redonkable
/
remarkable-uboot
1
0
Fork 0
Code Releases Activity

x86: Allow use of serial soon after relocation 

At present on x86 machines with use cache-as-RAM, the memory goes away just
before board_init_r() is called. This means that serial drivers are
no-longer unavailable, until initr_dm() it called, etc.

Any attempt to use printf() within this period will cause a hang.

To fix this, mark the serial devices as 'unavailable' when it is no-longer
available. Bring it back when serial_initialize() is called. This means that
the debug UART will be used instead for this period.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
utp
Simon Glass 2016-03-11 22:06:51 -07:00 committed by Bin Meng
parent 8226a3e99f
commit e4d6ab0c2c
2 changed files with 8 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
common/board_f.c
View File

@ -1095,6 +1095,13 @@ void board_init_f_r(void)
if (initcall_run_list(init_sequence_f_r))
hang();
/*
* The pre-relocation drivers may be using memory that has now gone
* away. Mark serial as unavailable - this will fall back to the debug
* UART if available.
*/
gd->flags &= ~GD_FLG_SERIAL_READY;
/*
* U-Boot has been copied into SDRAM, the BSS has been cleared etc.
* Transfer execution from Flash to RAM by calculating the address

2
drivers/serial/serial-uclass.c
View File

@ -115,7 +115,7 @@ int serial_init(void)
/* Called after relocation */
void serial_initialize(void)
{
serial_find_console_or_panic();
serial_init();
}
static void _serial_putc(struct udevice *dev, char ch)