at91: add support for the PM9263 board of Ronetix GmbH
The PM9263 board is based on the AT91SAM9263-EK board. Here is the page on Ronetix website: http://www.ronetix.at/starter_kit_9263.html Signed-off-by: Ilko Iliev <iliev@ronetix.at> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This commit is contained in:
parent
dc39ae9513
commit
f0a2c7b4b6
|
@ -204,6 +204,10 @@ Klaus Heydeck <heydeck@kieback-peter.de>
|
|||
KUP4K MPC855
|
||||
KUP4X MPC859
|
||||
|
||||
Ilko Iliev <iliev@ronetix.at>
|
||||
|
||||
PM9263 AT91SAM9263
|
||||
|
||||
Gary Jennejohn <garyj@denx.de>
|
||||
|
||||
quad100hd PPC405EP
|
||||
|
|
1
MAKEALL
1
MAKEALL
|
@ -582,6 +582,7 @@ LIST_at91=" \
|
|||
kb9202 \
|
||||
mp2usb \
|
||||
m501sk \
|
||||
pm9263 \
|
||||
"
|
||||
|
||||
#########################################################################
|
||||
|
|
4
Makefile
4
Makefile
|
@ -2749,6 +2749,9 @@ at91sam9rlek_config : unconfig
|
|||
fi;
|
||||
@$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
|
||||
|
||||
pm9263_config : unconfig
|
||||
@$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
|
||||
|
||||
########################################################################
|
||||
## ARM Integrator boards - see doc/README-integrator for more info.
|
||||
integratorap_config \
|
||||
|
@ -3520,6 +3523,7 @@ clean:
|
|||
$(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \
|
||||
$(obj)board/bf5{18f,26,27,33,38f,48,61}-ez{brd,kit}/u-boot.lds \
|
||||
$(obj)board/bf5{33,37}-stamp/u-boot.lds \
|
||||
$(obj)cpu/arm926ejs/at91/u-boot.lds \
|
||||
$(obj)cpu/blackfin/bootrom-asm-offsets.[chs]
|
||||
@rm -f $(obj)include/bmp_logo.h
|
||||
@rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map}
|
||||
|
|
61
board/ronetix/pm9263/Makefile
Normal file
61
board/ronetix/pm9263/Makefile
Normal file
|
@ -0,0 +1,61 @@
|
|||
#
|
||||
# (C) Copyright 2003-2008
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# (C) Copyright 2008
|
||||
# Stelian Pop <stelian.pop@leadtechdesign.com>
|
||||
# Lead Tech Design <www.leadtechdesign.com>
|
||||
# Ilko Iliev <www.ronetix.at>
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk
|
||||
|
||||
LIB = $(obj)lib$(BOARD).a
|
||||
|
||||
COBJS-y += pm9263.o
|
||||
COBJS-y += led.o
|
||||
COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o
|
||||
|
||||
ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
||||
SOBJS-y := lowlevel_init.o
|
||||
endif
|
||||
|
||||
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS-y))
|
||||
SOBJS := $(addprefix $(obj),$(SOBJS-y))
|
||||
|
||||
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
|
||||
$(AR) $(ARFLAGS) $@ $(OBJS)
|
||||
|
||||
clean:
|
||||
rm -f $(SOBJS) $(OBJS)
|
||||
|
||||
distclean: clean
|
||||
rm -f $(LIB) core *.bak $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
|
||||
# defines $(obj).depend target
|
||||
include $(SRCTREE)/rules.mk
|
||||
|
||||
sinclude $(obj).depend
|
||||
|
||||
#########################################################################
|
1
board/ronetix/pm9263/config.mk
Normal file
1
board/ronetix/pm9263/config.mk
Normal file
|
@ -0,0 +1 @@
|
|||
TEXT_BASE = 0x23f00000
|
43
board/ronetix/pm9263/led.c
Normal file
43
board/ronetix/pm9263/led.c
Normal file
|
@ -0,0 +1,43 @@
|
|||
/*
|
||||
* (C) Copyright 2007-2008
|
||||
* Stelian Pop <stelian.pop@leadtechdesign.com>
|
||||
* Lead Tech Design <www.leadtechdesign.com>
|
||||
* Ilko Iliev <www.ronetix.at>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/arch/at91sam9263.h>
|
||||
#include <asm/arch/at91_pmc.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
#include <asm/arch/io.h>
|
||||
|
||||
void coloured_LED_init(void)
|
||||
{
|
||||
/* Enable clock */
|
||||
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOB |
|
||||
1 << AT91SAM9263_ID_PIOCDE);
|
||||
|
||||
at91_set_gpio_output(CONFIG_RED_LED, 1);
|
||||
at91_set_gpio_output(CONFIG_GREEN_LED, 1);
|
||||
|
||||
at91_set_gpio_value(CONFIG_RED_LED, 0);
|
||||
at91_set_gpio_value(CONFIG_GREEN_LED, 1);
|
||||
}
|
279
board/ronetix/pm9263/lowlevel_init.S
Normal file
279
board/ronetix/pm9263/lowlevel_init.S
Normal file
|
@ -0,0 +1,279 @@
|
|||
/*
|
||||
* Memory Setup stuff - taken from blob memsetup.S
|
||||
*
|
||||
* Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
|
||||
* Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
|
||||
*
|
||||
* Copyright (C) 2008 Ronetix Ilko Iliev (www.ronetix.at)
|
||||
* Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <config.h>
|
||||
#include <version.h>
|
||||
#include <asm/arch/hardware.h>
|
||||
#include <asm/arch/at91_pmc.h>
|
||||
#include <asm/arch/at91_pio.h>
|
||||
#include <asm/arch/at91_rstc.h>
|
||||
#include <asm/arch/at91_wdt.h>
|
||||
#include <asm/arch/at91sam9_sdramc.h>
|
||||
#include <asm/arch/at91sam9_smc.h>
|
||||
#include <asm/arch/at91sam9263_matrix.h>
|
||||
|
||||
_TEXT_BASE:
|
||||
.word TEXT_BASE
|
||||
|
||||
.globl lowlevel_init
|
||||
.type lowlevel_init,function
|
||||
lowlevel_init:
|
||||
|
||||
mov r5, pc /* r5 = POS1 + 4 current */
|
||||
POS1:
|
||||
ldr r0, =POS1 /* r0 = POS1 compile */
|
||||
ldr r2, _TEXT_BASE
|
||||
sub r0, r0, r2 /* r0 = POS1-_TEXT_BASE (POS1 relative) */
|
||||
sub r5, r5, r0 /* r0 = TEXT_BASE-1 */
|
||||
sub r5, r5, #4 /* r1 = text base - current */
|
||||
|
||||
/* memory control configuration 1 */
|
||||
ldr r0, =SMRDATA
|
||||
ldr r2, =SMRDATA1
|
||||
ldr r1, _TEXT_BASE
|
||||
sub r0, r0, r1
|
||||
sub r2, r2, r1
|
||||
add r0, r0, r5
|
||||
add r2, r2, r5
|
||||
0:
|
||||
/* the address */
|
||||
ldr r1, [r0], #4
|
||||
/* the value */
|
||||
ldr r3, [r0], #4
|
||||
str r3, [r1]
|
||||
cmp r2, r0
|
||||
bne 0b
|
||||
|
||||
/* ----------------------------------------------------------------------------
|
||||
* PMC Init Step 1.
|
||||
* ----------------------------------------------------------------------------
|
||||
* - Check if the PLL is already initialized
|
||||
* ----------------------------------------------------------------------------
|
||||
*/
|
||||
ldr r1, =(AT91_BASE_SYS + AT91_PMC_MCKR)
|
||||
ldr r0, [r1]
|
||||
and r0, r0, #3
|
||||
cmp r0, #0
|
||||
bne PLL_setup_end
|
||||
|
||||
/* ---------------------------------------------------------------------------
|
||||
* - Enable the Main Oscillator
|
||||
* ---------------------------------------------------------------------------
|
||||
*/
|
||||
ldr r1, =(AT91_BASE_SYS + AT91_CKGR_MOR)
|
||||
ldr r2, =(AT91_BASE_SYS + AT91_PMC_SR)
|
||||
ldr r0, =0x0000FF01
|
||||
str r0, [r1] /* Enable main oscillator, OSCOUNT = 0xFF */
|
||||
|
||||
/* Reading the PMC Status to detect when the Main Oscillator is enabled */
|
||||
mov r4, #AT91_PMC_MOSCS
|
||||
MOSCS_Loop:
|
||||
ldr r3, [r2]
|
||||
and r3, r4, r3
|
||||
cmp r3, #AT91_PMC_MOSCS
|
||||
bne MOSCS_Loop
|
||||
|
||||
/* ----------------------------------------------------------------------------
|
||||
* PMC Init Step 2.
|
||||
* ----------------------------------------------------------------------------
|
||||
* Setup PLLA
|
||||
* ----------------------------------------------------------------------------
|
||||
*/
|
||||
ldr r1, =(AT91_BASE_SYS + AT91_CKGR_PLLAR)
|
||||
ldr r0, =CONFIG_SYS_PLLAR_VAL
|
||||
str r0, [r1]
|
||||
|
||||
/* Reading the PMC Status register to detect when the PLLA is locked */
|
||||
mov r4, #AT91_PMC_LOCKA
|
||||
MOSCS_Loop1:
|
||||
ldr r3, [r2]
|
||||
and r3, r4, r3
|
||||
cmp r3, #AT91_PMC_LOCKA
|
||||
bne MOSCS_Loop1
|
||||
|
||||
/* ----------------------------------------------------------------------------
|
||||
* PMC Init Step 3.
|
||||
* ----------------------------------------------------------------------------
|
||||
* - Switch on the Main Oscillator 18.432 MHz
|
||||
* ----------------------------------------------------------------------------
|
||||
*/
|
||||
ldr r1, =(AT91_BASE_SYS + AT91_PMC_MCKR)
|
||||
|
||||
/* -Master Clock Controller register PMC_MCKR */
|
||||
ldr r0, =CONFIG_SYS_MCKR1_VAL
|
||||
str r0, [r1]
|
||||
|
||||
/* Reading the PMC Status to detect when the Master clock is ready */
|
||||
mov r4, #AT91_PMC_MCKRDY
|
||||
MCKRDY_Loop:
|
||||
ldr r3, [r2]
|
||||
and r3, r4, r3
|
||||
cmp r3, #AT91_PMC_MCKRDY
|
||||
bne MCKRDY_Loop
|
||||
|
||||
ldr r0, =CONFIG_SYS_MCKR2_VAL
|
||||
str r0, [r1]
|
||||
|
||||
/* Reading the PMC Status to detect when the Master clock is ready */
|
||||
mov r4, #AT91_PMC_MCKRDY
|
||||
MCKRDY_Loop1:
|
||||
ldr r3, [r2]
|
||||
and r3, r4, r3
|
||||
cmp r3, #AT91_PMC_MCKRDY
|
||||
bne MCKRDY_Loop1
|
||||
|
||||
PLL_setup_end:
|
||||
|
||||
/* ----------------------------------------------------------------------------
|
||||
* - memory control configuration 2
|
||||
* ----------------------------------------------------------------------------
|
||||
*/
|
||||
ldr r0, =(AT91_BASE_SYS + AT91_SDRAMC_TR)
|
||||
ldr r1, [r0]
|
||||
cmp r1, #0
|
||||
bne SDRAM_setup_end
|
||||
|
||||
ldr r0, =SMRDATA1
|
||||
ldr r2, =SMRDATA2
|
||||
ldr r1, _TEXT_BASE
|
||||
sub r0, r0, r1
|
||||
sub r2, r2, r1
|
||||
add r0, r0, r5
|
||||
add r2, r2, r5
|
||||
|
||||
2:
|
||||
/* the address */
|
||||
ldr r1, [r0], #4
|
||||
/* the value */
|
||||
ldr r3, [r0], #4
|
||||
str r3, [r1]
|
||||
cmp r2, r0
|
||||
bne 2b
|
||||
|
||||
SDRAM_setup_end:
|
||||
/* everything is fine now */
|
||||
mov pc, lr
|
||||
|
||||
.ltorg
|
||||
|
||||
SMRDATA:
|
||||
.word (AT91_BASE_SYS + AT91_WDT_MR)
|
||||
.word CONFIG_SYS_WDTC_WDMR_VAL
|
||||
|
||||
.word (AT91_BASE_SYS + AT91_PIOD + PIO_PDR)
|
||||
.word CONFIG_SYS_PIOD_PDR_VAL1
|
||||
.word (AT91_BASE_SYS + AT91_PIOD + PIO_PUDR)
|
||||
.word CONFIG_SYS_PIOD_PPUDR_VAL
|
||||
.word (AT91_BASE_SYS + AT91_PIOD + PIO_ASR)
|
||||
.word CONFIG_SYS_PIOD_PPUDR_VAL
|
||||
|
||||
.word (AT91_BASE_SYS + AT91_MATRIX_EBI0CSA)
|
||||
.word CONFIG_SYS_MATRIX_EBI0CSA_VAL
|
||||
.word (AT91_BASE_SYS + AT91_MATRIX_EBI1CSA)
|
||||
.word CONFIG_SYS_MATRIX_EBI1CSA_VAL
|
||||
|
||||
/* flash */
|
||||
.word (AT91_BASE_SYS + AT91_SMC_MODE(0))
|
||||
.word CONFIG_SYS_SMC0_CTRL0_VAL
|
||||
|
||||
.word (AT91_BASE_SYS + AT91_SMC_CYCLE(0))
|
||||
.word CONFIG_SYS_SMC0_CYCLE0_VAL
|
||||
|
||||
.word (AT91_BASE_SYS + AT91_SMC_PULSE(0))
|
||||
.word CONFIG_SYS_SMC0_PULSE0_VAL
|
||||
|
||||
.word (AT91_BASE_SYS + AT91_SMC_SETUP(0))
|
||||
.word CONFIG_SYS_SMC0_SETUP0_VAL
|
||||
|
||||
/* PSRAM */
|
||||
.word (AT91_BASE_SYS + AT91_SMC1_MODE(0))
|
||||
.word CONFIG_SYS_SMC1_CTRL0_VAL
|
||||
|
||||
.word (AT91_BASE_SYS + AT91_SMC1_CYCLE(0))
|
||||
.word CONFIG_SYS_SMC1_CYCLE0_VAL
|
||||
|
||||
.word (AT91_BASE_SYS + AT91_SMC1_PULSE(0))
|
||||
.word CONFIG_SYS_SMC1_PULSE0_VAL
|
||||
|
||||
.word (AT91_BASE_SYS + AT91_SMC1_SETUP(0))
|
||||
.word CONFIG_SYS_SMC1_SETUP0_VAL
|
||||
|
||||
SMRDATA1:
|
||||
.word (AT91_BASE_SYS + AT91_SDRAMC_MR)
|
||||
.word CONFIG_SYS_SDRC_MR_VAL1
|
||||
.word (AT91_BASE_SYS + AT91_SDRAMC_TR)
|
||||
.word CONFIG_SYS_SDRC_TR_VAL1
|
||||
.word (AT91_BASE_SYS + AT91_SDRAMC_CR)
|
||||
.word CONFIG_SYS_SDRC_CR_VAL
|
||||
.word (AT91_BASE_SYS + AT91_SDRAMC_MDR)
|
||||
.word CONFIG_SYS_SDRC_MDR_VAL
|
||||
.word (AT91_BASE_SYS + AT91_SDRAMC_MR)
|
||||
.word CONFIG_SYS_SDRC_MR_VAL2
|
||||
.word AT91_SDRAM_BASE
|
||||
.word CONFIG_SYS_SDRAM_VAL1
|
||||
.word (AT91_BASE_SYS + AT91_SDRAMC_MR)
|
||||
.word CONFIG_SYS_SDRC_MR_VAL3
|
||||
.word AT91_SDRAM_BASE
|
||||
.word CONFIG_SYS_SDRAM_VAL2
|
||||
.word AT91_SDRAM_BASE
|
||||
.word CONFIG_SYS_SDRAM_VAL3
|
||||
.word AT91_SDRAM_BASE
|
||||
.word CONFIG_SYS_SDRAM_VAL4
|
||||
.word AT91_SDRAM_BASE
|
||||
.word CONFIG_SYS_SDRAM_VAL5
|
||||
.word AT91_SDRAM_BASE
|
||||
.word CONFIG_SYS_SDRAM_VAL6
|
||||
.word AT91_SDRAM_BASE
|
||||
.word CONFIG_SYS_SDRAM_VAL7
|
||||
.word AT91_SDRAM_BASE
|
||||
.word CONFIG_SYS_SDRAM_VAL8
|
||||
.word AT91_SDRAM_BASE
|
||||
.word CONFIG_SYS_SDRAM_VAL9
|
||||
.word (AT91_BASE_SYS + AT91_SDRAMC_MR)
|
||||
.word CONFIG_SYS_SDRC_MR_VAL4
|
||||
.word AT91_SDRAM_BASE
|
||||
.word CONFIG_SYS_SDRAM_VAL10
|
||||
.word (AT91_BASE_SYS + AT91_SDRAMC_MR)
|
||||
.word CONFIG_SYS_SDRC_MR_VAL5
|
||||
.word AT91_SDRAM_BASE
|
||||
.word CONFIG_SYS_SDRAM_VAL11
|
||||
.word (AT91_BASE_SYS + AT91_SDRAMC_TR)
|
||||
.word CONFIG_SYS_SDRC_TR_VAL2
|
||||
.word AT91_SDRAM_BASE
|
||||
.word CONFIG_SYS_SDRAM_VAL12
|
||||
/* User reset enable*/
|
||||
.word (AT91_BASE_SYS + AT91_RSTC_MR)
|
||||
.word CONFIG_SYS_RSTC_RMR_VAL
|
||||
#ifdef CONFIG_SYS_MATRIX_MCFG_REMAP
|
||||
/* MATRIX_MCFG - REMAP all masters */
|
||||
.word (AT91_BASE_SYS + AT91_MATRIX_MCFG0)
|
||||
.word 0x1FF
|
||||
#endif
|
||||
|
||||
SMRDATA2:
|
||||
.word 0
|
47
board/ronetix/pm9263/partition.c
Normal file
47
board/ronetix/pm9263/partition.c
Normal file
|
@ -0,0 +1,47 @@
|
|||
/*
|
||||
* (C) Copyright 2008
|
||||
* Ulf Samuelsson <ulf@atmel.com>
|
||||
* Ilko Iliev <www.ronetix.at>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*
|
||||
*/
|
||||
#include <common.h>
|
||||
#include <config.h>
|
||||
#include <asm/hardware.h>
|
||||
#include <dataflash.h>
|
||||
|
||||
AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
|
||||
|
||||
struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
|
||||
{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
|
||||
};
|
||||
|
||||
/*define the area offsets*/
|
||||
#ifdef CONFIG_SYS_USE_DATAFLASH
|
||||
dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
|
||||
{0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
|
||||
{0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
|
||||
{0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
|
||||
{0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
|
||||
{0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
|
||||
};
|
||||
#else
|
||||
dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
|
||||
{0x00000000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, ""},
|
||||
};
|
||||
|
||||
#endif
|
413
board/ronetix/pm9263/pm9263.c
Normal file
413
board/ronetix/pm9263/pm9263.c
Normal file
|
@ -0,0 +1,413 @@
|
|||
/*
|
||||
* (C) Copyright 2007-2008
|
||||
* Stelian Pop <stelian.pop@leadtechdesign.com>
|
||||
* Lead Tech Design <www.leadtechdesign.com>
|
||||
* Copyright (C) 2008 Ronetix Ilko Iliev (www.ronetix.at)
|
||||
* Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/sizes.h>
|
||||
#include <asm/arch/at91sam9263.h>
|
||||
#include <asm/arch/at91sam9263_matrix.h>
|
||||
#include <asm/arch/at91sam9_smc.h>
|
||||
#include <asm/arch/at91_common.h>
|
||||
#include <asm/arch/at91_pmc.h>
|
||||
#include <asm/arch/at91_rstc.h>
|
||||
#include <asm/arch/clk.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
#include <asm/arch/io.h>
|
||||
#include <asm/arch/hardware.h>
|
||||
#include <lcd.h>
|
||||
#include <atmel_lcdc.h>
|
||||
#include <dataflash.h>
|
||||
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
|
||||
#include <net.h>
|
||||
#endif
|
||||
#include <netdev.h>
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
/* ------------------------------------------------------------------------- */
|
||||
/*
|
||||
* Miscelaneous platform dependent initialisations
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
static void pm9263_nand_hw_init(void)
|
||||
{
|
||||
unsigned long csa;
|
||||
|
||||
/* Enable CS3 */
|
||||
csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
|
||||
at91_sys_write(AT91_MATRIX_EBI0CSA,
|
||||
csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
|
||||
|
||||
/* Configure SMC CS3 for NAND/SmartMedia */
|
||||
at91_sys_write(AT91_SMC_SETUP(3),
|
||||
AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(1) |
|
||||
AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(1));
|
||||
at91_sys_write(AT91_SMC_PULSE(3),
|
||||
AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
|
||||
AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
|
||||
at91_sys_write(AT91_SMC_CYCLE(3),
|
||||
AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
|
||||
at91_sys_write(AT91_SMC_MODE(3),
|
||||
AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
|
||||
AT91_SMC_EXNWMODE_DISABLE |
|
||||
#ifdef CONFIG_SYS_NAND_DBW_16
|
||||
AT91_SMC_DBW_16 |
|
||||
#else /* CONFIG_SYS_NAND_DBW_8 */
|
||||
AT91_SMC_DBW_8 |
|
||||
#endif
|
||||
AT91_SMC_TDF_(2));
|
||||
|
||||
/* Configure RDY/BSY */
|
||||
at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
|
||||
|
||||
/* Enable NandFlash */
|
||||
at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MACB
|
||||
static void pm9263_macb_hw_init(void)
|
||||
{
|
||||
/*
|
||||
* PB27 enables the 50MHz oscillator for Ethernet PHY
|
||||
* 1 - enable
|
||||
* 0 - disable
|
||||
*/
|
||||
at91_set_gpio_output(AT91_PIN_PB27, 1);
|
||||
at91_set_gpio_value(AT91_PIN_PB27, 1); /* 1- enable, 0 - disable */
|
||||
|
||||
/* Enable clock */
|
||||
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_EMAC);
|
||||
|
||||
/*
|
||||
* Disable pull-up on:
|
||||
* RXDV (PC25) => PHY normal mode (not Test mode)
|
||||
* ERX0 (PE25) => PHY ADDR0
|
||||
* ERX1 (PE26) => PHY ADDR1 => PHYADDR = 0x0
|
||||
*
|
||||
* PHY has internal pull-down
|
||||
*/
|
||||
writel(pin_to_mask(AT91_PIN_PC25),
|
||||
pin_to_controller(AT91_PIN_PC0) + PIO_PUDR);
|
||||
writel(pin_to_mask(AT91_PIN_PE25) |
|
||||
pin_to_mask(AT91_PIN_PE26),
|
||||
pin_to_controller(AT91_PIN_PE0) + PIO_PUDR);
|
||||
|
||||
|
||||
/* Re-enable pull-up */
|
||||
writel(pin_to_mask(AT91_PIN_PC25),
|
||||
pin_to_controller(AT91_PIN_PC0) + PIO_PUER);
|
||||
writel(pin_to_mask(AT91_PIN_PE25) |
|
||||
pin_to_mask(AT91_PIN_PE26),
|
||||
pin_to_controller(AT91_PIN_PE0) + PIO_PUER);
|
||||
|
||||
at91_macb_hw_init();
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_LCD
|
||||
vidinfo_t panel_info = {
|
||||
vl_col: 240,
|
||||
vl_row: 320,
|
||||
vl_clk: 4965000,
|
||||
vl_sync: ATMEL_LCDC_INVLINE_INVERTED |
|
||||
ATMEL_LCDC_INVFRAME_INVERTED,
|
||||
vl_bpix: 3,
|
||||
vl_tft: 1,
|
||||
vl_hsync_len: 5,
|
||||
vl_left_margin: 1,
|
||||
vl_right_margin:33,
|
||||
vl_vsync_len: 1,
|
||||
vl_upper_margin:1,
|
||||
vl_lower_margin:0,
|
||||
mmio: AT91SAM9263_LCDC_BASE,
|
||||
};
|
||||
|
||||
void lcd_enable(void)
|
||||
{
|
||||
at91_set_gpio_value(AT91_PIN_PA22, 1); /* power up */
|
||||
}
|
||||
|
||||
void lcd_disable(void)
|
||||
{
|
||||
at91_set_gpio_value(AT91_PIN_PA22, 0); /* power down */
|
||||
}
|
||||
|
||||
#ifdef CONFIG_LCD_IN_PSRAM
|
||||
|
||||
#define PSRAM_CRE_PIN AT91_PIN_PB29
|
||||
#define PSRAM_CTRL_REG (PHYS_PSRAM + PHYS_PSRAM_SIZE - 2)
|
||||
|
||||
/* Initialize the PSRAM memory */
|
||||
static int pm9263_lcd_hw_psram_init(void)
|
||||
{
|
||||
volatile uint16_t x;
|
||||
|
||||
/* setup PB29 as output */
|
||||
at91_set_gpio_output(PSRAM_CRE_PIN, 1);
|
||||
|
||||
at91_set_gpio_value(PSRAM_CRE_PIN, 0); /* set PSRAM_CRE_PIN to '0' */
|
||||
|
||||
/* PSRAM: write BCR */
|
||||
x = readw(PSRAM_CTRL_REG);
|
||||
x = readw(PSRAM_CTRL_REG);
|
||||
writew(1, PSRAM_CTRL_REG); /* 0 - RCR,1 - BCR */
|
||||
writew(0x9d4f, PSRAM_CTRL_REG); /* write the BCR */
|
||||
|
||||
/* write RCR of the PSRAM */
|
||||
x = readw(PSRAM_CTRL_REG);
|
||||
x = readw(PSRAM_CTRL_REG);
|
||||
writew(0, PSRAM_CTRL_REG); /* 0 - RCR,1 - BCR */
|
||||
/* set RCR; 0x10-async mode,0x90-page mode */
|
||||
writew(0x90, PSRAM_CTRL_REG);
|
||||
|
||||
/*
|
||||
* test to see if the PSRAM is MT45W2M16A or MT45W2M16B
|
||||
* MT45W2M16B - CRE must be 0
|
||||
* MT45W2M16A - CRE must be 1
|
||||
*/
|
||||
writew(0x1234, PHYS_PSRAM);
|
||||
writew(0x5678, PHYS_PSRAM + 2);
|
||||
|
||||
/* test if the chip is MT45W2M16B */
|
||||
if ((readw(PHYS_PSRAM) != 0x1234) || (readw(PHYS_PSRAM+2) != 0x5678)) {
|
||||
/* try with CRE=1 (MT45W2M16A) */
|
||||
at91_set_gpio_value(PSRAM_CRE_PIN, 1); /* set PSRAM_CRE_PIN to '1' */
|
||||
|
||||
/* write RCR of the PSRAM */
|
||||
x = readw(PSRAM_CTRL_REG);
|
||||
x = readw(PSRAM_CTRL_REG);
|
||||
writew(0, PSRAM_CTRL_REG); /* 0 - RCR,1 - BCR */
|
||||
/* set RCR;0x10-async mode,0x90-page mode */
|
||||
writew(0x90, PSRAM_CTRL_REG);
|
||||
|
||||
|
||||
writew(0x1234, PHYS_PSRAM);
|
||||
writew(0x5678, PHYS_PSRAM+2);
|
||||
if ((readw(PHYS_PSRAM) != 0x1234)
|
||||
|| (readw(PHYS_PSRAM + 2) != 0x5678))
|
||||
return 1;
|
||||
|
||||
}
|
||||
|
||||
/* Bus matrix */
|
||||
at91_sys_write( AT91_MATRIX_PRAS5, AT91_MATRIX_M5PR );
|
||||
at91_sys_write( AT91_MATRIX_SCFG5, AT91_MATRIX_ARBT_FIXED_PRIORITY |
|
||||
(AT91_MATRIX_FIXED_DEFMSTR & (5 << 18)) |
|
||||
AT91_MATRIX_DEFMSTR_TYPE_FIXED |
|
||||
(AT91_MATRIX_SLOT_CYCLE & (0x80 << 0)));
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
static void pm9263_lcd_hw_init(void)
|
||||
{
|
||||
at91_set_A_periph(AT91_PIN_PC0, 0); /* LCDVSYNC */
|
||||
at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
|
||||
at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
|
||||
at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
|
||||
at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
|
||||
at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
|
||||
at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
|
||||
at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
|
||||
at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
|
||||
at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
|
||||
at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
|
||||
at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
|
||||
at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
|
||||
at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
|
||||
at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */
|
||||
at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
|
||||
at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
|
||||
at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
|
||||
at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
|
||||
at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
|
||||
at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */
|
||||
at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
|
||||
at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
|
||||
|
||||
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_LCDC);
|
||||
|
||||
/* Power Control */
|
||||
at91_set_gpio_output(AT91_PIN_PA22, 1);
|
||||
at91_set_gpio_value(AT91_PIN_PA22, 0); /* power down */
|
||||
|
||||
#ifdef CONFIG_LCD_IN_PSRAM
|
||||
/* initialize te PSRAM */
|
||||
int stat = pm9263_lcd_hw_psram_init();
|
||||
|
||||
gd->fb_base = (stat == 0) ? PHYS_PSRAM : AT91SAM9263_SRAM0_BASE;
|
||||
#else
|
||||
gd->fb_base = AT91SAM9263_SRAM0_BASE;
|
||||
#endif
|
||||
|
||||
}
|
||||
|
||||
#ifdef CONFIG_LCD_INFO
|
||||
#include <nand.h>
|
||||
#include <version.h>
|
||||
|
||||
extern flash_info_t flash_info[];
|
||||
|
||||
void lcd_show_board_info(void)
|
||||
{
|
||||
ulong dram_size, nand_size, flash_size, dataflash_size;
|
||||
int i;
|
||||
char temp[32];
|
||||
|
||||
lcd_printf ("%s\n", U_BOOT_VERSION);
|
||||
lcd_printf ("(C) 2009 Ronetix GmbH\n");
|
||||
lcd_printf ("support@ronetix.at\n");
|
||||
lcd_printf ("%s CPU at %s MHz",
|
||||
AT91_CPU_NAME,
|
||||
strmhz(temp, get_cpu_clk_rate()));
|
||||
|
||||
dram_size = 0;
|
||||
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
|
||||
dram_size += gd->bd->bi_dram[i].size;
|
||||
|
||||
nand_size = 0;
|
||||
for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
|
||||
nand_size += nand_info[i].size;
|
||||
|
||||
flash_size = 0;
|
||||
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
|
||||
flash_size += flash_info[i].size;
|
||||
|
||||
dataflash_size = 0;
|
||||
for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++)
|
||||
dataflash_size += (unsigned int) dataflash_info[i].Device.pages_number *
|
||||
dataflash_info[i].Device.pages_size;
|
||||
|
||||
lcd_printf ("%ld MB SDRAM, %ld MB NAND\n%ld MB NOR Flash\n"
|
||||
"4 MB PSRAM, %ld MB DataFlash\n",
|
||||
dram_size >> 20,
|
||||
nand_size >> 20,
|
||||
flash_size >> 20,
|
||||
dataflash_size >> 20);
|
||||
}
|
||||
#endif /* CONFIG_LCD_INFO */
|
||||
|
||||
#endif /* CONFIG_LCD */
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
/* Enable Ctrlc */
|
||||
console_init_f();
|
||||
|
||||
at91_sys_write(AT91_PMC_PCER,
|
||||
(1 << AT91SAM9263_ID_PIOA) |
|
||||
(1 << AT91SAM9263_ID_PIOCDE) |
|
||||
(1 << AT91SAM9263_ID_PIOB));
|
||||
|
||||
/* arch number of AT91SAM9263EK-Board */
|
||||
gd->bd->bi_arch_number = MACH_TYPE_PM9263;
|
||||
|
||||
/* adress of boot parameters */
|
||||
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
|
||||
|
||||
at91_serial_hw_init();
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
pm9263_nand_hw_init();
|
||||
#endif
|
||||
#ifdef CONFIG_HAS_DATAFLASH
|
||||
at91_spi0_hw_init(1 << 0);
|
||||
#endif
|
||||
#ifdef CONFIG_MACB
|
||||
pm9263_macb_hw_init();
|
||||
#endif
|
||||
#ifdef CONFIG_USB_OHCI_NEW
|
||||
at91_uhp_hw_init();
|
||||
#endif
|
||||
#ifdef CONFIG_LCD
|
||||
pm9263_lcd_hw_init();
|
||||
#endif
|
||||
return 0;
|
||||
}
|
||||
|
||||
int dram_init(void)
|
||||
{
|
||||
gd->bd->bi_dram[0].start = PHYS_SDRAM;
|
||||
gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_RESET_PHY_R
|
||||
void reset_phy(void)
|
||||
{
|
||||
#ifdef CONFIG_MACB
|
||||
/*
|
||||
* Initialize ethernet HW addr prior to starting Linux,
|
||||
* needed for nfsroot
|
||||
*/
|
||||
eth_init(gd->bd);
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
|
||||
int board_eth_init(bd_t *bis)
|
||||
{
|
||||
int rc = 0;
|
||||
#ifdef CONFIG_MACB
|
||||
rc = macb_eth_initialize(0, (void *)AT91SAM9263_BASE_EMAC, 0x01);
|
||||
#endif
|
||||
return rc;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_DISPLAY_BOARDINFO
|
||||
int checkboard (void)
|
||||
{
|
||||
char *ss;
|
||||
char buf[32];
|
||||
|
||||
printf ("Board : Ronetix PM9263\n");
|
||||
printf ("Crystal frequency: %8s MHz\n",
|
||||
strmhz(buf, get_main_clk_rate()));
|
||||
printf ("CPU clock : %8s MHz\n",
|
||||
strmhz(buf, get_cpu_clk_rate()));
|
||||
printf ("Master clock : %8s MHz\n",
|
||||
strmhz(buf, get_mck_clk_rate()));
|
||||
|
||||
switch (gd->fb_base) {
|
||||
case PHYS_PSRAM:
|
||||
ss = "(PSRAM)";
|
||||
break;
|
||||
|
||||
case AT91SAM9263_SRAM0_BASE:
|
||||
ss = "(Internal SRAM)";
|
||||
break;
|
||||
|
||||
default:
|
||||
ss = "";
|
||||
break;
|
||||
}
|
||||
printf("Video memory : 0x%08lX %s\n", gd->fb_base, ss );
|
||||
|
||||
printf ("\n");
|
||||
return 0;
|
||||
}
|
||||
#endif
|
|
@ -63,11 +63,14 @@ SOBJS = lowlevel_init.o
|
|||
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
|
||||
|
||||
all: $(obj).depend $(LIB)
|
||||
all: $(obj).depend $(LIB) $(obj)u-boot.lds
|
||||
|
||||
$(LIB): $(OBJS)
|
||||
$(AR) $(ARFLAGS) $@ $(OBJS)
|
||||
|
||||
$(obj)u-boot.lds: u-boot.lds.S
|
||||
$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -DCONFIG_BOARDDIR=$(BOARDDIR) -P $^ > $@
|
||||
|
||||
#########################################################################
|
||||
|
||||
# defines $(obj).depend target
|
||||
|
|
|
@ -1,2 +1,2 @@
|
|||
PLATFORM_CPPFLAGS += $(call cc-option,-mtune=arm926ejs,)
|
||||
LDSCRIPT := $(SRCTREE)/cpu/arm926ejs/at91/u-boot.lds
|
||||
LDSCRIPT := $(OBJTREE)/cpu/arm926ejs/at91/u-boot.lds
|
||||
|
|
|
@ -30,6 +30,8 @@
|
|||
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
||||
|
||||
.globl lowlevel_init
|
||||
.weak lowlevel_init
|
||||
.set lowlevel_init,function
|
||||
lowlevel_init:
|
||||
|
||||
/*
|
||||
|
|
|
@ -21,6 +21,8 @@
|
|||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <config.h>
|
||||
|
||||
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
|
||||
/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
|
||||
OUTPUT_ARCH(arm)
|
||||
|
@ -32,8 +34,11 @@ SECTIONS
|
|||
. = ALIGN(4);
|
||||
.text :
|
||||
{
|
||||
cpu/arm926ejs/start.o (.text)
|
||||
*(.text)
|
||||
cpu/arm926ejs/start.o (.text)
|
||||
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
||||
board/CONFIG_BOARDDIR/lowlevel_init.o (.text)
|
||||
#endif
|
||||
*(.text)
|
||||
}
|
||||
|
||||
. = ALIGN(4);
|
|
@ -106,6 +106,7 @@
|
|||
#define AT91_USART2 AT91SAM9263_BASE_US2
|
||||
|
||||
#define AT91_SMC AT91_SMC0
|
||||
#define AT91_SDRAMC AT91_SDRAMC0
|
||||
|
||||
/*
|
||||
* Internal Memory.
|
||||
|
|
87
include/asm-arm/arch-at91/at91sam9_sdramc.h
Normal file
87
include/asm-arm/arch-at91/at91sam9_sdramc.h
Normal file
|
@ -0,0 +1,87 @@
|
|||
/*
|
||||
* [origin: Linux kernel arch/arm/mach-at91/include/mach/at91_wdt.h]
|
||||
*
|
||||
* Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
|
||||
* Copyright (C) 2007 Andrew Victor
|
||||
* Copyright (C) 2007 Atmel Corporation.
|
||||
*
|
||||
* SDRAM Controllers (SDRAMC) - System peripherals registers.
|
||||
* Based on AT91SAM9261 datasheet revision D.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*/
|
||||
|
||||
#ifndef AT91SAM9_SDRAMC_H
|
||||
#define AT91SAM9_SDRAMC_H
|
||||
|
||||
/* SDRAM Controller (SDRAMC) registers */
|
||||
#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */
|
||||
#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
|
||||
#define AT91_SDRAMC_MODE_NORMAL 0
|
||||
#define AT91_SDRAMC_MODE_NOP 1
|
||||
#define AT91_SDRAMC_MODE_PRECHARGE 2
|
||||
#define AT91_SDRAMC_MODE_LMR 3
|
||||
#define AT91_SDRAMC_MODE_REFRESH 4
|
||||
#define AT91_SDRAMC_MODE_EXT_LMR 5
|
||||
#define AT91_SDRAMC_MODE_DEEP 6
|
||||
|
||||
#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */
|
||||
#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */
|
||||
|
||||
#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */
|
||||
#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
|
||||
#define AT91_SDRAMC_NC_8 (0 << 0)
|
||||
#define AT91_SDRAMC_NC_9 (1 << 0)
|
||||
#define AT91_SDRAMC_NC_10 (2 << 0)
|
||||
#define AT91_SDRAMC_NC_11 (3 << 0)
|
||||
#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
|
||||
#define AT91_SDRAMC_NR_11 (0 << 2)
|
||||
#define AT91_SDRAMC_NR_12 (1 << 2)
|
||||
#define AT91_SDRAMC_NR_13 (2 << 2)
|
||||
#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
|
||||
#define AT91_SDRAMC_NB_2 (0 << 4)
|
||||
#define AT91_SDRAMC_NB_4 (1 << 4)
|
||||
#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
|
||||
#define AT91_SDRAMC_CAS_1 (1 << 5)
|
||||
#define AT91_SDRAMC_CAS_2 (2 << 5)
|
||||
#define AT91_SDRAMC_CAS_3 (3 << 5)
|
||||
#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */
|
||||
#define AT91_SDRAMC_DBW_32 (0 << 7)
|
||||
#define AT91_SDRAMC_DBW_16 (1 << 7)
|
||||
#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */
|
||||
#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */
|
||||
#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */
|
||||
#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */
|
||||
#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */
|
||||
#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */
|
||||
|
||||
#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */
|
||||
#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */
|
||||
#define AT91_SDRAMC_LPCB_DISABLE 0
|
||||
#define AT91_SDRAMC_LPCB_SELF_REFRESH 1
|
||||
#define AT91_SDRAMC_LPCB_POWER_DOWN 2
|
||||
#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3
|
||||
#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */
|
||||
#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
|
||||
#define AT91_SDRAMC_DS (3 << 10) /* Drive Strength */
|
||||
#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
|
||||
#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12)
|
||||
#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12)
|
||||
#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12)
|
||||
|
||||
#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */
|
||||
#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */
|
||||
#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */
|
||||
#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */
|
||||
#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */
|
||||
|
||||
#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */
|
||||
#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */
|
||||
#define AT91_SDRAMC_MD_SDRAM 0
|
||||
#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1
|
||||
|
||||
|
||||
#endif
|
|
@ -48,6 +48,23 @@
|
|||
#error "Unsupported AT91 processor"
|
||||
#endif
|
||||
|
||||
/* External Memory Map */
|
||||
#define AT91_CHIPSELECT_0 0x10000000
|
||||
#define AT91_CHIPSELECT_1 0x20000000
|
||||
#define AT91_CHIPSELECT_2 0x30000000
|
||||
#define AT91_CHIPSELECT_3 0x40000000
|
||||
#define AT91_CHIPSELECT_4 0x50000000
|
||||
#define AT91_CHIPSELECT_5 0x60000000
|
||||
#define AT91_CHIPSELECT_6 0x70000000
|
||||
#define AT91_CHIPSELECT_7 0x80000000
|
||||
|
||||
/* SDRAM */
|
||||
#ifdef CONFIG_DRAM_BASE
|
||||
#define AT91_SDRAM_BASE CONFIG_DRAM_BASE
|
||||
#else
|
||||
#define AT91_SDRAM_BASE AT91_CHIPSELECT_1
|
||||
#endif
|
||||
|
||||
/* Clocks */
|
||||
#define AT91_SLOW_CLOCK 32768 /* slow clock */
|
||||
|
||||
|
|
367
include/configs/pm9263.h
Normal file
367
include/configs/pm9263.h
Normal file
|
@ -0,0 +1,367 @@
|
|||
/*
|
||||
* (C) Copyright 2007-2008
|
||||
* Stelian Pop <stelian.pop@leadtechdesign.com>
|
||||
* Lead Tech Design <www.leadtechdesign.com>
|
||||
* Ilko Iliev <www.ronetix.at>
|
||||
*
|
||||
* Configuation settings for the RONETIX PM9263 board.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/* ARM asynchronous clock */
|
||||
#define AT91_CPU_NAME "AT91SAM9263"
|
||||
|
||||
#define CONFIG_DISPLAY_BOARDINFO
|
||||
|
||||
#define MASTER_PLL_DIV 15
|
||||
#define MASTER_PLL_MUL 162
|
||||
#define MAIN_PLL_DIV 2 /* 2 or 4 */
|
||||
#define AT91_MAIN_CLOCK 18432000
|
||||
|
||||
#define CONFIG_SYS_HZ 1000000
|
||||
|
||||
#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
|
||||
#define CONFIG_AT91SAM9263 1 /* It's an Atmel AT91SAM9263 SoC*/
|
||||
#define CONFIG_PM9263 1 /* on a Ronetix PM9263 Board */
|
||||
#define CONFIG_ARCH_CPU_INIT
|
||||
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
|
||||
|
||||
/* clocks */
|
||||
#define CONFIG_SYS_MOR_VAL 0x00002001 /* CKGR_MOR - enable main osc. */
|
||||
#define CONFIG_SYS_PLLAR_VAL \
|
||||
(0x2000BF00 | ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
|
||||
|
||||
#if (MAIN_PLL_DIV == 2)
|
||||
/* PCK/2 = MCK Master Clock from PLLA */
|
||||
#define CONFIG_SYS_MCKR1_VAL 0x00000100
|
||||
/* PCK/2 = MCK Master Clock from PLLA */
|
||||
#define CONFIG_SYS_MCKR2_VAL 0x00000102
|
||||
#else
|
||||
/* PCK/4 = MCK Master Clock from PLLA */
|
||||
#define CONFIG_SYS_MCKR1_VAL 0x00000200
|
||||
/* PCK/4 = MCK Master Clock from PLLA */
|
||||
#define CONFIG_SYS_MCKR2_VAL 0x00000202
|
||||
#endif
|
||||
/* define PDC[31:16] as DATA[31:16] */
|
||||
#define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000
|
||||
/* no pull-up for D[31:16] */
|
||||
#define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000
|
||||
/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
|
||||
#define CONFIG_SYS_MATRIX_EBI0CSA_VAL 0x0001010A
|
||||
/* EBI1_CSA, 3.3v, no pull-ups */
|
||||
#define CONFIG_SYS_MATRIX_EBI1CSA_VAL 0x00010100
|
||||
|
||||
/* SDRAM */
|
||||
/* SDRAMC_MR Mode register */
|
||||
#define CONFIG_SYS_SDRC_MR_VAL1 0
|
||||
/* SDRAMC_TR - Refresh Timer register */
|
||||
#define CONFIG_SYS_SDRC_TR_VAL1 0x13C
|
||||
#define CONFIG_SYS_SDRC_CR_VAL 0x85227279 /*CL3*/
|
||||
/* Memory Device Register -> SDRAM */
|
||||
#define CONFIG_SYS_SDRC_MDR_VAL 0
|
||||
#define CONFIG_SYS_SDRC_MR_VAL2 0x00000002 /* SDRAMC_MR */
|
||||
#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */
|
||||
#define CONFIG_SYS_SDRC_MR_VAL3 4 /* SDRC_MR */
|
||||
#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */
|
||||
#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */
|
||||
#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */
|
||||
#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */
|
||||
#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */
|
||||
#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */
|
||||
#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */
|
||||
#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */
|
||||
#define CONFIG_SYS_SDRC_MR_VAL4 3 /* SDRC_MR */
|
||||
#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */
|
||||
#define CONFIG_SYS_SDRC_MR_VAL5 0 /* SDRC_MR */
|
||||
#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */
|
||||
#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */
|
||||
#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */
|
||||
|
||||
/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
|
||||
#define CONFIG_SYS_SMC0_SETUP0_VAL 0x0A0A0A0A /* SMC_SETUP */
|
||||
#define CONFIG_SYS_SMC0_PULSE0_VAL 0x0B0B0B0B /* SMC_PULSE */
|
||||
#define CONFIG_SYS_SMC0_CYCLE0_VAL 0x00160016 /* SMC_CYCLE */
|
||||
#define CONFIG_SYS_SMC0_CTRL0_VAL 0x00161003 /* SMC_MODE */
|
||||
|
||||
/* setup SMC1, CS0 (PSRAM) - 16-bit */
|
||||
#define CONFIG_SYS_SMC1_SETUP0_VAL 0x00000000 /* SMC_SETUP */
|
||||
#define CONFIG_SYS_SMC1_PULSE0_VAL 0x07020707 /* SMC_PULSE */
|
||||
#define CONFIG_SYS_SMC1_CYCLE0_VAL 0x00080008 /* SMC_CYCLE */
|
||||
#define CONFIG_SYS_SMC1_CTRL0_VAL 0x31001000 /* SMC_MODE */
|
||||
|
||||
#define CONFIG_SYS_RSTC_RMR_VAL 0xA5000301 /* user reset enable */
|
||||
|
||||
/* Watchdog */
|
||||
#define CONFIG_SYS_WDTC_WDMR_VAL 0x3fff8fff /* disable watchdog */
|
||||
|
||||
/* */
|
||||
|
||||
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
||||
#define CONFIG_SETUP_MEMORY_TAGS 1
|
||||
#define CONFIG_INITRD_TAG 1
|
||||
|
||||
#undef CONFIG_SKIP_LOWLEVEL_INIT
|
||||
#undef CONFIG_SKIP_RELOCATE_UBOOT
|
||||
#define CONFIG_USER_LOWLEVEL_INIT 1
|
||||
|
||||
/*
|
||||
* Hardware drivers
|
||||
*/
|
||||
#define CONFIG_ATMEL_USART 1
|
||||
#undef CONFIG_USART0
|
||||
#undef CONFIG_USART1
|
||||
#undef CONFIG_USART2
|
||||
#define CONFIG_USART3 1 /* USART 3 is DBGU */
|
||||
|
||||
/* LCD */
|
||||
#define CONFIG_LCD 1
|
||||
#define LCD_BPP LCD_COLOR8
|
||||
#define CONFIG_LCD_LOGO 1
|
||||
#undef LCD_TEST_PATTERN
|
||||
#define CONFIG_LCD_INFO 1
|
||||
#define CONFIG_LCD_INFO_BELOW_LOGO 1
|
||||
#define CONFIG_SYS_WHITE_ON_BLACK 1
|
||||
#define CONFIG_ATMEL_LCD 1
|
||||
#define CONFIG_ATMEL_LCD_BGR555 1
|
||||
#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
|
||||
|
||||
#define CONFIG_LCD_IN_PSRAM 1
|
||||
|
||||
/* LED */
|
||||
#define CONFIG_AT91_LED
|
||||
#define CONFIG_RED_LED AT91_PIN_PB7 /* this is the power led */
|
||||
#define CONFIG_GREEN_LED AT91_PIN_PB8 /* this is the user1 led */
|
||||
|
||||
#define CONFIG_BOOTDELAY 3
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE 1
|
||||
#define CONFIG_BOOTP_BOOTPATH 1
|
||||
#define CONFIG_BOOTP_GATEWAY 1
|
||||
#define CONFIG_BOOTP_HOSTNAME 1
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
#undef CONFIG_CMD_BDI
|
||||
#undef CONFIG_CMD_IMI
|
||||
#undef CONFIG_CMD_AUTOSCRIPT
|
||||
#undef CONFIG_CMD_FPGA
|
||||
#undef CONFIG_CMD_LOADS
|
||||
#undef CONFIG_CMD_IMLS
|
||||
|
||||
#define CONFIG_CMD_PING 1
|
||||
#define CONFIG_CMD_DHCP 1
|
||||
#define CONFIG_CMD_NAND 1
|
||||
#define CONFIG_CMD_USB 1
|
||||
|
||||
/* SDRAM */
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
#define PHYS_SDRAM 0x20000000
|
||||
#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
|
||||
|
||||
/* DataFlash */
|
||||
#define CONFIG_ATMEL_DATAFLASH_SPI
|
||||
#define CONFIG_HAS_DATAFLASH 1
|
||||
#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ)
|
||||
#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
|
||||
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
|
||||
#define AT91_SPI_CLK 15000000
|
||||
#define DATAFLASH_TCSS (0x1a << 16)
|
||||
#define DATAFLASH_TCHS (0x1 << 24)
|
||||
|
||||
/* NOR flash, if populated */
|
||||
#define CONFIG_SYS_FLASH_CFI 1
|
||||
#define CONFIG_FLASH_CFI_DRIVER 1
|
||||
#define PHYS_FLASH_1 0x10000000
|
||||
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 256
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
||||
|
||||
/* NAND flash */
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
#define CONFIG_NAND_ATMEL
|
||||
#define CONFIG_SYS_NAND_MAX_CHIPS 1
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
#define CONFIG_SYS_NAND_BASE 0x40000000
|
||||
#define CONFIG_SYS_NAND_DBW_8 1
|
||||
/* our ALE is AD21 */
|
||||
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
|
||||
/* our CLE is AD22 */
|
||||
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
|
||||
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
|
||||
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PB30
|
||||
#endif
|
||||
|
||||
#define CONFIG_CMD_JFFS2 1
|
||||
#define CONFIG_JFFS2_CMDLINE 1
|
||||
#define CONFIG_JFFS2_NAND 1
|
||||
#define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */
|
||||
#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */
|
||||
#define CONFIG_JFFS2_PART_SIZE (256 * 1024 * 1024) /* partition size*/
|
||||
|
||||
/* PSRAM */
|
||||
#define PHYS_PSRAM 0x70000000
|
||||
#define PHYS_PSRAM_SIZE 0x00400000 /* 4MB */
|
||||
|
||||
/* Ethernet */
|
||||
#define CONFIG_MACB 1
|
||||
#define CONFIG_RMII 1
|
||||
#define CONFIG_NET_MULTI 1
|
||||
#define CONFIG_NET_RETRY_COUNT 20
|
||||
#define CONFIG_RESET_PHY_R 1
|
||||
|
||||
/* USB */
|
||||
#define CONFIG_USB_ATMEL
|
||||
#define CONFIG_USB_OHCI_NEW 1
|
||||
#define CONFIG_DOS_PARTITION 1
|
||||
#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
|
||||
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */
|
||||
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
|
||||
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
|
||||
#define CONFIG_USB_STORAGE 1
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
|
||||
#define CONFIG_SYS_MEMTEST_END 0x23e00000
|
||||
|
||||
#define CONFIG_SYS_USE_FLASH 1
|
||||
#undef CONFIG_SYS_USE_DATAFLASH
|
||||
#undef CONFIG_SYS_USE_NANDFLASH
|
||||
|
||||
#ifdef CONFIG_SYS_USE_DATAFLASH
|
||||
|
||||
/* bootstrap + u-boot + env + linux in dataflash on CS0 */
|
||||
#define CONFIG_ENV_IS_IN_DATAFLASH
|
||||
#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
|
||||
#define CONFIG_ENV_OFFSET 0x4200
|
||||
#define CONFIG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
|
||||
#define CONFIG_ENV_SIZE 0x4200
|
||||
#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
|
||||
#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
|
||||
"root=/dev/mtdblock0 " \
|
||||
"mtdparts=at91_nand:-(root) "\
|
||||
"rw rootfstype=jffs2"
|
||||
|
||||
#elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */
|
||||
|
||||
/* bootstrap + u-boot + env + linux in nandflash */
|
||||
#define CONFIG_ENV_IS_IN_NAND
|
||||
#define CONFIG_ENV_OFFSET 0x60000
|
||||
#define CONFIG_ENV_OFFSET_REDUND 0x80000
|
||||
#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
|
||||
#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm"
|
||||
#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
|
||||
"root=/dev/mtdblock5 " \
|
||||
"mtdparts=at91_nand:" \
|
||||
"128k(bootstrap)ro," \
|
||||
"256k(uboot)ro," \
|
||||
"128k(env1)ro," \
|
||||
"128k(env2)ro," \
|
||||
"2M(linux)," \
|
||||
"-(root) " \
|
||||
"rw rootfstype=jffs2"
|
||||
|
||||
#elif defined(CONFIG_SYS_USE_FLASH) /* CFG_USE_FLASH */
|
||||
|
||||
#define CONFIG_ENV_IS_IN_FLASH 1
|
||||
#define CONFIG_ENV_OFFSET 0x40000
|
||||
#define CONFIG_ENV_SECT_SIZE 0x10000
|
||||
#define CONFIG_ENV_SIZE 0x10000
|
||||
#define CONFIG_ENV_OVERWRITE 1
|
||||
|
||||
/* JFFS Partition offset set */
|
||||
#define CONFIG_SYS_JFFS2_FIRST_BANK 0
|
||||
#define CONFIG_SYS_JFFS2_NUM_BANKS 1
|
||||
|
||||
/* 512k reserved for u-boot */
|
||||
#define CONFIG_SYS_JFFS2_FIRST_SECTOR 11
|
||||
|
||||
#define CONFIG_BOOTCOMMAND "run flashboot"
|
||||
#define CONFIG_ROOTPATH /ronetix/rootfs
|
||||
#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n"
|
||||
|
||||
#define CONFIG_CON_ROT "fbcon=rotate:3 "
|
||||
#define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 "\
|
||||
CONFIG_CON_ROT
|
||||
|
||||
#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=nand"
|
||||
#define MTDPARTS_DEFAULT \
|
||||
"mtdparts=physmap-flash.0:" \
|
||||
"256k(u-boot)ro," \
|
||||
"64k(u-boot-env)ro," \
|
||||
"1408k(kernel)," \
|
||||
"-(rootfs);" \
|
||||
"nand:-(nand)"
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"mtdids=" MTDIDS_DEFAULT "\0" \
|
||||
"mtdparts=" MTDPARTS_DEFAULT "\0" \
|
||||
"partition=nand0,0\0" \
|
||||
"ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \
|
||||
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
||||
CONFIG_CON_ROT \
|
||||
"nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \
|
||||
"addip=setenv bootargs $(bootargs) " \
|
||||
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\
|
||||
":$(hostname):eth0:off\0" \
|
||||
"ramboot=tftpboot 0x22000000 vmImage;" \
|
||||
"run ramargs;run addip;bootm 22000000\0" \
|
||||
"nfsboot=tftpboot 0x22000000 vmImage;" \
|
||||
"run nfsargs;run addip;bootm 22000000\0" \
|
||||
"flashboot=run ramargs;run addip;bootm 0x10050000\0" \
|
||||
""
|
||||
|
||||
#else
|
||||
#error "Undefined memory device"
|
||||
#endif
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
|
||||
|
||||
#define CONFIG_SYS_PROMPT "u-boot-pm9263> "
|
||||
#define CONFIG_SYS_CBSIZE 256
|
||||
#define CONFIG_SYS_MAXARGS 16
|
||||
#define CONFIG_SYS_PBSIZE \
|
||||
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
#define CONFIG_SYS_LONGHELP 1
|
||||
#define CONFIG_CMDLINE_EDITING 1
|
||||
|
||||
#define ROUND(A, B) (((A) + (B)) & ~((B) - 1))
|
||||
/*
|
||||
* Size of malloc() pool
|
||||
*/
|
||||
#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
|
||||
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
|
||||
|
||||
#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */
|
||||
|
||||
#ifdef CONFIG_USE_IRQ
|
||||
#error CONFIG_USE_IRQ not supported
|
||||
#endif
|
||||
|
||||
#endif
|
|
@ -122,6 +122,9 @@ endif
|
|||
ifeq ($(VENDOR),atmel)
|
||||
LOGO_BMP= logos/atmel.bmp
|
||||
endif
|
||||
ifeq ($(VENDOR),ronetix)
|
||||
LOGO_BMP= logos/ronetix.bmp
|
||||
endif
|
||||
|
||||
# now $(obj) is defined
|
||||
SRCS += $(addprefix $(SRCTREE)/,$(EXT_OBJ_FILES-y:.o=.c))
|
||||
|
|
BIN
tools/logos/ronetix.bmp
Normal file
BIN
tools/logos/ronetix.bmp
Normal file
Binary file not shown.
After Width: | Height: | Size: 5.5 KiB |
Loading…
Reference in a new issue