redonkable
/
remarkable-uboot
1
0
Fork 0
Code Releases Activity

armv8: fsl-layerscape: Make DDR non secure in MMU tables 

DDR has been set as secure in MMU tables. Non-secure master such
as SDHC DMA cannot access data correctly. Mixing secure and non-
secure MMU entries requirs the MMU tables themselves in secure
memory. This patch moves MMU tables into a secure DDR area.

Early MMU tables are changed to set DDR as non-secure. A new
table is added into final MMU tables so secure memory can have
2MB granuality.

gd->secure_ram tracks the location of this secure memory. For
ARMv8 SoCs, the RAM base is not zero and RAM is divided into several
banks. gd->secure_ram needs to be maintained before using. This
maintenance is board-specific, depending on the SoC and memory
bank of the secure memory falls into.

Signed-off-by: York Sun <yorksun@freescale.com>
utp
York Sun 2015-12-04 11:57:08 -08:00
parent e81495224f
commit c107c0c05c
8 changed files with 191 additions and 19 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

121
arch/arm/cpu/armv8/fsl-layerscape/cpu.c
View File

@ -206,11 +206,65 @@ static inline void early_mmu_setup(void)
set_sctlr(get_sctlr() | CR_M);
}
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
/*
* Called from final mmu setup. The phys_addr is new, non-existing
* address. A new sub table is created @level2_table_secure to cover
* size of CONFIG_SYS_MEM_RESERVE_SECURE memory.
*/
static inline int final_secure_ddr(u64 *level0_table,
u64 *level2_table_secure,
phys_addr_t phys_addr)
{
int ret = -EINVAL;
struct table_info table = {};
struct sys_mmu_table ddr_entry = {
0, 0, BLOCK_SIZE_L1, MT_NORMAL,
PMD_SECT_OUTER_SHARE | PMD_SECT_NS
};
u64 index;
/* Need to create a new table */
ddr_entry.virt_addr = phys_addr & ~(BLOCK_SIZE_L1 - 1);
ddr_entry.phys_addr = phys_addr & ~(BLOCK_SIZE_L1 - 1);
ret = find_table(&ddr_entry, &table, level0_table);
if (ret)
return ret;
index = (ddr_entry.virt_addr - table.table_base) >> SECTION_SHIFT_L1;
set_pgtable_table(table.ptr, index, level2_table_secure);
table.ptr = level2_table_secure;
table.table_base = ddr_entry.virt_addr;
table.entry_size = BLOCK_SIZE_L2;
ret = set_block_entry(&ddr_entry, &table);
if (ret) {
printf("MMU error: could not fill non-secure ddr block entries\n");
return ret;
}
ddr_entry.virt_addr = phys_addr;
ddr_entry.phys_addr = phys_addr;
ddr_entry.size = CONFIG_SYS_MEM_RESERVE_SECURE;
ddr_entry.attribute = PMD_SECT_OUTER_SHARE;
ret = find_table(&ddr_entry, &table, level0_table);
if (ret) {
printf("MMU error: could not find secure ddr table\n");
return ret;
}
ret = set_block_entry(&ddr_entry, &table);
if (ret)
printf("MMU error: could not set secure ddr block entry\n");
return ret;
}
#endif
/*
* The final tables look similar to early tables, but different in detail.
* These tables are in DRAM. Sub tables are added to enable cache for
* QBMan and OCRAM.
*
* Put the MMU table in secure memory if gd->secure_ram is valid.
* OCRAM will be not used for this purpose so gd->secure_ram can't be 0.
*
* Level 1 table 0 contains 512 entries for each 1GB from 0 to 512GB.
* Level 1 table 1 contains 512 entries for each 1GB from 512GB to 1TB.
* Level 2 table 0 contains 512 entries for each 2MB from 0 to 1GB.
@ -223,18 +277,40 @@ static inline void early_mmu_setup(void)
*/
static inline void final_mmu_setup(void)
{
unsigned int el, i;
unsigned int el = current_el();
unsigned int i;
u64 *level0_table = (u64 *)gd->arch.tlb_addr;
u64 *level1_table0 = (u64 *)(gd->arch.tlb_addr + 0x1000);
u64 *level1_table1 = (u64 *)(gd->arch.tlb_addr + 0x2000);
u64 *level2_table0 = (u64 *)(gd->arch.tlb_addr + 0x3000);
#ifdef CONFIG_FSL_LSCH3
u64 *level2_table1 = (u64 *)(gd->arch.tlb_addr + 0x4000);
#elif defined(CONFIG_FSL_LSCH2)
u64 *level2_table1 = (u64 *)(gd->arch.tlb_addr + 0x4000);
u64 *level2_table2 = (u64 *)(gd->arch.tlb_addr + 0x5000);
u64 *level1_table0;
u64 *level1_table1;
u64 *level2_table0;
u64 *level2_table1;
#ifdef CONFIG_FSL_LSCH2
u64 *level2_table2;
#endif
struct table_info table = {level0_table, 0, BLOCK_SIZE_L0};
struct table_info table = {NULL, 0, BLOCK_SIZE_L0};
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
u64 *level2_table_secure;
if (el == 3) {
/*
* Only use gd->secure_ram if the address is recalculated
* Align to 4KB for MMU table
*/
if (gd->secure_ram & MEM_RESERVE_SECURE_MAINTAINED)
level0_table = (u64 *)(gd->secure_ram & ~0xfff);
else
printf("MMU warning: gd->secure_ram is not maintained, disabled.\n");
}
#endif
level1_table0 = level0_table + 512;
level1_table1 = level1_table0 + 512;
level2_table0 = level1_table1 + 512;
level2_table1 = level2_table0 + 512;
#ifdef CONFIG_FSL_LSCH2
level2_table2 = level2_table1 + 512;
#endif
table.ptr = level0_table;
/* Invalidate all table entries */
memset(level0_table, 0, PGTABLE_SIZE);
@ -269,17 +345,34 @@ static inline void final_mmu_setup(void)
&final_mmu_table[i]);
}
}
/* Set the secure memory to secure in MMU */
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
if (el == 3 && gd->secure_ram & MEM_RESERVE_SECURE_MAINTAINED) {
#ifdef CONFIG_FSL_LSCH3
level2_table_secure = level2_table1 + 512;
#elif defined(CONFIG_FSL_LSCH2)
level2_table_secure = level2_table2 + 512;
#endif
if (!final_secure_ddr(level0_table,
level2_table_secure,
gd->secure_ram & ~0x3)) {
gd->secure_ram |= MEM_RESERVE_SECURE_SECURED;
debug("Now MMU table is in secured memory at 0x%llx\n",
gd->secure_ram & ~0x3);
} else {
printf("MMU warning: Failed to secure DDR\n");
}
}
#endif
/* flush new MMU table */
flush_dcache_range(gd->arch.tlb_addr,
gd->arch.tlb_addr + gd->arch.tlb_size);
flush_dcache_range((ulong)level0_table,
(ulong)level0_table + gd->arch.tlb_size);
#ifdef CONFIG_SYS_DPAA_FMAN
flush_dcache_all();
#endif
/* point TTBR to the new table */
el = current_el();
set_ttbr_tcr_mair(el, (u64)level0_table, LAYERSCAPE_TCR_FINAL,
MEMORY_ATTRIBUTES);
/*

6
arch/arm/include/asm/arch-fsl-layerscape/config.h
View File

@ -17,6 +17,12 @@
#define CONFIG_SYS_FSL_DDR /* Freescale DDR driver */
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0
/*
* Reserve secure memory
* To be aligned with MMU block size
*/
#define CONFIG_SYS_MEM_RESERVE_SECURE (2048 * 1024) /* 2MB */
#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
#define CONFIG_MAX_CPUS 16
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8

14
arch/arm/include/asm/arch-fsl-layerscape/cpu.h
View File

@ -129,7 +129,8 @@ static const struct sys_mmu_table early_mmu_table[] = {
{ CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FSL_IFC_BASE1,
CONFIG_SYS_FSL_IFC_SIZE1, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
{ CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1,
CONFIG_SYS_FSL_DRAM_SIZE1, MT_NORMAL, PMD_SECT_OUTER_SHARE },
CONFIG_SYS_FSL_DRAM_SIZE1, MT_NORMAL,
PMD_SECT_OUTER_SHARE | PMD_SECT_NS },
/* Map IFC region #2 up to CONFIG_SYS_FLASH_BASE for NAND boot */
{ CONFIG_SYS_FSL_IFC_BASE2, CONFIG_SYS_FSL_IFC_BASE2,
CONFIG_SYS_FLASH_BASE - CONFIG_SYS_FSL_IFC_BASE2,
@ -138,7 +139,8 @@ static const struct sys_mmu_table early_mmu_table[] = {
CONFIG_SYS_FSL_DCSR_SIZE, MT_DEVICE_NGNRNE,
PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
{ CONFIG_SYS_FSL_DRAM_BASE2, CONFIG_SYS_FSL_DRAM_BASE2,
CONFIG_SYS_FSL_DRAM_SIZE2, MT_NORMAL, PMD_SECT_OUTER_SHARE },
CONFIG_SYS_FSL_DRAM_SIZE2, MT_NORMAL,
PMD_SECT_OUTER_SHARE | PMD_SECT_NS },
#elif defined(CONFIG_FSL_LSCH2)
{ CONFIG_SYS_FSL_CCSR_BASE, CONFIG_SYS_FSL_CCSR_BASE,
CONFIG_SYS_FSL_CCSR_SIZE, MT_DEVICE_NGNRNE,
@ -165,7 +167,8 @@ static const struct sys_mmu_table final_mmu_table[] = {
{ CONFIG_SYS_FSL_OCRAM_BASE, CONFIG_SYS_FSL_OCRAM_BASE,
CONFIG_SYS_FSL_OCRAM_SIZE, MT_NORMAL, PMD_SECT_NON_SHARE },
{ CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1,
CONFIG_SYS_FSL_DRAM_SIZE1, MT_NORMAL, PMD_SECT_OUTER_SHARE },
CONFIG_SYS_FSL_DRAM_SIZE1, MT_NORMAL,
PMD_SECT_OUTER_SHARE | PMD_SECT_NS },
{ CONFIG_SYS_FSL_QSPI_BASE2, CONFIG_SYS_FSL_QSPI_BASE2,
CONFIG_SYS_FSL_QSPI_SIZE2, MT_DEVICE_NGNRNE,
PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
@ -183,7 +186,7 @@ static const struct sys_mmu_table final_mmu_table[] = {
/* For QBMAN portal, only the first 64MB is cache-enabled */
{ CONFIG_SYS_FSL_QBMAN_BASE, CONFIG_SYS_FSL_QBMAN_BASE,
CONFIG_SYS_FSL_QBMAN_SIZE_1, MT_NORMAL,
PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN | PMD_SECT_NS },
{ CONFIG_SYS_FSL_QBMAN_BASE + CONFIG_SYS_FSL_QBMAN_SIZE_1,
CONFIG_SYS_FSL_QBMAN_BASE + CONFIG_SYS_FSL_QBMAN_SIZE_1,
CONFIG_SYS_FSL_QBMAN_SIZE - CONFIG_SYS_FSL_QBMAN_SIZE_1,
@ -212,7 +215,8 @@ static const struct sys_mmu_table final_mmu_table[] = {
CONFIG_SYS_FSL_PEBUF_SIZE, MT_DEVICE_NGNRNE,
PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
{ CONFIG_SYS_FSL_DRAM_BASE2, CONFIG_SYS_FSL_DRAM_BASE2,
CONFIG_SYS_FSL_DRAM_SIZE2, MT_NORMAL, PMD_SECT_OUTER_SHARE },
CONFIG_SYS_FSL_DRAM_SIZE2, MT_NORMAL,
PMD_SECT_OUTER_SHARE | PMD_SECT_NS },
#elif defined(CONFIG_FSL_LSCH2)
{ CONFIG_SYS_FSL_BOOTROM_BASE, CONFIG_SYS_FSL_BOOTROM_BASE,
CONFIG_SYS_FSL_BOOTROM_SIZE, MT_DEVICE_NGNRNE,

9
board/freescale/ls1043aqds/ddr.c
View File

@ -126,6 +126,15 @@ phys_size_t initdram(int board_type)
void dram_init_banksize(void)
{
/*
* gd->secure_ram tracks the location of secure memory.
* It was set as if the memory starts from 0.
* The address needs to add the offset of its bank.
*/
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_dram[0].size = gd->ram_size;
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram;
gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
#endif
}

15
board/freescale/ls1043ardb/ddr.c
View File

@ -186,13 +186,28 @@ phys_size_t initdram(int board_type)
void dram_init_banksize(void)
{
/*
* gd->secure_ram tracks the location of secure memory.
* It was set as if the memory starts from 0.
* The address needs to add the offset of its bank.
*/
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) {
gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE;
gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
gd->bd->bi_dram[1].size = gd->ram_size -
CONFIG_SYS_DDR_BLOCK1_SIZE;
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
gd->secure_ram = gd->bd->bi_dram[1].start +
gd->secure_ram -
CONFIG_SYS_DDR_BLOCK1_SIZE;
gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
#endif
} else {
gd->bd->bi_dram[0].size = gd->ram_size;
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram;
gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
#endif
}
}

15
board/freescale/ls2080a/ddr.c
View File

@ -175,14 +175,29 @@ void dram_init_banksize(void)
phys_size_t dp_ddr_size;
#endif
/*
* gd->secure_ram tracks the location of secure memory.
* It was set as if the memory starts from 0.
* The address needs to add the offset of its bank.
*/
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
if (gd->ram_size > CONFIG_SYS_LS2_DDR_BLOCK1_SIZE) {
gd->bd->bi_dram[0].size = CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
gd->bd->bi_dram[1].size = gd->ram_size -
CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
gd->secure_ram = gd->bd->bi_dram[1].start +
gd->secure_ram -
CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
#endif
} else {
gd->bd->bi_dram[0].size = gd->ram_size;
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram;
gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
#endif
}
#ifdef CONFIG_SYS_DP_DDR_BASE_PHY

15
board/freescale/ls2080aqds/ddr.c
View File

@ -175,14 +175,29 @@ void dram_init_banksize(void)
phys_size_t dp_ddr_size;
#endif
/*
* gd->secure_ram tracks the location of secure memory.
* It was set as if the memory starts from 0.
* The address needs to add the offset of its bank.
*/
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
if (gd->ram_size > CONFIG_SYS_LS2_DDR_BLOCK1_SIZE) {
gd->bd->bi_dram[0].size = CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
gd->bd->bi_dram[1].size = gd->ram_size -
CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
gd->secure_ram = gd->bd->bi_dram[1].start +
gd->secure_ram -
CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
#endif
} else {
gd->bd->bi_dram[0].size = gd->ram_size;
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram;
gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
#endif
}
#ifdef CONFIG_SYS_DP_DDR_BASE_PHY

15
board/freescale/ls2080ardb/ddr.c
View File

@ -175,14 +175,29 @@ void dram_init_banksize(void)
phys_size_t dp_ddr_size;
#endif
/*
* gd->secure_ram tracks the location of secure memory.
* It was set as if the memory starts from 0.
* The address needs to add the offset of its bank.
*/
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
if (gd->ram_size > CONFIG_SYS_LS2_DDR_BLOCK1_SIZE) {
gd->bd->bi_dram[0].size = CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
gd->bd->bi_dram[1].size = gd->ram_size -
CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
gd->secure_ram = gd->bd->bi_dram[1].start +
gd->secure_ram -
CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
#endif
} else {
gd->bd->bi_dram[0].size = gd->ram_size;
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram;
gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
#endif
}
#ifdef CONFIG_SYS_DP_DDR_BASE_PHY