SPI: added support for MX51 to mxc_spi
This patch add SPI support for the MX51 processor. Signed-off-by: Stefano Babic <sbabic@denx.de>
This commit is contained in:
parent
e98ecd7110
commit
d205ddcfc5
|
@ -31,7 +31,7 @@
|
|||
#error "i.MX27 CSPI not supported due to drastic differences in register definisions" \
|
||||
"See linux mxc_spi driver from Freescale for details."
|
||||
|
||||
#else
|
||||
#elif defined(CONFIG_MX31)
|
||||
|
||||
#include <asm/arch/mx31.h>
|
||||
|
||||
|
@ -56,6 +56,9 @@
|
|||
#define MXC_CSPICTRL_CHIPSELECT(x) (((x) & 0x3) << 24)
|
||||
#define MXC_CSPICTRL_BITCOUNT(x) (((x) & 0x1f) << 8)
|
||||
#define MXC_CSPICTRL_DATARATE(x) (((x) & 0x7) << 16)
|
||||
#define MXC_CSPICTRL_TC (1 << 8)
|
||||
#define MXC_CSPICTRL_RXOVF (1 << 6)
|
||||
#define MXC_CSPICTRL_MAXBITS 0x1f
|
||||
|
||||
#define MXC_CSPIPERIOD_32KHZ (1 << 15)
|
||||
|
||||
|
@ -65,12 +68,63 @@ static unsigned long spi_bases[] = {
|
|||
0x53f84000,
|
||||
};
|
||||
|
||||
#define OUT MX31_GPIO_DIRECTION_OUT
|
||||
#define mxc_gpio_direction mx31_gpio_direction
|
||||
#define mxc_gpio_set mx31_gpio_set
|
||||
#elif defined(CONFIG_MX51)
|
||||
#include <asm/arch/imx-regs.h>
|
||||
#include <asm/arch/clock.h>
|
||||
|
||||
#define MXC_CSPIRXDATA 0x00
|
||||
#define MXC_CSPITXDATA 0x04
|
||||
#define MXC_CSPICTRL 0x08
|
||||
#define MXC_CSPICON 0x0C
|
||||
#define MXC_CSPIINT 0x10
|
||||
#define MXC_CSPIDMA 0x14
|
||||
#define MXC_CSPISTAT 0x18
|
||||
#define MXC_CSPIPERIOD 0x1C
|
||||
#define MXC_CSPIRESET 0x00
|
||||
#define MXC_CSPICTRL_EN (1 << 0)
|
||||
#define MXC_CSPICTRL_MODE (1 << 1)
|
||||
#define MXC_CSPICTRL_XCH (1 << 2)
|
||||
#define MXC_CSPICTRL_CHIPSELECT(x) (((x) & 0x3) << 12)
|
||||
#define MXC_CSPICTRL_BITCOUNT(x) (((x) & 0xfff) << 20)
|
||||
#define MXC_CSPICTRL_PREDIV(x) (((x) & 0xF) << 12)
|
||||
#define MXC_CSPICTRL_POSTDIV(x) (((x) & 0xF) << 8)
|
||||
#define MXC_CSPICTRL_SELCHAN(x) (((x) & 0x3) << 18)
|
||||
#define MXC_CSPICTRL_MAXBITS 0xfff
|
||||
#define MXC_CSPICTRL_TC (1 << 7)
|
||||
#define MXC_CSPICTRL_RXOVF (1 << 6)
|
||||
|
||||
#define MXC_CSPIPERIOD_32KHZ (1 << 15)
|
||||
|
||||
/* Bit position inside CTRL register to be associated with SS */
|
||||
#define MXC_CSPICTRL_CHAN 18
|
||||
|
||||
/* Bit position inside CON register to be associated with SS */
|
||||
#define MXC_CSPICON_POL 4
|
||||
#define MXC_CSPICON_PHA 0
|
||||
#define MXC_CSPICON_SSPOL 12
|
||||
|
||||
static unsigned long spi_bases[] = {
|
||||
CSPI1_BASE_ADDR,
|
||||
CSPI2_BASE_ADDR,
|
||||
CSPI3_BASE_ADDR,
|
||||
};
|
||||
#define mxc_gpio_direction(gpio, dir) (0)
|
||||
#define mxc_gpio_set(gpio, value) {}
|
||||
#define OUT 1
|
||||
#else
|
||||
#error "Unsupported architecture"
|
||||
#endif
|
||||
|
||||
struct mxc_spi_slave {
|
||||
struct spi_slave slave;
|
||||
unsigned long base;
|
||||
u32 ctrl_reg;
|
||||
#if defined(CONFIG_MX51)
|
||||
u32 cfg_reg;
|
||||
#endif
|
||||
int gpio;
|
||||
};
|
||||
|
||||
|
@ -89,34 +143,161 @@ static inline void reg_write(unsigned long addr, u32 val)
|
|||
*(volatile unsigned long*)addr = val;
|
||||
}
|
||||
|
||||
void spi_cs_activate(struct spi_slave *slave)
|
||||
{
|
||||
struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
|
||||
if (mxcs->gpio > 0)
|
||||
mxc_gpio_set(mxcs->gpio, mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL);
|
||||
}
|
||||
|
||||
void spi_cs_deactivate(struct spi_slave *slave)
|
||||
{
|
||||
struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
|
||||
if (mxcs->gpio > 0)
|
||||
mxc_gpio_set(mxcs->gpio,
|
||||
!(mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL));
|
||||
}
|
||||
|
||||
#ifdef CONFIG_MX51
|
||||
static s32 spi_cfg(struct mxc_spi_slave *mxcs, unsigned int cs,
|
||||
unsigned int max_hz, unsigned int mode)
|
||||
{
|
||||
u32 clk_src = mxc_get_clock(MXC_CSPI_CLK);
|
||||
s32 pre_div = 0, post_div = 0, i, reg_ctrl, reg_config;
|
||||
u32 ss_pol = 0, sclkpol = 0, sclkpha = 0;
|
||||
|
||||
if (max_hz == 0) {
|
||||
printf("Error: desired clock is 0\n");
|
||||
return -1;
|
||||
}
|
||||
|
||||
reg_ctrl = reg_read(mxcs->base + MXC_CSPICTRL);
|
||||
|
||||
/* Reset spi */
|
||||
reg_write(mxcs->base + MXC_CSPICTRL, 0);
|
||||
reg_write(mxcs->base + MXC_CSPICTRL, (reg_ctrl | 0x1));
|
||||
|
||||
/*
|
||||
* The following computation is taken directly from Freescale's code.
|
||||
*/
|
||||
if (clk_src > max_hz) {
|
||||
pre_div = clk_src / max_hz;
|
||||
if (pre_div > 16) {
|
||||
post_div = pre_div / 16;
|
||||
pre_div = 15;
|
||||
}
|
||||
if (post_div != 0) {
|
||||
for (i = 0; i < 16; i++) {
|
||||
if ((1 << i) >= post_div)
|
||||
break;
|
||||
}
|
||||
if (i == 16) {
|
||||
printf("Error: no divider for the freq: %d\n",
|
||||
max_hz);
|
||||
return -1;
|
||||
}
|
||||
post_div = i;
|
||||
}
|
||||
}
|
||||
|
||||
debug("pre_div = %d, post_div=%d\n", pre_div, post_div);
|
||||
reg_ctrl = (reg_ctrl & ~MXC_CSPICTRL_SELCHAN(3)) |
|
||||
MXC_CSPICTRL_SELCHAN(cs);
|
||||
reg_ctrl = (reg_ctrl & ~MXC_CSPICTRL_PREDIV(0x0F)) |
|
||||
MXC_CSPICTRL_PREDIV(pre_div);
|
||||
reg_ctrl = (reg_ctrl & ~MXC_CSPICTRL_POSTDIV(0x0F)) |
|
||||
MXC_CSPICTRL_POSTDIV(post_div);
|
||||
|
||||
/* always set to master mode */
|
||||
reg_ctrl |= 1 << (cs + 4);
|
||||
|
||||
/* We need to disable SPI before changing registers */
|
||||
reg_ctrl &= ~MXC_CSPICTRL_EN;
|
||||
|
||||
if (mode & SPI_CS_HIGH)
|
||||
ss_pol = 1;
|
||||
|
||||
if (!(mode & SPI_CPOL))
|
||||
sclkpol = 1;
|
||||
|
||||
if (mode & SPI_CPHA)
|
||||
sclkpha = 1;
|
||||
|
||||
reg_config = reg_read(mxcs->base + MXC_CSPICON);
|
||||
|
||||
/*
|
||||
* Configuration register setup
|
||||
* The MX51 has support different setup for each SS
|
||||
*/
|
||||
reg_config = (reg_config & ~(1 << (cs + MXC_CSPICON_SSPOL))) |
|
||||
(ss_pol << (cs + MXC_CSPICON_SSPOL));
|
||||
reg_config = (reg_config & ~(1 << (cs + MXC_CSPICON_POL))) |
|
||||
(sclkpol << (cs + MXC_CSPICON_POL));
|
||||
reg_config = (reg_config & ~(1 << (cs + MXC_CSPICON_PHA))) |
|
||||
(sclkpha << (cs + MXC_CSPICON_PHA));
|
||||
|
||||
debug("reg_ctrl = 0x%x\n", reg_ctrl);
|
||||
reg_write(mxcs->base + MXC_CSPICTRL, reg_ctrl);
|
||||
debug("reg_config = 0x%x\n", reg_config);
|
||||
reg_write(mxcs->base + MXC_CSPICON, reg_config);
|
||||
|
||||
/* save config register and control register */
|
||||
mxcs->ctrl_reg = reg_ctrl;
|
||||
mxcs->cfg_reg = reg_config;
|
||||
|
||||
/* clear interrupt reg */
|
||||
reg_write(mxcs->base + MXC_CSPIINT, 0);
|
||||
reg_write(mxcs->base + MXC_CSPISTAT,
|
||||
MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF);
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
static u32 spi_xchg_single(struct spi_slave *slave, u32 data, int bitlen,
|
||||
unsigned long flags)
|
||||
{
|
||||
struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
|
||||
unsigned int cfg_reg = reg_read(mxcs->base + MXC_CSPICTRL);
|
||||
|
||||
mxcs->ctrl_reg = (mxcs->ctrl_reg & ~MXC_CSPICTRL_BITCOUNT(31)) |
|
||||
if (flags & SPI_XFER_BEGIN)
|
||||
spi_cs_activate(slave);
|
||||
|
||||
mxcs->ctrl_reg = (mxcs->ctrl_reg &
|
||||
~MXC_CSPICTRL_BITCOUNT(MXC_CSPICTRL_MAXBITS)) |
|
||||
MXC_CSPICTRL_BITCOUNT(bitlen - 1);
|
||||
|
||||
if (cfg_reg != mxcs->ctrl_reg)
|
||||
reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg);
|
||||
reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg | MXC_CSPICTRL_EN);
|
||||
#ifdef CONFIG_MX51
|
||||
reg_write(mxcs->base + MXC_CSPICON, mxcs->cfg_reg);
|
||||
#endif
|
||||
|
||||
if (mxcs->gpio > 0 && (flags & SPI_XFER_BEGIN))
|
||||
mx31_gpio_set(mxcs->gpio, mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL);
|
||||
/* Clear interrupt register */
|
||||
reg_write(mxcs->base + MXC_CSPISTAT,
|
||||
MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF);
|
||||
|
||||
debug("Sending SPI 0x%x\n", data);
|
||||
reg_write(mxcs->base + MXC_CSPITXDATA, data);
|
||||
|
||||
reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg | MXC_CSPICTRL_XCH);
|
||||
/* FIFO is written, now starts the transfer setting the XCH bit */
|
||||
reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg |
|
||||
MXC_CSPICTRL_EN | MXC_CSPICTRL_XCH);
|
||||
|
||||
while (reg_read(mxcs->base + MXC_CSPICTRL) & MXC_CSPICTRL_XCH)
|
||||
/* Wait until the TC (Transfer completed) bit is set */
|
||||
while ((reg_read(mxcs->base + MXC_CSPISTAT) & MXC_CSPICTRL_TC) == 0)
|
||||
;
|
||||
|
||||
if (mxcs->gpio > 0 && (flags & SPI_XFER_END)) {
|
||||
mx31_gpio_set(mxcs->gpio,
|
||||
!(mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL));
|
||||
}
|
||||
/* Transfer completed, clear any pending request */
|
||||
reg_write(mxcs->base + MXC_CSPISTAT,
|
||||
MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF);
|
||||
|
||||
data = reg_read(mxcs->base + MXC_CSPIRXDATA);
|
||||
debug("SPI Rx: 0x%x\n", data);
|
||||
|
||||
if (flags & SPI_XFER_END)
|
||||
spi_cs_deactivate(slave);
|
||||
|
||||
return data;
|
||||
|
||||
return reg_read(mxcs->base + MXC_CSPIRXDATA);
|
||||
}
|
||||
|
||||
int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
|
||||
|
@ -176,7 +357,7 @@ static int decode_cs(struct mxc_spi_slave *mxcs, unsigned int cs)
|
|||
if (cs > 3) {
|
||||
mxcs->gpio = cs >> 8;
|
||||
cs &= 3;
|
||||
ret = mx31_gpio_direction(mxcs->gpio, MX31_GPIO_DIRECTION_OUT);
|
||||
ret = mxc_gpio_direction(mxcs->gpio, OUT);
|
||||
if (ret) {
|
||||
printf("mxc_spi: cannot setup gpio %d\n", mxcs->gpio);
|
||||
return -EINVAL;
|
||||
|
@ -210,6 +391,20 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
|
|||
|
||||
cs = ret;
|
||||
|
||||
mxcs->slave.bus = bus;
|
||||
mxcs->slave.cs = cs;
|
||||
mxcs->base = spi_bases[bus];
|
||||
|
||||
#ifdef CONFIG_MX51
|
||||
/* Can be used for i.MX31 too ? */
|
||||
ctrl_reg = 0;
|
||||
ret = spi_cfg(mxcs, cs, max_hz, mode);
|
||||
if (ret) {
|
||||
printf("mxc_spi: cannot setup SPI controller\n");
|
||||
free(mxcs);
|
||||
return NULL;
|
||||
}
|
||||
#else
|
||||
ctrl_reg = MXC_CSPICTRL_CHIPSELECT(cs) |
|
||||
MXC_CSPICTRL_BITCOUNT(31) |
|
||||
MXC_CSPICTRL_DATARATE(7) | /* FIXME: calculate data rate */
|
||||
|
@ -222,12 +417,8 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
|
|||
ctrl_reg |= MXC_CSPICTRL_POL;
|
||||
if (mode & SPI_CS_HIGH)
|
||||
ctrl_reg |= MXC_CSPICTRL_SSPOL;
|
||||
|
||||
mxcs->slave.bus = bus;
|
||||
mxcs->slave.cs = cs;
|
||||
mxcs->base = spi_bases[bus];
|
||||
mxcs->ctrl_reg = ctrl_reg;
|
||||
|
||||
#endif
|
||||
return &mxcs->slave;
|
||||
}
|
||||
|
||||
|
|
Loading…
Reference in a new issue