redonkable
/
remarkable-uboot
1
0
Fork 0
Code Releases Activity

misc: Add simple driver to enable the legacy UART on Winbond Super IO chips 

On most x86 boards, the legacy serial ports (io address 0x3f8/0x2f8)
are provided by a superio chip connected to the LPC bus. We must
program the superio chip so that serial ports are available for us.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
utp
Stefan Roese 2016-01-19 14:05:10 +01:00 committed by Bin Meng
parent 0a34a5fd27
commit 85056932f2
4 changed files with 85 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
drivers/misc/Kconfig
View File

@ -130,4 +130,12 @@ config RESET
effect a reset. The uclass will try all available drivers when
reset_walk() is called.
config WINBOND_W83627
bool "Enable Winbond Super I/O driver"
help
If you say Y here, you will get support for the Winbond
W83627 Super I/O driver. This can be used to enable the
legacy UART or other devices in the Winbond Super IO chips
on X86 platforms.
endmenu

1
drivers/misc/Makefile
View File

@ -41,3 +41,4 @@ obj-$(CONFIG_FSL_SEC_MON) += fsl_sec_mon.o
obj-$(CONFIG_PCA9551_LED) += pca9551_led.o
obj-$(CONFIG_RESET) += reset-uclass.o
obj-$(CONFIG_FSL_DEVICE_DISABLE) += fsl_devdis.o
obj-$(CONFIG_WINBOND_W83627) += winbond_w83627.o

41
drivers/misc/winbond_w83627.c 100644
View File

@ -0,0 +1,41 @@
/*
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/pnp_def.h>
#define WINBOND_ENTRY_KEY 0x87
#define WINBOND_EXIT_KEY 0xaa
/* Enable configuration: pass entry key '0x87' into index port dev twice */
static void pnp_enter_conf_state(u16 dev)
{
u16 port = dev >> 8;
outb(WINBOND_ENTRY_KEY, port);
outb(WINBOND_ENTRY_KEY, port);
}
/* Disable configuration: pass exit key '0xAA' into index port dev */
static void pnp_exit_conf_state(u16 dev)
{
u16 port = dev >> 8;
outb(WINBOND_EXIT_KEY, port);
}
/* Bring up early serial debugging output before the RAM is initialized */
void winbond_enable_serial(uint dev, uint iobase, uint irq)
{
pnp_enter_conf_state(dev);
pnp_set_logical_device(dev);
pnp_set_enable(dev, 0);
pnp_set_iobase(dev, PNP_IDX_IO0, iobase);
pnp_set_irq(dev, PNP_IDX_IRQ0, irq);
pnp_set_enable(dev, 1);
pnp_exit_conf_state(dev);
}

35
include/winbond_w83627.h 100644
View File

@ -0,0 +1,35 @@
/*
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _WINBOND_W83627_H_
#define _WINBOND_W83627_H_
/* I/O address of Winbond Super IO chip */
#define WINBOND_IO_PORT 0x2e
/* Logical device number */
#define W83627DHG_FDC 0 /* Floppy */
#define W83627DHG_PP 1 /* Parallel port */
#define W83627DHG_SP1 2 /* Com1 */
#define W83627DHG_SP2 3 /* Com2 */
#define W83627DHG_KBC 5 /* PS/2 keyboard & mouse */
#define W83627DHG_SPI 6 /* Serial peripheral interface */
#define W83627DHG_WDTO_PLED 8 /* WDTO#, PLED */
#define W83627DHG_ACPI 10 /* ACPI */
#define W83627DHG_HWM 11 /* Hardware monitor */
#define W83627DHG_PECI_SST 12 /* PECI, SST */
/**
* Configure the base I/O port of the specified serial device and enable the
* serial device.
*
* @dev: high 8 bits = super I/O port, low 8 bits = logical device number
* @iobase: processor I/O port address to assign to this serial device
* @irq: processor IRQ number to assign to this serial device
*/
void winbond_enable_serial(uint dev, uint iobase, uint irq);
#endif /* _WINBOND_W83627_H_ */