1
0
Fork 0
remarkable-uboot/board/varisys/cyrus
Tom Rini da58dec866 Various Makefiles: Add SPDX-License-Identifier tags
After consulting with some of the SPDX team, the conclusion is that
Makefiles are worth adding SPDX-License-Identifier tags too, and most of
ours have one.  This adds tags to ones that lack them and converts a few
that had full (or in one case, very partial) license blobs into the
equivalent tag.

Cc: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-11-10 09:19:52 -05:00
..
Kconfig mpc85xx: Add support for the Varisys Cyrus board 2015-11-04 15:19:34 -08:00
MAINTAINERS mpc85xx: Add support for the Varisys Cyrus board 2015-11-04 15:19:34 -08:00
Makefile Various Makefiles: Add SPDX-License-Identifier tags 2015-11-10 09:19:52 -05:00
README mpc85xx: Add support for the Varisys Cyrus board 2015-11-04 15:19:34 -08:00
cyrus.c mpc85xx: Add support for the Varisys Cyrus board 2015-11-04 15:19:34 -08:00
cyrus.h mpc85xx: Add support for the Varisys Cyrus board 2015-11-04 15:19:34 -08:00
ddr.c mpc85xx: Add support for the Varisys Cyrus board 2015-11-04 15:19:34 -08:00
eth.c mpc85xx: Add support for the Varisys Cyrus board 2015-11-04 15:19:34 -08:00
law.c mpc85xx: Add support for the Varisys Cyrus board 2015-11-04 15:19:34 -08:00
pbi.cfg mpc85xx: Add support for the Varisys Cyrus board 2015-11-04 15:19:34 -08:00
pci.c mpc85xx: Add support for the Varisys Cyrus board 2015-11-04 15:19:34 -08:00
rcw_p5020_v2.cfg mpc85xx: Add support for the Varisys Cyrus board 2015-11-04 15:19:34 -08:00
rcw_p5040.cfg mpc85xx: Add support for the Varisys Cyrus board 2015-11-04 15:19:34 -08:00
tlb.c mpc85xx: Add support for the Varisys Cyrus board 2015-11-04 15:19:34 -08:00

README

Rebuilding u-boot for Cyrus

The Cyrus defconfigs are Cyrus_P5020_defconfig and Cyrus_P5040_defconfig.

They currently disable size optimization in order to avoid a relocation
bug in some versions of GCC. As the output size is a constant, the size
optimization is not currently important.

Cyrus boots off a microSD card in a slot on the motherboard. This requires
that the u-boot is built for the Pre-Boot Loader on the P5020/P5040.
In order to reflash u-boot, you must download u-boot.pbl, then write it
onto the card. To do that from u-boot:

> tftp 1000000 u-boot.pbl
> mmc write 1000000 8 672

If you want to do this via a card reader in linux:

> dd if=u-boot.pbl of=/dev/sdX bs=512 oseek=8