redonkable
/
remarkable-uboot
1
0
Fork 0
Code Releases Activity

* Patch by Steven Scholz, 18 Oct 2003: 

Fix AT91RM9200 ethernet driver

* Patch by Nye Liu, 17 Oct 2003:
  Fix typo in include/mpc8xx.h

* Patch by Richard Woodruff, 16 Oct 03:
  Fixes for cpu/arm925/interrupt.c
  - Initialize timestamp & lastdec vars.
  - fix timestamp overflows.
  - fix lastdec overflow.
  - smarter normalization to allow udelay() below 1ms to work.

* Patch by Scott McNutt, 16 Oct
  add networking support for the Altera Nios Development Kit,
  Cyclone Edition (DK-1C20)

* Patch by Jon Diekema, 14 Oct 2003:
  add hint about doc/README.silent to README file
utp
wdenk 2003-10-19 23:22:11 +00:00
parent d7281f4109
commit a3ad8e26a4
10 changed files with 118 additions and 37 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
CHANGELOG
View File

@ -2,6 +2,26 @@
Changes for U-Boot 1.0.0:
======================================================================
* Patch by Steven Scholz, 18 Oct 2003:
Fix AT91RM9200 ethernet driver
* Patch by Nye Liu, 17 Oct 2003:
Fix typo in include/mpc8xx.h
* Patch by Richard Woodruff, 16 Oct 03:
Fixes for cpu/arm925/interrupt.c
- Initialize timestamp & lastdec vars.
- fix timestamp overflows.
- fix lastdec overflow.
- smarter normalization to allow udelay() below 1ms to work.
* Patch by Scott McNutt, 16 Oct
add networking support for the Altera Nios Development Kit,
Cyclone Edition (DK-1C20)
* Patch by Jon Diekema, 14 Oct 2003:
add hint about doc/README.silent to README file
* Add CompactFlash support for NSCU
* Fix PCI problems on PPChameleonEVB

5
README
View File

@ -487,6 +487,11 @@ The following options need to be configured:
default i/o. Serial console can be forced with
environment 'console=serial'.
When CONFIG_SILENT_CONSOLE is defined, all console
messages (by U-Boot and Linux!) can be silenced with
the "silent" environment variable. See
doc/README.silent for more information.
- Console Baudrate:
CONFIG_BAUDRATE - in bps
Select one of the baudrates listed in

67
cpu/arm925t/interrupts.c
View File

@ -185,9 +185,14 @@ int interrupt_init (void)
{
int32_t val;
/* Start the decrementer ticking down from 0xffffffff */
*((int32_t *) (CFG_TIMERBASE + LOAD_TIM)) = TIMER_LOAD_VAL;
val = MPUTIM_ST | MPUTIM_AR | MPUTIM_CLOCK_ENABLE | (CFG_PVT << MPUTIM_PTV_BIT);
*((int32_t *) (CFG_TIMERBASE + CNTL_TIMER)) = val;
/* init the timestamp and lastdec value */
reset_timer_masked();
return (0);
}
@ -210,7 +215,7 @@ void set_timer (ulong t)
timestamp = t;
}
/* very rough timer... */
/* delay x useconds AND perserve advance timstamp value */
void udelay (unsigned long usec)
{
#ifdef CONFIG_INNOVATOROMAP1510
@ -220,16 +225,24 @@ void udelay (unsigned long usec)
for (i = time_remaining; i > 0; i--) {
}
#else
ulong tmo, tmp;
ulong tmo;
if(usec >= 1000){ /* if "big" number, spread normalization to seconds */
tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */
tmo /= 1000; /* finish normalize. */
}else{ /* else small number, don't kill it prior to HZ multiply */
tmo = usec * CFG_HZ;
tmo /= (1000*1000);
}
tmo = usec / 1000;
tmo *= CFG_HZ;
tmo /= 1000;
tmp = get_timer (0); /* get current timestamp */
if( (tmo + tmp) < tmp ) /* if setting this fordward will roll time stamp */
reset_timer_masked (); /* reset "advancing" timestamp to 0, set lastdec value */
else
tmo += tmp; /* else, set advancing stamp wake up time */
tmo += get_timer (0);
while (get_timer_masked () < tmo)
while (get_timer_masked () < tmo)/* loop till event */
/*NOP*/;
#endif
}
@ -237,19 +250,23 @@ void udelay (unsigned long usec)
void reset_timer_masked (void)
{
/* reset time */
lastdec = READ_TIMER;
timestamp = 0;
lastdec = READ_TIMER; /* capure current decrementer value time */
timestamp = 0; /* start "advancing" time stamp from 0 */
}
ulong get_timer_masked (void)
{
ulong now = READ_TIMER; /* current tick value */
ulong now = READ_TIMER; /* current tick value */
if (lastdec >= now) { /* did I roll (rem decrementer) */
if (lastdec >= now) { /* normal mode (non roll) */
/* normal mode */
timestamp += lastdec - now; /* record amount of time since last check */
} else {
/* we have an overflow ... */
timestamp += lastdec - now; /* move stamp fordward with absoulte diff ticks */
} else { /* we have overflow of the count down timer */
/* nts = ts + ld + (TLV - now)
* ts=old stamp, ld=time that passed before passing through -1
* (TLV-now) amount of time after passing though -1
* nts = new "advancing time stamp"...it could also roll and cause problems.
*/
timestamp += lastdec + TIMER_LOAD_VAL - now;
}
lastdec = now;
@ -257,6 +274,7 @@ ulong get_timer_masked (void)
return timestamp;
}
/* waits specified delay value and resets timestamp */
void udelay_masked (unsigned long usec)
{
#ifdef CONFIG_INNOVATOROMAP1510
@ -265,15 +283,20 @@ void udelay_masked (unsigned long usec)
for (i=time_remaining; i>0; i--) { }
#else
ulong tmo;
ulong tmo, tmp;
tmo = usec / 1000;
tmo *= CFG_HZ;
tmo /= 1000;
if(usec >= 1000){ /* if "big" number, spread normalization to seconds */
tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */
tmo /= 1000; /* finish normalize. */
}else{ /* else small number, don't kill it prior to HZ multiply */
tmo = usec * CFG_HZ;
tmo /= (1000*1000);
}
reset_timer_masked ();
reset_timer_masked (); /* set "advancing" timestamp to 0, set lastdec vaule */
while (get_timer_masked () < tmo)
while (get_timer_masked () < tmo) /* wait for time stamp to overtake tick number.*/
/*NOP*/;
#endif
}
@ -292,7 +315,7 @@ unsigned long long get_ticks(void)
* On ARM it returns the number of timer ticks per second.
*/
ulong get_tbclk (void)
{ /* poor timer, may need to improve especiall for bootp. */
{
ulong tbclk;
tbclk = CFG_HZ;

6
cpu/at91rm9200/at91rm9200_ether.c
View File

@ -334,12 +334,12 @@ static UCHAR at91rm9200_EmacReadPhy (AT91PS_EMAC p_mac,
* TRUE - if data read successfully
*/
static UCHAR at91rm9200_EmacWritePhy (AT91PS_EMAC p_mac,
unsigned char RegisterAddress,
unsigned short *pOutput)
unsigned char RegisterAddress,
unsigned short *pOutput)
{
p_mac->EMAC_MAN = (AT91C_EMAC_HIGH & ~AT91C_EMAC_LOW) |
AT91C_EMAC_CODE_802_3 | AT91C_EMAC_RW_W |
(RegisterAddress << 18);
(RegisterAddress << 18) | *pOutput;
udelay (10000);

7
doc/README.dk1c20
View File

@ -2,7 +2,7 @@
Nios Development Kit
Cyclone Editions
Last Update: October 4, 2003
Last Update: October 15, 2003
====================================================================
This file contains information regarding U-Boot and the Altera
@ -34,7 +34,10 @@ The hello_world example works fine.
Programming U-Boot into FLASH with GERMS
-----------------------------------------
The current version of the DK-1C20 port occupies less than
60 KByte. So everything will fit into a single Flash sector.
60 KByte with network support disabled. So everything will fit
into a single flash sector. With network support (e.g. bootp,
tftpboot, ping, etc) the flash footprint is about 77K.
To program U-Boot into the DK-1C20 flash using GERMS do the
following:

4
doc/README.nios
View File

@ -1,7 +1,7 @@
U-Boot for Nios-32
Last Update: October 4, 2003
Last Update: October 15, 2003
====================================================================
This file contains information regarding U-Boot and the Altera
@ -173,8 +173,6 @@ BTW, thats a 'zero' ... not the letter 'O'.
There are plenty of areas where help is needed. Here's are some ideas
for those interested in contributing:
-SMC 91C111 support. E.g. add in tftpboot, etc.
-CompactFlash. Port & test CF/FAT.
-ASMI support. Use ASMI for environment, etc.

25
drivers/smc91111.h
View File

@ -178,6 +178,31 @@ typedef unsigned long int dword;
})
#endif
#if defined(CONFIG_SMC_USE_32_BIT)
#define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r))))
#define SMC_insl(r,b,l) ({ int __i ; \
dword *__b2; \
__b2 = (dword *) b; \
for (__i = 0; __i < l; __i++) { \
*(__b2 + __i) = SMC_inl(r); \
SMC_inl(0); \
}; \
})
#define SMC_outl(d,r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r))) = d)
#define SMC_outsl(r,b,l) ({ int __i; \
dword *__b2; \
__b2 = (dword *) b; \
for (__i = 0; __i < l; __i++) { \
SMC_outl( *(__b2 + __i), r); \
} \
})
#endif /* CONFIG_SMC_USE_32_BIT */
#endif
/*---------------------------------------------------------------

9
include/configs/DK1C20.h
View File

@ -96,12 +96,10 @@
/*------------------------------------------------------------------------
* Ethernet -- needs work!
*----------------------------------------------------------------------*/
#if 0
#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */
#define CONFIG_SMC91111_BASE 0x00910000 /* Base address */
#undef CONFIG_SMC91111_EXT_PHY /* No external PHY */
#define CONFIG_SMC_USE_32_BIT 1 /* 32-bit i/f */
#endif
#define CONFIG_SMC91111_BASE 0x00910300 /* Base address */
#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
#define CONFIG_SMC_USE_32_BIT /* 32-bit data rd/wr */
#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
#define CONFIG_NETMASK 255.255.255.0
@ -131,7 +129,6 @@
CFG_CMD_JFFS2 | \
CFG_CMD_KGDB | \
CFG_CMD_NAND | \
CFG_CMD_NET | \
CFG_CMD_MMC | \
CFG_CMD_MII | \
CFG_CMD_PCI | \

2
include/mpc8xx.h
View File

@ -138,7 +138,7 @@
#define PLPRCR_MF_MSK 0xffff001e /* Multiplication factor + PDF bits */
#define PLPRCR_MFN_MSK 0xf8000000 /* Multiplication factor numerator bits */
#define PLPRCR_MFN_SHIFT 0x0000001b /* Multiplication factor numerator shift*/
#define PLPRCR_MFD_MSK 0x03c00000 /* Multiplication factor denominator bits */
#define PLPRCR_MFD_MSK 0x07c00000 /* Multiplication factor denominator bits */
#define PLPRCR_MFD_SHIFT 0x00000017 /* Multiplication factor denominator shift*/
#define PLPRCR_S_MSK 0x00300000 /* Multiplication factor integer bits */
#define PLPRCR_S_SHIFT 0x00000014 /* Multiplication factor integer shift */

10
lib_nios/board.c
View File

@ -27,6 +27,7 @@
#include <common.h>
#include <devices.h>
#include <watchdog.h>
#include <net.h>
/*
@ -107,6 +108,8 @@ void board_init (void)
bd_t *bd;
init_fnc_t **init_fnc_ptr;
char *s, *e;
int i;
/* Pointer is writable since we allocated a register for it.
* Nios treats CFG_GBL_DATA_OFFSET as an address.
@ -129,6 +132,12 @@ void board_init (void)
bd->bi_sramstart= CFG_SRAM_BASE;
bd->bi_sramsize = CFG_SRAM_SIZE;
bd->bi_baudrate = CONFIG_BAUDRATE;
bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
s = getenv ("ethaddr");
for (i = 0; i < 6; ++i) {
bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0;
if (s) s = (*e) ? e + 1 : e;
}
for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
if ((*init_fnc_ptr) () != 0) {
@ -164,3 +173,4 @@ void hang (void)
puts("### ERROR ### Please reset board ###\n");
for (;;);
}