board/BuR/tseries: reactivate NAND-board
The NAND-version has been become a bit orphan. Now we need to reactivate it, so bring necessary things: - loading devicetree - switch control signal to correct pins - setup pinmux - default-environment up to date. Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>utp
Hannes Petermaier
Tom Rini
parent
47c14227b8
commit
d79c138c75
|
|
@ -33,6 +33,7 @@
|
|||
#endif
|
||||
#include "bur_common.h"
|
||||
#include "../../../drivers/video/am335x-fb.h"
|
||||
#include <nand.h>
|
||||
|
||||
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
|
||||
|
||||
|
|
@ -159,17 +160,22 @@ int load_lcdtiming(struct am335x_lcdpanel *panel)
|
|||
#ifdef CONFIG_USE_FDT
|
||||
static int load_devicetree(void)
|
||||
{
|
||||
char *dtbname = getenv("dtb");
|
||||
char *dtbdev = getenv("dtbdev");
|
||||
char *dtppart = getenv("dtbpart");
|
||||
u32 dtbaddr = getenv_ulong("dtbaddr", 16, 0UL);
|
||||
int rc;
|
||||
loff_t dtbsize;
|
||||
u32 dtbaddr = getenv_ulong("dtbaddr", 16, 0UL);
|
||||
|
||||
if (dtbaddr == 0) {
|
||||
printf("%s: don't have a valid <dtbaddr> in env!\n", __func__);
|
||||
return -1;
|
||||
}
|
||||
#ifdef CONFIG_NAND
|
||||
dtbsize = 0x20000;
|
||||
rc = nand_read_skip_bad(&nand_info[0], 0x40000, (size_t *)&dtbsize,
|
||||
NULL, 0x20000, (u_char *)dtbaddr);
|
||||
#else
|
||||
char *dtbname = getenv("dtb");
|
||||
char *dtbdev = getenv("dtbdev");
|
||||
char *dtppart = getenv("dtbpart");
|
||||
if (!dtbdev || !dtbdev || !dtbname) {
|
||||
printf("%s: <dtbdev>/<dtbpart>/<dtb> missing.\n", __func__);
|
||||
return -1;
|
||||
|
|
@ -180,6 +186,7 @@ static int load_devicetree(void)
|
|||
return -1;
|
||||
}
|
||||
rc = fs_read(dtbname, (u32)dtbaddr, 0, 0, &dtbsize);
|
||||
#endif
|
||||
if (rc == 0) {
|
||||
gd->fdt_blob = (void *)dtbaddr;
|
||||
gd->fdt_size = dtbsize;
|
||||
|
|
|
|||
|
|
@ -128,6 +128,9 @@ void am33xx_spl_board_init(void)
|
|||
i2c_set_bus_num(0);
|
||||
i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
|
||||
pmicsetup(0);
|
||||
|
||||
gpio_direction_output(64+29, 1); /* switch NAND_RnB to GPMC_WAIT1 */
|
||||
gpio_direction_output(64+28, 1); /* switch MII2_CRS to GPMC_WAIT0 */
|
||||
}
|
||||
|
||||
const struct dpll_params *get_dpll_ddr_params(void)
|
||||
|
|
|
|||
|
|
@ -123,7 +123,7 @@ static struct module_pin_mux nand_pin_mux[] = {
|
|||
{OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */
|
||||
{OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */
|
||||
{OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */
|
||||
{OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
|
||||
{OFFSET(gpmc_clk), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
|
||||
{OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */
|
||||
{OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */
|
||||
{OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
|
||||
|
|
|
|||
|
|
@ -23,6 +23,8 @@
|
|||
#define CONFIG_HW_WATCHDOG
|
||||
#define CONFIG_OMAP_WATCHDOG
|
||||
#define CONFIG_SPL_WATCHDOG_SUPPORT
|
||||
|
||||
#define CONFIG_SPL_GPIO_SUPPORT
|
||||
/* Bootcount using the RTC block */
|
||||
#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000
|
||||
#define CONFIG_BOOTCOUNT_LIMIT
|
||||
|
|
@ -103,15 +105,16 @@
|
|||
"mtdparts=" MTDPARTS_DEFAULT "\0" \
|
||||
"nandargs=setenv bootargs console=${console} " \
|
||||
"${optargs} " \
|
||||
"root=${nandroot} " \
|
||||
"rootfstype=${nandrootfstype}\0" \
|
||||
"nandroot=ubi0:rootfs rw ubi.mtd=8,2048\0" \
|
||||
"nandrootfstype=ubifs rootwait=1\0" \
|
||||
"nandimgsize=0x500000\0" \
|
||||
"nandboot=echo Booting from nand ...; " \
|
||||
"root=mtd6 " \
|
||||
"rootfstype=jffs2\0" \
|
||||
"kernelsize=0x400000\0" \
|
||||
"nandboot=echo booting from nand ...; " \
|
||||
"run nandargs; " \
|
||||
"nand read ${loadaddr} kernel ${nandimgsize}; " \
|
||||
"bootz ${loadaddr}\0"
|
||||
"nand read ${loadaddr} kernel ${kernelsize}; " \
|
||||
"bootz ${loadaddr} - ${dtbaddr}\0" \
|
||||
"defboot=run nandboot\0" \
|
||||
"bootlimit=1\0" \
|
||||
"altbootcmd=run usbscript\0"
|
||||
#else
|
||||
#define NANDARGS ""
|
||||
#endif /* CONFIG_NAND */
|
||||
|
|
@ -231,15 +234,15 @@ MMCARGS
|
|||
|
||||
#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
|
||||
#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:" \
|
||||
"128k(SPL)," \
|
||||
"128k(SPL.backup1)," \
|
||||
"128k(SPL.backup2)," \
|
||||
"128k(SPL.backup3)," \
|
||||
"512k(u-boot)," \
|
||||
"128k(u-boot-spl-os)," \
|
||||
"128k(MLO)," \
|
||||
"128k(MLO.backup)," \
|
||||
"128k(dtb)," \
|
||||
"128k(u-boot-env)," \
|
||||
"5m(kernel),"\
|
||||
"-(rootfs)"
|
||||
"512k(u-boot)," \
|
||||
"4m(kernel),"\
|
||||
"128m(rootfs),"\
|
||||
"-(user)"
|
||||
#define CONFIG_NAND_OMAP_GPMC_WSCFG 1
|
||||
#endif /* CONFIG_NAND */
|
||||
|
||||
/* USB configuration */
|
||||
|
|
@ -298,7 +301,7 @@ MMCARGS
|
|||
#else
|
||||
#define CONFIG_ENV_IS_IN_NAND
|
||||
#endif
|
||||
#define CONFIG_ENV_OFFSET 0x120000 /* TODO: Adresse definieren */
|
||||
#define CONFIG_ENV_OFFSET 0x60000
|
||||
#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_ENV_SIZE
|
||||
#else
|
||||
#error "no storage for Environment defined!"
|
||||
|
|
|
|||
Loading…
Reference in New Issue