..
uImage.FIT
net ppc: fix ethernet device names with spaces
2010-08-09 11:52:28 -07:00
feature-removal-schedule.txt
Drop support for CONFIG_SYS_ARM_WITHOUT_RELOC
2010-10-29 21:39:59 +02:00
I2C_Edge_Conditions
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
mkimage.1
Escape minus signs in manpage
2011-01-19 00:07:51 +01:00
README-integrator
arm: Move cpu/$CPU to arch/arm/cpu/$CPU
2010-04-13 09:13:24 +02:00
README.440-DDR-performance
README.alaska8220
Move arch/ppc to arch/powerpc
2010-04-21 23:42:38 +02:00
README.AMCC-eval-boards-cleanup
README.amigaone
README.arm-caches
arm: do not force d-cache enable on all boards
2011-09-04 11:36:16 +02:00
README.ARM-memory-map
Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE
2010-10-18 22:07:10 +02:00
README.arm-relocation
Minor coding style cleanup.
2011-05-19 22:22:44 +02:00
README.ARM-SoC
arm: Move cpu/$CPU to arch/arm/cpu/$CPU
2010-04-13 09:13:24 +02:00
README.at91
at91: Introduction of at91sam9g10 SOC.
2009-07-12 17:56:11 +02:00
README.at91-soc
README.at91-soc: remove AT91(RM9200) joining notice
2011-08-03 13:00:55 +02:00
README.atmel_mci
Prepare v2010.09-rc1
2010-09-10 00:16:19 +02:00
README.autoboot
Fix printf() format problems with configurable prompts
2008-07-31 17:08:27 +02:00
README.AVR32
avr32: Update README
2008-09-01 13:41:58 +02:00
README.AVR32-port-muxing
avr32: refactor the portmux/gpio code
2008-09-01 14:20:41 +02:00
README.bamboo
ppc4xx: Update AMCC Bamboo README doc/README.bamboo
2007-08-06 21:10:17 +02:00
README.bedbug
Move arch/ppc to arch/powerpc
2010-04-21 23:42:38 +02:00
README.bitbangMII
Coding Style cleanup; update CHANGELOG, prepare -rc1
2009-10-28 00:49:47 +01:00
README.blackfin
add some more Blackfin docs
2008-02-04 19:26:54 -05:00
README.bus_vcxk
Prepare 2009.08-rc1
2009-07-27 00:24:55 +02:00
README.cfi
mpc5200, digsy_mtc: add support for rev5 board version
2011-01-18 23:34:26 +01:00
README.cmi
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
README.COBRA5272
Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE
2010-10-18 22:07:10 +02:00
README.commands
README.commands.itest
README.console
Big white-space cleanup.
2008-05-21 00:14:08 +02:00
README.davinci
DA850 EVM: passing maximum clock rate information to kernel
2010-11-19 16:29:11 -05:00
README.db64360
README.db64460
README.designware_eth
SPEAr : Network driver support added
2010-07-12 00:08:05 -07:00
README.dnp5370
Blackfin: dnp5370: new board port
2011-04-08 00:44:26 -04:00
README.dns
Coding Style cleanup; update CHANGELOG.
2009-07-23 22:23:23 +02:00
README.drivers.eth
Program net device MAC addresses after initializing
2010-05-03 14:52:49 -07:00
README.ebony
i2c: Update references to individual i2c commands
2009-06-12 20:39:46 +02:00
README.enetaddr
Program net device MAC addresses after initializing
2010-05-03 14:52:49 -07:00
README.EVB-64260-750CX
README.evb64260
README.fads
README.fsl-ddr
Minor Coding Style Cleanup.
2011-02-02 22:36:10 +01:00
README.fsl-hwconfig
powerpc/85xx: Specify hwconfig usage for USB controller
2011-07-11 13:24:20 -05:00
README.generic_usb_ohci
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
README.hawkboard
Add board support for hawkboard
2010-11-30 11:25:01 -05:00
README.hwconfig
doc: add README for CONFIG_HWCONFIG option
2010-03-12 00:09:25 +01:00
README.IceCube
README.idma2intr
README.imx5
ARM: MX51: PLL errata workaround
2011-09-04 11:36:11 +02:00
README.imx31
move README.imx31 to doc/ and merge with README.mx31
2008-10-08 18:59:04 +02:00
README.imximage
imximage: Add MX53 boot image support
2011-02-02 00:54:42 +01:00
README.INCA-IP
README.iomux
IOMUX: Add console multiplexing support.
2008-12-07 01:23:35 +01:00
README.IPHASE4539
Move arch/ppc to arch/powerpc
2010-04-21 23:42:38 +02:00
README.JFFS2
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
README.JFFS2_NAND
Fix "par[t]ition" typo.
2010-05-21 22:05:05 +02:00
README.kmeter1
net: rename "FSL UECx" net interfaces "UECx"
2010-08-09 11:52:29 -07:00
README.korat
Makefile: move all Power Architecture boards into boards.cfg
2010-10-18 22:12:04 +02:00
README.kwbimage
Coding Style cleanup; update CHANGELOG, prepare -rc1
2009-10-28 00:49:47 +01:00
README.LED
Move lib_$ARCH directories to arch/$ARCH/lib
2010-04-13 09:13:03 +02:00
README.LED_display
led_display: remove unused DISPLAY_MARK define
2010-10-21 22:25:04 +02:00
README.Lite5200B_low_power
README.lynxkdi
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
README.m68k
cleanup: Fix typos and misspellings in various files.
2011-07-28 21:27:36 +02:00
README.m5253evbe
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
README.m5373evb
Convert ISO-8859 files to UTF-8
2011-08-04 23:34:02 +02:00
README.m5475evb
m68k: Move cpu/$CPU to arch/m68k/cpu/$CPU
2010-04-13 09:13:24 +02:00
README.m52277evb
m68k: Move cpu/$CPU to arch/m68k/cpu/$CPU
2010-04-13 09:13:24 +02:00
README.m53017evb
m68k: Move cpu/$CPU to arch/m68k/cpu/$CPU
2010-04-13 09:13:24 +02:00
README.m54455evb
m68k: Move cpu/$CPU to arch/m68k/cpu/$CPU
2010-04-13 09:13:24 +02:00
README.marubun-pcmcia
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
README.MBX
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
README.mergerbox
mpc83xx: Add support for MergerBox board
2011-07-06 19:09:27 -05:00
README.mflash
mflash: Initial mflash support
2009-04-03 23:47:06 +02:00
README.mips
doc/README.mips: Add MIPS notes
2008-04-25 00:03:53 +02:00
README.Modem
README.modnet50
arm: Move cpu/$CPU to arch/arm/cpu/$CPU
2010-04-13 09:13:24 +02:00
README.mpc5xx
Move arch/ppc to arch/powerpc
2010-04-21 23:42:38 +02:00
README.mpc74xx
README.mpc83xx.ddrecc
mpc83xx: Correct the README for DDR ECC
2007-08-10 01:13:11 -05:00
README.mpc83xxads
README.mpc85xxads
85xx boards: Rename CONFIG_DDR_DLL to CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN
2011-01-14 01:32:19 -06:00
README.mpc85xxcds
README.mpc832xemds
83xx: Replace CONFIG_MPC83[0-9]X with MPC83[0-9]x
2009-06-12 20:47:17 +02:00
README.mpc837xemds
83xx: Replace CONFIG_MPC83[0-9]X with MPC83[0-9]x
2009-06-12 20:47:17 +02:00
README.mpc837xerdb
83xx: Replace CONFIG_MPC83[0-9]X with MPC83[0-9]x
2009-06-12 20:47:17 +02:00
README.MPC866
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
README.mpc7448hpc2
Convert ISO-8859 files to UTF-8
2011-08-04 23:34:02 +02:00
README.mpc8313erdb
mpc8313erdb: Document NAND boot.
2008-10-29 14:35:56 -05:00
README.mpc8315erdb
mpc83xx: Add NAND boot support for MPC8315E-RDB boards
2010-01-07 18:33:52 -06:00
README.mpc8323erdb
mpc83xx: add support for the MPC8323E RDB
2007-08-10 01:12:25 -05:00
README.mpc8349itx
83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx
2009-06-12 20:47:17 +02:00
README.mpc8360emds
83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx
2009-06-12 20:47:17 +02:00
README.mpc8536ds
Fix MPC8536DS documentation
2010-03-12 00:15:55 +01:00
README.mpc8544ds
Coding style cleanup, update CHANGELOG
2007-08-14 09:54:46 +02:00
README.mpc8569mds
Prepare v2009.06
2009-06-14 21:30:39 +02:00
README.mpc8572ds
Coding style cleanup; update CHANGELOG
2009-02-12 00:08:39 +01:00
README.mpc8610hpcd
8610HPCD: Document the flashbank selection switches.
2008-02-20 15:26:51 -06:00
README.mpc8641hpcn
mpc8641: Fix error in README
2008-12-01 10:28:52 -06:00
README.mvbc_p
Prepare v1.3.4-rc1: Code cleanup, update CHANGELOG, sort Makefile
2008-07-15 22:22:44 +02:00
README.mvblm7
Coding Style Cleanup
2008-06-28 23:34:37 +02:00
README.mvsmr
Add initial support for Matrix Vision mvSMR board based on MPC5200B.
2010-04-10 00:06:05 +02:00
README.mx35pdk
Add support for Freescale's mx35pdk board.
2011-02-02 00:54:43 +01:00
README.nand
cmd_nand: add nand write.trimffs command
2011-07-01 15:56:51 -05:00
README.nand-boot-ppc440
Fix some typos
2008-05-09 20:53:52 +02:00
README.ne2000
README.NetConsole
tools/netconsole: use ncb automatically if available
2009-09-15 22:55:45 +02:00
README.nhk8815
arm nomadik: allow Nand and OneNand to coexists
2009-07-06 21:53:06 +02:00
README.ns9750dev
README.ocotea
README.ocotea-PIBS-to-U-Boot
README.OFT
README.omap3
OMAP3: add CM-T35 board
2011-02-02 00:54:43 +01:00
README.omap730p2
README.OXC
README.p1022ds
Minor coding style cleanup.
2011-05-19 22:22:44 +02:00
README.p1023rds
powerpc/85xx: Add basic support for P1023RDS board
2011-07-11 13:24:20 -05:00
README.p2020rdb
85xx: Add support for P2020RDB board
2009-08-28 17:12:38 -05:00
README.p2041rdb
powerpc/p2041rdb: Add p2041rdb board support
2011-07-17 11:03:36 -05:00
README.p4080ds
p4080ds: add README.p4080ds which documents the "serdes" hwconfig option
2011-04-10 11:17:32 -05:00
README.phytec.pcm030
Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE
2010-10-18 22:07:10 +02:00
README.PIP405
Move arch/ppc to arch/powerpc
2010-04-21 23:42:38 +02:00
README.PlanetCore
README.POST
post/i2c: Add ability to ignore I2C devices
2010-10-22 02:19:14 -05:00
README.ppc440
Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature
2010-09-23 09:02:05 +02:00
README.PXA_CF
ide: add configuration
2010-08-08 05:17:05 +05:30
README.qemu_mips
cleanup: Fix typos and misspellings in various files.
2011-07-28 21:27:36 +02:00
README.RPXClassic
Convert ISO-8859 files to UTF-8
2011-08-04 23:34:02 +02:00
README.RPXlite
Move arch/ppc to arch/powerpc
2010-04-21 23:42:38 +02:00
README.s5pc1xx
s5pc1xx: update the README file
2010-04-03 15:24:26 -05:00
README.Sandpoint8240
README.sata
doc: english polishing for README.sata
2008-04-13 14:56:51 -07:00
README.sbc8349
mpc83xx: sbc8349 - make enabling PCI more user friendly
2009-08-21 17:09:21 -05:00
README.sbc8548
sbc8548: reclaim wasted sector in boot flash
2009-09-30 08:29:47 -05:00
README.SBC8560
README.sbc8641d
Add support for SBC8641D. Config files.
2007-08-10 14:50:05 -05:00
README.sched
README.scrapyard
ARM: remove broken "lart" board.
2011-09-07 21:46:40 +02:00
README.serial_multi
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
README.sh
sh: Add support Renesas Solutions R7780MP
2008-03-28 14:16:12 +09:00
README.sh7757lcr
Coding Style cleanup: remove trailing empty lines
2011-03-27 21:48:08 +02:00
README.sh7785lcr
sh: Add support 32-Bit Extended Address Mode to sh7785lcr
2009-03-12 23:58:30 +09:00
README.sha1
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
README.silent
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
README.simpc8313
mpc83xx: New board support for SIMPC8313
2009-01-23 11:31:18 -06:00
README.SNTP
Update README.* to reference new CONFIG_CMD_* names now.
2007-07-09 19:10:03 -05:00
README.spear
SPEAr : Adding README.spear in doc
2010-01-23 08:15:49 -06:00
README.SPL
spl: add initial support for a generic SPL framework
2011-07-26 14:42:12 +02:00
README.standalone
Make sure that argv[] argument pointers are not modified.
2010-07-04 23:55:42 +02:00
README.stxxtc
README.timll
Add support for the DevKit8000 board
2009-09-05 01:33:14 +02:00
README.TQM8260
Move arch/ppc to arch/powerpc
2010-04-21 23:42:38 +02:00
README.ubi
Add UBI README
2010-10-19 23:53:45 +02:00
README.ublimage
mkimage: add UBL header support for booting davinci cpus
2011-07-28 16:52:41 +02:00
README.update
add command fitupd to run an update from a FIT image
2011-07-26 16:58:48 +02:00
README.usb
Add documentation for USB Host Networking
2011-08-08 21:05:23 +02:00
README.video
video: parse the video-mode environment variable
2011-04-28 21:31:02 +02:00
README.VLAN
README.xpedite1k
i2c: Update references to individual i2c commands
2009-06-12 20:39:46 +02:00
README.zeus
ppc4xx: Add initial Zeus (PPC405EP) board support
2007-08-14 14:44:41 +02:00