usb:udc:samsung:cleanup Replace DEBUG_* macros with debug_cond() calls
This patch cleans up the Samsung's UDC driver. It replaces several DEBUG_* macros with debug_cond(). Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
This commit is contained in:
parent
b9300531c1
commit
f3b05ca533
|
@ -54,19 +54,11 @@
|
|||
|
||||
#define OTG_DMA_MODE 1
|
||||
|
||||
#undef DEBUG_S3C_UDC_SETUP
|
||||
#undef DEBUG_S3C_UDC_EP0
|
||||
#undef DEBUG_S3C_UDC_ISR
|
||||
#undef DEBUG_S3C_UDC_OUT_EP
|
||||
#undef DEBUG_S3C_UDC_IN_EP
|
||||
#undef DEBUG_S3C_UDC
|
||||
|
||||
/* #define DEBUG_S3C_UDC_SETUP */
|
||||
/* #define DEBUG_S3C_UDC_EP0 */
|
||||
/* #define DEBUG_S3C_UDC_ISR */
|
||||
/* #define DEBUG_S3C_UDC_OUT_EP */
|
||||
/* #define DEBUG_S3C_UDC_IN_EP */
|
||||
/* #define DEBUG_S3C_UDC */
|
||||
#define DEBUG_SETUP 0
|
||||
#define DEBUG_EP0 0
|
||||
#define DEBUG_ISR 0
|
||||
#define DEBUG_OUT_EP 0
|
||||
#define DEBUG_IN_EP 0
|
||||
|
||||
#include <usb/s3c_udc.h>
|
||||
|
||||
|
@ -217,7 +209,7 @@ void otg_phy_off(struct s3c_udc *dev)
|
|||
*/
|
||||
static void udc_disable(struct s3c_udc *dev)
|
||||
{
|
||||
DEBUG_SETUP("%s: %p\n", __func__, dev);
|
||||
debug_cond(DEBUG_SETUP != 0, "%s: %p\n", __func__, dev);
|
||||
|
||||
udc_set_address(dev, 0);
|
||||
|
||||
|
@ -235,7 +227,7 @@ static void udc_reinit(struct s3c_udc *dev)
|
|||
{
|
||||
unsigned int i;
|
||||
|
||||
DEBUG_SETUP("%s: %p\n", __func__, dev);
|
||||
debug_cond(DEBUG_SETUP != 0, "%s: %p\n", __func__, dev);
|
||||
|
||||
/* device/ep0 records init */
|
||||
INIT_LIST_HEAD(&dev->gadget.ep_list);
|
||||
|
@ -266,12 +258,13 @@ static void udc_reinit(struct s3c_udc *dev)
|
|||
*/
|
||||
static int udc_enable(struct s3c_udc *dev)
|
||||
{
|
||||
DEBUG_SETUP("%s: %p\n", __func__, dev);
|
||||
debug_cond(DEBUG_SETUP != 0, "%s: %p\n", __func__, dev);
|
||||
|
||||
otg_phy_init(dev);
|
||||
reconfig_usbd();
|
||||
|
||||
DEBUG_SETUP("S3C USB 2.0 OTG Controller Core Initialized : 0x%x\n",
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"S3C USB 2.0 OTG Controller Core Initialized : 0x%x\n",
|
||||
readl(®->gintmsk));
|
||||
|
||||
dev->gadget.speed = USB_SPEED_UNKNOWN;
|
||||
|
@ -288,7 +281,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
|
|||
int retval = 0;
|
||||
unsigned long flags;
|
||||
|
||||
DEBUG_SETUP("%s: %s\n", __func__, "no name");
|
||||
debug_cond(DEBUG_SETUP != 0, "%s: %s\n", __func__, "no name");
|
||||
|
||||
if (!driver
|
||||
|| (driver->speed != USB_SPEED_FULL
|
||||
|
@ -312,7 +305,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
|
|||
|
||||
retval = driver->bind(&dev->gadget);
|
||||
if (retval) {
|
||||
DEBUG_SETUP("%s: bind to driver --> error %d\n",
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"%s: bind to driver --> error %d\n",
|
||||
dev->gadget.name, retval);
|
||||
dev->driver = 0;
|
||||
return retval;
|
||||
|
@ -320,7 +314,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
|
|||
|
||||
enable_irq(IRQ_OTG);
|
||||
|
||||
DEBUG_SETUP("Registered gadget driver %s\n", dev->gadget.name);
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"Registered gadget driver %s\n", dev->gadget.name);
|
||||
udc_enable(dev);
|
||||
|
||||
return 0;
|
||||
|
@ -378,7 +373,7 @@ static void done(struct s3c_ep *ep, struct s3c_request *req, int status)
|
|||
/* don't modify queue heads during completion callback */
|
||||
ep->stopped = 1;
|
||||
|
||||
#ifdef DEBUG_S3C_UDC
|
||||
#ifdef DEBUG
|
||||
printf("calling complete callback\n");
|
||||
{
|
||||
int i, len = req->req.length;
|
||||
|
|
|
@ -53,7 +53,7 @@ static inline void s3c_udc_ep0_zlp(struct s3c_udc *dev)
|
|||
writel(ep_ctrl|DEPCTL_EPENA|DEPCTL_CNAK,
|
||||
®->in_endp[EP0_CON].diepctl);
|
||||
|
||||
DEBUG_EP0("%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
|
||||
debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
|
||||
__func__, readl(®->in_endp[EP0_CON].diepctl));
|
||||
dev->ep0state = WAIT_FOR_IN_COMPLETE;
|
||||
}
|
||||
|
@ -62,7 +62,8 @@ void s3c_udc_pre_setup(void)
|
|||
{
|
||||
u32 ep_ctrl;
|
||||
|
||||
debug_cond(DEBUG_IN_EP, "%s : Prepare Setup packets.\n", __func__);
|
||||
debug_cond(DEBUG_IN_EP,
|
||||
"%s : Prepare Setup packets.\n", __func__);
|
||||
|
||||
invalidate_dcache_range((unsigned long) usb_ctrl_dma_addr,
|
||||
(unsigned long) usb_ctrl_dma_addr
|
||||
|
@ -75,9 +76,9 @@ void s3c_udc_pre_setup(void)
|
|||
ep_ctrl = readl(®->out_endp[EP0_CON].doepctl);
|
||||
writel(ep_ctrl|DEPCTL_EPENA, ®->out_endp[EP0_CON].doepctl);
|
||||
|
||||
DEBUG_EP0("%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
|
||||
debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
|
||||
__func__, readl(®->in_endp[EP0_CON].diepctl));
|
||||
DEBUG_EP0("%s:EP0 ZLP DOEPCTL0 = 0x%x\n",
|
||||
debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DOEPCTL0 = 0x%x\n",
|
||||
__func__, readl(®->out_endp[EP0_CON].doepctl));
|
||||
|
||||
}
|
||||
|
@ -86,9 +87,9 @@ static inline void s3c_ep0_complete_out(void)
|
|||
{
|
||||
u32 ep_ctrl;
|
||||
|
||||
DEBUG_EP0("%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
|
||||
debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
|
||||
__func__, readl(®->in_endp[EP0_CON].diepctl));
|
||||
DEBUG_EP0("%s:EP0 ZLP DOEPCTL0 = 0x%x\n",
|
||||
debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DOEPCTL0 = 0x%x\n",
|
||||
__func__, readl(®->out_endp[EP0_CON].doepctl));
|
||||
|
||||
debug_cond(DEBUG_IN_EP,
|
||||
|
@ -106,9 +107,9 @@ static inline void s3c_ep0_complete_out(void)
|
|||
writel(ep_ctrl|DEPCTL_EPENA|DEPCTL_CNAK,
|
||||
®->out_endp[EP0_CON].doepctl);
|
||||
|
||||
DEBUG_EP0("%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
|
||||
debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DIEPCTL0 = 0x%x\n",
|
||||
__func__, readl(®->in_endp[EP0_CON].diepctl));
|
||||
DEBUG_EP0("%s:EP0 ZLP DOEPCTL0 = 0x%x\n",
|
||||
debug_cond(DEBUG_EP0 != 0, "%s:EP0 ZLP DOEPCTL0 = 0x%x\n",
|
||||
__func__, readl(®->out_endp[EP0_CON].doepctl));
|
||||
|
||||
}
|
||||
|
@ -145,7 +146,8 @@ static int setdma_rx(struct s3c_ep *ep, struct s3c_request *req)
|
|||
®->out_endp[ep_num].doeptsiz);
|
||||
writel(DEPCTL_EPENA|DEPCTL_CNAK|ctrl, ®->out_endp[ep_num].doepctl);
|
||||
|
||||
DEBUG_OUT_EP("%s: EP%d RX DMA start : DOEPDMA = 0x%x,"
|
||||
debug_cond(DEBUG_OUT_EP != 0,
|
||||
"%s: EP%d RX DMA start : DOEPDMA = 0x%x,"
|
||||
"DOEPTSIZ = 0x%x, DOEPCTL = 0x%x\n"
|
||||
"\tbuf = 0x%p, pktcnt = %d, xfersize = %d\n",
|
||||
__func__, ep_num,
|
||||
|
@ -225,7 +227,8 @@ static void complete_rx(struct s3c_udc *dev, u8 ep_num)
|
|||
u32 *p = the_controller->dma_buf[ep_index(ep)+1];
|
||||
|
||||
if (list_empty(&ep->queue)) {
|
||||
DEBUG_OUT_EP("%s: RX DMA done : NULL REQ on OUT EP-%d\n",
|
||||
debug_cond(DEBUG_OUT_EP != 0,
|
||||
"%s: RX DMA done : NULL REQ on OUT EP-%d\n",
|
||||
__func__, ep_num);
|
||||
return;
|
||||
|
||||
|
@ -249,14 +252,15 @@ static void complete_rx(struct s3c_udc *dev, u8 ep_num)
|
|||
req->req.actual += min(xfer_size, req->req.length - req->req.actual);
|
||||
is_short = (xfer_size < ep->ep.maxpacket);
|
||||
|
||||
DEBUG_OUT_EP("%s: RX DMA done : ep = %d, rx bytes = %d/%d, "
|
||||
debug_cond(DEBUG_OUT_EP != 0,
|
||||
"%s: RX DMA done : ep = %d, rx bytes = %d/%d, "
|
||||
"is_short = %d, DOEPTSIZ = 0x%x, remained bytes = %d\n",
|
||||
__func__, ep_num, req->req.actual, req->req.length,
|
||||
is_short, ep_tsr, xfer_size);
|
||||
|
||||
if (is_short || req->req.actual == req->req.length) {
|
||||
if (ep_num == EP0_CON && dev->ep0state == DATA_STATE_RECV) {
|
||||
DEBUG_OUT_EP(" => Send ZLP\n");
|
||||
debug_cond(DEBUG_OUT_EP != 0, " => Send ZLP\n");
|
||||
s3c_udc_ep0_zlp(dev);
|
||||
/* packet will be completed in complete_tx() */
|
||||
dev->ep0state = WAIT_FOR_IN_COMPLETE;
|
||||
|
@ -266,7 +270,8 @@ static void complete_rx(struct s3c_udc *dev, u8 ep_num)
|
|||
if (!list_empty(&ep->queue)) {
|
||||
req = list_entry(ep->queue.next,
|
||||
struct s3c_request, queue);
|
||||
DEBUG_OUT_EP("%s: Next Rx request start...\n",
|
||||
debug_cond(DEBUG_OUT_EP != 0,
|
||||
"%s: Next Rx request start...\n",
|
||||
__func__);
|
||||
setdma_rx(ep, req);
|
||||
}
|
||||
|
@ -392,7 +397,8 @@ static void process_ep_in_intr(struct s3c_udc *dev)
|
|||
while (ep_intr) {
|
||||
if (ep_intr & DAINT_IN_EP_INT(1)) {
|
||||
ep_intr_status = readl(®->in_endp[ep_num].diepint);
|
||||
debug_cond(DEBUG_IN_EP, "\tEP%d-IN : DIEPINT = 0x%x\n",
|
||||
debug_cond(DEBUG_IN_EP,
|
||||
"\tEP%d-IN : DIEPINT = 0x%x\n",
|
||||
ep_num, ep_intr_status);
|
||||
|
||||
/* Interrupt Clear */
|
||||
|
@ -430,7 +436,8 @@ static void process_ep_out_intr(struct s3c_udc *dev)
|
|||
u8 ep_num = 0;
|
||||
|
||||
ep_intr = readl(®->daint);
|
||||
DEBUG_OUT_EP("*** %s: EP OUT interrupt : DAINT = 0x%x\n",
|
||||
debug_cond(DEBUG_OUT_EP != 0,
|
||||
"*** %s: EP OUT interrupt : DAINT = 0x%x\n",
|
||||
__func__, ep_intr);
|
||||
|
||||
ep_intr = (ep_intr >> DAINT_OUT_BIT) & DAINT_MASK;
|
||||
|
@ -438,7 +445,8 @@ static void process_ep_out_intr(struct s3c_udc *dev)
|
|||
while (ep_intr) {
|
||||
if (ep_intr & 0x1) {
|
||||
ep_intr_status = readl(®->out_endp[ep_num].doepint);
|
||||
DEBUG_OUT_EP("\tEP%d-OUT : DOEPINT = 0x%x\n",
|
||||
debug_cond(DEBUG_OUT_EP != 0,
|
||||
"\tEP%d-OUT : DOEPINT = 0x%x\n",
|
||||
ep_num, ep_intr_status);
|
||||
|
||||
/* Interrupt Clear */
|
||||
|
@ -457,7 +465,8 @@ static void process_ep_out_intr(struct s3c_udc *dev)
|
|||
|
||||
if (ep_intr_status &
|
||||
CTRL_OUT_EP_SETUP_PHASE_DONE) {
|
||||
DEBUG_OUT_EP("SETUP packet arrived\n");
|
||||
debug_cond(DEBUG_OUT_EP != 0,
|
||||
"SETUP packet arrived\n");
|
||||
s3c_handle_ep0(dev);
|
||||
}
|
||||
} else {
|
||||
|
@ -503,7 +512,8 @@ static int s3c_udc_irq(int irq, void *_dev)
|
|||
usb_status = (readl(®->dsts) & 0x6);
|
||||
|
||||
if (usb_status & (USB_FULL_30_60MHZ | USB_FULL_48MHZ)) {
|
||||
debug_cond(DEBUG_ISR, "\t\tFull Speed Detection\n");
|
||||
debug_cond(DEBUG_ISR,
|
||||
"\t\tFull Speed Detection\n");
|
||||
set_max_pktsize(dev, USB_SPEED_FULL);
|
||||
|
||||
} else {
|
||||
|
@ -571,7 +581,8 @@ static int s3c_udc_irq(int irq, void *_dev)
|
|||
|
||||
} else {
|
||||
reset_available = 1;
|
||||
debug_cond(DEBUG_ISR, "\t\tRESET handling skipped\n");
|
||||
debug_cond(DEBUG_ISR,
|
||||
"\t\tRESET handling skipped\n");
|
||||
}
|
||||
}
|
||||
|
||||
|
@ -635,7 +646,7 @@ static int s3c_queue(struct usb_ep *_ep, struct usb_request *_req,
|
|||
_req, _req->length, _req->buf,
|
||||
list_empty(&ep->queue), ep->stopped);
|
||||
|
||||
#ifdef DEBUG_S3C_UDC
|
||||
#ifdef DEBUG
|
||||
{
|
||||
int i, len = _req->length;
|
||||
|
||||
|
@ -668,7 +679,8 @@ static int s3c_queue(struct usb_ep *_ep, struct usb_request *_req,
|
|||
setdma_tx(ep, req);
|
||||
} else {
|
||||
gintsts = readl(®->gintsts);
|
||||
DEBUG_OUT_EP("%s:ep_is_out, S3C_UDC_OTG_GINTSTS=0x%x\n",
|
||||
debug_cond(DEBUG_OUT_EP != 0,
|
||||
"%s:ep_is_out, S3C_UDC_OTG_GINTSTS=0x%x\n",
|
||||
__func__, gintsts);
|
||||
|
||||
setdma_rx(ep, req);
|
||||
|
@ -697,7 +709,7 @@ static int write_fifo_ep0(struct s3c_ep *ep, struct s3c_request *req)
|
|||
|
||||
max = ep_maxpacket(ep);
|
||||
|
||||
DEBUG_EP0("%s: max = %d\n", __func__, max);
|
||||
debug_cond(DEBUG_EP0 != 0, "%s: max = %d\n", __func__, max);
|
||||
|
||||
count = setdma_tx(ep, req);
|
||||
|
||||
|
@ -712,7 +724,8 @@ static int write_fifo_ep0(struct s3c_ep *ep, struct s3c_request *req)
|
|||
is_last = 1;
|
||||
}
|
||||
|
||||
DEBUG_EP0("%s: wrote %s %d bytes%s %d left %p\n", __func__,
|
||||
debug_cond(DEBUG_EP0 != 0,
|
||||
"%s: wrote %s %d bytes%s %d left %p\n", __func__,
|
||||
ep->ep.name, count,
|
||||
is_last ? "/L" : "",
|
||||
req->req.length - req->req.actual - count, req);
|
||||
|
@ -736,7 +749,8 @@ int s3c_fifo_read(struct s3c_ep *ep, u32 *cp, int max)
|
|||
(unsigned long) ep->dev->dma_buf[ep_index(ep)]
|
||||
+ DMA_BUFFER_SIZE);
|
||||
|
||||
DEBUG_EP0("%s: bytes=%d, ep_index=%d %p\n", __func__,
|
||||
debug_cond(DEBUG_EP0 != 0,
|
||||
"%s: bytes=%d, ep_index=%d %p\n", __func__,
|
||||
bytes, ep_index(ep), ep->dev->dma_buf[ep_index(ep)]);
|
||||
|
||||
return bytes;
|
||||
|
@ -756,7 +770,8 @@ static void udc_set_address(struct s3c_udc *dev, unsigned char address)
|
|||
|
||||
s3c_udc_ep0_zlp(dev);
|
||||
|
||||
DEBUG_EP0("%s: USB OTG 2.0 Device address=%d, DCFG=0x%x\n",
|
||||
debug_cond(DEBUG_EP0 != 0,
|
||||
"%s: USB OTG 2.0 Device address=%d, DCFG=0x%x\n",
|
||||
__func__, address, readl(®->dcfg));
|
||||
|
||||
dev->usb_address = address;
|
||||
|
@ -778,7 +793,8 @@ static inline void s3c_udc_ep0_set_stall(struct s3c_ep *ep)
|
|||
|
||||
writel(ep_ctrl, ®->in_endp[EP0_CON].diepctl);
|
||||
|
||||
DEBUG_EP0("%s: set ep%d stall, DIEPCTL0 = 0x%x\n",
|
||||
debug_cond(DEBUG_EP0 != 0,
|
||||
"%s: set ep%d stall, DIEPCTL0 = 0x%p\n",
|
||||
__func__, ep_index(ep), ®->in_endp[EP0_CON].diepctl);
|
||||
/*
|
||||
* The application can only set this bit, and the core clears it,
|
||||
|
@ -803,7 +819,8 @@ static void s3c_ep0_read(struct s3c_udc *dev)
|
|||
return;
|
||||
}
|
||||
|
||||
DEBUG_EP0("%s: req = %p, req.length = 0x%x, req.actual = 0x%x\n",
|
||||
debug_cond(DEBUG_EP0 != 0,
|
||||
"%s: req = %p, req.length = 0x%x, req.actual = 0x%x\n",
|
||||
__func__, req, req->req.length, req->req.actual);
|
||||
|
||||
if (req->req.length == 0) {
|
||||
|
@ -813,7 +830,8 @@ static void s3c_ep0_read(struct s3c_udc *dev)
|
|||
ep->len = 0;
|
||||
s3c_udc_ep0_zlp(dev);
|
||||
|
||||
DEBUG_EP0("%s: req.length = 0, bRequest = %d\n",
|
||||
debug_cond(DEBUG_EP0 != 0,
|
||||
"%s: req.length = 0, bRequest = %d\n",
|
||||
__func__, usb_ctrl->bRequest);
|
||||
return;
|
||||
}
|
||||
|
@ -836,11 +854,12 @@ static int s3c_ep0_write(struct s3c_udc *dev)
|
|||
req = list_entry(ep->queue.next, struct s3c_request, queue);
|
||||
|
||||
if (!req) {
|
||||
DEBUG_EP0("%s: NULL REQ\n", __func__);
|
||||
debug_cond(DEBUG_EP0 != 0, "%s: NULL REQ\n", __func__);
|
||||
return 0;
|
||||
}
|
||||
|
||||
DEBUG_EP0("%s: req = %p, req.length = 0x%x, req.actual = 0x%x\n",
|
||||
debug_cond(DEBUG_EP0 != 0,
|
||||
"%s: req = %p, req.length = 0x%x, req.actual = 0x%x\n",
|
||||
__func__, req, req->req.length, req->req.actual);
|
||||
|
||||
if (req->req.length - req->req.actual == ep0_fifo_size) {
|
||||
|
@ -854,11 +873,13 @@ static int s3c_ep0_write(struct s3c_udc *dev)
|
|||
if ((ret == 1) && !need_zlp) {
|
||||
/* Last packet */
|
||||
dev->ep0state = WAIT_FOR_COMPLETE;
|
||||
DEBUG_EP0("%s: finished, waiting for status\n", __func__);
|
||||
debug_cond(DEBUG_EP0 != 0,
|
||||
"%s: finished, waiting for status\n", __func__);
|
||||
|
||||
} else {
|
||||
dev->ep0state = DATA_STATE_XMIT;
|
||||
DEBUG_EP0("%s: not finished\n", __func__);
|
||||
debug_cond(DEBUG_EP0 != 0,
|
||||
"%s: not finished\n", __func__);
|
||||
}
|
||||
|
||||
return 1;
|
||||
|
@ -873,29 +894,34 @@ int s3c_udc_get_status(struct s3c_udc *dev,
|
|||
u32 ep_ctrl;
|
||||
u32 *p = the_controller->dma_buf[1];
|
||||
|
||||
DEBUG_SETUP("%s: *** USB_REQ_GET_STATUS\n", __func__);
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"%s: *** USB_REQ_GET_STATUS\n", __func__);
|
||||
printf("crq->brequest:0x%x\n", crq->bRequestType & USB_RECIP_MASK);
|
||||
switch (crq->bRequestType & USB_RECIP_MASK) {
|
||||
case USB_RECIP_INTERFACE:
|
||||
g_status = 0;
|
||||
DEBUG_SETUP("\tGET_STATUS:USB_RECIP_INTERFACE, g_stauts = %d\n",
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"\tGET_STATUS:USB_RECIP_INTERFACE, g_stauts = %d\n",
|
||||
g_status);
|
||||
break;
|
||||
|
||||
case USB_RECIP_DEVICE:
|
||||
g_status = 0x1; /* Self powered */
|
||||
DEBUG_SETUP("\tGET_STATUS: USB_RECIP_DEVICE, g_stauts = %d\n",
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"\tGET_STATUS: USB_RECIP_DEVICE, g_stauts = %d\n",
|
||||
g_status);
|
||||
break;
|
||||
|
||||
case USB_RECIP_ENDPOINT:
|
||||
if (crq->wLength > 2) {
|
||||
DEBUG_SETUP("\tGET_STATUS:Not support EP or wLength\n");
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"\tGET_STATUS:Not support EP or wLength\n");
|
||||
return 1;
|
||||
}
|
||||
|
||||
g_status = dev->ep[ep_num].stopped;
|
||||
DEBUG_SETUP("\tGET_STATUS: USB_RECIP_ENDPOINT, g_stauts = %d\n",
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"\tGET_STATUS: USB_RECIP_ENDPOINT, g_stauts = %d\n",
|
||||
g_status);
|
||||
|
||||
break;
|
||||
|
@ -1134,11 +1160,13 @@ static int s3c_udc_clear_feature(struct usb_ep *_ep)
|
|||
ep_num = ep_index(ep);
|
||||
|
||||
dev = ep->dev;
|
||||
DEBUG_SETUP("%s: ep_num = %d, is_in = %d, clear_feature_flag = %d\n",
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"%s: ep_num = %d, is_in = %d, clear_feature_flag = %d\n",
|
||||
__func__, ep_num, ep_is_in(ep), clear_feature_flag);
|
||||
|
||||
if (usb_ctrl->wLength != 0) {
|
||||
DEBUG_SETUP("\tCLEAR_FEATURE: wLength is not zero.....\n");
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"\tCLEAR_FEATURE: wLength is not zero.....\n");
|
||||
return 1;
|
||||
}
|
||||
|
||||
|
@ -1146,11 +1174,13 @@ static int s3c_udc_clear_feature(struct usb_ep *_ep)
|
|||
case USB_RECIP_DEVICE:
|
||||
switch (usb_ctrl->wValue) {
|
||||
case USB_DEVICE_REMOTE_WAKEUP:
|
||||
DEBUG_SETUP("\tOFF:USB_DEVICE_REMOTE_WAKEUP\n");
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"\tOFF:USB_DEVICE_REMOTE_WAKEUP\n");
|
||||
break;
|
||||
|
||||
case USB_DEVICE_TEST_MODE:
|
||||
DEBUG_SETUP("\tCLEAR_FEATURE: USB_DEVICE_TEST_MODE\n");
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"\tCLEAR_FEATURE: USB_DEVICE_TEST_MODE\n");
|
||||
/** @todo Add CLEAR_FEATURE for TEST modes. */
|
||||
break;
|
||||
}
|
||||
|
@ -1159,7 +1189,8 @@ static int s3c_udc_clear_feature(struct usb_ep *_ep)
|
|||
break;
|
||||
|
||||
case USB_RECIP_ENDPOINT:
|
||||
DEBUG_SETUP("\tCLEAR_FEATURE:USB_RECIP_ENDPOINT, wValue = %d\n",
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"\tCLEAR_FEATURE:USB_RECIP_ENDPOINT, wValue = %d\n",
|
||||
usb_ctrl->wValue);
|
||||
|
||||
if (usb_ctrl->wValue == USB_ENDPOINT_HALT) {
|
||||
|
@ -1193,11 +1224,13 @@ static int s3c_udc_set_feature(struct usb_ep *_ep)
|
|||
ep_num = ep_index(ep);
|
||||
dev = ep->dev;
|
||||
|
||||
DEBUG_SETUP("%s: *** USB_REQ_SET_FEATURE , ep_num = %d\n",
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"%s: *** USB_REQ_SET_FEATURE , ep_num = %d\n",
|
||||
__func__, ep_num);
|
||||
|
||||
if (usb_ctrl->wLength != 0) {
|
||||
DEBUG_SETUP("\tSET_FEATURE: wLength is not zero.....\n");
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"\tSET_FEATURE: wLength is not zero.....\n");
|
||||
return 1;
|
||||
}
|
||||
|
||||
|
@ -1205,20 +1238,24 @@ static int s3c_udc_set_feature(struct usb_ep *_ep)
|
|||
case USB_RECIP_DEVICE:
|
||||
switch (usb_ctrl->wValue) {
|
||||
case USB_DEVICE_REMOTE_WAKEUP:
|
||||
DEBUG_SETUP("\tSET_FEATURE:USB_DEVICE_REMOTE_WAKEUP\n");
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"\tSET_FEATURE:USB_DEVICE_REMOTE_WAKEUP\n");
|
||||
break;
|
||||
case USB_DEVICE_B_HNP_ENABLE:
|
||||
DEBUG_SETUP("\tSET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n");
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"\tSET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n");
|
||||
break;
|
||||
|
||||
case USB_DEVICE_A_HNP_SUPPORT:
|
||||
/* RH port supports HNP */
|
||||
DEBUG_SETUP("\tSET_FEATURE:USB_DEVICE_A_HNP_SUPPORT\n");
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"\tSET_FEATURE:USB_DEVICE_A_HNP_SUPPORT\n");
|
||||
break;
|
||||
|
||||
case USB_DEVICE_A_ALT_HNP_SUPPORT:
|
||||
/* other RH port does */
|
||||
DEBUG_SETUP("\tSET: USB_DEVICE_A_ALT_HNP_SUPPORT\n");
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"\tSET: USB_DEVICE_A_ALT_HNP_SUPPORT\n");
|
||||
break;
|
||||
}
|
||||
|
||||
|
@ -1226,11 +1263,13 @@ static int s3c_udc_set_feature(struct usb_ep *_ep)
|
|||
return 0;
|
||||
|
||||
case USB_RECIP_INTERFACE:
|
||||
DEBUG_SETUP("\tSET_FEATURE: USB_RECIP_INTERFACE\n");
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"\tSET_FEATURE: USB_RECIP_INTERFACE\n");
|
||||
break;
|
||||
|
||||
case USB_RECIP_ENDPOINT:
|
||||
DEBUG_SETUP("\tSET_FEATURE: USB_RECIP_ENDPOINT\n");
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"\tSET_FEATURE: USB_RECIP_ENDPOINT\n");
|
||||
if (usb_ctrl->wValue == USB_ENDPOINT_HALT) {
|
||||
if (ep_num == 0) {
|
||||
s3c_udc_ep0_set_stall(ep);
|
||||
|
@ -1262,14 +1301,15 @@ void s3c_ep0_setup(struct s3c_udc *dev)
|
|||
/* read control req from fifo (8 bytes) */
|
||||
s3c_fifo_read(ep, (u32 *)usb_ctrl, 8);
|
||||
|
||||
DEBUG_SETUP("%s: bRequestType = 0x%x(%s), bRequest = 0x%x"
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"%s: bRequestType = 0x%x(%s), bRequest = 0x%x"
|
||||
"\twLength = 0x%x, wValue = 0x%x, wIndex= 0x%x\n",
|
||||
__func__, usb_ctrl->bRequestType,
|
||||
(usb_ctrl->bRequestType & USB_DIR_IN) ? "IN" : "OUT",
|
||||
usb_ctrl->bRequest,
|
||||
usb_ctrl->wLength, usb_ctrl->wValue, usb_ctrl->wIndex);
|
||||
|
||||
#ifdef DEBUG_S3C_UDC
|
||||
#ifdef DEBUG
|
||||
{
|
||||
int i, len = sizeof(*usb_ctrl);
|
||||
char *p = (char *)usb_ctrl;
|
||||
|
@ -1286,9 +1326,11 @@ void s3c_ep0_setup(struct s3c_udc *dev)
|
|||
|
||||
if (usb_ctrl->bRequest == GET_MAX_LUN_REQUEST &&
|
||||
usb_ctrl->wLength != 1) {
|
||||
DEBUG_SETUP("\t%s:GET_MAX_LUN_REQUEST:invalid",
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"\t%s:GET_MAX_LUN_REQUEST:invalid",
|
||||
__func__);
|
||||
DEBUG_SETUP("wLength = %d, setup returned\n",
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"wLength = %d, setup returned\n",
|
||||
usb_ctrl->wLength);
|
||||
|
||||
s3c_udc_ep0_set_stall(ep);
|
||||
|
@ -1298,7 +1340,8 @@ void s3c_ep0_setup(struct s3c_udc *dev)
|
|||
} else if (usb_ctrl->bRequest == BOT_RESET_REQUEST &&
|
||||
usb_ctrl->wLength != 0) {
|
||||
/* Bulk-Only *mass storge reset of class-specific request */
|
||||
DEBUG_SETUP("%s:BOT Rest:invalid wLength =%d, setup returned\n",
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"%s:BOT Rest:invalid wLength =%d, setup returned\n",
|
||||
__func__, usb_ctrl->wLength);
|
||||
|
||||
s3c_udc_ep0_set_stall(ep);
|
||||
|
@ -1323,7 +1366,8 @@ void s3c_ep0_setup(struct s3c_udc *dev)
|
|||
if (dev->req_std) {
|
||||
switch (usb_ctrl->bRequest) {
|
||||
case USB_REQ_SET_ADDRESS:
|
||||
DEBUG_SETUP("%s: *** USB_REQ_SET_ADDRESS (%d)\n",
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"%s: *** USB_REQ_SET_ADDRESS (%d)\n",
|
||||
__func__, usb_ctrl->wValue);
|
||||
if (usb_ctrl->bRequestType
|
||||
!= (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
|
||||
|
@ -1333,8 +1377,10 @@ void s3c_ep0_setup(struct s3c_udc *dev)
|
|||
return;
|
||||
|
||||
case USB_REQ_SET_CONFIGURATION:
|
||||
DEBUG_SETUP("=====================================\n");
|
||||
DEBUG_SETUP("%s: USB_REQ_SET_CONFIGURATION (%d)\n",
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"=====================================\n");
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"%s: USB_REQ_SET_CONFIGURATION (%d)\n",
|
||||
__func__, usb_ctrl->wValue);
|
||||
|
||||
if (usb_ctrl->bRequestType == USB_RECIP_DEVICE)
|
||||
|
@ -1343,12 +1389,14 @@ void s3c_ep0_setup(struct s3c_udc *dev)
|
|||
break;
|
||||
|
||||
case USB_REQ_GET_DESCRIPTOR:
|
||||
DEBUG_SETUP("%s: *** USB_REQ_GET_DESCRIPTOR\n",
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"%s: *** USB_REQ_GET_DESCRIPTOR\n",
|
||||
__func__);
|
||||
break;
|
||||
|
||||
case USB_REQ_SET_INTERFACE:
|
||||
DEBUG_SETUP("%s: *** USB_REQ_SET_INTERFACE (%d)\n",
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"%s: *** USB_REQ_SET_INTERFACE (%d)\n",
|
||||
__func__, usb_ctrl->wValue);
|
||||
|
||||
if (usb_ctrl->bRequestType == USB_RECIP_INTERFACE)
|
||||
|
@ -1357,7 +1405,8 @@ void s3c_ep0_setup(struct s3c_udc *dev)
|
|||
break;
|
||||
|
||||
case USB_REQ_GET_CONFIGURATION:
|
||||
DEBUG_SETUP("%s: *** USB_REQ_GET_CONFIGURATION\n",
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"%s: *** USB_REQ_GET_CONFIGURATION\n",
|
||||
__func__);
|
||||
break;
|
||||
|
||||
|
@ -1384,7 +1433,8 @@ void s3c_ep0_setup(struct s3c_udc *dev)
|
|||
break;
|
||||
|
||||
default:
|
||||
DEBUG_SETUP("%s: *** Default of usb_ctrl->bRequest=0x%x"
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"%s: *** Default of usb_ctrl->bRequest=0x%x"
|
||||
"happened.\n", __func__, usb_ctrl->bRequest);
|
||||
break;
|
||||
}
|
||||
|
@ -1394,7 +1444,8 @@ void s3c_ep0_setup(struct s3c_udc *dev)
|
|||
if (likely(dev->driver)) {
|
||||
/* device-2-host (IN) or no data setup command,
|
||||
* process immediately */
|
||||
DEBUG_SETUP("%s:usb_ctrlreq will be passed to fsg_setup()\n",
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"%s:usb_ctrlreq will be passed to fsg_setup()\n",
|
||||
__func__);
|
||||
|
||||
spin_unlock(&dev->lock);
|
||||
|
@ -1406,17 +1457,20 @@ void s3c_ep0_setup(struct s3c_udc *dev)
|
|||
s3c_udc_ep0_set_stall(ep);
|
||||
dev->ep0state = WAIT_FOR_SETUP;
|
||||
|
||||
DEBUG_SETUP("\tdev->driver->setup failed (%d),"
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"\tdev->driver->setup failed (%d),"
|
||||
" bRequest = %d\n",
|
||||
i, usb_ctrl->bRequest);
|
||||
|
||||
|
||||
} else if (dev->req_pending) {
|
||||
dev->req_pending = 0;
|
||||
DEBUG_SETUP("\tdev->req_pending...\n");
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"\tdev->req_pending...\n");
|
||||
}
|
||||
|
||||
DEBUG_SETUP("\tep0state = %s\n", state_names[dev->ep0state]);
|
||||
debug_cond(DEBUG_SETUP != 0,
|
||||
"\tep0state = %s\n", state_names[dev->ep0state]);
|
||||
|
||||
}
|
||||
}
|
||||
|
@ -1427,18 +1481,21 @@ void s3c_ep0_setup(struct s3c_udc *dev)
|
|||
static void s3c_handle_ep0(struct s3c_udc *dev)
|
||||
{
|
||||
if (dev->ep0state == WAIT_FOR_SETUP) {
|
||||
DEBUG_OUT_EP("%s: WAIT_FOR_SETUP\n", __func__);
|
||||
debug_cond(DEBUG_OUT_EP != 0,
|
||||
"%s: WAIT_FOR_SETUP\n", __func__);
|
||||
s3c_ep0_setup(dev);
|
||||
|
||||
} else {
|
||||
DEBUG_OUT_EP("%s: strange state!!(state = %s)\n",
|
||||
debug_cond(DEBUG_OUT_EP != 0,
|
||||
"%s: strange state!!(state = %s)\n",
|
||||
__func__, state_names[dev->ep0state]);
|
||||
}
|
||||
}
|
||||
|
||||
static void s3c_ep0_kick(struct s3c_udc *dev, struct s3c_ep *ep)
|
||||
{
|
||||
DEBUG_EP0("%s: ep_is_in = %d\n", __func__, ep_is_in(ep));
|
||||
debug_cond(DEBUG_EP0 != 0,
|
||||
"%s: ep_is_in = %d\n", __func__, ep_is_in(ep));
|
||||
if (ep_is_in(ep)) {
|
||||
dev->ep0state = DATA_STATE_XMIT;
|
||||
s3c_ep0_write(dev);
|
||||
|
|
|
@ -112,54 +112,6 @@ extern struct s3c_udc *the_controller;
|
|||
#define ep_index(EP) ((EP)->bEndpointAddress&0xF)
|
||||
#define ep_maxpacket(EP) ((EP)->ep.maxpacket)
|
||||
|
||||
/*-------------------------------------------------------------------------*/
|
||||
/* #define DEBUG_UDC */
|
||||
#ifdef DEBUG_UDC
|
||||
#define DBG(stuff...) printf("udc: " stuff)
|
||||
#else
|
||||
#define DBG(stuff...) do {} while (0)
|
||||
#endif
|
||||
|
||||
#ifdef DEBUG_S3C_UDC_SETUP
|
||||
#define DEBUG_SETUP(fmt, args...) printk(fmt, ##args)
|
||||
#else
|
||||
#define DEBUG_SETUP(fmt, args...) do {} while (0)
|
||||
#endif
|
||||
|
||||
#ifdef DEBUG_S3C_UDC_EP0
|
||||
#define DEBUG_EP0(fmt, args...) printk(fmt, ##args)
|
||||
#else
|
||||
#define DEBUG_EP0(fmt, args...) do {} while (0)
|
||||
#endif
|
||||
|
||||
#ifdef DEBUG_S3C_UDC_ISR
|
||||
#define DEBUG_ISR 1
|
||||
#else
|
||||
#define DEBUG_ISR 0
|
||||
#endif
|
||||
|
||||
#ifdef DEBUG_S3C_UDC_OUT_EP
|
||||
#define DEBUG_OUT_EP(fmt, args...) printk(fmt, ##args)
|
||||
#else
|
||||
#define DEBUG_OUT_EP(fmt, args...) do {} while (0)
|
||||
#endif
|
||||
|
||||
#ifdef DEBUG_S3C_UDC_IN_EP
|
||||
#define DEBUG_IN_EP 1
|
||||
#else
|
||||
#define DEBUG_IN_EP 0
|
||||
#endif
|
||||
|
||||
#if defined(DEBUG_S3C_UDC_SETUP) || defined(DEBUG_S3C_UDC_EP0) || \
|
||||
defined(DEBUG_S3C_UDC_ISR) || defined(DEBUG_S3C_UDC_OUT_EP) || \
|
||||
defined(DEBUG_S3C_UDC_IN_EP) || defined(DEBUG_S3C_UDC)
|
||||
#define DEBUG
|
||||
#endif
|
||||
|
||||
#define ERR(stuff...) printf("ERR udc: " stuff)
|
||||
#define WARN(stuff...) printf("WARNING udc: " stuff)
|
||||
#define INFO(stuff...) printf("INFO udc: " stuff)
|
||||
|
||||
extern void otg_phy_init(struct s3c_udc *dev);
|
||||
extern void otg_phy_off(struct s3c_udc *dev);
|
||||
|
||||
|
|
Loading…
Reference in a new issue