redonkable
/
remarkable-uboot
1
0
Fork 0
Code Releases Activity

Merge branch 'master' of http://git.denx.de/u-boot-sunxi

utp
Tom Rini 2016-03-23 18:35:11 -04:00
parent d085ecd61b e449e840c5
commit b5b84be8a7
179 changed files with 6755 additions and 1179 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
arch/arm/Kconfig
View File

@ -531,6 +531,7 @@ config ARCH_SUNXI
select DM_KEYBOARD
select DM_SERIAL
select DM_USB
select OF_BOARD_SETUP
select OF_CONTROL
select OF_SEPARATE
select SPL_STACK_R if !MACH_SUN9I

50
arch/arm/cpu/armv7/sunxi/board.c
View File

@ -113,11 +113,27 @@ int spl_board_load_image(void)
void s_init(void)
{
#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I_A23
/* Magic (undocmented) value taken from boot0, without this DRAM
* access gets messed up (seems cache related) */
/*
* Undocumented magic taken from boot0, without this DRAM
* access gets messed up (seems cache related).
* The boot0 sources describe this as: "config ema for cache sram"
*/
#if defined CONFIG_MACH_SUN6I
setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0x1800);
#elif defined CONFIG_MACH_SUN8I_A23
uint version;
/* Unlock sram version info reg, read it, relock */
setbits_le32(SUNXI_SRAMC_BASE + 0x24, (1 << 15));
version = readl(SUNXI_SRAMC_BASE + 0x24);
clrbits_le32(SUNXI_SRAMC_BASE + 0x24, (1 << 15));
if ((version & 0xffff0000) == 0x16500000)
setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0x1800);
else /* 0x1661 ? */
setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0xc0);
#endif
#if defined CONFIG_MACH_SUN6I || \
defined CONFIG_MACH_SUN7I || \
defined CONFIG_MACH_SUN8I
@ -136,6 +152,7 @@ void s_init(void)
timer_init();
gpio_init();
i2c_init_board();
eth_init_board();
}
#ifdef CONFIG_SPL_BUILD
@ -243,30 +260,3 @@ void enable_caches(void)
dcache_enable();
}
#endif
#ifdef CONFIG_CMD_NET
/*
* Initializes on-chip ethernet controllers.
* to override, implement board_eth_init()
*/
int cpu_eth_init(bd_t *bis)
{
__maybe_unused int rc;
#ifdef CONFIG_MACPWR
gpio_request(CONFIG_MACPWR, "macpwr");
gpio_direction_output(CONFIG_MACPWR, 1);
mdelay(200);
#endif
#ifdef CONFIG_SUNXI_GMAC
rc = sunxi_gmac_initialize(bis);
if (rc < 0) {
printf("sunxi: failed to initialize gmac\n");
return rc;
}
#endif
return 0;
}
#endif

35
arch/arm/cpu/armv7/sunxi/clock.c
View File

@ -12,6 +12,7 @@
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
#include <asm/arch/prcm.h>
#include <asm/arch/sys_proto.h>
__weak void clock_init_sec(void)
@ -28,3 +29,37 @@ int clock_init(void)
return 0;
}
/* These functions are shared between various SoCs so put them here. */
#if defined CONFIG_SUNXI_GEN_SUN6I && !defined CONFIG_MACH_SUN9I
int clock_twi_onoff(int port, int state)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
if (port == 5) {
if (state)
prcm_apb0_enable(
PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_I2C);
else
prcm_apb0_disable(
PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_I2C);
return 0;
}
/* set the apb clock gate and reset for twi */
if (state) {
setbits_le32(&ccm->apb2_gate,
CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT + port));
setbits_le32(&ccm->apb2_reset_cfg,
1 << (APB2_RESET_TWI_SHIFT + port));
} else {
clrbits_le32(&ccm->apb2_reset_cfg,
1 << (APB2_RESET_TWI_SHIFT + port));
clrbits_le32(&ccm->apb2_gate,
CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT + port));
}
return 0;
}
#endif

26
arch/arm/cpu/armv7/sunxi/clock_sun6i.c
View File

@ -85,32 +85,6 @@ void clock_init_uart(void)
#endif
}
int clock_twi_onoff(int port, int state)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
if (port == 5) {
if (state)
prcm_apb0_enable(
PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_I2C);
else
prcm_apb0_disable(
PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_I2C);
return 0;
}
/* set the apb clock gate for twi */
if (state)
setbits_le32(&ccm->apb2_gate,
CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port));
else
clrbits_le32(&ccm->apb2_gate,
CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port));
return 0;
}
#ifdef CONFIG_SPL_BUILD
void clock_set_pll1(unsigned int clk)
{

4
arch/arm/cpu/armv7/sunxi/clock_sun9i.c
View File

@ -43,10 +43,10 @@ int clock_twi_onoff(int port, int state)
setbits_le32(&ccm->apb1_gate,
CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
setbits_le32(&ccm->apb1_reset_cfg,
1 << (APB1_RESET_UART_SHIFT + port));
1 << (APB1_RESET_TWI_SHIFT + port));
} else {
clrbits_le32(&ccm->apb1_reset_cfg,
1 << (APB1_RESET_UART_SHIFT + port));
1 << (APB1_RESET_TWI_SHIFT + port));
clrbits_le32(&ccm->apb1_gate,
CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
}

2
arch/arm/cpu/armv7/sunxi/dram_sun8i_a83t.c
View File

@ -280,7 +280,7 @@ static int mctl_channel_init(struct dram_para *para)
writel(0x94be6fa3, MCTL_PROTECT);
udelay(100);
clrsetbits_le32(MX_UPD2, 0xfff << 16, 0x50 << 26);
clrsetbits_le32(MX_UPD2, 0xfff << 16, 0x50 << 16);
writel(0x0, MCTL_PROTECT);
udelay(100);

1
arch/arm/cpu/armv7/sunxi/usb_phy.c
View File

@ -76,6 +76,7 @@ static int get_vbus_gpio(int index)
case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_PIN);
case 1: return sunxi_name_to_gpio(CONFIG_USB1_VBUS_PIN);
case 2: return sunxi_name_to_gpio(CONFIG_USB2_VBUS_PIN);
case 3: return sunxi_name_to_gpio(CONFIG_USB3_VBUS_PIN);
}
return -EINVAL;
}

13
arch/arm/dts/Makefile
View File

@ -112,6 +112,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-ba10-tvbox.dtb \
sun4i-a10-chuwi-v7-cw0825.dtb \
sun4i-a10-cubieboard.dtb \
sun4i-a10-dserve-dsrv9703c.dtb \
sun4i-a10-gemei-g9.dtb \
sun4i-a10-hackberry.dtb \
sun4i-a10-hyundai-a7hd.dtb \
@ -128,6 +129,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-mk802ii.dtb \
sun4i-a10-olinuxino-lime.dtb \
sun4i-a10-pcduino.dtb \
sun4i-a10-pcduino2.dtb \
sun4i-a10-pov-protab2-ips9.dtb
dtb-$(CONFIG_MACH_SUN5I) += \
sun5i-a10s-auxtek-t003.dtb \
@ -137,6 +139,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \
sun5i-a10s-r7-tv-dongle.dtb \
sun5i-a10s-wobo-i5.dtb \
sun5i-a13-ampe-a76.dtb \
sun5i-a13-difrnce-dit4350.dtb \
sun5i-a13-empire-electronix-d709.dtb \
sun5i-a13-hsg-h702.dtb \
sun5i-a13-inet-86vs.dtb \
@ -154,9 +157,12 @@ dtb-$(CONFIG_MACH_SUN6I) += \
sun6i-a31-m9.dtb \
sun6i-a31-mele-a1000g-quad.dtb \
sun6i-a31-mixtile-loftq.dtb \
sun6i-a31s-colorfly-e708-q1.dtb \
sun6i-a31s-cs908.dtb \
sun6i-a31s-primo81.dtb \
sun6i-a31s-sinovoip-bpi-m2.dtb
sun6i-a31s-sina31s.dtb \
sun6i-a31s-sinovoip-bpi-m2.dtb \
sun6i-a31s-yones-toptech-bs1078-v2.dtb
dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-ainol-aw1.dtb \
sun7i-a20-bananapi.dtb \
@ -165,6 +171,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-cubietruck.dtb \
sun7i-a20-hummingbird.dtb \
sun7i-a20-i12-tvbox.dtb \
sun7i-a20-icnova-swac.dtb \
sun7i-a20-itead-ibox.dtb \
sun7i-a20-lamobo-r1.dtb \
sun7i-a20-m3.dtb \
sun7i-a20-m5.dtb \
@ -184,6 +192,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
dtb-$(CONFIG_MACH_SUN8I_A23) += \
sun8i-a23-evb.dtb \
sun8i-a23-gt90h-v4.dtb \
sun8i-a23-polaroid-mid2809pxe04.dtb \
sun8i-a23-q8-tablet.dtb
dtb-$(CONFIG_MACH_SUN8I_A33) += \
sun8i-a33-ga10h-v1.1.dtb \
@ -191,8 +200,10 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \
sun8i-a33-sinlinx-sina33.dtb
dtb-$(CONFIG_MACH_SUN8I_A83T) += \
sun8i-a83t-allwinner-h8homlet-v2.dtb \
sun8i-a83t-cubietruck-plus.dtb \
sun8i-a83t-sinovoip-bpi-m3.dtb
dtb-$(CONFIG_MACH_SUN8I_H3) += \
sun8i-h3-orangepi-2.dtb \
sun8i-h3-orangepi-pc.dtb \
sun8i-h3-orangepi-plus.dtb
dtb-$(CONFIG_MACH_SUN9I) += \

145
arch/arm/dts/axp22x.dtsi 100644
View File

@ -0,0 +1,145 @@
/*
* Copyright 2015 Chen-Yu Tsai
*
* Chen-Yu Tsai <wens@csie.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/*
* AXP221/221s/223 Integrated Power Management Chip
* http://www.x-powers.com/product/AXP22X.php
* http://dl.linux-sunxi.org/AXP/AXP221%20Datasheet%20V1.2%2020130326%20.pdf
*/
&axp22x {
interrupt-controller;
#interrupt-cells = <1>;
regulators {
/* Default work frequency for buck regulators */
x-powers,dcdc-freq = <3000>;
reg_dcdc1: dcdc1 {
regulator-name = "dcdc1";
};
reg_dcdc2: dcdc2 {
regulator-name = "dcdc2";
};
reg_dcdc3: dcdc3 {
regulator-name = "dcdc3";
};
reg_dcdc4: dcdc4 {
regulator-name = "dcdc4";
};
reg_dcdc5: dcdc5 {
regulator-name = "dcdc5";
};
reg_dc1sw: dc1sw {
regulator-name = "dc1sw";
};
reg_dc5ldo: dc5ldo {
regulator-name = "dc5ldo";
};
reg_aldo1: aldo1 {
regulator-name = "aldo1";
};
reg_aldo2: aldo2 {
regulator-name = "aldo2";
};
reg_aldo3: aldo3 {
regulator-name = "aldo3";
};
reg_dldo1: dldo1 {
regulator-name = "dldo1";
};
reg_dldo2: dldo2 {
regulator-name = "dldo2";
};
reg_dldo3: dldo3 {
regulator-name = "dldo3";
};
reg_dldo4: dldo4 {
regulator-name = "dldo4";
};
reg_eldo1: eldo1 {
regulator-name = "eldo1";
};
reg_eldo2: eldo2 {
regulator-name = "eldo2";
};
reg_eldo3: eldo3 {
regulator-name = "eldo3";
};
reg_ldo_io0: ldo_io0 {
regulator-name = "ldo_io0";
status = "disabled";
};
reg_ldo_io1: ldo_io1 {
regulator-name = "ldo_io1";
status = "disabled";
};
reg_rtc_ldo: rtc_ldo {
/* RTC_LDO is a fixed, always-on regulator */
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "rtc_ldo";
};
};
};

4
arch/arm/dts/sun4i-a10-a1000.dts
View File

@ -93,6 +93,10 @@
status = "okay";
};
&codec {
status = "okay";
};
&ehci0 {
status = "okay";
};

22
arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts
View File

@ -45,6 +45,7 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Chuwi V7 CW0825";
@ -78,6 +79,27 @@
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
ft5306de4: touchscreen@38 {
compatible = "edt,edt-ft5406";
reg = <0x38>;
interrupt-parent = <&pio>;
interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
touchscreen-size-x = <1024>;
touchscreen-size-y = <768>;
};
};
&lradc {
vref-supply = <&reg_vcc3v0>;
status = "okay";

4
arch/arm/dts/sun4i-a10-cubieboard.dts
View File

@ -83,6 +83,10 @@
status = "okay";
};
&codec {
status = "okay";
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};

281
arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts 100644
View File

@ -0,0 +1,281 @@
/*
* Copyright 2016 Hans de Goede <hdegoede@redhat.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun4i-a10.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/pwm/pwm.h>
/ {
model = "Dserve DSRV9703C";
compatible = "dserve,dsrv9703c", "allwinner,sun4i-a10";
aliases {
serial0 = &uart0;
};
backlight: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&bl_en_pin_dsrv9703c>;
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
};
chosen {
stdout-path = "serial0:115200n8";
};
haptics {
compatible = "regulator-haptic";
haptic-supply = <&reg_motor>;
min-microvolt = <3000000>;
max-microvolt = <3000000>;
};
reg_motor: reg_motor {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&motor_pins>;
regulator-name = "vcc-motor";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
enable-active-high;
gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
};
};
&codec {
pinctrl-names = "default";
pinctrl-0 = <&codec_pa_pin>;
allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
status = "okay";
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
&ehci1 {
status = "okay";
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
reg = <0x34>;
interrupts = <0>;
};
};
#include "axp209.dtsi"
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
/* pull-ups and devices require AXP209 LDO3 */
status = "failed";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
ft5406ee8: touchscreen@38 {
compatible = "edt,edt-ft5406";
reg = <0x38>;
interrupt-parent = <&pio>;
interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&touchscreen_pins>;
reset-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
touchscreen-size-x = <1024>;
touchscreen-size-y = <768>;
};
};
&lradc {
vref-supply = <&reg_ldo2>;
status = "okay";
button@400 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <400000>;
};
button@800 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <800000>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
status = "okay";
};
&otg_sram {
status = "okay";
};
&pio {
bl_en_pin_dsrv9703c: bl_en_pin@0 {
allwinner,pins = "PH7";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
codec_pa_pin: codec_pa_pin@0 {
allwinner,pins = "PH15";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
motor_pins: motor_pins@0 {
allwinner,pins = "PB3";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
touchscreen_pins: touchscreen_pins@0 {
allwinner,pins = "PB13";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
allwinner,pins = "PH5";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
};
};
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pins_a>;
status = "okay";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
regulator-name = "vdd-int-dll";
};
&reg_ldo1 {
regulator-name = "vdd-rtc";
};
&reg_ldo2 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
&reg_usb0_vbus {
status = "okay";
};
&reg_usb2_vbus {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
};

63
arch/arm/dts/sun4i-a10-gemei-g9.dts
View File

@ -47,6 +47,7 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Gemei G9 Tablet";
@ -64,12 +65,22 @@
/*
* TODO:
* 2x cameras via CSI
* bma250 IRQs
* AXP battery management
* NAND
* OTG
* Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48
*/
&codec {
/* PH15 controls power to external amplifier (ft2012q) */
pinctrl-names = "default";
pinctrl-0 = <&codec_pa_pin>;
allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
&ehci0 {
status = "okay";
@ -85,15 +96,13 @@
status = "okay";
axp209: pmic@34 {
compatible = "x-powers,axp209";
reg = <0x34>;
interrupts = <0>;
interrupt-controller;
#interrupt-cells = <1>;
};
};
#include "axp209.dtsi"
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
@ -103,17 +112,13 @@
bma250@18 {
compatible = "bosch,bma250";
reg = <0x18>;
/*
* TODO: interrupt pins:
* int1 - PH00
* int2 - PI10
*/
interrupt-parent = <&pio>;
interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH00 / EINT0 */
};
};
&lradc {
vref-supply = <&reg_vcc3v0>;
vref-supply = <&reg_ldo2>;
status = "okay";
@ -149,6 +154,40 @@
status = "okay";
};
&pio {
codec_pa_pin: codec_pa_pin@0 {
allwinner,pins = "PH15";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
regulator-name = "vdd-int-dll";
};
&reg_ldo1 {
regulator-name = "vdd-rtc";
};
&reg_ldo2 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
&reg_usb1_vbus {
status = "okay";
};

48
arch/arm/dts/sun4i-a10-inet1.dts
View File

@ -47,6 +47,7 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/pwm/pwm.h>
/ {
model = "iNet-1";
@ -56,11 +57,25 @@
serial0 = &uart0;
};
backlight: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&bl_en_pin_inet>;
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&codec {
status = "okay";
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
@ -104,6 +119,19 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
ft5x: touchscreen@38 {
compatible = "edt,edt-ft5406";
reg = <0x38>;
interrupt-parent = <&pio>;
interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&touchscreen_wake_pin>;
wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */
touchscreen-size-x = <600>;
touchscreen-size-y = <1024>;
touchscreen-swapped-x-y;
};
};
&lradc {
@ -151,6 +179,20 @@
};
&pio {
bl_en_pin_inet: bl_en_pin@0 {
allwinner,pins = "PH7";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
touchscreen_wake_pin: touchscreen_wake_pin@0 {
allwinner,pins = "PB13";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
@ -166,6 +208,12 @@
};
};
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pins_a>;
status = "okay";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;

127
arch/arm/dts/sun4i-a10-inet97fv2.dts
View File

@ -47,6 +47,8 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "INet-97F Rev 02";
@ -61,8 +63,8 @@
};
};
&ehci0 {
status = "okay";
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
&ehci1 {
@ -75,12 +77,71 @@
status = "okay";
axp209: pmic@34 {
compatible = "x-powers,axp209";
reg = <0x34>;
interrupts = <0>;
};
};
interrupt-controller;
#interrupt-cells = <1>;
#include "axp209.dtsi"
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
ft5406ee8: touchscreen@38 {
compatible = "edt,edt-ft5406";
reg = <0x38>;
interrupt-parent = <&pio>;
interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
touchscreen-size-x = <800>;
touchscreen-size-y = <480>;
};
};
&lradc {
vref-supply = <&reg_ldo2>;
status = "okay";
button@200 {
label = "Menu";
linux,code = <KEY_MENU>;
channel = <0>;
voltage = <200000>;
};
button@600 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <600000>;
};
button@800 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <800000>;
};
button@1000 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;
voltage = <1000000>;
};
button@1200 {
label = "Esc";
linux,code = <KEY_ESC>;
channel = <0>;
voltage = <1200000>;
};
};
@ -94,15 +155,52 @@
status = "okay";
};
&ohci0 {
&otg_sram {
status = "okay";
};
&ohci1 {
status = "okay";
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
allwinner,pins = "PH5";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
};
};
&reg_usb1_vbus {
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
regulator-name = "vdd-int-dll";
};
&reg_ldo1 {
regulator-name = "vdd-rtc";
};
&reg_ldo2 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
&reg_usb0_vbus {
status = "okay";
};
@ -116,8 +214,17 @@
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
usb1_vbus-supply = <&reg_usb1_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
};

181
arch/arm/dts/sun4i-a10-inet9f-rev03.dts
View File

@ -59,6 +59,159 @@
chosen {
stdout-path = "serial0:115200n8";
};
gpio_keys {
compatible = "gpio-keys-polled";
pinctrl-names = "default";
pinctrl-0 = <&key_pins_inet9f>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
button@0 {
label = "Left Joystick Left";
linux,code = <ABS_X>;
linux,input-type = <EV_ABS>;
linux,input-value = <0xffffffff>; /* -1 */
gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
};
button@1 {
label = "Left Joystick Right";
linux,code = <ABS_X>;
linux,input-type = <EV_ABS>;
linux,input-value = <1>;
gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
};
button@2 {
label = "Left Joystick Up";
linux,code = <ABS_Y>;
linux,input-type = <EV_ABS>;
linux,input-value = <0xffffffff>; /* -1 */
gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
};
button@3 {
label = "Left Joystick Down";
linux,code = <ABS_Y>;
linux,input-type = <EV_ABS>;
linux,input-value = <1>;
gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
};
button@4 {
label = "Right Joystick Left";
linux,code = <ABS_Z>;
linux,input-type = <EV_ABS>;
linux,input-value = <0xffffffff>; /* -1 */
gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
};
button@5 {
label = "Right Joystick Right";
linux,code = <ABS_Z>;
linux,input-type = <EV_ABS>;
linux,input-value = <1>;
gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
};
button@6 {
label = "Right Joystick Up";
linux,code = <ABS_RZ>;
linux,input-type = <EV_ABS>;
linux,input-value = <0xffffffff>; /* -1 */
gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
};
button@7 {
label = "Right Joystick Down";
linux,code = <ABS_RZ>;
linux,input-type = <EV_ABS>;
linux,input-value = <1>;
gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
};
button@8 {
label = "DPad Left";
linux,code = <ABS_HAT0X>;
linux,input-type = <EV_ABS>;
linux,input-value = <0xffffffff>; /* -1 */
gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */
};
button@9 {
label = "DPad Right";
linux,code = <ABS_HAT0X>;
linux,input-type = <EV_ABS>;
linux,input-value = <1>;
gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
};
button@10 {
label = "DPad Up";
linux,code = <ABS_HAT0Y>;
linux,input-type = <EV_ABS>;
linux,input-value = <0xffffffff>; /* -1 */
gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
};
button@11 {
label = "DPad Down";
linux,code = <ABS_HAT0Y>;
linux,input-type = <EV_ABS>;
linux,input-value = <1>;
gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
};
button@12 {
label = "Button X";
linux,code = <BTN_X>;
gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */
};
button@13 {
label = "Button Y";
linux,code = <BTN_Y>;
gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */
};
button@14 {
label = "Button A";
linux,code = <BTN_A>;
gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
};
button@15 {
label = "Button B";
linux,code = <BTN_B>;
gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */
};
button@16 {
label = "Select Button";
linux,code = <BTN_SELECT>;
gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
};
button@17 {
label = "Start Button";
linux,code = <BTN_START>;
gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
};
button@18 {
label = "Top Left Button";
linux,code = <BTN_TL>;
gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
};
button@19 {
label = "Top Right Button";
linux,code = <BTN_TR>;
gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */
};
};
};
&cpu0 {
@ -86,12 +239,29 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
/* Accelerometer */
bma250@18 {
compatible = "bosch,bma250";
reg = <0x18>;
interrupt-parent = <&pio>;
interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
ft5406ee8: touchscreen@38 {
compatible = "edt,edt-ft5406";
reg = <0x38>;
interrupt-parent = <&pio>;
interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
touchscreen-size-x = <800>;
touchscreen-size-y = <480>;
};
};
&lradc {
@ -149,6 +319,17 @@
};
&pio {
key_pins_inet9f: key_pins@0 {
allwinner,pins = "PA0", "PA1", "PA3", "PA4",
"PA5", "PA6", "PA8", "PA9",
"PA11", "PA12", "PA13",
"PA14", "PA15", "PA16", "PA17",
"PH22", "PH23", "PH24", "PH25", "PH26";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";

86
arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts
View File

@ -1,5 +1,6 @@
/*
* Copyright 2015 Josef Gajdusek <atx@atx.name>
* Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@ -42,22 +43,11 @@
/dts-v1/;
#include "sun4i-a10.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
#include "sunxi-itead-core-common.dtsi"
/ {
model = "Iteaduino Plus A10";
compatible = "itead,iteaduino-plus-a10", "allwinner,sun4i-a10";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&ahci {
@ -65,18 +55,6 @@
status = "okay";
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
@ -89,12 +67,7 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
reg = <0x34>;
interrupts = <0>;
};
};
@ -135,68 +108,13 @@
status = "okay";
};
&ohci0 {
status = "okay";
};
&ohci1 {
status = "okay";
};
&reg_ahci_5v {
status = "okay";
};
#include "axp209.dtsi"
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1450000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-int-dll";
};
&reg_ldo1 {
regulator-name = "vdd-rtc";
};
&reg_ldo2 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
&reg_usb1_vbus {
status = "okay";
};
&reg_usb2_vbus {
status = "okay";
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins_a>,
<&spi0_cs0_pins_a>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&usbphy {
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
};

15
arch/arm/dts/sun4i-a10-jesurun-q5.dts
View File

@ -156,6 +156,10 @@
status = "okay";
};
&otg_sram {
status = "okay";
};
&pio {
emac_power_pin_q5: emac_power_pin@0 {
allwinner,pins = "PH19";
@ -172,6 +176,11 @@
};
};
&reg_usb0_vbus {
regulator-boot-on;
status = "okay";
};
&reg_usb1_vbus {
status = "okay";
};
@ -186,7 +195,13 @@
status = "okay";
};
&usb_otg {
dr_mode = "host";
status = "okay";
};
&usbphy {
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";

23
arch/arm/dts/sun4i-a10-marsboard.dts
View File

@ -91,6 +91,10 @@
status = "okay";
};
&codec {
status = "okay";
};
&ehci0 {
status = "okay";
};
@ -154,6 +158,10 @@
status = "okay";
};
&otg_sram {
status = "okay";
};
&pio {
led_pins_marsboard: led_pins@0 {
allwinner,pins = "PB5", "PB6", "PB7", "PB8";
@ -161,6 +169,13 @@
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
&reg_usb1_vbus {
@ -184,7 +199,15 @@
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";

37
arch/arm/dts/sun4i-a10-mk802.dts
View File

@ -44,6 +44,7 @@
#include "sun4i-a10.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "MK802";
@ -58,6 +59,10 @@
};
};
&codec {
status = "okay";
};
&ehci0 {
status = "okay";
};
@ -80,7 +85,25 @@
status = "okay";
};
&otg_sram {
status = "okay";
};
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
allwinner,pins = "PH5";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb2_vbus_pin_mk802: usb2_vbus_pin@0 {
allwinner,pins = "PH12";
allwinner,function = "gpio_out";
@ -89,6 +112,10 @@
};
};
&reg_usb0_vbus {
status = "okay";
};
&reg_usb1_vbus {
status = "okay";
};
@ -105,7 +132,17 @@
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";

12
arch/arm/dts/sun4i-a10-olinuxino-lime.dts
View File

@ -124,6 +124,18 @@
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
eeprom: eeprom@50 {
compatible = "atmel,24c16";
reg = <0x50>;
pagesize = <16>;
};
};
&mdio {
status = "okay";

60
arch/arm/dts/sun4i-a10-pcduino.dts
View File

@ -104,6 +104,10 @@
};
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
&ehci0 {
status = "okay";
};
@ -129,12 +133,8 @@
status = "okay";
axp209: pmic@34 {
compatible = "x-powers,axp209";
reg = <0x34>;
interrupts = <0>;
interrupt-controller;
#interrupt-cells = <1>;
};
};
@ -164,6 +164,10 @@
status = "okay";
};
&otg_sram {
status = "okay";
};
&pio {
led_pins_pcduino: led_pins@0 {
allwinner,pins = "PH15", "PH16";
@ -178,14 +182,40 @@
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
&reg_usb1_vbus {
status = "okay";
#include "axp209.dtsi"
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpu";
};
&reg_usb2_vbus {
status = "okay";
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-int-dll";
};
&reg_ldo1 {
regulator-name = "vdd-rtc";
};
&reg_ldo2 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
&uart0 {
@ -194,8 +224,16 @@
status = "okay";
};
&usbphy {
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */
usb2_vbus-supply = <&reg_vcc5v0>; /* USB2 VBUS is always on */
status = "okay";
};

78
arch/arm/dts/sun4i-a10-pcduino2.dts 100644
View File

@ -0,0 +1,78 @@
/*
* Copyright 2015 Siarhei Siamashka <siarhei.siamashka@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/*
* The LinkSprite pcDuino2 board is almost identical to the older
* LinkSprite pcDuino1 board. The only software visible difference
* is that the pcDuino2 board got a USB VBUS voltage regulator, which
* is controlled by the PD2 pin (pulled-up by default). Also one of
* the USB host ports has been replaced with a USB WIFI chip.
*/
#include "sun4i-a10-pcduino.dts"
/ {
model = "LinkSprite pcDuino2";
compatible = "linksprite,a10-pcduino2", "allwinner,sun4i-a10";
};
&pio {
usb2_vbus_pin_pcduino2: usb2_vbus_pin@0 {
allwinner,pins = "PD2";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&reg_usb2_vbus {
pinctrl-names = "default";
pinctrl-0 = <&usb2_vbus_pin_pcduino2>;
gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&usbphy {
usb1_vbus-supply = <&reg_vcc3v3>; /* USB WIFI is always on */
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
};

69
arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts
View File

@ -47,6 +47,7 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/pwm/pwm.h>
/ {
model = "Point of View Protab2-IPS9";
@ -56,11 +57,28 @@
serial0 = &uart0;
};
backlight: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&bl_en_pin_protab>;
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&codec {
pinctrl-names = "default";
pinctrl-0 = <&codec_pa_pin>;
allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
status = "okay";
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
@ -86,12 +104,36 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
/* Accelerometer */
bma250@18 {
compatible = "bosch,bma250";
reg = <0x18>;
interrupt-parent = <&pio>;
interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
pixcir_ts@5c {
pinctrl-names = "default";
pinctrl-0 = <&touchscreen_pins>;
compatible = "pixcir,pixcir_tangoc";
reg = <0x5c>;
interrupt-parent = <&pio>;
interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
attb-gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
enable-gpios = <&pio 0 5 GPIO_ACTIVE_LOW>;
wake-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
touchscreen-size-x = <1024>;
touchscreen-size-y = <768>;
touchscreen-inverted-x;
touchscreen-inverted-y;
};
};
&lradc {
@ -128,6 +170,27 @@
};
&pio {
bl_en_pin_protab: bl_en_pin@0 {
allwinner,pins = "PH7";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
codec_pa_pin: codec_pa_pin@0 {
allwinner,pins = "PH15";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
touchscreen_pins: touchscreen_pins@0 {
allwinner,pins = "PA5", "PB13";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
@ -143,6 +206,12 @@
};
};
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pins_a>;
status = "okay";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;

153
arch/arm/dts/sun4i-a10.dtsi
View File

@ -45,6 +45,7 @@
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/clock/sun4i-a10-pll2.h>
#include <dt-bindings/dma/sun4i-a10.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
@ -65,7 +66,7 @@
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
<&ahb_gates 44>;
<&ahb_gates 44>, <&dram_gates 26>;
status = "disabled";
};
@ -74,7 +75,8 @@
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
<&ahb_gates 44>, <&ahb_gates 46>;
<&ahb_gates 44>, <&ahb_gates 46>,
<&dram_gates 25>, <&dram_gates 26>;
status = "disabled";
};
@ -83,7 +85,8 @@
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
<&ahb_gates 46>;
<&ahb_gates 46>, <&dram_gates 25>,
<&dram_gates 26>;
status = "disabled";
};
@ -92,7 +95,8 @@
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
<&ahb_gates 44>, <&ahb_gates 46>;
<&ahb_gates 44>, <&ahb_gates 46>,
<&dram_gates 25>, <&dram_gates 26>;
status = "disabled";
};
};
@ -195,6 +199,15 @@
clock-output-names = "pll1";
};
pll2: clk@01c20008 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-pll2-clk";
reg = <0x01c20008 0x8>;
clocks = <&osc24M>;
clock-output-names = "pll2-1x", "pll2-2x",
"pll2-4x", "pll2-8x";
};
pll4: clk@01c20018 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-pll1-clk";
@ -241,6 +254,7 @@
compatible = "allwinner,sun4i-a10-axi-gates-clk";
reg = <0x01c2005c 0x4>;
clocks = <&axi>;
clock-indices = <0>;
clock-output-names = "axi_dram";
};
@ -257,17 +271,36 @@
compatible = "allwinner,sun4i-a10-ahb-gates-clk";
reg = <0x01c20060 0x8>;
clocks = <&ahb>;
clock-indices = <0>, <1>,
<2>, <3>,
<4>, <5>, <6>,
<7>, <8>, <9>,
<10>, <11>, <12>,
<13>, <14>, <16>,
<17>, <18>, <20>,
<21>, <22>, <23>,
<24>, <25>, <26>,
<32>, <33>, <34>,
<35>, <36>, <37>,
<40>, <41>, <43>,
<44>, <45>,
<46>, <47>,
<50>, <52>;
clock-output-names = "ahb_usb0", "ahb_ehci0",
"ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss",
"ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1",
"ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand",
"ahb_sdram", "ahb_ace", "ahb_emac", "ahb_ts",
"ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3",
"ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve",
"ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0",
"ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi",
"ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
"ahb_de_fe1", "ahb_mp", "ahb_mali400";
"ahb_ohci0", "ahb_ehci1",
"ahb_ohci1", "ahb_ss", "ahb_dma",
"ahb_bist", "ahb_mmc0", "ahb_mmc1",
"ahb_mmc2", "ahb_mmc3", "ahb_ms",
"ahb_nand", "ahb_sdram", "ahb_ace",
"ahb_emac", "ahb_ts", "ahb_spi0",
"ahb_spi1", "ahb_spi2", "ahb_spi3",
"ahb_pata", "ahb_sata", "ahb_gps",
"ahb_ve", "ahb_tvd", "ahb_tve0",
"ahb_tve1", "ahb_lcd0", "ahb_lcd1",
"ahb_csi0", "ahb_csi1", "ahb_hdmi",
"ahb_de_be0", "ahb_de_be1",
"ahb_de_fe0", "ahb_de_fe1",
"ahb_mp", "ahb_mali400";
};
apb0: apb0@01c20054 {
@ -283,9 +316,14 @@
compatible = "allwinner,sun4i-a10-apb0-gates-clk";
reg = <0x01c20068 0x4>;
clocks = <&apb0>;
clock-indices = <0>, <1>,
<2>, <3>,
<5>, <6>,
<7>, <10>;
clock-output-names = "apb0_codec", "apb0_spdif",
"apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0",
"apb0_ir1", "apb0_keypad";
"apb0_ac97", "apb0_iis",
"apb0_pio", "apb0_ir0",
"apb0_ir1", "apb0_keypad";
};
apb1: clk@01c20058 {
@ -301,12 +339,22 @@
compatible = "allwinner,sun4i-a10-apb1-gates-clk";
reg = <0x01c2006c 0x4>;
clocks = <&apb1>;
clock-indices = <0>, <1>,
<2>, <4>,
<5>, <6>,
<7>, <16>,
<17>, <18>,
<19>, <20>,
<21>, <22>,
<23>;
clock-output-names = "apb1_i2c0", "apb1_i2c1",
"apb1_i2c2", "apb1_can", "apb1_scr",
"apb1_ps20", "apb1_ps21", "apb1_uart0",
"apb1_uart1", "apb1_uart2", "apb1_uart3",
"apb1_uart4", "apb1_uart5", "apb1_uart6",
"apb1_uart7";
"apb1_i2c2", "apb1_can",
"apb1_scr", "apb1_ps20",
"apb1_ps21", "apb1_uart0",
"apb1_uart1", "apb1_uart2",
"apb1_uart3", "apb1_uart4",
"apb1_uart5", "apb1_uart6",
"apb1_uart7";
};
nand_clk: clk@01c20080 {
@ -446,6 +494,48 @@
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi3";
};
dram_gates: clk@01c20100 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-dram-gates-clk";
reg = <0x01c20100 0x4>;
clocks = <&pll5 0>;
clock-indices = <0>,
<1>, <2>,
<3>,
<4>,
<5>, <6>,
<15>,
<24>, <25>,
<26>, <27>,
<28>, <29>;
clock-output-names = "dram_ve",
"dram_csi0", "dram_csi1",
"dram_ts",
"dram_tvd",
"dram_tve0", "dram_tve1",
"dram_output",
"dram_de_fe1", "dram_de_fe0",
"dram_de_be0", "dram_de_be1",
"dram_de_mp", "dram_ace";
};
ve_clk: clk@01c2013c {
#clock-cells = <0>;
#reset-cells = <0>;
compatible = "allwinner,sun4i-a10-ve-clk";
reg = <0x01c2013c 0x4>;
clocks = <&pll4>;
clock-output-names = "ve";
};
codec_clk: clk@01c20140 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-codec-clk";
reg = <0x01c20140 0x4>;
clocks = <&pll2 SUN4I_A10_PLL2_1X>;
clock-output-names = "codec";
};
};
soc@01c00000 {
@ -656,6 +746,14 @@
status = "disabled";
};
crypto: crypto-engine@01c15000 {
compatible = "allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
interrupts = <86>;
clocks = <&ahb_gates 5>, <&ss_clk>;
clock-names = "ahb", "mod";
};
spi2: spi@01c17000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c17000 0x1000>;
@ -961,6 +1059,19 @@
status = "disabled";
};
codec: codec@01c22c00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun4i-a10-codec";
reg = <0x01c22c00 0x40>;
interrupts = <30>;
clocks = <&apb0_gates 0>, <&codec_clk>;
clock-names = "apb", "codec";
dmas = <&dma SUN4I_DMA_NORMAL 19>,
<&dma SUN4I_DMA_NORMAL 19>;
dma-names = "rx", "tx";
status = "disabled";
};
sid: eeprom@01c23800 {
compatible = "allwinner,sun4i-a10-sid";
reg = <0x01c23800 0x10>;

14
arch/arm/dts/sun5i-a10s-auxtek-t004.dts
View File

@ -86,6 +86,20 @@
status = "okay";
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp152: pmic@30 {
compatible = "x-powers,axp152";
reg = <0x30>;
interrupts = <0>;
interrupt-controller;
#interrupt-cells = <1>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>;

2
arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
View File

@ -111,7 +111,7 @@
status = "okay";
at24@50 {
compatible = "at,24c16";
compatible = "atmel,24c16";
pagesize = <16>;
reg = <0x50>;
read-only;

226
arch/arm/dts/sun5i-a13-difrnce-dit4350.dts 100644
View File

@ -0,0 +1,226 @@
/*
* Copyright 2016 Hans de Goede <hdegoede@redhat.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun5i-a13.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/pwm/pwm.h>
/ {
model = "Difrnce DIT4350";
compatible = "difrnce,dit4350", "allwinner,sun5i-a13";
aliases {
serial0 = &uart1;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
/* TODO: backlight uses axp gpio1 as enable pin */
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
&ehci0 {
status = "okay";
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
reg = <0x34>;
interrupts = <0>;
};
};
#include "axp209.dtsi"
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
pcf8563: rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
&lradc {
vref-supply = <&reg_ldo2>;
status = "okay";
button@200 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <200000>;
};
button@400 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <400000>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
cd-inverted;
status = "okay";
};
&otg_sram {
status = "okay";
};
&pio {
mmc0_cd_pin_d709: mmc0_cd_pin@0 {
allwinner,pins = "PG0";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
allwinner,pins = "PG1";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PG2";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pins>;
status = "okay";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
regulator-name = "vdd-int-pll";
};
&reg_ldo1 {
regulator-name = "vdd-rtc";
};
&reg_ldo2 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
&reg_ldo3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
&reg_usb0_vbus {
gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_b>;
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usb0_vbus_pin_a {
allwinner,pins = "PG12";
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_ldo3>;
status = "okay";
};

19
arch/arm/dts/sun5i-a13-empire-electronix-d709.dts
View File

@ -123,7 +123,7 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet98fv2>;
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
@ -131,27 +131,12 @@
status = "okay";
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <8>;
non-removable;
status = "okay";
mmccard: mmccard@0 {
reg = <0>;
compatible = "mmc-card";
broken-hpi;
};
};
&otg_sram {
status = "okay";
};
&pio {
mmc0_cd_pin_inet98fv2: mmc0_cd_pin@0 {
mmc0_cd_pin_d709: mmc0_cd_pin@0 {
allwinner,pins = "PG0";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;

26
arch/arm/dts/sun5i-a13-inet-98v-rev2.dts
View File

@ -123,21 +123,6 @@
status = "okay";
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <8>;
non-removable;
status = "okay";
mmccard: mmccard@0 {
reg = <0>;
compatible = "mmc-card";
broken-hpi;
};
};
&otg_sram {
status = "okay";
};
@ -201,11 +186,6 @@
status = "okay";
};
&reg_usb1_vbus {
gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_b>;
@ -221,16 +201,12 @@
allwinner,pins = "PG12";
};
&usb1_vbus_pin_a {
allwinner,pins = "PG11";
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb1_vbus-supply = <&reg_ldo3>;
status = "okay";
};

30
arch/arm/dts/sun5i-a13-utoo-p66.dts
View File

@ -47,11 +47,21 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/pwm/pwm.h>
/ {
model = "Utoo P66";
compatible = "utoo,p66", "allwinner,sun5i-a13";
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
/* Note levels of 10 / 20% result in backlight off */
brightness-levels = <0 30 40 50 60 70 80 90 100>;
default-brightness-level = <6>;
/* TODO: backlight uses axp gpio1 as enable pin */
};
i2c_lcd: i2c@0 {
/* The lcd panel i2c interface is hooked up via gpios */
compatible = "i2c-gpio";
@ -63,6 +73,13 @@
};
};
&codec {
pinctrl-names = "default";
pinctrl-0 = <&codec_pa_pin>;
allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */
status = "okay";
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
@ -158,6 +175,13 @@
};
&pio {
codec_pa_pin: codec_pa_pin@0 {
allwinner,pins = "PG3";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_cd_pin_p66: mmc0_cd_pin@0 {
allwinner,pins = "PG0";
allwinner,function = "gpio_in";
@ -201,6 +225,12 @@
};
};
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pins>;
status = "okay";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;

10
arch/arm/dts/sun5i-q8-common.dtsi
View File

@ -41,11 +41,21 @@
*/
#include "sunxi-q8-common.dtsi"
#include <dt-bindings/pwm/pwm.h>
/ {
aliases {
serial0 = &uart1;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
/* TODO: backlight uses axp gpio1 as enable pin */
};
chosen {
stdout-path = "serial0:115200n8";
};

47
arch/arm/dts/sun5i-r8-chip.dts
View File

@ -64,6 +64,26 @@
chosen {
stdout-path = "serial0:115200n8";
};
wifi_reg_on: wifi_reg_on {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&chip_wifi_reg_on_pin>;
regulator-name = "wifi-reg-on";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pio 2 19 GPIO_ACTIVE_HIGH>; /* PC19 */
enable-active-high;
};
};
&codec {
status = "okay";
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
&ehci0 {
@ -109,10 +129,14 @@
};
};
&mmc0_pins_a {
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
vmmc-supply = <&wifi_reg_on>;
bus-width = <4>;
non-removable;
status = "okay";
@ -134,6 +158,13 @@
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
chip_wifi_reg_on_pin: chip_wifi_reg_on_pin@0 {
allwinner,pins = "PC19";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
chip_id_det_pin: chip_id_det_pin@0 {
allwinner,pins = "PG2";
allwinner,function = "gpio_in";
@ -167,6 +198,20 @@
regulator-always-on;
};
&reg_ldo3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vdd-wifi1";
regulator-always-on;
};
&reg_ldo4 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vdd-wifi2";
regulator-always-on;
};
&reg_ldo5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;

31
arch/arm/dts/sun5i.dtsi
View File

@ -44,6 +44,7 @@
#include "skeleton.dtsi"
#include <dt-bindings/clock/sun4i-a10-pll2.h>
#include <dt-bindings/dma/sun4i-a10.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
@ -102,6 +103,15 @@
clock-output-names = "pll1";
};
pll2: clk@01c20008 {
#clock-cells = <1>;
compatible = "allwinner,sun5i-a13-pll2-clk";
reg = <0x01c20008 0x8>;
clocks = <&osc24M>;
clock-output-names = "pll2-1x", "pll2-2x",
"pll2-4x", "pll2-8x";
};
pll4: clk@01c20018 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-pll1-clk";
@ -285,6 +295,14 @@
clock-output-names = "usb_ohci0", "usb_phy";
};
codec_clk: clk@01c20140 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-codec-clk";
reg = <0x01c20140 0x4>;
clocks = <&pll2 SUN4I_A10_PLL2_1X>;
clock-output-names = "codec";
};
mbus_clk: clk@01c2015c {
#clock-cells = <0>;
compatible = "allwinner,sun5i-a13-mbus-clk";
@ -571,6 +589,19 @@
status = "disabled";
};
codec: codec@01c22c00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun4i-a10-codec";
reg = <0x01c22c00 0x40>;
interrupts = <30>;
clocks = <&apb0_gates 0>, <&codec_clk>;
clock-names = "apb", "codec";
dmas = <&dma SUN4I_DMA_NORMAL 19>,
<&dma SUN4I_DMA_NORMAL 19>;
dma-names = "rx", "tx";
status = "disabled";
};
sid: eeprom@01c23800 {
compatible = "allwinner,sun4i-a10-sid";
reg = <0x01c23800 0x10>;

24
arch/arm/dts/sun6i-a31-colombus.dts
View File

@ -60,6 +60,16 @@
chosen {
stdout-path = "serial0:115200n8";
};
i2c_lcd: i2c@0 {
/* The lcd panel i2c interface is hooked up via gpios */
compatible = "i2c-gpio";
pinctrl-names = "default";
pinctrl-0 = <&i2c_lcd_pins>;
gpios = <&pio 0 23 GPIO_ACTIVE_HIGH>, /* PA23, sda */
<&pio 0 24 GPIO_ACTIVE_HIGH>; /* PA24, scl */
i2c-gpio,delay-us = <5>;
};
};
&ehci1 {
@ -94,6 +104,13 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
mma8452: mma8452@1d {
compatible = "fsl,mma8452";
reg = <0x1d>;
interrupt-parent = <&pio>;
interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PA9 */
};
};
&mmc0 {
@ -124,6 +141,13 @@
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c_lcd_pins: i2c_lcd_pin@0 {
allwinner,pins = "PA23", "PA24";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
&reg_usb2_vbus {

132
arch/arm/dts/sun6i-a31-hummingbird.dts
View File

@ -54,6 +54,8 @@
compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
aliases {
rtc0 = &pcf8563;
rtc1 = &rtc;
serial0 = &uart0;
};
@ -67,13 +69,17 @@
};
};
&cpu0 {
cpu-supply = <&reg_dcdc3>;
};
&ehci0 {
status = "okay";
};
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_rgmii_a>;
pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_hummingbird>;
phy = <&phy1>;
phy-mode = "rgmii";
snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>;
@ -119,7 +125,7 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
vmmc-supply = <&vcc_3v0>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
cd-inverted;
@ -134,7 +140,7 @@
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>;
vmmc-supply = <&vcc_wifi>;
vmmc-supply = <&reg_aldo1>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
@ -146,6 +152,13 @@
};
&pio {
gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 {
allwinner,pins = "PA21";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
allwinner,pins = "PA8";
allwinner,function = "gpio_in";
@ -164,70 +177,69 @@
&p2wi {
status = "okay";
axp221: pmic@68 {
axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
dcdc1-supply = <&vcc_3v0>;
dcdc5-supply = <&vcc_dram>;
regulators {
x-powers,dcdc-freq = <3000>;
vcc_3v0: dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-3v0";
};
vdd_cpu: dcdc2 {
regulator-always-on;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-cpu";
};
vdd_gpu: dcdc3 {
regulator-always-on;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-gpu";
};
vdd_sys_dll: dcdc4 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-sys-dll";
};
vcc_dram: dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vcc-dram";
};
vcc_wifi: aldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_wifi";
};
avcc: aldo3 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
};
};
};
#include "axp22x.dtsi"
&reg_aldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3300000>;
regulator-name = "avcc";
};
&reg_dc5ldo {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-cpus";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-3v0";
};
&reg_dcdc2 {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-gpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc4 {
regulator-always-on;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-sys-dll";
};
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vcc-dram";
};
&reg_usb1_vbus {
gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
status = "okay";

65
arch/arm/dts/sun6i-a31.dtsi
View File

@ -61,7 +61,7 @@
#size-cells = <1>;
ranges;
framebuffer@0 {
simplefb_hdmi: framebuffer@0 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
@ -69,7 +69,7 @@
status = "disabled";
};
framebuffer@1 {
simplefb_lcd: framebuffer@1 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
@ -252,6 +252,20 @@
compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
reg = <0x01c20060 0x8>;
clocks = <&ahb1>;
clock-indices = <1>, <5>,
<6>, <8>, <9>,
<10>, <11>, <12>,
<13>, <14>,
<17>, <18>, <19>,
<20>, <21>, <22>,
<23>, <24>, <26>,
<27>, <29>,
<30>, <31>, <32>,
<36>, <37>, <40>,
<43>, <44>, <45>,
<46>, <47>, <50>,
<52>, <55>, <56>,
<57>, <58>;
clock-output-names = "ahb1_mipidsi", "ahb1_ss",
"ahb1_dma", "ahb1_mmc0", "ahb1_mmc1",
"ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1",
@ -281,6 +295,9 @@
compatible = "allwinner,sun6i-a31-apb1-gates-clk";
reg = <0x01c20068 0x4>;
clocks = <&apb1>;
clock-indices = <0>, <4>,
<5>, <12>,
<13>;
clock-output-names = "apb1_codec", "apb1_digital_mic",
"apb1_pio", "apb1_daudio0",
"apb1_daudio1";
@ -299,6 +316,10 @@
compatible = "allwinner,sun6i-a31-apb2-gates-clk";
reg = <0x01c2006c 0x4>;
clocks = <&apb2>;
clock-indices = <0>, <1>,
<2>, <3>, <16>,
<17>, <18>, <19>,
<20>, <21>;
clock-output-names = "apb2_i2c0", "apb2_i2c1",
"apb2_i2c2", "apb2_i2c3",
"apb2_uart0", "apb2_uart1",
@ -346,6 +367,14 @@
"mmc3_sample";
};
ss_clk: clk@01c2009c {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c2009c 0x4>;
clocks = <&osc24M>, <&pll6 0>;
clock-output-names = "ss";
};
spi0_clk: clk@01c200a0 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
@ -384,6 +413,9 @@
compatible = "allwinner,sun6i-a31-usb-clk";
reg = <0x01c200cc 0x4>;
clocks = <&osc24M>;
clock-indices = <8>, <9>, <10>,
<16>, <17>,
<18>;
clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
"usb_ohci0", "usb_ohci1",
"usb_ohci2";
@ -677,6 +709,16 @@
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc3_8bit_emmc_pins: mmc3@1 {
allwinner,pins = "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11", "PC12",
"PC13", "PC14", "PC15",
"PC24";
allwinner,function = "mmc3";
allwinner,drive = <SUN4I_PINCTRL_40_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
gmac_pins_mii_a: gmac_mii@0 {
allwinner,pins = "PA0", "PA1", "PA2", "PA3",
"PA8", "PA9", "PA11",
@ -754,6 +796,13 @@
reg = <0x01c20ca0 0x20>;
};
lradc: lradc@01c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x01c22800 0x100>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
rtp: rtp@01c25000 {
compatible = "allwinner,sun6i-a31-ts";
reg = <0x01c25000 0x100>;
@ -900,6 +949,16 @@
#size-cells = <0>;
};
crypto: crypto-engine@01c15000 {
compatible = "allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 5>, <&ss_clk>;
clock-names = "ahb", "mod";
resets = <&ahb1_rst 5>;
reset-names = "ahb";
};
timer@01c60000 {
compatible = "allwinner,sun6i-a31-hstimer",
"allwinner,sun7i-a20-hstimer";
@ -1061,7 +1120,7 @@
resets = <&apb0_rst 0>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
#interrupt-cells = <3>;
#size-cells = <0>;
#gpio-cells = <3>;

208
arch/arm/dts/sun6i-a31s-colorfly-e708-q1.dts 100644
View File

@ -0,0 +1,208 @@
/*
* Copyright 2016 Hans de Goede <hdegoede@redhat.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun6i-a31s.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Colorfly E708 Q1 tablet";
compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&cpu0 {
cpu-supply = <&reg_dcdc3>;
};
&ehci0 {
/* rtl8188etv wifi is connected here */
status = "okay";
};
&lradc {
vref-supply = <&reg_aldo3>;
status = "okay";
button@1000 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;
voltage = <1000000>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
cd-inverted;
status = "okay";
};
&pio {
mma8452_int_e708_q1: mma8452_int_pin@0 {
allwinner,pins = "PA9";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
allwinner,pins = "PA8";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
&p2wi {
status = "okay";
axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
#include "axp22x.dtsi"
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3300000>;
regulator-name = "avcc";
};
&reg_dc1sw {
regulator-name = "vcc-lcd";
};
&reg_dc5ldo {
regulator-always-on;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-cpus"; /* This is an educated guess */
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-3v0";
};
&reg_dcdc2 {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-gpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc4 {
regulator-always-on;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-sys-dll";
};
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vcc-dram";
};
&reg_dldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
&reg_dldo2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-pg";
};
&simplefb_lcd {
vcc-lcd-supply = <&reg_dc1sw>;
vcc-pg-supply = <&reg_dldo2>;
};
/*
* FIXME for now we only support host mode and rely on u-boot to have
* turned on Vbus which is controlled by the axp221 pmic on the board.
*
* Once we have axp221 power-supply and vbus-usb support we should switch
* to fully supporting otg.
*/
&usb_otg {
dr_mode = "host";
status = "okay";
};
&usbphy {
usb1_vbus-supply = <&reg_dldo1>;
status = "okay";
};

249
arch/arm/dts/sun6i-a31s-primo81.dts
View File

@ -1,16 +1,57 @@
/*
* Copyright 2015 Hans de Goede <hdegoede@redhat.com>
* Copyright 2014 Siarhei Siamashka <siarhei.siamashka@gmail.com>
* Copyright 2015 Karsten Merker <merker@debian.org>
* Copyright 2015 Chen-Yu Tsai <wens@csie.org>
*
* Minimal dts file for the MSI Primo81 for u-boot only
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* SPDX-License-Identifier: GPL-2.0+ or X11
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun6i-a31s.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "MSI Primo81";
model = "MSI Primo81 tablet";
compatible = "msi,primo81", "allwinner,sun6i-a31s";
aliases {
@ -22,8 +63,202 @@
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
&cpu0 {
cpu-supply = <&reg_dcdc3>;
};
&ehci0 {
/* rtl8188etv wifi is connected here */
status = "okay";
};
&i2c0 {
/* pull-ups and device VDDIO use AXP221 DLDO3 */
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "failed";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
ctp@5d {
pinctrl-names = "default";
pinctrl-0 = <&gt911_int_primo81>;
compatible = "goodix,gt911";
reg = <0x5d>;
interrupt-parent = <&pio>;
interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */
touchscreen-swapped-x-y;
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
accelerometer@1c {
pinctrl-names = "default";
pinctrl-0 = <&mma8452_int_primo81>;
compatible = "fsl,mma8452";
reg = <0x1c>;
interrupt-parent = <&pio>;
interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */
#io-channel-cells = <1>;
};
};
&lradc {
vref-supply = <&reg_aldo3>;
status = "okay";
button@158 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <158730>;
};
button@349 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <349206>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
cd-inverted;
status = "okay";
};
&pio {
gt911_int_primo81: gt911_int_pin@0 {
allwinner,pins = "PA3";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mma8452_int_primo81: mma8452_int_pin@0 {
allwinner,pins = "PA9";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
mmc0_cd_pin_primo81: mmc0_cd_pin@0 {
allwinner,pins = "PA8";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
&p2wi {
status = "okay";
axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
#include "axp22x.dtsi"
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3300000>;
regulator-name = "avcc";
};
&reg_dc1sw {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-lcd";
};
&reg_dc5ldo {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-cpus"; /* This is an educated guess */
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-3v0";
};
&reg_dcdc2 {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-gpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc4 {
regulator-always-on;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-sys-dll";
};
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vcc-dram";
};
&reg_dldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
&reg_dldo3 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "vddio-csi";
};
&reg_eldo3 {
regulator-min-microvolt = <1080000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-mipi-bridge";
};
&simplefb_lcd {
vcc-lcd-supply = <&reg_dc1sw>;
vdd-mipi-bridge-supply = <&reg_eldo3>;
};
&usb_otg {
/* otg support requires support for AXP221 usb-power-supply and GPIO */
dr_mode = "host";
status = "okay";
};
&usbphy {
usb1_vbus-supply = <&reg_dldo1>;
status = "okay";
};

142
arch/arm/dts/sun6i-a31s-sina31s-core.dtsi 100644
View File

@ -0,0 +1,142 @@
/*
* Copyright 2015 Chen-Yu Tsai <wens@csie.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun6i-a31s.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Sinlinx SinA31s Core Board";
compatible = "sinlinx,sina31s", "allwinner,sun6i-a31s";
aliases {
serial0 = &uart0;
};
};
&cpu0 {
cpu-supply = <&reg_dcdc3>;
};
/* eMMC on core board */
&mmc3 {
pinctrl-names = "default";
pinctrl-0 = <&mmc3_8bit_emmc_pins>;
vmmc-supply = <&reg_dcdc1>;
vqmmc-supply = <&reg_dcdc1>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
status = "okay";
};
/* AXP221s PMIC on core board */
&p2wi {
status = "okay";
axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
#include "axp22x.dtsi"
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3300000>;
regulator-name = "avcc";
};
&reg_dc5ldo {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-cpus";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-3v0";
};
&reg_dcdc2 {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-gpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc4 {
regulator-always-on;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-sys-dll";
};
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vcc-dram";
};
/* UART0 pads available on core board */
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};

153
arch/arm/dts/sun6i-a31s-sina31s.dts 100644
View File

@ -0,0 +1,153 @@
/*
* Copyright 2015 Chen-Yu Tsai <wens@csie.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/* The SinA31s development board has the SinA31s core board soldered on */
#include "sun6i-a31s-sina31s-core.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Sinlinx SinA31s Development Board";
compatible = "sinlinx,sina31s-sdk", "allwinner,sun6i-a31s";
chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pin_sina31s>;
status {
label = "sina31s:status:usr";
gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
};
};
};
&ehci0 {
/* USB 2.0 4 port hub IC */
status = "okay";
};
&ehci1 {
status = "okay";
};
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_mii_a>;
phy = <&phy1>;
phy-mode = "mii";
phy-supply = <&reg_dldo1>;
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
status = "okay";
};
&lradc {
vref-supply = <&reg_aldo3>;
status = "okay";
button@158 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <158730>;
};
button@349 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <349206>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */
cd-inverted;
status = "okay";
};
&ohci1 {
status = "okay";
};
&pio {
led_pin_sina31s: led_pin@0 {
allwinner,pins = "PH13";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_cd_pin_sina31s: mmc0_cd_pin@0 {
allwinner,pins = "PA4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
&reg_dldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-gmac-phy";
};
&usbphy {
status = "okay";
};

205
arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts 100644
View File

@ -0,0 +1,205 @@
/*
* Copyright 2015 Lawrence Yu <lyu@micile.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun6i-a31s.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Yones TopTech BS1078 v2 Tablet";
compatible = "yones-toptech,bs1078-v2", "allwinner,sun6i-a31s";
aliases {
serial0 = &uart0;
i2c1 = &i2c1;
i2c2 = &i2c2;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&ohci0 {
status = "okay";
};
&ohci1 {
status = "okay";
};
&pio {
mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 {
allwinner,pins = "PA8";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>;
vmmc-supply = <&reg_vcc3v0>;
bus-width = <4>;
cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
cd-inverted;
status = "okay";
};
&mmc0_pins_a {
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
&p2wi {
status = "okay";
axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
#include "axp22x.dtsi"
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3300000>;
regulator-name = "avcc";
};
&reg_dc1sw {
regulator-name = "vcc-lcd-usb2";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
&reg_dc5ldo {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-cpus";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-3v0";
};
&reg_dcdc2 {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-gpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc4 {
regulator-always-on;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-sys-dll";
};
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vcc-dram";
};
&reg_dldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
/* Voltage source for I2C pullup resistors for I2C Bus 0 */
&reg_dldo3 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "vddio-csi";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&usbphy {
usb1_vbus-supply = <&reg_dldo1>;
usb2_vbus-supply = <&reg_dc1sw>;
status = "okay";
};

78
arch/arm/dts/sun7i-a20-bananapi.dts
View File

@ -92,6 +92,24 @@
status = "okay";
};
&codec {
status = "okay";
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
operating-points = <
/* kHz uV */
960000 1400000
912000 1400000
864000 1350000
720000 1250000
528000 1150000
312000 1100000
144000 1050000
>;
};
&ehci0 {
status = "okay";
};
@ -119,13 +137,9 @@
status = "okay";
axp209: pmic@34 {
compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
};
};
@ -159,7 +173,18 @@
status = "okay";
};
&otg_sram {
status = "okay";
};
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
allwinner,pins = "PH10";
allwinner,function = "gpio_in";
@ -182,6 +207,37 @@
};
};
#include "axp209.dtsi"
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-int-dll";
};
&reg_ldo1 {
regulator-name = "vdd-rtc";
};
&reg_ldo2 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
&reg_usb0_vbus {
status = "okay";
};
&reg_usb1_vbus {
status = "okay";
};
@ -216,7 +272,21 @@
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usb_power_supply {
status = "okay";
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";

23
arch/arm/dts/sun7i-a20-cubieboard2.dts
View File

@ -84,6 +84,10 @@
status = "okay";
};
&codec {
status = "okay";
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
@ -150,6 +154,10 @@
status = "okay";
};
&otg_sram {
status = "okay";
};
&pio {
led_pins_cubieboard2: led_pins@0 {
allwinner,pins = "PH20", "PH21";
@ -157,12 +165,24 @@
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
&reg_ahci_5v {
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
#include "axp209.dtsi"
&reg_dcdc2 {
@ -205,6 +225,9 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";

4
arch/arm/dts/sun7i-a20-cubietruck.dts
View File

@ -101,6 +101,10 @@
status = "okay";
};
&codec {
status = "okay";
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};

169
arch/arm/dts/sun7i-a20-icnova-swac.dts 100644
View File

@ -0,0 +1,169 @@
/*
* Copyright 2015 Stefan Roese <sr@denx.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun7i-a20.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "ICnova-A20 SWAC";
compatible = "swac,icnova-a20-swac", "incircuit,icnova-a20", "allwinner,sun7i-a20";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_mii_a>;
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 8 5 GPIO_ACTIVE_HIGH>; /* PI5 */
cd-inverted;
status = "okay";
};
&ohci0 {
status = "okay";
};
&ohci1 {
status = "okay";
};
#include "axp209.dtsi"
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-int-dll";
};
&reg_ldo1 {
regulator-name = "vdd-rtc";
};
&reg_ldo2 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
&reg_usb1_vbus {
status = "okay";
};
&reg_usb2_vbus {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&usbphy {
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
};

125
arch/arm/dts/sun7i-a20-itead-ibox.dts 100644
View File

@ -0,0 +1,125 @@
/*
* Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun7i-a20.dtsi"
#include "sunxi-itead-core-common.dtsi"
/ {
model = "Itead Ibox A20";
compatible = "itead,itead-ibox-a20", "allwinner,sun7i-a20";
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_itead_core>;
green {
label = "itead_core:green:usr";
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
blue {
label = "itead_core:blue:usr";
gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
};
&ahci {
target-supply = <&reg_ahci_5v>;
status = "okay";
};
&codec {
status = "okay";
};
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_mii_a>;
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&i2c0 {
axp209: pmic@34 {
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
status = "okay";
};
&pio {
led_pins_itead_core: led_pins@0 {
allwinner,pins = "PH20","PH21";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_20_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&reg_ahci_5v {
status = "okay";
};

10
arch/arm/dts/sun7i-a20-lamobo-r1.dts
View File

@ -97,16 +97,6 @@
&cpu0 {
cpu-supply = <&reg_dcdc2>;
operating-points = <
/* kHz uV */
960000 1400000
912000 1400000
864000 1350000
720000 1250000
528000 1150000
312000 1100000
144000 1050000
>;
};
&ehci0 {

39
arch/arm/dts/sun7i-a20-mk808c.dts
View File

@ -53,6 +53,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "mk808c";
@ -68,6 +69,10 @@
};
};
&codec {
status = "okay";
};
&ehci0 {
status = "okay";
};
@ -121,6 +126,30 @@
status = "okay";
};
&otg_sram {
status = "okay";
};
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
allwinner,pins = "PH5";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&reg_usb0_vbus {
status = "okay";
};
&reg_usb1_vbus {
status = "okay";
};
@ -141,7 +170,17 @@
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";

95
arch/arm/dts/sun7i-a20-olimex-som-evb.dts
View File

@ -1,5 +1,6 @@
/*
* Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
* Copyright 2015 - Karsten Merker <merker@debian.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@ -45,6 +46,7 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
@ -71,14 +73,6 @@
default-state = "on";
};
};
reg_axp_ipsout: axp_ipsout {
compatible = "regulator-fixed";
regulator-name = "axp-ipsout";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
};
&ahci {
@ -94,6 +88,10 @@
status = "okay";
};
&codec {
status = "okay";
};
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_rgmii_a>;
@ -118,10 +116,58 @@
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
&lradc {
vref-supply = <&reg_vcc3v0>;
status = "okay";
button@190 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <190000>;
};
button@390 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <390000>;
};
button@600 {
label = "Menu";
linux,code = <KEY_MENU>;
channel = <0>;
voltage = <600000>;
};
button@800 {
label = "Search";
linux,code = <KEY_SEARCH>;
channel = <0>;
voltage = <800000>;
};
button@980 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;
voltage = <980000>;
};
button@1180 {
label = "Esc";
linux,code = <KEY_ESC>;
channel = <0>;
voltage = <1180000>;
};
button@1400 {
label = "Enter";
linux,code = <KEY_ENTER>;
channel = <0>;
voltage = <1400000>;
};
};
&mmc0 {
@ -134,6 +180,16 @@
status = "okay";
};
&mmc3 {
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olimex_som_evb>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
cd-inverted;
status = "okay";
};
&ohci0 {
status = "okay";
};
@ -161,15 +217,22 @@
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc3_cd_pin_olimex_som_evb: mmc3_cd_pin@0 {
allwinner,pins = "PH0";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH04";
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
allwinner,pins = "PH05";
allwinner,pins = "PH5";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
@ -187,7 +250,7 @@
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1425000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpu";
};
@ -235,8 +298,8 @@
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpios = <&pio 7 04 GPIO_ACTIVE_HIGH>; /* PH04 */
usb0_vbus_det-gpios = <&pio 7 05 GPIO_ACTIVE_HIGH>; /* PH05 */
usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */
usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH05 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;

12
arch/arm/dts/sun7i-a20-olinuxino-lime.dts
View File

@ -117,6 +117,18 @@
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
eeprom: eeprom@50 {
compatible = "atmel,24c16";
reg = <0x50>;
pagesize = <16>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;

47
arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
View File

@ -170,6 +170,12 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
eeprom: eeprom@50 {
compatible = "atmel,24c16";
reg = <0x50>;
pagesize = <16>;
};
};
&mmc0 {
@ -190,6 +196,10 @@
status = "okay";
};
&otg_sram {
status = "okay";
};
&pio {
ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
allwinner,pins = "PC3";
@ -204,6 +214,27 @@
allwinner,drive = <SUN4I_PINCTRL_20_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
allwinner,pins = "PH5";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
};
usb0_vbus_pin_lime2: usb0_vbus_pin@0 {
allwinner,pins = "PC17";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&reg_ahci_5v {
@ -212,6 +243,12 @@
status = "okay";
};
&reg_usb0_vbus {
pinctrl-0 = <&usb0_vbus_pin_lime2>;
gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&reg_usb1_vbus {
status = "okay";
};
@ -226,7 +263,17 @@
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";

6
arch/arm/dts/sun7i-a20-olinuxino-micro.dts
View File

@ -125,6 +125,12 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
eeprom: eeprom@50 {
compatible = "atmel,24c16";
reg = <0x50>;
pagesize = <16>;
};
};
&i2c2 {

33
arch/arm/dts/sun7i-a20-orangepi-mini.dts
View File

@ -95,6 +95,10 @@
status = "okay";
};
&codec {
status = "okay";
};
&ehci0 {
status = "okay";
};
@ -156,7 +160,18 @@
status = "okay";
};
&otg_sram {
status = "okay";
};
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
allwinner,pins = "PH10";
allwinner,function = "gpio_in";
@ -225,6 +240,10 @@
regulator-name = "avcc";
};
&reg_usb0_vbus {
status = "okay";
};
&reg_usb1_vbus {
pinctrl-0 = <&usb1_vbus_pin_bananapro>;
gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
@ -243,7 +262,21 @@
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usb_power_supply {
status = "okay";
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";

29
arch/arm/dts/sun7i-a20-orangepi.dts
View File

@ -141,7 +141,18 @@
status = "okay";
};
&otg_sram {
status = "okay";
};
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
allwinner,pins = "PH10";
allwinner,function = "gpio_in";
@ -203,6 +214,10 @@
regulator-name = "avcc";
};
&reg_usb0_vbus {
status = "okay";
};
&reg_usb1_vbus {
pinctrl-0 = <&usb1_vbus_pin_bananapro>;
gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
@ -221,7 +236,21 @@
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usb_power_supply {
status = "okay";
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";

73
arch/arm/dts/sun7i-a20-pcduino3-nano.dts
View File

@ -82,6 +82,14 @@
status = "okay";
};
&codec {
status = "okay";
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
&ehci0 {
status = "okay";
};
@ -108,13 +116,9 @@
status = "okay";
axp209: pmic@34 {
compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
};
};
@ -142,6 +146,10 @@
status = "okay";
};
&otg_sram {
status = "okay";
};
&pio {
ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 {
allwinner,pins = "PH2";
@ -157,8 +165,15 @@
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 {
allwinner,pins = "PH11";
allwinner,pins = "PD2";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
@ -171,13 +186,37 @@
status = "okay";
};
&reg_usb1_vbus {
pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>;
gpio = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
status = "okay";
#include "axp209.dtsi"
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpu";
};
&reg_usb2_vbus {
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-int-pll";
};
&reg_ldo1 {
regulator-name = "vdd-rtc";
};
&reg_ldo2 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
/* A single regulator (U24) powers both USB host ports. */
&reg_usb1_vbus {
pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>;
gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
status = "okay";
};
@ -187,8 +226,16 @@
status = "okay";
};
&usbphy {
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};

58
arch/arm/dts/sun7i-a20-pcduino3.dts
View File

@ -111,6 +111,14 @@
allwinner,pins = "PH2";
};
&codec {
status = "okay";
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
&ehci0 {
status = "okay";
};
@ -137,16 +145,14 @@
status = "okay";
axp209: pmic@34 {
compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
};
};
#include "axp209.dtsi"
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
@ -171,6 +177,10 @@
status = "okay";
};
&otg_sram {
status = "okay";
};
&pio {
led_pins_pcduino3: led_pins@0 {
allwinner,pins = "PH15", "PH16";
@ -185,6 +195,13 @@
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
&reg_ahci_5v {
@ -192,6 +209,31 @@
status = "okay";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-int-pll";
};
&reg_ldo1 {
regulator-name = "vdd-rtc";
};
&reg_ldo2 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
&reg_usb1_vbus {
status = "okay";
};
@ -206,7 +248,15 @@
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";

90
arch/arm/dts/sun7i-a20-wexler-tab7200.dts
View File

@ -48,6 +48,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pwm/pwm.h>
/ {
model = "Wexler TAB7200";
@ -57,11 +58,28 @@
serial0 = &uart0;
};
backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
pinctrl-names = "default";
pinctrl-0 = <&bl_enable_pin>;
enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&codec {
pinctrl-names = "default";
pinctrl-0 = <&codec_pa_pin>;
allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
status = "okay";
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
@ -86,6 +104,8 @@
};
};
#include "axp209.dtsi"
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
@ -96,6 +116,18 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
gt911: touchscreen@5d {
compatible = "goodix,gt911";
reg = <0x5d>;
interrupt-parent = <&pio>;
interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
pinctrl-names = "default";
pinctrl-0 = <&ts_reset_pin>;
irq-gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* INT (PH21) */
reset-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* RST (PB13) */
touchscreen-swapped-x-y;
};
};
&lradc {
@ -135,7 +167,45 @@
status = "okay";
};
#include "axp209.dtsi"
&otg_sram {
status = "okay";
};
&pio {
bl_enable_pin: bl_enable_pin@0 {
allwinner,pins = "PH7";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
codec_pa_pin: codec_pa_pin@0 {
allwinner,pins = "PH15";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
ts_reset_pin: ts_reset_pin@0 {
allwinner,pins = "PB13";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pins_a>;
status = "okay";
};
&reg_dcdc2 {
regulator-always-on;
@ -162,6 +232,10 @@
regulator-name = "avcc";
};
&reg_usb0_vbus {
status = "okay";
};
&reg_usb1_vbus {
status = "okay";
};
@ -176,7 +250,21 @@
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usb_power_supply {
status = "okay";
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";

187
arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
View File

@ -1,13 +1,52 @@
/*
* Copyright 2015 Hans de Goede <hdegoede@redhat.com>
* Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
*
* Minimal dts file for the Wits Pro A20 DKT for u-boot only
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* SPDX-License-Identifier: GPL-2.0+ or X11
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun7i-a20.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Wits Pro A20 DKT";
@ -20,6 +59,17 @@
chosen {
stdout-path = "serial0:115200n8";
};
mmc3_pwrseq: mmc3_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&vmmc3_pin_ap6xxx_wl_regon>;
reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
};
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
&ehci0 {
@ -42,6 +92,60 @@
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
#include "axp209.dtsi"
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
status = "okay";
};
&mmc3 {
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
mmc-pwrseq = <&mmc3_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
brcmf: bcrmf@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&pio>;
interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
interrupt-names = "host-wake";
};
};
&ohci0 {
status = "okay";
};
@ -50,8 +154,85 @@
status = "okay";
};
&otg_sram {
status = "okay";
};
&pio {
vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 {
allwinner,pins = "PH9";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PH4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1450000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-int-dll";
};
&reg_ldo1 {
regulator-name = "vdd-rtc";
};
&reg_ldo2 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
&reg_usb0_vbus {
status = "okay";
};
&reg_usb1_vbus {
status = "okay";
};
&reg_usb2_vbus {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usb_power_supply {
status = "okay";
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
};

113
arch/arm/dts/sun7i-a20.dtsi
View File

@ -47,6 +47,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/clock/sun4i-a10-pll2.h>
#include <dt-bindings/dma/sun4i-a10.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
@ -67,7 +68,7 @@
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
<&ahb_gates 44>;
<&ahb_gates 44>, <&dram_gates 26>;
status = "disabled";
};
@ -75,7 +76,8 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
<&dram_gates 26>;
status = "disabled";
};
@ -84,7 +86,7 @@
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-tve0";
clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
<&ahb_gates 44>;
<&ahb_gates 44>, <&dram_gates 26>;
status = "disabled";
};
};
@ -107,7 +109,7 @@
720000 1200000
528000 1100000
312000 1000000
144000 900000
144000 1000000
>;
#cooling-cells = <2>;
cooling-min-level = <0>;
@ -199,6 +201,15 @@
clock-output-names = "pll1";
};
pll2: clk@01c20008 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-pll2-clk";
reg = <0x01c20008 0x8>;
clocks = <&osc24M>;
clock-output-names = "pll2-1x", "pll2-2x",
"pll2-4x", "pll2-8x";
};
pll4: clk@01c20018 {
#clock-cells = <0>;
compatible = "allwinner,sun7i-a20-pll4-clk";
@ -267,6 +278,19 @@
compatible = "allwinner,sun7i-a20-ahb-gates-clk";
reg = <0x01c20060 0x8>;
clocks = <&ahb>;
clock-indices = <0>, <1>,
<2>, <3>, <4>,
<5>, <6>, <7>, <8>,
<9>, <10>, <11>, <12>,
<13>, <14>, <16>,
<17>, <18>, <20>, <21>,
<22>, <23>, <25>,
<28>, <32>, <33>, <34>,
<35>, <36>, <37>, <40>,
<41>, <42>, <43>,
<44>, <45>, <46>,
<47>, <49>, <50>,
<52>;
clock-output-names = "ahb_usb0", "ahb_ehci0",
"ahb_ohci0", "ahb_ehci1", "ahb_ohci1",
"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
@ -295,6 +319,10 @@
compatible = "allwinner,sun7i-a20-apb0-gates-clk";
reg = <0x01c20068 0x4>;
clocks = <&apb0>;
clock-indices = <0>, <1>,
<2>, <3>, <4>,
<5>, <6>, <7>,
<8>, <10>;
clock-output-names = "apb0_codec", "apb0_spdif",
"apb0_ac97", "apb0_iis0", "apb0_iis1",
"apb0_pio", "apb0_ir0", "apb0_ir1",
@ -314,6 +342,12 @@
compatible = "allwinner,sun7i-a20-apb1-gates-clk";
reg = <0x01c2006c 0x4>;
clocks = <&apb1>;
clock-indices = <0>, <1>,
<2>, <3>, <4>,
<5>, <6>, <7>,
<15>, <16>, <17>,
<18>, <19>, <20>,
<21>, <22>, <23>;
clock-output-names = "apb1_i2c0", "apb1_i2c1",
"apb1_i2c2", "apb1_i2c3", "apb1_can",
"apb1_scr", "apb1_ps20", "apb1_ps21",
@ -442,6 +476,14 @@
clock-output-names = "ir1";
};
keypad_clk: clk@01c200c4 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200c4 0x4>;
clocks = <&osc24M>;
clock-output-names = "keypad";
};
usb_clk: clk@01c200cc {
#clock-cells = <1>;
#reset-cells = <1>;
@ -460,6 +502,48 @@
clock-output-names = "spi3";
};
dram_gates: clk@01c20100 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-dram-gates-clk";
reg = <0x01c20100 0x4>;
clocks = <&pll5 0>;
clock-indices = <0>,
<1>, <2>,
<3>,
<4>,
<5>, <6>,
<15>,
<24>, <25>,
<26>, <27>,
<28>, <29>;
clock-output-names = "dram_ve",
"dram_csi0", "dram_csi1",
"dram_ts",
"dram_tvd",
"dram_tve0", "dram_tve1",
"dram_output",
"dram_de_fe1", "dram_de_fe0",
"dram_de_be0", "dram_de_be1",
"dram_de_mp", "dram_ace";
};
ve_clk: clk@01c2013c {
#clock-cells = <0>;
#reset-cells = <0>;
compatible = "allwinner,sun4i-a10-ve-clk";
reg = <0x01c2013c 0x4>;
clocks = <&pll4>;
clock-output-names = "ve";
};
codec_clk: clk@01c20140 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-codec-clk";
reg = <0x01c20140 0x4>;
clocks = <&pll2 SUN4I_A10_PLL2_1X>;
clock-output-names = "codec";
};
mbus_clk: clk@01c2015c {
#clock-cells = <0>;
compatible = "allwinner,sun5i-a13-mbus-clk";
@ -744,6 +828,14 @@
status = "disabled";
};
crypto: crypto-engine@01c15000 {
compatible = "allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 5>, <&ss_clk>;
clock-names = "ahb", "mod";
};
spi2: spi@01c17000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c17000 0x1000>;
@ -1159,6 +1251,19 @@
status = "disabled";
};
codec: codec@01c22c00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun7i-a20-codec";
reg = <0x01c22c00 0x40>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb0_gates 0>, <&codec_clk>;
clock-names = "apb", "codec";
dmas = <&dma SUN4I_DMA_NORMAL 19>,
<&dma SUN4I_DMA_NORMAL 19>;
dma-names = "rx", "tx";
status = "disabled";
};
sid: eeprom@01c23800 {
compatible = "allwinner,sun7i-a20-sid";
reg = <0x01c23800 0x200>;

71
arch/arm/dts/sun8i-a23-a33.dtsi
View File

@ -56,7 +56,7 @@
#size-cells = <1>;
ranges;
framebuffer@0 {
simplefb_lcd: framebuffer@0 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
@ -175,27 +175,13 @@
clock-output-names = "apb1";
};
ahb1_gates: clk@01c20060 {
#clock-cells = <1>;
compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
reg = <0x01c20060 0x8>;
clocks = <&ahb1>;
clock-output-names = "ahb1_mipidsi", "ahb1_dma",
"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
"ahb1_nand", "ahb1_sdram",
"ahb1_hstimer", "ahb1_spi0",
"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
"ahb1_csi", "ahb1_be", "ahb1_fe",
"ahb1_gpu", "ahb1_spinlock",
"ahb1_drc";
};
apb1_gates: clk@01c20068 {
#clock-cells = <1>;
compatible = "allwinner,sun8i-a23-apb1-gates-clk";
reg = <0x01c20068 0x4>;
clocks = <&apb1>;
clock-indices = <0>, <5>,
<12>, <13>;
clock-output-names = "apb1_codec", "apb1_pio",
"apb1_daudio0", "apb1_daudio1";
};
@ -213,6 +199,10 @@
compatible = "allwinner,sun8i-a23-apb2-gates-clk";
reg = <0x01c2006c 0x4>;
clocks = <&apb2>;
clock-indices = <0>, <1>,
<2>, <16>,
<17>, <18>,
<19>, <20>;
clock-output-names = "apb2_i2c0", "apb2_i2c1",
"apb2_i2c2", "apb2_uart0",
"apb2_uart1", "apb2_uart2",
@ -391,12 +381,19 @@
allwinner,pins = "PC5", "PC6", "PC8",
"PC9", "PC10", "PC11",
"PC12", "PC13", "PC14",
"PC15";
"PC15", "PC16";
allwinner,function = "mmc2";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
pwm0_pins: pwm0 {
allwinner,pins = "PH0";
allwinner,function = "pwm0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c0_pins_a: i2c0@0 {
allwinner,pins = "PH2", "PH3";
allwinner,function = "i2c0";
@ -451,6 +448,14 @@
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
};
pwm: pwm@01c21400 {
compatible = "allwinner,sun7i-a20-pwm";
reg = <0x01c21400 0xc>;
clocks = <&osc24M>;
#pwm-cells = <3>;
status = "disabled";
};
lradc: lradc@01c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x01c22800 0x100>;
@ -574,6 +579,14 @@
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
nmi_intc: interrupt-controller@01f00c0c {
compatible = "allwinner,sun6i-a31-sc-nmi";
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x01f00c0c 0x38>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
prcm@01f01400 {
compatible = "allwinner,sun8i-a23-prcm";
reg = <0x01f01400 0x200>;
@ -642,10 +655,18 @@
resets = <&apb0_rst 0>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
#address-cells = <1>;
#size-cells = <0>;
#gpio-cells = <3>;
r_rsb_pins: r_rsb {
allwinner,pins = "PL0", "PL1";
allwinner,function = "s_rsb";
allwinner,drive = <SUN4I_PINCTRL_20_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
r_uart_pins_a: r_uart@0 {
allwinner,pins = "PL2", "PL3";
allwinner,function = "s_uart";
@ -653,5 +674,19 @@
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
r_rsb: rsb@01f03400 {
compatible = "allwinner,sun8i-a23-rsb";
reg = <0x01f03400 0x400>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb0_gates 3>;
clock-frequency = <3000000>;
resets = <&apb0_rst 3>;
pinctrl-names = "default";
pinctrl-0 = <&r_rsb_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
};
};

120
arch/arm/dts/sun8i-a23-gt90h-v4.dts
View File

@ -47,15 +47,26 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/pwm/pwm.h>
/ {
model = "Allwinner GT90H Quad Core Tablet (v4)";
compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a33";
model = "Allwinner GT90H Dual Core Tablet (v4)";
compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a23";
aliases {
serial0 = &r_uart;
};
backlight: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&bl_en_pin_gt90h>;
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
};
chosen {
stdout-path = "serial0:115200n8";
};
@ -106,8 +117,7 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gt90h>;
/* FIXME this really is aldo1, correct once we've pmic support */
vmmc-supply = <&reg_vcc3v0>;
vmmc-supply = <&reg_aldo1>;
bus-width = <4>;
cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
cd-inverted;
@ -115,6 +125,13 @@
};
&pio {
bl_en_pin_gt90h: bl_en_pin@0 {
allwinner,pins = "PH6";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_cd_pin_gt90h: mmc0_cd_pin@0 {
allwinner,pins = "PB4";
allwinner,function = "gpio_in";
@ -123,12 +140,106 @@
};
};
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pins>;
status = "okay";
};
&r_rsb {
status = "okay";
axp22x: pmic@3a3 {
compatible = "x-powers,axp223";
reg = <0x3a3>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
eldoin-supply = <&reg_dcdc1>;
};
};
&r_uart {
pinctrl-names = "default";
pinctrl-0 = <&r_uart_pins_a>;
status = "okay";
};
#include "axp22x.dtsi"
&reg_aldo1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-io";
};
&reg_aldo2 {
regulator-always-on;
regulator-min-microvolt = <2350000>;
regulator-max-microvolt = <2650000>;
regulator-name = "vdd-dll";
};
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pll-avcc";
};
&reg_dc1sw {
regulator-name = "vcc-lcd";
};
&reg_dc5ldo {
regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpus";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-3v0";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-sys";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vcc-dram";
};
&reg_dldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};
&simplefb_lcd {
vcc-lcd-supply = <&reg_dc1sw>;
};
/*
* FIXME for now we only support host mode and rely on u-boot to have
* turned on Vbus which is controlled by the axp223 pmic on the board.
@ -141,5 +252,6 @@
};
&usbphy {
usb1_vbus-supply = <&reg_dldo1>;
status = "okay";
};

243
arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts 100644
View File

@ -0,0 +1,243 @@
/*
* Copyright 2016 Hans de Goede <hdegoede@redhat.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun8i-a23.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/pwm/pwm.h>
/ {
model = "Polaroid MID2809PXE04 tablet";
compatible = "polaroid,mid2809pxe04", "allwinner,sun8i-a23";
aliases {
serial0 = &r_uart;
};
backlight: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&bl_en_pin_mid2809>;
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&ehci0 {
status = "okay";
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&lradc {
vref-supply = <&reg_vcc3v0>;
status = "okay";
button@200 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <200000>;
};
button@400 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <400000>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mid2809>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
cd-inverted;
status = "okay";
};
&pio {
bl_en_pin_mid2809: bl_en_pin@0 {
allwinner,pins = "PH6";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_cd_pin_mid2809: mmc0_cd_pin@0 {
allwinner,pins = "PB4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pins>;
status = "okay";
};
&r_rsb {
status = "okay";
axp22x: pmic@3a3 {
compatible = "x-powers,axp223";
reg = <0x3a3>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
eldoin-supply = <&reg_dcdc1>;
};
};
&r_uart {
pinctrl-names = "default";
pinctrl-0 = <&r_uart_pins_a>;
status = "okay";
};
#include "axp22x.dtsi"
&reg_aldo1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-io";
};
&reg_aldo2 {
regulator-always-on;
regulator-min-microvolt = <2350000>;
regulator-max-microvolt = <2650000>;
regulator-name = "vdd-dll";
};
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pll-avcc";
};
&reg_dc1sw {
regulator-name = "vcc-lcd";
};
&reg_dc5ldo {
regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpus";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-3v0";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-sys";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vcc-dram";
};
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};
&simplefb_lcd {
vcc-lcd-supply = <&reg_dc1sw>;
};
/*
* FIXME for now we only support host mode and rely on u-boot to have
* turned on Vbus which is controlled by the axp223 pmic on the board.
*
* Once we have axp223 support we should switch to fully supporting otg.
*/
&usb_otg {
dr_mode = "host";
status = "okay";
};
&usbphy {
status = "okay";
};

25
arch/arm/dts/sun8i-a23.dtsi
View File

@ -50,6 +50,31 @@
};
clocks {
ahb1_gates: clk@01c20060 {
#clock-cells = <1>;
compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
reg = <0x01c20060 0x8>;
clocks = <&ahb1>;
clock-indices = <1>, <6>,
<8>, <9>, <10>,
<13>, <14>,
<19>, <20>,
<21>, <24>, <26>,
<29>, <32>, <36>,
<40>, <44>, <46>,
<52>, <53>,
<54>, <57>;
clock-output-names = "ahb1_mipidsi", "ahb1_dma",
"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
"ahb1_nand", "ahb1_sdram",
"ahb1_hstimer", "ahb1_spi0",
"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
"ahb1_csi", "ahb1_be", "ahb1_fe",
"ahb1_gpu", "ahb1_msgbox",
"ahb1_spinlock", "ahb1_drc";
};
mbus_clk: clk@01c2015c {
#clock-cells = <0>;
compatible = "allwinner,sun8i-a23-mbus-clk";

83
arch/arm/dts/sun8i-a33-sinlinx-sina33.dts
View File

@ -68,7 +68,7 @@
};
&lradc {
vref-supply = <&reg_vcc3v0>;
vref-supply = <&reg_dcdc1>;
status = "okay";
button@200 {
@ -96,7 +96,7 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>;
vmmc-supply = <&reg_vcc3v0>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
cd-inverted;
@ -106,13 +106,16 @@
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_8bit_pins>;
vmmc-supply = <&reg_vcc3v0>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
status = "okay";
};
&mmc2_8bit_pins {
/* Increase drive strength for DDR modes */
allwinner,drive = <SUN4I_PINCTRL_40_MA>;
/* eMMC is missing pull-ups */
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
@ -130,6 +133,80 @@
};
};
&r_rsb {
status = "okay";
axp22x: pmic@3a3 {
compatible = "x-powers,axp223";
reg = <0x3a3>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
eldoin-supply = <&reg_dcdc1>;
};
};
#include "axp22x.dtsi"
&reg_aldo1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-io";
};
&reg_aldo2 {
regulator-always-on;
regulator-min-microvolt = <2350000>;
regulator-max-microvolt = <2650000>;
regulator-name = "vdd-dll";
};
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pll-avcc";
};
&reg_dc5ldo {
regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpus";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-3v0";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-sys";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vcc-dram";
};
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_b>;

45
arch/arm/dts/sun8i-a33.dtsi
View File

@ -72,6 +72,41 @@
clock-output-names = "pll11";
};
ahb1_gates: clk@01c20060 {
#clock-cells = <1>;
compatible = "allwinner,sun8i-a33-ahb1-gates-clk";
reg = <0x01c20060 0x8>;
clocks = <&ahb1>;
clock-indices = <1>, <5>,
<6>, <8>, <9>,
<10>, <13>, <14>,
<19>, <20>,
<21>, <24>, <26>,
<29>, <32>, <36>,
<40>, <44>, <46>,
<52>, <53>,
<54>, <57>,
<58>;
clock-output-names = "ahb1_mipidsi", "ahb1_ss",
"ahb1_dma","ahb1_mmc0", "ahb1_mmc1",
"ahb1_mmc2", "ahb1_nand", "ahb1_sdram",
"ahb1_hstimer", "ahb1_spi0",
"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
"ahb1_csi", "ahb1_be", "ahb1_fe",
"ahb1_gpu", "ahb1_msgbox",
"ahb1_spinlock", "ahb1_drc",
"ahb1_sat";
};
ss_clk: clk@01c2009c {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c2009c 0x4>;
clocks = <&osc24M>, <&pll6 0>;
clock-output-names = "ss";
};
mbus_clk: clk@01c2015c {
#clock-cells = <0>;
compatible = "allwinner,sun8i-a23-mbus-clk";
@ -82,6 +117,16 @@
};
soc@01c00000 {
crypto: crypto-engine@01c15000 {
compatible = "allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 5>, <&ss_clk>;
clock-names = "ahb", "mod";
resets = <&ahb1_rst 5>;
reset-names = "ahb";
};
usb_otg: usb@01c19000 {
compatible = "allwinner,sun8i-a33-musb";
reg = <0x01c19000 0x0400>;

65
arch/arm/dts/sun8i-a83t-cubietruck-plus.dts 100644
View File

@ -0,0 +1,65 @@
/*
* Copyright 2015 Chen-Yu Tsai
*
* Chen-Yu Tsai <wens@csie.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun8i-a83t.dtsi"
/ {
model = "Cubietech Cubietruck Plus";
compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_b>;
status = "okay";
};

125
arch/arm/dts/sun8i-a83t.dtsi
View File

@ -52,12 +52,6 @@
/ {
interrupt-parent = <&gic>;
chosen {
#address-cells = <1>;
#size-cells = <1>;
ranges;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
@ -85,6 +79,7 @@
device_type = "cpu";
reg = <3>;
};
cpu@100 {
compatible = "arm,cortex-a7";
device_type = "cpu";
@ -96,6 +91,7 @@
device_type = "cpu";
reg = <0x101>;
};
cpu@102 {
compatible = "arm,cortex-a7";
device_type = "cpu";
@ -109,18 +105,12 @@
};
};
memory {
reg = <0x40000000 0x80000000>;
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
clock-frequency = <24000000>;
arm,cpu-registers-not-fw-configured;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
};
clocks {
@ -128,6 +118,7 @@
#size-cells = <1>;
ranges;
/* TODO: PRCM block has a mux for this. */
osc24M: osc24M_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
@ -135,36 +126,39 @@
clock-output-names = "osc24M";
};
osc32k: osc32k_clk {
/*
* This is called "internal OSC" in some places.
* It is an internal RC-based oscillator.
* TODO: Its controls are in the PRCM block.
*/
osc16M: osc16M_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "osc32k";
clock-frequency = <16000000>;
clock-output-names = "osc16M";
};
osc16Md512: osc16Md512_clk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <512>;
clock-mult = <1>;
clocks = <&osc16M>;
clock-output-names = "osc16M-d512";
};
};
soc@01c00000 {
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
gic: interrupt-controller@01c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x1000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
#interrupt-cells = <3>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
pio: pinctrl@01c20800 {
compatible = "allwinner,sun8i-a83t-pinctrl";
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01c20800 0x400>;
clocks = <&osc24M>;
gpio-controller;
@ -172,27 +166,6 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
i2c0_pins_a: i2c0@0 {
allwinner,pins = "PH0", "PH1";
allwinner,function = "i2c0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c1_pins_a: i2c1@0 {
allwinner,pins = "PH2", "PH3";
allwinner,function = "i2c1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c2_pins_a: i2c2@0 {
allwinner,pins = "PH4", "PH5";
allwinner,function = "i2c2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
@ -201,24 +174,6 @@
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc1_pins_a: mmc1@0 {
allwinner,pins = "PG0", "PG1", "PG2",
"PG3", "PG4", "PG5";
allwinner,function = "mmc1";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc2_8bit_pins: mmc2_8bit {
allwinner,pins = "PC5", "PC6", "PC8",
"PC9", "PC10", "PC11",
"PC12", "PC13", "PC14",
"PC15";
allwinner,function = "mmc2";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart0_pins_a: uart0@0 {
allwinner,pins = "PF2", "PF4";
allwinner,function = "uart0";
@ -234,6 +189,21 @@
};
};
timer@01c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0xa0>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
watchdog@01c20ca0 {
compatible = "allwinner,sun6i-a31-wdt";
reg = <0x01c20ca0 0x20>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
@ -243,5 +213,16 @@
clocks = <&osc24M>;
status = "disabled";
};
gic: interrupt-controller@01c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x1000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
#interrupt-cells = <3>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
};
};
};

186
arch/arm/dts/sun8i-h3-orangepi-2.dts 100644
View File

@ -0,0 +1,186 @@
/*
* Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun8i-h3.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Xunlong Orange Pi 2";
compatible = "xunlong,orangepi-2", "allwinner,sun8i-h3";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
status_led {
label = "orangepi:red:status";
gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
};
pwr_led {
label = "orangepi:green:pwr";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
r_gpio_keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&sw_r_opc>;
sw2 {
label = "sw2";
linux,code = <BTN_1>;
gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
};
sw4 {
label = "sw4";
linux,code = <BTN_0>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
};
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&wifi_pwrseq_pin_orangepi>;
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */
};
};
&ehci1 {
status = "okay";
};
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
cd-inverted;
status = "okay";
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
};
&pio {
leds_opc: led_pins@0 {
allwinner,pins = "PA15";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&r_pio {
leds_r_opc: led_pins@0 {
allwinner,pins = "PL10";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
sw_r_opc: key_pins@0 {
allwinner,pins = "PL3", "PL4";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin@0 {
allwinner,pins = "PL7";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&reg_usb1_vbus {
gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&usb1_vbus_pin_a {
allwinner,pins = "PG13";
};
&usbphy {
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};

69
arch/arm/dts/sun8i-h3-orangepi-pc.dts
View File

@ -45,6 +45,7 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
@ -58,6 +59,43 @@
chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&leds_opc>;
status_led {
label = "status:red:user";
gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
};
};
r_leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&leds_r_opc>;
tx {
label = "pwr:green:user";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
r_gpio_keys {
compatible = "gpio-keys";
input-name = "sw4";
pinctrl-names = "default";
pinctrl-0 = <&sw_r_opc>;
sw4@0 {
label = "sw4";
linux,code = <BTN_0>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
};
};
};
&ehci1 {
@ -72,6 +110,12 @@
status = "okay";
};
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
@ -94,6 +138,31 @@
status = "okay";
};
&pio {
leds_opc: led_pins@0 {
allwinner,pins = "PA15";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&r_pio {
leds_r_opc: led_pins@0 {
allwinner,pins = "PL10";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
sw_r_opc: key_pins@0 {
allwinner,pins = "PL03";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;

63
arch/arm/dts/sun8i-h3-orangepi-plus.dts
View File

@ -45,6 +45,7 @@
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
@ -70,6 +71,68 @@
enable-active-high;
gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&leds_opc>;
status_led {
label = "status:red:user";
gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
};
};
r_leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&leds_r_opc>;
tx {
label = "pwr:green:user";
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
r_gpio_keys {
compatible = "gpio-keys";
input-name = "sw4";
pinctrl-names = "default";
pinctrl-0 = <&sw_r_opc>;
sw4@0 {
label = "sw4";
linux,code = <BTN_0>;
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
};
};
};
&pio {
leds_opc: led_pins@0 {
allwinner,pins = "PA15";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&r_pio {
leds_r_opc: led_pins@0 {
allwinner,pins = "PL10";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
sw_r_opc: key_pins@0 {
allwinner,pins = "PL03";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&ehci1 {

189
arch/arm/dts/sun8i-h3.dtsi
View File

@ -83,12 +83,6 @@
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
clock-frequency = <24000000>;
arm,cpu-registers-not-fw-configured;
};
memory {
reg = <0x40000000 0x80000000>;
};
clocks {
@ -131,15 +125,24 @@
compatible = "allwinner,sun6i-a31-pll6-clk";
reg = <0x01c20028 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll6", "pll6x2", "pll6d2";
clock-output-names = "pll6", "pll6x2";
};
pll8: clk@01c20044 {
#clock-cells = <1>;
compatible = "allwinner,sun6i-a31-pll6-clk";
reg = <0x01c20044 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll8", "pll8x2";
pll6d2: pll6d2_clk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <2>;
clock-mult = <1>;
clocks = <&pll6 0>;
clock-output-names = "pll6d2";
};
/* dummy clock until pll6 can be reused */
pll8: pll8_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <1>;
clock-output-names = "pll8";
};
cpu: cpu_clk@01c20050 {
@ -170,7 +173,7 @@
#clock-cells = <0>;
compatible = "allwinner,sun8i-h3-ahb2-clk";
reg = <0x01c2005c 0x4>;
clocks = <&ahb1>, <&pll6 2>;
clocks = <&ahb1>, <&pll6d2>;
clock-output-names = "ahb2";
};
@ -213,34 +216,34 @@
<76>, <77>, <78>,
<96>, <97>, <98>,
<112>, <113>,
<114>, <115>, <116>,
<128>, <135>;
clock-output-names = "ahb1_ce", "ahb1_dma", "ahb1_mmc0",
"ahb1_mmc1", "ahb1_mmc2", "ahb1_nand",
"ahb1_sdram", "ahb2_gmac", "ahb1_ts",
"ahb1_hstimer", "ahb1_spi0",
"ahb1_spi1", "ahb1_otg",
"ahb1_otg_ehci0", "ahb1_ehic1",
"ahb1_ehic2", "ahb1_ehic3",
"ahb1_otg_ohci0", "ahb2_ohic1",
"ahb2_ohic2", "ahb2_ohic3", "ahb1_ve",
"ahb1_lcd0", "ahb1_lcd1", "ahb1_deint",
"ahb1_csi", "ahb1_tve", "ahb1_hdmi",
"ahb1_de", "ahb1_gpu", "ahb1_msgbox",
"ahb1_spinlock", "apb1_codec",
"apb1_spdif", "apb1_pio", "apb1_ths",
"apb1_i2s0", "apb1_i2s1", "apb1_i2s2",
"apb2_i2c0", "apb2_i2c1", "apb2_i2c2",
"apb2_uart0", "apb2_uart1",
"apb2_uart2", "apb2_uart3", "apb2_scr",
"ahb1_ephy", "ahb1_dbg";
<114>, <115>,
<116>, <128>, <135>;
clock-output-names = "bus_ce", "bus_dma", "bus_mmc0",
"bus_mmc1", "bus_mmc2", "bus_nand",
"bus_sdram", "bus_gmac", "bus_ts",
"bus_hstimer", "bus_spi0",
"bus_spi1", "bus_otg",
"bus_otg_ehci0", "bus_ehci1",
"bus_ehci2", "bus_ehci3",
"bus_otg_ohci0", "bus_ohci1",
"bus_ohci2", "bus_ohci3", "bus_ve",
"bus_lcd0", "bus_lcd1", "bus_deint",
"bus_csi", "bus_tve", "bus_hdmi",
"bus_de", "bus_gpu", "bus_msgbox",
"bus_spinlock", "bus_codec",
"bus_spdif", "bus_pio", "bus_ths",
"bus_i2s0", "bus_i2s1", "bus_i2s2",
"bus_i2c0", "bus_i2c1", "bus_i2c2",
"bus_uart0", "bus_uart1",
"bus_uart2", "bus_uart3",
"bus_scr", "bus_ephy", "bus_dbg";
};
mmc0_clk: clk@01c20088 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c20088 0x4>;
clocks = <&osc24M>, <&pll6 0>, <&pll8 0>;
clocks = <&osc24M>, <&pll6 0>, <&pll8>;
clock-output-names = "mmc0",
"mmc0_output",
"mmc0_sample";
@ -250,7 +253,7 @@
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c2008c 0x4>;
clocks = <&osc24M>, <&pll6 0>, <&pll8 0>;
clocks = <&osc24M>, <&pll6 0>, <&pll8>;
clock-output-names = "mmc1",
"mmc1_output",
"mmc1_sample";
@ -260,7 +263,7 @@
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c20090 0x4>;
clocks = <&osc24M>, <&pll6 0>, <&pll8 0>;
clocks = <&osc24M>, <&pll6 0>, <&pll8>;
clock-output-names = "mmc2",
"mmc2_output",
"mmc2_sample";
@ -285,6 +288,33 @@
clocks = <&osc24M>, <&pll6 1>, <&pll5>;
clock-output-names = "mbus";
};
apb0: apb0_clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <1>;
clock-mult = <1>;
clocks = <&osc24M>;
clock-output-names = "apb0";
};
apb0_gates: clk@01f01428 {
compatible = "allwinner,sun8i-h3-apb0-gates-clk",
"allwinner,sun4i-a10-gates-clk";
reg = <0x01f01428 0x4>;
#clock-cells = <1>;
clocks = <&apb0>;
clock-indices = <0>, <1>;
clock-output-names = "apb0_pio", "apb0_ir";
};
ir_clk: ir_clk@01f01454 {
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01f01454 0x4>;
#clock-cells = <0>;
clocks = <&osc32k>, <&osc24M>;
clock-output-names = "ir";
};
};
soc {
@ -298,7 +328,7 @@
reg = <0x01c02000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bus_gates 6>;
resets = <&bus_rst 6>;
resets = <&ahb_rst 6>;
#dma-cells = <1>;
};
@ -313,7 +343,7 @@
"mmc",
"output",
"sample";
resets = <&bus_rst 8>;
resets = <&ahb_rst 8>;
reset-names = "ahb";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@ -332,7 +362,7 @@
"mmc",
"output",
"sample";
resets = <&bus_rst 9>;
resets = <&ahb_rst 9>;
reset-names = "ahb";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@ -351,7 +381,7 @@
"mmc",
"output",
"sample";
resets = <&bus_rst 10>;
resets = <&ahb_rst 10>;
reset-names = "ahb";
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@ -396,7 +426,7 @@
reg = <0x01c1b000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bus_gates 25>, <&bus_gates 29>;
resets = <&bus_rst 25>, <&bus_rst 29>;
resets = <&ahb_rst 25>, <&ahb_rst 29>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@ -408,7 +438,7 @@
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bus_gates 29>, <&bus_gates 25>,
<&usb_clk 17>;
resets = <&bus_rst 29>, <&bus_rst 25>;
resets = <&ahb_rst 29>, <&ahb_rst 25>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@ -419,7 +449,7 @@
reg = <0x01c1c000 0x100>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bus_gates 26>, <&bus_gates 30>;
resets = <&bus_rst 26>, <&bus_rst 30>;
resets = <&ahb_rst 26>, <&ahb_rst 30>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
@ -431,7 +461,7 @@
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bus_gates 30>, <&bus_gates 26>,
<&usb_clk 18>;
resets = <&bus_rst 30>, <&bus_rst 26>;
resets = <&ahb_rst 30>, <&ahb_rst 26>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
@ -442,7 +472,7 @@
reg = <0x01c1d000 0x100>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bus_gates 27>, <&bus_gates 31>;
resets = <&bus_rst 27>, <&bus_rst 31>;
resets = <&ahb_rst 27>, <&ahb_rst 31>;
phys = <&usbphy 3>;
phy-names = "usb";
status = "disabled";
@ -454,7 +484,7 @@
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bus_gates 31>, <&bus_gates 27>,
<&usb_clk 19>;
resets = <&bus_rst 31>, <&bus_rst 27>;
resets = <&ahb_rst 31>, <&ahb_rst 27>;
phys = <&usbphy 3>;
phy-names = "usb";
status = "disabled";
@ -469,7 +499,7 @@
gpio-controller;
#gpio-cells = <3>;
interrupt-controller;
#interrupt-cells = <2>;
#interrupt-cells = <3>;
uart0_pins_a: uart0@0 {
allwinner,pins = "PA4", "PA5";
@ -502,10 +532,22 @@
};
};
bus_rst: reset@01c202c0 {
ahb_rst: reset@01c202c0 {
#reset-cells = <1>;
compatible = "allwinner,sun8i-h3-bus-reset";
reg = <0x01c202c0 0x1c>;
compatible = "allwinner,sun6i-a31-ahb1-reset";
reg = <0x01c202c0 0xc>;
};
apb1_rst: reset@01c202d0 {
#reset-cells = <1>;
compatible = "allwinner,sun6i-a31-clock-reset";
reg = <0x01c202d0 0x4>;
};
apb2_rst: reset@01c202d8 {
#reset-cells = <1>;
compatible = "allwinner,sun6i-a31-clock-reset";
reg = <0x01c202d8 0x4>;
};
timer@01c20c00 {
@ -529,7 +571,7 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&bus_gates 112>;
resets = <&bus_rst 144>;
resets = <&apb2_rst 16>;
dmas = <&dma 6>, <&dma 6>;
dma-names = "rx", "tx";
status = "disabled";
@ -542,7 +584,7 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&bus_gates 113>;
resets = <&bus_rst 145>;
resets = <&apb2_rst 17>;
dmas = <&dma 7>, <&dma 7>;
dma-names = "rx", "tx";
status = "disabled";
@ -555,7 +597,7 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&bus_gates 114>;
resets = <&bus_rst 146>;
resets = <&apb2_rst 18>;
dmas = <&dma 8>, <&dma 8>;
dma-names = "rx", "tx";
status = "disabled";
@ -568,7 +610,7 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&bus_gates 115>;
resets = <&bus_rst 147>;
resets = <&apb2_rst 19>;
dmas = <&dma 9>, <&dma 9>;
dma-names = "rx", "tx";
status = "disabled";
@ -591,5 +633,40 @@
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
apb0_reset: reset@01f014b0 {
reg = <0x01f014b0 0x4>;
compatible = "allwinner,sun6i-a31-clock-reset";
#reset-cells = <1>;
};
ir: ir@01f02000 {
compatible = "allwinner,sun5i-a13-ir";
clocks = <&apb0_gates 1>, <&ir_clk>;
clock-names = "apb", "ir";
resets = <&apb0_reset 1>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01f02000 0x40>;
status = "disabled";
};
r_pio: pinctrl@01f02c00 {
compatible = "allwinner,sun8i-h3-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb0_gates 0>;
resets = <&apb0_reset 0>;
gpio-controller;
#gpio-cells = <3>;
interrupt-controller;
#interrupt-cells = <3>;
ir_pins_a: ir@0 {
allwinner,pins = "PL11";
allwinner,function = "s_cir_rx";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
};
};

96
arch/arm/dts/sun8i-q8-common.dtsi
View File

@ -41,11 +41,23 @@
*/
#include "sunxi-q8-common.dtsi"
#include <dt-bindings/pwm/pwm.h>
/ {
aliases {
serial0 = &r_uart;
};
backlight: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&bl_en_pin_q8>;
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
};
chosen {
stdout-path = "serial0:115200n8";
};
@ -54,7 +66,7 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>;
vmmc-supply = <&reg_vcc3v0>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
cd-inverted;
@ -77,8 +89,90 @@
};
};
&r_rsb {
status = "okay";
axp22x: pmic@3a3 {
compatible = "x-powers,axp223";
reg = <0x3a3>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
eldoin-supply = <&reg_dcdc1>;
};
};
#include "axp22x.dtsi"
&reg_aldo1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-io";
};
&reg_aldo2 {
regulator-always-on;
regulator-min-microvolt = <2350000>;
regulator-max-microvolt = <2650000>;
regulator-name = "vdd-dll";
};
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pll-avcc";
};
&reg_dc1sw {
regulator-name = "vcc-lcd";
};
&reg_dc5ldo {
regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpus";
};
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-3v0";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-sys";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc5 {
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "vcc-dram";
};
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};
&r_uart {
pinctrl-names = "default";
pinctrl-0 = <&r_uart_pins_a>;
status = "okay";
};
&simplefb_lcd {
vcc-lcd-supply = <&reg_dc1sw>;
};

36
arch/arm/dts/sun9i-a80-cubieboard4.dts
View File

@ -62,9 +62,31 @@
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_cubieboard4>;
green {
label = "cubieboard4:green:usr";
gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>; /* PH17 */
};
red {
label = "cubieboard4:red:usr";
gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
};
};
};
&pio {
led_pins_cubieboard4: led-pins@0 {
allwinner,pins = "PH6", "PH17";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
allwinner,pins = "PH18";
allwinner,function = "gpio_in";
@ -89,6 +111,20 @@
vmmc-supply = <&reg_vcc3v0>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
status = "okay";
};
&mmc2_8bit_pins {
/* Increase drive strength for DDR modes */
allwinner,drive = <SUN4I_PINCTRL_40_MA>;
};
&r_ir {
status = "okay";
};
&r_rsb {
status = "okay";
};

52
arch/arm/dts/sun9i-a80-optimus.dts
View File

@ -65,7 +65,7 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_optimus>;
pinctrl-0 = <&led_pins_optimus>, <&led_r_pins_optimus>;
/* The LED names match those found on the board */
@ -74,7 +74,10 @@
gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
};
/* led3 is on PM15, in R_PIO */
led3 {
label = "optimus:led3:usr";
gpios = <&r_pio 1 15 GPIO_ACTIVE_HIGH>; /* PM15 */
};
led4 {
label = "optimus:led4:usr";
@ -106,17 +109,6 @@
status = "okay";
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins_a>;
status = "okay";
};
&i2c3_pins_a {
/* Enable internal pull-up */
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
&ohci0 {
status = "okay";
};
@ -171,32 +163,44 @@
vmmc-supply = <&reg_vcc3v0>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
status = "okay";
};
&mmc2_8bit_pins {
/* Increase drive strength for DDR modes */
allwinner,drive = <SUN4I_PINCTRL_40_MA>;
};
&reg_usb1_vbus {
pinctrl-0 = <&usb1_vbus_pin_optimus>;
gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
status = "okay";
};
&r_ir {
status = "okay";
};
&r_pio {
led_r_pins_optimus: led-pins@1 {
allwinner,pins = "PM15";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&r_rsb {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins_a>;
status = "okay";
};
&uart4_pins_a {
/* Enable internal pull-up */
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
&usbphy1 {
phy-supply = <&reg_usb1_vbus>;
status = "okay";

204
arch/arm/dts/sun9i-a80.dtsi
View File

@ -128,6 +128,17 @@
*/
ranges = <0 0 0 0x20000000>;
/*
* This clock is actually configurable from the PRCM address
* space. The external 24M oscillator can be turned off, and
* the clock switched to an internal 16M RC oscillator. Under
* normal operation there's no reason to do this, and the
* default is to use the external good one, so just model this
* as a fixed clock. Also it is not entirely clear if the
* osc24M mux in the PRCM affects the entire clock tree, which
* would also throw all the PLL clock rates off, or just the
* downstream clocks in the PRCM.
*/
osc24M: osc24M_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
@ -135,6 +146,13 @@
clock-output-names = "osc24M";
};
/*
* The 32k clock is from an external source, normally the
* AC100 codec/RTC chip. This clock is by default enabled
* and clocked at 32768 Hz, from the oscillator connected
* to the AC100. It is configurable, but no such driver or
* bindings exist yet.
*/
osc32k: osc32k_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
@ -164,6 +182,14 @@
"usb_phy2", "usb_hsic_12M";
};
pll3: clk@06000008 {
/* placeholder until implemented */
#clock-cells = <0>;
compatible = "fixed-clock";
clock-rate = <0>;
clock-output-names = "pll3";
};
pll4: clk@0600000c {
#clock-cells = <0>;
compatible = "allwinner,sun9i-a80-pll4-clk";
@ -277,9 +303,12 @@
compatible = "allwinner,sun9i-a80-ahb0-gates-clk";
reg = <0x06000580 0x4>;
clocks = <&ahb0>;
clock-indices = <0>, <1>, <3>, <5>, <8>, <12>, <13>,
<14>, <15>, <16>, <18>, <20>, <21>,
<22>, <23>;
clock-indices = <0>, <1>, <3>,
<5>, <8>, <12>,
<13>, <14>,
<15>, <16>, <18>,
<20>, <21>, <22>,
<23>;
clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu",
"ahb0_ss", "ahb0_sd", "ahb0_nand1",
"ahb0_nand0", "ahb0_sdram",
@ -293,7 +322,10 @@
compatible = "allwinner,sun9i-a80-ahb1-gates-clk";
reg = <0x06000584 0x4>;
clocks = <&ahb1>;
clock-indices = <0>, <1>, <17>, <21>, <22>, <23>, <24>;
clock-indices = <0>, <1>,
<17>, <21>,
<22>, <23>,
<24>;
clock-output-names = "ahb1_usbotg", "ahb1_usbhci",
"ahb1_gmac", "ahb1_msgbox",
"ahb1_spinlock", "ahb1_hstimer",
@ -305,8 +337,9 @@
compatible = "allwinner,sun9i-a80-ahb2-gates-clk";
reg = <0x06000588 0x4>;
clocks = <&ahb2>;
clock-indices = <0>, <1>, <2>, <4>, <5>, <7>, <8>,
<11>;
clock-indices = <0>, <1>,
<2>, <4>, <5>,
<7>, <8>, <11>;
clock-output-names = "ahb2_lcd0", "ahb2_lcd1",
"ahb2_edp", "ahb2_csi", "ahb2_hdmi",
"ahb2_de", "ahb2_mp", "ahb2_mipi_dsi";
@ -317,8 +350,10 @@
compatible = "allwinner,sun9i-a80-apb0-gates-clk";
reg = <0x06000590 0x4>;
clocks = <&apb0>;
clock-indices = <1>, <5>, <11>, <12>, <13>, <15>,
<17>, <18>, <19>;
clock-indices = <1>, <5>,
<11>, <12>, <13>,
<15>, <17>, <18>,
<19>;
clock-output-names = "apb0_spdif", "apb0_pio",
"apb0_ac97", "apb0_i2s0", "apb0_i2s1",
"apb0_lradc", "apb0_gpadc", "apb0_twd",
@ -330,14 +365,79 @@
compatible = "allwinner,sun9i-a80-apb1-gates-clk";
reg = <0x06000594 0x4>;
clocks = <&apb1>;
clock-indices = <0>, <1>, <2>, <3>, <4>,
<16>, <17>, <18>, <19>, <20>, <21>;
clock-indices = <0>, <1>,
<2>, <3>, <4>,
<16>, <17>,
<18>, <19>,
<20>, <21>;
clock-output-names = "apb1_i2c0", "apb1_i2c1",
"apb1_i2c2", "apb1_i2c3", "apb1_i2c4",
"apb1_uart0", "apb1_uart1",
"apb1_uart2", "apb1_uart3",
"apb1_uart4", "apb1_uart5";
};
cpus_clk: clk@08001410 {
compatible = "allwinner,sun9i-a80-cpus-clk";
reg = <0x08001410 0x4>;
#clock-cells = <0>;
clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>;
clock-output-names = "cpus";
};
ahbs: ahbs_clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <1>;
clock-mult = <1>;
clocks = <&cpus_clk>;
clock-output-names = "ahbs";
};
apbs: clk@0800141c {
compatible = "allwinner,sun8i-a23-apb0-clk";
reg = <0x0800141c 0x4>;
#clock-cells = <0>;
clocks = <&ahbs>;
clock-output-names = "apbs";
};
apbs_gates: clk@08001428 {
compatible = "allwinner,sun9i-a80-apbs-gates-clk";
reg = <0x08001428 0x4>;
#clock-cells = <1>;
clocks = <&apbs>;
clock-indices = <0>, <1>,
<2>, <3>,
<4>, <5>,
<6>, <7>,
<12>, <13>,
<16>, <17>,
<18>, <20>;
clock-output-names = "apbs_pio", "apbs_ir",
"apbs_timer", "apbs_rsb",
"apbs_uart", "apbs_1wire",
"apbs_i2c0", "apbs_i2c1",
"apbs_ps2_0", "apbs_ps2_1",
"apbs_dma", "apbs_i2s0",
"apbs_i2s1", "apbs_twd";
};
r_1wire_clk: clk@08001450 {
reg = <0x08001450 0x4>;
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
clocks = <&osc32k>, <&osc24M>;
clock-output-names = "r_1wire";
};
r_ir_clk: clk@08001454 {
reg = <0x08001454 0x4>;
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
clocks = <&osc32k>, <&osc24M>;
clock-output-names = "r_ir";
};
};
soc {
@ -443,7 +543,7 @@
};
mmc0: mmc@01c0f000 {
compatible = "allwinner,sun5i-a13-mmc";
compatible = "allwinner,sun9i-a80-mmc";
reg = <0x01c0f000 0x1000>;
clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>,
<&mmc0_clk 1>, <&mmc0_clk 2>;
@ -457,7 +557,7 @@
};
mmc1: mmc@01c10000 {
compatible = "allwinner,sun5i-a13-mmc";
compatible = "allwinner,sun9i-a80-mmc";
reg = <0x01c10000 0x1000>;
clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>,
<&mmc1_clk 1>, <&mmc1_clk 2>;
@ -471,7 +571,7 @@
};
mmc2: mmc@01c11000 {
compatible = "allwinner,sun5i-a13-mmc";
compatible = "allwinner,sun9i-a80-mmc";
reg = <0x01c11000 0x1000>;
clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>,
<&mmc2_clk 1>, <&mmc2_clk 2>;
@ -485,7 +585,7 @@
};
mmc3: mmc@01c12000 {
compatible = "allwinner,sun5i-a13-mmc";
compatible = "allwinner,sun9i-a80-mmc";
reg = <0x01c12000 0x1000>;
clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>,
<&mmc3_clk 1>, <&mmc3_clk 2>;
@ -582,7 +682,7 @@
clocks = <&apb0_gates 5>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
#interrupt-cells = <3>;
#size-cells = <0>;
#gpio-cells = <3>;
@ -604,7 +704,8 @@
mmc2_8bit_pins: mmc2_8bit {
allwinner,pins = "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11", "PC12",
"PC13", "PC14", "PC15";
"PC13", "PC14", "PC15",
"PC16";
allwinner,function = "mmc2";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
@ -752,14 +853,83 @@
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
};
apbs_rst: reset@080014b0 {
reg = <0x080014b0 0x4>;
compatible = "allwinner,sun6i-a31-clock-reset";
#reset-cells = <1>;
};
nmi_intc: interrupt-controller@080015a0 {
compatible = "allwinner,sun9i-a80-nmi";
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x080015a0 0xc>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
r_ir: ir@08002000 {
compatible = "allwinner,sun5i-a13-ir";
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&r_ir_pins>;
clocks = <&apbs_gates 1>, <&r_ir_clk>;
clock-names = "apb", "ir";
resets = <&apbs_rst 1>;
reg = <0x08002000 0x40>;
status = "disabled";
};
r_uart: serial@08002800 {
compatible = "snps,dw-apb-uart";
reg = <0x08002800 0x400>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&osc24M>;
clocks = <&apbs_gates 4>;
resets = <&apbs_rst 4>;
status = "disabled";
};
r_pio: pinctrl@08002c00 {
compatible = "allwinner,sun9i-a80-r-pinctrl";
reg = <0x08002c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apbs_gates 0>;
resets = <&apbs_rst 0>;
gpio-controller;
interrupt-controller;
#address-cells = <1>;
#size-cells = <0>;
#gpio-cells = <3>;
r_ir_pins: r_ir {
allwinner,pins = "PL6";
allwinner,function = "s_cir_rx";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
r_rsb_pins: r_rsb {
allwinner,pins = "PN0", "PN1";
allwinner,function = "s_rsb";
allwinner,drive = <SUN4I_PINCTRL_20_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
r_rsb: i2c@08003400 {
compatible = "allwinner,sun8i-a23-rsb";
reg = <0x08003400 0x400>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apbs_gates 3>;
clock-frequency = <3000000>;
resets = <&apbs_rst 3>;
pinctrl-names = "default";
pinctrl-0 = <&r_rsb_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
};
};

136
arch/arm/dts/sunxi-itead-core-common.dtsi 100644
View File

@ -0,0 +1,136 @@
/*
* Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "sunxi-common-regulators.dtsi"
/ {
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
reg = <0x34>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&ohci0 {
status = "okay";
};
&ohci1 {
status = "okay";
};
#include "axp209.dtsi"
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-int-dll";
};
&reg_ldo1 {
regulator-name = "vdd-rtc";
};
&reg_ldo2 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
&reg_usb1_vbus {
status = "okay";
};
&reg_usb2_vbus {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&usbphy {
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
};

6
arch/arm/dts/sunxi-q8-common.dtsi
View File

@ -75,3 +75,9 @@
voltage = <400000>;
};
};
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pins>;
status = "okay";
};

7
arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
View File

@ -82,7 +82,14 @@
#define SUNXI_AD_DA_BASE 0x01c22c00
#define SUNXI_KEYPAD_BASE 0x01c23000
#define SUNXI_TZPC_BASE 0x01c23400
#if defined(CONFIG_MACH_SUN8I_A83T) || defined(CONFIG_MACH_SUN8I_H3)
/* SID address space starts at 0x01c1400, but e-fuse is at offset 0x200 */
#define SUNXI_SID_BASE 0x01c14200
#else
#define SUNXI_SID_BASE 0x01c23800
#endif
#define SUNXI_SJTAG_BASE 0x01c23c00
#define SUNXI_TP_BASE 0x01c25000

6
arch/arm/include/asm/arch-sunxi/sys_proto.h
View File

@ -24,6 +24,10 @@ void sdelay(unsigned long);
void return_to_fel(uint32_t lr, uint32_t sp);
/* Board / SoC level designware gmac init */
int sunxi_gmac_initialize(bd_t *bis);
#if !defined CONFIG_SPL_BUILD && defined CONFIG_SUNXI_GMAC
void eth_init_board(void);
#else
static inline void eth_init_board(void) {}
#endif
#endif

6
board/sunxi/Kconfig
View File

@ -342,6 +342,12 @@ config USB2_VBUS_PIN
---help---
See USB1_VBUS_PIN help text.
config USB3_VBUS_PIN
string "Vbus enable pin for usb3 (ehci2)"
default ""
---help---
See USB1_VBUS_PIN help text.
config I2C0_ENABLE
bool "Enable I2C/TWI controller 0"
default y if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I

31
board/sunxi/MAINTAINERS
View File

@ -7,6 +7,7 @@ F: configs/A10-OLinuXino-Lime_defconfig
F: configs/ba10_tv_box_defconfig
F: configs/Chuwi_V7_CW0825_defconfig
F: configs/Cubieboard_defconfig
F: configs/dserve_dsrv9703c_defconfig
F: configs/Hyundai_A7HD_defconfig
F: configs/inet1_defconfig
F: configs/inet97fv2_defconfig
@ -25,6 +26,7 @@ F: configs/A13-OLinuXinoM_defconfig
F: configs/Auxtek-T003_defconfig
F: configs/Auxtek-T004_defconfig
F: configs/CHIP_defconfig
F: configs/difrnce_dit4350_defconfig
F: configs/Empire_electronix_d709_defconfig
F: configs/inet98v_rev2_defconfig
F: configs/mk802_a10s_defconfig
@ -33,6 +35,7 @@ F: configs/r7-tv-dongle_defconfig
F: configs/UTOO_P66_defconfig
F: configs/Wobo_i5_defconfig
F: include/configs/sun6i.h
F: configs/colorfly_e708_q1_defconfig
F: configs/CSQ_CS908_defconfig
F: configs/Mele_A1000G_quad_defconfig
F: configs/Mele_M9_defconfig
@ -51,8 +54,10 @@ F: configs/Wits_Pro_A20_DKT_defconfig
F: include/configs/sun8i.h
F: configs/ga10h_v1_1_defconfig
F: configs/gt90h_v4_defconfig
F: configs/orangepi_2_defconfig
F: configs/orangepi_pc_defconfig
F: configs/orangepi_plus_defconfig
F: configs/polaroid_mid2809pxe04_defconfig
F: configs/q8_a23_tablet_800x480_defconfig
F: configs/q8_a33_tablet_800x480_defconfig
F: configs/q8_a33_tablet_1024x600_defconfig
@ -97,6 +102,11 @@ F: include/configs/sun7i.h
F: configs/Cubieboard2_defconfig
F: configs/Cubietruck_defconfig
CUBIETRUCK-PLUS BOARD
M: Chen-Yu Tsai <wens@csie.org>
S: Maintained
F: configs/Cubietruck_plus_defconfig
GEMEI-G9 TABLET
M: Priit Laes <plaes@plaes.org>
S: Maintained
@ -112,6 +122,16 @@ M: Chen-Yu Tsai <wens@csie.org>
S: Maintained
F: configs/Hummingbird_A31_defconfig
ICnova-A20-SWAC BOARD
M: Stefan Roese <sr@denx.de>
S: Maintained
F: configs/icnova-a20-swac_defconfig
ITEAD IBOX BOARD
M: Marcus Cooper <codekipper@gmail.com>
S: Maintained
F: configs/Itead_Ibox_A20_defconfig
INET 3F BOARD
M: Paul Kocialkowski <contact@paulk.fr>
S: Maintained
@ -177,6 +197,12 @@ M: Siarhei Siamashka <siarhei.siamashka@gmail.com>
S: Maintained
F: configs/MSI_Primo81_defconfig
SINLINX SINA31s BOARD
M: Chen-Yu Tsai <wens@csie.org>
S: Maintained
F: configs/Sinlinx_SinA31s_defconfig
W: http://linux-sunxi.org/Sinlinx_SinA31s
SINLINX SINA33 BOARD
M: Chen-Yu Tsai <wens@csie.org>
S: Maintained
@ -197,3 +223,8 @@ YONES TOPTECH BD1078 BOARD
M: Paul Kocialkowski <contact@paulk.fr>
S: Maintained
F: configs/Yones_Toptech_BD1078_defconfig
YONES TOPTECH BS1078 V2 BOARD
M: Peter Korsgaard <peter@korsgaard.com>
S: Maintained
F: configs/Yones_Toptech_BS1078_V2_defconfig

8
board/sunxi/ahci.c
View File

@ -72,14 +72,6 @@ static int sunxi_ahci_phy_init(u32 base)
void scsi_init(void)
{
printf("SUNXI SCSI INIT\n");
#ifdef CONFIG_SATAPWR
gpio_request(CONFIG_SATAPWR, "satapwr");
gpio_direction_output(CONFIG_SATAPWR, 1);
/* Give attached sata device time to power-up to avoid link timeouts */
mdelay(500);
#endif
if (sunxi_ahci_phy_init(SUNXI_SATA_BASE) < 0)
return;

18
board/sunxi/board.c
View File

@ -90,6 +90,15 @@ int board_init(void)
if (ret)
return ret;
#ifdef CONFIG_SATAPWR
gpio_request(CONFIG_SATAPWR, "satapwr");
gpio_direction_output(CONFIG_SATAPWR, 1);
#endif
#ifdef CONFIG_MACPWR
gpio_request(CONFIG_MACPWR, "macpwr");
gpio_direction_output(CONFIG_MACPWR, 1);
#endif
/* Uses dm gpio code so do this here and not in i2c_init_board() */
return soft_i2c_board_init();
}
@ -598,11 +607,14 @@ int misc_init_r(void)
}
#endif
#ifdef CONFIG_OF_BOARD_SETUP
int ft_board_setup(void *blob, bd_t *bd)
{
int __maybe_unused r;
#ifdef CONFIG_VIDEO_DT_SIMPLEFB
return sunxi_simplefb_setup(blob);
r = sunxi_simplefb_setup(blob);
if (r)
return r;
#endif
return 0;
}
#endif /* CONFIG_OF_BOARD_SETUP */

14
board/sunxi/gmac.c
View File

@ -6,7 +6,7 @@
#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
int sunxi_gmac_initialize(bd_t *bis)
void eth_init_board(void)
{
int pin;
struct sunxi_ccm_reg *const ccm =
@ -79,16 +79,4 @@ int sunxi_gmac_initialize(bd_t *bis)
for (pin = SUNXI_GPA(26); pin <= SUNXI_GPA(27); pin++)
sunxi_gpio_set_cfgpin(pin, SUN6I_GPA_GMAC);
#endif
#ifdef CONFIG_DM_ETH
return 0;
#else
# ifdef CONFIG_RGMII
return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_RGMII);
# elif defined CONFIG_GMII
return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_GMII);
# else
return designware_initialize(SUNXI_GMAC_BASE, PHY_INTERFACE_MODE_MII);
# endif
#endif
}

6
common/spl/spl.c
View File

@ -210,9 +210,9 @@ struct boot_device_name boot_name_table[] = {
{ BOOT_DEVICE_RAM, "RAM" },
#endif
#ifdef CONFIG_SPL_MMC_SUPPORT
{ BOOT_DEVICE_MMC1, "MMC" },
{ BOOT_DEVICE_MMC2, "MMC" },
{ BOOT_DEVICE_MMC2_2, "MMC" },
{ BOOT_DEVICE_MMC1, "MMC1" },
{ BOOT_DEVICE_MMC2, "MMC2" },
{ BOOT_DEVICE_MMC2_2, "MMC2_2" },
#endif
#ifdef CONFIG_SPL_NAND_SUPPORT
{ BOOT_DEVICE_NAND, "NAND" },

1
configs/A10-OLinuXino-Lime_defconfig
View File

@ -8,7 +8,6 @@ CONFIG_MMC0_CD_PIN="PH1"
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set

1
configs/A10s-OLinuXino-M_defconfig
View File

@ -9,7 +9,6 @@ CONFIG_USB1_VBUS_PIN="PB10"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-olinuxino-micro"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set

1
configs/A13-OLinuXinoM_defconfig
View File

@ -13,7 +13,6 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino-micro"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set

1
configs/A13-OLinuXino_defconfig
View File

@ -15,7 +15,6 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set

1
configs/A20-OLinuXino-Lime2_defconfig
View File

@ -8,7 +8,6 @@ CONFIG_USB0_VBUS_DET="PH5"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set

1
configs/A20-OLinuXino-Lime_defconfig
View File

@ -6,7 +6,6 @@ CONFIG_MMC0_CD_PIN="PH1"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set

1
configs/A20-OLinuXino_MICRO_defconfig
View File

@ -9,7 +9,6 @@ CONFIG_VIDEO_VGA=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set

1
configs/A20-Olimex-SOM-EVB_defconfig
View File

@ -11,7 +11,6 @@ CONFIG_USB0_VBUS_DET="PH5"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som-evb"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set

1
configs/Ainol_AW1_defconfig
View File

@ -14,7 +14,6 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-ainol-aw1"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_OF_BOARD_SETUP=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set

1
configs/Ampe_A76_defconfig
View File

@ -15,7 +15,6 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-ampe-a76"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set

1
configs/Auxtek-T003_defconfig
View File

@ -8,7 +8,6 @@ CONFIG_VIDEO_COMPOSITE=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t003"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_OF_BOARD_SETUP=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set

1
configs/Auxtek-T004_defconfig
View File

@ -6,7 +6,6 @@ CONFIG_USB1_VBUS_PIN="PG13"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t004"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_OF_BOARD_SETUP=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set

1
configs/Bananapi_defconfig
View File

@ -7,7 +7,6 @@ CONFIG_GMAC_TX_DELAY=3
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set

Some files were not shown because too many files have changed in this diff Show More