Use out_be32() and friends to access memory-mapped registers in sequoia.c

Signed-off-by: Larry Johnson <lrj@acm.org>
This commit is contained in:
Larry Johnson 2007-12-22 15:34:39 -05:00 committed by Stefan Roese
parent c68f59fe3e
commit d3471173e1

View file

@ -48,31 +48,31 @@ int board_early_init_f(void)
* Setup the GPIO pins
*-------------------------------------------------------------------*/
/* test-only: take GPIO init from pcs440ep ???? in config file */
out32(GPIO0_OR, 0x00000000);
out32(GPIO0_TCR, 0x0000000f);
out32(GPIO0_OSRL, 0x50015400);
out32(GPIO0_OSRH, 0x550050aa);
out32(GPIO0_TSRL, 0x50015400);
out32(GPIO0_TSRH, 0x55005000);
out32(GPIO0_ISR1L, 0x50000000);
out32(GPIO0_ISR1H, 0x00000000);
out32(GPIO0_ISR2L, 0x00000000);
out32(GPIO0_ISR2H, 0x00000100);
out32(GPIO0_ISR3L, 0x00000000);
out32(GPIO0_ISR3H, 0x00000000);
out_be32((u32 *) GPIO0_OR, 0x00000000);
out_be32((u32 *) GPIO0_TCR, 0x0000000f);
out_be32((u32 *) GPIO0_OSRL, 0x50015400);
out_be32((u32 *) GPIO0_OSRH, 0x550050aa);
out_be32((u32 *) GPIO0_TSRL, 0x50015400);
out_be32((u32 *) GPIO0_TSRH, 0x55005000);
out_be32((u32 *) GPIO0_ISR1L, 0x50000000);
out_be32((u32 *) GPIO0_ISR1H, 0x00000000);
out_be32((u32 *) GPIO0_ISR2L, 0x00000000);
out_be32((u32 *) GPIO0_ISR2H, 0x00000100);
out_be32((u32 *) GPIO0_ISR3L, 0x00000000);
out_be32((u32 *) GPIO0_ISR3H, 0x00000000);
out32(GPIO1_OR, 0x00000000);
out32(GPIO1_TCR, 0xc2000000);
out32(GPIO1_OSRL, 0x5c280000);
out32(GPIO1_OSRH, 0x00000000);
out32(GPIO1_TSRL, 0x0c000000);
out32(GPIO1_TSRH, 0x00000000);
out32(GPIO1_ISR1L, 0x00005550);
out32(GPIO1_ISR1H, 0x00000000);
out32(GPIO1_ISR2L, 0x00050000);
out32(GPIO1_ISR2H, 0x00000000);
out32(GPIO1_ISR3L, 0x01400000);
out32(GPIO1_ISR3H, 0x00000000);
out_be32((u32 *) GPIO1_OR, 0x00000000);
out_be32((u32 *) GPIO1_TCR, 0xc2000000);
out_be32((u32 *) GPIO1_OSRL, 0x5c280000);
out_be32((u32 *) GPIO1_OSRH, 0x00000000);
out_be32((u32 *) GPIO1_TSRL, 0x0c000000);
out_be32((u32 *) GPIO1_TSRH, 0x00000000);
out_be32((u32 *) GPIO1_ISR1L, 0x00005550);
out_be32((u32 *) GPIO1_ISR1H, 0x00000000);
out_be32((u32 *) GPIO1_ISR2L, 0x00050000);
out_be32((u32 *) GPIO1_ISR2H, 0x00000000);
out_be32((u32 *) GPIO1_ISR3L, 0x01400000);
out_be32((u32 *) GPIO1_ISR3H, 0x00000000);
/*--------------------------------------------------------------------
* Setup the interrupt controller polarities, triggers, etc.
@ -102,16 +102,16 @@ int board_early_init_f(void)
mtdcr(uic2sr, 0xffffffff); /* clear all */
/* 50MHz tmrclk */
*(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
out_8((u8 *) CFG_BCSR_BASE + 0x04, 0x00);
/* clear write protects */
*(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00;
out_8((u8 *) CFG_BCSR_BASE + 0x07, 0x00);
/* enable Ethernet */
*(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0x00;
out_8((u8 *) CFG_BCSR_BASE + 0x08, 0x00);
/* enable USB device */
*(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x20;
out_8((u8 *) CFG_BCSR_BASE + 0x09, 0x20);
/* select Ethernet pins */
mfsdr(SDR0_PFC1, sdr0_pfc1);