diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index fb535eb9ec..cb18908867 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -33,8 +33,19 @@ void save_omap_boot_params(void)
 	 * used. But it not correct to assume that romcode structure
 	 * encoding would be same as u-boot. So use the defined offsets.
 	 */
-	gd->arch.omap_boot_params.omap_bootdevice = boot_device =
-				   *((u8 *)(rom_params + BOOT_DEVICE_OFFSET));
+	boot_device = *((u8 *)(rom_params + BOOT_DEVICE_OFFSET));
+
+#if defined(BOOT_DEVICE_NAND_I2C)
+	/*
+	 * Re-map NAND&I2C boot-device to the "normal" NAND boot-device.
+	 * Otherwise the SPL boot IF can't handle this device correctly.
+	 * Somehow booting with Hynix 4GBit NAND H27U4G8 on Siemens
+	 * Draco leads to this boot-device passed to SPL from the BootROM.
+	 */
+	if (boot_device == BOOT_DEVICE_NAND_I2C)
+		boot_device = BOOT_DEVICE_NAND;
+#endif
+	gd->arch.omap_boot_params.omap_bootdevice = boot_device;
 
 	gd->arch.omap_boot_params.ch_flags =
 				*((u8 *)(rom_params + CH_FLAGS_OFFSET));
@@ -57,7 +68,7 @@ void save_omap_boot_params(void)
 		}
 	}
 
-#ifdef CONFIG_DRA7XX
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
 	/*
 	 * We get different values for QSPI_1 and QSPI_4 being used, but
 	 * don't actually care about this difference.  Rather than
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index c8e9bc86e5..e601ba1886 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -1226,13 +1226,14 @@ void dmm_init(u32 base)
 			emif1_enabled = 1;
 			emif2_enabled = 1;
 			break;
-		} else if (valid == 1) {
-			emif1_enabled = 1;
-		} else if (valid == 2) {
-			emif2_enabled = 1;
 		}
-	}
 
+		if (valid == 1)
+			emif1_enabled = 1;
+
+		if (valid == 2)
+			emif2_enabled = 1;
+	}
 }
 
 static void do_bug0039_workaround(u32 base)
diff --git a/arch/arm/cpu/armv7/omap5/Kconfig b/arch/arm/cpu/armv7/omap5/Kconfig
index 129982caca..aca862d2b2 100644
--- a/arch/arm/cpu/armv7/omap5/Kconfig
+++ b/arch/arm/cpu/armv7/omap5/Kconfig
@@ -12,6 +12,9 @@ config TARGET_OMAP5_UEVM
 config TARGET_DRA7XX_EVM
 	bool "TI DRA7XX"
 
+config TARGET_BEAGLE_X15
+	bool "BeagleBoard X15"
+
 endchoice
 
 config SYS_SOC
@@ -20,5 +23,6 @@ config SYS_SOC
 source "board/compulab/cm_t54/Kconfig"
 source "board/ti/omap5_uevm/Kconfig"
 source "board/ti/dra7xx/Kconfig"
+source "board/ti/beagle_x15/Kconfig"
 
 endif
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index 025738302a..95f16866e6 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -365,31 +365,31 @@ struct vcores_data dra752_volts = {
 	.mpu.value	= VDD_MPU_DRA752,
 	.mpu.efuse.reg	= STD_FUSE_OPP_VMIN_MPU_NOM,
 	.mpu.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
-	.mpu.addr	= TPS659038_REG_ADDR_SMPS12_MPU,
+	.mpu.addr	= TPS659038_REG_ADDR_SMPS12,
 	.mpu.pmic	= &tps659038,
 
 	.eve.value	= VDD_EVE_DRA752,
 	.eve.efuse.reg	= STD_FUSE_OPP_VMIN_DSPEVE_NOM,
 	.eve.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
-	.eve.addr	= TPS659038_REG_ADDR_SMPS45_EVE,
+	.eve.addr	= TPS659038_REG_ADDR_SMPS45,
 	.eve.pmic	= &tps659038,
 
 	.gpu.value	= VDD_GPU_DRA752,
 	.gpu.efuse.reg	= STD_FUSE_OPP_VMIN_GPU_NOM,
 	.gpu.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
-	.gpu.addr	= TPS659038_REG_ADDR_SMPS6_GPU,
+	.gpu.addr	= TPS659038_REG_ADDR_SMPS6,
 	.gpu.pmic	= &tps659038,
 
 	.core.value	= VDD_CORE_DRA752,
 	.core.efuse.reg	= STD_FUSE_OPP_VMIN_CORE_NOM,
 	.core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
-	.core.addr	= TPS659038_REG_ADDR_SMPS7_CORE,
+	.core.addr	= TPS659038_REG_ADDR_SMPS7,
 	.core.pmic	= &tps659038,
 
 	.iva.value	= VDD_IVA_DRA752,
 	.iva.efuse.reg	= STD_FUSE_OPP_VMIN_IVA_NOM,
 	.iva.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
-	.iva.addr	= TPS659038_REG_ADDR_SMPS8_IVA,
+	.iva.addr	= TPS659038_REG_ADDR_SMPS8,
 	.iva.pmic	= &tps659038,
 };
 
@@ -593,7 +593,7 @@ const struct ctrl_ioregs ioregs_dra72x_es1 = {
 	.ctrl_ddr_ctrl_ext_0 = 0xA2000000,
 };
 
-void hw_data_init(void)
+void __weak hw_data_init(void)
 {
 	u32 omap_rev = omap_revision();
 
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index ff08ef4247..0745d424e2 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -376,6 +376,7 @@ struct omap_sys_ctrl_regs const omap5_ctrl = {
 
 struct omap_sys_ctrl_regs const dra7xx_ctrl = {
 	.control_status				= 0x4A002134,
+	.control_phy_power_usb			= 0x4A002370,
 	.control_phy_power_sata			= 0x4A002374,
 	.control_core_mac_id_0_lo		= 0x4A002514,
 	.control_core_mac_id_0_hi		= 0x4A002518,
@@ -800,6 +801,7 @@ struct prcm_regs const dra7xx_prcm = {
 	.cm_clkmode_dpll_dsp			= 0x4a005234,
 	.cm_shadow_freq_config1			= 0x4a005260,
 	.cm_clkmode_dpll_gmac			= 0x4a0052a8,
+	.cm_coreaon_usb_phy_core_clkctrl	= 0x4a008640,
 	.cm_coreaon_usb_phy2_core_clkctrl = 0x4a008688,
 
 	/* cm1.mpu */
@@ -906,6 +908,7 @@ struct prcm_regs const dra7xx_prcm = {
 	.cm_gmac_gmac_clkctrl			= 0x4a0093d0,
 	.cm_l3init_ocp2scp1_clkctrl		= 0x4a0093e0,
 	.cm_l3init_ocp2scp3_clkctrl		= 0x4a0093e8,
+	.cm_l3init_usb_otg_ss_clkctrl		= 0x4a0093f0,
 
 	/* cm2.l4per */
 	.cm_l4per_clkstctrl			= 0x4a009700,
diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c
index 065199be76..7d8cec08c2 100644
--- a/arch/arm/cpu/armv7/omap5/sdram.c
+++ b/arch/arm/cpu/armv7/omap5/sdram.c
@@ -513,7 +513,7 @@ const struct lpddr2_mr_regs mr_regs = {
 	.mr16	= MR16_REF_FULL_ARRAY
 };
 
-static void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr,
+void __weak emif_get_ext_phy_ctrl_const_regs(u32 emif_nr,
 					     const u32 **regs,
 					     u32 *size)
 {
diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h
index 8543f4399c..e756418a59 100644
--- a/arch/arm/include/asm/arch-am33xx/spl.h
+++ b/arch/arm/include/asm/arch-am33xx/spl.h
@@ -25,6 +25,7 @@
 #else
 #define BOOT_DEVICE_XIP       	2
 #define BOOT_DEVICE_NAND	5
+#define BOOT_DEVICE_NAND_I2C	6
 #if defined(CONFIG_AM33XX)
 #define BOOT_DEVICE_MMC1	8
 #define BOOT_DEVICE_MMC2	9	/* eMMC or daughter card */
diff --git a/arch/arm/include/asm/arch-omap5/clock.h b/arch/arm/include/asm/arch-omap5/clock.h
index 30d9de2764..0dc584b8ce 100644
--- a/arch/arm/include/asm/arch-omap5/clock.h
+++ b/arch/arm/include/asm/arch-omap5/clock.h
@@ -278,11 +278,11 @@
 
 /* TPS659038 */
 #define TPS659038_I2C_SLAVE_ADDR		0x58
-#define TPS659038_REG_ADDR_SMPS12_MPU		0x23
-#define TPS659038_REG_ADDR_SMPS45_EVE		0x2B
-#define TPS659038_REG_ADDR_SMPS6_GPU		0x2F
-#define TPS659038_REG_ADDR_SMPS7_CORE		0x33
-#define TPS659038_REG_ADDR_SMPS8_IVA		0x37
+#define TPS659038_REG_ADDR_SMPS12		0x23
+#define TPS659038_REG_ADDR_SMPS45		0x2B
+#define TPS659038_REG_ADDR_SMPS6		0x2F
+#define TPS659038_REG_ADDR_SMPS7		0x33
+#define TPS659038_REG_ADDR_SMPS8		0x37
 
 /* TPS */
 #define TPS62361_I2C_SLAVE_ADDR		0x60
@@ -314,7 +314,7 @@
  */
 #define CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC	31219
 
-#ifdef CONFIG_DRA7XX
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
 #define V_OSCK			20000000	/* Clock output from T2 */
 #else
 #define V_OSCK			19200000	/* Clock output from T2 */
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index b9600cf42d..e2181598d5 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -27,7 +27,7 @@
 #define CONTROL_CORE_ID_CODE	0x4A002204
 #define CONTROL_WKUP_ID_CODE	0x4AE0C204
 
-#ifdef CONFIG_DRA7XX
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
 #define CONTROL_ID_CODE		CONTROL_WKUP_ID_CODE
 #else
 #define CONTROL_ID_CODE		CONTROL_CORE_ID_CODE
@@ -163,7 +163,7 @@ struct s32ktimer {
  * much larger) and do not, at this time, make use of the additional
  * space.
  */
-#ifdef CONFIG_DRA7XX
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
 #define NON_SECURE_SRAM_START	0x40300000
 #define NON_SECURE_SRAM_END	0x40380000	/* Not inclusive */
 #else
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 183823404d..323952f5f1 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -540,6 +540,7 @@ extern struct prcm_regs const omap5_es2_prcm;
 extern struct prcm_regs const omap4_prcm;
 extern struct prcm_regs const dra7xx_prcm;
 extern struct dplls const **dplls_data;
+extern struct dplls dra7xx_dplls;
 extern struct vcores_data const **omap_vcores;
 extern const u32 sys_clk_array[8];
 extern struct omap_sys_ctrl_regs const **ctrl;
@@ -547,6 +548,8 @@ extern struct omap_sys_ctrl_regs const omap4_ctrl;
 extern struct omap_sys_ctrl_regs const omap5_ctrl;
 extern struct omap_sys_ctrl_regs const dra7xx_ctrl;
 
+extern struct pmic_data tps659038;
+
 void hw_data_init(void);
 
 const struct dpll_params *get_mpu_dpll_params(struct dplls const *);
diff --git a/board/comelit/dig297/dig297.c b/board/comelit/dig297/dig297.c
index 2b826dffc5..9d4c41b00b 100644
--- a/board/comelit/dig297/dig297.c
+++ b/board/comelit/dig297/dig297.c
@@ -133,6 +133,11 @@ int board_mmc_init(bd_t *bis)
 {
 	return omap_mmc_init(0, 0, 0, -1, -1);
 }
+
+void board_mmc_power_init(void)
+{
+	twl4030_power_mmc_init(0);
+}
 #endif
 
 #ifdef CONFIG_CMD_NET
diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c
index 886c723900..43463d5b47 100644
--- a/board/compulab/cm_t35/cm_t35.c
+++ b/board/compulab/cm_t35/cm_t35.c
@@ -382,6 +382,13 @@ int board_mmc_init(bd_t *bis)
 }
 #endif
 
+#if defined(CONFIG_GENERIC_MMC)
+void board_mmc_power_init(void)
+{
+	twl4030_power_mmc_init(0);
+}
+#endif
+
 #ifdef CONFIG_SYS_I2C_OMAP34XX
 /*
  * Routine: reset_net_chip
diff --git a/board/corscience/tricorder/tricorder.c b/board/corscience/tricorder/tricorder.c
index 9e81bf3f3f..0fddf4551e 100644
--- a/board/corscience/tricorder/tricorder.c
+++ b/board/corscience/tricorder/tricorder.c
@@ -147,6 +147,13 @@ int board_mmc_init(bd_t *bis)
 }
 #endif
 
+#if defined(CONFIG_GENERIC_MMC)
+void board_mmc_power_init(void)
+{
+	twl4030_power_mmc_init(0);
+}
+#endif
+
 /*
  * Routine: get_board_mem_timings
  * Description: If we use SPL then there is no x-loader nor config header
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
index 7b87cc27c4..47522f8013 100644
--- a/board/isee/igep00x0/igep00x0.c
+++ b/board/isee/igep00x0/igep00x0.c
@@ -150,6 +150,13 @@ int board_mmc_init(bd_t *bis)
 }
 #endif
 
+#if defined(CONFIG_GENERIC_MMC)
+void board_mmc_power_init(void)
+{
+	twl4030_power_mmc_init(0);
+}
+#endif
+
 void set_fdt(void)
 {
 	switch (gd->bd->bi_arch_number) {
diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c
index 1fd9f2cf01..609edf1e5c 100644
--- a/board/logicpd/omap3som/omap3logic.c
+++ b/board/logicpd/omap3som/omap3logic.c
@@ -128,6 +128,13 @@ int board_mmc_init(bd_t *bis)
 }
 #endif
 
+#if defined(CONFIG_GENERIC_MMC)
+void board_mmc_power_init(void)
+{
+	twl4030_power_mmc_init(0);
+}
+#endif
+
 #ifdef CONFIG_SMC911X
 /* GPMC CS1 settings for Logic SOM LV/Torpedo LAN92xx Ethernet chip */
 static const u32 gpmc_lan92xx_config[] = {
diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c
index 9ef002637a..d39203a917 100644
--- a/board/logicpd/zoom1/zoom1.c
+++ b/board/logicpd/zoom1/zoom1.c
@@ -109,6 +109,11 @@ int board_mmc_init(bd_t *bis)
 {
 	return omap_mmc_init(0, 0, 0, -1, -1);
 }
+
+void board_mmc_power_init(void)
+{
+	twl4030_power_mmc_init(0);
+}
 #endif
 
 #ifdef CONFIG_CMD_NET
diff --git a/board/matrix_vision/mvblx/mvblx.c b/board/matrix_vision/mvblx/mvblx.c
index a69359fa1d..c9d615b79a 100644
--- a/board/matrix_vision/mvblx/mvblx.c
+++ b/board/matrix_vision/mvblx/mvblx.c
@@ -94,6 +94,12 @@ int board_mmc_init(bd_t *bis)
 	omap_mmc_init(1, 0, 0, -1, -1);
 	return 0;
 }
+
+void board_mmc_power_init(void)
+{
+	twl4030_power_mmc_init(0);
+	twl4030_power_mmc_init(1);
+}
 #endif
 
 #if defined(CONFIG_CMD_NET)
diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c
index c2e07dbd9b..b6b8ad6c48 100644
--- a/board/nokia/rx51/rx51.c
+++ b/board/nokia/rx51/rx51.c
@@ -659,3 +659,9 @@ int board_mmc_init(bd_t *bis)
 	omap_mmc_init(1, 0, 0, -1, -1);
 	return 0;
 }
+
+void board_mmc_power_init(void)
+{
+	twl4030_power_mmc_init(0);
+	twl4030_power_mmc_init(1);
+}
diff --git a/board/overo/overo.c b/board/overo/overo.c
index dfb8602baf..b7f85e711b 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -493,6 +493,13 @@ int board_mmc_init(bd_t *bis)
 }
 #endif
 
+#if defined(CONFIG_GENERIC_MMC)
+void board_mmc_power_init(void)
+{
+	twl4030_power_mmc_init(0);
+}
+#endif
+
 #if defined(CONFIG_USB_EHCI) &&  !defined(CONFIG_SPL_BUILD)
 static struct omap_usbhs_board_data usbhs_bdata = {
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
diff --git a/board/pandora/pandora.c b/board/pandora/pandora.c
index 146dcea4e1..59b5a7e2cd 100644
--- a/board/pandora/pandora.c
+++ b/board/pandora/pandora.c
@@ -126,4 +126,9 @@ int board_mmc_init(bd_t *bis)
 {
 	return omap_mmc_init(0, 0, 0, -1, -1);
 }
+
+void board_mmc_power_init(void)
+{
+	twl4030_power_mmc_init(0);
+}
 #endif
diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c
index 2782bcc2a7..cc0ac6b0bd 100644
--- a/board/siemens/common/board.c
+++ b/board/siemens/common/board.c
@@ -96,15 +96,6 @@ const struct dpll_params *get_dpll_ddr_params(void)
 	return &dpll_ddr;
 }
 
-#ifdef CONFIG_BOARD_LATE_INIT
-int board_late_init(void)
-{
-	omap_nand_switch_ecc(1, 8);
-
-	return 0;
-}
-#endif
-
 #ifndef CONFIG_SPL_BUILD
 #if defined(BOARD_DFU_BUTTON_GPIO)
 /*
diff --git a/board/siemens/common/factoryset.c b/board/siemens/common/factoryset.c
index 266dbbbb5f..7baac3dda6 100644
--- a/board/siemens/common/factoryset.c
+++ b/board/siemens/common/factoryset.c
@@ -86,6 +86,7 @@ int get_factory_record_val(unsigned char *eeprom_buf, int size,	uchar *record,
 	int i, nxt = 0;
 	int c;
 	unsigned char end = 0xff;
+	unsigned char tmp;
 
 	for (i = 0; fact_get_char(i) != end; i = nxt) {
 		nxt = i + 1;
@@ -93,6 +94,7 @@ int get_factory_record_val(unsigned char *eeprom_buf, int size,	uchar *record,
 			int pos;
 			int endpos;
 			int z;
+			int level = 0;
 
 			c = strncmp((char *)&eeprom_buf[i + 1], (char *)record,
 				    strlen((char *)record));
@@ -103,22 +105,30 @@ int get_factory_record_val(unsigned char *eeprom_buf, int size,	uchar *record,
 				/* search for "<" */
 				c = -1;
 				for (z = pos; fact_get_char(z) != end; z++) {
-					if ((fact_get_char(z) == '<')  ||
-					    (fact_get_char(z) == '>')) {
-						endpos = z;
-						nxt = endpos;
-						c = 0;
-						break;
+					if (fact_get_char(z) == '<') {
+						if (level == 0) {
+							endpos = z;
+							nxt = endpos;
+							c = 0;
+							break;
+						} else {
+							level--;
+						}
 					}
+					if (fact_get_char(z) == '>')
+						level++;
 				}
+			} else {
+				continue;
 			}
 			if (c == 0) {
 				/* end found -> call get_factory_val */
+				tmp = eeprom_buf[endpos];
 				eeprom_buf[endpos] = end;
 				ret = get_factory_val(&eeprom_buf[pos],
-					size - pos, name, buf, len);
+					endpos - pos, name, buf, len);
 				/* fix buffer */
-				eeprom_buf[endpos] = '<';
+				eeprom_buf[endpos] = tmp;
 				debug("%s: %s.%s = %s\n",
 				      __func__, record, name, buf);
 				return ret;
@@ -210,15 +220,6 @@ int factoryset_read_eeprom(int i2c_addr)
 	printf("DFU USB: VID = 0x%4x, PID = 0x%4x\n", factory_dat.usb_vendor_id,
 	       factory_dat.usb_product_id);
 #endif
-	if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV",
-					(uchar *)"id", buf,
-					MAX_STRING_LENGTH)) {
-		if (strncmp((const char *)buf, "PXM50", 5) == 0)
-			factory_dat.pxm50 = 1;
-		else
-			factory_dat.pxm50 = 0;
-	}
-	debug("PXM50: %d\n", factory_dat.pxm50);
 #if defined(CONFIG_VIDEO)
 	if (0 <= get_factory_record_val(cp, size, (uchar *)"DISP1",
 					(uchar *)"name", factory_dat.disp_name,
@@ -238,6 +239,23 @@ int factoryset_read_eeprom(int i2c_addr)
 							    NULL, 16);
 		debug("version number: %d\n", factory_dat.version);
 	}
+	/* Get ASN from factory set if available */
+	if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV",
+					(uchar *)"id", factory_dat.asn,
+					MAX_STRING_LENGTH)) {
+		debug("factoryset asn: %s\n", factory_dat.asn);
+	} else {
+		factory_dat.asn[0] = 0;
+	}
+	/* Get COMP/ver from factory set if available */
+	if (0 <= get_factory_record_val(cp, size, (uchar *)"COMP",
+					(uchar *)"ver",
+					factory_dat.comp_version,
+					MAX_STRING_LENGTH)) {
+		debug("factoryset COMP/ver: %s\n", factory_dat.comp_version);
+	} else {
+		strcpy((char *)factory_dat.comp_version, "1.0");
+	}
 
 	return 0;
 
diff --git a/board/siemens/common/factoryset.h b/board/siemens/common/factoryset.h
index 4d6de10f52..3f23d5ebf4 100644
--- a/board/siemens/common/factoryset.h
+++ b/board/siemens/common/factoryset.h
@@ -20,6 +20,8 @@ struct factorysetcontainer {
 #endif
 	unsigned char serial[MAX_STRING_LENGTH];
 	int version;
+	uchar asn[MAX_STRING_LENGTH];
+	uchar comp_version[MAX_STRING_LENGTH];
 };
 
 int factoryset_read_eeprom(int i2c_addr);
diff --git a/board/siemens/draco/board.c b/board/siemens/draco/board.c
index 9be2e344f8..ede73baf3e 100644
--- a/board/siemens/draco/board.c
+++ b/board/siemens/draco/board.c
@@ -280,4 +280,13 @@ U_BOOT_CMD(
 #endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */
 #endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */
 
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+	omap_nand_switch_ecc(1, 8);
+
+	return 0;
+}
+#endif
+
 #include "../common/board.c"
diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c
index 559af0e0e5..264ba025b7 100644
--- a/board/siemens/pxm2/board.c
+++ b/board/siemens/pxm2/board.c
@@ -428,4 +428,38 @@ static int board_video_init(void)
 	return 0;
 }
 #endif
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+	int ret;
+
+	omap_nand_switch_ecc(1, 8);
+
+#ifdef CONFIG_FACTORYSET
+	if (factory_dat.asn[0] != 0) {
+		char tmp[2 * MAX_STRING_LENGTH + 2];
+
+		if (strncmp((const char *)factory_dat.asn, "PXM50", 5) == 0)
+			factory_dat.pxm50 = 1;
+		else
+			factory_dat.pxm50 = 0;
+		sprintf(tmp, "%s_%s", factory_dat.asn,
+			factory_dat.comp_version);
+		ret = setenv("boardid", tmp);
+		if (ret)
+			printf("error setting board id\n");
+	} else {
+		factory_dat.pxm50 = 1;
+		ret = setenv("boardid", "PXM50_1.0");
+		if (ret)
+			printf("error setting board id\n");
+	}
+	debug("PXM50: %d\n", factory_dat.pxm50);
+#endif
+
+	return 0;
+}
+#endif
+
 #include "../common/board.c"
diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c
index 1752df2c4f..fb840f7ed2 100644
--- a/board/siemens/rut/board.c
+++ b/board/siemens/rut/board.c
@@ -467,4 +467,27 @@ static int board_video_init(void)
 	return 0;
 }
 #endif /* ifdef CONFIG_VIDEO */
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+	int ret;
+	char tmp[2 * MAX_STRING_LENGTH + 2];
+
+	omap_nand_switch_ecc(1, 8);
+
+	if (factory_dat.asn[0] != 0)
+		sprintf(tmp, "%s_%s", factory_dat.asn,
+			factory_dat.comp_version);
+	else
+		sprintf(tmp, "QMX7.E38_4.0");
+
+	ret = setenv("boardid", tmp);
+	if (ret)
+		printf("error setting board id\n");
+
+	return 0;
+}
+#endif
+
 #include "../common/board.c"
diff --git a/board/technexion/tao3530/tao3530.c b/board/technexion/tao3530/tao3530.c
index 44a82406aa..744ff44008 100644
--- a/board/technexion/tao3530/tao3530.c
+++ b/board/technexion/tao3530/tao3530.c
@@ -188,6 +188,13 @@ int board_mmc_init(bd_t *bis)
 }
 #endif
 
+#if defined(CONFIG_GENERIC_MMC)
+void board_mmc_power_init(void)
+{
+	twl4030_power_mmc_init(0);
+}
+#endif
+
 #if defined(CONFIG_USB_EHCI) && !defined(CONFIG_SPL_BUILD)
 /* Call usb_stop() before starting the kernel */
 void show_boot_progress(int val)
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index 4c5e38136f..7b37fbe299 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -534,6 +534,13 @@ int board_mmc_init(bd_t *bis)
 }
 #endif
 
+#if defined(CONFIG_GENERIC_MMC)
+void board_mmc_power_init(void)
+{
+	twl4030_power_mmc_init(0);
+}
+#endif
+
 #if defined(CONFIG_USB_EHCI) && !defined(CONFIG_SPL_BUILD)
 /* Call usb_stop() before starting the kernel */
 void show_boot_progress(int val)
diff --git a/board/ti/beagle_x15/Kconfig b/board/ti/beagle_x15/Kconfig
new file mode 100644
index 0000000000..a305ff1044
--- /dev/null
+++ b/board/ti/beagle_x15/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_BEAGLE_X15
+
+config SYS_BOARD
+	default "beagle_x15"
+
+config SYS_VENDOR
+	default "ti"
+
+config SYS_CONFIG_NAME
+	default "beagle_x15"
+
+endif
diff --git a/board/ti/beagle_x15/Makefile b/board/ti/beagle_x15/Makefile
new file mode 100644
index 0000000000..5cd6873f5e
--- /dev/null
+++ b/board/ti/beagle_x15/Makefile
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2014
+# Texas Instruments, <www.ti.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= board.o
diff --git a/board/ti/beagle_x15/board.c b/board/ti/beagle_x15/board.c
new file mode 100644
index 0000000000..db96e347e7
--- /dev/null
+++ b/board/ti/beagle_x15/board.c
@@ -0,0 +1,395 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Felipe Balbi <balbi@ti.com>
+ *
+ * Based on board/ti/dra7xx/evm.c
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <palmas.h>
+#include <sata.h>
+#include <usb.h>
+#include <asm/omap_common.h>
+#include <asm/emif.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sata.h>
+#include <asm/arch/gpio.h>
+#include <environment.h>
+
+#include "mux_data.h"
+
+#ifdef CONFIG_DRIVER_TI_CPSW
+#include <cpsw.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const struct omap_sysinfo sysinfo = {
+	"Board: BeagleBoard x15\n"
+};
+
+static const struct dmm_lisa_map_regs beagle_x15_lisa_regs = {
+	.dmm_lisa_map_3 = 0x80740300,
+	.is_ma_present  = 0x1
+};
+
+void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
+{
+	*dmm_lisa_regs = &beagle_x15_lisa_regs;
+}
+
+static const struct emif_regs beagle_x15_emif1_ddr3_532mhz_emif_regs = {
+	.sdram_config_init	= 0x61851b32,
+	.sdram_config		= 0x61851b32,
+	.sdram_config2		= 0x00000000,
+	.ref_ctrl		= 0x00001035,
+	.sdram_tim1		= 0xceef266b,
+	.sdram_tim2		= 0x328f7fda,
+	.sdram_tim3		= 0x027f88a8,
+	.read_idle_ctrl		= 0x00050001,
+	.zq_config		= 0x0007190b,
+	.temp_alert_config	= 0x00000000,
+	.emif_ddr_phy_ctlr_1_init = 0x0e24400a,
+	.emif_ddr_phy_ctlr_1	= 0x0e24400a,
+	.emif_ddr_ext_phy_ctrl_1 = 0x10040100,
+	.emif_ddr_ext_phy_ctrl_2 = 0x00740074,
+	.emif_ddr_ext_phy_ctrl_3 = 0x00780078,
+	.emif_ddr_ext_phy_ctrl_4 = 0x007c007c,
+	.emif_ddr_ext_phy_ctrl_5 = 0x007b007b,
+	.emif_rd_wr_lvl_rmp_win	= 0x00000000,
+	.emif_rd_wr_lvl_rmp_ctl	= 0x00000000,
+	.emif_rd_wr_lvl_ctl	= 0x00000000,
+	.emif_rd_wr_exec_thresh	= 0x00000305
+};
+
+static const u32 beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs[] = {
+	0x00800080,
+	0x00360036,
+	0x00340034,
+	0x00360036,
+	0x00350035,
+	0x00350035,
+
+	0x01ff01ff,
+	0x01ff01ff,
+	0x01ff01ff,
+	0x01ff01ff,
+	0x01ff01ff,
+
+	0x00430043,
+	0x003e003e,
+	0x004a004a,
+	0x00470047,
+	0x00400040,
+
+	0x00000000,
+	0x00600020,
+	0x40010080,
+	0x08102040,
+
+	0x00400040,
+	0x00400040,
+	0x00400040,
+	0x00400040,
+	0x00400040
+};
+
+static const struct emif_regs beagle_x15_emif2_ddr3_532mhz_emif_regs = {
+	.sdram_config_init	= 0x61851b32,
+	.sdram_config		= 0x61851b32,
+	.sdram_config2		= 0x00000000,
+	.ref_ctrl		= 0x00001035,
+	.sdram_tim1		= 0xceef266b,
+	.sdram_tim2		= 0x328f7fda,
+	.sdram_tim3		= 0x027f88a8,
+	.read_idle_ctrl		= 0x00050001,
+	.zq_config		= 0x0007190b,
+	.temp_alert_config	= 0x00000000,
+	.emif_ddr_phy_ctlr_1_init = 0x0e24400a,
+	.emif_ddr_phy_ctlr_1	= 0x0e24400a,
+	.emif_ddr_ext_phy_ctrl_1 = 0x10040100,
+	.emif_ddr_ext_phy_ctrl_2 = 0x00820082,
+	.emif_ddr_ext_phy_ctrl_3 = 0x008b008b,
+	.emif_ddr_ext_phy_ctrl_4 = 0x00800080,
+	.emif_ddr_ext_phy_ctrl_5 = 0x007e007e,
+	.emif_rd_wr_lvl_rmp_win	= 0x00000000,
+	.emif_rd_wr_lvl_rmp_ctl	= 0x00000000,
+	.emif_rd_wr_lvl_ctl	= 0x00000000,
+	.emif_rd_wr_exec_thresh	= 0x00000305
+};
+
+static const u32 beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs[] = {
+	0x00800080,
+	0x00370037,
+	0x00390039,
+	0x00360036,
+	0x00370037,
+	0x00350035,
+	0x01ff01ff,
+	0x01ff01ff,
+	0x01ff01ff,
+	0x01ff01ff,
+	0x01ff01ff,
+	0x00540054,
+	0x00540054,
+	0x004e004e,
+	0x004c004c,
+	0x00400040,
+
+	0x00000000,
+	0x00600020,
+	0x40010080,
+	0x08102040,
+
+	0x00400040,
+	0x00400040,
+	0x00400040,
+	0x00400040,
+	0x00400040
+};
+
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
+{
+	switch (emif_nr) {
+	case 1:
+		*regs = &beagle_x15_emif1_ddr3_532mhz_emif_regs;
+		break;
+	case 2:
+		*regs = &beagle_x15_emif2_ddr3_532mhz_emif_regs;
+		break;
+	}
+}
+
+void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, const u32 **regs, u32 *size)
+{
+	switch (emif_nr) {
+	case 1:
+		*regs = beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs;
+		*size = ARRAY_SIZE(beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs);
+		break;
+	case 2:
+		*regs = beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs;
+		*size = ARRAY_SIZE(beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs);
+		break;
+	}
+}
+
+struct vcores_data beagle_x15_volts = {
+	.mpu.value		= VDD_MPU_DRA752,
+	.mpu.efuse.reg		= STD_FUSE_OPP_VMIN_MPU_NOM,
+	.mpu.efuse.reg_bits     = DRA752_EFUSE_REGBITS,
+	.mpu.addr		= TPS659038_REG_ADDR_SMPS12,
+	.mpu.pmic		= &tps659038,
+
+	.eve.value		= VDD_EVE_DRA752,
+	.eve.efuse.reg		= STD_FUSE_OPP_VMIN_DSPEVE_NOM,
+	.eve.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
+	.eve.addr		= TPS659038_REG_ADDR_SMPS45,
+	.eve.pmic		= &tps659038,
+
+	.gpu.value		= VDD_GPU_DRA752,
+	.gpu.efuse.reg		= STD_FUSE_OPP_VMIN_GPU_NOM,
+	.gpu.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
+	.gpu.addr		= TPS659038_REG_ADDR_SMPS45,
+	.gpu.pmic		= &tps659038,
+
+	.core.value		= VDD_CORE_DRA752,
+	.core.efuse.reg		= STD_FUSE_OPP_VMIN_CORE_NOM,
+	.core.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
+	.core.addr		= TPS659038_REG_ADDR_SMPS6,
+	.core.pmic		= &tps659038,
+
+	.iva.value		= VDD_IVA_DRA752,
+	.iva.efuse.reg		= STD_FUSE_OPP_VMIN_IVA_NOM,
+	.iva.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
+	.iva.addr		= TPS659038_REG_ADDR_SMPS45,
+	.iva.pmic		= &tps659038,
+};
+
+void hw_data_init(void)
+{
+	*prcm = &dra7xx_prcm;
+	*dplls_data = &dra7xx_dplls;
+	*omap_vcores = &beagle_x15_volts;
+	*ctrl = &dra7xx_ctrl;
+}
+
+int board_init(void)
+{
+	gpmc_init();
+	gd->bd->bi_boot_params = (CONFIG_SYS_SDRAM_BASE + 0x100);
+
+	return 0;
+}
+
+int board_late_init(void)
+{
+	init_sata(0);
+	/*
+	 * DEV_CTRL.DEV_ON = 1 please - else palmas switches off in 8 seconds
+	 * This is the POWERHOLD-in-Low behavior.
+	 */
+	palmas_i2c_write_u8(TPS65903X_CHIP_P1, 0xA0, 0x1);
+	return 0;
+}
+
+static void do_set_mux32(u32 base,
+			 struct pad_conf_entry const *array, int size)
+{
+	int i;
+	struct pad_conf_entry *pad = (struct pad_conf_entry *)array;
+
+	for (i = 0; i < size; i++, pad++)
+		writel(pad->val, base + pad->offset);
+}
+
+void set_muxconf_regs_essential(void)
+{
+	do_set_mux32((*ctrl)->control_padconf_core_base,
+		     core_padconf_array_essential,
+		     sizeof(core_padconf_array_essential) /
+		     sizeof(struct pad_conf_entry));
+}
+
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
+int board_mmc_init(bd_t *bis)
+{
+	omap_mmc_init(0, 0, 0, -1, -1);
+	omap_mmc_init(1, 0, 0, -1, -1);
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT)
+int spl_start_uboot(void)
+{
+	/* break into full u-boot on 'c' */
+	if (serial_tstc() && serial_getc() == 'c')
+		return 1;
+
+#ifdef CONFIG_SPL_ENV_SUPPORT
+	env_init();
+	env_relocate_spec();
+	if (getenv_yesno("boot_os") != 1)
+		return 1;
+#endif
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_DRIVER_TI_CPSW
+
+/* Delay value to add to calibrated value */
+#define RGMII0_TXCTL_DLY_VAL		((0x3 << 5) + 0x8)
+#define RGMII0_TXD0_DLY_VAL		((0x3 << 5) + 0x8)
+#define RGMII0_TXD1_DLY_VAL		((0x3 << 5) + 0x2)
+#define RGMII0_TXD2_DLY_VAL		((0x4 << 5) + 0x0)
+#define RGMII0_TXD3_DLY_VAL		((0x4 << 5) + 0x0)
+#define VIN2A_D13_DLY_VAL		((0x3 << 5) + 0x8)
+#define VIN2A_D17_DLY_VAL		((0x3 << 5) + 0x8)
+#define VIN2A_D16_DLY_VAL		((0x3 << 5) + 0x2)
+#define VIN2A_D15_DLY_VAL		((0x4 << 5) + 0x0)
+#define VIN2A_D14_DLY_VAL		((0x4 << 5) + 0x0)
+
+static void cpsw_control(int enabled)
+{
+	/* VTP can be added here */
+}
+
+static struct cpsw_slave_data cpsw_slaves[] = {
+	{
+		.slave_reg_ofs	= 0x208,
+		.sliver_reg_ofs	= 0xd80,
+		.phy_addr	= 1,
+	},
+	{
+		.slave_reg_ofs	= 0x308,
+		.sliver_reg_ofs	= 0xdc0,
+		.phy_addr	= 2,
+	},
+};
+
+static struct cpsw_platform_data cpsw_data = {
+	.mdio_base		= CPSW_MDIO_BASE,
+	.cpsw_base		= CPSW_BASE,
+	.mdio_div		= 0xff,
+	.channels		= 8,
+	.cpdma_reg_ofs		= 0x800,
+	.slaves			= 1,
+	.slave_data		= cpsw_slaves,
+	.ale_reg_ofs		= 0xd00,
+	.ale_entries		= 1024,
+	.host_port_reg_ofs	= 0x108,
+	.hw_stats_reg_ofs	= 0x900,
+	.bd_ram_ofs		= 0x2000,
+	.mac_control		= (1 << 5),
+	.control		= cpsw_control,
+	.host_port_num		= 0,
+	.version		= CPSW_CTRL_VERSION_2,
+};
+
+int board_eth_init(bd_t *bis)
+{
+	int ret;
+	uint8_t mac_addr[6];
+	uint32_t mac_hi, mac_lo;
+	uint32_t ctrl_val;
+
+	/* try reading mac address from efuse */
+	mac_lo = readl((*ctrl)->control_core_mac_id_0_lo);
+	mac_hi = readl((*ctrl)->control_core_mac_id_0_hi);
+	mac_addr[0] = (mac_hi & 0xFF0000) >> 16;
+	mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+	mac_addr[2] = mac_hi & 0xFF;
+	mac_addr[3] = (mac_lo & 0xFF0000) >> 16;
+	mac_addr[4] = (mac_lo & 0xFF00) >> 8;
+	mac_addr[5] = mac_lo & 0xFF;
+
+	if (!getenv("ethaddr")) {
+		printf("<ethaddr> not set. Validating first E-fuse MAC\n");
+
+		if (is_valid_ether_addr(mac_addr))
+			eth_setenv_enetaddr("ethaddr", mac_addr);
+	}
+
+	mac_lo = readl((*ctrl)->control_core_mac_id_1_lo);
+	mac_hi = readl((*ctrl)->control_core_mac_id_1_hi);
+	mac_addr[0] = (mac_hi & 0xFF0000) >> 16;
+	mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+	mac_addr[2] = mac_hi & 0xFF;
+	mac_addr[3] = (mac_lo & 0xFF0000) >> 16;
+	mac_addr[4] = (mac_lo & 0xFF00) >> 8;
+	mac_addr[5] = mac_lo & 0xFF;
+
+	if (!getenv("eth1addr")) {
+		if (is_valid_ether_addr(mac_addr))
+			eth_setenv_enetaddr("eth1addr", mac_addr);
+	}
+
+	ctrl_val = readl((*ctrl)->control_core_control_io1) & (~0x33);
+	ctrl_val |= 0x22;
+	writel(ctrl_val, (*ctrl)->control_core_control_io1);
+
+	ret = cpsw_register(&cpsw_data);
+	if (ret < 0)
+		printf("Error %d registering CPSW switch\n", ret);
+
+	return ret;
+}
+#endif
+
+#ifdef CONFIG_USB_XHCI_OMAP
+int board_usb_init(int index, enum usb_init_type init)
+{
+	setbits_le32((*prcm)->cm_l3init_usb_otg_ss_clkctrl,
+			OTG_SS_CLKCTRL_MODULEMODE_HW | OPTFCLKEN_REFCLK960M);
+
+	return 0;
+}
+#endif
diff --git a/board/ti/beagle_x15/mux_data.h b/board/ti/beagle_x15/mux_data.h
new file mode 100644
index 0000000000..2294abec71
--- /dev/null
+++ b/board/ti/beagle_x15/mux_data.h
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Felipe Balbi <balbi@ti.com>
+ *
+ * Based on board/ti/dra7xx/evm.c
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#ifndef _MUX_DATA_BEAGLE_X15_H_
+#define _MUX_DATA_BEAGLE_X15_H_
+
+#include <asm/arch/mux_dra7xx.h>
+
+const struct pad_conf_entry core_padconf_array_essential[] = {
+	{MMC1_CLK, (IEN | PTU | PDIS | M0)},	/* MMC1_CLK */
+	{MMC1_CMD, (IEN | PTU | PDIS | M0)},	/* MMC1_CMD */
+	{MMC1_DAT0, (IEN | PTU | PDIS | M0)},	/* MMC1_DAT0 */
+	{MMC1_DAT1, (IEN | PTU | PDIS | M0)},	/* MMC1_DAT1 */
+	{MMC1_DAT2, (IEN | PTU | PDIS | M0)},	/* MMC1_DAT2 */
+	{MMC1_DAT3, (IEN | PTU | PDIS | M0)},	/* MMC1_DAT3 */
+	{MMC1_SDCD, (FSC | IEN | PTU | PDIS | M0)}, /* MMC1_SDCD */
+	{MMC1_SDWP, (FSC | IEN | PTD | PEN | M14)}, /* MMC1_SDWP */
+	{GPMC_A19, (IEN | PTU | PDIS | M1)},	/* mmc2_dat4 */
+	{GPMC_A20, (IEN | PTU | PDIS | M1)},	/* mmc2_dat5 */
+	{GPMC_A21, (IEN | PTU | PDIS | M1)},	/* mmc2_dat6 */
+	{GPMC_A22, (IEN | PTU | PDIS | M1)},	/* mmc2_dat7 */
+	{GPMC_A23, (IEN | PTU | PDIS | M1)},	/* mmc2_clk */
+	{GPMC_A24, (IEN | PTU | PDIS | M1)},	/* mmc2_dat0 */
+	{GPMC_A25, (IEN | PTU | PDIS | M1)},	/* mmc2_dat1 */
+	{GPMC_A26, (IEN | PTU | PDIS | M1)},	/* mmc2_dat2 */
+	{GPMC_A27, (IEN | PTU | PDIS | M1)},	/* mmc2_dat3 */
+	{GPMC_CS1, (IEN | PTU | PDIS | M1)},	/* mmm2_cmd */
+	{UART3_RXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART3_RXD */
+	{UART3_TXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART3_TXD */
+	{I2C1_SDA, (IEN | PTU | PDIS | M0)},	/* I2C1_SDA */
+	{I2C1_SCL, (IEN | PTU | PDIS | M0)},	/* I2C1_SCL */
+	{MDIO_MCLK, (PTU | PEN | M0)},		/* MDIO_MCLK  */
+	{MDIO_D, (IEN | PTU | PEN | M0)},	/* MDIO_D  */
+	{RGMII0_TXC, (M0) },
+	{RGMII0_TXCTL, (M0) },
+	{RGMII0_TXD3, (M0) },
+	{RGMII0_TXD2, (M0) },
+	{RGMII0_TXD1, (M0) },
+	{RGMII0_TXD0, (M0) },
+	{RGMII0_RXC, (IEN | M0) },
+	{RGMII0_RXCTL, (IEN | M0) },
+	{RGMII0_RXD3, (IEN | M0) },
+	{RGMII0_RXD2, (IEN | M0) },
+	{RGMII0_RXD1, (IEN | M0) },
+	{RGMII0_RXD0, (IEN | M0) },
+	{USB1_DRVVBUS, (M0 | FSC) },
+	{SPI1_CS1, (PEN | IDIS | M14) }, /* GPIO7_11 */
+};
+#endif /* _MUX_DATA_BEAGLE_X15_H_ */
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 37df7b2cad..65222419eb 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -96,18 +96,6 @@ int board_late_init(void)
 	return 0;
 }
 
-/**
- * @brief misc_init_r - Configure EVM board specific configurations
- * such as power configurations, ethernet initialization as phase2 of
- * boot sequence
- *
- * @return 0
- */
-int misc_init_r(void)
-{
-	return 0;
-}
-
 static void do_set_mux32(u32 base,
 			 struct pad_conf_entry const *array, int size)
 {
diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h
index 7276014f1d..48240779c9 100644
--- a/board/ti/dra7xx/mux_data.h
+++ b/board/ti/dra7xx/mux_data.h
@@ -130,8 +130,8 @@ const struct pad_conf_entry core_padconf_array_essential[] = {
 	{GPMC_A13, (IEN | PDIS | M1)},  /* QSPI1_RTCLK */
 	{GPMC_A14, (IEN | PDIS | M1)},  /* QSPI1_D[3] */
 	{GPMC_A15, (IEN | PDIS | M1)},  /* QSPI1_D[2] */
-	{GPMC_A16, (IEN | PDIS | M1)},  /* QSPI1_D[1] */
-	{GPMC_A17, (IEN | PDIS | M1)},  /* QSPI1_D[0] */
+	{GPMC_A16, (IEN | PDIS | M1)},  /* QSPI1_D[0] */
+	{GPMC_A17, (IEN | PDIS | M1)},  /* QSPI1_D[1] */
 	{GPMC_A18, (M1)},  /* QSPI1_SCLK */
 	{GPMC_A3, (IEN | PDIS | M1)},   /* QSPI1_CS2 */
 	{GPMC_A4, (IEN | PDIS | M1)},   /* QSPI1_CS3 */
diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c
index 81dd081d76..3f93d9cbe2 100644
--- a/board/ti/evm/evm.c
+++ b/board/ti/evm/evm.c
@@ -20,6 +20,7 @@
 #include <asm/arch/mmc_host_def.h>
 #include <asm/gpio.h>
 #include <i2c.h>
+#include <twl4030.h>
 #include <asm/mach-types.h>
 #include <linux/mtd/nand.h>
 #include "evm.h"
@@ -264,3 +265,10 @@ int board_mmc_init(bd_t *bis)
 	return omap_mmc_init(0, 0, 0, -1, -1);
 }
 #endif
+
+#if defined(CONFIG_GENERIC_MMC)
+void board_mmc_power_init(void)
+{
+	twl4030_power_mmc_init(0);
+}
+#endif
diff --git a/board/ti/sdp3430/sdp.c b/board/ti/sdp3430/sdp.c
index 957940d53f..7171363e76 100644
--- a/board/ti/sdp3430/sdp.c
+++ b/board/ti/sdp3430/sdp.c
@@ -195,4 +195,9 @@ int board_mmc_init(bd_t *bis)
 {
 	return omap_mmc_init(0, 0, 0, -1, -1);
 }
+
+void board_mmc_power_init(void)
+{
+	twl4030_power_mmc_init(0);
+}
 #endif
diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c
index bcbee73d5d..b978044131 100644
--- a/board/timll/devkit8000/devkit8000.c
+++ b/board/timll/devkit8000/devkit8000.c
@@ -124,6 +124,13 @@ int board_mmc_init(bd_t *bis)
 }
 #endif
 
+#if defined(CONFIG_GENERIC_MMC)
+void board_mmc_power_init(void)
+{
+	twl4030_power_mmc_init(0);
+}
+#endif
+
 #if defined(CONFIG_DRIVER_DM9000) & !defined(CONFIG_SPL_BUILD)
 /*
  * Routine: board_eth_init
diff --git a/configs/beagle_x15_defconfig b/configs/beagle_x15_defconfig
new file mode 100644
index 0000000000..872ab63bdd
--- /dev/null
+++ b/configs/beagle_x15_defconfig
@@ -0,0 +1,5 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3"
++S:CONFIG_ARM=y
++S:CONFIG_OMAP54XX=y
++S:CONFIG_TARGET_BEAGLE_X15=y
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 44a4feb96e..8436bc7f5d 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -1277,6 +1277,11 @@ block_dev_desc_t *mmc_get_dev(int dev)
 }
 #endif
 
+/* board-specific MMC power initializations. */
+__weak void board_mmc_power_init(void)
+{
+}
+
 int mmc_start_init(struct mmc *mmc)
 {
 	int err;
@@ -1293,6 +1298,8 @@ int mmc_start_init(struct mmc *mmc)
 	if (mmc->has_init)
 		return 0;
 
+	board_mmc_power_init();
+
 	/* made sure it's not NULL earlier */
 	err = mmc->cfg->ops->init(mmc);
 
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index ffb5284a00..c880cedb0a 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -135,12 +135,7 @@ static unsigned char mmc_board_init(struct mmc *mmc)
 	pbias_lite = readl(&t2_base->pbias_lite);
 	pbias_lite &= ~(PBIASLITEPWRDNZ1 | PBIASLITEPWRDNZ0);
 	writel(pbias_lite, &t2_base->pbias_lite);
-#endif
-#if defined(CONFIG_TWL4030_POWER)
-	twl4030_power_mmc_init();
-	mdelay(100);	/* ramp-up delay from Linux code */
-#endif
-#if defined(CONFIG_OMAP34XX)
+
 	writel(pbias_lite | PBIASLITEPWRDNZ1 |
 		PBIASSPEEDCTRL0 | PBIASLITEPWRDNZ0,
 		&t2_base->pbias_lite);
@@ -663,7 +658,8 @@ int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio,
 	case 1:
 		priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC2_BASE;
 #if (defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) || \
-     defined(CONFIG_DRA7XX)) && defined(CONFIG_HSMMC2_8BIT)
+     defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)) && \
+		defined(CONFIG_HSMMC2_8BIT)
 		/* Enable 8-bit interface for eMMC on OMAP4/5 or DRA7XX */
 		host_caps_val |= MMC_MODE_8BIT;
 #endif
@@ -672,7 +668,7 @@ int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio,
 #ifdef OMAP_HSMMC3_BASE
 	case 2:
 		priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC3_BASE;
-#if defined(CONFIG_DRA7XX) && defined(CONFIG_HSMMC3_8BIT)
+#if (defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)) && defined(CONFIG_HSMMC3_8BIT)
 		/* Enable 8-bit interface for eMMC on DRA7XX */
 		host_caps_val |= MMC_MODE_8BIT;
 #endif
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index 40d670563c..93829a40b6 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -73,14 +73,11 @@ static void omap_nand_hwcontrol(struct mtd_info *mtd, int32_t cmd,
 		writeb(cmd, this->IO_ADDR_W);
 }
 
-#ifdef CONFIG_SPL_BUILD
 /* Check wait pin as dev ready indicator */
-static int omap_spl_dev_ready(struct mtd_info *mtd)
+static int omap_dev_ready(struct mtd_info *mtd)
 {
 	return gpmc_cfg->status & (1 << 8);
 }
-#endif
-
 
 /*
  * gen_true_ecc - This function will generate true ECC value, which
@@ -887,7 +884,9 @@ int board_nand_init(struct nand_chip *nand)
 		nand->read_buf = nand_read_buf16;
 	else
 		nand->read_buf = nand_read_buf;
-	nand->dev_ready = omap_spl_dev_ready;
 #endif
+
+	nand->dev_ready = omap_dev_ready;
+
 	return 0;
 }
diff --git a/drivers/power/palmas.c b/drivers/power/palmas.c
index cfbc9dc522..6430fe004d 100644
--- a/drivers/power/palmas.c
+++ b/drivers/power/palmas.c
@@ -27,7 +27,7 @@ int palmas_mmc1_poweron_ldo(void)
 {
 	u8 val = 0;
 
-#if defined(CONFIG_DRA7XX)
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
 	/*
 	 * Currently valid for the dra7xx_evm board:
 	 * Set TPS659038 LDO1 to 3.0 V
diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c
index e578ae6342..7f1fdd1534 100644
--- a/drivers/power/twl4030.c
+++ b/drivers/power/twl4030.c
@@ -91,17 +91,23 @@ void twl4030_power_init(void)
 				TWL4030_PM_RECEIVER_DEV_GRP_P1);
 }
 
-void twl4030_power_mmc_init(void)
+void twl4030_power_mmc_init(int dev_index)
 {
-	/* Set VMMC1 to 3.15 Volts */
-	twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC1_DEDICATED,
-				TWL4030_PM_RECEIVER_VMMC1_VSEL_32,
-				TWL4030_PM_RECEIVER_VMMC1_DEV_GRP,
-				TWL4030_PM_RECEIVER_DEV_GRP_P1);
+	if (dev_index == 0) {
+		/* Set VMMC1 to 3.15 Volts */
+		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC1_DEDICATED,
+					TWL4030_PM_RECEIVER_VMMC1_VSEL_32,
+					TWL4030_PM_RECEIVER_VMMC1_DEV_GRP,
+					TWL4030_PM_RECEIVER_DEV_GRP_P1);
 
-	/* Set VMMC2 to 3.15 Volts */
-	twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC2_DEDICATED,
-				TWL4030_PM_RECEIVER_VMMC2_VSEL_32,
-				TWL4030_PM_RECEIVER_VMMC2_DEV_GRP,
-				TWL4030_PM_RECEIVER_DEV_GRP_P1);
+		mdelay(100);	/* ramp-up delay from Linux code */
+	} else if (dev_index == 1) {
+		/* Set VMMC2 to 3.15 Volts */
+		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC2_DEDICATED,
+					TWL4030_PM_RECEIVER_VMMC2_VSEL_32,
+					TWL4030_PM_RECEIVER_VMMC2_DEV_GRP,
+					TWL4030_PM_RECEIVER_DEV_GRP_P1);
+
+		mdelay(100);	/* ramp-up delay from Linux code */
+	}
 }
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 8f051914f5..af5beba39f 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -132,11 +132,12 @@ static void NS16550_setbrg(NS16550_t com_port, int baud_divisor)
 
 void NS16550_init(NS16550_t com_port, int baud_divisor)
 {
-#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_OMAP34XX))
+#if (defined(CONFIG_SPL_BUILD) && \
+		(defined(CONFIG_OMAP34XX) || defined(CONFIG_OMAP44XX)))
 	/*
-	 * On some OMAP3 devices when UART3 is configured for boot mode before
-	 * SPL starts only THRE bit is set. We have to empty the transmitter
-	 * before initialization starts.
+	 * On some OMAP3/OMAP4 devices when UART3 is configured for boot mode
+	 * before SPL starts only THRE bit is set. We have to empty the
+	 * transmitter before initialization starts.
 	 */
 	if ((serial_in(&com_port->lsr) & (UART_LSR_TEMT | UART_LSR_THRE))
 	     == UART_LSR_THRE) {
diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c
index fd7fea8df5..857b60455a 100644
--- a/drivers/spi/ti_qspi.c
+++ b/drivers/spi/ti_qspi.c
@@ -102,7 +102,7 @@ static void ti_spi_setup_spi_register(struct ti_qspi_slave *qslave)
 	struct spi_slave *slave = &qslave->slave;
 	u32 memval = 0;
 
-#ifdef CONFIG_DRA7XX
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
 	slave->memory_map = (void *)MMAP_START_ADDR_DRA;
 #else
 	slave->memory_map = (void *)MMAP_START_ADDR_AM43x;
@@ -244,7 +244,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 	uint status;
 	int timeout;
 
-#ifdef CONFIG_DRA7XX
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
 	int val;
 #endif
 
@@ -254,7 +254,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 	/* Setup mmap flags */
 	if (flags & SPI_XFER_MMAP) {
 		writel(MM_SWITCH, &qslave->base->memswitch);
-#ifdef CONFIG_DRA7XX
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
 		val = readl(CORE_CTRL_IO);
 		val |= MEM_CS;
 		writel(val, CORE_CTRL_IO);
@@ -262,7 +262,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 		return 0;
 	} else if (flags & SPI_XFER_MMAP_END) {
 		writel(~MM_SWITCH, &qslave->base->memswitch);
-#ifdef CONFIG_DRA7XX
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
 		val = readl(CORE_CTRL_IO);
 		val &= MEM_CS_UNSELECT;
 		writel(val, CORE_CTRL_IO);
diff --git a/drivers/usb/phy/omap_usb_phy.c b/drivers/usb/phy/omap_usb_phy.c
index f78d532966..52a3664b99 100644
--- a/drivers/usb/phy/omap_usb_phy.c
+++ b/drivers/usb/phy/omap_usb_phy.c
@@ -118,7 +118,6 @@ void usb_phy_power(int on)
 void omap_usb3_phy_init(struct omap_usb3_phy *phy_regs)
 {
 	omap_usb_dpll_lock(phy_regs);
-
 	usb3_phy_partial_powerup(phy_regs);
 	/*
 	 * Give enough time for the PHY to partially power-up before
@@ -126,7 +125,6 @@ void omap_usb3_phy_init(struct omap_usb3_phy *phy_regs)
 	 * team.
 	 */
 	mdelay(100);
-	usb3_phy_power(1);
 }
 
 static void omap_enable_usb3_phy(struct omap_xhci *omap)
diff --git a/include/configs/beagle_x15.h b/include/configs/beagle_x15.h
new file mode 100644
index 0000000000..cc36330938
--- /dev/null
+++ b/include/configs/beagle_x15.h
@@ -0,0 +1,88 @@
+/*
+ * (C) Copyright 2014
+ * Texas Instruments Incorporated.
+ * Felipe Balbi <balbi@ti.com>
+ *
+ * Configuration settings for the TI Beagle x15 board.
+ * See ti_omap5_common.h for omap5 common settings.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_BEAGLE_X15_H
+#define __CONFIG_BEAGLE_X15_H
+
+#define CONFIG_AM57XX
+
+#define CONFIG_NR_DRAM_BANKS		2
+
+#define CONFIG_ENV_SIZE			(64 << 10)
+#define CONFIG_ENV_IS_IN_FAT
+#define FAT_ENV_INTERFACE		"mmc"
+#define FAT_ENV_DEVICE_AND_PART		"0:1"
+#define FAT_ENV_FILE			"uboot.env"
+
+#define CONFIG_CMD_SAVEENV
+
+#define CONSOLEDEV			"ttyO2"
+#define CONFIG_SYS_NS16550_COM1		UART1_BASE	/* Base EVM has UART0 */
+#define CONFIG_SYS_NS16550_COM2		UART2_BASE	/* UART2 */
+#define CONFIG_SYS_NS16550_COM3		UART3_BASE	/* UART3 */
+#define CONFIG_BAUDRATE			115200
+
+#define CONFIG_SYS_OMAP_ABE_SYSCK
+
+/* Define the default GPT table for eMMC */
+#define PARTS_DEFAULT \
+	"uuid_disk=${uuid_gpt_disk};" \
+	"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
+
+#include <configs/ti_omap5_common.h>
+
+/* Enhance our eMMC support / experience. */
+#define CONFIG_CMD_GPT
+#define CONFIG_EFI_PARTITION
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_CMD_PART
+
+/* CPSW Ethernet */
+#define CONFIG_CMD_NET			/* 'bootp' and 'tftp' */
+#define CONFIG_CMD_DHCP
+#define CONFIG_BOOTP_DNS		/* Configurable parts of CMD_DHCP */
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_NET_RETRY_COUNT		10
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_MII
+#define CONFIG_DRIVER_TI_CPSW		/* Driver for IP block */
+#define CONFIG_MII			/* Required in net/eth.c */
+#define CONFIG_PHY_GIGE			/* per-board part of CPSW */
+#define CONFIG_PHYLIB
+
+#define CONFIG_SUPPORT_EMMC_BOOT
+
+/* USB xHCI HOST */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_HOST
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_OMAP
+#define CONFIG_USB_STORAGE
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
+
+#define CONFIG_OMAP_USB_PHY
+#define CONFIG_OMAP_USB3PHY1_HOST
+
+/* SATA */
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_CMD_SCSI
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
+#define CONFIG_SYS_SCSI_MAX_LUN		1
+#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+						CONFIG_SYS_SCSI_MAX_LUN)
+
+#endif /* __CONFIG_BEAGLE_X5_H */
diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h
index 641ab48c2c..92ce1e17da 100644
--- a/include/configs/cm_t54.h
+++ b/include/configs/cm_t54.h
@@ -16,7 +16,6 @@
 
 #include <configs/ti_omap5_common.h>
 
-#undef CONFIG_MISC_INIT_R
 #undef CONFIG_SPL_OS_BOOT
 
 /* Enable Generic board */
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 2eaabdefee..174a711bb4 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -50,6 +50,7 @@
 #define CONFIG_EFI_PARTITION
 #define CONFIG_PARTITION_UUIDS
 #define CONFIG_CMD_PART
+#define CONFIG_HSMMC2_8BIT
 
 /* CPSW Ethernet */
 #define CONFIG_CMD_NET			/* 'bootp' and 'tftp' */
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index e8dc462f14..e07795f921 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -23,6 +23,7 @@
 #define CONFIG_SYS_NS16550_COM3		UART3_BASE
 #define CONFIG_BAUDRATE			115200
 
+#define CONFIG_MISC_INIT_R
 /* MMC ENV related defines */
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		1	/* SLOT2: eMMC(1) */
diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h
index d75d562963..946b2c85e9 100644
--- a/include/configs/pxm2.h
+++ b/include/configs/pxm2.h
@@ -150,4 +150,8 @@
 #define CONFIG_SYS_CONSOLE_FG_COL	0x00
 #endif
 
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_FIT
+#endif
+
 #endif	/* ! __CONFIG_PXM2_H */
diff --git a/include/configs/rut.h b/include/configs/rut.h
index 6bddededae..0067ea46e0 100644
--- a/include/configs/rut.h
+++ b/include/configs/rut.h
@@ -154,4 +154,8 @@
 #define CONFIG_SYS_CONSOLE_FG_COL	0x00
 #endif
 
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_FIT
+#endif
+
 #endif	/* ! __CONFIG_RUT_H */
diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
index 3166392c78..c47651d796 100644
--- a/include/configs/ti_omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -19,7 +19,6 @@
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_MISC_INIT_R
 #define CONFIG_ARCH_CPU_INIT
 
 #define CONFIG_SYS_CACHELINE_SIZE	64
@@ -79,7 +78,7 @@
 	"partitions=" PARTS_DEFAULT "\0" \
 	"optargs=\0" \
 	"mmcdev=0\0" \
-	"mmcroot=/dev/mmcblk1p2 rw\0" \
+	"mmcroot=/dev/mmcblk0p2 rw\0" \
 	"mmcrootfstype=ext4 rootwait\0" \
 	"mmcargs=setenv bootargs console=${console} " \
 		"${optargs} " \
@@ -118,6 +117,8 @@
 			"setenv fdtfile dra7-evm.dtb; fi;" \
 		"if test $board_name = dra72x; then " \
 			"setenv fdtfile dra72-evm.dtb; fi;" \
+		"if test $board_name = beagle_x15; then " \
+			"setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
 		"if test $fdtfile = undefined; then " \
 			"echo WARNING: Could not determine device tree to use; fi; \0" \
 	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \
diff --git a/include/linux/usb/xhci-omap.h b/include/linux/usb/xhci-omap.h
index 82630adc71..cb166e6a6c 100644
--- a/include/linux/usb/xhci-omap.h
+++ b/include/linux/usb/xhci-omap.h
@@ -14,6 +14,10 @@
 #define OMAP_XHCI_BASE 0x488d0000
 #define OMAP_OCP1_SCP_BASE 0x4A081000
 #define OMAP_OTG_WRAPPER_BASE 0x488c0000
+#elif defined CONFIG_AM57XX
+#define OMAP_XHCI_BASE 0x48890000
+#define OMAP_OCP1_SCP_BASE 0x4A084c00
+#define OMAP_OTG_WRAPPER_BASE 0x48880000
 #elif defined CONFIG_AM43XX
 #define OMAP_XHCI_BASE 0x483d0000
 #define OMAP_OCP1_SCP_BASE 0x483E8000
diff --git a/include/mmc.h b/include/mmc.h
index d74a190eea..adffc35af0 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -385,6 +385,7 @@ struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode);
 int mmc_legacy_init(int verbose);
 #endif
 
+void board_mmc_power_init(void);
 int board_mmc_init(bd_t *bis);
 int cpu_mmc_init(bd_t *bis);
 int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr);
diff --git a/include/twl4030.h b/include/twl4030.h
index f33cd1eaed..50f8da822a 100644
--- a/include/twl4030.h
+++ b/include/twl4030.h
@@ -651,7 +651,7 @@ void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val,
 /* For initializing power device */
 void twl4030_power_init(void);
 /* For initializing mmc power */
-void twl4030_power_mmc_init(void);
+void twl4030_power_mmc_init(int dev_index);
 
 /*
  * LED