arm: Remove enbw_cmc board
This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>utp
Simon Glass
Tom Rini
parent
5522f12b3c
commit
a6f7f78744
|
|
@ -4,9 +4,6 @@ choice
|
|||
prompt "DaVinci board select"
|
||||
optional
|
||||
|
||||
config TARGET_ENBW_CMC
|
||||
bool "EnBW CMC board"
|
||||
|
||||
config TARGET_IPAM390
|
||||
bool "IPAM390 board"
|
||||
select SUPPORT_SPL
|
||||
|
|
@ -33,7 +30,6 @@ endchoice
|
|||
config SYS_SOC
|
||||
default "davinci"
|
||||
|
||||
source "board/enbw/enbw_cmc/Kconfig"
|
||||
source "board/Barix/ipam390/Kconfig"
|
||||
source "board/davinci/da8xxevm/Kconfig"
|
||||
source "board/davinci/ea20/Kconfig"
|
||||
|
|
|
|||
|
|
@ -1,12 +0,0 @@
|
|||
if TARGET_ENBW_CMC
|
||||
|
||||
config SYS_BOARD
|
||||
default "enbw_cmc"
|
||||
|
||||
config SYS_VENDOR
|
||||
default "enbw"
|
||||
|
||||
config SYS_CONFIG_NAME
|
||||
default "enbw_cmc"
|
||||
|
||||
endif
|
||||
|
|
@ -1,6 +0,0 @@
|
|||
ENBW_CMC BOARD
|
||||
M: Heiko Schocher <hs@denx.de>
|
||||
S: Maintained
|
||||
F: board/enbw/enbw_cmc/
|
||||
F: include/configs/enbw_cmc.h
|
||||
F: configs/enbw_cmc_defconfig
|
||||
|
|
@ -1,10 +0,0 @@
|
|||
#
|
||||
# (C) Copyright 2000, 2001, 2002
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y := enbw_cmc.o
|
||||
|
|
@ -1,893 +0,0 @@
|
|||
/*
|
||||
* (C) Copyright 2011
|
||||
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
||||
*
|
||||
* Based on:
|
||||
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* Based on da830evm.c. Original Copyrights follow:
|
||||
*
|
||||
* Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com>
|
||||
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <command.h>
|
||||
#include <environment.h>
|
||||
#include <hwconfig.h>
|
||||
#include <i2c.h>
|
||||
#include <malloc.h>
|
||||
#include <miiphy.h>
|
||||
#include <mmc.h>
|
||||
#include <net.h>
|
||||
#include <netdev.h>
|
||||
#include <spi.h>
|
||||
#include <linux/ctype.h>
|
||||
#include <asm/gpio.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/da850_lowlevel.h>
|
||||
#include <asm/arch/davinci_misc.h>
|
||||
#include <asm/ti-common/davinci_nand.h>
|
||||
#include <asm/arch/emac_defs.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
#include <asm/arch/pinmux_defs.h>
|
||||
#include <asm/arch/hardware.h>
|
||||
#include <asm/arch/sdmmc_defs.h>
|
||||
#include <asm/arch/timer_defs.h>
|
||||
#include <asm/davinci_rtc.h>
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
const struct lpsc_resource lpsc[] = {
|
||||
{ DAVINCI_LPSC_AEMIF },
|
||||
{ DAVINCI_LPSC_SPI1 },
|
||||
{ DAVINCI_LPSC_ARM_RAM_ROM },
|
||||
{ DAVINCI_LPSC_UART0 },
|
||||
{ DAVINCI_LPSC_EMAC },
|
||||
{ DAVINCI_LPSC_UART0 },
|
||||
{ DAVINCI_LPSC_GPIO },
|
||||
{ DAVINCI_LPSC_DDR_EMIF },
|
||||
{ DAVINCI_LPSC_UART1 },
|
||||
{ DAVINCI_LPSC_UART2 },
|
||||
{ DAVINCI_LPSC_MMC_SD1 },
|
||||
{ DAVINCI_LPSC_USB20 },
|
||||
{ DAVINCI_LPSC_USB11 },
|
||||
};
|
||||
|
||||
const int lpsc_size = ARRAY_SIZE(lpsc);
|
||||
|
||||
static const struct pinmux_config enbw_pins[] = {
|
||||
{ pinmux(0), 8, 0 },
|
||||
{ pinmux(0), 8, 1 },
|
||||
{ pinmux(0), 8, 2 },
|
||||
{ pinmux(0), 8, 3 },
|
||||
{ pinmux(0), 8, 4 },
|
||||
{ pinmux(0), 8, 5 },
|
||||
{ pinmux(1), 4, 0 },
|
||||
{ pinmux(1), 8, 1 },
|
||||
{ pinmux(1), 8, 2 },
|
||||
{ pinmux(1), 8, 3 },
|
||||
{ pinmux(1), 8, 4 },
|
||||
{ pinmux(1), 8, 5 },
|
||||
{ pinmux(1), 8, 6 },
|
||||
{ pinmux(1), 4, 7 },
|
||||
{ pinmux(2), 8, 0 },
|
||||
{ pinmux(5), 1, 0 },
|
||||
{ pinmux(5), 1, 3 },
|
||||
{ pinmux(5), 1, 7 },
|
||||
{ pinmux(5), 1, 5 },
|
||||
{ pinmux(5), 1, 4 },
|
||||
{ pinmux(5), 1, 3 },
|
||||
{ pinmux(5), 1, 2 },
|
||||
{ pinmux(5), 1, 1 },
|
||||
{ pinmux(5), 1, 0 },
|
||||
{ pinmux(6), 8, 0 },
|
||||
{ pinmux(6), 8, 1 },
|
||||
{ pinmux(6), 8, 2 },
|
||||
{ pinmux(6), 8, 3 },
|
||||
{ pinmux(6), 8, 4 },
|
||||
{ pinmux(6), 8, 5 },
|
||||
{ pinmux(6), 1, 7 },
|
||||
{ pinmux(7), 8, 2 },
|
||||
{ pinmux(7), 1, 3 },
|
||||
{ pinmux(7), 8, 6 },
|
||||
{ pinmux(7), 1, 7 },
|
||||
{ pinmux(13), 8, 2 },
|
||||
{ pinmux(13), 8, 3 },
|
||||
{ pinmux(13), 8, 4 },
|
||||
{ pinmux(13), 8, 5 },
|
||||
{ pinmux(13), 8, 6 },
|
||||
{ pinmux(13), 8, 7 },
|
||||
{ pinmux(14), 8, 0 },
|
||||
{ pinmux(14), 8, 1 },
|
||||
{ pinmux(16), 8, 1 },
|
||||
{ pinmux(16), 8, 2 },
|
||||
{ pinmux(16), 8, 3 },
|
||||
{ pinmux(16), 8, 4 },
|
||||
{ pinmux(16), 8, 5 },
|
||||
{ pinmux(16), 8, 6 },
|
||||
{ pinmux(16), 8, 7 },
|
||||
{ pinmux(17), 1, 0 },
|
||||
{ pinmux(17), 1, 1 },
|
||||
{ pinmux(17), 1, 2 },
|
||||
{ pinmux(17), 8, 3 },
|
||||
{ pinmux(17), 8, 4 },
|
||||
{ pinmux(17), 8, 5 },
|
||||
{ pinmux(17), 8, 6 },
|
||||
{ pinmux(17), 8, 7 },
|
||||
{ pinmux(18), 8, 0 },
|
||||
{ pinmux(18), 8, 1 },
|
||||
{ pinmux(18), 2, 2 },
|
||||
{ pinmux(18), 2, 3 },
|
||||
{ pinmux(18), 2, 4 },
|
||||
{ pinmux(18), 8, 6 },
|
||||
{ pinmux(18), 8, 7 },
|
||||
{ pinmux(19), 8, 0 },
|
||||
{ pinmux(19), 2, 1 },
|
||||
{ pinmux(19), 2, 2 },
|
||||
{ pinmux(19), 2, 3 },
|
||||
{ pinmux(19), 2, 4 },
|
||||
{ pinmux(19), 8, 5 },
|
||||
{ pinmux(19), 8, 6 },
|
||||
};
|
||||
|
||||
const struct pinmux_resource pinmuxes[] = {
|
||||
PINMUX_ITEM(emac_pins_mii),
|
||||
PINMUX_ITEM(emac_pins_mdio),
|
||||
PINMUX_ITEM(i2c0_pins),
|
||||
PINMUX_ITEM(emifa_pins_cs2),
|
||||
PINMUX_ITEM(emifa_pins_cs3),
|
||||
PINMUX_ITEM(emifa_pins_cs4),
|
||||
PINMUX_ITEM(emifa_pins_nand),
|
||||
PINMUX_ITEM(emifa_pins_nor),
|
||||
PINMUX_ITEM(spi1_pins_base),
|
||||
PINMUX_ITEM(spi1_pins_scs0),
|
||||
PINMUX_ITEM(uart1_pins_txrx),
|
||||
PINMUX_ITEM(uart2_pins_txrx),
|
||||
PINMUX_ITEM(uart2_pins_rtscts),
|
||||
PINMUX_ITEM(enbw_pins),
|
||||
};
|
||||
|
||||
const int pinmuxes_size = ARRAY_SIZE(pinmuxes);
|
||||
|
||||
struct gpio_config {
|
||||
char name[GPIO_NAME_SIZE];
|
||||
unsigned char bank;
|
||||
unsigned char gpio;
|
||||
unsigned char out;
|
||||
unsigned char value;
|
||||
};
|
||||
|
||||
static const struct gpio_config enbw_gpio_config_hut[] = {
|
||||
{ "RS485 enable", 8, 11, 1, 0 },
|
||||
{ "RS485 iso", 8, 10, 1, 1 },
|
||||
{ "W2HUT RS485 Rx ena", 8, 9, 1, 0 },
|
||||
{ "W2HUT RS485 iso", 8, 8, 1, 1 },
|
||||
};
|
||||
|
||||
static const struct gpio_config enbw_gpio_config_w[] = {
|
||||
{ "RS485 enable", 8, 11, 1, 0 },
|
||||
{ "RS485 iso", 8, 10, 1, 0 },
|
||||
{ "W2HUT RS485 Rx ena", 8, 9, 1, 0 },
|
||||
{ "W2HUT RS485 iso", 8, 8, 1, 0 },
|
||||
};
|
||||
|
||||
static const struct gpio_config enbw_gpio_config[] = {
|
||||
{ "LAN reset", 7, 15, 1, 1 },
|
||||
{ "ena 11V PLC", 7, 14, 1, 0 },
|
||||
{ "ena 1.5V PLC", 7, 13, 1, 0 },
|
||||
{ "disable VBUS", 7, 12, 1, 1 },
|
||||
{ "PLC reset", 6, 13, 1, 0 },
|
||||
{ "LCM RS", 6, 12, 1, 0 },
|
||||
{ "LCM R/W", 6, 11, 1, 0 },
|
||||
{ "PLC pairing", 6, 10, 1, 1 },
|
||||
{ "PLC MDIO CLK", 6, 9, 1, 0 },
|
||||
{ "HK218", 6, 8, 1, 0 },
|
||||
{ "HK218 Rx", 6, 1, 1, 1 },
|
||||
{ "TPM reset", 6, 0, 1, 0 },
|
||||
{ "Board-Type", 3, 9, 0, 0 },
|
||||
{ "HW-ID0", 2, 7, 0, 0 },
|
||||
{ "HW-ID1", 2, 6, 0, 0 },
|
||||
{ "HW-ID2", 2, 3, 0, 0 },
|
||||
{ "PV-IF RxD ena", 0, 15, 1, 1 },
|
||||
{ "LED1", 1, 15, 1, 1 },
|
||||
{ "LED2", 0, 1, 1, 1 },
|
||||
{ "LED3", 0, 2, 1, 1 },
|
||||
{ "LED4", 0, 3, 1, 1 },
|
||||
{ "LED5", 0, 4, 1, 1 },
|
||||
{ "LED6", 0, 5, 1, 0 },
|
||||
{ "LED7", 0, 6, 1, 0 },
|
||||
{ "LED8", 0, 14, 1, 0 },
|
||||
{ "USER1", 0, 12, 0, 0 },
|
||||
{ "USER2", 0, 13, 0, 0 },
|
||||
};
|
||||
|
||||
#define PHY_POWER 0x0800
|
||||
|
||||
static void enbw_cmc_switch(int port, int on)
|
||||
{
|
||||
const char *devname;
|
||||
unsigned char phyaddr = 3;
|
||||
unsigned char reg = 0;
|
||||
unsigned short data;
|
||||
|
||||
if (port == 1)
|
||||
phyaddr = 2;
|
||||
|
||||
devname = miiphy_get_current_dev();
|
||||
if (!devname) {
|
||||
printf("Error: no mii device\n");
|
||||
return;
|
||||
}
|
||||
if (miiphy_read(devname, phyaddr, reg, &data) != 0) {
|
||||
printf("Error reading from the PHY addr=%02x reg=%02x\n",
|
||||
phyaddr, reg);
|
||||
return;
|
||||
}
|
||||
|
||||
if (on)
|
||||
data &= ~PHY_POWER;
|
||||
else
|
||||
data |= PHY_POWER;
|
||||
|
||||
if (miiphy_write(devname, phyaddr, reg, data) != 0) {
|
||||
printf("Error writing to the PHY addr=%02x reg=%02x\n",
|
||||
phyaddr, reg);
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
static int enbw_cmc_init_gpio(const struct gpio_config *conf, int sz)
|
||||
{
|
||||
int i, ret;
|
||||
|
||||
for (i = 0; i < sz; i++) {
|
||||
int gpio = conf[i].bank * 16 +
|
||||
conf[i].gpio;
|
||||
|
||||
ret = gpio_request(gpio, conf[i].name);
|
||||
if (ret) {
|
||||
printf("%s: Could not get %s gpio\n", __func__,
|
||||
conf[i].name);
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (conf[i].out)
|
||||
gpio_direction_output(gpio,
|
||||
conf[i].value);
|
||||
else
|
||||
gpio_direction_input(gpio);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
int board_type, hw_id;
|
||||
|
||||
#ifndef CONFIG_USE_IRQ
|
||||
irq_init();
|
||||
#endif
|
||||
/* address of boot parameters, not used as booting with DTT */
|
||||
gd->bd->bi_boot_params = 0;
|
||||
|
||||
enbw_cmc_init_gpio(enbw_gpio_config, ARRAY_SIZE(enbw_gpio_config));
|
||||
|
||||
/* detect HW version */
|
||||
board_type = gpio_get_value(CONFIG_ENBW_CMC_BOARD_TYPE);
|
||||
hw_id = gpio_get_value(CONFIG_ENBW_CMC_HW_ID_BIT0) +
|
||||
(gpio_get_value(CONFIG_ENBW_CMC_HW_ID_BIT1) << 1) +
|
||||
(gpio_get_value(CONFIG_ENBW_CMC_HW_ID_BIT2) << 2);
|
||||
printf("BOARD: CMC-%s hw id: %d\n", (board_type ? "w2" : "hut"),
|
||||
hw_id);
|
||||
if (board_type)
|
||||
enbw_cmc_init_gpio(enbw_gpio_config_w,
|
||||
ARRAY_SIZE(enbw_gpio_config_w));
|
||||
else
|
||||
enbw_cmc_init_gpio(enbw_gpio_config_hut,
|
||||
ARRAY_SIZE(enbw_gpio_config_hut));
|
||||
|
||||
/* setup the SUSPSRC for ARM to control emulation suspend */
|
||||
clrbits_le32(&davinci_syscfg_regs->suspsrc,
|
||||
(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C |
|
||||
DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 |
|
||||
DAVINCI_SYSCFG_SUSPSRC_UART2));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_DRIVER_TI_EMAC
|
||||
|
||||
#define KSZ_CMD_READ 0x03
|
||||
#define KSZ_CMD_WRITE 0x02
|
||||
#define KSZ_ID 0x95
|
||||
|
||||
static int enbw_cmc_switch_read(struct spi_slave *spi, u8 reg, u8 *val)
|
||||
{
|
||||
unsigned long flags = SPI_XFER_BEGIN;
|
||||
int ret;
|
||||
int cmd_len;
|
||||
u8 cmd[2];
|
||||
|
||||
cmd[0] = KSZ_CMD_READ;
|
||||
cmd[1] = reg;
|
||||
cmd_len = 2;
|
||||
|
||||
ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags);
|
||||
if (ret) {
|
||||
debug("Failed to send command (%zu bytes): %d\n",
|
||||
cmd_len, ret);
|
||||
return -EINVAL;
|
||||
}
|
||||
flags |= SPI_XFER_END;
|
||||
*val = 0;
|
||||
cmd_len = 1;
|
||||
ret = spi_xfer(spi, cmd_len * 8, NULL, val, flags);
|
||||
if (ret) {
|
||||
debug("Failed to read (%zu bytes): %d\n",
|
||||
cmd_len, ret);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int enbw_cmc_switch_read_ident(struct spi_slave *spi)
|
||||
{
|
||||
int ret;
|
||||
u8 val;
|
||||
|
||||
ret = enbw_cmc_switch_read(spi, 0, &val);
|
||||
if (ret) {
|
||||
debug("Failed to read\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (val != KSZ_ID)
|
||||
return -EINVAL;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int enbw_cmc_switch_write(struct spi_slave *spi, unsigned long reg,
|
||||
unsigned long val)
|
||||
{
|
||||
unsigned long flags = SPI_XFER_BEGIN;
|
||||
int ret;
|
||||
int cmd_len;
|
||||
u8 cmd[3];
|
||||
|
||||
cmd[0] = KSZ_CMD_WRITE;
|
||||
cmd[1] = reg;
|
||||
cmd[2] = val;
|
||||
cmd_len = 3;
|
||||
flags |= SPI_XFER_END;
|
||||
|
||||
ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags);
|
||||
if (ret) {
|
||||
debug("Failed to send command (%zu bytes): %d\n",
|
||||
cmd_len, ret);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
udelay(1000);
|
||||
ret = enbw_cmc_switch_read(spi, reg, &cmd[0]);
|
||||
if (ret) {
|
||||
debug("Failed to read\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
if (val != cmd[0])
|
||||
debug("warning: reg: %lx va: %x soll: %lx\n",
|
||||
reg, cmd[0], val);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int enbw_cmc_eof(unsigned char *ptr)
|
||||
{
|
||||
if (*ptr == 0xff)
|
||||
return 1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static char *enbw_cmc_getnewline(char *ptr)
|
||||
{
|
||||
while (*ptr != 0x0a) {
|
||||
ptr++;
|
||||
if (enbw_cmc_eof((unsigned char *)ptr))
|
||||
return NULL;
|
||||
}
|
||||
|
||||
ptr++;
|
||||
return ptr;
|
||||
}
|
||||
|
||||
static char *enbw_cmc_getvalue(char *ptr, int *value)
|
||||
{
|
||||
int end = 0;
|
||||
|
||||
*value = -EINVAL;
|
||||
|
||||
if (!isxdigit(*ptr))
|
||||
end = 1;
|
||||
|
||||
while (end) {
|
||||
if ((*ptr == '#') || (*ptr == ';')) {
|
||||
ptr = enbw_cmc_getnewline(ptr);
|
||||
return ptr;
|
||||
}
|
||||
if (ptr != NULL) {
|
||||
if (isxdigit(*ptr)) {
|
||||
end = 0;
|
||||
} else if (*ptr == 0x0a) {
|
||||
ptr++;
|
||||
return ptr;
|
||||
} else {
|
||||
ptr++;
|
||||
if (enbw_cmc_eof((unsigned char *)ptr))
|
||||
return NULL;
|
||||
}
|
||||
} else {
|
||||
return NULL;
|
||||
}
|
||||
}
|
||||
*value = (int)simple_strtoul((const char *)ptr, &ptr, 16);
|
||||
ptr++;
|
||||
return ptr;
|
||||
}
|
||||
|
||||
static struct spi_slave *enbw_cmc_init_spi(void)
|
||||
{
|
||||
struct spi_slave *spi;
|
||||
int ret;
|
||||
|
||||
spi = spi_setup_slave(0, 0, 1000000, 0);
|
||||
if (!spi) {
|
||||
printf("Failed to set up slave\n");
|
||||
return NULL;
|
||||
}
|
||||
|
||||
ret = spi_claim_bus(spi);
|
||||
if (ret) {
|
||||
debug("Failed to claim SPI bus: %d\n", ret);
|
||||
goto err_claim_bus;
|
||||
}
|
||||
|
||||
ret = enbw_cmc_switch_read_ident(spi);
|
||||
if (ret)
|
||||
goto err_read;
|
||||
|
||||
return spi;
|
||||
err_read:
|
||||
spi_release_bus(spi);
|
||||
err_claim_bus:
|
||||
spi_free_slave(spi);
|
||||
return NULL;
|
||||
}
|
||||
|
||||
static int enbw_cmc_config_switch(unsigned long addr)
|
||||
{
|
||||
struct spi_slave *spi;
|
||||
char *ptr = (char *)addr;
|
||||
int value, reg;
|
||||
int ret = 0;
|
||||
|
||||
debug("configure switch with file on addr: 0x%lx\n", addr);
|
||||
|
||||
spi = enbw_cmc_init_spi();
|
||||
if (!spi)
|
||||
return -EINVAL;
|
||||
|
||||
while (ptr != NULL) {
|
||||
ptr = enbw_cmc_getvalue(ptr, ®);
|
||||
if (ptr != NULL) {
|
||||
ptr = enbw_cmc_getvalue(ptr, &value);
|
||||
if ((ptr != NULL) && (value >= 0))
|
||||
if (enbw_cmc_switch_write(spi, reg, value)) {
|
||||
/* error writing to switch */
|
||||
ptr = NULL;
|
||||
ret = -EINVAL;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
spi_release_bus(spi);
|
||||
spi_free_slave(spi);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int do_switch(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
|
||||
{
|
||||
unsigned long addr;
|
||||
|
||||
if (argc < 2)
|
||||
return cmd_usage(cmdtp);
|
||||
|
||||
addr = simple_strtoul(argv[1], NULL, 16);
|
||||
enbw_cmc_config_switch(addr);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
U_BOOT_CMD(switch, 3, 1, do_switch,
|
||||
"switch addr",
|
||||
"[addr]"
|
||||
);
|
||||
|
||||
/*
|
||||
* Initializes on-board ethernet controllers.
|
||||
*/
|
||||
int board_eth_init(bd_t *bis)
|
||||
{
|
||||
struct spi_slave *spi;
|
||||
const char *s;
|
||||
size_t len = 0;
|
||||
int config = 1;
|
||||
|
||||
davinci_emac_mii_mode_sel(0);
|
||||
|
||||
/* send a config file to the switch */
|
||||
s = hwconfig_subarg("switch", "config", &len);
|
||||
if (len) {
|
||||
unsigned long addr = simple_strtoul(s, NULL, 16);
|
||||
|
||||
config = enbw_cmc_config_switch(addr);
|
||||
}
|
||||
|
||||
if (config) {
|
||||
/*
|
||||
* no valid config file -> do we have some args in
|
||||
* hwconfig ?
|
||||
*/
|
||||
if ((hwconfig_subarg("switch", "lan", &len)) ||
|
||||
(hwconfig_subarg("switch", "lmn", &len))) {
|
||||
/* If so start switch */
|
||||
spi = enbw_cmc_init_spi();
|
||||
if (spi) {
|
||||
if (enbw_cmc_switch_write(spi, 1, 0))
|
||||
config = 0;
|
||||
udelay(10000);
|
||||
if (enbw_cmc_switch_write(spi, 1, 1))
|
||||
config = 0;
|
||||
spi_release_bus(spi);
|
||||
spi_free_slave(spi);
|
||||
}
|
||||
} else {
|
||||
config = 0;
|
||||
}
|
||||
}
|
||||
if (!davinci_emac_initialize()) {
|
||||
printf("Error: Ethernet init failed!\n");
|
||||
return -1;
|
||||
}
|
||||
|
||||
if (config) {
|
||||
if (hwconfig_subarg_cmp("switch", "lan", "on"))
|
||||
/* Switch port lan on */
|
||||
enbw_cmc_switch(1, 1);
|
||||
else
|
||||
enbw_cmc_switch(1, 0);
|
||||
|
||||
if (hwconfig_subarg_cmp("switch", "lmn", "on"))
|
||||
/* Switch port pwl on */
|
||||
enbw_cmc_switch(2, 1);
|
||||
else
|
||||
enbw_cmc_switch(2, 0);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif /* CONFIG_DRIVER_TI_EMAC */
|
||||
|
||||
#ifdef CONFIG_PREBOOT
|
||||
static uchar kbd_magic_prefix[] = "key_magic_";
|
||||
static uchar kbd_command_prefix[] = "key_cmd_";
|
||||
|
||||
struct kbd_data_t {
|
||||
char s1;
|
||||
};
|
||||
|
||||
struct kbd_data_t *get_keys(struct kbd_data_t *kbd_data)
|
||||
{
|
||||
/* read SW1 + SW2 */
|
||||
kbd_data->s1 = gpio_get_value(12) +
|
||||
(gpio_get_value(13) << 1);
|
||||
return kbd_data;
|
||||
}
|
||||
|
||||
static int compare_magic(const struct kbd_data_t *kbd_data, char *str)
|
||||
{
|
||||
char s1 = str[0];
|
||||
|
||||
if (s1 >= '0' && s1 <= '9')
|
||||
s1 -= '0';
|
||||
else if (s1 >= 'a' && s1 <= 'f')
|
||||
s1 = s1 - 'a' + 10;
|
||||
else if (s1 >= 'A' && s1 <= 'F')
|
||||
s1 = s1 - 'A' + 10;
|
||||
else
|
||||
return -1;
|
||||
|
||||
if (s1 != kbd_data->s1)
|
||||
return -1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static char *key_match(const struct kbd_data_t *kbd_data)
|
||||
{
|
||||
char magic[sizeof(kbd_magic_prefix) + 1];
|
||||
char *suffix;
|
||||
char *kbd_magic_keys;
|
||||
|
||||
/*
|
||||
* The following string defines the characters that can be appended
|
||||
* to "key_magic" to form the names of environment variables that
|
||||
* hold "magic" key codes, i. e. such key codes that can cause
|
||||
* pre-boot actions. If the string is empty (""), then only
|
||||
* "key_magic" is checked (old behaviour); the string "125" causes
|
||||
* checks for "key_magic1", "key_magic2" and "key_magic5", etc.
|
||||
*/
|
||||
kbd_magic_keys = getenv("magic_keys");
|
||||
if (kbd_magic_keys == NULL)
|
||||
kbd_magic_keys = "";
|
||||
|
||||
/*
|
||||
* loop over all magic keys;
|
||||
* use '\0' suffix in case of empty string
|
||||
*/
|
||||
for (suffix = kbd_magic_keys; *suffix ||
|
||||
suffix == kbd_magic_keys; ++suffix) {
|
||||
sprintf(magic, "%s%c", kbd_magic_prefix, *suffix);
|
||||
|
||||
if (compare_magic(kbd_data, getenv(magic)) == 0) {
|
||||
char cmd_name[sizeof(kbd_command_prefix) + 1];
|
||||
char *cmd;
|
||||
|
||||
sprintf(cmd_name, "%s%c", kbd_command_prefix, *suffix);
|
||||
cmd = getenv(cmd_name);
|
||||
|
||||
return cmd;
|
||||
}
|
||||
}
|
||||
|
||||
return NULL;
|
||||
}
|
||||
#endif /* CONFIG_PREBOOT */
|
||||
|
||||
int misc_init_r(void)
|
||||
{
|
||||
char *s, buf[32];
|
||||
#ifdef CONFIG_PREBOOT
|
||||
struct kbd_data_t kbd_data;
|
||||
/* Decode keys */
|
||||
char *str = strdup(key_match(get_keys(&kbd_data)));
|
||||
/* Set or delete definition */
|
||||
setenv("preboot", str);
|
||||
free(str);
|
||||
#endif /* CONFIG_PREBOOT */
|
||||
|
||||
/* count all restarts, and save this in an environment var */
|
||||
s = getenv("restartcount");
|
||||
|
||||
if (s)
|
||||
sprintf(buf, "%ld", simple_strtoul(s, NULL, 10) + 1);
|
||||
else
|
||||
strcpy(buf, "1");
|
||||
|
||||
setenv("restartcount", buf);
|
||||
saveenv();
|
||||
|
||||
#ifdef CONFIG_HW_WATCHDOG
|
||||
davinci_hw_watchdog_enable();
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
struct cmc_led {
|
||||
char name[20];
|
||||
unsigned char bank;
|
||||
unsigned char gpio;
|
||||
};
|
||||
|
||||
struct cmc_led led_table[] = {
|
||||
{"led1", 1, 15},
|
||||
{"led2", 0, 1},
|
||||
{"led3", 0, 2},
|
||||
{"led4", 0, 3},
|
||||
{"led5", 0, 4},
|
||||
{"led6", 0, 5},
|
||||
{"led7", 0, 6},
|
||||
{"led8", 0, 14},
|
||||
};
|
||||
|
||||
static int cmc_get_led_state(struct cmc_led *led)
|
||||
{
|
||||
int value;
|
||||
int gpio = led->bank * 16 + led->gpio;
|
||||
|
||||
value = gpio_get_value(gpio);
|
||||
|
||||
return value;
|
||||
}
|
||||
|
||||
static int cmc_set_led_state(struct cmc_led *led, int state)
|
||||
{
|
||||
int gpio = led->bank * 16 + led->gpio;
|
||||
|
||||
gpio_set_value(gpio, state);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int do_led(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
|
||||
{
|
||||
struct cmc_led *led;
|
||||
int found = 0;
|
||||
int i = 0;
|
||||
int only_print = 0;
|
||||
int len = ARRAY_SIZE(led_table);
|
||||
|
||||
if (argc < 2)
|
||||
return cmd_usage(cmdtp);
|
||||
|
||||
if (argc < 3)
|
||||
only_print = 1;
|
||||
|
||||
led = led_table;
|
||||
while ((!found) && (i < len)) {
|
||||
if (strcmp(argv[1], led->name) == 0) {
|
||||
found = 1;
|
||||
} else {
|
||||
led++;
|
||||
i++;
|
||||
}
|
||||
}
|
||||
if (!found)
|
||||
return cmd_usage(cmdtp);
|
||||
|
||||
if (only_print) {
|
||||
if (cmc_get_led_state(led))
|
||||
printf("on\n");
|
||||
else
|
||||
printf("off\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
if (strcmp(argv[2], "on") == 0)
|
||||
cmc_set_led_state(led, 1);
|
||||
else
|
||||
cmc_set_led_state(led, 0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
U_BOOT_CMD(led, 3, 1, do_led,
|
||||
"switch on/off board led",
|
||||
"[name] [on/off]"
|
||||
);
|
||||
|
||||
#ifdef CONFIG_HW_WATCHDOG
|
||||
void hw_watchdog_reset(void)
|
||||
{
|
||||
davinci_hw_watchdog_reset();
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_POST)
|
||||
void arch_memory_failure_handle(void)
|
||||
{
|
||||
struct davinci_gpio *gpio = davinci_gpio_bank01;
|
||||
int state = 1;
|
||||
|
||||
/*
|
||||
* if memor< failure blink with the LED 1,2 and 3
|
||||
* as we running from flash, we cannot use the gpio
|
||||
* api here, so access the gpio pin direct through
|
||||
* the gpio register.
|
||||
*/
|
||||
while (1) {
|
||||
if (state) {
|
||||
clrbits_le32(&gpio->out_data, 0x80000006);
|
||||
state = 0;
|
||||
} else {
|
||||
setbits_le32(&gpio->out_data, 0x80000006);
|
||||
state = 1;
|
||||
}
|
||||
udelay(500);
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
ulong post_word_load(void)
|
||||
{
|
||||
struct davinci_rtc *reg =
|
||||
(struct davinci_rtc *)CONFIG_SYS_POST_WORD_ADDR;
|
||||
|
||||
return in_be32(®->scratch2);
|
||||
}
|
||||
|
||||
void post_word_store(ulong value)
|
||||
{
|
||||
struct davinci_rtc *reg =
|
||||
(struct davinci_rtc *)CONFIG_SYS_POST_WORD_ADDR;
|
||||
|
||||
/*
|
||||
* write RTC kick register to enable write
|
||||
* for RTC Scratch registers. Cratch0 and 1 are
|
||||
* used for bootcount values.
|
||||
*/
|
||||
writel(RTC_KICK0R_WE, ®->kick0r);
|
||||
writel(RTC_KICK1R_WE, ®->kick1r);
|
||||
out_be32(®->scratch2, value);
|
||||
}
|
||||
|
||||
void board_gpio_init(void)
|
||||
{
|
||||
struct davinci_gpio *gpio = davinci_gpio_bank01;
|
||||
|
||||
/*
|
||||
* set LED (gpio Interface not usable here)
|
||||
* set LED pins to output and state 0
|
||||
*/
|
||||
clrbits_le32(&gpio->dir, 0x8000407e);
|
||||
clrbits_le32(&gpio->out_data, 0x8000407e);
|
||||
/* set LED 1 - 5 to state on */
|
||||
setbits_le32(&gpio->out_data, 0x8000001e);
|
||||
|
||||
/*
|
||||
* set some gpio pins to low, this is needed early,
|
||||
* so we have no gpio Interface here
|
||||
* gpios:
|
||||
* 8[8] Mode PV select low
|
||||
* 8[9] Debug Rx Enable low
|
||||
* 8[10] Mode Select PV low
|
||||
* 8[11] Counter Interface RS485 Rx-Enable low
|
||||
*/
|
||||
gpio = davinci_gpio_bank8;
|
||||
clrbits_le32(&gpio->dir, 0x00000f00);
|
||||
clrbits_le32(&gpio->out_data, 0x0f00);
|
||||
}
|
||||
|
||||
int board_late_init(void)
|
||||
{
|
||||
cmc_set_led_state(&led_table[4], 0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void show_boot_progress(int val)
|
||||
{
|
||||
switch (val) {
|
||||
case 1:
|
||||
cmc_set_led_state(&led_table[4], 1);
|
||||
break;
|
||||
case 4:
|
||||
cmc_set_led_state(&led_table[4], 0);
|
||||
break;
|
||||
case 15:
|
||||
cmc_set_led_state(&led_table[4], 1);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef CONFIG_DAVINCI_MMC
|
||||
static struct davinci_mmc mmc_sd1 = {
|
||||
.reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD1_BASE,
|
||||
.input_clk = 228000000,
|
||||
.host_caps = MMC_MODE_4BIT,
|
||||
.voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
|
||||
.version = MMC_CTLR_VERSION_2,
|
||||
};
|
||||
|
||||
int board_mmc_init(bd_t *bis)
|
||||
{
|
||||
mmc_sd1.input_clk = clk_get(DAVINCI_MMC_CLKID);
|
||||
/* Add slot-0 to mmc subsystem */
|
||||
return davinci_mmc_init(bis, &mmc_sd1);
|
||||
}
|
||||
#endif
|
||||
|
|
@ -1,5 +0,0 @@
|
|||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_DAVINCI=y
|
||||
CONFIG_TARGET_ENBW_CMC=y
|
||||
# CONFIG_CMD_IMLS is not set
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
|
|
@ -1,25 +0,0 @@
|
|||
On the enbw_cmc board is a KSZ8864RMN switch which needs
|
||||
configured through spi before working. This is done on
|
||||
startup from u-boot through a config file stored at an
|
||||
address specified in the "hwconfig" environment variable,
|
||||
subcommand "config".
|
||||
|
||||
For example on the enbw_cmc board:
|
||||
|
||||
hwconfig=switch:lan=on,pwl=off,config=0x60160000
|
||||
|
||||
The file has the following structure:
|
||||
|
||||
- a comment starts with a '#' or a ';' and ends with a newline
|
||||
- The switch needs for its config a reg/value pair, so we
|
||||
have two columns in the file:
|
||||
reg : contains the register address
|
||||
value: contains a 8 bit register value
|
||||
This 2 columns are seperated through space or tab.
|
||||
|
||||
example (minimal configuration on the enbw_cmc board):
|
||||
|
||||
;reg value comment
|
||||
;-----------------------------------------
|
||||
0x01 0x00
|
||||
0x01 0x01 ; Start Switch with this configuration
|
||||
|
|
@ -1,440 +0,0 @@
|
|||
/*
|
||||
* (C) Copyright 2011
|
||||
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
||||
*
|
||||
* Based on:
|
||||
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* Based on davinci_dvevm.h. Original Copyrights follow:
|
||||
*
|
||||
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/*
|
||||
* Board
|
||||
*/
|
||||
#define CONFIG_DRIVER_TI_EMAC
|
||||
#define CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT 7
|
||||
#define CONFIG_USE_NAND
|
||||
|
||||
/*
|
||||
* SoC Configuration
|
||||
*/
|
||||
#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
|
||||
#define CONFIG_SOC_DA850 /* TI DA850 SoC */
|
||||
#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
|
||||
#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
|
||||
#define CONFIG_SYS_OSCIN_FREQ 24000000
|
||||
#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
|
||||
#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
|
||||
#define CONFIG_DA850_LOWLEVEL
|
||||
#define CONFIG_ARCH_CPU_INIT
|
||||
#define CONFIG_SYS_DA850_PLL_INIT
|
||||
#define CONFIG_SYS_DA850_DDR_INIT
|
||||
#define CONFIG_DA8XX_GPIO
|
||||
#define CONFIG_HOSTNAME enbw_cmc
|
||||
|
||||
#define MACH_TYPE_ENBW_CMC 3585
|
||||
#define CONFIG_MACH_TYPE MACH_TYPE_ENBW_CMC
|
||||
|
||||
/*
|
||||
* Memory Info
|
||||
*/
|
||||
#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */
|
||||
#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
|
||||
#define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */
|
||||
#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
|
||||
|
||||
/* memtest start addr */
|
||||
#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000)
|
||||
|
||||
/* memtest will be run on 16MB */
|
||||
#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
|
||||
|
||||
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
|
||||
|
||||
/*
|
||||
* Serial Driver info
|
||||
*/
|
||||
#define CONFIG_SYS_NS16550
|
||||
#define CONFIG_SYS_NS16550_SERIAL
|
||||
#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */
|
||||
#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */
|
||||
#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
|
||||
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
|
||||
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
|
||||
|
||||
/*
|
||||
* I2C Configuration
|
||||
*/
|
||||
#define CONFIG_SYS_I2C
|
||||
#define CONFIG_SYS_I2C_DAVINCI
|
||||
#define CONFIG_SYS_DAVINCI_I2C_SPEED 80000
|
||||
#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
|
||||
#define CONFIG_SYS_I2C_EXPANDER_ADDR 0x20
|
||||
#define CONFIG_CMD_I2C
|
||||
|
||||
#define CONFIG_CMD_DTT
|
||||
#define CONFIG_DTT_LM75
|
||||
#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
|
||||
#define CONFIG_SYS_DTT_MAX_TEMP 70
|
||||
#define CONFIG_SYS_DTT_LOW_TEMP -30
|
||||
#define CONFIG_SYS_DTT_HYSTERESIS 3
|
||||
|
||||
/*
|
||||
* SPI Configuration
|
||||
*/
|
||||
#define CONFIG_DAVINCI_SPI
|
||||
#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE
|
||||
#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID)
|
||||
#define CONFIG_CMD_SPI
|
||||
|
||||
/*
|
||||
* Flash & Environment
|
||||
*/
|
||||
#ifdef CONFIG_USE_NAND
|
||||
#define CONFIG_NAND_DAVINCI
|
||||
#define CONFIG_SYS_NAND_USE_FLASH_BBT
|
||||
#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
|
||||
#define CONFIG_SYS_NAND_PAGE_2K
|
||||
#define CONFIG_SYS_NAND_CS 3
|
||||
#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
|
||||
#define CONFIG_SYS_NAND_MASK_CLE 0x10
|
||||
#define CONFIG_SYS_NAND_MASK_ALE 0x8
|
||||
#undef CONFIG_SYS_NAND_HW_ECC
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
|
||||
|
||||
#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=davinci_nand.1"
|
||||
#define MTDPARTS_DEFAULT \
|
||||
"mtdparts=" \
|
||||
"physmap-flash.0:" \
|
||||
"512k(U-Boot)," \
|
||||
"64k(env1)," \
|
||||
"64k(env2)," \
|
||||
"-(rest);" \
|
||||
"davinci_nand.1:" \
|
||||
"128k(dtb)," \
|
||||
"3m(kernel)," \
|
||||
"4m(rootfs)," \
|
||||
"-(userfs)"
|
||||
|
||||
|
||||
#define CONFIG_CMD_MTDPARTS
|
||||
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Network & Ethernet Configuration
|
||||
*/
|
||||
#ifdef CONFIG_DRIVER_TI_EMAC
|
||||
#define CONFIG_MII
|
||||
#define CONFIG_BOOTP_DNS
|
||||
#define CONFIG_BOOTP_DNS2
|
||||
#define CONFIG_BOOTP_SEND_HOSTNAME
|
||||
#define CONFIG_NET_RETRY_COUNT 10
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Flash configuration
|
||||
*/
|
||||
#define CONFIG_SYS_FLASH_CFI
|
||||
#define CONFIG_FLASH_CFI_DRIVER
|
||||
#define CONFIG_FLASH_CFI_MTD
|
||||
#define CONFIG_SYS_FLASH_BASE 0x60000000
|
||||
#define CONFIG_SYS_FLASH_SIZE 0x01000000
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
|
||||
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 128
|
||||
#define CONFIG_FLASH_16BIT /* Flash is 16-bit */
|
||||
|
||||
#define CONFIG_ENV_IS_IN_FLASH
|
||||
#define CONFIG_SYS_MONITOR_LEN 0x80000
|
||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \
|
||||
CONFIG_SYS_MONITOR_LEN)
|
||||
#define CONFIG_ENV_SECT_SIZE (64 << 10)
|
||||
#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
|
||||
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + \
|
||||
CONFIG_ENV_SECT_SIZE)
|
||||
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
|
||||
#undef CONFIG_ENV_IS_IN_NAND
|
||||
#define CONFIG_DEFAULT_SETTINGS_ADDR (CONFIG_ENV_ADDR_REDUND + \
|
||||
CONFIG_ENV_SECT_SIZE)
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"u-boot_addr_r=c0000000\0" \
|
||||
"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \
|
||||
"load=tftp ${u-boot_addr_r} ${u-boot}\0" \
|
||||
"update=protect off " __stringify(CONFIG_SYS_FLASH_BASE) " +${filesize};"\
|
||||
"erase " __stringify(CONFIG_SYS_FLASH_BASE) " +${filesize};" \
|
||||
"cp.b ${u-boot_addr_r} " __stringify(CONFIG_SYS_FLASH_BASE) \
|
||||
" ${filesize};" \
|
||||
"protect on " __stringify(CONFIG_SYS_FLASH_BASE) " +${filesize}\0"\
|
||||
"netdev=eth0\0" \
|
||||
"rootpath=/opt/eldk-arm/arm\0" \
|
||||
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=${serverip}:${rootpath}\0" \
|
||||
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
||||
"addip=setenv bootargs ${bootargs} " \
|
||||
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
||||
":${hostname}:${netdev}:off panic=1\0" \
|
||||
"kernel_addr_r=c0700000\0" \
|
||||
"fdt_addr_r=c0600000\0" \
|
||||
"ramdisk_addr_r=c0b00000\0" \
|
||||
"fdt_file=" __stringify(CONFIG_HOSTNAME) "/" \
|
||||
__stringify(CONFIG_HOSTNAME) ".dtb\0" \
|
||||
"kernel_file=" __stringify(CONFIG_HOSTNAME) "/uImage \0" \
|
||||
"nand_ld_ramdsk=nand read ${ramdisk_addr_r} 320000 400000\0" \
|
||||
"nand_ld_kernel=nand read ${kernel_addr_r} 20000 300000\0" \
|
||||
"nand_ld_fdt=nand read ${fdt_addr_r} 0 2000\0" \
|
||||
"load_kernel=tftp ${kernel_addr_r} ${kernel_file}\0" \
|
||||
"load_fdt=tftp ${fdt_addr_r} ${fdt_file}\0" \
|
||||
"load_nand=run nand_ld_ramdsk nand_ld_kernel nand_ld_fdt\0" \
|
||||
"addcon=setenv bootargs ${bootargs} console=ttyS2," \
|
||||
"${baudrate}n8\0" \
|
||||
"net_nfs=run load_fdt load_kernel; " \
|
||||
"run nfsargs addip addcon addmtd addmisc;" \
|
||||
"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
|
||||
"nand_selfnand=run load_nand ramargs addip addcon addmisc;bootm "\
|
||||
"${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0" \
|
||||
"bootcmd=run net_nfs\0" \
|
||||
"machid=e01\0" \
|
||||
"key_cmd_0=echo key: 0\0" \
|
||||
"key_cmd_1=echo key: 1\0" \
|
||||
"key_cmd_2=echo key: 2\0" \
|
||||
"key_cmd_3=echo key: 3\0" \
|
||||
"key_magic_0=0\0" \
|
||||
"key_magic_1=1\0" \
|
||||
"key_magic_2=2\0" \
|
||||
"key_magic_3=3\0" \
|
||||
"magic_keys=0123\0" \
|
||||
"hwconfig=switch:lan=on,pwl=off,config=0x60100000\0" \
|
||||
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
|
||||
"addmisc=setenv bootargs ${bootargs}\0" \
|
||||
"mtdids=" MTDIDS_DEFAULT "\0" \
|
||||
"mtdparts=" MTDPARTS_DEFAULT "\0" \
|
||||
"logversion=2\0" \
|
||||
"\0"
|
||||
|
||||
/*
|
||||
* U-Boot general configuration
|
||||
*/
|
||||
#define CONFIG_BOOTFILE "uImage" /* Boot file name */
|
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
|
||||
#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
|
||||
#define CONFIG_VERSION_VARIABLE
|
||||
#define CONFIG_AUTO_COMPLETE
|
||||
#define CONFIG_SYS_HUSH_PARSER
|
||||
#define CONFIG_CMDLINE_EDITING
|
||||
#define CONFIG_SYS_LONGHELP
|
||||
#define CONFIG_CRC32_VERIFY
|
||||
#define CONFIG_MX_CYCLIC
|
||||
#define CONFIG_BOOTDELAY 3
|
||||
#define CONFIG_HWCONFIG
|
||||
#define CONFIG_SHOW_BOOT_PROGRESS
|
||||
#define CONFIG_BOARD_LATE_INIT
|
||||
|
||||
/*
|
||||
* U-Boot commands
|
||||
*/
|
||||
#define CONFIG_CMD_ENV
|
||||
#define CONFIG_CMD_ASKENV
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_DIAG
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_SAVES
|
||||
#define CONFIG_CMD_CACHE
|
||||
|
||||
#ifdef CONFIG_CMD_BDI
|
||||
#define CONFIG_CLOCKS
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_DRIVER_TI_EMAC
|
||||
#undef CONFIG_CMD_DHCP
|
||||
#undef CONFIG_CMD_MII
|
||||
#undef CONFIG_CMD_PING
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_USE_NAND
|
||||
#define CONFIG_CMD_NAND
|
||||
|
||||
#define CONFIG_CMD_MTDPARTS
|
||||
#define CONFIG_MTD_DEVICE
|
||||
#define CONFIG_MTD_PARTITIONS
|
||||
#define CONFIG_LZO
|
||||
#define CONFIG_RBTREE
|
||||
#define CONFIG_CMD_UBI
|
||||
#define CONFIG_CMD_UBIFS
|
||||
#endif
|
||||
|
||||
#if !defined(CONFIG_USE_NAND) && \
|
||||
!defined(CONFIG_USE_NOR) && \
|
||||
!defined(CONFIG_USE_SPIFLASH)
|
||||
#define CONFIG_ENV_IS_NOWHERE
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
#define CONFIG_ENV_SIZE (16 << 10)
|
||||
#undef CONFIG_CMD_ENV
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_TEXT_BASE 0x60000000
|
||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
||||
#define CONFIG_SYS_SDRAM_BASE 0xc0000000
|
||||
#define CONFIG_SYS_INIT_SP_ADDR (0x8001ff00)
|
||||
|
||||
#define CONFIG_VERSION_VARIABLE
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
|
||||
#define CONFIG_PREBOOT "echo;" \
|
||||
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
|
||||
"echo"
|
||||
#define CONFIG_MISC_INIT_R
|
||||
|
||||
#define CONFIG_CMC_RESET_PIN 0x04000000
|
||||
#define CONFIG_CMC_RESET_TIMEOUT 3
|
||||
|
||||
#define CONFIG_HW_WATCHDOG
|
||||
#define CONFIG_SYS_WDTTIMERBASE DAVINCI_TIMER1_BASE
|
||||
#define CONFIG_SYS_WDT_PERIOD_LOW 0x0c000000
|
||||
#define CONFIG_SYS_WDT_PERIOD_HIGH 0x0
|
||||
|
||||
#define CONFIG_CMD_DATE
|
||||
#define CONFIG_RTC_DAVINCI
|
||||
|
||||
/* SD/MMC */
|
||||
#define CONFIG_MMC
|
||||
#define CONFIG_GENERIC_MMC
|
||||
#define CONFIG_DAVINCI_MMC
|
||||
#define CONFIG_MMC_MBLOCK
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_CMD_MMC
|
||||
|
||||
/* GPIO */
|
||||
#define CONFIG_ENBW_CMC_BOARD_TYPE 57
|
||||
#define CONFIG_ENBW_CMC_HW_ID_BIT0 39
|
||||
#define CONFIG_ENBW_CMC_HW_ID_BIT1 38
|
||||
#define CONFIG_ENBW_CMC_HW_ID_BIT2 35
|
||||
|
||||
/* FDT support */
|
||||
#define CONFIG_OF_LIBFDT
|
||||
|
||||
/* LowLevel Init */
|
||||
/* PLL */
|
||||
#define CONFIG_SYS_DV_CLKMODE 0
|
||||
#define CONFIG_SYS_DA850_PLL0_POSTDIV 0
|
||||
#define CONFIG_SYS_DA850_PLL0_PLLDIV1 0x8000
|
||||
#define CONFIG_SYS_DA850_PLL0_PLLDIV2 0x8001
|
||||
#define CONFIG_SYS_DA850_PLL0_PLLDIV3 0x8002 /* 150MHz */
|
||||
#define CONFIG_SYS_DA850_PLL0_PLLDIV4 0x8003
|
||||
#define CONFIG_SYS_DA850_PLL0_PLLDIV5 0x8002
|
||||
#define CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV1
|
||||
#define CONFIG_SYS_DA850_PLL0_PLLDIV7 0x8005
|
||||
|
||||
#define CONFIG_SYS_DA850_PLL1_POSTDIV 1
|
||||
#define CONFIG_SYS_DA850_PLL1_PLLDIV1 0x8000
|
||||
#define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001
|
||||
#define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8002
|
||||
|
||||
#define CONFIG_SYS_DA850_PLL0_PLLM 18 /* PLL0 -> 456 MHz */
|
||||
#define CONFIG_SYS_DA850_PLL1_PLLM 24 /* PLL1 -> 300 MHz */
|
||||
|
||||
/* DDR RAM */
|
||||
#define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \
|
||||
DV_DDR_PHY_EXT_STRBEN | \
|
||||
(0x4 << DV_DDR_PHY_RD_LATENCY_SHIFT))
|
||||
|
||||
#define CONFIG_SYS_DA850_DDR2_SDBCR (0 | \
|
||||
(0 << DV_DDR_SDCR_DDR2TERM1_SHIFT) | \
|
||||
(0 << DV_DDR_SDCR_MSDRAMEN_SHIFT) | \
|
||||
(1 << DV_DDR_SDCR_DDR2EN_SHIFT) | \
|
||||
(0x1 << DV_DDR_SDCR_DDREN_SHIFT) | \
|
||||
(0x1 << DV_DDR_SDCR_SDRAMEN_SHIFT) | \
|
||||
(0x1 << DV_DDR_SDCR_TIMUNLOCK_SHIFT) | \
|
||||
(0x1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) | \
|
||||
(0x3 << DV_DDR_SDCR_CL_SHIFT) | \
|
||||
(0x2 << DV_DDR_SDCR_IBANK_SHIFT) | \
|
||||
(0x2 << DV_DDR_SDCR_PAGESIZE_SHIFT))
|
||||
|
||||
#define CONFIG_SYS_DA850_DDR2_SDBCR2 4 /* 13 row address bits */
|
||||
|
||||
/*
|
||||
* freq = 150MHz -> t = 7ns
|
||||
*/
|
||||
#define CONFIG_SYS_DA850_DDR2_SDTIMR (0 | \
|
||||
(0x0d << DV_DDR_SDTMR1_RFC_SHIFT) | \
|
||||
(1 << DV_DDR_SDTMR1_RP_SHIFT) | \
|
||||
(1 << DV_DDR_SDTMR1_RCD_SHIFT) | \
|
||||
(1 << DV_DDR_SDTMR1_WR_SHIFT) | \
|
||||
(5 << DV_DDR_SDTMR1_RAS_SHIFT) | \
|
||||
(7 << DV_DDR_SDTMR1_RC_SHIFT) | \
|
||||
(1 << DV_DDR_SDTMR1_RRD_SHIFT) | \
|
||||
(readl(&dv_ddr2_regs_ctrl->sdtimr) & 0x4) | /* Reserved */ \
|
||||
((2 - 1) << DV_DDR_SDTMR1_WTR_SHIFT))
|
||||
|
||||
/*
|
||||
* freq = 150MHz -> t=7ns
|
||||
*/
|
||||
#define CONFIG_SYS_DA850_DDR2_SDTIMR2 (0 | \
|
||||
(readl(&dv_ddr2_regs_ctrl->sdtimr2) & 0x80000000) | /* Reserved */ \
|
||||
(8 << DV_DDR_SDTMR2_RASMAX_SHIFT) | \
|
||||
(2 << DV_DDR_SDTMR2_XP_SHIFT) | \
|
||||
(0 << DV_DDR_SDTMR2_ODT_SHIFT) | \
|
||||
(15 << DV_DDR_SDTMR2_XSNR_SHIFT) | \
|
||||
(27 << DV_DDR_SDTMR2_XSRD_SHIFT) | \
|
||||
(0 << DV_DDR_SDTMR2_RTP_SHIFT) | \
|
||||
(2 << DV_DDR_SDTMR2_CKE_SHIFT))
|
||||
|
||||
#define CONFIG_SYS_DA850_DDR2_SDRCR 0x00000407
|
||||
#define CONFIG_SYS_DA850_DDR2_PBBPR 0x30
|
||||
#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC (DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \
|
||||
DAVINCI_SYSCFG_SUSPSRC_SPI1 | \
|
||||
DAVINCI_SYSCFG_SUSPSRC_UART2 | \
|
||||
DAVINCI_SYSCFG_SUSPSRC_EMAC |\
|
||||
DAVINCI_SYSCFG_SUSPSRC_I2C)
|
||||
|
||||
#define CONFIG_SYS_DA850_CS2CFG (DAVINCI_ABCR_WSETUP(2) | \
|
||||
DAVINCI_ABCR_WSTROBE(6) | \
|
||||
DAVINCI_ABCR_WHOLD(1) | \
|
||||
DAVINCI_ABCR_RSETUP(2) | \
|
||||
DAVINCI_ABCR_RSTROBE(6) | \
|
||||
DAVINCI_ABCR_RHOLD(1) | \
|
||||
DAVINCI_ABCR_ASIZE_16BIT)
|
||||
|
||||
#define CONFIG_SYS_DA850_CS3CFG (DAVINCI_ABCR_WSETUP(1) | \
|
||||
DAVINCI_ABCR_WSTROBE(2) | \
|
||||
DAVINCI_ABCR_WHOLD(1) | \
|
||||
DAVINCI_ABCR_RSETUP(1) | \
|
||||
DAVINCI_ABCR_RSTROBE(6) | \
|
||||
DAVINCI_ABCR_RHOLD(1) | \
|
||||
DAVINCI_ABCR_ASIZE_8BIT)
|
||||
|
||||
/*
|
||||
* NOR Bootconfiguration word:
|
||||
* Method: Direc boot
|
||||
* EMIFA access mode: 16 Bit
|
||||
*/
|
||||
#define CONFIG_SYS_DV_NOR_BOOT_CFG (0x11)
|
||||
|
||||
#define CONFIG_POST (CONFIG_SYS_POST_MEMORY)
|
||||
#define CONFIG_POST_EXTERNAL_WORD_FUNCS
|
||||
#define CONFIG_SYS_POST_WORD_ADDR DAVINCI_RTC_BASE
|
||||
#define CONFIG_LOGBUFFER
|
||||
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
||||
|
||||
#define CONFIG_BOOTCOUNT_LIMIT
|
||||
#define CONFIG_SYS_BOOTCOUNT_ADDR DAVINCI_RTC_BASE
|
||||
#define CONFIG_SYS_BOOTCOUNT_BE
|
||||
|
||||
#define CONFIG_SYS_NAND_U_BOOT_DST 0xc0080000
|
||||
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x60004000
|
||||
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x70000
|
||||
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
|
||||
#endif /* __CONFIG_H */
|
||||
Loading…
Reference in New Issue