redonkable
/
remarkable-uboot
1
0
Fork 0
Code Releases Activity

ARM: DRA7: Add ABB setup for all domains 

ABB should be initialized for all required domains voltage domain
for DRA7: IVA, GPU, EVE in addition to the existing MPU domain. If
we do not do this, kernel configuring just the frequency using the
default boot loader configured voltage can fail on many corner lot
units and has been hard to debug. This specifically is a concern with
DRA7 generation of SoCs since other than VDD_MPU, all other domains
are only permitted to setup the voltages to required OPP only at boot.

Reported-by: Richard Woodruff <r-woodruff2@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
utp
Nishanth Menon 2016-04-21 14:34:25 -05:00 committed by Tom Rini
parent a818097a33
commit e52e334e5c
6 changed files with 55 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

24
arch/arm/cpu/armv7/omap-common/clocks-common.c
View File

@ -596,10 +596,34 @@ void scale_vcores(struct vcores_data const *vcores)
debug("gpu: %d\n", vcores->gpu.value);
do_scale_vcore(vcores->gpu.addr, vcores->gpu.value, vcores->gpu.pmic);
/* Configure GPU ABB LDO after scale */
abb_setup(vcores->gpu.efuse.reg,
(*ctrl)->control_wkup_ldovbb_gpu_voltage_ctrl,
(*prcm)->prm_abbldo_gpu_setup,
(*prcm)->prm_abbldo_gpu_ctrl,
(*prcm)->prm_irqstatus_mpu,
vcores->gpu.abb_tx_done_mask,
OMAP_ABB_FAST_OPP);
debug("eve: %d\n", vcores->eve.value);
do_scale_vcore(vcores->eve.addr, vcores->eve.value, vcores->eve.pmic);
/* Configure EVE ABB LDO after scale */
abb_setup(vcores->eve.efuse.reg,
(*ctrl)->control_wkup_ldovbb_eve_voltage_ctrl,
(*prcm)->prm_abbldo_eve_setup,
(*prcm)->prm_abbldo_eve_ctrl,
(*prcm)->prm_irqstatus_mpu,
vcores->eve.abb_tx_done_mask,
OMAP_ABB_FAST_OPP);
debug("iva: %d\n", vcores->iva.value);
do_scale_vcore(vcores->iva.addr, vcores->iva.value, vcores->iva.pmic);
/* Configure IVA ABB LDO after scale */
abb_setup(vcores->iva.efuse.reg,
(*ctrl)->control_wkup_ldovbb_iva_voltage_ctrl,
(*prcm)->prm_abbldo_iva_setup,
(*prcm)->prm_abbldo_iva_ctrl,
(*prcm)->prm_irqstatus_mpu,
vcores->iva.abb_tx_done_mask,
OMAP_ABB_FAST_OPP);
/* Might need udelay(1000) here if debug is enabled to see all prints */
#else
u32 val;

6
arch/arm/cpu/armv7/omap5/hw_data.c
View File

@ -377,12 +377,14 @@ struct vcores_data dra752_volts = {
.eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
.eve.addr = TPS659038_REG_ADDR_SMPS45,
.eve.pmic = &tps659038,
.eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK,
.gpu.value = VDD_GPU_DRA752,
.gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU_NOM,
.gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
.gpu.addr = TPS659038_REG_ADDR_SMPS6,
.gpu.pmic = &tps659038,
.gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK,
.core.value = VDD_CORE_DRA752,
.core.efuse.reg = STD_FUSE_OPP_VMIN_CORE_NOM,
@ -395,6 +397,7 @@ struct vcores_data dra752_volts = {
.iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
.iva.addr = TPS659038_REG_ADDR_SMPS8,
.iva.pmic = &tps659038,
.iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK,
};
struct vcores_data dra722_volts = {
@ -420,18 +423,21 @@ struct vcores_data dra722_volts = {
.gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
.gpu.addr = TPS65917_REG_ADDR_SMPS3,
.gpu.pmic = &tps659038,
.gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK,
.eve.value = VDD_EVE_DRA72x,
.eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE_NOM,
.eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
.eve.addr = TPS65917_REG_ADDR_SMPS3,
.eve.pmic = &tps659038,
.eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK,
.iva.value = VDD_IVA_DRA72x,
.iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA_NOM,
.iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
.iva.addr = TPS65917_REG_ADDR_SMPS3,
.iva.pmic = &tps659038,
.iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK,
};
/*

10
arch/arm/cpu/armv7/omap5/prcm-regs.c
View File

@ -446,6 +446,9 @@ struct omap_sys_ctrl_regs const dra7xx_ctrl = {
.control_emif1_sdram_config_ext = 0x4AE0C144,
.control_emif2_sdram_config_ext = 0x4AE0C148,
.control_wkup_ldovbb_mpu_voltage_ctrl = 0x4AE0C158,
.control_wkup_ldovbb_iva_voltage_ctrl = 0x4A002470,
.control_wkup_ldovbb_eve_voltage_ctrl = 0x4A00246C,
.control_wkup_ldovbb_gpu_voltage_ctrl = 0x4AE0C154,
.control_std_fuse_die_id_0 = 0x4AE0C200,
.control_std_fuse_die_id_1 = 0x4AE0C208,
.control_std_fuse_die_id_2 = 0x4AE0C20C,
@ -831,6 +834,7 @@ struct prcm_regs const dra7xx_prcm = {
.cm_ipu_i2c5_clkctrl = 0x4a005578,
/* prm irqstatus regs */
.prm_irqstatus_mpu = 0x4ae06010,
.prm_irqstatus_mpu_2 = 0x4ae06014,
/* cm2.ckgen */
@ -999,6 +1003,12 @@ struct prcm_regs const dra7xx_prcm = {
.prm_abbldo_mpu_setup = 0x4AE07DDC,
.prm_abbldo_mpu_ctrl = 0x4AE07DE0,
.prm_abbldo_iva_setup = 0x4AE07E34,
.prm_abbldo_iva_ctrl = 0x4AE07E24,
.prm_abbldo_eve_setup = 0x4AE07E30,
.prm_abbldo_eve_ctrl = 0x4AE07E20,
.prm_abbldo_gpu_setup = 0x4AE07DE4,
.prm_abbldo_gpu_ctrl = 0x4AE07DE8,
/*l3main1 edma*/
.cm_l3main1_tptc1_clkctrl = 0x4a008778,

3
arch/arm/include/asm/arch-omap5/omap.h
View File

@ -216,6 +216,9 @@ struct s32ktimer {
/* ABB tranxdone mask */
#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 7)
#define OMAP_ABB_MM_TXDONE_MASK (0x1 << 31)
#define OMAP_ABB_IVA_TXDONE_MASK (0x1 << 30)
#define OMAP_ABB_EVE_TXDONE_MASK (0x1 << 29)
#define OMAP_ABB_GPU_TXDONE_MASK (0x1 << 28)
/* ABB efuse masks */
#define OMAP5_ABB_FUSE_VSET_MASK (0x1F << 24)

9
arch/arm/include/asm/omap_common.h
View File

@ -324,6 +324,12 @@ struct prcm_regs {
u32 prm_abbldo_mpu_ctrl;
u32 prm_abbldo_mm_setup;
u32 prm_abbldo_mm_ctrl;
u32 prm_abbldo_iva_setup;
u32 prm_abbldo_iva_ctrl;
u32 prm_abbldo_eve_setup;
u32 prm_abbldo_eve_ctrl;
u32 prm_abbldo_gpu_setup;
u32 prm_abbldo_gpu_ctrl;
u32 cm_div_m4_dpll_core;
u32 cm_div_m5_dpll_core;
@ -445,6 +451,9 @@ struct omap_sys_ctrl_regs {
u32 control_emif2_sdram_config_ext;
u32 control_wkup_ldovbb_mpu_voltage_ctrl;
u32 control_wkup_ldovbb_mm_voltage_ctrl;
u32 control_wkup_ldovbb_iva_voltage_ctrl;
u32 control_wkup_ldovbb_eve_voltage_ctrl;
u32 control_wkup_ldovbb_gpu_voltage_ctrl;
u32 control_smart1nopmio_padconf_0;
u32 control_smart1nopmio_padconf_1;
u32 control_padconf_mode;

3
board/ti/am57xx/board.c
View File

@ -228,12 +228,14 @@ struct vcores_data beagle_x15_volts = {
.eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
.eve.addr = TPS659038_REG_ADDR_SMPS45,
.eve.pmic = &tps659038,
.eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK,
.gpu.value = VDD_GPU_DRA752,
.gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU_NOM,
.gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
.gpu.addr = TPS659038_REG_ADDR_SMPS45,
.gpu.pmic = &tps659038,
.gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK,
.core.value = VDD_CORE_DRA752,
.core.efuse.reg = STD_FUSE_OPP_VMIN_CORE_NOM,
@ -246,6 +248,7 @@ struct vcores_data beagle_x15_volts = {
.iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
.iva.addr = TPS659038_REG_ADDR_SMPS45,
.iva.pmic = &tps659038,
.iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK,
};
#ifdef CONFIG_SPL_BUILD