diff --git a/arch/arm/cpu/arm926ejs/mx28/Makefile b/arch/arm/cpu/arm926ejs/mx28/Makefile index 7845310cfe..372de8a5e4 100644 --- a/arch/arm/cpu/arm926ejs/mx28/Makefile +++ b/arch/arm/cpu/arm926ejs/mx28/Makefile @@ -27,6 +27,10 @@ LIB = $(obj)lib$(SOC).o COBJS = clock.o mx28.o iomux.o timer.o +ifdef CONFIG_SPL_BUILD +COBJS += memsize.o spl_boot.o spl_mem_init.o spl_power_init.o +endif + SRCS := $(START:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) START := $(addprefix $(obj),$(START)) @@ -36,6 +40,11 @@ all: $(obj).depend $(LIB) $(LIB): $(OBJS) $(call cmd_link_o_target, $(OBJS)) +ifdef CONFIG_SPL_BUILD +memsize.c: + ln -sf $(TOPDIR)/common/memsize.c $@ +endif + ######################################################################### # defines $(obj).depend target diff --git a/board/denx/m28evk/m28_init.h b/arch/arm/cpu/arm926ejs/mx28/mx28_init.h similarity index 100% rename from board/denx/m28evk/m28_init.h rename to arch/arm/cpu/arm926ejs/mx28/mx28_init.h diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_boot.c b/arch/arm/cpu/arm926ejs/mx28/spl_boot.c new file mode 100644 index 0000000000..3cd4c249ab --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mx28/spl_boot.c @@ -0,0 +1,87 @@ +/* + * Freescale i.MX28 Boot setup + * + * Copyright (C) 2011 Marek Vasut + * on behalf of DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include "mx28_init.h" + +/* + * This delay function is intended to be used only in early stage of boot, where + * clock are not set up yet. The timer used here is reset on every boot and + * takes a few seconds to roll. The boot doesn't take that long, so to keep the + * code simple, it doesn't take rolling into consideration. + */ +#define HW_DIGCTRL_MICROSECONDS 0x8001c0c0 +void early_delay(int delay) +{ + uint32_t st = readl(HW_DIGCTRL_MICROSECONDS); + st += delay; + while (st > readl(HW_DIGCTRL_MICROSECONDS)) + ; +} + +void mx28_common_spl_init(const iomux_cfg_t *iomux_setup, + const unsigned int iomux_size) +{ + mxs_iomux_setup_multiple_pads(iomux_setup, iomux_size); + mx28_power_init(); + mx28_mem_init(); + mx28_power_wait_pswitch(); +} + +/* Support aparatus */ +inline void board_init_f(unsigned long bootflag) +{ + for (;;) + ; +} + +inline void board_init_r(gd_t *id, ulong dest_addr) +{ + for (;;) + ; +} + +inline int printf(const char *fmt, ...) +{ + return 0; +} + +inline void __coloured_LED_init(void) {} +inline void __red_LED_on(void) {} +void coloured_LED_init(void) + __attribute__((weak, alias("__coloured_LED_init"))); +void red_LED_on(void) + __attribute__((weak, alias("__red_LED_on"))); +void hang(void) __attribute__ ((noreturn)); +void hang(void) +{ + for (;;) + ; +} diff --git a/board/denx/m28evk/mem_init.c b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c similarity index 99% rename from board/denx/m28evk/mem_init.c rename to arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c index 17d1f9b6a1..00493b8bf9 100644 --- a/board/denx/m28evk/mem_init.c +++ b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c @@ -29,7 +29,7 @@ #include #include -#include "m28_init.h" +#include "mx28_init.h" uint32_t dram_vals[] = { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, diff --git a/board/denx/m28evk/power_init.c b/arch/arm/cpu/arm926ejs/mx28/spl_power_init.c similarity index 99% rename from board/denx/m28evk/power_init.c rename to arch/arm/cpu/arm926ejs/mx28/spl_power_init.c index 27322b4ec1..a4dc2a31b7 100644 --- a/board/denx/m28evk/power_init.c +++ b/arch/arm/cpu/arm926ejs/mx28/spl_power_init.c @@ -28,7 +28,7 @@ #include #include -#include "m28_init.h" +#include "mx28_init.h" void mx28_power_clock2xtal(void) { diff --git a/board/denx/m28evk/start.S b/arch/arm/cpu/arm926ejs/mx28/start.S similarity index 100% rename from board/denx/m28evk/start.S rename to arch/arm/cpu/arm926ejs/mx28/start.S diff --git a/board/denx/m28evk/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/mx28/u-boot-spl.lds similarity index 97% rename from board/denx/m28evk/u-boot-spl.lds rename to arch/arm/cpu/arm926ejs/mx28/u-boot-spl.lds index e296a92ed8..893320f993 100644 --- a/board/denx/m28evk/u-boot-spl.lds +++ b/arch/arm/cpu/arm926ejs/mx28/u-boot-spl.lds @@ -37,7 +37,7 @@ SECTIONS . = ALIGN(4); .text : { - board/denx/m28evk/start.o (.text) + arch/arm/cpu/arm926ejs/mx28/start.o (.text) *(.text) } diff --git a/arch/arm/include/asm/arch-mx28/sys_proto.h b/arch/arm/include/asm/arch-mx28/sys_proto.h index a226ea4840..be1f7db2ae 100644 --- a/arch/arm/include/asm/arch-mx28/sys_proto.h +++ b/arch/arm/include/asm/arch-mx28/sys_proto.h @@ -29,4 +29,10 @@ int mx28_wait_mask_clr(struct mx28_register *reg, uint32_t mask, int timeout); int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int)); +#ifdef CONFIG_SPL_BUILD +#include +void mx28_common_spl_init(const iomux_cfg_t *iomux_setup, + const unsigned int iomux_size); +#endif + #endif /* __MX28_H__ */ diff --git a/board/denx/m28evk/Makefile b/board/denx/m28evk/Makefile index b6f002fe36..aa16c7d156 100644 --- a/board/denx/m28evk/Makefile +++ b/board/denx/m28evk/Makefile @@ -27,10 +27,8 @@ LIB = $(obj)lib$(BOARD).o ifndef CONFIG_SPL_BUILD COBJS := m28evk.o -endif - -ifdef CONFIG_SPL_BUILD -COBJS := mem_init.o mmc_boot.o power_init.o memsize.o +else +COBJS := spl_boot.o endif SRCS := $(COBJS:.o=.c) @@ -41,11 +39,6 @@ $(LIB): $(obj).depend $(OBJS) all: $(ALL) -ifdef CONFIG_SPL_BUILD -memsize.c: - ln -sf $(TOPDIR)/common/memsize.c $@ -endif - ######################################################################### # defines $(obj).depend target diff --git a/board/denx/m28evk/mmc_boot.c b/board/denx/m28evk/spl_boot.c similarity index 87% rename from board/denx/m28evk/mmc_boot.c rename to board/denx/m28evk/spl_boot.c index 86d3ab5e1c..86d7d876da 100644 --- a/board/denx/m28evk/mmc_boot.c +++ b/board/denx/m28evk/spl_boot.c @@ -1,5 +1,5 @@ /* - * Freescale i.MX28 Boot setup + * DENX M28 Boot setup * * Copyright (C) 2011 Marek Vasut * on behalf of DENX Software Engineering GmbH @@ -27,23 +27,8 @@ #include #include #include - -#include "m28_init.h" - -/* - * This delay function is intended to be used only in early stage of boot, where - * clock are not set up yet. The timer used here is reset on every boot and - * takes a few seconds to roll. The boot doesn't take that long, so to keep the - * code simple, it doesn't take rolling into consideration. - */ -#define HW_DIGCTRL_MICROSECONDS 0x8001c0c0 -void early_delay(int delay) -{ - uint32_t st = readl(HW_DIGCTRL_MICROSECONDS); - st += delay; - while (st > readl(HW_DIGCTRL_MICROSECONDS)) - ; -} +#include +#include #define MUX_CONFIG_LED (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL) #define MUX_CONFIG_LCD (MXS_PAD_3V3 | MXS_PAD_4MA) @@ -109,10 +94,6 @@ const iomux_cfg_t iomux_setup[] = { MX28_PAD_GPMI_RDY2__CAN0_TX, MX28_PAD_GPMI_RDY3__CAN0_RX, - /* I2C */ - MX28_PAD_I2C0_SCL__I2C0_SCL, - MX28_PAD_I2C0_SDA__I2C0_SDA, - /* TSC2007 */ MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MUX_CONFIG_TSC, @@ -235,39 +216,5 @@ const iomux_cfg_t iomux_setup[] = { void board_init_ll(void) { - mxs_iomux_setup_multiple_pads(iomux_setup, ARRAY_SIZE(iomux_setup)); - mx28_power_init(); - mx28_mem_init(); - mx28_power_wait_pswitch(); -} - -/* Support aparatus */ -inline void board_init_f(unsigned long bootflag) -{ - for (;;) - ; -} - -inline void board_init_r(gd_t *id, ulong dest_addr) -{ - for (;;) - ; -} - -inline int printf(const char *fmt, ...) -{ - return 0; -} - -inline void __coloured_LED_init(void) {} -inline void __red_LED_on(void) {} -void coloured_LED_init(void) - __attribute__((weak, alias("__coloured_LED_init"))); -void red_LED_on(void) - __attribute__((weak, alias("__red_LED_on"))); -void hang(void) __attribute__ ((noreturn)); -void hang(void) -{ - for (;;) - ; + mx28_common_spl_init(iomux_setup, ARRAY_SIZE(iomux_setup)); } diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index d4bd207d58..cdf7636c2f 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -48,8 +48,8 @@ */ #define CONFIG_SPL #define CONFIG_SPL_NO_CPU_SUPPORT_CODE -#define CONFIG_SPL_START_S_PATH "board/denx/m28evk" -#define CONFIG_SPL_LDSCRIPT "board/denx/m28evk/u-boot-spl.lds" +#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mx28" +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mx28/u-boot-spl.lds" /* * U-Boot Commands