redonkable
/
remarkable-uboot
1
0
Fork 0
Code Releases Activity

arm, at91: small updates for the smartweb board 

- add CONFIG_BOOT_RETRY_TIME to 30
- fex LED colors
- fix button pressed combination
- add
  CONFIG_USB_HOST_ETHER
  CONFIG_USB_ETHER_ASIX
  CONFIG_USB_ETHER_MCS7830

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Matthias Michel <matthias.michel@siemens.com>
utp
Heiko Schocher 2015-09-28 11:36:05 +02:00 committed by Andreas Bießmann
parent ac1eefebf5
commit aca5d0830a
2 changed files with 18 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

25
board/siemens/smartweb/smartweb.c
View File

@ -90,7 +90,8 @@ static void smartweb_macb_hw_init(void)
pin_to_mask(AT91_PIN_PA17) |
pin_to_mask(AT91_PIN_PA25) |
pin_to_mask(AT91_PIN_PA26) |
pin_to_mask(AT91_PIN_PA28),
pin_to_mask(AT91_PIN_PA28) |
pin_to_mask(AT91_PIN_PA29),
&pioa->pudr);
at91_phy_reset();
@ -101,7 +102,8 @@ static void smartweb_macb_hw_init(void)
pin_to_mask(AT91_PIN_PA17) |
pin_to_mask(AT91_PIN_PA25) |
pin_to_mask(AT91_PIN_PA26) |
pin_to_mask(AT91_PIN_PA28),
pin_to_mask(AT91_PIN_PA28) |
pin_to_mask(AT91_PIN_PA29),
&pioa->puer);
/* Initialize EMAC=MACB hardware */
@ -141,13 +143,6 @@ int board_early_init_f(void)
int board_init(void)
{
/* Adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
smartweb_nand_hw_init();
#ifdef CONFIG_MACB
smartweb_macb_hw_init();
#endif
/* power LED red */
at91_set_gpio_output(AT91_PIN_PC6, 0);
at91_set_gpio_output(AT91_PIN_PC7, 1);
@ -163,6 +158,13 @@ int board_init(void)
at91_udc_probe(&board_udc_data);
#endif
/* Adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
smartweb_nand_hw_init();
#ifdef CONFIG_MACB
smartweb_macb_hw_init();
#endif
return 0;
}
@ -197,6 +199,7 @@ void matrix_init(void)
void spl_board_init(void)
{
/* power LED orange */
at91_set_gpio_output(AT91_PIN_PC6, 1);
at91_set_gpio_output(AT91_PIN_PC7, 1);
/* alarm LED orange */
@ -212,8 +215,8 @@ void spl_board_init(void)
/* check if both button are pressed */
if (at91_get_gpio_value(AT91_PIN_PA28) == 0 &&
at91_get_gpio_value(AT91_PIN_PA29) == 0) {
debug("Recovery button pressed\n");
at91_get_gpio_value(AT91_PIN_PA29) == 0) {
smartweb_nand_hw_init();
nand_init();
spl_nand_erase_one(0, 0);
}

4
include/configs/smartweb.h
View File

@ -117,6 +117,9 @@
*
*/
#define CONFIG_MACB
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_MCS7830
#define CONFIG_RMII /* use reduced MII inteface */
#define CONFIG_NET_RETRY_COUNT 20 /* # of DHCP/BOOTP retries */
#define CONFIG_AT91_WANTS_COMMON_PHY
@ -182,6 +185,7 @@
/* General Boot Parameter */
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTCOMMAND "run flashboot"
#define CONFIG_BOOT_RETRY_TIME 30
#define CONFIG_SYS_CBSIZE 512
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_PBSIZE \