined(CFG_DISCOVER_PHY)
int mii_discover_phy(struct eth_device *dev)

View file

@ -415,7 +415,7 @@ void do_fixup_by_path(void *fdt, const char *path, const char *prop,
{
#if defined(DEBUG)
int i;
debug("Updating property '%s/%s' = ", node, prop);
debug("Updating property '%s/%s' = ", path, prop);
for (i = 0; i < len; i++)
debug(" %.2x", *(u8*)(val+i));
debug("\n");
@ -441,7 +441,7 @@ void do_fixup_by_prop(void *fdt,
int off;
#if defined(DEBUG)
int i;
debug("Updating property '%s/%s' = ", node, prop);
debug("Updating property '%s' = ", prop);
for (i = 0; i < len; i++)
debug(" %.2x", *(u8*)(val+i));
debug("\n");
@ -468,7 +468,7 @@ void do_fixup_by_compat(void *fdt, const char *compat,
int off = -1;
#if defined(DEBUG)
int i;
debug("Updating property '%s/%s' = ", node, prop);
debug("Updating property '%s' = ", prop);
for (i = 0; i < len; i++)
debug(" %.2x", *(u8*)(val+i));
debug("\n");

View file

@ -147,7 +147,10 @@ OBJCFLAGS += --gap-fill=0xff
gccincdir := $(shell $(CC) -print-file-name=include)
CPPFLAGS := $(DBGFLAGS) $(OPTFLAGS) $(RELFLAGS) \
-D__KERNEL__ -DTEXT_BASE=$(TEXT_BASE) \
-D__KERNEL__
ifneq ($(TEXT_BASE),)
CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
endif
ifneq ($(OBJTREE),$(SRCTREE))
CPPFLAGS += -I$(OBJTREE)/include2 -I$(OBJTREE)/include
@ -185,7 +188,10 @@ endif
AFLAGS := $(AFLAGS_DEBUG) -D__ASSEMBLY__ $(CPPFLAGS)
LDFLAGS += -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
LDFLAGS += -Bstatic -T $(LDSCRIPT) $(PLATFORM_LDFLAGS)
ifneq ($(TEXT_BASE),)
LDFLAGS += -Ttext $(TEXT_BASE)
endif
# Location of a usable BFD library, where we define "usable" as
# "built for ${HOST}, supports ${TARGET}". Sensible values are

View file

@ -18,8 +18,6 @@
#define omap_readw(x) *(volatile unsigned short *)(x)
#define omap_readl(x) *(volatile unsigned long *)(x)
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
#define OMAP_DIE_ID_0 0xfffe1800
#define OMAP_DIE_ID_1 0xfffe1804
#define OMAP_PRODUCTION_ID_0 0xfffe2000

View file

@ -304,7 +304,7 @@ AT91PS_DataFlash AT91F_DataflashSelect (AT91PS_DataFlash pFlash,
for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++)
if ( dataflash_info[i].id
&& ((((int) addr) & 0xFF000000) ==
&& ((((int) *addr) & 0xFF000000) ==
dataflash_info[i].logical_address)) {
addr_valid = 1;
break;

View file

@ -218,10 +218,6 @@ static const struct amd_flash_info jedec_table[] = {
#endif
};
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
static inline void fill_info(flash_info_t *info, const struct amd_flash_info *jedec_entry, ulong base)
{
int i,j;

View file

@ -165,7 +165,7 @@ void cs8900_get_enetaddr (uchar * addr)
addr[0], addr[1],
addr[2], addr[3],
addr[4], addr[5]) ;
debug ("### Set environment from HW MAC addr = \"%s\"\n", ethaddr);
debug ("### Set environment from HW MAC addr = \"%s\"\n", ethaddr);
setenv ("ethaddr", ethaddr);
}
@ -317,6 +317,6 @@ int cs8900_e2prom_write(unsigned char addr, unsigned short value)
return 0;
}
#endif /* COMMANDS & CFG_NET */
#endif /* CONFIG_CMD_NET */
#endif /* CONFIG_DRIVER_CS8900 */

View file

@ -36,12 +36,12 @@
* AUI/TP selection ( mine has 10Base2/10BaseT select )
*
* Arguments:
* io = for the base address
* io = for the base address
* irq = for the IRQ
*
* author:
* Erik Stahlman ( erik@vt.edu )
* Daris A Nevil ( dnevil@snmc.com )
* Erik Stahlman ( erik@vt.edu )
* Daris A Nevil ( dnevil@snmc.com )
*
*
* Hardware multicast code from Peter Cammaert ( pc@denkart.be )
@ -53,7 +53,7 @@
* o lan91c96.c (Intel Diagnostic Manager driver)
*
* History:
* 04/30/03 Mathijs Haarman Modified smc91111.c (u-boot version)
* 04/30/03 Mathijs Haarman Modified smc91111.c (u-boot version)
* for lan91c96
*---------------------------------------------------------------------------
*/
@ -296,8 +296,8 @@ static int poll4int (byte mask, int timeout)
/*
* Function: smc_reset( void )
* Purpose:
* This sets the SMC91111 chip to its normal state, hopefully from whatever
* mess that any other DOS driver has put it in.
* This sets the SMC91111 chip to its normal state, hopefully from whatever
* mess that any other DOS driver has put it in.
*
* Maybe I should reset more registers to defaults in here? SOFTRST should
* do that for me.
@ -397,7 +397,7 @@ static void smc_shutdown ()
* This sends the actual packet to the SMC9xxx chip.
*
* Algorithm:
* First, see if a saved_skb is available.
* First, see if a saved_skb is available.
* ( this should NOT be called if there is no 'saved_skb'
* Now, find the packet number that the chip allocated
* Point the data pointers at it in memory
@ -405,9 +405,9 @@ static void smc_shutdown ()
* Dump the packet to chip memory
* Check if a last byte is needed ( odd length packet )
* if so, set the control flag right
* Tell the card to send it
* Tell the card to send it
* Enable the transmit interrupt, so I know if it failed
* Free the kernel data if I actually sent it.
* Free the kernel data if I actually sent it.
*/
static int smc_send_packet (volatile void *packet, int packet_length)
{
@ -865,7 +865,7 @@ static int smc_hw_init ()
}
#endif /* 0 */
#endif /* COMMANDS & CFG_NET */
#endif /* CONFIG_CMD_NET */
/* smc_get_ethaddr (bd_t * bd)

View file

@ -29,7 +29,6 @@
#include "netarm_eth.h"
#include <asm/arch/netarm_registers.h>
#if defined(CONFIG_CMD_NET)
static int na_mii_poll_busy (void);
@ -56,7 +55,6 @@ static void na_get_mac_addr (void)
setenv ("ethaddr", ethaddr);
}
static void na_mii_write (int reg, int value)
{
int mii_addr;
@ -355,6 +353,6 @@ extern int eth_send (volatile void *packet, int length)
return 1;
}
#endif /* COMMANDS & CFG_NET */
#endif /* CONFIG_CMD_NET */
#endif /* CONFIG_DRIVER_NETARMETH */

View file

@ -36,16 +36,13 @@
#if defined(CONFIG_CMD_NET)
/* packet page register access functions */
static unsigned char get_reg (unsigned int regno)
{
return (*(unsigned char *) regno);
}
static void put_reg (unsigned int regno, unsigned char val)
{
*(volatile unsigned char *) regno = val;
@ -91,7 +88,6 @@ void rtl8019_get_enetaddr (uchar * addr)
put_reg (RTL8019_COMMAND, RTL8019_PAGE0);
}
void eth_halt (void)
{
put_reg (RTL8019_COMMAND, 0x01);
@ -134,7 +130,6 @@ int eth_init (bd_t * bd)
return 0;
}
static unsigned char nic_to_pc (void)
{
unsigned char rec_head_status;
@ -277,6 +272,6 @@ extern int eth_send (volatile void *packet, int length)
return 0;
}
#endif /* COMMANDS & CFG_NET */
#endif /* CONFIG_CMD_NET */
#endif /* CONFIG_DRIVER_RTL8019 */

View file

@ -352,8 +352,6 @@ int mdio_read(int RegAddr)
return value;
}
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
static int rtl8169_init_board(struct eth_device *dev)
{
int i;

View file

@ -142,7 +142,6 @@ void rtc_get (struct rtc_time *tmp)
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
}
/*
* Set the RTC
*/
@ -166,7 +165,6 @@ void rtc_set (struct rtc_time *tmp)
rtc_write (RTC_CTL1_REG_ADDR, RTC_CTL1_BIT_2412);
}
/*
* Reset the RTC. We setting the date back to 1970-01-01.
*/
@ -200,7 +198,6 @@ void rtc_reset (void)
return;
}
/*
* Helper functions
*/
@ -224,4 +221,4 @@ static unsigned char bin2bcd (unsigned int n)
return (((n / 10) << 4) | (n % 10));
}
#endif /* CONFIG_RTC_RX8025 && (CFG_COMMANDS & CFG_CMD_DATE) */
#endif /* CONFIG_RTC_RX8025 && CONFIG_CMD_DATE */

View file

@ -203,8 +203,8 @@ void init_cmd_timeout(void);
void reset_cmd_timeout(void);
/* lib_$(ARCH)/board.c */
void board_init_f (ulong);
void board_init_r (gd_t *, ulong);
void board_init_f (ulong) __attribute__ ((noreturn));
void board_init_r (gd_t *, ulong) __attribute__ ((noreturn));
int checkboard (void);
int checkflash (void);
int checkdram (void);
@ -665,4 +665,6 @@ void inline show_boot_progress (int val);
#error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
#endif
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
#endif /* __COMMON_H_ */

View file

@ -48,7 +48,7 @@
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif

View file

@ -140,7 +140,7 @@
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
/* #define CONFIG_INITRD_TAG 1 */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif

View file

@ -34,7 +34,8 @@
#if defined(CONFIG_CMD_NET) && defined(CONFIG_CMD_NFS)
#define HASHES_PER_LINE 65 /* Number of "loading" hashes per line */
#define NFS_TIMEOUT 60UL
#define NFS_RETRY_COUNT 30
#define NFS_TIMEOUT 2UL
static int fs_mounted = 0;
static unsigned long rpc_id = 0;
@ -586,6 +587,10 @@ Interfaces of U-BOOT
static void
NfsTimeout (void)
{
if ( NfsTimeoutCount++ < NFS_RETRY_COUNT ) {
NfsSend ();
return;
}
puts ("Timeout\n");
NetState = NETLOOP_FAIL;
return;