Merge branch 'master' of git://www.denx.de/git/u-boot-imx

This commit is contained in:
Tom Rini 2015-10-02 09:38:44 -04:00
commit b8d242121d
53 changed files with 1210 additions and 227 deletions

8
README
View file

@ -2359,16 +2359,20 @@ CBFS (Coreboot Filesystem) support
- drivers/i2c/i2c_mxc.c
- activate this driver with CONFIG_SYS_I2C_MXC
- enable bus 1 with CONFIG_SYS_I2C_MXC_I2C1
- enable bus 2 with CONFIG_SYS_I2C_MXC_I2C2
- enable bus 3 with CONFIG_SYS_I2C_MXC_I2C3
- enable bus 4 with CONFIG_SYS_I2C_MXC_I2C4
- define speed for bus 1 with CONFIG_SYS_MXC_I2C1_SPEED
- define slave for bus 1 with CONFIG_SYS_MXC_I2C1_SLAVE
- define speed for bus 2 with CONFIG_SYS_MXC_I2C2_SPEED
- define slave for bus 2 with CONFIG_SYS_MXC_I2C2_SLAVE
- define speed for bus 3 with CONFIG_SYS_MXC_I2C3_SPEED
- define slave for bus 3 with CONFIG_SYS_MXC_I2C3_SLAVE
- define speed for bus 4 with CONFIG_SYS_MXC_I2C4_SPEED
- define slave for bus 4 with CONFIG_SYS_MXC_I2C4_SLAVE
If those defines are not set, default value is 100000
for speed, and 0 for slave.
- enable bus 3 with CONFIG_SYS_I2C_MXC_I2C3
- enable bus 4 with CONFIG_SYS_I2C_MXC_I2C4
- drivers/i2c/rcar_i2c.c:
- activate this driver with CONFIG_SYS_I2C_RCAR

View file

@ -538,6 +538,10 @@ config TARGET_COLIBRI_VF
bool "Support Colibri VF50/61"
select CPU_V7
config TARGET_PCM052
bool "Support pcm-052"
select CPU_V7
config ARCH_ZYNQ
bool "Xilinx Zynq Platform"
select CPU_V7
@ -753,6 +757,7 @@ source "board/maxbcm/Kconfig"
source "board/mpl/vcma9/Kconfig"
source "board/olimex/mx23_olinuxino/Kconfig"
source "board/phytec/pcm051/Kconfig"
source "board/phytec/pcm052/Kconfig"
source "board/ppcag/bg0900/Kconfig"
source "board/samsung/smdk2410/Kconfig"
source "board/sandisk/sansa_fuze_plus/Kconfig"

View file

@ -535,6 +535,8 @@ int enable_fec_anatop_clock(int fec_id, enum enet_freq freq)
if (freq < ENET_25MHZ || freq > ENET_125MHZ)
return -EINVAL;
reg = readl(&anatop->pll_enet);
if (fec_id == 0) {
reg &= ~BM_ANADIG_PLL_ENET_DIV_SELECT;
reg |= BF_ANADIG_PLL_ENET_DIV_SELECT(freq);

View file

@ -12,9 +12,9 @@
#include <asm/arch/iomux-vf610.h>
#include <asm/arch/ddrmc-vf610.h>
void ddrmc_setup_iomux(void)
void ddrmc_setup_iomux(const iomux_v3_cfg_t *pads, int pads_count)
{
static const iomux_v3_cfg_t ddr_pads[] = {
static const iomux_v3_cfg_t default_pads[] = {
VF610_PAD_DDR_A15__DDR_A_15,
VF610_PAD_DDR_A14__DDR_A_14,
VF610_PAD_DDR_A13__DDR_A_13,
@ -65,76 +65,54 @@ void ddrmc_setup_iomux(void)
VF610_PAD_DDR_RESETB,
};
imx_iomux_v3_setup_multiple_pads(ddr_pads, ARRAY_SIZE(ddr_pads));
if ((pads == NULL) || (pads_count == 0)) {
pads = default_pads;
pads_count = ARRAY_SIZE(default_pads);
}
imx_iomux_v3_setup_multiple_pads(pads, pads_count);
}
void ddrmc_phy_init(void)
{
struct ddrmr_regs *ddrmr = (struct ddrmr_regs *)DDR_BASE_ADDR;
static struct ddrmc_phy_setting default_phy_settings[] = {
{ DDRMC_PHY_DQ_TIMING, 0 },
{ DDRMC_PHY_DQ_TIMING, 16 },
{ DDRMC_PHY_DQ_TIMING, 32 },
writel(DDRMC_PHY_DQ_TIMING, &ddrmr->phy[0]);
writel(DDRMC_PHY_DQ_TIMING, &ddrmr->phy[16]);
writel(DDRMC_PHY_DQ_TIMING, &ddrmr->phy[32]);
{ DDRMC_PHY_DQS_TIMING, 1 },
{ DDRMC_PHY_DQS_TIMING, 17 },
writel(DDRMC_PHY_DQS_TIMING, &ddrmr->phy[1]);
writel(DDRMC_PHY_DQS_TIMING, &ddrmr->phy[17]);
{ DDRMC_PHY_CTRL, 2 },
{ DDRMC_PHY_CTRL, 18 },
{ DDRMC_PHY_CTRL, 34 },
writel(DDRMC_PHY_CTRL, &ddrmr->phy[2]);
writel(DDRMC_PHY_CTRL, &ddrmr->phy[18]);
writel(DDRMC_PHY_CTRL, &ddrmr->phy[34]);
{ DDRMC_PHY_MASTER_CTRL, 3 },
{ DDRMC_PHY_MASTER_CTRL, 19 },
{ DDRMC_PHY_MASTER_CTRL, 35 },
writel(DDRMC_PHY_MASTER_CTRL, &ddrmr->phy[3]);
writel(DDRMC_PHY_MASTER_CTRL, &ddrmr->phy[19]);
writel(DDRMC_PHY_MASTER_CTRL, &ddrmr->phy[35]);
writel(DDRMC_PHY_SLAVE_CTRL, &ddrmr->phy[4]);
writel(DDRMC_PHY_SLAVE_CTRL, &ddrmr->phy[20]);
writel(DDRMC_PHY_SLAVE_CTRL, &ddrmr->phy[36]);
{ DDRMC_PHY_SLAVE_CTRL, 4 },
{ DDRMC_PHY_SLAVE_CTRL, 20 },
{ DDRMC_PHY_SLAVE_CTRL, 36 },
/* LPDDR2 only parameter */
writel(DDRMC_PHY_OFF, &ddrmr->phy[49]);
{ DDRMC_PHY_OFF, 49 },
writel(DDRMC_PHY50_DDR3_MODE |
DDRMC_PHY50_EN_SW_HALF_CYCLE, &ddrmr->phy[50]);
{ DDRMC_PHY50_DDR3_MODE | DDRMC_PHY50_EN_SW_HALF_CYCLE, 50 },
/* Processor Pad ODT settings */
writel(DDRMC_PHY_PROC_PAD_ODT, &ddrmr->phy[52]);
}
{ DDRMC_PHY_PROC_PAD_ODT, 52 },
static void ddrmc_ctrl_lvl_init(struct ddrmc_lvl_info *lvl)
{
struct ddrmr_regs *ddrmr = (struct ddrmr_regs *)DDR_BASE_ADDR;
u32 cr102 = 0, cr105 = 0, cr106 = 0, cr110 = 0;
if (lvl->wrlvl_reg_en) {
writel(DDRMC_CR97_WRLVL_EN, &ddrmr->cr[97]);
writel(DDRMC_CR98_WRLVL_DL_0(lvl->wrlvl_dl_0), &ddrmr->cr[98]);
writel(DDRMC_CR99_WRLVL_DL_1(lvl->wrlvl_dl_1), &ddrmr->cr[99]);
}
if (lvl->rdlvl_reg_en) {
cr102 |= DDRMC_CR102_RDLVL_REG_EN;
cr105 |= DDRMC_CR105_RDLVL_DL_0(lvl->rdlvl_dl_0);
cr110 |= DDRMC_CR110_RDLVL_DL_1(lvl->rdlvl_dl_1);
}
if (lvl->rdlvl_gt_reg_en) {
cr102 |= DDRMC_CR102_RDLVL_GT_REGEN;
cr106 |= DDRMC_CR106_RDLVL_GTDL_0(lvl->rdlvl_gt_dl_0);
cr110 |= DDRMC_CR110_RDLVL_GTDL_1(lvl->rdlvl_gt_dl_1);
}
writel(cr102, &ddrmr->cr[102]);
writel(cr105, &ddrmr->cr[105]);
writel(cr106, &ddrmr->cr[106]);
writel(cr110, &ddrmr->cr[110]);
}
/* end marker */
{ 0, -1 }
};
void ddrmc_ctrl_init_ddr3(struct ddr3_jedec_timings const *timings,
struct ddrmc_lvl_info *lvl,
int col_diff, int row_diff)
struct ddrmc_cr_setting *board_cr_settings,
struct ddrmc_phy_setting *board_phy_settings,
int col_diff, int row_diff)
{
struct ddrmr_regs *ddrmr = (struct ddrmr_regs *)DDR_BASE_ADDR;
struct ddrmc_cr_setting *cr_setting;
struct ddrmc_phy_setting *phy_setting;
writel(DDRMC_CR00_DRAM_CLASS_DDR3, &ddrmr->cr[0]);
writel(DDRMC_CR02_DRAM_TINIT(timings->tinit), &ddrmr->cr[2]);
@ -144,7 +122,9 @@ void ddrmc_ctrl_init_ddr3(struct ddr3_jedec_timings const *timings,
writel(DDRMC_CR12_WRLAT(timings->wrlat) |
DDRMC_CR12_CASLAT_LIN(timings->caslat_lin), &ddrmr->cr[12]);
writel(DDRMC_CR13_TRC(timings->trc) | DDRMC_CR13_TRRD(timings->trrd) |
DDRMC_CR13_TCCD(timings->tccd), &ddrmr->cr[13]);
DDRMC_CR13_TCCD(timings->tccd) |
DDRMC_CR13_TBST_INT_INTERVAL(timings->tbst_int_interval),
&ddrmr->cr[13]);
writel(DDRMC_CR14_TFAW(timings->tfaw) | DDRMC_CR14_TRP(timings->trp) |
DDRMC_CR14_TWTR(timings->twtr) |
DDRMC_CR14_TRAS_MIN(timings->tras_min), &ddrmr->cr[14]);
@ -156,18 +136,19 @@ void ddrmc_ctrl_init_ddr3(struct ddr3_jedec_timings const *timings,
DDRMC_CR18_TCKE(timings->tcke), &ddrmr->cr[18]);
writel(DDRMC_CR20_AP_EN, &ddrmr->cr[20]);
writel(DDRMC_CR21_TRCD_INT(timings->trcd_int) |
DDRMC_CR21_CCMAP_EN, &ddrmr->cr[21]);
writel(DDRMC_CR21_TRCD_INT(timings->trcd_int) | DDRMC_CR21_CCMAP_EN |
DDRMC_CR21_TRAS_LOCKOUT(timings->tras_lockout),
&ddrmr->cr[21]);
writel(DDRMC_CR22_TDAL(timings->tdal), &ddrmr->cr[22]);
writel(DDRMC_CR23_BSTLEN(3) |
writel(DDRMC_CR23_BSTLEN(timings->bstlen) |
DDRMC_CR23_TDLL(timings->tdll), &ddrmr->cr[23]);
writel(DDRMC_CR24_TRP_AB(timings->trp_ab), &ddrmr->cr[24]);
writel(DDRMC_CR25_TREF_EN, &ddrmr->cr[25]);
writel(DDRMC_CR26_TREF(timings->tref) |
DDRMC_CR26_TRFC(timings->trfc), &ddrmr->cr[26]);
writel(DDRMC_CR28_TREF_INT(0), &ddrmr->cr[28]);
writel(DDRMC_CR28_TREF_INT(timings->tref_int), &ddrmr->cr[28]);
writel(DDRMC_CR29_TPDEX(timings->tpdex), &ddrmr->cr[29]);
writel(DDRMC_CR30_TXPDLL(timings->txpdll), &ddrmr->cr[30]);
@ -177,7 +158,7 @@ void ddrmc_ctrl_init_ddr3(struct ddr3_jedec_timings const *timings,
writel(DDRMC_CR34_CKSRX(timings->cksrx) |
DDRMC_CR34_CKSRE(timings->cksre), &ddrmr->cr[34]);
writel(DDRMC_CR38_FREQ_CHG_EN(0), &ddrmr->cr[38]);
writel(DDRMC_CR38_FREQ_CHG_EN(timings->freq_chg_en), &ddrmr->cr[38]);
writel(DDRMC_CR39_PHY_INI_COM(1024) | DDRMC_CR39_PHY_INI_STA(16) |
DDRMC_CR39_FRQ_CH_DLLOFF(2), &ddrmr->cr[39]);
@ -191,13 +172,14 @@ void ddrmc_ctrl_init_ddr3(struct ddr3_jedec_timings const *timings,
writel(DDRMC_CR69_ZQ_ON_SREF_EX(2), &ddrmr->cr[69]);
writel(DDRMC_CR70_REF_PER_ZQ(timings->ref_per_zq), &ddrmr->cr[70]);
writel(DDRMC_CR72_ZQCS_ROTATE(0), &ddrmr->cr[72]);
writel(DDRMC_CR72_ZQCS_ROTATE(timings->zqcs_rotate), &ddrmr->cr[72]);
writel(DDRMC_CR73_APREBIT(timings->aprebit) |
DDRMC_CR73_COL_DIFF(col_diff) |
DDRMC_CR73_ROW_DIFF(row_diff), &ddrmr->cr[73]);
writel(DDRMC_CR74_BANKSPLT_EN | DDRMC_CR74_ADDR_CMP_EN |
DDRMC_CR74_CMD_AGE_CNT(64) | DDRMC_CR74_AGE_CNT(64),
DDRMC_CR74_CMD_AGE_CNT(timings->cmd_age_cnt) |
DDRMC_CR74_AGE_CNT(timings->age_cnt),
&ddrmr->cr[74]);
writel(DDRMC_CR75_RW_PG_EN | DDRMC_CR75_RW_EN | DDRMC_CR75_PRI_EN |
DDRMC_CR75_PLEN, &ddrmr->cr[75]);
@ -205,13 +187,15 @@ void ddrmc_ctrl_init_ddr3(struct ddr3_jedec_timings const *timings,
DDRMC_CR76_W2R_SPLT_EN, &ddrmr->cr[76]);
writel(DDRMC_CR77_CS_MAP | DDRMC_CR77_DI_RD_INTLEAVE |
DDRMC_CR77_SWAP_EN, &ddrmr->cr[77]);
writel(DDRMC_CR78_Q_FULLNESS(7) |
writel(DDRMC_CR78_Q_FULLNESS(timings->q_fullness) |
DDRMC_CR78_BUR_ON_FLY_BIT(12), &ddrmr->cr[78]);
writel(DDRMC_CR79_CTLUPD_AREF(0), &ddrmr->cr[79]);
writel(DDRMC_CR82_INT_MASK, &ddrmr->cr[82]);
writel(DDRMC_CR87_ODT_WR_MAPCS0, &ddrmr->cr[87]);
writel(DDRMC_CR87_ODT_RD_MAPCS0(timings->odt_rd_mapcs0) |
DDRMC_CR87_ODT_WR_MAPCS0(timings->odt_wr_mapcs0),
&ddrmr->cr[87]);
writel(DDRMC_CR88_TODTL_CMD(4), &ddrmr->cr[88]);
writel(DDRMC_CR89_AODT_RWSMCS(2), &ddrmr->cr[89]);
@ -219,58 +203,33 @@ void ddrmc_ctrl_init_ddr3(struct ddr3_jedec_timings const *timings,
writel(DDRMC_CR96_WLMRD(timings->wlmrd) |
DDRMC_CR96_WLDQSEN(timings->wldqsen), &ddrmr->cr[96]);
if (lvl != NULL)
ddrmc_ctrl_lvl_init(lvl);
/* execute custom CR setting sequence (may be NULL) */
cr_setting = board_cr_settings;
if (cr_setting != NULL)
while (cr_setting->cr_rnum >= 0) {
writel(cr_setting->setting,
&ddrmr->cr[cr_setting->cr_rnum]);
cr_setting++;
}
writel(DDRMC_CR117_AXI0_W_PRI(0) |
DDRMC_CR117_AXI0_R_PRI(0), &ddrmr->cr[117]);
writel(DDRMC_CR118_AXI1_W_PRI(1) |
DDRMC_CR118_AXI1_R_PRI(1), &ddrmr->cr[118]);
/* perform default PHY settings (may be overriden by custom settings */
phy_setting = default_phy_settings;
while (phy_setting->phy_rnum >= 0) {
writel(phy_setting->setting,
&ddrmr->phy[phy_setting->phy_rnum]);
phy_setting++;
}
writel(DDRMC_CR120_AXI0_PRI1_RPRI(2) |
DDRMC_CR120_AXI0_PRI0_RPRI(2), &ddrmr->cr[120]);
writel(DDRMC_CR121_AXI0_PRI3_RPRI(2) |
DDRMC_CR121_AXI0_PRI2_RPRI(2), &ddrmr->cr[121]);
writel(DDRMC_CR122_AXI1_PRI1_RPRI(1) | DDRMC_CR122_AXI1_PRI0_RPRI(1) |
DDRMC_CR122_AXI0_PRIRLX(100), &ddrmr->cr[122]);
writel(DDRMC_CR123_AXI1_P_ODR_EN | DDRMC_CR123_AXI1_PRI3_RPRI(1) |
DDRMC_CR123_AXI1_PRI2_RPRI(1), &ddrmr->cr[123]);
writel(DDRMC_CR124_AXI1_PRIRLX(100), &ddrmr->cr[124]);
writel(DDRMC_CR126_PHY_RDLAT(8), &ddrmr->cr[126]);
writel(DDRMC_CR132_WRLAT_ADJ(5) |
DDRMC_CR132_RDLAT_ADJ(6), &ddrmr->cr[132]);
writel(DDRMC_CR137_PHYCTL_DL(2), &ddrmr->cr[137]);
writel(DDRMC_CR138_PHY_WRLV_MXDL(256) |
DDRMC_CR138_PHYDRAM_CK_EN(1), &ddrmr->cr[138]);
writel(DDRMC_CR139_PHY_WRLV_RESPLAT(4) | DDRMC_CR139_PHY_WRLV_LOAD(7) |
DDRMC_CR139_PHY_WRLV_DLL(3) |
DDRMC_CR139_PHY_WRLV_EN(3), &ddrmr->cr[139]);
writel(DDRMC_CR140_PHY_WRLV_WW(64), &ddrmr->cr[140]);
writel(DDRMC_CR143_RDLV_GAT_MXDL(1536) |
DDRMC_CR143_RDLV_MXDL(128), &ddrmr->cr[143]);
writel(DDRMC_CR144_PHY_RDLVL_RES(4) | DDRMC_CR144_PHY_RDLV_LOAD(7) |
DDRMC_CR144_PHY_RDLV_DLL(3) |
DDRMC_CR144_PHY_RDLV_EN(3), &ddrmr->cr[144]);
writel(DDRMC_CR145_PHY_RDLV_RR(64), &ddrmr->cr[145]);
writel(DDRMC_CR146_PHY_RDLVL_RESP(64), &ddrmr->cr[146]);
writel(DDRMC_CR147_RDLV_RESP_MASK(983040), &ddrmr->cr[147]);
writel(DDRMC_CR148_RDLV_GATE_RESP_MASK(983040), &ddrmr->cr[148]);
writel(DDRMC_CR151_RDLV_GAT_DQ_ZERO_CNT(1) |
DDRMC_CR151_RDLVL_DQ_ZERO_CNT(1), &ddrmr->cr[151]);
writel(DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(13) |
DDRMC_CR154_PAD_ZQ_MODE(1) |
DDRMC_CR154_DDR_SEL_PAD_CONTR(3) |
DDRMC_CR154_PAD_ZQ_HW_FOR(1), &ddrmr->cr[154]);
writel(DDRMC_CR155_PAD_ODT_BYTE1(2) |
DDRMC_CR155_PAD_ODT_BYTE0(2), &ddrmr->cr[155]);
writel(DDRMC_CR158_TWR(6), &ddrmr->cr[158]);
writel(DDRMC_CR161_ODT_EN(1) | DDRMC_CR161_TODTH_RD(2) |
DDRMC_CR161_TODTH_WR(2), &ddrmr->cr[161]);
ddrmc_phy_init();
/* execute custom PHY setting sequence (may be NULL) */
phy_setting = board_phy_settings;
if (phy_setting != NULL)
while (phy_setting->phy_rnum >= 0) {
writel(phy_setting->setting,
&ddrmr->phy[phy_setting->phy_rnum]);
phy_setting++;
}
/* all inits done, start the DDR controller */
writel(DDRMC_CR00_DRAM_CLASS_DDR3 | DDRMC_CR00_START, &ddrmr->cr[0]);
while (!(readl(&ddrmr->cr[80]) && 0x100))

View file

@ -11,18 +11,6 @@
#ifndef __ASM_ARCH_VF610_DDRMC_H
#define __ASM_ARCH_VF610_DDRMC_H
struct ddrmc_lvl_info {
u16 wrlvl_reg_en;
u16 wrlvl_dl_0;
u16 wrlvl_dl_1;
u16 rdlvl_gt_reg_en;
u16 rdlvl_gt_dl_0;
u16 rdlvl_gt_dl_1;
u16 rdlvl_reg_en;
u16 rdlvl_dl_0;
u16 rdlvl_dl_1;
};
struct ddr3_jedec_timings {
u8 tinit;
u32 trst_pwron;
@ -32,6 +20,7 @@ struct ddr3_jedec_timings {
u8 trc;
u8 trrd;
u8 tccd;
u8 tbst_int_interval;
u8 tfaw;
u8 trp;
u8 twtr;
@ -43,30 +32,51 @@ struct ddr3_jedec_timings {
u8 tckesr;
u8 tcke;
u8 trcd_int;
u8 tras_lockout;
u8 tdal;
u8 bstlen;
u16 tdll;
u8 trp_ab;
u16 tref;
u8 trfc;
u16 tref_int;
u8 tpdex;
u8 txpdll;
u8 txsnr;
u16 txsr;
u8 cksrx;
u8 cksre;
u8 freq_chg_en;
u16 zqcl;
u16 zqinit;
u8 zqcs;
u8 ref_per_zq;
u8 zqcs_rotate;
u8 aprebit;
u8 cmd_age_cnt;
u8 age_cnt;
u8 q_fullness;
u8 odt_rd_mapcs0;
u8 odt_wr_mapcs0;
u8 wlmrd;
u8 wldqsen;
};
void ddrmc_setup_iomux(void);
struct ddrmc_cr_setting {
u32 setting;
int cr_rnum; /* CR register ; -1 for last entry */
};
struct ddrmc_phy_setting {
u32 setting;
int phy_rnum; /* PHY register ; -1 for last entry */
};
void ddrmc_setup_iomux(const iomux_v3_cfg_t *pads, int pads_count);
void ddrmc_phy_init(void);
void ddrmc_ctrl_init_ddr3(struct ddr3_jedec_timings const *timings,
struct ddrmc_lvl_info *lvl,
int col_diff, int row_diff);
struct ddrmc_cr_setting *board_cr_settings,
struct ddrmc_phy_setting *board_phy_settings,
int col_diff, int row_diff);
#endif

View file

@ -148,7 +148,7 @@
#define DDRMC_CR18_TCKE(v) ((v) & 0x7)
#define DDRMC_CR20_AP_EN (1 << 24)
#define DDRMC_CR21_TRCD_INT(v) (((v) & 0xff) << 16)
#define DDRMC_CR21_TRAS_LOCKOUT (1 << 8)
#define DDRMC_CR21_TRAS_LOCKOUT(v) ((v) << 8)
#define DDRMC_CR21_CCMAP_EN 1
#define DDRMC_CR22_TDAL(v) (((v) & 0x3f) << 16)
#define DDRMC_CR23_BSTLEN(v) (((v) & 0x7) << 24)
@ -200,8 +200,8 @@
#define DDRMC_CR78_BUR_ON_FLY_BIT(v) ((v) & 0xf)
#define DDRMC_CR79_CTLUPD_AREF(v) (((v) & 0x1) << 24)
#define DDRMC_CR82_INT_MASK 0x10000000
#define DDRMC_CR87_ODT_WR_MAPCS0 (1 << 24)
#define DDRMC_CR87_ODT_RD_MAPCS0 (1 << 16)
#define DDRMC_CR87_ODT_WR_MAPCS0(v) ((v) << 24)
#define DDRMC_CR87_ODT_RD_MAPCS0(v) ((v) << 16)
#define DDRMC_CR88_TODTL_CMD(v) (((v) & 0x1f) << 16)
#define DDRMC_CR89_AODT_RWSMCS(v) ((v) & 0xf)
#define DDRMC_CR91_R2W_SMCSDL(v) (((v) & 0x7) << 16)

View file

@ -28,63 +28,117 @@ DECLARE_GLOBAL_DATA_PTR;
#define ENET_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_HIGH | \
PAD_CTL_DSE_50ohm | PAD_CTL_OBE_IBE_ENABLE)
static struct ddrmc_cr_setting vf610twr_cr_settings[] = {
/* levelling */
{ DDRMC_CR97_WRLVL_EN, 97 },
{ DDRMC_CR98_WRLVL_DL_0(0), 98 },
{ DDRMC_CR99_WRLVL_DL_1(0), 99 },
{ DDRMC_CR102_RDLVL_REG_EN | DDRMC_CR102_RDLVL_GT_REGEN, 102 },
{ DDRMC_CR105_RDLVL_DL_0(0), 105 },
{ DDRMC_CR106_RDLVL_GTDL_0(4), 106 },
{ DDRMC_CR110_RDLVL_DL_1(0) | DDRMC_CR110_RDLVL_GTDL_1(4), 110 },
/* AXI */
{ DDRMC_CR117_AXI0_W_PRI(0) | DDRMC_CR117_AXI0_R_PRI(0), 117 },
{ DDRMC_CR118_AXI1_W_PRI(1) | DDRMC_CR118_AXI1_R_PRI(1), 118 },
{ DDRMC_CR120_AXI0_PRI1_RPRI(2) |
DDRMC_CR120_AXI0_PRI0_RPRI(2), 120 },
{ DDRMC_CR121_AXI0_PRI3_RPRI(2) |
DDRMC_CR121_AXI0_PRI2_RPRI(2), 121 },
{ DDRMC_CR122_AXI1_PRI1_RPRI(1) | DDRMC_CR122_AXI1_PRI0_RPRI(1) |
DDRMC_CR122_AXI0_PRIRLX(100), 122 },
{ DDRMC_CR123_AXI1_P_ODR_EN | DDRMC_CR123_AXI1_PRI3_RPRI(1) |
DDRMC_CR123_AXI1_PRI2_RPRI(1), 123 },
{ DDRMC_CR124_AXI1_PRIRLX(100), 124 },
{ DDRMC_CR126_PHY_RDLAT(8), 126 },
{ DDRMC_CR132_WRLAT_ADJ(5) |
DDRMC_CR132_RDLAT_ADJ(6), 132 },
{ DDRMC_CR137_PHYCTL_DL(2), 137 },
{ DDRMC_CR138_PHY_WRLV_MXDL(256) |
DDRMC_CR138_PHYDRAM_CK_EN(1), 138 },
{ DDRMC_CR139_PHY_WRLV_RESPLAT(4) | DDRMC_CR139_PHY_WRLV_LOAD(7) |
DDRMC_CR139_PHY_WRLV_DLL(3) |
DDRMC_CR139_PHY_WRLV_EN(3), 139 },
{ DDRMC_CR140_PHY_WRLV_WW(64), 140 },
{ DDRMC_CR143_RDLV_GAT_MXDL(1536) |
DDRMC_CR143_RDLV_MXDL(128), 143 },
{ DDRMC_CR144_PHY_RDLVL_RES(4) | DDRMC_CR144_PHY_RDLV_LOAD(7) |
DDRMC_CR144_PHY_RDLV_DLL(3) |
DDRMC_CR144_PHY_RDLV_EN(3), 144 },
{ DDRMC_CR145_PHY_RDLV_RR(64), 145 },
{ DDRMC_CR146_PHY_RDLVL_RESP(64), 146 },
{ DDRMC_CR147_RDLV_RESP_MASK(983040), 147 },
{ DDRMC_CR148_RDLV_GATE_RESP_MASK(983040), 148 },
{ DDRMC_CR151_RDLV_GAT_DQ_ZERO_CNT(1) |
DDRMC_CR151_RDLVL_DQ_ZERO_CNT(1), 151 },
{ DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(13) |
DDRMC_CR154_PAD_ZQ_MODE(1) |
DDRMC_CR154_DDR_SEL_PAD_CONTR(3) |
DDRMC_CR154_PAD_ZQ_HW_FOR(1), 154 },
{ DDRMC_CR155_PAD_ODT_BYTE1(1) | DDRMC_CR155_PAD_ODT_BYTE0(1), 155 },
{ DDRMC_CR158_TWR(6), 158 },
{ DDRMC_CR161_ODT_EN(1) | DDRMC_CR161_TODTH_RD(2) |
DDRMC_CR161_TODTH_WR(2), 161 },
/* end marker */
{ 0, -1 }
};
int dram_init(void)
{
struct ddrmc_lvl_info lvl = {
.wrlvl_reg_en = 1,
.wrlvl_dl_0 = 0,
.wrlvl_dl_1 = 0,
.rdlvl_gt_reg_en = 1,
.rdlvl_gt_dl_0 = 4,
.rdlvl_gt_dl_1 = 4,
.rdlvl_reg_en = 1,
.rdlvl_dl_0 = 0,
.rdlvl_dl_1 = 0,
};
static const struct ddr3_jedec_timings timings = {
.tinit = 5,
.trst_pwron = 80000,
.cke_inactive = 200000,
.wrlat = 5,
.caslat_lin = 12,
.trc = 21,
.trrd = 4,
.tccd = 4,
.tfaw = 20,
.trp = 6,
.twtr = 4,
.tras_min = 15,
.tmrd = 4,
.trtp = 4,
.tras_max = 28080,
.tmod = 12,
.tckesr = 4,
.tcke = 3,
.trcd_int = 6,
.tdal = 12,
.tdll = 512,
.trp_ab = 6,
.tref = 3120,
.trfc = 44,
.tpdex = 3,
.txpdll = 10,
.txsnr = 48,
.txsr = 468,
.cksrx = 5,
.cksre = 5,
.zqcl = 256,
.zqinit = 512,
.zqcs = 64,
.ref_per_zq = 64,
.aprebit = 10,
.wlmrd = 40,
.wldqsen = 25,
.tinit = 5,
.trst_pwron = 80000,
.cke_inactive = 200000,
.wrlat = 5,
.caslat_lin = 12,
.trc = 21,
.trrd = 4,
.tccd = 4,
.tbst_int_interval = 0,
.tfaw = 20,
.trp = 6,
.twtr = 4,
.tras_min = 15,
.tmrd = 4,
.trtp = 4,
.tras_max = 28080,
.tmod = 12,
.tckesr = 4,
.tcke = 3,
.trcd_int = 6,
.tras_lockout = 0,
.tdal = 12,
.bstlen = 0,
.tdll = 512,
.trp_ab = 6,
.tref = 3120,
.trfc = 44,
.tref_int = 0,
.tpdex = 3,
.txpdll = 10,
.txsnr = 48,
.txsr = 468,
.cksrx = 5,
.cksre = 5,
.freq_chg_en = 0,
.zqcl = 256,
.zqinit = 512,
.zqcs = 64,
.ref_per_zq = 64,
.zqcs_rotate = 0,
.aprebit = 10,
.cmd_age_cnt = 64,
.age_cnt = 64,
.q_fullness = 7,
.odt_rd_mapcs0 = 0,
.odt_wr_mapcs0 = 1,
.wlmrd = 40,
.wldqsen = 25,
};
ddrmc_setup_iomux();
ddrmc_setup_iomux(NULL, 0);
ddrmc_ctrl_init_ddr3(&timings, &lvl, 1, 3);
ddrmc_ctrl_init_ddr3(&timings, vf610twr_cr_settings, NULL, 1, 3);
gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
return 0;

View file

@ -0,0 +1,15 @@
if TARGET_PCM052
config SYS_BOARD
default "pcm052"
config SYS_VENDOR
default "phytec"
config SYS_SOC
default "vf610"
config SYS_CONFIG_NAME
default "pcm052"
endif

View file

@ -0,0 +1,6 @@
PCM052 BOARD
M: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
S: Maintained
F: board/phytec/pcm052/
F: include/configs/pcm052.h
F: configs/pcm052_defconfig

View file

@ -0,0 +1,7 @@
#
# Copyright 2013 Freescale Semiconductor, Inc.
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y := pcm052.o

View file

@ -0,0 +1,17 @@
/*
* Copyright 2015 3ADEV <http://www.3adev.com>
*
* SPDX-License-Identifier: GPL-2.0+
*
* Refer docs/README.imxmage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
*/
#include <asm/imx-common/imximage.cfg>
/* image version */
IMAGE_VERSION 2
/* Boot Offset 0x400, valid for both SD and NAND boot */
BOOT_OFFSET FLASH_OFFSET_STANDARD

View file

@ -0,0 +1,515 @@
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux-vf610.h>
#include <asm/arch/ddrmc-vf610.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/clock.h>
#include <mmc.h>
#include <fsl_esdhc.h>
#include <miiphy.h>
#include <netdev.h>
#include <i2c.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Default DDR pad settings in arch/arm/include/asm/arch-vf610/iomux-vf610.h
* do not match our settings. Let us (re)define our own settings here.
*/
#define PCM052_VF610_DDR_PAD_CTRL PAD_CTL_DSE_20ohm
#define PCM052_VF610_DDR_PAD_CTRL_1 (PAD_CTL_DSE_20ohm | \
PAD_CTL_INPUT_DIFFERENTIAL)
#define PCM052_VF610_DDR_RESET_PAD_CTL (PAD_CTL_DSE_150ohm | \
PAD_CTL_PUS_100K_UP | \
PAD_CTL_INPUT_DIFFERENTIAL)
enum {
PCM052_VF610_PAD_DDR_RESETB = IOMUX_PAD(0x021c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_RESET_PAD_CTL),
PCM052_VF610_PAD_DDR_A15__DDR_A_15 = IOMUX_PAD(0x0220, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_A14__DDR_A_14 = IOMUX_PAD(0x0224, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_A13__DDR_A_13 = IOMUX_PAD(0x0228, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_A12__DDR_A_12 = IOMUX_PAD(0x022c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_A11__DDR_A_11 = IOMUX_PAD(0x0230, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_A10__DDR_A_10 = IOMUX_PAD(0x0234, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_A9__DDR_A_9 = IOMUX_PAD(0x0238, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_A8__DDR_A_8 = IOMUX_PAD(0x023c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_A7__DDR_A_7 = IOMUX_PAD(0x0240, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_A6__DDR_A_6 = IOMUX_PAD(0x0244, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_A5__DDR_A_5 = IOMUX_PAD(0x0248, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_A4__DDR_A_4 = IOMUX_PAD(0x024c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_A3__DDR_A_3 = IOMUX_PAD(0x0250, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_A2__DDR_A_2 = IOMUX_PAD(0x0254, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_A1__DDR_A_1 = IOMUX_PAD(0x0258, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_A0__DDR_A_0 = IOMUX_PAD(0x025c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_BA2__DDR_BA_2 = IOMUX_PAD(0x0260, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_BA1__DDR_BA_1 = IOMUX_PAD(0x0264, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_BA0__DDR_BA_0 = IOMUX_PAD(0x0268, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_CAS__DDR_CAS_B = IOMUX_PAD(0x026c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_CKE__DDR_CKE_0 = IOMUX_PAD(0x0270, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_CLK__DDR_CLK_0 = IOMUX_PAD(0x0274, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL_1),
PCM052_VF610_PAD_DDR_CS__DDR_CS_B_0 = IOMUX_PAD(0x0278, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_D15__DDR_D_15 = IOMUX_PAD(0x027c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_D14__DDR_D_14 = IOMUX_PAD(0x0280, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_D13__DDR_D_13 = IOMUX_PAD(0x0284, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_D12__DDR_D_12 = IOMUX_PAD(0x0288, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_D11__DDR_D_11 = IOMUX_PAD(0x028c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_D10__DDR_D_10 = IOMUX_PAD(0x0290, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_D9__DDR_D_9 = IOMUX_PAD(0x0294, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_D8__DDR_D_8 = IOMUX_PAD(0x0298, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_D7__DDR_D_7 = IOMUX_PAD(0x029c, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_D6__DDR_D_6 = IOMUX_PAD(0x02a0, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_D5__DDR_D_5 = IOMUX_PAD(0x02a4, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_D4__DDR_D_4 = IOMUX_PAD(0x02a8, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_D3__DDR_D_3 = IOMUX_PAD(0x02ac, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_D2__DDR_D_2 = IOMUX_PAD(0x02b0, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_D1__DDR_D_1 = IOMUX_PAD(0x02b4, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_D0__DDR_D_0 = IOMUX_PAD(0x02b8, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_DQM1__DDR_DQM_1 = IOMUX_PAD(0x02bc, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_DQM0__DDR_DQM_0 = IOMUX_PAD(0x02c0, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_DQS1__DDR_DQS_1 = IOMUX_PAD(0x02c4, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL_1),
PCM052_VF610_PAD_DDR_DQS0__DDR_DQS_0 = IOMUX_PAD(0x02c8, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL_1),
PCM052_VF610_PAD_DDR_RAS__DDR_RAS_B = IOMUX_PAD(0x02cc, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_WE__DDR_WE_B = IOMUX_PAD(0x02d0, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_ODT1__DDR_ODT_0 = IOMUX_PAD(0x02d4, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_ODT0__DDR_ODT_1 = IOMUX_PAD(0x02d8, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1 = IOMUX_PAD(0x02dc, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
PCM052_VF610_PAD_DDR_DDRBYTE0__DDR_DDRBYTE0 = IOMUX_PAD(0x02e0, __NA_, 0, __NA_, 0, PCM052_VF610_DDR_PAD_CTRL),
};
static struct ddrmc_cr_setting pcm052_cr_settings[] = {
/* not in the datasheets, but in the original code */
{ 0x00002000, 105 },
{ 0x00000020, 110 },
/* AXI */
{ DDRMC_CR117_AXI0_W_PRI(1) | DDRMC_CR117_AXI0_R_PRI(1), 117 },
{ DDRMC_CR118_AXI1_W_PRI(1) | DDRMC_CR118_AXI1_R_PRI(1), 118 },
{ DDRMC_CR120_AXI0_PRI1_RPRI(2) |
DDRMC_CR120_AXI0_PRI0_RPRI(2), 120 },
{ DDRMC_CR121_AXI0_PRI3_RPRI(2) |
DDRMC_CR121_AXI0_PRI2_RPRI(2), 121 },
{ DDRMC_CR122_AXI1_PRI1_RPRI(1) | DDRMC_CR122_AXI1_PRI0_RPRI(1) |
DDRMC_CR122_AXI0_PRIRLX(100), 122 },
{ DDRMC_CR123_AXI1_P_ODR_EN | DDRMC_CR123_AXI1_PRI3_RPRI(1) |
DDRMC_CR123_AXI1_PRI2_RPRI(1), 123 },
{ DDRMC_CR124_AXI1_PRIRLX(100), 124 },
{ DDRMC_CR126_PHY_RDLAT(11), 126 },
{ DDRMC_CR132_WRLAT_ADJ(5) | DDRMC_CR132_RDLAT_ADJ(6), 132 },
{ DDRMC_CR137_PHYCTL_DL(2), 137 },
{ DDRMC_CR139_PHY_WRLV_RESPLAT(4) | DDRMC_CR139_PHY_WRLV_LOAD(7) |
DDRMC_CR139_PHY_WRLV_DLL(3) |
DDRMC_CR139_PHY_WRLV_EN(3), 139 },
{ DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(13) |
DDRMC_CR154_PAD_ZQ_MODE(1) |
DDRMC_CR154_DDR_SEL_PAD_CONTR(3) |
DDRMC_CR154_PAD_ZQ_HW_FOR(0), 154 },
{ DDRMC_CR155_PAD_ODT_BYTE1(5) | DDRMC_CR155_PAD_ODT_BYTE0(5), 155 },
{ DDRMC_CR158_TWR(6), 158 },
{ DDRMC_CR161_ODT_EN(0) | DDRMC_CR161_TODTH_RD(0) |
DDRMC_CR161_TODTH_WR(6), 161 },
/* end marker */
{ 0, -1 }
};
/* PHY settings -- most of them differ from default in imx-regs.h */
#define PCM052_DDRMC_PHY_DQ_TIMING 0x00002213
#define PCM052_DDRMC_PHY_CTRL 0x00290000
#define PCM052_DDRMC_PHY_SLAVE_CTRL 0x00002c00
#define PCM052_DDRMC_PHY_PROC_PAD_ODT 0x00010020
static struct ddrmc_phy_setting pcm052_phy_settings[] = {
{ PCM052_DDRMC_PHY_DQ_TIMING, 0 },
{ PCM052_DDRMC_PHY_DQ_TIMING, 16 },
{ PCM052_DDRMC_PHY_DQ_TIMING, 32 },
{ PCM052_DDRMC_PHY_DQ_TIMING, 48 },
{ DDRMC_PHY_DQS_TIMING, 1 },
{ DDRMC_PHY_DQS_TIMING, 17 },
{ DDRMC_PHY_DQS_TIMING, 33 },
{ DDRMC_PHY_DQS_TIMING, 49 },
{ PCM052_DDRMC_PHY_CTRL, 2 },
{ PCM052_DDRMC_PHY_CTRL, 18 },
{ PCM052_DDRMC_PHY_CTRL, 34 },
{ DDRMC_PHY_MASTER_CTRL, 3 },
{ DDRMC_PHY_MASTER_CTRL, 19 },
{ DDRMC_PHY_MASTER_CTRL, 35 },
{ PCM052_DDRMC_PHY_SLAVE_CTRL, 4 },
{ PCM052_DDRMC_PHY_SLAVE_CTRL, 20 },
{ PCM052_DDRMC_PHY_SLAVE_CTRL, 36 },
{ DDRMC_PHY50_DDR3_MODE | DDRMC_PHY50_EN_SW_HALF_CYCLE, 50 },
{ PCM052_DDRMC_PHY_PROC_PAD_ODT, 52 },
/* end marker */
{ 0, -1 }
};
int dram_init(void)
{
static const struct ddr3_jedec_timings pcm052_ddr_timings = {
.tinit = 5,
.trst_pwron = 80000,
.cke_inactive = 200000,
.wrlat = 5,
.caslat_lin = 12,
.trc = 6,
.trrd = 4,
.tccd = 4,
.tbst_int_interval = 4,
.tfaw = 18,
.trp = 6,
.twtr = 4,
.tras_min = 15,
.tmrd = 4,
.trtp = 4,
.tras_max = 14040,
.tmod = 12,
.tckesr = 4,
.tcke = 3,
.trcd_int = 6,
.tras_lockout = 1,
.tdal = 10,
.bstlen = 3,
.tdll = 512,
.trp_ab = 6,
.tref = 1542,
.trfc = 64,
.tref_int = 5,
.tpdex = 3,
.txpdll = 10,
.txsnr = 68,
.txsr = 506,
.cksrx = 5,
.cksre = 5,
.freq_chg_en = 1,
.zqcl = 256,
.zqinit = 512,
.zqcs = 64,
.ref_per_zq = 64,
.zqcs_rotate = 1,
.aprebit = 10,
.cmd_age_cnt = 255,
.age_cnt = 255,
.q_fullness = 0,
.odt_rd_mapcs0 = 1,
.odt_wr_mapcs0 = 1,
.wlmrd = 40,
.wldqsen = 25,
};
static const iomux_v3_cfg_t pcm052_pads[] = {
PCM052_VF610_PAD_DDR_A15__DDR_A_15,
PCM052_VF610_PAD_DDR_A14__DDR_A_14,
PCM052_VF610_PAD_DDR_A13__DDR_A_13,
PCM052_VF610_PAD_DDR_A12__DDR_A_12,
PCM052_VF610_PAD_DDR_A11__DDR_A_11,
PCM052_VF610_PAD_DDR_A10__DDR_A_10,
PCM052_VF610_PAD_DDR_A9__DDR_A_9,
PCM052_VF610_PAD_DDR_A8__DDR_A_8,
PCM052_VF610_PAD_DDR_A7__DDR_A_7,
PCM052_VF610_PAD_DDR_A6__DDR_A_6,
PCM052_VF610_PAD_DDR_A5__DDR_A_5,
PCM052_VF610_PAD_DDR_A4__DDR_A_4,
PCM052_VF610_PAD_DDR_A3__DDR_A_3,
PCM052_VF610_PAD_DDR_A2__DDR_A_2,
PCM052_VF610_PAD_DDR_A1__DDR_A_1,
PCM052_VF610_PAD_DDR_A0__DDR_A_0,
PCM052_VF610_PAD_DDR_BA2__DDR_BA_2,
PCM052_VF610_PAD_DDR_BA1__DDR_BA_1,
PCM052_VF610_PAD_DDR_BA0__DDR_BA_0,
PCM052_VF610_PAD_DDR_CAS__DDR_CAS_B,
PCM052_VF610_PAD_DDR_CKE__DDR_CKE_0,
PCM052_VF610_PAD_DDR_CLK__DDR_CLK_0,
PCM052_VF610_PAD_DDR_CS__DDR_CS_B_0,
PCM052_VF610_PAD_DDR_D15__DDR_D_15,
PCM052_VF610_PAD_DDR_D14__DDR_D_14,
PCM052_VF610_PAD_DDR_D13__DDR_D_13,
PCM052_VF610_PAD_DDR_D12__DDR_D_12,
PCM052_VF610_PAD_DDR_D11__DDR_D_11,
PCM052_VF610_PAD_DDR_D10__DDR_D_10,
PCM052_VF610_PAD_DDR_D9__DDR_D_9,
PCM052_VF610_PAD_DDR_D8__DDR_D_8,
PCM052_VF610_PAD_DDR_D7__DDR_D_7,
PCM052_VF610_PAD_DDR_D6__DDR_D_6,
PCM052_VF610_PAD_DDR_D5__DDR_D_5,
PCM052_VF610_PAD_DDR_D4__DDR_D_4,
PCM052_VF610_PAD_DDR_D3__DDR_D_3,
PCM052_VF610_PAD_DDR_D2__DDR_D_2,
PCM052_VF610_PAD_DDR_D1__DDR_D_1,
PCM052_VF610_PAD_DDR_D0__DDR_D_0,
PCM052_VF610_PAD_DDR_DQM1__DDR_DQM_1,
PCM052_VF610_PAD_DDR_DQM0__DDR_DQM_0,
PCM052_VF610_PAD_DDR_DQS1__DDR_DQS_1,
PCM052_VF610_PAD_DDR_DQS0__DDR_DQS_0,
PCM052_VF610_PAD_DDR_RAS__DDR_RAS_B,
PCM052_VF610_PAD_DDR_WE__DDR_WE_B,
PCM052_VF610_PAD_DDR_ODT1__DDR_ODT_0,
PCM052_VF610_PAD_DDR_ODT0__DDR_ODT_1,
PCM052_VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1,
PCM052_VF610_PAD_DDR_DDRBYTE0__DDR_DDRBYTE0,
PCM052_VF610_PAD_DDR_RESETB,
};
imx_iomux_v3_setup_multiple_pads(pcm052_pads, ARRAY_SIZE(pcm052_pads));
ddrmc_ctrl_init_ddr3(&pcm052_ddr_timings, pcm052_cr_settings,
pcm052_phy_settings, 1, 2);
gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
return 0;
}
static void setup_iomux_uart(void)
{
static const iomux_v3_cfg_t uart1_pads[] = {
NEW_PAD_CTRL(VF610_PAD_PTB4__UART1_TX, VF610_UART_PAD_CTRL),
NEW_PAD_CTRL(VF610_PAD_PTB5__UART1_RX, VF610_UART_PAD_CTRL),
};
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
}
#define ENET_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_HIGH | \
PAD_CTL_DSE_50ohm | PAD_CTL_OBE_IBE_ENABLE)
static void setup_iomux_enet(void)
{
static const iomux_v3_cfg_t enet0_pads[] = {
NEW_PAD_CTRL(VF610_PAD_PTA6__RMII0_CLKIN, ENET_PAD_CTRL),
NEW_PAD_CTRL(VF610_PAD_PTC1__RMII0_MDIO, ENET_PAD_CTRL),
NEW_PAD_CTRL(VF610_PAD_PTC0__RMII0_MDC, ENET_PAD_CTRL),
NEW_PAD_CTRL(VF610_PAD_PTC2__RMII0_CRS_DV, ENET_PAD_CTRL),
NEW_PAD_CTRL(VF610_PAD_PTC3__RMII0_RD1, ENET_PAD_CTRL),
NEW_PAD_CTRL(VF610_PAD_PTC4__RMII0_RD0, ENET_PAD_CTRL),
NEW_PAD_CTRL(VF610_PAD_PTC5__RMII0_RXER, ENET_PAD_CTRL),
NEW_PAD_CTRL(VF610_PAD_PTC6__RMII0_TD1, ENET_PAD_CTRL),
NEW_PAD_CTRL(VF610_PAD_PTC7__RMII0_TD0, ENET_PAD_CTRL),
NEW_PAD_CTRL(VF610_PAD_PTC8__RMII0_TXEN, ENET_PAD_CTRL),
};
imx_iomux_v3_setup_multiple_pads(enet0_pads, ARRAY_SIZE(enet0_pads));
}
/*
* I2C2 is the only I2C used, on pads PTA22/PTA23.
*/
static void setup_iomux_i2c(void)
{
static const iomux_v3_cfg_t i2c_pads[] = {
VF610_PAD_PTA22__I2C2_SCL,
VF610_PAD_PTA23__I2C2_SDA,
};
imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
}
#ifdef CONFIG_NAND_VF610_NFC
static void setup_iomux_nfc(void)
{
static const iomux_v3_cfg_t nfc_pads[] = {
VF610_PAD_PTD31__NF_IO15,
VF610_PAD_PTD30__NF_IO14,
VF610_PAD_PTD29__NF_IO13,
VF610_PAD_PTD28__NF_IO12,
VF610_PAD_PTD27__NF_IO11,
VF610_PAD_PTD26__NF_IO10,
VF610_PAD_PTD25__NF_IO9,
VF610_PAD_PTD24__NF_IO8,
VF610_PAD_PTD23__NF_IO7,
VF610_PAD_PTD22__NF_IO6,
VF610_PAD_PTD21__NF_IO5,
VF610_PAD_PTD20__NF_IO4,
VF610_PAD_PTD19__NF_IO3,
VF610_PAD_PTD18__NF_IO2,
VF610_PAD_PTD17__NF_IO1,
VF610_PAD_PTD16__NF_IO0,
VF610_PAD_PTB24__NF_WE_B,
VF610_PAD_PTB25__NF_CE0_B,
VF610_PAD_PTB27__NF_RE_B,
VF610_PAD_PTC26__NF_RB_B,
VF610_PAD_PTC27__NF_ALE,
VF610_PAD_PTC28__NF_CLE
};
imx_iomux_v3_setup_multiple_pads(nfc_pads, ARRAY_SIZE(nfc_pads));
}
#endif
static void setup_iomux_qspi(void)
{
static const iomux_v3_cfg_t qspi0_pads[] = {
VF610_PAD_PTD0__QSPI0_A_QSCK,
VF610_PAD_PTD1__QSPI0_A_CS0,
VF610_PAD_PTD2__QSPI0_A_DATA3,
VF610_PAD_PTD3__QSPI0_A_DATA2,
VF610_PAD_PTD4__QSPI0_A_DATA1,
VF610_PAD_PTD5__QSPI0_A_DATA0,
VF610_PAD_PTD7__QSPI0_B_QSCK,
VF610_PAD_PTD8__QSPI0_B_CS0,
VF610_PAD_PTD9__QSPI0_B_DATA3,
VF610_PAD_PTD10__QSPI0_B_DATA2,
VF610_PAD_PTD11__QSPI0_B_DATA1,
VF610_PAD_PTD12__QSPI0_B_DATA0,
};
imx_iomux_v3_setup_multiple_pads(qspi0_pads, ARRAY_SIZE(qspi0_pads));
}
#define ESDHC_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_HIGH | \
PAD_CTL_DSE_20ohm | PAD_CTL_OBE_IBE_ENABLE)
struct fsl_esdhc_cfg esdhc_cfg[1] = {
{ESDHC1_BASE_ADDR},
};
int board_mmc_getcd(struct mmc *mmc)
{
/* eSDHC1 is always present */
return 1;
}
int board_mmc_init(bd_t *bis)
{
static const iomux_v3_cfg_t esdhc1_pads[] = {
NEW_PAD_CTRL(VF610_PAD_PTA24__ESDHC1_CLK, ESDHC_PAD_CTRL),
NEW_PAD_CTRL(VF610_PAD_PTA25__ESDHC1_CMD, ESDHC_PAD_CTRL),
NEW_PAD_CTRL(VF610_PAD_PTA26__ESDHC1_DAT0, ESDHC_PAD_CTRL),
NEW_PAD_CTRL(VF610_PAD_PTA27__ESDHC1_DAT1, ESDHC_PAD_CTRL),
NEW_PAD_CTRL(VF610_PAD_PTA28__ESDHC1_DAT2, ESDHC_PAD_CTRL),
NEW_PAD_CTRL(VF610_PAD_PTA29__ESDHC1_DAT3, ESDHC_PAD_CTRL),
};
esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
imx_iomux_v3_setup_multiple_pads(
esdhc1_pads, ARRAY_SIZE(esdhc1_pads));
return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
}
static void clock_init(void)
{
struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
struct anadig_reg *anadig = (struct anadig_reg *)ANADIG_BASE_ADDR;
clrsetbits_le32(&ccm->ccgr0, CCM_REG_CTRL_MASK,
CCM_CCGR0_UART1_CTRL_MASK);
clrsetbits_le32(&ccm->ccgr1, CCM_REG_CTRL_MASK,
CCM_CCGR1_PIT_CTRL_MASK | CCM_CCGR1_WDOGA5_CTRL_MASK);
clrsetbits_le32(&ccm->ccgr2, CCM_REG_CTRL_MASK,
CCM_CCGR2_IOMUXC_CTRL_MASK | CCM_CCGR2_PORTA_CTRL_MASK |
CCM_CCGR2_PORTB_CTRL_MASK | CCM_CCGR2_PORTC_CTRL_MASK |
CCM_CCGR2_PORTD_CTRL_MASK | CCM_CCGR2_PORTE_CTRL_MASK |
CCM_CCGR2_QSPI0_CTRL_MASK);
clrsetbits_le32(&ccm->ccgr3, CCM_REG_CTRL_MASK,
CCM_CCGR3_ANADIG_CTRL_MASK | CCM_CCGR3_SCSC_CTRL_MASK);
clrsetbits_le32(&ccm->ccgr4, CCM_REG_CTRL_MASK,
CCM_CCGR4_WKUP_CTRL_MASK | CCM_CCGR4_CCM_CTRL_MASK |
CCM_CCGR4_GPC_CTRL_MASK);
clrsetbits_le32(&ccm->ccgr6, CCM_REG_CTRL_MASK,
CCM_CCGR6_OCOTP_CTRL_MASK | CCM_CCGR6_DDRMC_CTRL_MASK);
clrsetbits_le32(&ccm->ccgr7, CCM_REG_CTRL_MASK,
CCM_CCGR7_SDHC1_CTRL_MASK);
clrsetbits_le32(&ccm->ccgr9, CCM_REG_CTRL_MASK,
CCM_CCGR9_FEC0_CTRL_MASK | CCM_CCGR9_FEC1_CTRL_MASK);
clrsetbits_le32(&ccm->ccgr10, CCM_REG_CTRL_MASK,
CCM_CCGR10_NFC_CTRL_MASK | CCM_CCGR10_I2C2_CTRL_MASK);
clrsetbits_le32(&anadig->pll2_ctrl, ANADIG_PLL2_CTRL_POWERDOWN,
ANADIG_PLL2_CTRL_ENABLE | ANADIG_PLL2_CTRL_DIV_SELECT);
clrsetbits_le32(&anadig->pll1_ctrl, ANADIG_PLL1_CTRL_POWERDOWN,
ANADIG_PLL1_CTRL_ENABLE | ANADIG_PLL1_CTRL_DIV_SELECT);
clrsetbits_le32(&ccm->ccr, CCM_CCR_OSCNT_MASK,
CCM_CCR_FIRC_EN | CCM_CCR_OSCNT(5));
clrsetbits_le32(&ccm->ccsr, CCM_REG_CTRL_MASK,
CCM_CCSR_PLL1_PFD_CLK_SEL(3) | CCM_CCSR_PLL2_PFD4_EN |
CCM_CCSR_PLL2_PFD3_EN | CCM_CCSR_PLL2_PFD2_EN |
CCM_CCSR_PLL2_PFD1_EN | CCM_CCSR_PLL1_PFD4_EN |
CCM_CCSR_PLL1_PFD3_EN | CCM_CCSR_PLL1_PFD2_EN |
CCM_CCSR_PLL1_PFD1_EN | CCM_CCSR_DDRC_CLK_SEL(1) |
CCM_CCSR_FAST_CLK_SEL(1) | CCM_CCSR_SYS_CLK_SEL(4));
clrsetbits_le32(&ccm->cacrr, CCM_REG_CTRL_MASK,
CCM_CACRR_IPG_CLK_DIV(1) | CCM_CACRR_BUS_CLK_DIV(2) |
CCM_CACRR_ARM_CLK_DIV(0));
clrsetbits_le32(&ccm->cscmr1, CCM_REG_CTRL_MASK,
CCM_CSCMR1_ESDHC1_CLK_SEL(3) |
CCM_CSCMR1_QSPI0_CLK_SEL(3) |
CCM_CSCMR1_NFC_CLK_SEL(0));
clrsetbits_le32(&ccm->cscdr1, CCM_REG_CTRL_MASK,
CCM_CSCDR1_RMII_CLK_EN);
clrsetbits_le32(&ccm->cscdr2, CCM_REG_CTRL_MASK,
CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0) |
CCM_CSCDR2_NFC_EN);
clrsetbits_le32(&ccm->cscdr3, CCM_REG_CTRL_MASK,
CCM_CSCDR3_QSPI0_EN | CCM_CSCDR3_QSPI0_DIV(1) |
CCM_CSCDR3_QSPI0_X2_DIV(1) |
CCM_CSCDR3_QSPI0_X4_DIV(3) |
CCM_CSCDR3_NFC_PRE_DIV(5));
clrsetbits_le32(&ccm->cscmr2, CCM_REG_CTRL_MASK,
CCM_CSCMR2_RMII_CLK_SEL(0));
}
static void mscm_init(void)
{
struct mscm_ir *mscmir = (struct mscm_ir *)MSCM_IR_BASE_ADDR;
int i;
for (i = 0; i < MSCM_IRSPRC_NUM; i++)
writew(MSCM_IRSPRC_CP0_EN, &mscmir->irsprc[i]);
}
int board_phy_config(struct phy_device *phydev)
{
if (phydev->drv->config)
phydev->drv->config(phydev);
return 0;
}
int board_early_init_f(void)
{
clock_init();
mscm_init();
setup_iomux_uart();
setup_iomux_enet();
setup_iomux_i2c();
setup_iomux_qspi();
setup_iomux_nfc();
return 0;
}
int board_init(void)
{
struct scsc_reg *scsc = (struct scsc_reg *)SCSC_BASE_ADDR;
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
/*
* Enable external 32K Oscillator
*
* The internal clock experiences significant drift
* so we must use the external oscillator in order
* to maintain correct time in the hwclock
*/
setbits_le32(&scsc->sosc_ctr, SCSC_SOSC_CTR_SOSC_EN);
return 0;
}
int checkboard(void)
{
puts("Board: PCM-052\n");
return 0;
}

View file

@ -35,6 +35,61 @@ DECLARE_GLOBAL_DATA_PTR;
#define USB_PEN_GPIO 83
static struct ddrmc_cr_setting colibri_vf_cr_settings[] = {
/* levelling */
{ DDRMC_CR97_WRLVL_EN, 97 },
{ DDRMC_CR98_WRLVL_DL_0(0), 98 },
{ DDRMC_CR99_WRLVL_DL_1(0), 99 },
{ DDRMC_CR102_RDLVL_REG_EN | DDRMC_CR102_RDLVL_GT_REGEN, 102 },
{ DDRMC_CR105_RDLVL_DL_0(0), 105 },
{ DDRMC_CR106_RDLVL_GTDL_0(4), 106 },
{ DDRMC_CR110_RDLVL_DL_1(0) | DDRMC_CR110_RDLVL_GTDL_1(4), 110 },
/* AXI */
{ DDRMC_CR117_AXI0_W_PRI(0) | DDRMC_CR117_AXI0_R_PRI(0), 117 },
{ DDRMC_CR118_AXI1_W_PRI(1) | DDRMC_CR118_AXI1_R_PRI(1), 118 },
{ DDRMC_CR120_AXI0_PRI1_RPRI(2) |
DDRMC_CR120_AXI0_PRI0_RPRI(2), 120 },
{ DDRMC_CR121_AXI0_PRI3_RPRI(2) |
DDRMC_CR121_AXI0_PRI2_RPRI(2), 121 },
{ DDRMC_CR122_AXI1_PRI1_RPRI(1) | DDRMC_CR122_AXI1_PRI0_RPRI(1) |
DDRMC_CR122_AXI0_PRIRLX(100), 122 },
{ DDRMC_CR123_AXI1_P_ODR_EN | DDRMC_CR123_AXI1_PRI3_RPRI(1) |
DDRMC_CR123_AXI1_PRI2_RPRI(1), 123 },
{ DDRMC_CR124_AXI1_PRIRLX(100), 124 },
{ DDRMC_CR126_PHY_RDLAT(8), 126 },
{ DDRMC_CR132_WRLAT_ADJ(5) |
DDRMC_CR132_RDLAT_ADJ(6), 132 },
{ DDRMC_CR137_PHYCTL_DL(2), 137 },
{ DDRMC_CR138_PHY_WRLV_MXDL(256) |
DDRMC_CR138_PHYDRAM_CK_EN(1), 138 },
{ DDRMC_CR139_PHY_WRLV_RESPLAT(4) | DDRMC_CR139_PHY_WRLV_LOAD(7) |
DDRMC_CR139_PHY_WRLV_DLL(3) |
DDRMC_CR139_PHY_WRLV_EN(3), 139 },
{ DDRMC_CR140_PHY_WRLV_WW(64), 140 },
{ DDRMC_CR143_RDLV_GAT_MXDL(1536) |
DDRMC_CR143_RDLV_MXDL(128), 143 },
{ DDRMC_CR144_PHY_RDLVL_RES(4) | DDRMC_CR144_PHY_RDLV_LOAD(7) |
DDRMC_CR144_PHY_RDLV_DLL(3) |
DDRMC_CR144_PHY_RDLV_EN(3), 144 },
{ DDRMC_CR145_PHY_RDLV_RR(64), 145 },
{ DDRMC_CR146_PHY_RDLVL_RESP(64), 146 },
{ DDRMC_CR147_RDLV_RESP_MASK(983040), 147 },
{ DDRMC_CR148_RDLV_GATE_RESP_MASK(983040), 148 },
{ DDRMC_CR151_RDLV_GAT_DQ_ZERO_CNT(1) |
DDRMC_CR151_RDLVL_DQ_ZERO_CNT(1), 151 },
{ DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(13) |
DDRMC_CR154_PAD_ZQ_MODE(1) |
DDRMC_CR154_DDR_SEL_PAD_CONTR(3) |
DDRMC_CR154_PAD_ZQ_HW_FOR(1), 154 },
{ DDRMC_CR155_PAD_ODT_BYTE1(1) | DDRMC_CR155_PAD_ODT_BYTE0(1), 155 },
{ DDRMC_CR158_TWR(6), 158 },
{ DDRMC_CR161_ODT_EN(1) | DDRMC_CR161_TODTH_RD(2) |
DDRMC_CR161_TODTH_WR(2), 161 },
/* end marker */
{ 0, -1 }
};
static const iomux_v3_cfg_t usb_pads[] = {
VF610_PAD_PTD4__GPIO_83,
};
@ -42,48 +97,59 @@ static const iomux_v3_cfg_t usb_pads[] = {
int dram_init(void)
{
static const struct ddr3_jedec_timings timings = {
.tinit = 5,
.trst_pwron = 80000,
.cke_inactive = 200000,
.wrlat = 5,
.caslat_lin = 12,
.trc = 21,
.trrd = 4,
.tccd = 4,
.tfaw = 20,
.trp = 6,
.twtr = 4,
.tras_min = 15,
.tmrd = 4,
.trtp = 4,
.tras_max = 28080,
.tmod = 12,
.tckesr = 4,
.tcke = 3,
.trcd_int = 6,
.tdal = 12,
.tdll = 512,
.trp_ab = 6,
.tref = 3120,
.trfc = 64,
.tpdex = 3,
.txpdll = 10,
.txsnr = 48,
.txsr = 468,
.cksrx = 5,
.cksre = 5,
.zqcl = 256,
.zqinit = 512,
.zqcs = 64,
.ref_per_zq = 64,
.aprebit = 10,
.wlmrd = 40,
.wldqsen = 25,
.tinit = 5,
.trst_pwron = 80000,
.cke_inactive = 200000,
.wrlat = 5,
.caslat_lin = 12,
.trc = 21,
.trrd = 4,
.tccd = 4,
.tbst_int_interval = 0,
.tfaw = 20,
.trp = 6,
.twtr = 4,
.tras_min = 15,
.tmrd = 4,
.trtp = 4,
.tras_max = 28080,
.tmod = 12,
.tckesr = 4,
.tcke = 3,
.trcd_int = 6,
.tras_lockout = 0,
.tdal = 12,
.bstlen = 0,
.tdll = 512,
.trp_ab = 6,
.tref = 3120,
.trfc = 64,
.tref_int = 0,
.tpdex = 3,
.txpdll = 10,
.txsnr = 48,
.txsr = 468,
.cksrx = 5,
.cksre = 5,
.freq_chg_en = 0,
.zqcl = 256,
.zqinit = 512,
.zqcs = 64,
.ref_per_zq = 64,
.zqcs_rotate = 0,
.aprebit = 10,
.cmd_age_cnt = 64,
.age_cnt = 64,
.q_fullness = 7,
.odt_rd_mapcs0 = 0,
.odt_wr_mapcs0 = 1,
.wlmrd = 40,
.wldqsen = 25,
};
ddrmc_setup_iomux();
ddrmc_setup_iomux(NULL, 0);
ddrmc_ctrl_init_ddr3(&timings, NULL, 1, 2);
ddrmc_ctrl_init_ddr3(&timings, colibri_vf_cr_settings, NULL, 1, 2);
gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
return 0;

6
configs/pcm052_defconfig Normal file
View file

@ -0,0 +1,6 @@
CONFIG_ARM=y
CONFIG_TARGET_PCM052=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/pcm052/imximage.cfg,ENV_IS_IN_NAND"
CONFIG_NAND_VF610_NFC=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_SYS_NAND_VF610_NFC_45_ECC_BYTES=y

View file

@ -612,16 +612,22 @@ static u32 mxc_i2c_set_bus_speed(struct i2c_adapter *adap, uint speed)
/*
* Register mxc i2c adapters
*/
#ifdef CONFIG_SYS_I2C_MXC_I2C1
U_BOOT_I2C_ADAP_COMPLETE(mxc0, mxc_i2c_init, mxc_i2c_probe,
mxc_i2c_read, mxc_i2c_write,
mxc_i2c_set_bus_speed,
CONFIG_SYS_MXC_I2C1_SPEED,
CONFIG_SYS_MXC_I2C1_SLAVE, 0)
#endif
#ifdef CONFIG_SYS_I2C_MXC_I2C2
U_BOOT_I2C_ADAP_COMPLETE(mxc1, mxc_i2c_init, mxc_i2c_probe,
mxc_i2c_read, mxc_i2c_write,
mxc_i2c_set_bus_speed,
CONFIG_SYS_MXC_I2C2_SPEED,
CONFIG_SYS_MXC_I2C2_SLAVE, 1)
#endif
#ifdef CONFIG_SYS_I2C_MXC_I2C3
U_BOOT_I2C_ADAP_COMPLETE(mxc2, mxc_i2c_init, mxc_i2c_probe,
mxc_i2c_read, mxc_i2c_write,

View file

@ -317,6 +317,8 @@
#ifdef CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_MXC_I2C1_SPEED 100000 /* 100 kHz */
#define CONFIG_SYS_MXC_I2C1_SLAVE 0x7F
#define CONFIG_SYS_MXC_I2C2_SPEED 100000 /* 100 kHz */

View file

@ -189,6 +189,8 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_SYS_I2C_SLAVE 0x7f

View file

@ -39,6 +39,8 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_SPEED 100000

View file

@ -198,6 +198,8 @@
/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_SYS_MXC_I2C3_SPEED 400000

View file

@ -33,6 +33,8 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000

View file

@ -52,6 +52,8 @@
*/
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_SPD_BUS_NUM 2 /* I2C3 */
#define CONFIG_SYS_MXC_I2C3_SLAVE 0xfe

View file

@ -107,6 +107,8 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_I2C_GSC 0

View file

@ -38,6 +38,8 @@
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_CLK_OFFSET I2C2_CLK_OFFSET

View file

@ -389,6 +389,8 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
/*

View file

@ -275,6 +275,8 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
/* EEPROM */

View file

@ -97,6 +97,8 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_MXC_I2C4 /* enable I2C bus 4 */

View file

@ -172,6 +172,8 @@
#ifdef CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_RTC_BUS_NUM 1 /* I2C2 */
#endif

View file

@ -115,6 +115,8 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
/* RTC */
#define CONFIG_RTC_IMXDI

View file

@ -42,6 +42,8 @@
*/
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_MXC_SPI
#define CONFIG_MXC_GPIO

View file

@ -48,6 +48,8 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
/* MMC Configs */

View file

@ -41,6 +41,8 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
/* PMIC Configs */

View file

@ -76,6 +76,8 @@
/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
/* PMIC Controller */

View file

@ -38,6 +38,8 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
/* MMC Configs */

View file

@ -51,6 +51,8 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000

View file

@ -80,6 +80,10 @@
"boot_fdt=try\0" \
"ip_dyn=yes\0" \
"console=" CONFIG_CONSOLE_DEV "\0" \
"dfuspi=dfu 0 sf 0:0:10000000:0\0" \
"dfu_alt_info_spl=spl raw 0x400\0" \
"dfu_alt_info_img=u-boot raw 0x10000\0" \
"dfu_alt_info=spl raw 0x400\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
@ -244,6 +248,12 @@
#define CONFIG_ANDROID_BOOT_IMAGE
#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000
/* USB Device Firmware Update support */
#define CONFIG_CMD_DFU
#define CONFIG_USB_FUNCTION_DFU
#define CONFIG_DFU_MMC
#define CONFIG_DFU_SF
#endif
#endif /* __MX6QSABRE_COMMON_CONFIG_H */

View file

@ -44,6 +44,8 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000

View file

@ -35,6 +35,8 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000

View file

@ -127,6 +127,8 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000

View file

@ -54,6 +54,8 @@
#ifdef CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_SPEED 100000
/* PMIC only for 9X9 EVK */

View file

@ -47,7 +47,7 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */

View file

@ -43,6 +43,8 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_I2C_EDID

View file

@ -102,6 +102,8 @@
/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_I2C_MXC

View file

@ -44,6 +44,8 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000

231
include/configs/pcm052.h Normal file
View file

@ -0,0 +1,231 @@
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* Configuration settings for the phytec PCM-052 SoM.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/arch/imx-regs.h>
#define CONFIG_VF610
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SYS_THUMB_BUILD
#define CONFIG_SKIP_LOWLEVEL_INIT
/* Enable passing of ATAGs */
#define CONFIG_CMDLINE_TAG
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_FSL_LPUART
#define LPUART_BASE UART1_BASE
/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SYS_UART_PORT (1)
#define CONFIG_BAUDRATE 115200
#undef CONFIG_CMD_IMLS
/* NAND support */
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
#define CONFIG_SYS_NAND_ONFI_DETECTION
#ifdef CONFIG_CMD_NAND
#define CONFIG_USE_ARCH_MEMCPY
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
#define CONFIG_JFFS2_NAND
/* UBI */
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS
#define CONFIG_RBTREE
#define CONFIG_LZO
/* Dynamic MTD partition support */
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE
#define MTDIDS_DEFAULT "nand0=NAND,nor0=qspi0-a,nor1=qspi0-b"
#define MTDPARTS_DEFAULT "mtdparts=NAND:256k(spare)"\
",384k(bootloader)"\
",128k(env1)"\
",128k(env2)"\
",3840k(kernel)"\
",-(rootfs)"\
",qspi0-a:-(jffs2),qspio0-b:-(jffs2)"
#endif
#define CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_ESDHC_NUM 1
/*#define CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ1*/
#define CONFIG_SYS_FSL_ERRATUM_ESDHC135
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE RMII
#define CONFIG_FEC_MXC_PHYADDR 0
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
/* QSPI Configs*/
#define CONFIG_FSL_QSPI
#ifdef CONFIG_FSL_QSPI
#define CONFIG_CMD_SF
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_STMICRO
#define FSL_QSPI_FLASH_SIZE (1 << 24)
#define FSL_QSPI_FLASH_NUM 2
#define CONFIG_SYS_FSL_QSPI_LE
#endif
/* I2C Configs */
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC_I2C3
#define CONFIG_SYS_I2C_MXC
/* RTC (actually an RV-4162 but M41T62-compatible) */
#define CONFIG_CMD_DATE
#define CONFIG_RTC_M41T62
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
#define CONFIG_SYS_RTC_BUS_NUM 2
/* EEPROM (24FC256) */
#define CONFIG_CMD_EEPROM
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_I2C_EEPROM_BUS 2
#define CONFIG_BOOTDELAY 3
#define CONFIG_LOADADDR 0x82000000
/* We boot from the gfxRAM area of the OCRAM. */
#define CONFIG_SYS_TEXT_BASE 0x3f408000
#define CONFIG_BOARD_SIZE_LIMIT 524288
#define CONFIG_BOOTCOMMAND "run bootcmd_sd"
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootfile=uImage\0" \
"bootargs_base=setenv bootargs rw mem=256M " \
"console=ttymxc1,115200n8\0" \
"bootargs_sd=setenv bootargs ${bootargs} " \
"root=/dev/mmcblk0p2 rootwait\0" \
"bootargs_net=setenv bootargs ${bootargs} root=/dev/nfs ip=dhcp " \
"nfsroot=${serverip}:${nfs_root},v3,tcp\0" \
"bootargs_nand=setenv bootargs ${bootargs} " \
"root=/dev/mtdblock2 rootfstype=jffs2\0" \
"bootargs_mtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
"bootcmd_sd=run bootargs_base bootargs_sd bootargs_mtd; mmc rescan; " \
"fatload mmc 0:1 ${loadaddr} ${bootfile}; bootm ${loadaddr}\0" \
"bootcmd_net=run bootargs_base bootargs_net bootargs_mtd; " \
"tftpboot ${loadaddr} ${tftploc}${bootfile}; bootm\0" \
"bootcmd_nand='run bootargs_base bootargs_nand bootargs_mtd; " \
"nand read ${loadaddr} 0x000E0000 0x3C0000; " \
"bootm ${loadaddr}\0" \
"tftploc=/path/to/tftp/directory/\0" \
"nfs_root=/path/to/nfs/root\0" \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
"update_kernel_from_sd=mw.b $(loadaddr) 0xff 0x3C0000; " \
"mmc rescan; fatload mmc 0:2 ${loadaddr} ${bootfile}; " \
"nand erase 0xE0000 0x3C0000; " \
"nand write.i ${loadaddr} 0xE0000 0x3C0000\0" \
"update_rootfs_from_tftp=mw.b ${loadaddr} 0xff 0x8F20000; " \
"tftp ${loadaddr} ${tftp}${filesys}; " \
"nand erase 0x4A0000 0x8F20000; " \
"nand write.i ${loadaddr} 0x4A0000 0x8F20000\0" \
"filesys=rootfs.jffs2\0"
/* miscellaneous commands */
#define CONFIG_CMD_ELF
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE \
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x80010000
#define CONFIG_SYS_MEMTEST_END 0x87C00000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
/*
* Stack sizes
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
/* Physical memory map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM (0x80000000)
#define PHYS_SDRAM_SIZE (256 * 1024 * 1024)
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH
#ifdef CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_SIZE (8 * 1024)
#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV 0
#endif
#ifdef CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SECT_SIZE (128 * 1024)
#define CONFIG_ENV_SIZE (8 * 1024)
#define CONFIG_ENV_OFFSET 0x80000
#define CONFIG_ENV_SIZE_REDUND (8 * 1024)
#define CONFIG_ENV_OFFSET_REDUND 0xA0000
#endif
#define CONFIG_OF_LIBFDT
#define CONFIG_CMD_BOOTZ
#endif

View file

@ -45,6 +45,8 @@
/* I2C config */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000

View file

@ -167,6 +167,8 @@
#ifdef CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_I2C_EDID
@ -190,7 +192,7 @@
"bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
"rdinit=/sbin/init enable_wait_mode=off\0" \
"bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
"mmc read 0x10800000 0x800 0x4000; bootm\0" \
"mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \
"bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
"bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
"run bootargs_upd; " \

View file

@ -33,6 +33,8 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000

View file

@ -62,6 +62,8 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_I2C_SPEED 100000

View file

@ -67,6 +67,8 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
/* Fuse */
#define CONFIG_CMD_FUSE

View file

@ -110,6 +110,8 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_SPD_BUS_NUM 0
#define CONFIG_BOOTDELAY 3

View file

@ -37,6 +37,8 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000

View file

@ -98,6 +98,8 @@
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_SPEED 100000
/* PMIC */

View file

@ -47,6 +47,8 @@
*/
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_SPD_BUS_NUM 0
#define CONFIG_MXC_SPI