redonkable
/
remarkable-uboot
1
0
Fork 0
Code Releases Activity

arm: imx6: Switch DDR3 calibration to wait_for_bit() 

Switch the DDR3 calibration from ad-hoc implementation of wait_for_bit()
to generic implementation of wait_for_bit().

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
utp
Marek Vasut 2016-03-02 14:49:51 +01:00 committed by Stefano Babic
parent 08cb448315
commit b10d93ee9e
1 changed files with 12 additions and 32 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

44
arch/arm/cpu/armv7/mx6/ddr.c
View File

@ -12,40 +12,20 @@
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
#include <asm/types.h>
#include <wait_bit.h>
#if defined(CONFIG_MX6QDL) || defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
static int wait_for_bit(void *reg, const uint32_t mask, bool set)
{
unsigned int timeout = 1000;
u32 val;
while (--timeout) {
val = readl(reg);
if (!set)
val = ~val;
if ((val & mask) == mask)
return 0;
udelay(1);
}
printf("%s: Timeout (reg=%p mask=%08x wait_set=%i)\n",
__func__, reg, mask, set);
hang(); /* DRAM couldn't be calibrated, game over :-( */
}
static void reset_read_data_fifos(void)
{
struct mmdc_p_regs *mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
/* Reset data FIFOs twice. */
setbits_le32(&mmdc0->mpdgctrl0, 1 << 31);
wait_for_bit(&mmdc0->mpdgctrl0, 1 << 31, 0);
wait_for_bit("MMDC", &mmdc0->mpdgctrl0, 1 << 31, 0, 100, 0);
setbits_le32(&mmdc0->mpdgctrl0, 1 << 31);
wait_for_bit(&mmdc0->mpdgctrl0, 1 << 31, 0);
wait_for_bit("MMDC", &mmdc0->mpdgctrl0, 1 << 31, 0, 100, 0);
}
static void precharge_all(const bool cs0_enable, const bool cs1_enable)
@ -60,12 +40,12 @@ static void precharge_all(const bool cs0_enable, const bool cs1_enable)
*/
if (cs0_enable) { /* CS0 */
writel(0x04008050, &mmdc0->mdscr);
wait_for_bit(&mmdc0->mdscr, 1 << 14, 1);
wait_for_bit("MMDC", &mmdc0->mdscr, 1 << 14, 1, 100, 0);
}
if (cs1_enable) { /* CS1 */
writel(0x04008058, &mmdc0->mdscr);
wait_for_bit(&mmdc0->mdscr, 1 << 14, 1);
wait_for_bit("MMDC", &mmdc0->mdscr, 1 << 14, 1, 100, 0);
}
}
@ -164,7 +144,7 @@ int mmdc_do_write_level_calibration(void)
* 7. Upon completion of this process the MMDC de-asserts
* the MPWLGCR[HW_WL_EN]
*/
wait_for_bit(&mmdc0->mpwlgcr, 1 << 0, 0);
wait_for_bit("MMDC", &mmdc0->mpwlgcr, 1 << 0, 0, 100, 0);
/*
* 8. check for any errors: check both PHYs for x64 configuration,
@ -289,7 +269,7 @@ int mmdc_do_dqs_calibration(void)
writel(0x00008028, &mmdc0->mdscr);
/* poll to make sure the con_ack bit was asserted */
wait_for_bit(&mmdc0->mdscr, 1 << 14, 1);
wait_for_bit("MMDC", &mmdc0->mdscr, 1 << 14, 1, 100, 0);
/*
* Check MDMISC register CALIB_PER_CS to see which CS calibration
@ -327,7 +307,7 @@ int mmdc_do_dqs_calibration(void)
* this bit until it clears to indicate completion of the write access.
*/
setbits_le32(&mmdc0->mpswdar0, 1);
wait_for_bit(&mmdc0->mpswdar0, 1 << 0, 0);
wait_for_bit("MMDC", &mmdc0->mpswdar0, 1 << 0, 0, 100, 0);
/* Set the RD_DL_ABS# bits to their default values
* (will be calibrated later in the read delay-line calibration).
@ -372,7 +352,7 @@ int mmdc_do_dqs_calibration(void)
setbits_le32(&mmdc0->mpdgctrl0, 5 << 28);
/* Poll for completion. MPDGCTRL0[HW_DG_EN] should be 0 */
wait_for_bit(&mmdc0->mpdgctrl0, 1 << 28, 0);
wait_for_bit("MMDC", &mmdc0->mpdgctrl0, 1 << 28, 0, 100, 0);
/*
* Check to see if any errors were encountered during calibration
@ -431,7 +411,7 @@ int mmdc_do_dqs_calibration(void)
* setting MPRDDLHWCTL[HW_RD_DL_EN] = 0. Also, ensure that
* no error bits were set.
*/
wait_for_bit(&mmdc0->mprddlhwctl, 1 << 4, 0);
wait_for_bit("MMDC", &mmdc0->mprddlhwctl, 1 << 4, 0, 100, 0);
/* check both PHYs for x64 configuration, if x32, check only PHY0 */
if (readl(&mmdc0->mprddlhwctl) & 0x0000000f)
@ -484,7 +464,7 @@ int mmdc_do_dqs_calibration(void)
* by setting MPWRDLHWCTL[HW_WR_DL_EN] = 0.
* Also, ensure that no error bits were set.
*/
wait_for_bit(&mmdc0->mpwrdlhwctl, 1 << 4, 0);
wait_for_bit("MMDC", &mmdc0->mpwrdlhwctl, 1 << 4, 0, 100, 0);
/* Check both PHYs for x64 configuration, if x32, check only PHY0 */
if (readl(&mmdc0->mpwrdlhwctl) & 0x0000000f)
@ -532,7 +512,7 @@ int mmdc_do_dqs_calibration(void)
writel(0x0, &mmdc0->mdscr); /* CS0 */
/* Poll to make sure the con_ack bit is clear */
wait_for_bit(&mmdc0->mdscr, 1 << 14, 0);
wait_for_bit("MMDC", &mmdc0->mdscr, 1 << 14, 0, 100, 0);
/*
* Print out the registers that were updated as a result