remarkable-uboot

redonkable

History

Fabio Estevam dbab8b8e10 mx6cuboxi: Fix boot of hummingboard dual-lite Hummingboard dual-lite is picking the incorrect calibration structure. Fix it so that it can boot. While at it, also fix p1_mpdgctrl1 register to match Solid-run's setting. Reported-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Andrei Gherzan <andrei@gherzan.ro>		2015-06-15 12:12:59 +02:00
..
Kconfig	mx6: Add initial SPL support for HummingBoard-i2eX	2015-04-22 14:39:06 +02:00
MAINTAINERS	mx6cuboxi: Fix the defconfig name	2015-04-27 13:13:57 +02:00
Makefile	mx6: Add initial SPL support for HummingBoard-i2eX	2015-04-22 14:39:06 +02:00
README	mx6cuboxi: Mention Cubox-i in the README	2015-05-15 19:21:23 +02:00
mx6cuboxi.c	mx6cuboxi: Fix boot of hummingboard dual-lite	2015-06-15 12:12:59 +02:00

README

How to use U-boot on Solid-run mx6 Hummingboard and Cubox-i
-----------------------------------------------------------

- Build U-boot for Hummingboard/Cubox-i:

$ make mrproper
$ make mx6cuboxi_defconfig
$ make

This will generate the SPL image called SPL and the u-boot.img.

- Flash the SPL image into the SD card:

sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync

- Flash the u-boot.img image into the SD card:

sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync

- Insert the SD card in the board, power it up and U-boot messages should
come up.