diff --git a/phonelibs/android_frameworks_native/include/batteryservice/BatteryService.h b/phonelibs/android_frameworks_native/include/batteryservice/BatteryService.h deleted file mode 100644 index 3e6bfb82..00000000 --- a/phonelibs/android_frameworks_native/include/batteryservice/BatteryService.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - * Copyright (C) 2013 The Android Open Source Project - * Copyright (C) 2015 The CyanogenMod Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef ANDROID_BATTERYSERVICE_H -#define ANDROID_BATTERYSERVICE_H - -#include -#include -#include -#include - -namespace android { - -// must be kept in sync with definitions in BatteryManager.java -enum { - BATTERY_STATUS_UNKNOWN = 1, // equals BatteryManager.BATTERY_STATUS_UNKNOWN constant - BATTERY_STATUS_CHARGING = 2, // equals BatteryManager.BATTERY_STATUS_CHARGING constant - BATTERY_STATUS_DISCHARGING = 3, // equals BatteryManager.BATTERY_STATUS_DISCHARGING constant - BATTERY_STATUS_NOT_CHARGING = 4, // equals BatteryManager.BATTERY_STATUS_NOT_CHARGING constant - BATTERY_STATUS_FULL = 5, // equals BatteryManager.BATTERY_STATUS_FULL constant -}; - -// must be kept in sync with definitions in BatteryManager.java -enum { - BATTERY_HEALTH_UNKNOWN = 1, // equals BatteryManager.BATTERY_HEALTH_UNKNOWN constant - BATTERY_HEALTH_GOOD = 2, // equals BatteryManager.BATTERY_HEALTH_GOOD constant - BATTERY_HEALTH_OVERHEAT = 3, // equals BatteryManager.BATTERY_HEALTH_OVERHEAT constant - BATTERY_HEALTH_DEAD = 4, // equals BatteryManager.BATTERY_HEALTH_DEAD constant - BATTERY_HEALTH_OVER_VOLTAGE = 5, // equals BatteryManager.BATTERY_HEALTH_OVER_VOLTAGE constant - BATTERY_HEALTH_UNSPECIFIED_FAILURE = 6, // equals BatteryManager.BATTERY_HEALTH_UNSPECIFIED_FAILURE constant - BATTERY_HEALTH_COLD = 7, // equals BatteryManager.BATTERY_HEALTH_COLD constant -}; - -// must be kept in sync with definitions in BatteryProperty.java -enum { - BATTERY_PROP_CHARGE_COUNTER = 1, // equals BatteryProperty.CHARGE_COUNTER constant - BATTERY_PROP_CURRENT_NOW = 2, // equals BatteryProperty.CURRENT_NOW constant - BATTERY_PROP_CURRENT_AVG = 3, // equals BatteryProperty.CURRENT_AVG constant - BATTERY_PROP_CAPACITY = 4, // equals BatteryProperty.CAPACITY constant - BATTERY_PROP_ENERGY_COUNTER = 5, // equals BatteryProperty.ENERGY_COUNTER constant -}; - -struct BatteryProperties { - bool chargerAcOnline; - bool chargerUsbOnline; - bool chargerWirelessOnline; - int maxChargingCurrent; - int batteryStatus; - int batteryHealth; - bool batteryPresent; - int batteryLevel; - int batteryVoltage; - int batteryTemperature; - String8 batteryTechnology; - - bool dockBatterySupported; - bool chargerDockAcOnline; - int dockBatteryStatus; - int dockBatteryHealth; - bool dockBatteryPresent; - int dockBatteryLevel; - int dockBatteryVoltage; - int dockBatteryTemperature; - String8 dockBatteryTechnology; - - status_t writeToParcel(Parcel* parcel) const; - status_t readFromParcel(Parcel* parcel); -}; - -struct BatteryProperty { - int64_t valueInt64; - - status_t writeToParcel(Parcel* parcel) const; - status_t readFromParcel(Parcel* parcel); -}; - -}; // namespace android - -#endif // ANDROID_BATTERYSERVICE_H diff --git a/phonelibs/android_frameworks_native/include/batteryservice/IBatteryPropertiesListener.h b/phonelibs/android_frameworks_native/include/batteryservice/IBatteryPropertiesListener.h deleted file mode 100644 index b02d8e90..00000000 --- a/phonelibs/android_frameworks_native/include/batteryservice/IBatteryPropertiesListener.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * Copyright (C) 2013 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef ANDROID_IBATTERYPROPERTIESLISTENER_H -#define ANDROID_IBATTERYPROPERTIESLISTENER_H - -#include -#include - -#include - -namespace android { - -// must be kept in sync with interface defined in IBatteryPropertiesListener.aidl -enum { - TRANSACT_BATTERYPROPERTIESCHANGED = IBinder::FIRST_CALL_TRANSACTION, -}; - -// ---------------------------------------------------------------------------- - -class IBatteryPropertiesListener : public IInterface { -public: - DECLARE_META_INTERFACE(BatteryPropertiesListener); - - virtual void batteryPropertiesChanged(struct BatteryProperties props) = 0; -}; - -// ---------------------------------------------------------------------------- - -}; // namespace android - -#endif // ANDROID_IBATTERYPROPERTIESLISTENER_H diff --git a/phonelibs/android_frameworks_native/include/batteryservice/IBatteryPropertiesRegistrar.h b/phonelibs/android_frameworks_native/include/batteryservice/IBatteryPropertiesRegistrar.h deleted file mode 100644 index f6a7981d..00000000 --- a/phonelibs/android_frameworks_native/include/batteryservice/IBatteryPropertiesRegistrar.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright (C) 2013 The Android Open Source Project - * Copyright (C) 2015 The CyanogenMod Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef ANDROID_IBATTERYPROPERTIESREGISTRAR_H -#define ANDROID_IBATTERYPROPERTIESREGISTRAR_H - -#include -#include - -namespace android { - -// must be kept in sync with interface defined in IBatteryPropertiesRegistrar.aidl -enum { - REGISTER_LISTENER = IBinder::FIRST_CALL_TRANSACTION, - UNREGISTER_LISTENER, - GET_PROPERTY, - GET_DOCK_PROPERTY, -}; - -class IBatteryPropertiesRegistrar : public IInterface { -public: - DECLARE_META_INTERFACE(BatteryPropertiesRegistrar); - - virtual void registerListener(const sp& listener) = 0; - virtual void unregisterListener(const sp& listener) = 0; - virtual status_t getProperty(int id, struct BatteryProperty *val) = 0; - virtual status_t getDockProperty(int id, struct BatteryProperty *val) = 0; -}; - -class BnBatteryPropertiesRegistrar : public BnInterface { -public: - virtual status_t onTransact(uint32_t code, const Parcel& data, - Parcel* reply, uint32_t flags = 0); -}; - -}; // namespace android - -#endif // ANDROID_IBATTERYPROPERTIESREGISTRAR_H diff --git a/phonelibs/android_frameworks_native/include/diskusage/dirsize.h b/phonelibs/android_frameworks_native/include/diskusage/dirsize.h deleted file mode 100644 index 34236c0e..00000000 --- a/phonelibs/android_frameworks_native/include/diskusage/dirsize.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * - * Copyright (C) 2010 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef __LIBDISKUSAGE_DIRSIZE_H -#define __LIBDISKUSAGE_DIRSIZE_H - -#include - -__BEGIN_DECLS - -int64_t stat_size(struct stat *s); -int64_t calculate_dir_size(int dfd); - -__END_DECLS - -#endif /* __LIBDISKUSAGE_DIRSIZE_H */ diff --git a/phonelibs/android_frameworks_native/include/input/IInputFlinger.h b/phonelibs/android_frameworks_native/include/input/IInputFlinger.h deleted file mode 100644 index 629310ff..00000000 --- a/phonelibs/android_frameworks_native/include/input/IInputFlinger.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright (C) 2013 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef _LIBINPUT_IINPUT_FLINGER_H -#define _LIBINPUT_IINPUT_FLINGER_H - -#include -#include - -#include - -namespace android { - -/* - * This class defines the Binder IPC interface for accessing various - * InputFlinger features. - */ -class IInputFlinger : public IInterface { -public: - DECLARE_META_INTERFACE(InputFlinger); -}; - - -/** - * Binder implementation. - */ -class BnInputFlinger : public BnInterface { -public: - enum { - DO_SOMETHING_TRANSACTION = IBinder::FIRST_CALL_TRANSACTION, - }; - - virtual status_t onTransact(uint32_t code, const Parcel& data, - Parcel* reply, uint32_t flags = 0); -}; - -} // namespace android - -#endif // _LIBINPUT_IINPUT_FLINGER_H diff --git a/phonelibs/android_frameworks_native/include/input/Input.h b/phonelibs/android_frameworks_native/include/input/Input.h deleted file mode 100644 index 82fc6599..00000000 --- a/phonelibs/android_frameworks_native/include/input/Input.h +++ /dev/null @@ -1,681 +0,0 @@ -/* - * Copyright (C) 2010 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef _LIBINPUT_INPUT_H -#define _LIBINPUT_INPUT_H - -/** - * Native input event structures. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * Additional private constants not defined in ndk/ui/input.h. - */ -enum { - /* Signifies that the key is being predispatched */ - AKEY_EVENT_FLAG_PREDISPATCH = 0x20000000, - - /* Private control to determine when an app is tracking a key sequence. */ - AKEY_EVENT_FLAG_START_TRACKING = 0x40000000, - - /* Key event is inconsistent with previously sent key events. */ - AKEY_EVENT_FLAG_TAINTED = 0x80000000, -}; - -enum { - - /** - * This flag indicates that the window that received this motion event is partly - * or wholly obscured by another visible window above it. This flag is set to true - * even if the event did not directly pass through the obscured area. - * A security sensitive application can check this flag to identify situations in which - * a malicious application may have covered up part of its content for the purpose - * of misleading the user or hijacking touches. An appropriate response might be - * to drop the suspect touches or to take additional precautions to confirm the user's - * actual intent. - */ - AMOTION_EVENT_FLAG_WINDOW_IS_PARTIALLY_OBSCURED = 0x2, - - /* Motion event is inconsistent with previously sent motion events. */ - AMOTION_EVENT_FLAG_TAINTED = 0x80000000, -}; - -enum { - /* Used when a motion event is not associated with any display. - * Typically used for non-pointer events. */ - ADISPLAY_ID_NONE = -1, - - /* The default display id. */ - ADISPLAY_ID_DEFAULT = 0, -}; - -enum { - /* - * Indicates that an input device has switches. - * This input source flag is hidden from the API because switches are only used by the system - * and applications have no way to interact with them. - */ - AINPUT_SOURCE_SWITCH = 0x80000000, -}; - -enum { - /** - * Constants for LEDs. Hidden from the API since we don't actually expose a way to interact - * with LEDs to developers - * - * NOTE: If you add LEDs here, you must also add them to InputEventLabels.h - */ - - ALED_NUM_LOCK = 0x00, - ALED_CAPS_LOCK = 0x01, - ALED_SCROLL_LOCK = 0x02, - ALED_COMPOSE = 0x03, - ALED_KANA = 0x04, - ALED_SLEEP = 0x05, - ALED_SUSPEND = 0x06, - ALED_MUTE = 0x07, - ALED_MISC = 0x08, - ALED_MAIL = 0x09, - ALED_CHARGING = 0x0a, - ALED_CONTROLLER_1 = 0x10, - ALED_CONTROLLER_2 = 0x11, - ALED_CONTROLLER_3 = 0x12, - ALED_CONTROLLER_4 = 0x13, -}; - -/* Maximum number of controller LEDs we support */ -#define MAX_CONTROLLER_LEDS 4 - -/* - * SystemUiVisibility constants from View. - */ -enum { - ASYSTEM_UI_VISIBILITY_STATUS_BAR_VISIBLE = 0, - ASYSTEM_UI_VISIBILITY_STATUS_BAR_HIDDEN = 0x00000001, -}; - -/* - * Maximum number of pointers supported per motion event. - * Smallest number of pointers is 1. - * (We want at least 10 but some touch controllers obstensibly configured for 10 pointers - * will occasionally emit 11. There is not much harm making this constant bigger.) - */ -#define MAX_POINTERS 16 - -/* - * Maximum number of samples supported per motion event. - */ -#define MAX_SAMPLES UINT16_MAX - -/* - * Maximum pointer id value supported in a motion event. - * Smallest pointer id is 0. - * (This is limited by our use of BitSet32 to track pointer assignments.) - */ -#define MAX_POINTER_ID 31 - -/* - * Declare a concrete type for the NDK's input event forward declaration. - */ -struct AInputEvent { - virtual ~AInputEvent() { } -}; - -/* - * Declare a concrete type for the NDK's input device forward declaration. - */ -struct AInputDevice { - virtual ~AInputDevice() { } -}; - - -namespace android { - -#ifdef HAVE_ANDROID_OS -class Parcel; -#endif - -/* - * Flags that flow alongside events in the input dispatch system to help with certain - * policy decisions such as waking from device sleep. - * - * These flags are also defined in frameworks/base/core/java/android/view/WindowManagerPolicy.java. - */ -enum { - /* These flags originate in RawEvents and are generally set in the key map. - * NOTE: If you want a flag to be able to set in a keylayout file, then you must add it to - * InputEventLabels.h as well. */ - - // Indicates that the event should wake the device. - POLICY_FLAG_WAKE = 0x00000001, - - // Indicates that the key is virtual, such as a capacitive button, and should - // generate haptic feedback. Virtual keys may be suppressed for some time - // after a recent touch to prevent accidental activation of virtual keys adjacent - // to the touch screen during an edge swipe. - POLICY_FLAG_VIRTUAL = 0x00000002, - - // Indicates that the key is the special function modifier. - POLICY_FLAG_FUNCTION = 0x00000004, - - // Indicates that the key represents a special gesture that has been detected by - // the touch firmware or driver. Causes touch events from the same device to be canceled. - POLICY_FLAG_GESTURE = 0x00000008, - - POLICY_FLAG_RAW_MASK = 0x0000ffff, - - /* These flags are set by the input dispatcher. */ - - // Indicates that the input event was injected. - POLICY_FLAG_INJECTED = 0x01000000, - - // Indicates that the input event is from a trusted source such as a directly attached - // input device or an application with system-wide event injection permission. - POLICY_FLAG_TRUSTED = 0x02000000, - - // Indicates that the input event has passed through an input filter. - POLICY_FLAG_FILTERED = 0x04000000, - - // Disables automatic key repeating behavior. - POLICY_FLAG_DISABLE_KEY_REPEAT = 0x08000000, - - /* These flags are set by the input reader policy as it intercepts each event. */ - - // Indicates that the device was in an interactive state when the - // event was intercepted. - POLICY_FLAG_INTERACTIVE = 0x20000000, - - // Indicates that the event should be dispatched to applications. - // The input event should still be sent to the InputDispatcher so that it can see all - // input events received include those that it will not deliver. - POLICY_FLAG_PASS_TO_USER = 0x40000000, -}; - -/* - * Pointer coordinate data. - */ -struct PointerCoords { - enum { MAX_AXES = 30 }; // 30 so that sizeof(PointerCoords) == 128 - - // Bitfield of axes that are present in this structure. - uint64_t bits __attribute__((aligned(8))); - - // Values of axes that are stored in this structure packed in order by axis id - // for each axis that is present in the structure according to 'bits'. - float values[MAX_AXES]; - - inline void clear() { - BitSet64::clear(bits); - } - - bool isEmpty() const { - return BitSet64::isEmpty(bits); - } - - float getAxisValue(int32_t axis) const; - status_t setAxisValue(int32_t axis, float value); - - void scale(float scale); - void applyOffset(float xOffset, float yOffset); - - inline float getX() const { - return getAxisValue(AMOTION_EVENT_AXIS_X); - } - - inline float getY() const { - return getAxisValue(AMOTION_EVENT_AXIS_Y); - } - -#ifdef HAVE_ANDROID_OS - status_t readFromParcel(Parcel* parcel); - status_t writeToParcel(Parcel* parcel) const; -#endif - - bool operator==(const PointerCoords& other) const; - inline bool operator!=(const PointerCoords& other) const { - return !(*this == other); - } - - void copyFrom(const PointerCoords& other); - -private: - void tooManyAxes(int axis); -}; - -/* - * Pointer property data. - */ -struct PointerProperties { - // The id of the pointer. - int32_t id; - - // The pointer tool type. - int32_t toolType; - - inline void clear() { - id = -1; - toolType = 0; - } - - bool operator==(const PointerProperties& other) const; - inline bool operator!=(const PointerProperties& other) const { - return !(*this == other); - } - - void copyFrom(const PointerProperties& other); -}; - -/* - * Input events. - */ -class InputEvent : public AInputEvent { -public: - virtual ~InputEvent() { } - - virtual int32_t getType() const = 0; - - inline int32_t getDeviceId() const { return mDeviceId; } - - inline int32_t getSource() const { return mSource; } - - inline void setSource(int32_t source) { mSource = source; } - -protected: - void initialize(int32_t deviceId, int32_t source); - void initialize(const InputEvent& from); - - int32_t mDeviceId; - int32_t mSource; -}; - -/* - * Key events. - */ -class KeyEvent : public InputEvent { -public: - virtual ~KeyEvent() { } - - virtual int32_t getType() const { return AINPUT_EVENT_TYPE_KEY; } - - inline int32_t getAction() const { return mAction; } - - inline int32_t getFlags() const { return mFlags; } - - inline void setFlags(int32_t flags) { mFlags = flags; } - - inline int32_t getKeyCode() const { return mKeyCode; } - - inline int32_t getScanCode() const { return mScanCode; } - - inline int32_t getMetaState() const { return mMetaState; } - - inline int32_t getRepeatCount() const { return mRepeatCount; } - - inline nsecs_t getDownTime() const { return mDownTime; } - - inline nsecs_t getEventTime() const { return mEventTime; } - - static const char* getLabel(int32_t keyCode); - static int32_t getKeyCodeFromLabel(const char* label); - - void initialize( - int32_t deviceId, - int32_t source, - int32_t action, - int32_t flags, - int32_t keyCode, - int32_t scanCode, - int32_t metaState, - int32_t repeatCount, - nsecs_t downTime, - nsecs_t eventTime); - void initialize(const KeyEvent& from); - -protected: - int32_t mAction; - int32_t mFlags; - int32_t mKeyCode; - int32_t mScanCode; - int32_t mMetaState; - int32_t mRepeatCount; - nsecs_t mDownTime; - nsecs_t mEventTime; -}; - -/* - * Motion events. - */ -class MotionEvent : public InputEvent { -public: - virtual ~MotionEvent() { } - - virtual int32_t getType() const { return AINPUT_EVENT_TYPE_MOTION; } - - inline int32_t getAction() const { return mAction; } - - inline int32_t getActionMasked() const { return mAction & AMOTION_EVENT_ACTION_MASK; } - - inline int32_t getActionIndex() const { - return (mAction & AMOTION_EVENT_ACTION_POINTER_INDEX_MASK) - >> AMOTION_EVENT_ACTION_POINTER_INDEX_SHIFT; - } - - inline void setAction(int32_t action) { mAction = action; } - - inline int32_t getFlags() const { return mFlags; } - - inline void setFlags(int32_t flags) { mFlags = flags; } - - inline int32_t getEdgeFlags() const { return mEdgeFlags; } - - inline void setEdgeFlags(int32_t edgeFlags) { mEdgeFlags = edgeFlags; } - - inline int32_t getMetaState() const { return mMetaState; } - - inline void setMetaState(int32_t metaState) { mMetaState = metaState; } - - inline int32_t getButtonState() const { return mButtonState; } - - inline int32_t setButtonState(int32_t buttonState) { mButtonState = buttonState; } - - inline int32_t getActionButton() const { return mActionButton; } - - inline void setActionButton(int32_t button) { mActionButton = button; } - - inline float getXOffset() const { return mXOffset; } - - inline float getYOffset() const { return mYOffset; } - - inline float getXPrecision() const { return mXPrecision; } - - inline float getYPrecision() const { return mYPrecision; } - - inline nsecs_t getDownTime() const { return mDownTime; } - - inline void setDownTime(nsecs_t downTime) { mDownTime = downTime; } - - inline size_t getPointerCount() const { return mPointerProperties.size(); } - - inline const PointerProperties* getPointerProperties(size_t pointerIndex) const { - return &mPointerProperties[pointerIndex]; - } - - inline int32_t getPointerId(size_t pointerIndex) const { - return mPointerProperties[pointerIndex].id; - } - - inline int32_t getToolType(size_t pointerIndex) const { - return mPointerProperties[pointerIndex].toolType; - } - - inline nsecs_t getEventTime() const { return mSampleEventTimes[getHistorySize()]; } - - const PointerCoords* getRawPointerCoords(size_t pointerIndex) const; - - float getRawAxisValue(int32_t axis, size_t pointerIndex) const; - - inline float getRawX(size_t pointerIndex) const { - return getRawAxisValue(AMOTION_EVENT_AXIS_X, pointerIndex); - } - - inline float getRawY(size_t pointerIndex) const { - return getRawAxisValue(AMOTION_EVENT_AXIS_Y, pointerIndex); - } - - float getAxisValue(int32_t axis, size_t pointerIndex) const; - - inline float getX(size_t pointerIndex) const { - return getAxisValue(AMOTION_EVENT_AXIS_X, pointerIndex); - } - - inline float getY(size_t pointerIndex) const { - return getAxisValue(AMOTION_EVENT_AXIS_Y, pointerIndex); - } - - inline float getPressure(size_t pointerIndex) const { - return getAxisValue(AMOTION_EVENT_AXIS_PRESSURE, pointerIndex); - } - - inline float getSize(size_t pointerIndex) const { - return getAxisValue(AMOTION_EVENT_AXIS_SIZE, pointerIndex); - } - - inline float getTouchMajor(size_t pointerIndex) const { - return getAxisValue(AMOTION_EVENT_AXIS_TOUCH_MAJOR, pointerIndex); - } - - inline float getTouchMinor(size_t pointerIndex) const { - return getAxisValue(AMOTION_EVENT_AXIS_TOUCH_MINOR, pointerIndex); - } - - inline float getToolMajor(size_t pointerIndex) const { - return getAxisValue(AMOTION_EVENT_AXIS_TOOL_MAJOR, pointerIndex); - } - - inline float getToolMinor(size_t pointerIndex) const { - return getAxisValue(AMOTION_EVENT_AXIS_TOOL_MINOR, pointerIndex); - } - - inline float getOrientation(size_t pointerIndex) const { - return getAxisValue(AMOTION_EVENT_AXIS_ORIENTATION, pointerIndex); - } - - inline size_t getHistorySize() const { return mSampleEventTimes.size() - 1; } - - inline nsecs_t getHistoricalEventTime(size_t historicalIndex) const { - return mSampleEventTimes[historicalIndex]; - } - - const PointerCoords* getHistoricalRawPointerCoords( - size_t pointerIndex, size_t historicalIndex) const; - - float getHistoricalRawAxisValue(int32_t axis, size_t pointerIndex, - size_t historicalIndex) const; - - inline float getHistoricalRawX(size_t pointerIndex, size_t historicalIndex) const { - return getHistoricalRawAxisValue( - AMOTION_EVENT_AXIS_X, pointerIndex, historicalIndex); - } - - inline float getHistoricalRawY(size_t pointerIndex, size_t historicalIndex) const { - return getHistoricalRawAxisValue( - AMOTION_EVENT_AXIS_Y, pointerIndex, historicalIndex); - } - - float getHistoricalAxisValue(int32_t axis, size_t pointerIndex, size_t historicalIndex) const; - - inline float getHistoricalX(size_t pointerIndex, size_t historicalIndex) const { - return getHistoricalAxisValue( - AMOTION_EVENT_AXIS_X, pointerIndex, historicalIndex); - } - - inline float getHistoricalY(size_t pointerIndex, size_t historicalIndex) const { - return getHistoricalAxisValue( - AMOTION_EVENT_AXIS_Y, pointerIndex, historicalIndex); - } - - inline float getHistoricalPressure(size_t pointerIndex, size_t historicalIndex) const { - return getHistoricalAxisValue( - AMOTION_EVENT_AXIS_PRESSURE, pointerIndex, historicalIndex); - } - - inline float getHistoricalSize(size_t pointerIndex, size_t historicalIndex) const { - return getHistoricalAxisValue( - AMOTION_EVENT_AXIS_SIZE, pointerIndex, historicalIndex); - } - - inline float getHistoricalTouchMajor(size_t pointerIndex, size_t historicalIndex) const { - return getHistoricalAxisValue( - AMOTION_EVENT_AXIS_TOUCH_MAJOR, pointerIndex, historicalIndex); - } - - inline float getHistoricalTouchMinor(size_t pointerIndex, size_t historicalIndex) const { - return getHistoricalAxisValue( - AMOTION_EVENT_AXIS_TOUCH_MINOR, pointerIndex, historicalIndex); - } - - inline float getHistoricalToolMajor(size_t pointerIndex, size_t historicalIndex) const { - return getHistoricalAxisValue( - AMOTION_EVENT_AXIS_TOOL_MAJOR, pointerIndex, historicalIndex); - } - - inline float getHistoricalToolMinor(size_t pointerIndex, size_t historicalIndex) const { - return getHistoricalAxisValue( - AMOTION_EVENT_AXIS_TOOL_MINOR, pointerIndex, historicalIndex); - } - - inline float getHistoricalOrientation(size_t pointerIndex, size_t historicalIndex) const { - return getHistoricalAxisValue( - AMOTION_EVENT_AXIS_ORIENTATION, pointerIndex, historicalIndex); - } - - ssize_t findPointerIndex(int32_t pointerId) const; - - void initialize( - int32_t deviceId, - int32_t source, - int32_t action, - int32_t actionButton, - int32_t flags, - int32_t edgeFlags, - int32_t metaState, - int32_t buttonState, - float xOffset, - float yOffset, - float xPrecision, - float yPrecision, - nsecs_t downTime, - nsecs_t eventTime, - size_t pointerCount, - const PointerProperties* pointerProperties, - const PointerCoords* pointerCoords); - - void copyFrom(const MotionEvent* other, bool keepHistory); - - void addSample( - nsecs_t eventTime, - const PointerCoords* pointerCoords); - - void offsetLocation(float xOffset, float yOffset); - - void scale(float scaleFactor); - - // Apply 3x3 perspective matrix transformation. - // Matrix is in row-major form and compatible with SkMatrix. - void transform(const float matrix[9]); - -#ifdef HAVE_ANDROID_OS - status_t readFromParcel(Parcel* parcel); - status_t writeToParcel(Parcel* parcel) const; -#endif - - static bool isTouchEvent(int32_t source, int32_t action); - inline bool isTouchEvent() const { - return isTouchEvent(mSource, mAction); - } - - // Low-level accessors. - inline const PointerProperties* getPointerProperties() const { - return mPointerProperties.array(); - } - inline const nsecs_t* getSampleEventTimes() const { return mSampleEventTimes.array(); } - inline const PointerCoords* getSamplePointerCoords() const { - return mSamplePointerCoords.array(); - } - - static const char* getLabel(int32_t axis); - static int32_t getAxisFromLabel(const char* label); - -protected: - int32_t mAction; - int32_t mActionButton; - int32_t mFlags; - int32_t mEdgeFlags; - int32_t mMetaState; - int32_t mButtonState; - float mXOffset; - float mYOffset; - float mXPrecision; - float mYPrecision; - nsecs_t mDownTime; - Vector mPointerProperties; - Vector mSampleEventTimes; - Vector mSamplePointerCoords; -}; - -/* - * Input event factory. - */ -class InputEventFactoryInterface { -protected: - virtual ~InputEventFactoryInterface() { } - -public: - InputEventFactoryInterface() { } - - virtual KeyEvent* createKeyEvent() = 0; - virtual MotionEvent* createMotionEvent() = 0; -}; - -/* - * A simple input event factory implementation that uses a single preallocated instance - * of each type of input event that are reused for each request. - */ -class PreallocatedInputEventFactory : public InputEventFactoryInterface { -public: - PreallocatedInputEventFactory() { } - virtual ~PreallocatedInputEventFactory() { } - - virtual KeyEvent* createKeyEvent() { return & mKeyEvent; } - virtual MotionEvent* createMotionEvent() { return & mMotionEvent; } - -private: - KeyEvent mKeyEvent; - MotionEvent mMotionEvent; -}; - -/* - * An input event factory implementation that maintains a pool of input events. - */ -class PooledInputEventFactory : public InputEventFactoryInterface { -public: - PooledInputEventFactory(size_t maxPoolSize = 20); - virtual ~PooledInputEventFactory(); - - virtual KeyEvent* createKeyEvent(); - virtual MotionEvent* createMotionEvent(); - - void recycle(InputEvent* event); - -private: - const size_t mMaxPoolSize; - - Vector mKeyEventPool; - Vector mMotionEventPool; -}; - -} // namespace android - -#endif // _LIBINPUT_INPUT_H diff --git a/phonelibs/android_frameworks_native/include/input/InputDevice.h b/phonelibs/android_frameworks_native/include/input/InputDevice.h deleted file mode 100644 index 1ea69d35..00000000 --- a/phonelibs/android_frameworks_native/include/input/InputDevice.h +++ /dev/null @@ -1,170 +0,0 @@ -/* - * Copyright (C) 2012 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef _LIBINPUT_INPUT_DEVICE_H -#define _LIBINPUT_INPUT_DEVICE_H - -#include -#include - -namespace android { - -/* - * Identifies a device. - */ -struct InputDeviceIdentifier { - inline InputDeviceIdentifier() : - bus(0), vendor(0), product(0), version(0) { - } - - // Information provided by the kernel. - String8 name; - String8 location; - String8 uniqueId; - uint16_t bus; - uint16_t vendor; - uint16_t product; - uint16_t version; - - // A composite input device descriptor string that uniquely identifies the device - // even across reboots or reconnections. The value of this field is used by - // upper layers of the input system to associate settings with individual devices. - // It is hashed from whatever kernel provided information is available. - // Ideally, the way this value is computed should not change between Android releases - // because that would invalidate persistent settings that rely on it. - String8 descriptor; - - // A value added to uniquely identify a device in the absence of a unique id. This - // is intended to be a minimum way to distinguish from other active devices and may - // reuse values that are not associated with an input anymore. - uint16_t nonce; -}; - -/* - * Describes the characteristics and capabilities of an input device. - */ -class InputDeviceInfo { -public: - InputDeviceInfo(); - InputDeviceInfo(const InputDeviceInfo& other); - ~InputDeviceInfo(); - - struct MotionRange { - int32_t axis; - uint32_t source; - float min; - float max; - float flat; - float fuzz; - float resolution; - }; - - void initialize(int32_t id, int32_t generation, int32_t controllerNumber, - const InputDeviceIdentifier& identifier, const String8& alias, bool isExternal, - bool hasMic); - - inline int32_t getId() const { return mId; } - inline int32_t getControllerNumber() const { return mControllerNumber; } - inline int32_t getGeneration() const { return mGeneration; } - inline const InputDeviceIdentifier& getIdentifier() const { return mIdentifier; } - inline const String8& getAlias() const { return mAlias; } - inline const String8& getDisplayName() const { - return mAlias.isEmpty() ? mIdentifier.name : mAlias; - } - inline bool isExternal() const { return mIsExternal; } - inline bool hasMic() const { return mHasMic; } - inline uint32_t getSources() const { return mSources; } - - const MotionRange* getMotionRange(int32_t axis, uint32_t source) const; - - void addSource(uint32_t source); - void addMotionRange(int32_t axis, uint32_t source, - float min, float max, float flat, float fuzz, float resolution); - void addMotionRange(const MotionRange& range); - - inline void setKeyboardType(int32_t keyboardType) { mKeyboardType = keyboardType; } - inline int32_t getKeyboardType() const { return mKeyboardType; } - - inline void setKeyCharacterMap(const sp& value) { - mKeyCharacterMap = value; - } - - inline sp getKeyCharacterMap() const { - return mKeyCharacterMap; - } - - inline void setVibrator(bool hasVibrator) { mHasVibrator = hasVibrator; } - inline bool hasVibrator() const { return mHasVibrator; } - - inline void setButtonUnderPad(bool hasButton) { mHasButtonUnderPad = hasButton; } - inline bool hasButtonUnderPad() const { return mHasButtonUnderPad; } - - inline const Vector& getMotionRanges() const { - return mMotionRanges; - } - -private: - int32_t mId; - int32_t mGeneration; - int32_t mControllerNumber; - InputDeviceIdentifier mIdentifier; - String8 mAlias; - bool mIsExternal; - bool mHasMic; - uint32_t mSources; - int32_t mKeyboardType; - sp mKeyCharacterMap; - bool mHasVibrator; - bool mHasButtonUnderPad; - - Vector mMotionRanges; -}; - -/* Types of input device configuration files. */ -enum InputDeviceConfigurationFileType { - INPUT_DEVICE_CONFIGURATION_FILE_TYPE_CONFIGURATION = 0, /* .idc file */ - INPUT_DEVICE_CONFIGURATION_FILE_TYPE_KEY_LAYOUT = 1, /* .kl file */ - INPUT_DEVICE_CONFIGURATION_FILE_TYPE_KEY_CHARACTER_MAP = 2, /* .kcm file */ -}; - -/* - * Gets the path of an input device configuration file, if one is available. - * Considers both system provided and user installed configuration files. - * - * The device identifier is used to construct several default configuration file - * names to try based on the device name, vendor, product, and version. - * - * Returns an empty string if not found. - */ -extern String8 getInputDeviceConfigurationFilePathByDeviceIdentifier( - const InputDeviceIdentifier& deviceIdentifier, - InputDeviceConfigurationFileType type); - -/* - * Gets the path of an input device configuration file, if one is available. - * Considers both system provided and user installed configuration files. - * - * The name is case-sensitive and is used to construct the filename to resolve. - * All characters except 'a'-'z', 'A'-'Z', '0'-'9', '-', and '_' are replaced by underscores. - * - * Returns an empty string if not found. - */ -extern String8 getInputDeviceConfigurationFilePathByName( - const String8& name, InputDeviceConfigurationFileType type); - -} // namespace android - -#endif // _LIBINPUT_INPUT_DEVICE_H diff --git a/phonelibs/android_frameworks_native/include/input/InputEventLabels.h b/phonelibs/android_frameworks_native/include/input/InputEventLabels.h deleted file mode 100644 index c03c0f2d..00000000 --- a/phonelibs/android_frameworks_native/include/input/InputEventLabels.h +++ /dev/null @@ -1,447 +0,0 @@ -/* - * Copyright (C) 2008 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef _LIBINPUT_INPUT_EVENT_LABELS_H -#define _LIBINPUT_INPUT_EVENT_LABELS_H - -#include -#include - -#define DEFINE_KEYCODE(key) { #key, AKEYCODE_##key } -#define DEFINE_AXIS(axis) { #axis, AMOTION_EVENT_AXIS_##axis } -#define DEFINE_LED(led) { #led, ALED_##led } -#define DEFINE_FLAG(flag) { #flag, POLICY_FLAG_##flag } - -namespace android { - -template -size_t size(T (&)[N]) { return N; } - -struct InputEventLabel { - const char *literal; - int value; -}; - - -static const InputEventLabel KEYCODES[] = { - // NOTE: If you add a new keycode here you must also add it to several other files. - // Refer to frameworks/base/core/java/android/view/KeyEvent.java for the full list. - DEFINE_KEYCODE(UNKNOWN), - DEFINE_KEYCODE(SOFT_LEFT), - DEFINE_KEYCODE(SOFT_RIGHT), - DEFINE_KEYCODE(HOME), - DEFINE_KEYCODE(BACK), - DEFINE_KEYCODE(CALL), - DEFINE_KEYCODE(ENDCALL), - DEFINE_KEYCODE(0), - DEFINE_KEYCODE(1), - DEFINE_KEYCODE(2), - DEFINE_KEYCODE(3), - DEFINE_KEYCODE(4), - DEFINE_KEYCODE(5), - DEFINE_KEYCODE(6), - DEFINE_KEYCODE(7), - DEFINE_KEYCODE(8), - DEFINE_KEYCODE(9), - DEFINE_KEYCODE(STAR), - DEFINE_KEYCODE(POUND), - DEFINE_KEYCODE(DPAD_UP), - DEFINE_KEYCODE(DPAD_DOWN), - DEFINE_KEYCODE(DPAD_LEFT), - DEFINE_KEYCODE(DPAD_RIGHT), - DEFINE_KEYCODE(DPAD_CENTER), - DEFINE_KEYCODE(VOLUME_UP), - DEFINE_KEYCODE(VOLUME_DOWN), - DEFINE_KEYCODE(POWER), - DEFINE_KEYCODE(CAMERA), - DEFINE_KEYCODE(CLEAR), - DEFINE_KEYCODE(A), - DEFINE_KEYCODE(B), - DEFINE_KEYCODE(C), - DEFINE_KEYCODE(D), - DEFINE_KEYCODE(E), - DEFINE_KEYCODE(F), - DEFINE_KEYCODE(G), - DEFINE_KEYCODE(H), - DEFINE_KEYCODE(I), - DEFINE_KEYCODE(J), - DEFINE_KEYCODE(K), - DEFINE_KEYCODE(L), - DEFINE_KEYCODE(M), - DEFINE_KEYCODE(N), - DEFINE_KEYCODE(O), - DEFINE_KEYCODE(P), - DEFINE_KEYCODE(Q), - DEFINE_KEYCODE(R), - DEFINE_KEYCODE(S), - DEFINE_KEYCODE(T), - DEFINE_KEYCODE(U), - DEFINE_KEYCODE(V), - DEFINE_KEYCODE(W), - DEFINE_KEYCODE(X), - DEFINE_KEYCODE(Y), - DEFINE_KEYCODE(Z), - DEFINE_KEYCODE(COMMA), - DEFINE_KEYCODE(PERIOD), - DEFINE_KEYCODE(ALT_LEFT), - DEFINE_KEYCODE(ALT_RIGHT), - DEFINE_KEYCODE(SHIFT_LEFT), - DEFINE_KEYCODE(SHIFT_RIGHT), - DEFINE_KEYCODE(TAB), - DEFINE_KEYCODE(SPACE), - DEFINE_KEYCODE(SYM), - DEFINE_KEYCODE(EXPLORER), - DEFINE_KEYCODE(ENVELOPE), - DEFINE_KEYCODE(ENTER), - DEFINE_KEYCODE(DEL), - DEFINE_KEYCODE(GRAVE), - DEFINE_KEYCODE(MINUS), - DEFINE_KEYCODE(EQUALS), - DEFINE_KEYCODE(LEFT_BRACKET), - DEFINE_KEYCODE(RIGHT_BRACKET), - DEFINE_KEYCODE(BACKSLASH), - DEFINE_KEYCODE(SEMICOLON), - DEFINE_KEYCODE(APOSTROPHE), - DEFINE_KEYCODE(SLASH), - DEFINE_KEYCODE(AT), - DEFINE_KEYCODE(NUM), - DEFINE_KEYCODE(HEADSETHOOK), - DEFINE_KEYCODE(FOCUS), // *Camera* focus - DEFINE_KEYCODE(PLUS), - DEFINE_KEYCODE(MENU), - DEFINE_KEYCODE(NOTIFICATION), - DEFINE_KEYCODE(SEARCH), - DEFINE_KEYCODE(MEDIA_PLAY_PAUSE), - DEFINE_KEYCODE(MEDIA_STOP), - DEFINE_KEYCODE(MEDIA_NEXT), - DEFINE_KEYCODE(MEDIA_PREVIOUS), - DEFINE_KEYCODE(MEDIA_REWIND), - DEFINE_KEYCODE(MEDIA_FAST_FORWARD), - DEFINE_KEYCODE(MUTE), - DEFINE_KEYCODE(PAGE_UP), - DEFINE_KEYCODE(PAGE_DOWN), - DEFINE_KEYCODE(PICTSYMBOLS), - DEFINE_KEYCODE(SWITCH_CHARSET), - DEFINE_KEYCODE(BUTTON_A), - DEFINE_KEYCODE(BUTTON_B), - DEFINE_KEYCODE(BUTTON_C), - DEFINE_KEYCODE(BUTTON_X), - DEFINE_KEYCODE(BUTTON_Y), - DEFINE_KEYCODE(BUTTON_Z), - DEFINE_KEYCODE(BUTTON_L1), - DEFINE_KEYCODE(BUTTON_R1), - DEFINE_KEYCODE(BUTTON_L2), - DEFINE_KEYCODE(BUTTON_R2), - DEFINE_KEYCODE(BUTTON_THUMBL), - DEFINE_KEYCODE(BUTTON_THUMBR), - DEFINE_KEYCODE(BUTTON_START), - DEFINE_KEYCODE(BUTTON_SELECT), - DEFINE_KEYCODE(BUTTON_MODE), - DEFINE_KEYCODE(ESCAPE), - DEFINE_KEYCODE(FORWARD_DEL), - DEFINE_KEYCODE(CTRL_LEFT), - DEFINE_KEYCODE(CTRL_RIGHT), - DEFINE_KEYCODE(CAPS_LOCK), - DEFINE_KEYCODE(SCROLL_LOCK), - DEFINE_KEYCODE(META_LEFT), - DEFINE_KEYCODE(META_RIGHT), - DEFINE_KEYCODE(FUNCTION), - DEFINE_KEYCODE(SYSRQ), - DEFINE_KEYCODE(BREAK), - DEFINE_KEYCODE(MOVE_HOME), - DEFINE_KEYCODE(MOVE_END), - DEFINE_KEYCODE(INSERT), - DEFINE_KEYCODE(FORWARD), - DEFINE_KEYCODE(MEDIA_PLAY), - DEFINE_KEYCODE(MEDIA_PAUSE), - DEFINE_KEYCODE(MEDIA_CLOSE), - DEFINE_KEYCODE(MEDIA_EJECT), - DEFINE_KEYCODE(MEDIA_RECORD), - DEFINE_KEYCODE(F1), - DEFINE_KEYCODE(F2), - DEFINE_KEYCODE(F3), - DEFINE_KEYCODE(F4), - DEFINE_KEYCODE(F5), - DEFINE_KEYCODE(F6), - DEFINE_KEYCODE(F7), - DEFINE_KEYCODE(F8), - DEFINE_KEYCODE(F9), - DEFINE_KEYCODE(F10), - DEFINE_KEYCODE(F11), - DEFINE_KEYCODE(F12), - DEFINE_KEYCODE(NUM_LOCK), - DEFINE_KEYCODE(NUMPAD_0), - DEFINE_KEYCODE(NUMPAD_1), - DEFINE_KEYCODE(NUMPAD_2), - DEFINE_KEYCODE(NUMPAD_3), - DEFINE_KEYCODE(NUMPAD_4), - DEFINE_KEYCODE(NUMPAD_5), - DEFINE_KEYCODE(NUMPAD_6), - DEFINE_KEYCODE(NUMPAD_7), - DEFINE_KEYCODE(NUMPAD_8), - DEFINE_KEYCODE(NUMPAD_9), - DEFINE_KEYCODE(NUMPAD_DIVIDE), - DEFINE_KEYCODE(NUMPAD_MULTIPLY), - DEFINE_KEYCODE(NUMPAD_SUBTRACT), - DEFINE_KEYCODE(NUMPAD_ADD), - DEFINE_KEYCODE(NUMPAD_DOT), - DEFINE_KEYCODE(NUMPAD_COMMA), - DEFINE_KEYCODE(NUMPAD_ENTER), - DEFINE_KEYCODE(NUMPAD_EQUALS), - DEFINE_KEYCODE(NUMPAD_LEFT_PAREN), - DEFINE_KEYCODE(NUMPAD_RIGHT_PAREN), - DEFINE_KEYCODE(VOLUME_MUTE), - DEFINE_KEYCODE(INFO), - DEFINE_KEYCODE(CHANNEL_UP), - DEFINE_KEYCODE(CHANNEL_DOWN), - DEFINE_KEYCODE(ZOOM_IN), - DEFINE_KEYCODE(ZOOM_OUT), - DEFINE_KEYCODE(TV), - DEFINE_KEYCODE(WINDOW), - DEFINE_KEYCODE(GUIDE), - DEFINE_KEYCODE(DVR), - DEFINE_KEYCODE(BOOKMARK), - DEFINE_KEYCODE(CAPTIONS), - DEFINE_KEYCODE(SETTINGS), - DEFINE_KEYCODE(TV_POWER), - DEFINE_KEYCODE(TV_INPUT), - DEFINE_KEYCODE(STB_POWER), - DEFINE_KEYCODE(STB_INPUT), - DEFINE_KEYCODE(AVR_POWER), - DEFINE_KEYCODE(AVR_INPUT), - DEFINE_KEYCODE(PROG_RED), - DEFINE_KEYCODE(PROG_GREEN), - DEFINE_KEYCODE(PROG_YELLOW), - DEFINE_KEYCODE(PROG_BLUE), - DEFINE_KEYCODE(APP_SWITCH), - DEFINE_KEYCODE(BUTTON_1), - DEFINE_KEYCODE(BUTTON_2), - DEFINE_KEYCODE(BUTTON_3), - DEFINE_KEYCODE(BUTTON_4), - DEFINE_KEYCODE(BUTTON_5), - DEFINE_KEYCODE(BUTTON_6), - DEFINE_KEYCODE(BUTTON_7), - DEFINE_KEYCODE(BUTTON_8), - DEFINE_KEYCODE(BUTTON_9), - DEFINE_KEYCODE(BUTTON_10), - DEFINE_KEYCODE(BUTTON_11), - DEFINE_KEYCODE(BUTTON_12), - DEFINE_KEYCODE(BUTTON_13), - DEFINE_KEYCODE(BUTTON_14), - DEFINE_KEYCODE(BUTTON_15), - DEFINE_KEYCODE(BUTTON_16), - DEFINE_KEYCODE(LANGUAGE_SWITCH), - DEFINE_KEYCODE(MANNER_MODE), - DEFINE_KEYCODE(3D_MODE), - DEFINE_KEYCODE(CONTACTS), - DEFINE_KEYCODE(CALENDAR), - DEFINE_KEYCODE(MUSIC), - DEFINE_KEYCODE(CALCULATOR), - DEFINE_KEYCODE(ZENKAKU_HANKAKU), - DEFINE_KEYCODE(EISU), - DEFINE_KEYCODE(MUHENKAN), - DEFINE_KEYCODE(HENKAN), - DEFINE_KEYCODE(KATAKANA_HIRAGANA), - DEFINE_KEYCODE(YEN), - DEFINE_KEYCODE(RO), - DEFINE_KEYCODE(KANA), - DEFINE_KEYCODE(ASSIST), - DEFINE_KEYCODE(BRIGHTNESS_DOWN), - DEFINE_KEYCODE(BRIGHTNESS_UP), - DEFINE_KEYCODE(MEDIA_AUDIO_TRACK), - DEFINE_KEYCODE(SLEEP), - DEFINE_KEYCODE(WAKEUP), - DEFINE_KEYCODE(PAIRING), - DEFINE_KEYCODE(MEDIA_TOP_MENU), - DEFINE_KEYCODE(11), - DEFINE_KEYCODE(12), - DEFINE_KEYCODE(LAST_CHANNEL), - DEFINE_KEYCODE(TV_DATA_SERVICE), - DEFINE_KEYCODE(VOICE_ASSIST), - DEFINE_KEYCODE(TV_RADIO_SERVICE), - DEFINE_KEYCODE(TV_TELETEXT), - DEFINE_KEYCODE(TV_NUMBER_ENTRY), - DEFINE_KEYCODE(TV_TERRESTRIAL_ANALOG), - DEFINE_KEYCODE(TV_TERRESTRIAL_DIGITAL), - DEFINE_KEYCODE(TV_SATELLITE), - DEFINE_KEYCODE(TV_SATELLITE_BS), - DEFINE_KEYCODE(TV_SATELLITE_CS), - DEFINE_KEYCODE(TV_SATELLITE_SERVICE), - DEFINE_KEYCODE(TV_NETWORK), - DEFINE_KEYCODE(TV_ANTENNA_CABLE), - DEFINE_KEYCODE(TV_INPUT_HDMI_1), - DEFINE_KEYCODE(TV_INPUT_HDMI_2), - DEFINE_KEYCODE(TV_INPUT_HDMI_3), - DEFINE_KEYCODE(TV_INPUT_HDMI_4), - DEFINE_KEYCODE(TV_INPUT_COMPOSITE_1), - DEFINE_KEYCODE(TV_INPUT_COMPOSITE_2), - DEFINE_KEYCODE(TV_INPUT_COMPONENT_1), - DEFINE_KEYCODE(TV_INPUT_COMPONENT_2), - DEFINE_KEYCODE(TV_INPUT_VGA_1), - DEFINE_KEYCODE(TV_AUDIO_DESCRIPTION), - DEFINE_KEYCODE(TV_AUDIO_DESCRIPTION_MIX_UP), - DEFINE_KEYCODE(TV_AUDIO_DESCRIPTION_MIX_DOWN), - DEFINE_KEYCODE(TV_ZOOM_MODE), - DEFINE_KEYCODE(TV_CONTENTS_MENU), - DEFINE_KEYCODE(TV_MEDIA_CONTEXT_MENU), - DEFINE_KEYCODE(TV_TIMER_PROGRAMMING), - DEFINE_KEYCODE(HELP), - DEFINE_KEYCODE(NAVIGATE_PREVIOUS), - DEFINE_KEYCODE(NAVIGATE_NEXT), - DEFINE_KEYCODE(NAVIGATE_IN), - DEFINE_KEYCODE(NAVIGATE_OUT), - DEFINE_KEYCODE(STEM_PRIMARY), - DEFINE_KEYCODE(STEM_1), - DEFINE_KEYCODE(STEM_2), - DEFINE_KEYCODE(STEM_3), - DEFINE_KEYCODE(MEDIA_SKIP_FORWARD), - DEFINE_KEYCODE(MEDIA_SKIP_BACKWARD), - DEFINE_KEYCODE(MEDIA_STEP_FORWARD), - DEFINE_KEYCODE(MEDIA_STEP_BACKWARD), - DEFINE_KEYCODE(SOFT_SLEEP), - - { NULL, 0 } -}; - -static const InputEventLabel AXES[] = { - DEFINE_AXIS(X), - DEFINE_AXIS(Y), - DEFINE_AXIS(PRESSURE), - DEFINE_AXIS(SIZE), - DEFINE_AXIS(TOUCH_MAJOR), - DEFINE_AXIS(TOUCH_MINOR), - DEFINE_AXIS(TOOL_MAJOR), - DEFINE_AXIS(TOOL_MINOR), - DEFINE_AXIS(ORIENTATION), - DEFINE_AXIS(VSCROLL), - DEFINE_AXIS(HSCROLL), - DEFINE_AXIS(Z), - DEFINE_AXIS(RX), - DEFINE_AXIS(RY), - DEFINE_AXIS(RZ), - DEFINE_AXIS(HAT_X), - DEFINE_AXIS(HAT_Y), - DEFINE_AXIS(LTRIGGER), - DEFINE_AXIS(RTRIGGER), - DEFINE_AXIS(THROTTLE), - DEFINE_AXIS(RUDDER), - DEFINE_AXIS(WHEEL), - DEFINE_AXIS(GAS), - DEFINE_AXIS(BRAKE), - DEFINE_AXIS(DISTANCE), - DEFINE_AXIS(TILT), - DEFINE_AXIS(GENERIC_1), - DEFINE_AXIS(GENERIC_2), - DEFINE_AXIS(GENERIC_3), - DEFINE_AXIS(GENERIC_4), - DEFINE_AXIS(GENERIC_5), - DEFINE_AXIS(GENERIC_6), - DEFINE_AXIS(GENERIC_7), - DEFINE_AXIS(GENERIC_8), - DEFINE_AXIS(GENERIC_9), - DEFINE_AXIS(GENERIC_10), - DEFINE_AXIS(GENERIC_11), - DEFINE_AXIS(GENERIC_12), - DEFINE_AXIS(GENERIC_13), - DEFINE_AXIS(GENERIC_14), - DEFINE_AXIS(GENERIC_15), - DEFINE_AXIS(GENERIC_16), - - // NOTE: If you add a new axis here you must also add it to several other files. - // Refer to frameworks/base/core/java/android/view/MotionEvent.java for the full list. - { NULL, 0 } -}; - -static const InputEventLabel LEDS[] = { - DEFINE_LED(NUM_LOCK), - DEFINE_LED(CAPS_LOCK), - DEFINE_LED(SCROLL_LOCK), - DEFINE_LED(COMPOSE), - DEFINE_LED(KANA), - DEFINE_LED(SLEEP), - DEFINE_LED(SUSPEND), - DEFINE_LED(MUTE), - DEFINE_LED(MISC), - DEFINE_LED(MAIL), - DEFINE_LED(CHARGING), - DEFINE_LED(CONTROLLER_1), - DEFINE_LED(CONTROLLER_2), - DEFINE_LED(CONTROLLER_3), - DEFINE_LED(CONTROLLER_4), - - // NOTE: If you add new LEDs here, you must also add them to Input.h - { NULL, 0 } -}; - -static const InputEventLabel FLAGS[] = { - DEFINE_FLAG(WAKE), - DEFINE_FLAG(VIRTUAL), - DEFINE_FLAG(FUNCTION), - DEFINE_FLAG(GESTURE), - - { NULL, 0 } -}; - -static int lookupValueByLabel(const char* literal, const InputEventLabel *list) { - while (list->literal) { - if (strcmp(literal, list->literal) == 0) { - return list->value; - } - list++; - } - return list->value; -} - -static const char* lookupLabelByValue(int value, const InputEventLabel* list) { - while (list->literal) { - if (list->value == value) { - return list->literal; - } - list++; - } - return NULL; -} - -static int32_t getKeyCodeByLabel(const char* label) { - return int32_t(lookupValueByLabel(label, KEYCODES)); -} - -static const char* getLabelByKeyCode(int32_t keyCode) { - if (keyCode >= 0 && keyCode < size(KEYCODES)) { - return KEYCODES[keyCode].literal; - } - return NULL; -} - -static uint32_t getKeyFlagByLabel(const char* label) { - return uint32_t(lookupValueByLabel(label, FLAGS)); -} - -static int32_t getAxisByLabel(const char* label) { - return int32_t(lookupValueByLabel(label, AXES)); -} - -static const char* getAxisLabel(int32_t axisId) { - return lookupLabelByValue(axisId, AXES); -} - -static int32_t getLedByLabel(const char* label) { - return int32_t(lookupValueByLabel(label, LEDS)); -} - - -} // namespace android -#endif // _LIBINPUT_INPUT_EVENT_LABELS_H diff --git a/phonelibs/android_frameworks_native/include/input/InputTransport.h b/phonelibs/android_frameworks_native/include/input/InputTransport.h deleted file mode 100644 index f31bceab..00000000 --- a/phonelibs/android_frameworks_native/include/input/InputTransport.h +++ /dev/null @@ -1,453 +0,0 @@ -/* - * Copyright (C) 2010 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef _LIBINPUT_INPUT_TRANSPORT_H -#define _LIBINPUT_INPUT_TRANSPORT_H - -/** - * Native input transport. - * - * The InputChannel provides a mechanism for exchanging InputMessage structures across processes. - * - * The InputPublisher and InputConsumer each handle one end-point of an input channel. - * The InputPublisher is used by the input dispatcher to send events to the application. - * The InputConsumer is used by the application to receive events from the input dispatcher. - */ - -#include -#include -#include -#include -#include -#include -#include - -namespace android { - -/* - * Intermediate representation used to send input events and related signals. - * - * Note that this structure is used for IPCs so its layout must be identical - * on 64 and 32 bit processes. This is tested in StructLayout_test.cpp. - */ -struct InputMessage { - enum { - TYPE_KEY = 1, - TYPE_MOTION = 2, - TYPE_FINISHED = 3, - }; - - struct Header { - uint32_t type; - // We don't need this field in order to align the body below but we - // leave it here because InputMessage::size() and other functions - // compute the size of this structure as sizeof(Header) + sizeof(Body). - uint32_t padding; - } header; - - // Body *must* be 8 byte aligned. - union Body { - struct Key { - uint32_t seq; - nsecs_t eventTime __attribute__((aligned(8))); - int32_t deviceId; - int32_t source; - int32_t action; - int32_t flags; - int32_t keyCode; - int32_t scanCode; - int32_t metaState; - int32_t repeatCount; - nsecs_t downTime __attribute__((aligned(8))); - - inline size_t size() const { - return sizeof(Key); - } - } key; - - struct Motion { - uint32_t seq; - nsecs_t eventTime __attribute__((aligned(8))); - int32_t deviceId; - int32_t source; - int32_t action; - int32_t actionButton; - int32_t flags; - int32_t metaState; - int32_t buttonState; - int32_t edgeFlags; - nsecs_t downTime __attribute__((aligned(8))); - float xOffset; - float yOffset; - float xPrecision; - float yPrecision; - uint32_t pointerCount; - // Note that PointerCoords requires 8 byte alignment. - struct Pointer { - PointerProperties properties; - PointerCoords coords; - } pointers[MAX_POINTERS]; - - int32_t getActionId() const { - uint32_t index = (action & AMOTION_EVENT_ACTION_POINTER_INDEX_MASK) - >> AMOTION_EVENT_ACTION_POINTER_INDEX_SHIFT; - return pointers[index].properties.id; - } - - inline size_t size() const { - return sizeof(Motion) - sizeof(Pointer) * MAX_POINTERS - + sizeof(Pointer) * pointerCount; - } - } motion; - - struct Finished { - uint32_t seq; - bool handled; - - inline size_t size() const { - return sizeof(Finished); - } - } finished; - } __attribute__((aligned(8))) body; - - bool isValid(size_t actualSize) const; - size_t size() const; -}; - -/* - * An input channel consists of a local unix domain socket used to send and receive - * input messages across processes. Each channel has a descriptive name for debugging purposes. - * - * Each endpoint has its own InputChannel object that specifies its file descriptor. - * - * The input channel is closed when all references to it are released. - */ -class InputChannel : public RefBase { -protected: - virtual ~InputChannel(); - -public: - InputChannel(const String8& name, int fd); - - /* Creates a pair of input channels. - * - * Returns OK on success. - */ - static status_t openInputChannelPair(const String8& name, - sp& outServerChannel, sp& outClientChannel); - - inline String8 getName() const { return mName; } - inline int getFd() const { return mFd; } - - /* Sends a message to the other endpoint. - * - * If the channel is full then the message is guaranteed not to have been sent at all. - * Try again after the consumer has sent a finished signal indicating that it has - * consumed some of the pending messages from the channel. - * - * Returns OK on success. - * Returns WOULD_BLOCK if the channel is full. - * Returns DEAD_OBJECT if the channel's peer has been closed. - * Other errors probably indicate that the channel is broken. - */ - status_t sendMessage(const InputMessage* msg); - - /* Receives a message sent by the other endpoint. - * - * If there is no message present, try again after poll() indicates that the fd - * is readable. - * - * Returns OK on success. - * Returns WOULD_BLOCK if there is no message present. - * Returns DEAD_OBJECT if the channel's peer has been closed. - * Other errors probably indicate that the channel is broken. - */ - status_t receiveMessage(InputMessage* msg); - - /* Returns a new object that has a duplicate of this channel's fd. */ - sp dup() const; - -private: - String8 mName; - int mFd; -}; - -/* - * Publishes input events to an input channel. - */ -class InputPublisher { -public: - /* Creates a publisher associated with an input channel. */ - explicit InputPublisher(const sp& channel); - - /* Destroys the publisher and releases its input channel. */ - ~InputPublisher(); - - /* Gets the underlying input channel. */ - inline sp getChannel() { return mChannel; } - - /* Publishes a key event to the input channel. - * - * Returns OK on success. - * Returns WOULD_BLOCK if the channel is full. - * Returns DEAD_OBJECT if the channel's peer has been closed. - * Returns BAD_VALUE if seq is 0. - * Other errors probably indicate that the channel is broken. - */ - status_t publishKeyEvent( - uint32_t seq, - int32_t deviceId, - int32_t source, - int32_t action, - int32_t flags, - int32_t keyCode, - int32_t scanCode, - int32_t metaState, - int32_t repeatCount, - nsecs_t downTime, - nsecs_t eventTime); - - /* Publishes a motion event to the input channel. - * - * Returns OK on success. - * Returns WOULD_BLOCK if the channel is full. - * Returns DEAD_OBJECT if the channel's peer has been closed. - * Returns BAD_VALUE if seq is 0 or if pointerCount is less than 1 or greater than MAX_POINTERS. - * Other errors probably indicate that the channel is broken. - */ - status_t publishMotionEvent( - uint32_t seq, - int32_t deviceId, - int32_t source, - int32_t action, - int32_t actionButton, - int32_t flags, - int32_t edgeFlags, - int32_t metaState, - int32_t buttonState, - float xOffset, - float yOffset, - float xPrecision, - float yPrecision, - nsecs_t downTime, - nsecs_t eventTime, - uint32_t pointerCount, - const PointerProperties* pointerProperties, - const PointerCoords* pointerCoords); - - /* Receives the finished signal from the consumer in reply to the original dispatch signal. - * If a signal was received, returns the message sequence number, - * and whether the consumer handled the message. - * - * The returned sequence number is never 0 unless the operation failed. - * - * Returns OK on success. - * Returns WOULD_BLOCK if there is no signal present. - * Returns DEAD_OBJECT if the channel's peer has been closed. - * Other errors probably indicate that the channel is broken. - */ - status_t receiveFinishedSignal(uint32_t* outSeq, bool* outHandled); - -private: - sp mChannel; -}; - -/* - * Consumes input events from an input channel. - */ -class InputConsumer { -public: - /* Creates a consumer associated with an input channel. */ - explicit InputConsumer(const sp& channel); - - /* Destroys the consumer and releases its input channel. */ - ~InputConsumer(); - - /* Gets the underlying input channel. */ - inline sp getChannel() { return mChannel; } - - /* Consumes an input event from the input channel and copies its contents into - * an InputEvent object created using the specified factory. - * - * Tries to combine a series of move events into larger batches whenever possible. - * - * If consumeBatches is false, then defers consuming pending batched events if it - * is possible for additional samples to be added to them later. Call hasPendingBatch() - * to determine whether a pending batch is available to be consumed. - * - * If consumeBatches is true, then events are still batched but they are consumed - * immediately as soon as the input channel is exhausted. - * - * The frameTime parameter specifies the time when the current display frame started - * rendering in the CLOCK_MONOTONIC time base, or -1 if unknown. - * - * The returned sequence number is never 0 unless the operation failed. - * - * Returns OK on success. - * Returns WOULD_BLOCK if there is no event present. - * Returns DEAD_OBJECT if the channel's peer has been closed. - * Returns NO_MEMORY if the event could not be created. - * Other errors probably indicate that the channel is broken. - */ - status_t consume(InputEventFactoryInterface* factory, bool consumeBatches, - nsecs_t frameTime, uint32_t* outSeq, InputEvent** outEvent); - - /* Sends a finished signal to the publisher to inform it that the message - * with the specified sequence number has finished being process and whether - * the message was handled by the consumer. - * - * Returns OK on success. - * Returns BAD_VALUE if seq is 0. - * Other errors probably indicate that the channel is broken. - */ - status_t sendFinishedSignal(uint32_t seq, bool handled); - - /* Returns true if there is a deferred event waiting. - * - * Should be called after calling consume() to determine whether the consumer - * has a deferred event to be processed. Deferred events are somewhat special in - * that they have already been removed from the input channel. If the input channel - * becomes empty, the client may need to do extra work to ensure that it processes - * the deferred event despite the fact that the input channel's file descriptor - * is not readable. - * - * One option is simply to call consume() in a loop until it returns WOULD_BLOCK. - * This guarantees that all deferred events will be processed. - * - * Alternately, the caller can call hasDeferredEvent() to determine whether there is - * a deferred event waiting and then ensure that its event loop wakes up at least - * one more time to consume the deferred event. - */ - bool hasDeferredEvent() const; - - /* Returns true if there is a pending batch. - * - * Should be called after calling consume() with consumeBatches == false to determine - * whether consume() should be called again later on with consumeBatches == true. - */ - bool hasPendingBatch() const; - -private: - // True if touch resampling is enabled. - const bool mResampleTouch; - - // The input channel. - sp mChannel; - - // The current input message. - InputMessage mMsg; - - // True if mMsg contains a valid input message that was deferred from the previous - // call to consume and that still needs to be handled. - bool mMsgDeferred; - - // Batched motion events per device and source. - struct Batch { - Vector samples; - }; - Vector mBatches; - - // Touch state per device and source, only for sources of class pointer. - struct History { - nsecs_t eventTime; - BitSet32 idBits; - int32_t idToIndex[MAX_POINTER_ID + 1]; - PointerCoords pointers[MAX_POINTERS]; - - void initializeFrom(const InputMessage* msg) { - eventTime = msg->body.motion.eventTime; - idBits.clear(); - for (uint32_t i = 0; i < msg->body.motion.pointerCount; i++) { - uint32_t id = msg->body.motion.pointers[i].properties.id; - idBits.markBit(id); - idToIndex[id] = i; - pointers[i].copyFrom(msg->body.motion.pointers[i].coords); - } - } - - const PointerCoords& getPointerById(uint32_t id) const { - return pointers[idToIndex[id]]; - } - }; - struct TouchState { - int32_t deviceId; - int32_t source; - size_t historyCurrent; - size_t historySize; - History history[2]; - History lastResample; - - void initialize(int32_t deviceId, int32_t source) { - this->deviceId = deviceId; - this->source = source; - historyCurrent = 0; - historySize = 0; - lastResample.eventTime = 0; - lastResample.idBits.clear(); - } - - void addHistory(const InputMessage* msg) { - historyCurrent ^= 1; - if (historySize < 2) { - historySize += 1; - } - history[historyCurrent].initializeFrom(msg); - } - - const History* getHistory(size_t index) const { - return &history[(historyCurrent + index) & 1]; - } - }; - Vector mTouchStates; - - // Chain of batched sequence numbers. When multiple input messages are combined into - // a batch, we append a record here that associates the last sequence number in the - // batch with the previous one. When the finished signal is sent, we traverse the - // chain to individually finish all input messages that were part of the batch. - struct SeqChain { - uint32_t seq; // sequence number of batched input message - uint32_t chain; // sequence number of previous batched input message - }; - Vector mSeqChains; - - status_t consumeBatch(InputEventFactoryInterface* factory, - nsecs_t frameTime, uint32_t* outSeq, InputEvent** outEvent); - status_t consumeSamples(InputEventFactoryInterface* factory, - Batch& batch, size_t count, uint32_t* outSeq, InputEvent** outEvent); - - void updateTouchState(InputMessage* msg); - void rewriteMessage(const TouchState& state, InputMessage* msg); - void resampleTouchState(nsecs_t frameTime, MotionEvent* event, - const InputMessage *next); - - ssize_t findBatch(int32_t deviceId, int32_t source) const; - ssize_t findTouchState(int32_t deviceId, int32_t source) const; - - status_t sendUnchainedFinishedSignal(uint32_t seq, bool handled); - - static void initializeKeyEvent(KeyEvent* event, const InputMessage* msg); - static void initializeMotionEvent(MotionEvent* event, const InputMessage* msg); - static void addSample(MotionEvent* event, const InputMessage* msg); - static bool canAddSample(const Batch& batch, const InputMessage* msg); - static ssize_t findSampleNoLaterThan(const Batch& batch, nsecs_t time); - static bool shouldResampleTool(int32_t toolType); - - static bool isTouchResamplingEnabled(); -}; - -} // namespace android - -#endif // _LIBINPUT_INPUT_TRANSPORT_H diff --git a/phonelibs/android_frameworks_native/include/input/KeyCharacterMap.h b/phonelibs/android_frameworks_native/include/input/KeyCharacterMap.h deleted file mode 100644 index 3f0914b6..00000000 --- a/phonelibs/android_frameworks_native/include/input/KeyCharacterMap.h +++ /dev/null @@ -1,265 +0,0 @@ -/* - * Copyright (C) 2008 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef _LIBINPUT_KEY_CHARACTER_MAP_H -#define _LIBINPUT_KEY_CHARACTER_MAP_H - -#include - -#if HAVE_ANDROID_OS -#include -#endif - -#include -#include -#include -#include -#include -#include -#include - -namespace android { - -/** - * Describes a mapping from Android key codes to characters. - * Also specifies other functions of the keyboard such as the keyboard type - * and key modifier semantics. - * - * This object is immutable after it has been loaded. - */ -class KeyCharacterMap : public RefBase { -public: - enum KeyboardType { - KEYBOARD_TYPE_UNKNOWN = 0, - KEYBOARD_TYPE_NUMERIC = 1, - KEYBOARD_TYPE_PREDICTIVE = 2, - KEYBOARD_TYPE_ALPHA = 3, - KEYBOARD_TYPE_FULL = 4, - KEYBOARD_TYPE_SPECIAL_FUNCTION = 5, - KEYBOARD_TYPE_OVERLAY = 6, - }; - - enum Format { - // Base keyboard layout, may contain device-specific options, such as "type" declaration. - FORMAT_BASE = 0, - // Overlay keyboard layout, more restrictive, may be published by applications, - // cannot override device-specific options. - FORMAT_OVERLAY = 1, - // Either base or overlay layout ok. - FORMAT_ANY = 2, - }; - - // Substitute key code and meta state for fallback action. - struct FallbackAction { - int32_t keyCode; - int32_t metaState; - }; - - /* Loads a key character map from a file. */ - static status_t load(const String8& filename, Format format, sp* outMap); - - /* Loads a key character map from its string contents. */ - static status_t loadContents(const String8& filename, - const char* contents, Format format, sp* outMap); - - /* Combines a base key character map and an overlay. */ - static sp combine(const sp& base, - const sp& overlay); - - /* Returns an empty key character map. */ - static sp empty(); - - /* Gets the keyboard type. */ - int32_t getKeyboardType() const; - - /* Gets the primary character for this key as in the label physically printed on it. - * Returns 0 if none (eg. for non-printing keys). */ - char16_t getDisplayLabel(int32_t keyCode) const; - - /* Gets the Unicode character for the number or symbol generated by the key - * when the keyboard is used as a dialing pad. - * Returns 0 if no number or symbol is generated. - */ - char16_t getNumber(int32_t keyCode) const; - - /* Gets the Unicode character generated by the key and meta key modifiers. - * Returns 0 if no character is generated. - */ - char16_t getCharacter(int32_t keyCode, int32_t metaState) const; - - /* Gets the fallback action to use by default if the application does not - * handle the specified key. - * Returns true if an action was available, false if none. - */ - bool getFallbackAction(int32_t keyCode, int32_t metaState, - FallbackAction* outFallbackAction) const; - - /* Gets the first matching Unicode character that can be generated by the key, - * preferring the one with the specified meta key modifiers. - * Returns 0 if no matching character is generated. - */ - char16_t getMatch(int32_t keyCode, const char16_t* chars, - size_t numChars, int32_t metaState) const; - - /* Gets a sequence of key events that could plausibly generate the specified - * character sequence. Returns false if some of the characters cannot be generated. - */ - bool getEvents(int32_t deviceId, const char16_t* chars, size_t numChars, - Vector& outEvents) const; - - /* Maps a scan code and usage code to a key code, in case this key map overrides - * the mapping in some way. */ - status_t mapKey(int32_t scanCode, int32_t usageCode, int32_t* outKeyCode) const; - - /* Tries to find a replacement key code for a given key code and meta state - * in character map. */ - void tryRemapKey(int32_t scanCode, int32_t metaState, - int32_t* outKeyCode, int32_t* outMetaState) const; - -#if HAVE_ANDROID_OS - /* Reads a key map from a parcel. */ - static sp readFromParcel(Parcel* parcel); - - /* Writes a key map to a parcel. */ - void writeToParcel(Parcel* parcel) const; -#endif - -protected: - virtual ~KeyCharacterMap(); - -private: - struct Behavior { - Behavior(); - Behavior(const Behavior& other); - - /* The next behavior in the list, or NULL if none. */ - Behavior* next; - - /* The meta key modifiers for this behavior. */ - int32_t metaState; - - /* The character to insert. */ - char16_t character; - - /* The fallback keycode if the key is not handled. */ - int32_t fallbackKeyCode; - - /* The replacement keycode if the key has to be replaced outright. */ - int32_t replacementKeyCode; - }; - - struct Key { - Key(); - Key(const Key& other); - ~Key(); - - /* The single character label printed on the key, or 0 if none. */ - char16_t label; - - /* The number or symbol character generated by the key, or 0 if none. */ - char16_t number; - - /* The list of key behaviors sorted from most specific to least specific - * meta key binding. */ - Behavior* firstBehavior; - }; - - class Parser { - enum State { - STATE_TOP = 0, - STATE_KEY = 1, - }; - - enum { - PROPERTY_LABEL = 1, - PROPERTY_NUMBER = 2, - PROPERTY_META = 3, - }; - - struct Property { - inline Property(int32_t property = 0, int32_t metaState = 0) : - property(property), metaState(metaState) { } - - int32_t property; - int32_t metaState; - }; - - KeyCharacterMap* mMap; - Tokenizer* mTokenizer; - Format mFormat; - State mState; - int32_t mKeyCode; - - public: - Parser(KeyCharacterMap* map, Tokenizer* tokenizer, Format format); - ~Parser(); - status_t parse(); - - private: - status_t parseType(); - status_t parseMap(); - status_t parseMapKey(); - status_t parseKey(); - status_t parseKeyProperty(); - status_t finishKey(Key* key); - status_t parseModifier(const String8& token, int32_t* outMetaState); - status_t parseCharacterLiteral(char16_t* outCharacter); - }; - - static sp sEmpty; - - KeyedVector mKeys; - int mType; - - KeyedVector mKeysByScanCode; - KeyedVector mKeysByUsageCode; - - KeyCharacterMap(); - KeyCharacterMap(const KeyCharacterMap& other); - - bool getKey(int32_t keyCode, const Key** outKey) const; - bool getKeyBehavior(int32_t keyCode, int32_t metaState, - const Key** outKey, const Behavior** outBehavior) const; - static bool matchesMetaState(int32_t eventMetaState, int32_t behaviorMetaState); - - bool findKey(char16_t ch, int32_t* outKeyCode, int32_t* outMetaState) const; - - static status_t load(Tokenizer* tokenizer, Format format, sp* outMap); - - static void addKey(Vector& outEvents, - int32_t deviceId, int32_t keyCode, int32_t metaState, bool down, nsecs_t time); - static void addMetaKeys(Vector& outEvents, - int32_t deviceId, int32_t metaState, bool down, nsecs_t time, - int32_t* currentMetaState); - static bool addSingleEphemeralMetaKey(Vector& outEvents, - int32_t deviceId, int32_t metaState, bool down, nsecs_t time, - int32_t keyCode, int32_t keyMetaState, - int32_t* currentMetaState); - static void addDoubleEphemeralMetaKey(Vector& outEvents, - int32_t deviceId, int32_t metaState, bool down, nsecs_t time, - int32_t leftKeyCode, int32_t leftKeyMetaState, - int32_t rightKeyCode, int32_t rightKeyMetaState, - int32_t eitherKeyMetaState, - int32_t* currentMetaState); - static void addLockedMetaKey(Vector& outEvents, - int32_t deviceId, int32_t metaState, nsecs_t time, - int32_t keyCode, int32_t keyMetaState, - int32_t* currentMetaState); -}; - -} // namespace android - -#endif // _LIBINPUT_KEY_CHARACTER_MAP_H diff --git a/phonelibs/android_frameworks_native/include/input/KeyLayoutMap.h b/phonelibs/android_frameworks_native/include/input/KeyLayoutMap.h deleted file mode 100644 index 1e8de717..00000000 --- a/phonelibs/android_frameworks_native/include/input/KeyLayoutMap.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Copyright (C) 2008 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef _LIBINPUT_KEY_LAYOUT_MAP_H -#define _LIBINPUT_KEY_LAYOUT_MAP_H - -#include -#include -#include -#include -#include - -namespace android { - -struct AxisInfo { - enum Mode { - // Axis value is reported directly. - MODE_NORMAL = 0, - // Axis value should be inverted before reporting. - MODE_INVERT = 1, - // Axis value should be split into two axes - MODE_SPLIT = 2, - }; - - // Axis mode. - Mode mode; - - // Axis id. - // When split, this is the axis used for values smaller than the split position. - int32_t axis; - - // When split, this is the axis used for values after higher than the split position. - int32_t highAxis; - - // The split value, or 0 if not split. - int32_t splitValue; - - // The flat value, or -1 if none. - int32_t flatOverride; - - AxisInfo() : mode(MODE_NORMAL), axis(-1), highAxis(-1), splitValue(0), flatOverride(-1) { - } -}; - -/** - * Describes a mapping from keyboard scan codes and joystick axes to Android key codes and axes. - * - * This object is immutable after it has been loaded. - */ -class KeyLayoutMap : public RefBase { -public: - static status_t load(const String8& filename, sp* outMap); - - status_t mapKey(int32_t scanCode, int32_t usageCode, - int32_t* outKeyCode, uint32_t* outFlags) const; - status_t findScanCodesForKey(int32_t keyCode, Vector* outScanCodes) const; - status_t findScanCodeForLed(int32_t ledCode, int32_t* outScanCode) const; - status_t findUsageCodeForLed(int32_t ledCode, int32_t* outUsageCode) const; - - status_t mapAxis(int32_t scanCode, AxisInfo* outAxisInfo) const; - -protected: - virtual ~KeyLayoutMap(); - -private: - struct Key { - int32_t keyCode; - uint32_t flags; - }; - - struct Led { - int32_t ledCode; - }; - - - KeyedVector mKeysByScanCode; - KeyedVector mKeysByUsageCode; - KeyedVector mAxes; - KeyedVector mLedsByScanCode; - KeyedVector mLedsByUsageCode; - - KeyLayoutMap(); - - const Key* getKey(int32_t scanCode, int32_t usageCode) const; - - class Parser { - KeyLayoutMap* mMap; - Tokenizer* mTokenizer; - - public: - Parser(KeyLayoutMap* map, Tokenizer* tokenizer); - ~Parser(); - status_t parse(); - - private: - status_t parseKey(); - status_t parseAxis(); - status_t parseLed(); - }; -}; - -} // namespace android - -#endif // _LIBINPUT_KEY_LAYOUT_MAP_H diff --git a/phonelibs/android_frameworks_native/include/input/Keyboard.h b/phonelibs/android_frameworks_native/include/input/Keyboard.h deleted file mode 100644 index d4903e98..00000000 --- a/phonelibs/android_frameworks_native/include/input/Keyboard.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * Copyright (C) 2010 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef _LIBINPUT_KEYBOARD_H -#define _LIBINPUT_KEYBOARD_H - -#include -#include -#include -#include -#include -#include - -namespace android { - -enum { - /* Device id of the built in keyboard. */ - DEVICE_ID_BUILT_IN_KEYBOARD = 0, - - /* Device id of a generic virtual keyboard with a full layout that can be used - * to synthesize key events. */ - DEVICE_ID_VIRTUAL_KEYBOARD = -1, -}; - -class KeyLayoutMap; -class KeyCharacterMap; - -/** - * Loads the key layout map and key character map for a keyboard device. - */ -class KeyMap { -public: - String8 keyLayoutFile; - sp keyLayoutMap; - - String8 keyCharacterMapFile; - sp keyCharacterMap; - - KeyMap(); - ~KeyMap(); - - status_t load(const InputDeviceIdentifier& deviceIdenfier, - const PropertyMap* deviceConfiguration); - - inline bool haveKeyLayout() const { - return !keyLayoutFile.isEmpty(); - } - - inline bool haveKeyCharacterMap() const { - return !keyCharacterMapFile.isEmpty(); - } - - inline bool isComplete() const { - return haveKeyLayout() && haveKeyCharacterMap(); - } - -private: - bool probeKeyMap(const InputDeviceIdentifier& deviceIdentifier, const String8& name); - status_t loadKeyLayout(const InputDeviceIdentifier& deviceIdentifier, const String8& name); - status_t loadKeyCharacterMap(const InputDeviceIdentifier& deviceIdentifier, - const String8& name); - String8 getPath(const InputDeviceIdentifier& deviceIdentifier, - const String8& name, InputDeviceConfigurationFileType type); -}; - -/** - * Returns true if the keyboard is eligible for use as a built-in keyboard. - */ -extern bool isEligibleBuiltInKeyboard(const InputDeviceIdentifier& deviceIdentifier, - const PropertyMap* deviceConfiguration, const KeyMap* keyMap); - -/** - * Updates a meta state field when a key is pressed or released. - */ -extern int32_t updateMetaState(int32_t keyCode, bool down, int32_t oldMetaState); - -/** - * Normalizes the meta state such that if either the left or right modifier - * meta state bits are set then the result will also include the universal - * bit for that modifier. - */ -extern int32_t normalizeMetaState(int32_t oldMetaState); - -/** - * Returns true if a key is a meta key like ALT or CAPS_LOCK. - */ -extern bool isMetaKey(int32_t keyCode); - -} // namespace android - -#endif // _LIBINPUT_KEYBOARD_H diff --git a/phonelibs/android_frameworks_native/include/input/VelocityControl.h b/phonelibs/android_frameworks_native/include/input/VelocityControl.h deleted file mode 100644 index 1acc2aef..00000000 --- a/phonelibs/android_frameworks_native/include/input/VelocityControl.h +++ /dev/null @@ -1,107 +0,0 @@ -/* - * Copyright (C) 2012 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef _LIBINPUT_VELOCITY_CONTROL_H -#define _LIBINPUT_VELOCITY_CONTROL_H - -#include -#include -#include - -namespace android { - -/* - * Specifies parameters that govern pointer or wheel acceleration. - */ -struct VelocityControlParameters { - // A scale factor that is multiplied with the raw velocity deltas - // prior to applying any other velocity control factors. The scale - // factor should be used to adapt the input device resolution - // (eg. counts per inch) to the output device resolution (eg. pixels per inch). - // - // Must be a positive value. - // Default is 1.0 (no scaling). - float scale; - - // The scaled speed at which acceleration begins to be applied. - // This value establishes the upper bound of a low speed regime for - // small precise motions that are performed without any acceleration. - // - // Must be a non-negative value. - // Default is 0.0 (no low threshold). - float lowThreshold; - - // The scaled speed at which maximum acceleration is applied. - // The difference between highThreshold and lowThreshold controls - // the range of speeds over which the acceleration factor is interpolated. - // The wider the range, the smoother the acceleration. - // - // Must be a non-negative value greater than or equal to lowThreshold. - // Default is 0.0 (no high threshold). - float highThreshold; - - // The acceleration factor. - // When the speed is above the low speed threshold, the velocity will scaled - // by an interpolated value between 1.0 and this amount. - // - // Must be a positive greater than or equal to 1.0. - // Default is 1.0 (no acceleration). - float acceleration; - - VelocityControlParameters() : - scale(1.0f), lowThreshold(0.0f), highThreshold(0.0f), acceleration(1.0f) { - } - - VelocityControlParameters(float scale, float lowThreshold, - float highThreshold, float acceleration) : - scale(scale), lowThreshold(lowThreshold), - highThreshold(highThreshold), acceleration(acceleration) { - } -}; - -/* - * Implements mouse pointer and wheel speed control and acceleration. - */ -class VelocityControl { -public: - VelocityControl(); - - /* Sets the various parameters. */ - void setParameters(const VelocityControlParameters& parameters); - - /* Resets the current movement counters to zero. - * This has the effect of nullifying any acceleration. */ - void reset(); - - /* Translates a raw movement delta into an appropriately - * scaled / accelerated delta based on the current velocity. */ - void move(nsecs_t eventTime, float* deltaX, float* deltaY); - -private: - // If no movements are received within this amount of time, - // we assume the movement has stopped and reset the movement counters. - static const nsecs_t STOP_TIME = 500 * 1000000; // 500 ms - - VelocityControlParameters mParameters; - - nsecs_t mLastMovementTime; - VelocityTracker::Position mRawPosition; - VelocityTracker mVelocityTracker; -}; - -} // namespace android - -#endif // _LIBINPUT_VELOCITY_CONTROL_H diff --git a/phonelibs/android_frameworks_native/include/input/VelocityTracker.h b/phonelibs/android_frameworks_native/include/input/VelocityTracker.h deleted file mode 100644 index 795f575a..00000000 --- a/phonelibs/android_frameworks_native/include/input/VelocityTracker.h +++ /dev/null @@ -1,269 +0,0 @@ -/* - * Copyright (C) 2012 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef _LIBINPUT_VELOCITY_TRACKER_H -#define _LIBINPUT_VELOCITY_TRACKER_H - -#include -#include -#include - -namespace android { - -class VelocityTrackerStrategy; - -/* - * Calculates the velocity of pointer movements over time. - */ -class VelocityTracker { -public: - struct Position { - float x, y; - }; - - struct Estimator { - static const size_t MAX_DEGREE = 4; - - // Estimator time base. - nsecs_t time; - - // Polynomial coefficients describing motion in X and Y. - float xCoeff[MAX_DEGREE + 1], yCoeff[MAX_DEGREE + 1]; - - // Polynomial degree (number of coefficients), or zero if no information is - // available. - uint32_t degree; - - // Confidence (coefficient of determination), between 0 (no fit) and 1 (perfect fit). - float confidence; - - inline void clear() { - time = 0; - degree = 0; - confidence = 0; - for (size_t i = 0; i <= MAX_DEGREE; i++) { - xCoeff[i] = 0; - yCoeff[i] = 0; - } - } - }; - - // Creates a velocity tracker using the specified strategy. - // If strategy is NULL, uses the default strategy for the platform. - VelocityTracker(const char* strategy = NULL); - - ~VelocityTracker(); - - // Resets the velocity tracker state. - void clear(); - - // Resets the velocity tracker state for specific pointers. - // Call this method when some pointers have changed and may be reusing - // an id that was assigned to a different pointer earlier. - void clearPointers(BitSet32 idBits); - - // Adds movement information for a set of pointers. - // The idBits bitfield specifies the pointer ids of the pointers whose positions - // are included in the movement. - // The positions array contains position information for each pointer in order by - // increasing id. Its size should be equal to the number of one bits in idBits. - void addMovement(nsecs_t eventTime, BitSet32 idBits, const Position* positions); - - // Adds movement information for all pointers in a MotionEvent, including historical samples. - void addMovement(const MotionEvent* event); - - // Gets the velocity of the specified pointer id in position units per second. - // Returns false and sets the velocity components to zero if there is - // insufficient movement information for the pointer. - bool getVelocity(uint32_t id, float* outVx, float* outVy) const; - - // Gets an estimator for the recent movements of the specified pointer id. - // Returns false and clears the estimator if there is no information available - // about the pointer. - bool getEstimator(uint32_t id, Estimator* outEstimator) const; - - // Gets the active pointer id, or -1 if none. - inline int32_t getActivePointerId() const { return mActivePointerId; } - - // Gets a bitset containing all pointer ids from the most recent movement. - inline BitSet32 getCurrentPointerIdBits() const { return mCurrentPointerIdBits; } - -private: - static const char* DEFAULT_STRATEGY; - - nsecs_t mLastEventTime; - BitSet32 mCurrentPointerIdBits; - int32_t mActivePointerId; - VelocityTrackerStrategy* mStrategy; - - bool configureStrategy(const char* strategy); - - static VelocityTrackerStrategy* createStrategy(const char* strategy); -}; - - -/* - * Implements a particular velocity tracker algorithm. - */ -class VelocityTrackerStrategy { -protected: - VelocityTrackerStrategy() { } - -public: - virtual ~VelocityTrackerStrategy() { } - - virtual void clear() = 0; - virtual void clearPointers(BitSet32 idBits) = 0; - virtual void addMovement(nsecs_t eventTime, BitSet32 idBits, - const VelocityTracker::Position* positions) = 0; - virtual bool getEstimator(uint32_t id, VelocityTracker::Estimator* outEstimator) const = 0; -}; - - -/* - * Velocity tracker algorithm based on least-squares linear regression. - */ -class LeastSquaresVelocityTrackerStrategy : public VelocityTrackerStrategy { -public: - enum Weighting { - // No weights applied. All data points are equally reliable. - WEIGHTING_NONE, - - // Weight by time delta. Data points clustered together are weighted less. - WEIGHTING_DELTA, - - // Weight such that points within a certain horizon are weighed more than those - // outside of that horizon. - WEIGHTING_CENTRAL, - - // Weight such that points older than a certain amount are weighed less. - WEIGHTING_RECENT, - }; - - // Degree must be no greater than Estimator::MAX_DEGREE. - LeastSquaresVelocityTrackerStrategy(uint32_t degree, Weighting weighting = WEIGHTING_NONE); - virtual ~LeastSquaresVelocityTrackerStrategy(); - - virtual void clear(); - virtual void clearPointers(BitSet32 idBits); - virtual void addMovement(nsecs_t eventTime, BitSet32 idBits, - const VelocityTracker::Position* positions); - virtual bool getEstimator(uint32_t id, VelocityTracker::Estimator* outEstimator) const; - -private: - // Sample horizon. - // We don't use too much history by default since we want to react to quick - // changes in direction. - static const nsecs_t HORIZON = 100 * 1000000; // 100 ms - - // Number of samples to keep. - static const uint32_t HISTORY_SIZE = 20; - - struct Movement { - nsecs_t eventTime; - BitSet32 idBits; - VelocityTracker::Position positions[MAX_POINTERS]; - - inline const VelocityTracker::Position& getPosition(uint32_t id) const { - return positions[idBits.getIndexOfBit(id)]; - } - }; - - float chooseWeight(uint32_t index) const; - - const uint32_t mDegree; - const Weighting mWeighting; - uint32_t mIndex; - Movement mMovements[HISTORY_SIZE]; -}; - - -/* - * Velocity tracker algorithm that uses an IIR filter. - */ -class IntegratingVelocityTrackerStrategy : public VelocityTrackerStrategy { -public: - // Degree must be 1 or 2. - IntegratingVelocityTrackerStrategy(uint32_t degree); - ~IntegratingVelocityTrackerStrategy(); - - virtual void clear(); - virtual void clearPointers(BitSet32 idBits); - virtual void addMovement(nsecs_t eventTime, BitSet32 idBits, - const VelocityTracker::Position* positions); - virtual bool getEstimator(uint32_t id, VelocityTracker::Estimator* outEstimator) const; - -private: - // Current state estimate for a particular pointer. - struct State { - nsecs_t updateTime; - uint32_t degree; - - float xpos, xvel, xaccel; - float ypos, yvel, yaccel; - }; - - const uint32_t mDegree; - BitSet32 mPointerIdBits; - State mPointerState[MAX_POINTER_ID + 1]; - - void initState(State& state, nsecs_t eventTime, float xpos, float ypos) const; - void updateState(State& state, nsecs_t eventTime, float xpos, float ypos) const; - void populateEstimator(const State& state, VelocityTracker::Estimator* outEstimator) const; -}; - - -/* - * Velocity tracker strategy used prior to ICS. - */ -class LegacyVelocityTrackerStrategy : public VelocityTrackerStrategy { -public: - LegacyVelocityTrackerStrategy(); - virtual ~LegacyVelocityTrackerStrategy(); - - virtual void clear(); - virtual void clearPointers(BitSet32 idBits); - virtual void addMovement(nsecs_t eventTime, BitSet32 idBits, - const VelocityTracker::Position* positions); - virtual bool getEstimator(uint32_t id, VelocityTracker::Estimator* outEstimator) const; - -private: - // Oldest sample to consider when calculating the velocity. - static const nsecs_t HORIZON = 200 * 1000000; // 100 ms - - // Number of samples to keep. - static const uint32_t HISTORY_SIZE = 20; - - // The minimum duration between samples when estimating velocity. - static const nsecs_t MIN_DURATION = 10 * 1000000; // 10 ms - - struct Movement { - nsecs_t eventTime; - BitSet32 idBits; - VelocityTracker::Position positions[MAX_POINTERS]; - - inline const VelocityTracker::Position& getPosition(uint32_t id) const { - return positions[idBits.getIndexOfBit(id)]; - } - }; - - uint32_t mIndex; - Movement mMovements[HISTORY_SIZE]; -}; - -} // namespace android - -#endif // _LIBINPUT_VELOCITY_TRACKER_H diff --git a/phonelibs/android_frameworks_native/include/input/VirtualKeyMap.h b/phonelibs/android_frameworks_native/include/input/VirtualKeyMap.h deleted file mode 100644 index e245ead6..00000000 --- a/phonelibs/android_frameworks_native/include/input/VirtualKeyMap.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Copyright (C) 2010 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef _LIBINPUT_VIRTUAL_KEY_MAP_H -#define _LIBINPUT_VIRTUAL_KEY_MAP_H - -#include - -#include -#include -#include -#include -#include -#include - -namespace android { - -/* Describes a virtual key. */ -struct VirtualKeyDefinition { - int32_t scanCode; - - // configured position data, specified in display coords - int32_t centerX; - int32_t centerY; - int32_t width; - int32_t height; -}; - - -/** - * Describes a collection of virtual keys on a touch screen in terms of - * virtual scan codes and hit rectangles. - * - * This object is immutable after it has been loaded. - */ -class VirtualKeyMap { -public: - ~VirtualKeyMap(); - - static status_t load(const String8& filename, VirtualKeyMap** outMap); - - inline const Vector& getVirtualKeys() const { - return mVirtualKeys; - } - -private: - class Parser { - VirtualKeyMap* mMap; - Tokenizer* mTokenizer; - - public: - Parser(VirtualKeyMap* map, Tokenizer* tokenizer); - ~Parser(); - status_t parse(); - - private: - bool consumeFieldDelimiterAndSkipWhitespace(); - bool parseNextIntField(int32_t* outValue); - }; - - Vector mVirtualKeys; - - VirtualKeyMap(); -}; - -} // namespace android - -#endif // _LIBINPUT_KEY_CHARACTER_MAP_H diff --git a/phonelibs/android_frameworks_native/include/media/drm/DrmAPI.h b/phonelibs/android_frameworks_native/include/media/drm/DrmAPI.h deleted file mode 100644 index 272881b9..00000000 --- a/phonelibs/android_frameworks_native/include/media/drm/DrmAPI.h +++ /dev/null @@ -1,419 +0,0 @@ -/* - * Copyright (C) 2013 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef DRM_API_H_ -#define DRM_API_H_ - -#include -#include -#include -#include -#include -#include -#include - -// Loadable DrmEngine shared libraries should define the entry points -// createDrmFactory and createCryptoFactory as shown below: -// -// extern "C" { -// extern android::DrmFactory *createDrmFactory(); -// extern android::CryptoFactory *createCryptoFactory(); -// } - -namespace android { - - class DrmPlugin; - class DrmPluginListener; - - // DRMs are implemented in DrmEngine plugins, which are dynamically - // loadable shared libraries that implement the entry points - // createDrmFactory and createCryptoFactory. createDrmFactory - // constructs and returns an instance of a DrmFactory object. Similarly, - // createCryptoFactory creates an instance of a CryptoFactory object. - // When a MediaCrypto or MediaDrm object needs to be constructed, all - // available DrmEngines present in the plugins directory on the device - // are scanned for a matching DrmEngine that can support the crypto - // scheme. When a match is found, the DrmEngine's createCryptoPlugin and - // createDrmPlugin methods are used to create CryptoPlugin or - // DrmPlugin instances to support that DRM scheme. - - class DrmFactory { - public: - DrmFactory() {} - virtual ~DrmFactory() {} - - // DrmFactory::isCryptoSchemeSupported can be called to determine - // if the plugin factory is able to construct plugins that support a - // given crypto scheme, which is specified by a UUID. - virtual bool isCryptoSchemeSupported(const uint8_t uuid[16]) = 0; - - // DrmFactory::isContentTypeSupported can be called to determine - // if the plugin factory is able to construct plugins that support a - // given media container format specified by mimeType - virtual bool isContentTypeSupported(const String8 &mimeType) = 0; - - // Construct a DrmPlugin for the crypto scheme specified by UUID. - virtual status_t createDrmPlugin( - const uint8_t uuid[16], DrmPlugin **plugin) = 0; - - private: - DrmFactory(const DrmFactory &); - DrmFactory &operator=(const DrmFactory &); - }; - - class DrmPlugin { - public: - enum EventType { - kDrmPluginEventProvisionRequired = 1, - kDrmPluginEventKeyNeeded, - kDrmPluginEventKeyExpired, - kDrmPluginEventVendorDefined, - kDrmPluginEventSessionReclaimed, - kDrmPluginEventExpirationUpdate, - kDrmPluginEventKeysChange, - }; - - // Drm keys can be for offline content or for online streaming. - // Offline keys are persisted on the device and may be used when the device - // is disconnected from the network. The Release type is used to request - // that offline keys be no longer restricted to offline use. - enum KeyType { - kKeyType_Offline, - kKeyType_Streaming, - kKeyType_Release - }; - - // Enumerate KeyRequestTypes to allow an app to determine the - // type of a key request returned from getKeyRequest. - enum KeyRequestType { - kKeyRequestType_Unknown, - kKeyRequestType_Initial, - kKeyRequestType_Renewal, - kKeyRequestType_Release - }; - - // Enumerate KeyStatusTypes which indicate the state of a key - enum KeyStatusType - { - kKeyStatusType_Usable, - kKeyStatusType_Expired, - kKeyStatusType_OutputNotAllowed, - kKeyStatusType_StatusPending, - kKeyStatusType_InternalError - }; - - // Used by sendKeysChange to report the usability status of each - // key to the app. - struct KeyStatus - { - Vector mKeyId; - KeyStatusType mType; - }; - - DrmPlugin() {} - virtual ~DrmPlugin() {} - - // Open a new session with the DrmPlugin object. A session ID is returned - // in the sessionId parameter. - virtual status_t openSession(Vector &sessionId) = 0; - - // Close a session on the DrmPlugin object. - virtual status_t closeSession(Vector const &sessionId) = 0; - - // A key request/response exchange occurs between the app and a License - // Server to obtain the keys required to decrypt the content. getKeyRequest() - // is used to obtain an opaque key request blob that is delivered to the - // license server. - // - // The scope parameter may be a sessionId or a keySetId, depending on the - // specified keyType. When the keyType is kKeyType_Offline or - // kKeyType_Streaming, scope should be set to the sessionId the keys will be - // provided to. When the keyType is kKeyType_Release, scope should be set to - // the keySetId of the keys being released. Releasing keys from a device - // invalidates them for all sessions. - // - // The init data passed to getKeyRequest is container-specific and its - // meaning is interpreted based on the mime type provided in the mimeType - // parameter to getKeyRequest. It could contain, for example, the content - // ID, key ID or other data obtained from the content metadata that is required - // in generating the key request. Init may be null when keyType is - // kKeyType_Release. - // - // mimeType identifies the mime type of the content - // - // keyType specifies if the keys are to be used for streaming or offline content - // - // optionalParameters are included in the key request message to allow a - // client application to provide additional message parameters to the server. - // - // If successful, the opaque key request blob is returned to the caller. - virtual status_t - getKeyRequest(Vector const &scope, - Vector const &initData, - String8 const &mimeType, KeyType keyType, - KeyedVector const &optionalParameters, - Vector &request, String8 &defaultUrl, - KeyRequestType *keyRequestType) = 0; - - // - // After a key response is received by the app, it is provided to the - // Drm plugin using provideKeyResponse. - // - // scope may be a sessionId or a keySetId depending on the type of the - // response. Scope should be set to the sessionId when the response is - // for either streaming or offline key requests. Scope should be set to the - // keySetId when the response is for a release request. - // - // When the response is for an offline key request, a keySetId is returned - // in the keySetId vector parameter that can be used to later restore the - // keys to a new session with the method restoreKeys. When the response is - // for a streaming or release request, no keySetId is returned. - // - virtual status_t provideKeyResponse(Vector const &scope, - Vector const &response, - Vector &keySetId) = 0; - - // Remove the current keys from a session - virtual status_t removeKeys(Vector const &sessionId) = 0; - - // Restore persisted offline keys into a new session. keySetId identifies - // the keys to load, obtained from a prior call to provideKeyResponse(). - virtual status_t restoreKeys(Vector const &sessionId, - Vector const &keySetId) = 0; - - // Request an informative description of the license for the session. The status - // is in the form of {name, value} pairs. Since DRM license policies vary by - // vendor, the specific status field names are determined by each DRM vendor. - // Refer to your DRM provider documentation for definitions of the field names - // for a particular DrmEngine. - virtual status_t - queryKeyStatus(Vector const &sessionId, - KeyedVector &infoMap) const = 0; - - // A provision request/response exchange occurs between the app and a - // provisioning server to retrieve a device certificate. getProvisionRequest - // is used to obtain an opaque key request blob that is delivered to the - // provisioning server. - // - // If successful, the opaque provision request blob is returned to the caller. - virtual status_t getProvisionRequest(String8 const &cert_type, - String8 const &cert_authority, - Vector &request, - String8 &defaultUrl) = 0; - - // After a provision response is received by the app, it is provided to the - // Drm plugin using provideProvisionResponse. - virtual status_t provideProvisionResponse(Vector const &response, - Vector &certificate, - Vector &wrapped_key) = 0; - - // Remove device provisioning. - virtual status_t unprovisionDevice() = 0; - - // A means of enforcing the contractual requirement for a concurrent stream - // limit per subscriber across devices is provided via SecureStop. SecureStop - // is a means of securely monitoring the lifetime of sessions. Since playback - // on a device can be interrupted due to reboot, power failure, etc. a means - // of persisting the lifetime information on the device is needed. - // - // A signed version of the sessionID is written to persistent storage on the - // device when each MediaCrypto object is created. The sessionID is signed by - // the device private key to prevent tampering. - // - // In the normal case, playback will be completed, the session destroyed and - // the Secure Stops will be queried. The App queries secure stops and forwards - // the secure stop message to the server which verifies the signature and - // notifies the server side database that the session destruction has been - // confirmed. The persisted record on the client is only removed after positive - // confirmation that the server received the message using releaseSecureStops(). - virtual status_t getSecureStops(List > &secureStops) = 0; - virtual status_t getSecureStop(Vector const &ssid, Vector &secureStop) = 0; - virtual status_t releaseSecureStops(Vector const &ssRelease) = 0; - virtual status_t releaseAllSecureStops() = 0; - - // Read a property value given the device property string. There are a few forms - // of property access methods, depending on the data type returned. - // Since DRM plugin properties may vary, additional field names may be defined - // by each DRM vendor. Refer to your DRM provider documentation for definitions - // of its additional field names. - // - // Standard values are: - // "vendor" [string] identifies the maker of the plugin - // "version" [string] identifies the version of the plugin - // "description" [string] describes the plugin - // 'deviceUniqueId' [byte array] The device unique identifier is established - // during device provisioning and provides a means of uniquely identifying - // each device. - virtual status_t getPropertyString(String8 const &name, String8 &value ) const = 0; - virtual status_t getPropertyByteArray(String8 const &name, - Vector &value ) const = 0; - - // Write a property value given the device property string. There are a few forms - // of property setting methods, depending on the data type. - // Since DRM plugin properties may vary, additional field names may be defined - // by each DRM vendor. Refer to your DRM provider documentation for definitions - // of its field names. - virtual status_t setPropertyString(String8 const &name, - String8 const &value ) = 0; - virtual status_t setPropertyByteArray(String8 const &name, - Vector const &value ) = 0; - - // The following methods implement operations on a CryptoSession to support - // encrypt, decrypt, sign verify operations on operator-provided - // session keys. - - // - // The algorithm string conforms to JCA Standard Names for Cipher - // Transforms and is case insensitive. For example "AES/CBC/PKCS5Padding". - // - // Return OK if the algorithm is supported, otherwise return BAD_VALUE - // - virtual status_t setCipherAlgorithm(Vector const &sessionId, - String8 const &algorithm) = 0; - - // - // The algorithm string conforms to JCA Standard Names for Mac - // Algorithms and is case insensitive. For example "HmacSHA256". - // - // Return OK if the algorithm is supported, otherwise return BAD_VALUE - // - virtual status_t setMacAlgorithm(Vector const &sessionId, - String8 const &algorithm) = 0; - - // Encrypt the provided input buffer with the cipher algorithm - // specified by setCipherAlgorithm and the key selected by keyId, - // and return the encrypted data. - virtual status_t encrypt(Vector const &sessionId, - Vector const &keyId, - Vector const &input, - Vector const &iv, - Vector &output) = 0; - - // Decrypt the provided input buffer with the cipher algorithm - // specified by setCipherAlgorithm and the key selected by keyId, - // and return the decrypted data. - virtual status_t decrypt(Vector const &sessionId, - Vector const &keyId, - Vector const &input, - Vector const &iv, - Vector &output) = 0; - - // Compute a signature on the provided message using the mac algorithm - // specified by setMacAlgorithm and the key selected by keyId, - // and return the signature. - virtual status_t sign(Vector const &sessionId, - Vector const &keyId, - Vector const &message, - Vector &signature) = 0; - - // Compute a signature on the provided message using the mac algorithm - // specified by setMacAlgorithm and the key selected by keyId, - // and compare with the expected result. Set result to true or - // false depending on the outcome. - virtual status_t verify(Vector const &sessionId, - Vector const &keyId, - Vector const &message, - Vector const &signature, - bool &match) = 0; - - - // Compute an RSA signature on the provided message using the algorithm - // specified by algorithm. - virtual status_t signRSA(Vector const &sessionId, - String8 const &algorithm, - Vector const &message, - Vector const &wrapped_key, - Vector &signature) = 0; - - - status_t setListener(const sp& listener) { - Mutex::Autolock lock(mEventLock); - mListener = listener; - return OK; - } - - protected: - // Plugins call these methods to deliver events to the java app - void sendEvent(EventType eventType, int extra, - Vector const *sessionId, - Vector const *data); - - void sendExpirationUpdate(Vector const *sessionId, - int64_t expiryTimeInMS); - - void sendKeysChange(Vector const *sessionId, - Vector const *keyStatusList, - bool hasNewUsableKey); - - private: - Mutex mEventLock; - sp mListener; - - DISALLOW_EVIL_CONSTRUCTORS(DrmPlugin); - }; - - class DrmPluginListener: virtual public RefBase - { - public: - virtual void sendEvent(DrmPlugin::EventType eventType, int extra, - Vector const *sessionId, - Vector const *data) = 0; - - virtual void sendExpirationUpdate(Vector const *sessionId, - int64_t expiryTimeInMS) = 0; - - virtual void sendKeysChange(Vector const *sessionId, - Vector const *keyStatusList, - bool hasNewUsableKey) = 0; - }; - - inline void DrmPlugin::sendEvent(EventType eventType, int extra, - Vector const *sessionId, - Vector const *data) { - mEventLock.lock(); - sp listener = mListener; - mEventLock.unlock(); - - if (listener != NULL) { - listener->sendEvent(eventType, extra, sessionId, data); - } - } - - inline void DrmPlugin::sendExpirationUpdate(Vector const *sessionId, - int64_t expiryTimeInMS) { - mEventLock.lock(); - sp listener = mListener; - mEventLock.unlock(); - - if (listener != NULL) { - listener->sendExpirationUpdate(sessionId, expiryTimeInMS); - } - } - - inline void DrmPlugin::sendKeysChange(Vector const *sessionId, - Vector const *keyStatusList, - bool hasNewUsableKey) { - mEventLock.lock(); - sp listener = mListener; - mEventLock.unlock(); - - if (listener != NULL) { - listener->sendKeysChange(sessionId, keyStatusList, hasNewUsableKey); - } - } -} // namespace android - -#endif // DRM_API_H_ diff --git a/phonelibs/android_frameworks_native/include/media/editor/II420ColorConverter.h b/phonelibs/android_frameworks_native/include/media/editor/II420ColorConverter.h deleted file mode 100644 index 33af61ff..00000000 --- a/phonelibs/android_frameworks_native/include/media/editor/II420ColorConverter.h +++ /dev/null @@ -1,126 +0,0 @@ -/* - * Copyright (C) 2011 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef II420_COLOR_CONVERTER_H - -#define II420_COLOR_CONVERTER_H - -#include -#include - -#ifdef __cplusplus -extern "C" { -#endif - -typedef struct II420ColorConverter { - - /* - * getDecoderOutputFormat - * Returns the color format (OMX_COLOR_FORMATTYPE) of the decoder output. - * If it is I420 (OMX_COLOR_FormatYUV420Planar), no conversion is needed, - * and convertDecoderOutputToI420() can be a no-op. - */ - int (*getDecoderOutputFormat)(); - - /* - * convertDecoderOutputToI420 - * @Desc Converts from the decoder output format to I420 format. - * @note Caller (e.g. VideoEditor) owns the buffers - * @param decoderBits (IN) Pointer to the buffer contains decoder output - * @param decoderWidth (IN) Buffer width, as reported by the decoder - * metadata (kKeyWidth) - * @param decoderHeight (IN) Buffer height, as reported by the decoder - * metadata (kKeyHeight) - * @param decoderRect (IN) The rectangle of the actual frame, as - * reported by decoder metadata (kKeyCropRect) - * @param dstBits (OUT) Pointer to the output I420 buffer - * @return -1 Any error - * @return 0 No Error - */ - int (*convertDecoderOutputToI420)( - void* decoderBits, int decoderWidth, int decoderHeight, - ARect decoderRect, void* dstBits); - - /* - * getEncoderIntputFormat - * Returns the color format (OMX_COLOR_FORMATTYPE) of the encoder input. - * If it is I420 (OMX_COLOR_FormatYUV420Planar), no conversion is needed, - * and convertI420ToEncoderInput() and getEncoderInputBufferInfo() can - * be no-ops. - */ - int (*getEncoderInputFormat)(); - - /* convertI420ToEncoderInput - * @Desc This function converts from I420 to the encoder input format - * @note Caller (e.g. VideoEditor) owns the buffers - * @param srcBits (IN) Pointer to the input I420 buffer - * @param srcWidth (IN) Width of the I420 frame - * @param srcHeight (IN) Height of the I420 frame - * @param encoderWidth (IN) Encoder buffer width, as calculated by - * getEncoderBufferInfo() - * @param encoderHeight (IN) Encoder buffer height, as calculated by - * getEncoderBufferInfo() - * @param encoderRect (IN) Rect coordinates of the actual frame inside - * the encoder buffer, as calculated by - * getEncoderBufferInfo(). - * @param encoderBits (OUT) Pointer to the output buffer. The size of - * this buffer is calculated by - * getEncoderBufferInfo() - * @return -1 Any error - * @return 0 No Error - */ - int (*convertI420ToEncoderInput)( - void* srcBits, int srcWidth, int srcHeight, - int encoderWidth, int encoderHeight, ARect encoderRect, - void* encoderBits); - - /* getEncoderInputBufferInfo - * @Desc This function returns metadata for the encoder input buffer - * based on the actual I420 frame width and height. - * @note This API should be be used to obtain the necessary information - * before calling convertI420ToEncoderInput(). - * VideoEditor knows only the width and height of the I420 buffer, - * but it also needs know the width, height, and size of the - * encoder input buffer. The encoder input buffer width and height - * are used to set the metadata for the encoder. - * @param srcWidth (IN) Width of the I420 frame - * @param srcHeight (IN) Height of the I420 frame - * @param encoderWidth (OUT) Encoder buffer width needed - * @param encoderHeight (OUT) Encoder buffer height needed - * @param encoderRect (OUT) Rect coordinates of the actual frame inside - * the encoder buffer - * @param encoderBufferSize (OUT) The size of the buffer that need to be - * allocated by the caller before invoking - * convertI420ToEncoderInput(). - * @return -1 Any error - * @return 0 No Error - */ - int (*getEncoderInputBufferInfo)( - int srcWidth, int srcHeight, - int* encoderWidth, int* encoderHeight, - ARect* encoderRect, int* encoderBufferSize); - -} II420ColorConverter; - -/* The only function that the shared library needs to expose: It fills the - function pointers in II420ColorConverter */ -void getI420ColorConverter(II420ColorConverter *converter); - -#if defined(__cplusplus) -} -#endif - -#endif // II420_COLOR_CONVERTER_H diff --git a/phonelibs/android_frameworks_native/include/media/hardware/CryptoAPI.h b/phonelibs/android_frameworks_native/include/media/hardware/CryptoAPI.h deleted file mode 100644 index 3e3257f9..00000000 --- a/phonelibs/android_frameworks_native/include/media/hardware/CryptoAPI.h +++ /dev/null @@ -1,115 +0,0 @@ -/* - * Copyright (C) 2012 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#include -#include -#include - -#ifndef CRYPTO_API_H_ - -#define CRYPTO_API_H_ - -namespace android { - -struct AString; -struct CryptoPlugin; - -struct CryptoFactory { - CryptoFactory() {} - virtual ~CryptoFactory() {} - - virtual bool isCryptoSchemeSupported(const uint8_t uuid[16]) const = 0; - - virtual status_t createPlugin( - const uint8_t uuid[16], const void *data, size_t size, - CryptoPlugin **plugin) = 0; - -private: - CryptoFactory(const CryptoFactory &); - CryptoFactory &operator=(const CryptoFactory &); -}; - -struct CryptoPlugin { - enum Mode { - kMode_Unencrypted = 0, - kMode_AES_CTR = 1, - - // Neither key nor iv are being used in this mode. - // Each subsample is encrypted w/ an iv of all zeroes. - kMode_AES_WV = 2, // FIX constant - }; - - struct SubSample { - uint32_t mNumBytesOfClearData; - uint32_t mNumBytesOfEncryptedData; - }; - - CryptoPlugin() {} - virtual ~CryptoPlugin() {} - - // If this method returns false, a non-secure decoder will be used to - // decode the data after decryption. The decrypt API below will have - // to support insecure decryption of the data (secure = false) for - // media data of the given mime type. - virtual bool requiresSecureDecoderComponent(const char *mime) const = 0; - - // To implement resolution constraints, the crypto plugin needs to know - // the resolution of the video being decrypted. The media player should - // call this method when the resolution is determined and any time it - // is subsequently changed. - - virtual void notifyResolution(uint32_t /* width */, uint32_t /* height */) {} - - // A MediaDrm session may be associated with a MediaCrypto session. The - // associated MediaDrm session is used to load decryption keys - // into the crypto/drm plugin. The keys are then referenced by key-id - // in the 'key' parameter to the decrypt() method. - // Should return NO_ERROR on success, ERROR_DRM_SESSION_NOT_OPENED if - // the session is not opened and a code from MediaErrors.h otherwise. - virtual status_t setMediaDrmSession(const Vector & /*sessionId */) { - return ERROR_UNSUPPORTED; - } - - // If the error returned falls into the range - // ERROR_DRM_VENDOR_MIN..ERROR_DRM_VENDOR_MAX, errorDetailMsg should be - // filled in with an appropriate string. - // At the java level these special errors will then trigger a - // MediaCodec.CryptoException that gives clients access to both - // the error code and the errorDetailMsg. - // Returns a non-negative result to indicate the number of bytes written - // to the dstPtr, or a negative result to indicate an error. - virtual ssize_t decrypt( - bool secure, - const uint8_t key[16], - const uint8_t iv[16], - Mode mode, - const void *srcPtr, - const SubSample *subSamples, size_t numSubSamples, - void *dstPtr, - AString *errorDetailMsg) = 0; - -private: - CryptoPlugin(const CryptoPlugin &); - CryptoPlugin &operator=(const CryptoPlugin &); -}; - -} // namespace android - -extern "C" { - extern android::CryptoFactory *createCryptoFactory(); -} - -#endif // CRYPTO_API_H_ diff --git a/phonelibs/android_frameworks_native/include/media/hardware/HDCPAPI.h b/phonelibs/android_frameworks_native/include/media/hardware/HDCPAPI.h deleted file mode 100644 index 3a53e9fc..00000000 --- a/phonelibs/android_frameworks_native/include/media/hardware/HDCPAPI.h +++ /dev/null @@ -1,164 +0,0 @@ -/* - * Copyright (C) 2012 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef HDCP_API_H_ - -#define HDCP_API_H_ - -#include -#include - -namespace android { - -// Two different kinds of modules are covered under the same HDCPModule -// structure below, a module either implements decryption or encryption. -struct HDCPModule { - typedef void (*ObserverFunc)(void *cookie, int msg, int ext1, int ext2); - - // The msg argument in calls to the observer notification function. - enum { - // Sent in response to a call to "HDCPModule::initAsync" once - // initialization has either been successfully completed, - // i.e. the HDCP session is now fully setup (AKE, Locality Check, - // SKE and any authentication with repeaters completed) or failed. - // ext1 should be a suitable error code (status_t), ext2 is - // unused for ENCRYPTION and in the case of HDCP_INITIALIZATION_COMPLETE - // holds the local TCP port the module is listening on. - HDCP_INITIALIZATION_COMPLETE, - HDCP_INITIALIZATION_FAILED, - - // Sent upon completion of a call to "HDCPModule::shutdownAsync". - // ext1 should be a suitable error code, ext2 is unused. - HDCP_SHUTDOWN_COMPLETE, - HDCP_SHUTDOWN_FAILED, - - HDCP_UNAUTHENTICATED_CONNECTION, - HDCP_UNAUTHORIZED_CONNECTION, - HDCP_REVOKED_CONNECTION, - HDCP_TOPOLOGY_EXECEEDED, - HDCP_UNKNOWN_ERROR, - - // DECRYPTION only: Indicates that a client has successfully connected, - // a secure session established and the module is ready to accept - // future calls to "decrypt". - HDCP_SESSION_ESTABLISHED, - }; - - // HDCPModule capability bit masks - enum { - // HDCP_CAPS_ENCRYPT: mandatory, meaning the HDCP module can encrypt - // from an input byte-array buffer to an output byte-array buffer - HDCP_CAPS_ENCRYPT = (1 << 0), - // HDCP_CAPS_ENCRYPT_NATIVE: the HDCP module supports encryption from - // a native buffer to an output byte-array buffer. The format of the - // input native buffer is specific to vendor's encoder implementation. - // It is the same format as that used by the encoder when - // "storeMetaDataInBuffers" extension is enabled on its output port. - HDCP_CAPS_ENCRYPT_NATIVE = (1 << 1), - }; - - // Module can call the notification function to signal completion/failure - // of asynchronous operations (such as initialization) or out of band - // events. - HDCPModule(void *cookie, ObserverFunc observerNotify) {}; - - virtual ~HDCPModule() {}; - - // ENCRYPTION: Request to setup an HDCP session with the host specified - // by addr and listening on the specified port. - // DECRYPTION: Request to setup an HDCP session, addr is the interface - // address the module should bind its socket to. port will be 0. - // The module will pick the port to listen on itself and report its choice - // in the "ext2" argument of the HDCP_INITIALIZATION_COMPLETE callback. - virtual status_t initAsync(const char *addr, unsigned port) = 0; - - // Request to shutdown the active HDCP session. - virtual status_t shutdownAsync() = 0; - - // Returns the capability bitmask of this HDCP session. - virtual uint32_t getCaps() { - return HDCP_CAPS_ENCRYPT; - } - - // ENCRYPTION only: - // Encrypt data according to the HDCP spec. "size" bytes of data are - // available at "inData" (virtual address), "size" may not be a multiple - // of 128 bits (16 bytes). An equal number of encrypted bytes should be - // written to the buffer at "outData" (virtual address). - // This operation is to be synchronous, i.e. this call does not return - // until outData contains size bytes of encrypted data. - // streamCTR will be assigned by the caller (to 0 for the first PES stream, - // 1 for the second and so on) - // inputCTR _will_be_maintained_by_the_callee_ for each PES stream. - virtual status_t encrypt( - const void *inData, size_t size, uint32_t streamCTR, - uint64_t *outInputCTR, void *outData) { - return INVALID_OPERATION; - } - - // Encrypt data according to the HDCP spec. "size" bytes of data starting - // at location "offset" are available in "buffer" (buffer handle). "size" - // may not be a multiple of 128 bits (16 bytes). An equal number of - // encrypted bytes should be written to the buffer at "outData" (virtual - // address). This operation is to be synchronous, i.e. this call does not - // return until outData contains size bytes of encrypted data. - // streamCTR will be assigned by the caller (to 0 for the first PES stream, - // 1 for the second and so on) - // inputCTR _will_be_maintained_by_the_callee_ for each PES stream. - virtual status_t encryptNative( - buffer_handle_t buffer, size_t offset, size_t size, - uint32_t streamCTR, uint64_t *outInputCTR, void *outData) { - return INVALID_OPERATION; - } - // DECRYPTION only: - // Decrypt data according to the HDCP spec. - // "size" bytes of encrypted data are available at "inData" - // (virtual address), "size" may not be a multiple of 128 bits (16 bytes). - // An equal number of decrypted bytes should be written to the buffer - // at "outData" (virtual address). - // This operation is to be synchronous, i.e. this call does not return - // until outData contains size bytes of decrypted data. - // Both streamCTR and inputCTR will be provided by the caller. - virtual status_t decrypt( - const void *inData, size_t size, - uint32_t streamCTR, uint64_t inputCTR, - void *outData) { - return INVALID_OPERATION; - } - -private: - HDCPModule(const HDCPModule &); - HDCPModule &operator=(const HDCPModule &); -}; - -} // namespace android - -// A shared library exporting the following methods should be included to -// support HDCP functionality. The shared library must be called -// "libstagefright_hdcp.so", it will be dynamically loaded into the -// mediaserver process. -extern "C" { - // Create a module for ENCRYPTION. - extern android::HDCPModule *createHDCPModule( - void *cookie, android::HDCPModule::ObserverFunc); - - // Create a module for DECRYPTION. - extern android::HDCPModule *createHDCPModuleForDecryption( - void *cookie, android::HDCPModule::ObserverFunc); -} - -#endif // HDCP_API_H_ - diff --git a/phonelibs/android_frameworks_native/include/media/hardware/HardwareAPI.h b/phonelibs/android_frameworks_native/include/media/hardware/HardwareAPI.h deleted file mode 100644 index 1008c22d..00000000 --- a/phonelibs/android_frameworks_native/include/media/hardware/HardwareAPI.h +++ /dev/null @@ -1,288 +0,0 @@ -/* - * Copyright (C) 2009 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef HARDWARE_API_H_ - -#define HARDWARE_API_H_ - -#include -#include -#include -#include - -#include - -namespace android { - -// A pointer to this struct is passed to the OMX_SetParameter when the extension -// index for the 'OMX.google.android.index.enableAndroidNativeBuffers' extension -// is given. -// -// When Android native buffer use is disabled for a port (the default state), -// the OMX node should operate as normal, and expect UseBuffer calls to set its -// buffers. This is the mode that will be used when CPU access to the buffer is -// required. -// -// When Android native buffer use has been enabled for a given port, the video -// color format for the port is to be interpreted as an Android pixel format -// rather than an OMX color format. Enabling Android native buffers may also -// change how the component receives the native buffers. If store-metadata-mode -// is enabled on the port, the component will receive the buffers as specified -// in the section below. Otherwise, unless the node supports the -// 'OMX.google.android.index.useAndroidNativeBuffer2' extension, it should -// expect to receive UseAndroidNativeBuffer calls (via OMX_SetParameter) rather -// than UseBuffer calls for that port. -struct EnableAndroidNativeBuffersParams { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_BOOL enable; -}; - -// A pointer to this struct is passed to OMX_SetParameter() when the extension index -// "OMX.google.android.index.storeMetaDataInBuffers" or -// "OMX.google.android.index.storeANWBufferInMetadata" is given. -// -// When meta data is stored in the video buffers passed between OMX clients -// and OMX components, interpretation of the buffer data is up to the -// buffer receiver, and the data may or may not be the actual video data, but -// some information helpful for the receiver to locate the actual data. -// The buffer receiver thus needs to know how to interpret what is stored -// in these buffers, with mechanisms pre-determined externally. How to -// interpret the meta data is outside of the scope of this parameter. -// -// Currently, this is used to pass meta data from video source (camera component, for instance) to -// video encoder to avoid memcpying of input video frame data, as well as to pass dynamic output -// buffer to video decoder. To do this, bStoreMetaData is set to OMX_TRUE. -// -// If bStoreMetaData is set to false, real YUV frame data will be stored in input buffers, and -// the output buffers contain either real YUV frame data, or are themselves native handles as -// directed by enable/use-android-native-buffer parameter settings. -// In addition, if no OMX_SetParameter() call is made on a port with the corresponding extension -// index, the component should not assume that the client is not using metadata mode for the port. -// -// If the component supports this using the "OMX.google.android.index.storeANWBufferInMetadata" -// extension and bStoreMetaData is set to OMX_TRUE, data is passed using the VideoNativeMetadata -// layout as defined below. Each buffer will be accompanied by a fence. The fence must signal -// before the buffer can be used (e.g. read from or written into). When returning such buffer to -// the client, component must provide a new fence that must signal before the returned buffer can -// be used (e.g. read from or written into). The component owns the incoming fenceFd, and must close -// it when fence has signaled. The client will own and close the returned fence file descriptor. -// -// If the component supports this using the "OMX.google.android.index.storeMetaDataInBuffers" -// extension and bStoreMetaData is set to OMX_TRUE, data is passed using VideoGrallocMetadata -// (the layout of which is the VideoGrallocMetadata defined below). Camera input can be also passed -// as "CameraSource", the layout of which is vendor dependent. -// -// Metadata buffers are registered with the component using UseBuffer calls, or can be allocated -// by the component for encoder-metadata-output buffers. -struct StoreMetaDataInBuffersParams { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_BOOL bStoreMetaData; -}; - -// Meta data buffer layout used to transport output frames to the decoder for -// dynamic buffer handling. -struct VideoGrallocMetadata { - MetadataBufferType eType; // must be kMetadataBufferTypeGrallocSource -#ifdef OMX_ANDROID_COMPILE_AS_32BIT_ON_64BIT_PLATFORMS - OMX_PTR pHandle; -#else - buffer_handle_t pHandle; -#endif -}; - -// Legacy name for VideoGrallocMetadata struct. -struct VideoDecoderOutputMetaData : public VideoGrallocMetadata {}; - -struct VideoNativeMetadata { - MetadataBufferType eType; // must be kMetadataBufferTypeANWBuffer -#ifdef OMX_ANDROID_COMPILE_AS_32BIT_ON_64BIT_PLATFORMS - OMX_PTR pBuffer; -#else - struct ANativeWindowBuffer* pBuffer; -#endif - int nFenceFd; // -1 if unused -}; - -// A pointer to this struct is passed to OMX_SetParameter() when the extension -// index "OMX.google.android.index.prepareForAdaptivePlayback" is given. -// -// This method is used to signal a video decoder, that the user has requested -// seamless resolution change support (if bEnable is set to OMX_TRUE). -// nMaxFrameWidth and nMaxFrameHeight are the dimensions of the largest -// anticipated frames in the video. If bEnable is OMX_FALSE, no resolution -// change is expected, and the nMaxFrameWidth/Height fields are unused. -// -// If the decoder supports dynamic output buffers, it may ignore this -// request. Otherwise, it shall request resources in such a way so that it -// avoids full port-reconfiguration (due to output port-definition change) -// during resolution changes. -// -// DO NOT USE THIS STRUCTURE AS IT WILL BE REMOVED. INSTEAD, IMPLEMENT -// METADATA SUPPORT FOR VIDEO DECODERS. -struct PrepareForAdaptivePlaybackParams { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_BOOL bEnable; - OMX_U32 nMaxFrameWidth; - OMX_U32 nMaxFrameHeight; -}; - -// A pointer to this struct is passed to OMX_SetParameter when the extension -// index for the 'OMX.google.android.index.useAndroidNativeBuffer' extension is -// given. This call will only be performed if a prior call was made with the -// 'OMX.google.android.index.enableAndroidNativeBuffers' extension index, -// enabling use of Android native buffers. -struct UseAndroidNativeBufferParams { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_PTR pAppPrivate; - OMX_BUFFERHEADERTYPE **bufferHeader; - const sp& nativeBuffer; -}; - -// A pointer to this struct is passed to OMX_GetParameter when the extension -// index for the 'OMX.google.android.index.getAndroidNativeBufferUsage' -// extension is given. The usage bits returned from this query will be used to -// allocate the Gralloc buffers that get passed to the useAndroidNativeBuffer -// command. -struct GetAndroidNativeBufferUsageParams { - OMX_U32 nSize; // IN - OMX_VERSIONTYPE nVersion; // IN - OMX_U32 nPortIndex; // IN - OMX_U32 nUsage; // OUT -}; - -// An enum OMX_COLOR_FormatAndroidOpaque to indicate an opaque colorformat -// is declared in media/stagefright/openmax/OMX_IVCommon.h -// This will inform the encoder that the actual -// colorformat will be relayed by the GRalloc Buffers. -// OMX_COLOR_FormatAndroidOpaque = 0x7F000001, - -// A pointer to this struct is passed to OMX_SetParameter when the extension -// index for the 'OMX.google.android.index.prependSPSPPSToIDRFrames' extension -// is given. -// A successful result indicates that future IDR frames will be prefixed by -// SPS/PPS. -struct PrependSPSPPSToIDRFramesParams { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_BOOL bEnable; -}; - -// Structure describing a media image (frame) -// Currently only supporting YUV -struct MediaImage { - enum Type { - MEDIA_IMAGE_TYPE_UNKNOWN = 0, - MEDIA_IMAGE_TYPE_YUV, - }; - - enum PlaneIndex { - Y = 0, - U, - V, - MAX_NUM_PLANES - }; - - Type mType; - uint32_t mNumPlanes; // number of planes - uint32_t mWidth; // width of largest plane (unpadded, as in nFrameWidth) - uint32_t mHeight; // height of largest plane (unpadded, as in nFrameHeight) - uint32_t mBitDepth; // useable bit depth - struct PlaneInfo { - uint32_t mOffset; // offset of first pixel of the plane in bytes - // from buffer offset - uint32_t mColInc; // column increment in bytes - uint32_t mRowInc; // row increment in bytes - uint32_t mHorizSubsampling; // subsampling compared to the largest plane - uint32_t mVertSubsampling; // subsampling compared to the largest plane - }; - PlaneInfo mPlane[MAX_NUM_PLANES]; -}; - -// A pointer to this struct is passed to OMX_GetParameter when the extension -// index for the 'OMX.google.android.index.describeColorFormat' -// extension is given. This method can be called from any component state -// other than invalid. The color-format, frame width/height, and stride/ -// slice-height parameters are ones that are associated with a raw video -// port (input or output), but the stride/slice height parameters may be -// incorrect. bUsingNativeBuffers is OMX_TRUE if native android buffers will -// be used (while specifying this color format). -// -// The component shall fill out the MediaImage structure that -// corresponds to the described raw video format, and the potentially corrected -// stride and slice-height info. -// -// The behavior is slightly different if bUsingNativeBuffers is OMX_TRUE, -// though most implementations can ignore this difference. When using native buffers, -// the component may change the configured color format to an optimized format. -// Additionally, when allocating these buffers for flexible usecase, the framework -// will set the SW_READ/WRITE_OFTEN usage flags. In this case (if bUsingNativeBuffers -// is OMX_TRUE), the component shall fill out the MediaImage information for the -// scenario when these SW-readable/writable buffers are locked using gralloc_lock. -// Note, that these buffers may also be locked using gralloc_lock_ycbcr, which must -// be supported for vendor-specific formats. -// -// For non-YUV packed planar/semiplanar image formats, or if bUsingNativeBuffers -// is OMX_TRUE and the component does not support this color format with native -// buffers, the component shall set mNumPlanes to 0, and mType to MEDIA_IMAGE_TYPE_UNKNOWN. -struct DescribeColorFormatParams { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - // input: parameters from OMX_VIDEO_PORTDEFINITIONTYPE - OMX_COLOR_FORMATTYPE eColorFormat; - OMX_U32 nFrameWidth; - OMX_U32 nFrameHeight; - OMX_U32 nStride; - OMX_U32 nSliceHeight; - OMX_BOOL bUsingNativeBuffers; - - // output: fill out the MediaImage fields - MediaImage sMediaImage; -}; - -// A pointer to this struct is passed to OMX_SetParameter or OMX_GetParameter -// when the extension index for the -// 'OMX.google.android.index.configureVideoTunnelMode' extension is given. -// If the extension is supported then tunneled playback mode should be supported -// by the codec. If bTunneled is set to OMX_TRUE then the video decoder should -// operate in "tunneled" mode and output its decoded frames directly to the -// sink. In this case nAudioHwSync is the HW SYNC ID of the audio HAL Output -// stream to sync the video with. If bTunneled is set to OMX_FALSE, "tunneled" -// mode should be disabled and nAudioHwSync should be ignored. -// OMX_GetParameter is used to query tunneling configuration. bTunneled should -// return whether decoder is operating in tunneled mode, and if it is, -// pSidebandWindow should contain the codec allocated sideband window handle. -struct ConfigureVideoTunnelModeParams { - OMX_U32 nSize; // IN - OMX_VERSIONTYPE nVersion; // IN - OMX_U32 nPortIndex; // IN - OMX_BOOL bTunneled; // IN/OUT - OMX_U32 nAudioHwSync; // IN - OMX_PTR pSidebandWindow; // OUT -}; - -} // namespace android - -extern android::OMXPluginBase *createOMXPlugin(); - -#endif // HARDWARE_API_H_ diff --git a/phonelibs/android_frameworks_native/include/media/hardware/MetadataBufferType.h b/phonelibs/android_frameworks_native/include/media/hardware/MetadataBufferType.h deleted file mode 100644 index b7652039..00000000 --- a/phonelibs/android_frameworks_native/include/media/hardware/MetadataBufferType.h +++ /dev/null @@ -1,127 +0,0 @@ -/* - * Copyright (C) 2011 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef METADATA_BUFFER_TYPE_H -#define METADATA_BUFFER_TYPE_H - -#ifdef __cplusplus -extern "C" { -namespace android { -#endif - -/* - * MetadataBufferType defines the type of the metadata buffers that - * can be passed to video encoder component for encoding, via Stagefright - * media recording framework. To see how to work with the metadata buffers - * in media recording framework, please consult HardwareAPI.h - * - * The creator of metadata buffers and video encoder share common knowledge - * on what is actually being stored in these metadata buffers, and - * how the information can be used by the video encoder component - * to locate the actual pixel data as the source input for video - * encoder, plus whatever other information that is necessary. Stagefright - * media recording framework does not need to know anything specific about the - * metadata buffers, except for receving each individual metadata buffer - * as the source input, making a copy of the metadata buffer, and passing the - * copy via OpenMAX API to the video encoder component. - * - * The creator of the metadata buffers must ensure that the first - * 4 bytes in every metadata buffer indicates its buffer type, - * and the rest of the metadata buffer contains the - * actual metadata information. When a video encoder component receives - * a metadata buffer, it uses the first 4 bytes in that buffer to find - * out the type of the metadata buffer, and takes action appropriate - * to that type of metadata buffers (for instance, locate the actual - * pixel data input and then encoding the input data to produce a - * compressed output buffer). - * - * The following shows the layout of a metadata buffer, - * where buffer type is a 4-byte field of MetadataBufferType, - * and the payload is the metadata information. - * - * -------------------------------------------------------------- - * | buffer type | payload | - * -------------------------------------------------------------- - * - */ -typedef enum { - - /* - * kMetadataBufferTypeCameraSource is used to indicate that - * the source of the metadata buffer is the camera component. - */ - kMetadataBufferTypeCameraSource = 0, - - /* - * kMetadataBufferTypeGrallocSource is used to indicate that - * the payload of the metadata buffers can be interpreted as - * a buffer_handle_t. - * So in this case,the metadata that the encoder receives - * will have a byte stream that consists of two parts: - * 1. First, there is an integer indicating that it is a GRAlloc - * source (kMetadataBufferTypeGrallocSource) - * 2. This is followed by the buffer_handle_t that is a handle to the - * GRalloc buffer. The encoder needs to interpret this GRalloc handle - * and encode the frames. - * -------------------------------------------------------------- - * | kMetadataBufferTypeGrallocSource | buffer_handle_t buffer | - * -------------------------------------------------------------- - * - * See the VideoGrallocMetadata structure. - */ - kMetadataBufferTypeGrallocSource = 1, - - /* - * kMetadataBufferTypeGraphicBuffer is used to indicate that - * the payload of the metadata buffers can be interpreted as - * an ANativeWindowBuffer, and that a fence is provided. - * - * In this case, the metadata will have a byte stream that consists of three parts: - * 1. First, there is an integer indicating that the metadata - * contains an ANativeWindowBuffer (kMetadataBufferTypeANWBuffer) - * 2. This is followed by the pointer to the ANativeWindowBuffer. - * Codec must not free this buffer as it does not actually own this buffer. - * 3. Finally, there is an integer containing a fence file descriptor. - * The codec must wait on the fence before encoding or decoding into this - * buffer. When the buffer is returned, codec must replace this file descriptor - * with a new fence, that will be waited on before the buffer is replaced - * (encoder) or read (decoder). - * --------------------------------- - * | kMetadataBufferTypeANWBuffer | - * --------------------------------- - * | ANativeWindowBuffer *buffer | - * --------------------------------- - * | int fenceFd | - * --------------------------------- - * - * See the VideoNativeMetadata structure. - */ - kMetadataBufferTypeANWBuffer = 2, - - /* This value is used by framework, but is never used inside a metadata buffer */ - kMetadataBufferTypeInvalid = -1, - - - // Add more here... - -} MetadataBufferType; - -#ifdef __cplusplus -} // namespace android -} -#endif - -#endif // METADATA_BUFFER_TYPE_H diff --git a/phonelibs/android_frameworks_native/include/media/hardware/OMXPluginBase.h b/phonelibs/android_frameworks_native/include/media/hardware/OMXPluginBase.h deleted file mode 100644 index 7bf41473..00000000 --- a/phonelibs/android_frameworks_native/include/media/hardware/OMXPluginBase.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Copyright (C) 2009 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef OMX_PLUGIN_BASE_H_ - -#define OMX_PLUGIN_BASE_H_ - -#include - -#include - -#include -#include - -namespace android { - -struct OMXPluginBase { - OMXPluginBase() {} - virtual ~OMXPluginBase() {} - - virtual OMX_ERRORTYPE makeComponentInstance( - const char *name, - const OMX_CALLBACKTYPE *callbacks, - OMX_PTR appData, - OMX_COMPONENTTYPE **component) = 0; - - virtual OMX_ERRORTYPE destroyComponentInstance( - OMX_COMPONENTTYPE *component) = 0; - - virtual OMX_ERRORTYPE enumerateComponents( - OMX_STRING name, - size_t size, - OMX_U32 index) = 0; - - virtual OMX_ERRORTYPE getRolesOfComponent( - const char *name, - Vector *roles) = 0; - -private: - OMXPluginBase(const OMXPluginBase &); - OMXPluginBase &operator=(const OMXPluginBase &); -}; - -} // namespace android - -#endif // OMX_PLUGIN_BASE_H_ diff --git a/phonelibs/android_frameworks_native/include/media/openmax/OMX_AsString.h b/phonelibs/android_frameworks_native/include/media/openmax/OMX_AsString.h deleted file mode 100644 index ae8430d8..00000000 --- a/phonelibs/android_frameworks_native/include/media/openmax/OMX_AsString.h +++ /dev/null @@ -1,947 +0,0 @@ -/* - * Copyright 2014 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -/* NOTE: This file contains several sections for individual OMX include files. - Each section has its own include guard. This file should be included AFTER - the OMX include files. */ - -#ifdef OMX_Audio_h -/* asString definitions if media/openmax/OMX_Audio.h was included */ - -#ifndef AS_STRING_FOR_OMX_AUDIO_H -#define AS_STRING_FOR_OMX_AUDIO_H - -inline static const char *asString(OMX_AUDIO_CODINGTYPE i, const char *def = "??") { - switch (i) { - case OMX_AUDIO_CodingUnused: return "Unused"; // unused - case OMX_AUDIO_CodingAutoDetect: return "AutoDetect"; // unused - case OMX_AUDIO_CodingPCM: return "PCM"; - case OMX_AUDIO_CodingADPCM: return "ADPCM"; // unused - case OMX_AUDIO_CodingAMR: return "AMR"; - case OMX_AUDIO_CodingGSMFR: return "GSMFR"; - case OMX_AUDIO_CodingGSMEFR: return "GSMEFR"; // unused - case OMX_AUDIO_CodingGSMHR: return "GSMHR"; // unused - case OMX_AUDIO_CodingPDCFR: return "PDCFR"; // unused - case OMX_AUDIO_CodingPDCEFR: return "PDCEFR"; // unused - case OMX_AUDIO_CodingPDCHR: return "PDCHR"; // unused - case OMX_AUDIO_CodingTDMAFR: return "TDMAFR"; // unused - case OMX_AUDIO_CodingTDMAEFR: return "TDMAEFR"; // unused - case OMX_AUDIO_CodingQCELP8: return "QCELP8"; // unused - case OMX_AUDIO_CodingQCELP13: return "QCELP13"; // unused - case OMX_AUDIO_CodingEVRC: return "EVRC"; // unused - case OMX_AUDIO_CodingSMV: return "SMV"; // unused - case OMX_AUDIO_CodingG711: return "G711"; - case OMX_AUDIO_CodingG723: return "G723"; // unused - case OMX_AUDIO_CodingG726: return "G726"; // unused - case OMX_AUDIO_CodingG729: return "G729"; // unused - case OMX_AUDIO_CodingAAC: return "AAC"; - case OMX_AUDIO_CodingMP3: return "MP3"; - case OMX_AUDIO_CodingSBC: return "SBC"; // unused - case OMX_AUDIO_CodingVORBIS: return "VORBIS"; - case OMX_AUDIO_CodingWMA: return "WMA"; // unused - case OMX_AUDIO_CodingRA: return "RA"; // unused - case OMX_AUDIO_CodingMIDI: return "MIDI"; // unused - case OMX_AUDIO_CodingFLAC: return "FLAC"; - default: return def; - } -} - -inline static const char *asString(OMX_AUDIO_PCMMODETYPE i, const char *def = "??") { - switch (i) { - case OMX_AUDIO_PCMModeLinear: return "Linear"; - case OMX_AUDIO_PCMModeALaw: return "ALaw"; - case OMX_AUDIO_PCMModeMULaw: return "MULaw"; - default: return def; - } -} - -inline static const char *asString(OMX_AUDIO_CHANNELTYPE i, const char *def = "??") { - switch (i) { - case OMX_AUDIO_ChannelNone: return "None"; // unused - case OMX_AUDIO_ChannelLF: return "LF"; - case OMX_AUDIO_ChannelRF: return "RF"; - case OMX_AUDIO_ChannelCF: return "CF"; - case OMX_AUDIO_ChannelLS: return "LS"; - case OMX_AUDIO_ChannelRS: return "RS"; - case OMX_AUDIO_ChannelLFE: return "LFE"; - case OMX_AUDIO_ChannelCS: return "CS"; - case OMX_AUDIO_ChannelLR: return "LR"; - case OMX_AUDIO_ChannelRR: return "RR"; - default: return def; - } -} - -inline static const char *asString(OMX_AUDIO_CHANNELMODETYPE i, const char *def = "??") { - switch (i) { - case OMX_AUDIO_ChannelModeStereo: return "Stereo"; -// case OMX_AUDIO_ChannelModeJointStereo: return "JointStereo"; -// case OMX_AUDIO_ChannelModeDual: return "Dual"; - case OMX_AUDIO_ChannelModeMono: return "Mono"; - default: return def; - } -} - -inline static const char *asString(OMX_AUDIO_AACSTREAMFORMATTYPE i, const char *def = "??") { - switch (i) { -// case OMX_AUDIO_AACStreamFormatMP2ADTS: return "MP2ADTS"; - case OMX_AUDIO_AACStreamFormatMP4ADTS: return "MP4ADTS"; -// case OMX_AUDIO_AACStreamFormatMP4LOAS: return "MP4LOAS"; -// case OMX_AUDIO_AACStreamFormatMP4LATM: return "MP4LATM"; -// case OMX_AUDIO_AACStreamFormatADIF: return "ADIF"; - case OMX_AUDIO_AACStreamFormatMP4FF: return "MP4FF"; -// case OMX_AUDIO_AACStreamFormatRAW: return "RAW"; - default: return def; - } -} - -inline static const char *asString(OMX_AUDIO_AMRFRAMEFORMATTYPE i, const char *def = "??") { - switch (i) { -// case OMX_AUDIO_AMRFrameFormatConformance: return "Conformance"; -// case OMX_AUDIO_AMRFrameFormatIF1: return "IF1"; -// case OMX_AUDIO_AMRFrameFormatIF2: return "IF2"; - case OMX_AUDIO_AMRFrameFormatFSF: return "FSF"; -// case OMX_AUDIO_AMRFrameFormatRTPPayload: return "RTPPayload"; -// case OMX_AUDIO_AMRFrameFormatITU: return "ITU"; - default: return def; - } -} - -inline static const char *asString(OMX_AUDIO_AMRBANDMODETYPE i, const char *def = "??") { - switch (i) { - case OMX_AUDIO_AMRBandModeUnused: return "Unused"; - case OMX_AUDIO_AMRBandModeNB0: return "NB0"; - case OMX_AUDIO_AMRBandModeNB1: return "NB1"; - case OMX_AUDIO_AMRBandModeNB2: return "NB2"; - case OMX_AUDIO_AMRBandModeNB3: return "NB3"; - case OMX_AUDIO_AMRBandModeNB4: return "NB4"; - case OMX_AUDIO_AMRBandModeNB5: return "NB5"; - case OMX_AUDIO_AMRBandModeNB6: return "NB6"; - case OMX_AUDIO_AMRBandModeNB7: return "NB7"; - case OMX_AUDIO_AMRBandModeWB0: return "WB0"; - case OMX_AUDIO_AMRBandModeWB1: return "WB1"; - case OMX_AUDIO_AMRBandModeWB2: return "WB2"; - case OMX_AUDIO_AMRBandModeWB3: return "WB3"; - case OMX_AUDIO_AMRBandModeWB4: return "WB4"; - case OMX_AUDIO_AMRBandModeWB5: return "WB5"; - case OMX_AUDIO_AMRBandModeWB6: return "WB6"; - case OMX_AUDIO_AMRBandModeWB7: return "WB7"; - case OMX_AUDIO_AMRBandModeWB8: return "WB8"; - default: return def; - } -} - -inline static const char *asString(OMX_AUDIO_AMRDTXMODETYPE i, const char *def = "??") { - switch (i) { - case OMX_AUDIO_AMRDTXModeOff: return "ModeOff"; -// case OMX_AUDIO_AMRDTXModeOnVAD1: return "ModeOnVAD1"; -// case OMX_AUDIO_AMRDTXModeOnVAD2: return "ModeOnVAD2"; -// case OMX_AUDIO_AMRDTXModeOnAuto: return "ModeOnAuto"; -// case OMX_AUDIO_AMRDTXasEFR: return "asEFR"; - default: return def; - } -} - -#endif // AS_STRING_FOR_OMX_AUDIO_H - -#endif // OMX_Audio_h - -#ifdef OMX_AudioExt_h -/* asString definitions if media/openmax/OMX_AudioExt.h was included */ - -#ifndef AS_STRING_FOR_OMX_AUDIOEXT_H -#define AS_STRING_FOR_OMX_AUDIOEXT_H - -inline static const char *asString(OMX_AUDIO_CODINGEXTTYPE i, const char *def = "??") { - switch (i) { - case OMX_AUDIO_CodingAndroidAC3: return "AndroidAC3"; - case OMX_AUDIO_CodingAndroidOPUS: return "AndroidOPUS"; - default: return asString((OMX_AUDIO_CODINGTYPE)i, def); - } -} - -#endif // AS_STRING_FOR_OMX_AUDIOEXT_H - -#endif // OMX_AudioExt_h - -#ifdef OMX_Component_h -/* asString definitions if media/openmax/OMX_Component.h was included */ - -#ifndef AS_STRING_FOR_OMX_COMPONENT_H -#define AS_STRING_FOR_OMX_COMPONENT_H - -inline static const char *asString(OMX_PORTDOMAINTYPE i, const char *def = "??") { - switch (i) { - case OMX_PortDomainAudio: return "Audio"; - case OMX_PortDomainVideo: return "Video"; - case OMX_PortDomainImage: return "Image"; -// case OMX_PortDomainOther: return "Other"; - default: return def; - } -} - -#endif // AS_STRING_FOR_OMX_COMPONENT_H - -#endif // OMX_Component_h - -#ifdef OMX_Core_h -/* asString definitions if media/openmax/OMX_Core.h was included */ - -#ifndef AS_STRING_FOR_OMX_CORE_H -#define AS_STRING_FOR_OMX_CORE_H - -inline static const char *asString(OMX_COMMANDTYPE i, const char *def = "??") { - switch (i) { - case OMX_CommandStateSet: return "StateSet"; - case OMX_CommandFlush: return "Flush"; - case OMX_CommandPortDisable: return "PortDisable"; - case OMX_CommandPortEnable: return "PortEnable"; -// case OMX_CommandMarkBuffer: return "MarkBuffer"; - default: return def; - } -} - -inline static const char *asString(OMX_STATETYPE i, const char *def = "??") { - switch (i) { - case OMX_StateInvalid: return "Invalid"; - case OMX_StateLoaded: return "Loaded"; - case OMX_StateIdle: return "Idle"; - case OMX_StateExecuting: return "Executing"; -// case OMX_StatePause: return "Pause"; -// case OMX_StateWaitForResources: return "WaitForResources"; - default: return def; - } -} - -inline static const char *asString(OMX_ERRORTYPE i, const char *def = "??") { - switch (i) { - case OMX_ErrorNone: return "None"; - case OMX_ErrorInsufficientResources: return "InsufficientResources"; - case OMX_ErrorUndefined: return "Undefined"; - case OMX_ErrorInvalidComponentName: return "InvalidComponentName"; - case OMX_ErrorComponentNotFound: return "ComponentNotFound"; - case OMX_ErrorInvalidComponent: return "InvalidComponent"; // unused - case OMX_ErrorBadParameter: return "BadParameter"; - case OMX_ErrorNotImplemented: return "NotImplemented"; - case OMX_ErrorUnderflow: return "Underflow"; // unused - case OMX_ErrorOverflow: return "Overflow"; // unused - case OMX_ErrorHardware: return "Hardware"; // unused - case OMX_ErrorInvalidState: return "InvalidState"; - case OMX_ErrorStreamCorrupt: return "StreamCorrupt"; - case OMX_ErrorPortsNotCompatible: return "PortsNotCompatible"; // unused - case OMX_ErrorResourcesLost: return "ResourcesLost"; - case OMX_ErrorNoMore: return "NoMore"; - case OMX_ErrorVersionMismatch: return "VersionMismatch"; // unused - case OMX_ErrorNotReady: return "NotReady"; // unused - case OMX_ErrorTimeout: return "Timeout"; // unused - case OMX_ErrorSameState: return "SameState"; // unused - case OMX_ErrorResourcesPreempted: return "ResourcesPreempted"; // unused - case OMX_ErrorPortUnresponsiveDuringAllocation: - return "PortUnresponsiveDuringAllocation"; // unused - case OMX_ErrorPortUnresponsiveDuringDeallocation: - return "PortUnresponsiveDuringDeallocation"; // unused - case OMX_ErrorPortUnresponsiveDuringStop: - return "PortUnresponsiveDuringStop"; // unused - case OMX_ErrorIncorrectStateTransition: - return "IncorrectStateTransition"; // unused - case OMX_ErrorIncorrectStateOperation: - return "IncorrectStateOperation"; // unused - case OMX_ErrorUnsupportedSetting: return "UnsupportedSetting"; - case OMX_ErrorUnsupportedIndex: return "UnsupportedIndex"; - case OMX_ErrorBadPortIndex: return "BadPortIndex"; - case OMX_ErrorPortUnpopulated: return "PortUnpopulated"; // unused - case OMX_ErrorComponentSuspended: return "ComponentSuspended"; // unused - case OMX_ErrorDynamicResourcesUnavailable: - return "DynamicResourcesUnavailable"; // unused - case OMX_ErrorMbErrorsInFrame: return "MbErrorsInFrame"; // unused - case OMX_ErrorFormatNotDetected: return "FormatNotDetected"; // unused - case OMX_ErrorContentPipeOpenFailed: return "ContentPipeOpenFailed"; // unused - case OMX_ErrorContentPipeCreationFailed: - return "ContentPipeCreationFailed"; // unused - case OMX_ErrorSeperateTablesUsed: return "SeperateTablesUsed"; // unused - case OMX_ErrorTunnelingUnsupported: return "TunnelingUnsupported"; // unused - default: return def; - } -} - -inline static const char *asString(OMX_EVENTTYPE i, const char *def = "??") { - switch (i) { - case OMX_EventCmdComplete: return "CmdComplete"; - case OMX_EventError: return "Error"; -// case OMX_EventMark: return "Mark"; - case OMX_EventPortSettingsChanged: return "PortSettingsChanged"; - case OMX_EventBufferFlag: return "BufferFlag"; -// case OMX_EventResourcesAcquired: return "ResourcesAcquired"; -// case OMX_EventComponentResumed: return "ComponentResumed"; -// case OMX_EventDynamicResourcesAvailable: return "DynamicResourcesAvailable"; -// case OMX_EventPortFormatDetected: return "PortFormatDetected"; - case OMX_EventOutputRendered: return "OutputRendered"; - default: return def; - } -} - -#endif // AS_STRING_FOR_OMX_CORE_H - -#endif // OMX_Core_h - -#ifdef OMX_Image_h -/* asString definitions if media/openmax/OMX_Image.h was included */ - -#ifndef AS_STRING_FOR_OMX_IMAGE_H -#define AS_STRING_FOR_OMX_IMAGE_H - -inline static const char *asString(OMX_IMAGE_CODINGTYPE i, const char *def = "??") { - switch (i) { - case OMX_IMAGE_CodingUnused: return "Unused"; - case OMX_IMAGE_CodingAutoDetect: return "AutoDetect"; // unused - case OMX_IMAGE_CodingJPEG: return "JPEG"; - case OMX_IMAGE_CodingJPEG2K: return "JPEG2K"; // unused - case OMX_IMAGE_CodingEXIF: return "EXIF"; // unused - case OMX_IMAGE_CodingTIFF: return "TIFF"; // unused - case OMX_IMAGE_CodingGIF: return "GIF"; // unused - case OMX_IMAGE_CodingPNG: return "PNG"; // unused - case OMX_IMAGE_CodingLZW: return "LZW"; // unused - case OMX_IMAGE_CodingBMP: return "BMP"; // unused - default: return def; - } -} - -#endif // AS_STRING_FOR_OMX_IMAGE_H - -#endif // OMX_Image_h - -#ifdef OMX_Index_h -/* asString definitions if media/openmax/OMX_Index.h was included */ - -#ifndef AS_STRING_FOR_OMX_INDEX_H -#define AS_STRING_FOR_OMX_INDEX_H - -inline static const char *asString(OMX_INDEXTYPE i, const char *def = "??") { - switch (i) { -// case OMX_IndexParamPriorityMgmt: return "ParamPriorityMgmt"; -// case OMX_IndexParamAudioInit: return "ParamAudioInit"; -// case OMX_IndexParamImageInit: return "ParamImageInit"; -// case OMX_IndexParamVideoInit: return "ParamVideoInit"; -// case OMX_IndexParamOtherInit: return "ParamOtherInit"; -// case OMX_IndexParamNumAvailableStreams: return "ParamNumAvailableStreams"; -// case OMX_IndexParamActiveStream: return "ParamActiveStream"; -// case OMX_IndexParamSuspensionPolicy: return "ParamSuspensionPolicy"; -// case OMX_IndexParamComponentSuspended: return "ParamComponentSuspended"; -// case OMX_IndexConfigCapturing: return "ConfigCapturing"; -// case OMX_IndexConfigCaptureMode: return "ConfigCaptureMode"; -// case OMX_IndexAutoPauseAfterCapture: return "AutoPauseAfterCapture"; -// case OMX_IndexParamContentURI: return "ParamContentURI"; -// case OMX_IndexParamCustomContentPipe: return "ParamCustomContentPipe"; -// case OMX_IndexParamDisableResourceConcealment: -// return "ParamDisableResourceConcealment"; -// case OMX_IndexConfigMetadataItemCount: return "ConfigMetadataItemCount"; -// case OMX_IndexConfigContainerNodeCount: return "ConfigContainerNodeCount"; -// case OMX_IndexConfigMetadataItem: return "ConfigMetadataItem"; -// case OMX_IndexConfigCounterNodeID: return "ConfigCounterNodeID"; -// case OMX_IndexParamMetadataFilterType: return "ParamMetadataFilterType"; -// case OMX_IndexParamMetadataKeyFilter: return "ParamMetadataKeyFilter"; -// case OMX_IndexConfigPriorityMgmt: return "ConfigPriorityMgmt"; - case OMX_IndexParamStandardComponentRole: return "ParamStandardComponentRole"; - case OMX_IndexParamPortDefinition: return "ParamPortDefinition"; -// case OMX_IndexParamCompBufferSupplier: return "ParamCompBufferSupplier"; - case OMX_IndexParamAudioPortFormat: return "ParamAudioPortFormat"; - case OMX_IndexParamAudioPcm: return "ParamAudioPcm"; - case OMX_IndexParamAudioAac: return "ParamAudioAac"; -// case OMX_IndexParamAudioRa: return "ParamAudioRa"; - case OMX_IndexParamAudioMp3: return "ParamAudioMp3"; -// case OMX_IndexParamAudioAdpcm: return "ParamAudioAdpcm"; -// case OMX_IndexParamAudioG723: return "ParamAudioG723"; -// case OMX_IndexParamAudioG729: return "ParamAudioG729"; - case OMX_IndexParamAudioAmr: return "ParamAudioAmr"; -// case OMX_IndexParamAudioWma: return "ParamAudioWma"; -// case OMX_IndexParamAudioSbc: return "ParamAudioSbc"; -// case OMX_IndexParamAudioMidi: return "ParamAudioMidi"; -// case OMX_IndexParamAudioGsm_FR: return "ParamAudioGsm_FR"; -// case OMX_IndexParamAudioMidiLoadUserSound: return "ParamAudioMidiLoadUserSound"; -// case OMX_IndexParamAudioG726: return "ParamAudioG726"; -// case OMX_IndexParamAudioGsm_EFR: return "ParamAudioGsm_EFR"; -// case OMX_IndexParamAudioGsm_HR: return "ParamAudioGsm_HR"; -// case OMX_IndexParamAudioPdc_FR: return "ParamAudioPdc_FR"; -// case OMX_IndexParamAudioPdc_EFR: return "ParamAudioPdc_EFR"; -// case OMX_IndexParamAudioPdc_HR: return "ParamAudioPdc_HR"; -// case OMX_IndexParamAudioTdma_FR: return "ParamAudioTdma_FR"; -// case OMX_IndexParamAudioTdma_EFR: return "ParamAudioTdma_EFR"; -// case OMX_IndexParamAudioQcelp8: return "ParamAudioQcelp8"; -// case OMX_IndexParamAudioQcelp13: return "ParamAudioQcelp13"; -// case OMX_IndexParamAudioEvrc: return "ParamAudioEvrc"; -// case OMX_IndexParamAudioSmv: return "ParamAudioSmv"; - case OMX_IndexParamAudioVorbis: return "ParamAudioVorbis"; - case OMX_IndexParamAudioFlac: return "ParamAudioFlac"; -// case OMX_IndexConfigAudioMidiImmediateEvent: return "ConfigAudioMidiImmediateEvent"; -// case OMX_IndexConfigAudioMidiControl: return "ConfigAudioMidiControl"; -// case OMX_IndexConfigAudioMidiSoundBankProgram: -// return "ConfigAudioMidiSoundBankProgram"; -// case OMX_IndexConfigAudioMidiStatus: return "ConfigAudioMidiStatus"; -// case OMX_IndexConfigAudioMidiMetaEvent: return "ConfigAudioMidiMetaEvent"; -// case OMX_IndexConfigAudioMidiMetaEventData: return "ConfigAudioMidiMetaEventData"; -// case OMX_IndexConfigAudioVolume: return "ConfigAudioVolume"; -// case OMX_IndexConfigAudioBalance: return "ConfigAudioBalance"; -// case OMX_IndexConfigAudioChannelMute: return "ConfigAudioChannelMute"; -// case OMX_IndexConfigAudioMute: return "ConfigAudioMute"; -// case OMX_IndexConfigAudioLoudness: return "ConfigAudioLoudness"; -// case OMX_IndexConfigAudioEchoCancelation: return "ConfigAudioEchoCancelation"; -// case OMX_IndexConfigAudioNoiseReduction: return "ConfigAudioNoiseReduction"; -// case OMX_IndexConfigAudioBass: return "ConfigAudioBass"; -// case OMX_IndexConfigAudioTreble: return "ConfigAudioTreble"; -// case OMX_IndexConfigAudioStereoWidening: return "ConfigAudioStereoWidening"; -// case OMX_IndexConfigAudioChorus: return "ConfigAudioChorus"; -// case OMX_IndexConfigAudioEqualizer: return "ConfigAudioEqualizer"; -// case OMX_IndexConfigAudioReverberation: return "ConfigAudioReverberation"; -// case OMX_IndexConfigAudioChannelVolume: return "ConfigAudioChannelVolume"; -// case OMX_IndexParamImagePortFormat: return "ParamImagePortFormat"; -// case OMX_IndexParamFlashControl: return "ParamFlashControl"; -// case OMX_IndexConfigFocusControl: return "ConfigFocusControl"; -// case OMX_IndexParamQFactor: return "ParamQFactor"; -// case OMX_IndexParamQuantizationTable: return "ParamQuantizationTable"; -// case OMX_IndexParamHuffmanTable: return "ParamHuffmanTable"; -// case OMX_IndexConfigFlashControl: return "ConfigFlashControl"; - case OMX_IndexParamVideoPortFormat: return "ParamVideoPortFormat"; -// case OMX_IndexParamVideoQuantization: return "ParamVideoQuantization"; -// case OMX_IndexParamVideoFastUpdate: return "ParamVideoFastUpdate"; - case OMX_IndexParamVideoBitrate: return "ParamVideoBitrate"; -// case OMX_IndexParamVideoMotionVector: return "ParamVideoMotionVector"; - case OMX_IndexParamVideoIntraRefresh: return "ParamVideoIntraRefresh"; - case OMX_IndexParamVideoErrorCorrection: return "ParamVideoErrorCorrection"; -// case OMX_IndexParamVideoVBSMC: return "ParamVideoVBSMC"; -// case OMX_IndexParamVideoMpeg2: return "ParamVideoMpeg2"; - case OMX_IndexParamVideoMpeg4: return "ParamVideoMpeg4"; -// case OMX_IndexParamVideoWmv: return "ParamVideoWmv"; -// case OMX_IndexParamVideoRv: return "ParamVideoRv"; - case OMX_IndexParamVideoAvc: return "ParamVideoAvc"; - case OMX_IndexParamVideoH263: return "ParamVideoH263"; - case OMX_IndexParamVideoProfileLevelQuerySupported: - return "ParamVideoProfileLevelQuerySupported"; - case OMX_IndexParamVideoProfileLevelCurrent: return "ParamVideoProfileLevelCurrent"; - case OMX_IndexConfigVideoBitrate: return "ConfigVideoBitrate"; -// case OMX_IndexConfigVideoFramerate: return "ConfigVideoFramerate"; - case OMX_IndexConfigVideoIntraVOPRefresh: return "ConfigVideoIntraVOPRefresh"; -// case OMX_IndexConfigVideoIntraMBRefresh: return "ConfigVideoIntraMBRefresh"; -// case OMX_IndexConfigVideoMBErrorReporting: return "ConfigVideoMBErrorReporting"; -// case OMX_IndexParamVideoMacroblocksPerFrame: return "ParamVideoMacroblocksPerFrame"; -// case OMX_IndexConfigVideoMacroBlockErrorMap: return "ConfigVideoMacroBlockErrorMap"; -// case OMX_IndexParamVideoSliceFMO: return "ParamVideoSliceFMO"; -// case OMX_IndexConfigVideoAVCIntraPeriod: return "ConfigVideoAVCIntraPeriod"; -// case OMX_IndexConfigVideoNalSize: return "ConfigVideoNalSize"; -// case OMX_IndexParamCommonDeblocking: return "ParamCommonDeblocking"; -// case OMX_IndexParamCommonSensorMode: return "ParamCommonSensorMode"; -// case OMX_IndexParamCommonInterleave: return "ParamCommonInterleave"; -// case OMX_IndexConfigCommonColorFormatConversion: -// return "ConfigCommonColorFormatConversion"; - case OMX_IndexConfigCommonScale: return "ConfigCommonScale"; -// case OMX_IndexConfigCommonImageFilter: return "ConfigCommonImageFilter"; -// case OMX_IndexConfigCommonColorEnhancement: return "ConfigCommonColorEnhancement"; -// case OMX_IndexConfigCommonColorKey: return "ConfigCommonColorKey"; -// case OMX_IndexConfigCommonColorBlend: return "ConfigCommonColorBlend"; -// case OMX_IndexConfigCommonFrameStabilisation: return "ConfigCommonFrameStabilisation"; -// case OMX_IndexConfigCommonRotate: return "ConfigCommonRotate"; -// case OMX_IndexConfigCommonMirror: return "ConfigCommonMirror"; -// case OMX_IndexConfigCommonOutputPosition: return "ConfigCommonOutputPosition"; - case OMX_IndexConfigCommonInputCrop: return "ConfigCommonInputCrop"; - case OMX_IndexConfigCommonOutputCrop: return "ConfigCommonOutputCrop"; -// case OMX_IndexConfigCommonDigitalZoom: return "ConfigCommonDigitalZoom"; -// case OMX_IndexConfigCommonOpticalZoom: return "ConfigCommonOpticalZoom"; -// case OMX_IndexConfigCommonWhiteBalance: return "ConfigCommonWhiteBalance"; -// case OMX_IndexConfigCommonExposure: return "ConfigCommonExposure"; -// case OMX_IndexConfigCommonContrast: return "ConfigCommonContrast"; -// case OMX_IndexConfigCommonBrightness: return "ConfigCommonBrightness"; -// case OMX_IndexConfigCommonBacklight: return "ConfigCommonBacklight"; -// case OMX_IndexConfigCommonGamma: return "ConfigCommonGamma"; -// case OMX_IndexConfigCommonSaturation: return "ConfigCommonSaturation"; -// case OMX_IndexConfigCommonLightness: return "ConfigCommonLightness"; -// case OMX_IndexConfigCommonExclusionRect: return "ConfigCommonExclusionRect"; -// case OMX_IndexConfigCommonDithering: return "ConfigCommonDithering"; -// case OMX_IndexConfigCommonPlaneBlend: return "ConfigCommonPlaneBlend"; -// case OMX_IndexConfigCommonExposureValue: return "ConfigCommonExposureValue"; -// case OMX_IndexConfigCommonOutputSize: return "ConfigCommonOutputSize"; -// case OMX_IndexParamCommonExtraQuantData: return "ParamCommonExtraQuantData"; -// case OMX_IndexConfigCommonFocusRegion: return "ConfigCommonFocusRegion"; -// case OMX_IndexConfigCommonFocusStatus: return "ConfigCommonFocusStatus"; -// case OMX_IndexConfigCommonTransitionEffect: return "ConfigCommonTransitionEffect"; -// case OMX_IndexParamOtherPortFormat: return "ParamOtherPortFormat"; -// case OMX_IndexConfigOtherPower: return "ConfigOtherPower"; -// case OMX_IndexConfigOtherStats: return "ConfigOtherStats"; -// case OMX_IndexConfigTimeScale: return "ConfigTimeScale"; -// case OMX_IndexConfigTimeClockState: return "ConfigTimeClockState"; -// case OMX_IndexConfigTimeActiveRefClock: return "ConfigTimeActiveRefClock"; -// case OMX_IndexConfigTimeCurrentMediaTime: return "ConfigTimeCurrentMediaTime"; -// case OMX_IndexConfigTimeCurrentWallTime: return "ConfigTimeCurrentWallTime"; -// case OMX_IndexConfigTimeCurrentAudioReference: -// return "ConfigTimeCurrentAudioReference"; -// case OMX_IndexConfigTimeCurrentVideoReference: -// return "ConfigTimeCurrentVideoReference"; -// case OMX_IndexConfigTimeMediaTimeRequest: return "ConfigTimeMediaTimeRequest"; -// case OMX_IndexConfigTimeClientStartTime: return "ConfigTimeClientStartTime"; -// case OMX_IndexConfigTimePosition: return "ConfigTimePosition"; -// case OMX_IndexConfigTimeSeekMode: return "ConfigTimeSeekMode"; - default: return def; - } -} - -#endif // AS_STRING_FOR_OMX_INDEX_H - -#endif // OMX_Index_h - -#ifdef OMX_IndexExt_h -/* asString definitions if media/openmax/OMX_IndexExt.h was included */ - -#ifndef AS_STRING_FOR_OMX_INDEXEXT_H -#define AS_STRING_FOR_OMX_INDEXEXT_H - -inline static const char *asString(OMX_INDEXEXTTYPE i, const char *def = "??") { - switch (i) { -// case OMX_IndexConfigCallbackRequest: return "ConfigCallbackRequest"; -// case OMX_IndexConfigCommitMode: return "ConfigCommitMode"; -// case OMX_IndexConfigCommit: return "ConfigCommit"; - case OMX_IndexParamAudioAndroidAc3: return "ParamAudioAndroidAc3"; - case OMX_IndexParamAudioAndroidOpus: return "ParamAudioAndroidOpus"; - case OMX_IndexParamAudioAndroidAacPresentation: return "ParamAudioAndroidAacPresentation"; -// case OMX_IndexParamNalStreamFormatSupported: return "ParamNalStreamFormatSupported"; -// case OMX_IndexParamNalStreamFormat: return "ParamNalStreamFormat"; -// case OMX_IndexParamNalStreamFormatSelect: return "ParamNalStreamFormatSelect"; - case OMX_IndexParamVideoVp8: return "ParamVideoVp8"; -// case OMX_IndexConfigVideoVp8ReferenceFrame: return "ConfigVideoVp8ReferenceFrame"; -// case OMX_IndexConfigVideoVp8ReferenceFrameType: return "ConfigVideoVp8ReferenceFrameType"; - case OMX_IndexParamVideoAndroidVp8Encoder: return "ParamVideoAndroidVp8Encoder"; - case OMX_IndexParamVideoHevc: return "ParamVideoHevc"; -// case OMX_IndexParamSliceSegments: return "ParamSliceSegments"; - case OMX_IndexConfigAutoFramerateConversion: return "ConfigAutoFramerateConversion"; - case OMX_IndexConfigPriority: return "ConfigPriority"; - case OMX_IndexConfigOperatingRate: return "ConfigOperatingRate"; - case OMX_IndexParamConsumerUsageBits: return "ParamConsumerUsageBits"; - default: return asString((OMX_INDEXTYPE)i, def); - } -} - -#endif // AS_STRING_FOR_OMX_INDEXEXT_H - -#endif // OMX_IndexExt_h - -#ifdef OMX_IVCommon_h -/* asString definitions if media/openmax/OMX_IVCommon.h was included */ - -#ifndef AS_STRING_FOR_OMX_IVCOMMON_H -#define AS_STRING_FOR_OMX_IVCOMMON_H - -inline static const char *asString(OMX_COLOR_FORMATTYPE i, const char *def = "??") { - switch (i) { - case OMX_COLOR_FormatUnused: - return "COLOR_FormatUnused"; - case OMX_COLOR_FormatMonochrome: - return "COLOR_FormatMonochrome"; - case OMX_COLOR_Format8bitRGB332: - return "COLOR_Format8bitRGB332"; - case OMX_COLOR_Format12bitRGB444: - return "COLOR_Format12bitRGB444"; - case OMX_COLOR_Format16bitARGB4444: - return "COLOR_Format16bitARGB4444"; - case OMX_COLOR_Format16bitARGB1555: - return "COLOR_Format16bitARGB1555"; - case OMX_COLOR_Format16bitRGB565: - return "COLOR_Format16bitRGB565"; - case OMX_COLOR_Format16bitBGR565: - return "COLOR_Format16bitBGR565"; - case OMX_COLOR_Format18bitRGB666: - return "COLOR_Format18bitRGB666"; - case OMX_COLOR_Format18bitARGB1665: - return "COLOR_Format18bitARGB1665"; - case OMX_COLOR_Format19bitARGB1666: - return "COLOR_Format19bitARGB1666"; - case OMX_COLOR_Format24bitRGB888: - return "COLOR_Format24bitRGB888"; - case OMX_COLOR_Format24bitBGR888: - return "COLOR_Format24bitBGR888"; - case OMX_COLOR_Format24bitARGB1887: - return "COLOR_Format24bitARGB1887"; - case OMX_COLOR_Format25bitARGB1888: - return "COLOR_Format25bitARGB1888"; - case OMX_COLOR_Format32bitBGRA8888: - return "COLOR_Format32bitBGRA8888"; - case OMX_COLOR_Format32bitARGB8888: - return "COLOR_Format32bitARGB8888"; - case OMX_COLOR_FormatYUV411Planar: - return "COLOR_FormatYUV411Planar"; - case OMX_COLOR_FormatYUV411PackedPlanar: - return "COLOR_FormatYUV411PackedPlanar"; - case OMX_COLOR_FormatYUV420Planar: - return "COLOR_FormatYUV420Planar"; - case OMX_COLOR_FormatYUV420PackedPlanar: - return "COLOR_FormatYUV420PackedPlanar"; - case OMX_COLOR_FormatYUV420SemiPlanar: - return "COLOR_FormatYUV420SemiPlanar"; - case OMX_COLOR_FormatYUV422Planar: - return "COLOR_FormatYUV422Planar"; - case OMX_COLOR_FormatYUV422PackedPlanar: - return "COLOR_FormatYUV422PackedPlanar"; - case OMX_COLOR_FormatYUV422SemiPlanar: - return "COLOR_FormatYUV422SemiPlanar"; - case OMX_COLOR_FormatYCbYCr: - return "COLOR_FormatYCbYCr"; - case OMX_COLOR_FormatYCrYCb: - return "COLOR_FormatYCrYCb"; - case OMX_COLOR_FormatCbYCrY: - return "COLOR_FormatCbYCrY"; - case OMX_COLOR_FormatCrYCbY: - return "COLOR_FormatCrYCbY"; - case OMX_COLOR_FormatYUV444Interleaved: - return "COLOR_FormatYUV444Interleaved"; - case OMX_COLOR_FormatRawBayer8bit: - return "COLOR_FormatRawBayer8bit"; - case OMX_COLOR_FormatRawBayer10bit: - return "COLOR_FormatRawBayer10bit"; - case OMX_COLOR_FormatRawBayer8bitcompressed: - return "COLOR_FormatRawBayer8bitcompressed"; - case OMX_COLOR_FormatL2: - return "COLOR_FormatL2"; - case OMX_COLOR_FormatL4: - return "COLOR_FormatL4"; - case OMX_COLOR_FormatL8: - return "COLOR_FormatL8"; - case OMX_COLOR_FormatL16: - return "COLOR_FormatL16"; - case OMX_COLOR_FormatL24: - return "COLOR_FormatL24"; - case OMX_COLOR_FormatL32: - return "COLOR_FormatL32"; - case OMX_COLOR_FormatYUV420PackedSemiPlanar: - return "COLOR_FormatYUV420PackedSemiPlanar"; - case OMX_COLOR_FormatYUV422PackedSemiPlanar: - return "COLOR_FormatYUV422PackedSemiPlanar"; - case OMX_COLOR_Format18BitBGR666: - return "COLOR_Format18BitBGR666"; - case OMX_COLOR_Format24BitARGB6666: - return "COLOR_Format24BitARGB6666"; - case OMX_COLOR_Format24BitABGR6666: - return "COLOR_Format24BitABGR6666"; - case OMX_COLOR_FormatAndroidOpaque: - return "COLOR_FormatAndroidOpaque"; - case OMX_COLOR_FormatYUV420Flexible: - return "COLOR_FormatYUV420Flexible"; - case OMX_TI_COLOR_FormatYUV420PackedSemiPlanar: - return "TI_COLOR_FormatYUV420PackedSemiPlanar"; - case OMX_QCOM_COLOR_FormatYVU420SemiPlanar: - return "QCOM_COLOR_FormatYVU420SemiPlanar"; -// case OMX_QCOM_COLOR_FormatYUV420PackedSemiPlanar64x32Tile2m8ka: -// return "QCOM_COLOR_FormatYUV420PackedSemiPlanar64x32Tile2m8ka"; -// case OMX_SEC_COLOR_FormatNV12Tiled: -// return "SEC_COLOR_FormatNV12Tiled"; -// case OMX_QCOM_COLOR_FormatYUV420PackedSemiPlanar32m: -// return "QCOM_COLOR_FormatYUV420PackedSemiPlanar32m"; - default: - return def; - } -} - -#endif // AS_STRING_FOR_OMX_IVCOMMON_H - -#endif // OMX_IVCommon_h - -#ifdef OMX_Types_h -/* asString definitions if media/openmax/OMX_Types.h was included */ - -#ifndef AS_STRING_FOR_OMX_TYPES_H -#define AS_STRING_FOR_OMX_TYPES_H - -inline static const char *asString(OMX_BOOL i, const char *def = "??") { - switch (i) { - case OMX_FALSE: return "FALSE"; - case OMX_TRUE: return "TRUE"; - default: return def; - } -} - -inline static const char *asString(OMX_DIRTYPE i, const char *def = "??") { - switch (i) { - case OMX_DirInput: return "Input"; - case OMX_DirOutput: return "Output"; - default: return def; - } -} - -inline static const char *asString(OMX_ENDIANTYPE i, const char *def = "??") { - switch (i) { - case OMX_EndianBig: return "Big"; -// case OMX_EndianLittle: return "Little"; - default: return def; - } -} - -inline static const char *asString(OMX_NUMERICALDATATYPE i, const char *def = "??") { - switch (i) { - case OMX_NumericalDataSigned: return "Signed"; -// case OMX_NumericalDataUnsigned: return "Unsigned"; - default: return def; - } -} - -#endif // AS_STRING_FOR_OMX_TYPES_H - -#endif // OMX_Types_h - -#ifdef OMX_Video_h -/* asString definitions if media/openmax/OMX_Video.h was included */ - -#ifndef AS_STRING_FOR_OMX_VIDEO_H -#define AS_STRING_FOR_OMX_VIDEO_H - -inline static const char *asString(OMX_VIDEO_CODINGTYPE i, const char *def = "??") { - switch (i) { - case OMX_VIDEO_CodingUnused: return "Unused"; - case OMX_VIDEO_CodingAutoDetect: return "AutoDetect"; // unused - case OMX_VIDEO_CodingMPEG2: return "MPEG2"; - case OMX_VIDEO_CodingH263: return "H263"; - case OMX_VIDEO_CodingMPEG4: return "MPEG4"; - case OMX_VIDEO_CodingWMV: return "WMV"; // unused - case OMX_VIDEO_CodingRV: return "RV"; // unused - case OMX_VIDEO_CodingAVC: return "AVC"; - case OMX_VIDEO_CodingMJPEG: return "MJPEG"; // unused - case OMX_VIDEO_CodingVP8: return "VP8"; - case OMX_VIDEO_CodingVP9: return "VP9"; - case OMX_VIDEO_CodingHEVC: return "HEVC"; - default: return def; - } -} - -inline static const char *asString(OMX_VIDEO_CONTROLRATETYPE i, const char *def = "??") { - switch (i) { -// case OMX_Video_ControlRateDisable: return "Disable"; - case OMX_Video_ControlRateVariable: return "Variable"; - case OMX_Video_ControlRateConstant: return "Constant"; -// case OMX_Video_ControlRateVariableSkipFrames: return "VariableSkipFrames"; -// case OMX_Video_ControlRateConstantSkipFrames: return "ConstantSkipFrames"; - default: return def; - } -} - -inline static const char *asString(OMX_VIDEO_INTRAREFRESHTYPE i, const char *def = "??") { - switch (i) { - case OMX_VIDEO_IntraRefreshCyclic: return "Cyclic"; - case OMX_VIDEO_IntraRefreshAdaptive: return "Adaptive"; - case OMX_VIDEO_IntraRefreshBoth: return "Both"; - default: return def; - } -} - -inline static const char *asString(OMX_VIDEO_H263PROFILETYPE i, const char *def = "??") { - switch (i) { - case OMX_VIDEO_H263ProfileBaseline: return "Baseline"; - case OMX_VIDEO_H263ProfileH320Coding: return "H320Coding"; - case OMX_VIDEO_H263ProfileBackwardCompatible: return "BackwardCompatible"; - case OMX_VIDEO_H263ProfileISWV2: return "ISWV2"; - case OMX_VIDEO_H263ProfileISWV3: return "ISWV3"; - case OMX_VIDEO_H263ProfileHighCompression: return "HighCompression"; - case OMX_VIDEO_H263ProfileInternet: return "Internet"; - case OMX_VIDEO_H263ProfileInterlace: return "Interlace"; - case OMX_VIDEO_H263ProfileHighLatency: return "HighLatency"; - default: return def; - } -} - -inline static const char *asString(OMX_VIDEO_H263LEVELTYPE i, const char *def = "??") { - switch (i) { - case OMX_VIDEO_H263Level10: return "Level10"; - case OMX_VIDEO_H263Level20: return "Level20"; - case OMX_VIDEO_H263Level30: return "Level30"; - case OMX_VIDEO_H263Level40: return "Level40"; - case OMX_VIDEO_H263Level45: return "Level45"; - case OMX_VIDEO_H263Level50: return "Level50"; - case OMX_VIDEO_H263Level60: return "Level60"; - case OMX_VIDEO_H263Level70: return "Level70"; - default: return def; - } -} - -inline static const char *asString(OMX_VIDEO_PICTURETYPE i, const char *def = "??") { - switch (i) { - case OMX_VIDEO_PictureTypeI: return "I"; - case OMX_VIDEO_PictureTypeP: return "P"; - case OMX_VIDEO_PictureTypeB: return "B"; -// case OMX_VIDEO_PictureTypeSI: return "SI"; -// case OMX_VIDEO_PictureTypeSP: return "SP"; -// case OMX_VIDEO_PictureTypeEI: return "EI"; -// case OMX_VIDEO_PictureTypeEP: return "EP"; -// case OMX_VIDEO_PictureTypeS: return "S"; - default: return def; - } -} - -inline static const char *asString(OMX_VIDEO_MPEG4PROFILETYPE i, const char *def = "??") { - switch (i) { - case OMX_VIDEO_MPEG4ProfileSimple: return "Simple"; - case OMX_VIDEO_MPEG4ProfileSimpleScalable: return "SimpleScalable"; - case OMX_VIDEO_MPEG4ProfileCore: return "Core"; - case OMX_VIDEO_MPEG4ProfileMain: return "Main"; - case OMX_VIDEO_MPEG4ProfileNbit: return "Nbit"; - case OMX_VIDEO_MPEG4ProfileScalableTexture: return "ScalableTexture"; - case OMX_VIDEO_MPEG4ProfileSimpleFace: return "SimpleFace"; - case OMX_VIDEO_MPEG4ProfileSimpleFBA: return "SimpleFBA"; - case OMX_VIDEO_MPEG4ProfileBasicAnimated: return "BasicAnimated"; - case OMX_VIDEO_MPEG4ProfileHybrid: return "Hybrid"; - case OMX_VIDEO_MPEG4ProfileAdvancedRealTime: return "AdvancedRealTime"; - case OMX_VIDEO_MPEG4ProfileCoreScalable: return "CoreScalable"; - case OMX_VIDEO_MPEG4ProfileAdvancedCoding: return "AdvancedCoding"; - case OMX_VIDEO_MPEG4ProfileAdvancedCore: return "AdvancedCore"; - case OMX_VIDEO_MPEG4ProfileAdvancedScalable: return "AdvancedScalable"; - case OMX_VIDEO_MPEG4ProfileAdvancedSimple: return "AdvancedSimple"; - default: return def; - } -} - -inline static const char *asString(OMX_VIDEO_MPEG4LEVELTYPE i, const char *def = "??") { - switch (i) { - case OMX_VIDEO_MPEG4Level0: return "Level0"; - case OMX_VIDEO_MPEG4Level0b: return "Level0b"; - case OMX_VIDEO_MPEG4Level1: return "Level1"; - case OMX_VIDEO_MPEG4Level2: return "Level2"; - case OMX_VIDEO_MPEG4Level3: return "Level3"; - case OMX_VIDEO_MPEG4Level4: return "Level4"; - case OMX_VIDEO_MPEG4Level4a: return "Level4a"; - case OMX_VIDEO_MPEG4Level5: return "Level5"; - default: return def; - } -} - -inline static const char *asString(OMX_VIDEO_AVCPROFILETYPE i, const char *def = "??") { - switch (i) { - case OMX_VIDEO_AVCProfileBaseline: return "Baseline"; - case OMX_VIDEO_AVCProfileMain: return "Main"; - case OMX_VIDEO_AVCProfileExtended: return "Extended"; - case OMX_VIDEO_AVCProfileHigh: return "High"; - case OMX_VIDEO_AVCProfileHigh10: return "High10"; - case OMX_VIDEO_AVCProfileHigh422: return "High422"; - case OMX_VIDEO_AVCProfileHigh444: return "High444"; - default: return def; - } -} - -inline static const char *asString(OMX_VIDEO_AVCLEVELTYPE i, const char *def = "??") { - switch (i) { - case OMX_VIDEO_AVCLevel1: return "Level1"; - case OMX_VIDEO_AVCLevel1b: return "Level1b"; - case OMX_VIDEO_AVCLevel11: return "Level11"; - case OMX_VIDEO_AVCLevel12: return "Level12"; - case OMX_VIDEO_AVCLevel13: return "Level13"; - case OMX_VIDEO_AVCLevel2: return "Level2"; - case OMX_VIDEO_AVCLevel21: return "Level21"; - case OMX_VIDEO_AVCLevel22: return "Level22"; - case OMX_VIDEO_AVCLevel3: return "Level3"; - case OMX_VIDEO_AVCLevel31: return "Level31"; - case OMX_VIDEO_AVCLevel32: return "Level32"; - case OMX_VIDEO_AVCLevel4: return "Level4"; - case OMX_VIDEO_AVCLevel41: return "Level41"; - case OMX_VIDEO_AVCLevel42: return "Level42"; - case OMX_VIDEO_AVCLevel5: return "Level5"; - case OMX_VIDEO_AVCLevel51: return "Level51"; - case OMX_VIDEO_AVCLevel52: return "Level52"; - default: return def; - } -} - -inline static const char *asString(OMX_VIDEO_AVCLOOPFILTERTYPE i, const char *def = "??") { - switch (i) { - case OMX_VIDEO_AVCLoopFilterEnable: return "Enable"; -// case OMX_VIDEO_AVCLoopFilterDisable: return "Disable"; -// case OMX_VIDEO_AVCLoopFilterDisableSliceBoundary: return "DisableSliceBoundary"; - default: return def; - } -} - -#endif // AS_STRING_FOR_OMX_VIDEO_H - -#endif // OMX_Video_h - -#ifdef OMX_VideoExt_h -/* asString definitions if media/openmax/OMX_VideoExt.h was included */ - -#ifndef AS_STRING_FOR_OMX_VIDEOEXT_H -#define AS_STRING_FOR_OMX_VIDEOEXT_H - -inline static const char *asString(OMX_VIDEO_VP8PROFILETYPE i, const char *def = "!!") { - switch (i) { - case OMX_VIDEO_VP8ProfileMain: return "Main"; - case OMX_VIDEO_VP8ProfileUnknown: return "Unknown"; // unused - default: return def; - } -} - -inline static const char *asString(OMX_VIDEO_VP8LEVELTYPE i, const char *def = "!!") { - switch (i) { - case OMX_VIDEO_VP8Level_Version0: return "_Version0"; - case OMX_VIDEO_VP8Level_Version1: return "_Version1"; - case OMX_VIDEO_VP8Level_Version2: return "_Version2"; - case OMX_VIDEO_VP8Level_Version3: return "_Version3"; - case OMX_VIDEO_VP8LevelUnknown: return "Unknown"; // unused - default: return def; - } -} - -inline static const char *asString( - OMX_VIDEO_ANDROID_VPXTEMPORALLAYERPATTERNTYPE i, const char *def = "??") { - switch (i) { - case OMX_VIDEO_VPXTemporalLayerPatternNone: return "VPXTemporalLayerPatternNone"; - case OMX_VIDEO_VPXTemporalLayerPatternWebRTC: return "VPXTemporalLayerPatternWebRTC"; - default: return def; - } -} - -inline static const char *asString(OMX_VIDEO_HEVCPROFILETYPE i, const char *def = "!!") { - switch (i) { - case OMX_VIDEO_HEVCProfileUnknown: return "Unknown"; // unused - case OMX_VIDEO_HEVCProfileMain: return "Main"; - case OMX_VIDEO_HEVCProfileMain10: return "Main10"; - default: return def; - } -} - -inline static const char *asString(OMX_VIDEO_HEVCLEVELTYPE i, const char *def = "!!") { - switch (i) { - case OMX_VIDEO_HEVCLevelUnknown: return "LevelUnknown"; // unused - case OMX_VIDEO_HEVCMainTierLevel1: return "MainTierLevel1"; - case OMX_VIDEO_HEVCHighTierLevel1: return "HighTierLevel1"; - case OMX_VIDEO_HEVCMainTierLevel2: return "MainTierLevel2"; - case OMX_VIDEO_HEVCHighTierLevel2: return "HighTierLevel2"; - case OMX_VIDEO_HEVCMainTierLevel21: return "MainTierLevel21"; - case OMX_VIDEO_HEVCHighTierLevel21: return "HighTierLevel21"; - case OMX_VIDEO_HEVCMainTierLevel3: return "MainTierLevel3"; - case OMX_VIDEO_HEVCHighTierLevel3: return "HighTierLevel3"; - case OMX_VIDEO_HEVCMainTierLevel31: return "MainTierLevel31"; - case OMX_VIDEO_HEVCHighTierLevel31: return "HighTierLevel31"; - case OMX_VIDEO_HEVCMainTierLevel4: return "MainTierLevel4"; - case OMX_VIDEO_HEVCHighTierLevel4: return "HighTierLevel4"; - case OMX_VIDEO_HEVCMainTierLevel41: return "MainTierLevel41"; - case OMX_VIDEO_HEVCHighTierLevel41: return "HighTierLevel41"; - case OMX_VIDEO_HEVCMainTierLevel5: return "MainTierLevel5"; - case OMX_VIDEO_HEVCHighTierLevel5: return "HighTierLevel5"; - case OMX_VIDEO_HEVCMainTierLevel51: return "MainTierLevel51"; - case OMX_VIDEO_HEVCHighTierLevel51: return "HighTierLevel51"; - case OMX_VIDEO_HEVCMainTierLevel52: return "MainTierLevel52"; - case OMX_VIDEO_HEVCHighTierLevel52: return "HighTierLevel52"; - case OMX_VIDEO_HEVCMainTierLevel6: return "MainTierLevel6"; - case OMX_VIDEO_HEVCHighTierLevel6: return "HighTierLevel6"; - case OMX_VIDEO_HEVCMainTierLevel61: return "MainTierLevel61"; - case OMX_VIDEO_HEVCHighTierLevel61: return "HighTierLevel61"; - case OMX_VIDEO_HEVCMainTierLevel62: return "MainTierLevel62"; - case OMX_VIDEO_HEVCHighTierLevel62: return "HighTierLevel62"; - default: return def; - } -} - -#endif // AS_STRING_FOR_OMX_VIDEOEXT_H - -#endif // OMX_VideoExt_h diff --git a/phonelibs/android_frameworks_native/include/media/openmax/OMX_Audio.h b/phonelibs/android_frameworks_native/include/media/openmax/OMX_Audio.h deleted file mode 100644 index a0cbd3bb..00000000 --- a/phonelibs/android_frameworks_native/include/media/openmax/OMX_Audio.h +++ /dev/null @@ -1,1342 +0,0 @@ -/* ------------------------------------------------------------------ - * Copyright (C) 1998-2009 PacketVideo - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either - * express or implied. - * See the License for the specific language governing permissions - * and limitations under the License. - * ------------------------------------------------------------------- - */ -/* - * Copyright (c) 2008 The Khronos Group Inc. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation the rights to use, copy, modify, merge, publish, - * distribute, sublicense, and/or sell copies of the Software, and to - * permit persons to whom the Software is furnished to do so, subject - * to the following conditions: - * The above copyright notice and this permission notice shall be included - * in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. - * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY - * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, - * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE - * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - */ - -/** @file OMX_Audio.h - OpenMax IL version 1.1.2 - * The structures needed by Audio components to exchange - * parameters and configuration data with the componenmilts. - */ - -#ifndef OMX_Audio_h -#define OMX_Audio_h - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/* Each OMX header must include all required header files to allow the - * header to compile without errors. The includes below are required - * for this header file to compile successfully - */ - -#include - -/** @defgroup midi MIDI - * @ingroup audio - */ - -/** @defgroup effects Audio effects - * @ingroup audio - */ - -/** @defgroup audio OpenMAX IL Audio Domain - * Structures for OpenMAX IL Audio domain - * @{ - */ - -/** Enumeration used to define the possible audio codings. - * If "OMX_AUDIO_CodingUnused" is selected, the coding selection must - * be done in a vendor specific way. Since this is for an audio - * processing element this enum is relevant. However, for another - * type of component other enums would be in this area. - */ -typedef enum OMX_AUDIO_CODINGTYPE { - OMX_AUDIO_CodingUnused = 0, /**< Placeholder value when coding is N/A */ - OMX_AUDIO_CodingAutoDetect, /**< auto detection of audio format */ - OMX_AUDIO_CodingPCM, /**< Any variant of PCM coding */ - OMX_AUDIO_CodingADPCM, /**< Any variant of ADPCM encoded data */ - OMX_AUDIO_CodingAMR, /**< Any variant of AMR encoded data */ - OMX_AUDIO_CodingGSMFR, /**< Any variant of GSM fullrate (i.e. GSM610) */ - OMX_AUDIO_CodingGSMEFR, /**< Any variant of GSM Enhanced Fullrate encoded data*/ - OMX_AUDIO_CodingGSMHR, /**< Any variant of GSM Halfrate encoded data */ - OMX_AUDIO_CodingPDCFR, /**< Any variant of PDC Fullrate encoded data */ - OMX_AUDIO_CodingPDCEFR, /**< Any variant of PDC Enhanced Fullrate encoded data */ - OMX_AUDIO_CodingPDCHR, /**< Any variant of PDC Halfrate encoded data */ - OMX_AUDIO_CodingTDMAFR, /**< Any variant of TDMA Fullrate encoded data (TIA/EIA-136-420) */ - OMX_AUDIO_CodingTDMAEFR, /**< Any variant of TDMA Enhanced Fullrate encoded data (TIA/EIA-136-410) */ - OMX_AUDIO_CodingQCELP8, /**< Any variant of QCELP 8kbps encoded data */ - OMX_AUDIO_CodingQCELP13, /**< Any variant of QCELP 13kbps encoded data */ - OMX_AUDIO_CodingEVRC, /**< Any variant of EVRC encoded data */ - OMX_AUDIO_CodingSMV, /**< Any variant of SMV encoded data */ - OMX_AUDIO_CodingG711, /**< Any variant of G.711 encoded data */ - OMX_AUDIO_CodingG723, /**< Any variant of G.723 dot 1 encoded data */ - OMX_AUDIO_CodingG726, /**< Any variant of G.726 encoded data */ - OMX_AUDIO_CodingG729, /**< Any variant of G.729 encoded data */ - OMX_AUDIO_CodingAAC, /**< Any variant of AAC encoded data */ - OMX_AUDIO_CodingMP3, /**< Any variant of MP3 encoded data */ - OMX_AUDIO_CodingSBC, /**< Any variant of SBC encoded data */ - OMX_AUDIO_CodingVORBIS, /**< Any variant of VORBIS encoded data */ - OMX_AUDIO_CodingWMA, /**< Any variant of WMA encoded data */ - OMX_AUDIO_CodingRA, /**< Any variant of RA encoded data */ - OMX_AUDIO_CodingMIDI, /**< Any variant of MIDI encoded data */ - OMX_AUDIO_CodingFLAC, /**< Any variant of FLAC encoded data */ - OMX_AUDIO_CodingKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_AUDIO_CodingVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_AUDIO_CodingMax = 0x7FFFFFFF -} OMX_AUDIO_CODINGTYPE; - - -/** The PortDefinition structure is used to define all of the parameters - * necessary for the compliant component to setup an input or an output audio - * path. If additional information is needed to define the parameters of the - * port (such as frequency), additional structures must be sent such as the - * OMX_AUDIO_PARAM_PCMMODETYPE structure to supply the extra parameters for the port. - */ -typedef struct OMX_AUDIO_PORTDEFINITIONTYPE { - OMX_STRING cMIMEType; /**< MIME type of data for the port */ - OMX_NATIVE_DEVICETYPE pNativeRender; /** < platform specific reference - for an output device, - otherwise this field is 0 */ - OMX_BOOL bFlagErrorConcealment; /**< Turns on error concealment if it is - supported by the OMX component */ - OMX_AUDIO_CODINGTYPE eEncoding; /**< Type of data expected for this - port (e.g. PCM, AMR, MP3, etc) */ -} OMX_AUDIO_PORTDEFINITIONTYPE; - - -/** Port format parameter. This structure is used to enumerate - * the various data input/output format supported by the port. - */ -typedef struct OMX_AUDIO_PARAM_PORTFORMATTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< Indicates which port to set */ - OMX_U32 nIndex; /**< Indicates the enumeration index for the format from 0x0 to N-1 */ - OMX_AUDIO_CODINGTYPE eEncoding; /**< Type of data expected for this port (e.g. PCM, AMR, MP3, etc) */ -} OMX_AUDIO_PARAM_PORTFORMATTYPE; - - -/** PCM mode type */ -typedef enum OMX_AUDIO_PCMMODETYPE { - OMX_AUDIO_PCMModeLinear = 0, /**< Linear PCM encoded data */ - OMX_AUDIO_PCMModeALaw, /**< A law PCM encoded data (G.711) */ - OMX_AUDIO_PCMModeMULaw, /**< Mu law PCM encoded data (G.711) */ - OMX_AUDIO_PCMModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_AUDIO_PCMModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_AUDIO_PCMModeMax = 0x7FFFFFFF -} OMX_AUDIO_PCMMODETYPE; - - -typedef enum OMX_AUDIO_CHANNELTYPE { - OMX_AUDIO_ChannelNone = 0x0, /**< Unused or empty */ - OMX_AUDIO_ChannelLF = 0x1, /**< Left front */ - OMX_AUDIO_ChannelRF = 0x2, /**< Right front */ - OMX_AUDIO_ChannelCF = 0x3, /**< Center front */ - OMX_AUDIO_ChannelLS = 0x4, /**< Left surround */ - OMX_AUDIO_ChannelRS = 0x5, /**< Right surround */ - OMX_AUDIO_ChannelLFE = 0x6, /**< Low frequency effects */ - OMX_AUDIO_ChannelCS = 0x7, /**< Back surround */ - OMX_AUDIO_ChannelLR = 0x8, /**< Left rear. */ - OMX_AUDIO_ChannelRR = 0x9, /**< Right rear. */ - OMX_AUDIO_ChannelKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_AUDIO_ChannelVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_AUDIO_ChannelMax = 0x7FFFFFFF -} OMX_AUDIO_CHANNELTYPE; - -#define OMX_AUDIO_MAXCHANNELS 16 /**< maximum number distinct audio channels that a buffer may contain */ -#define OMX_MIN_PCMPAYLOAD_MSEC 5 /**< Minimum audio buffer payload size for uncompressed (PCM) audio */ - -/** PCM format description */ -typedef struct OMX_AUDIO_PARAM_PCMMODETYPE { - OMX_U32 nSize; /**< Size of this structure, in Bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nChannels; /**< Number of channels (e.g. 2 for stereo) */ - OMX_NUMERICALDATATYPE eNumData; /**< indicates PCM data as signed or unsigned */ - OMX_ENDIANTYPE eEndian; /**< indicates PCM data as little or big endian */ - OMX_BOOL bInterleaved; /**< True for normal interleaved data; false for - non-interleaved data (e.g. block data) */ - OMX_U32 nBitPerSample; /**< Bit per sample */ - OMX_U32 nSamplingRate; /**< Sampling rate of the source data. Use 0 for - variable or unknown sampling rate. */ - OMX_AUDIO_PCMMODETYPE ePCMMode; /**< PCM mode enumeration */ - OMX_AUDIO_CHANNELTYPE eChannelMapping[OMX_AUDIO_MAXCHANNELS]; /**< Slot i contains channel defined by eChannelMap[i] */ - -} OMX_AUDIO_PARAM_PCMMODETYPE; - - -/** Audio channel mode. This is used by both AAC and MP3, although the names are more appropriate - * for the MP3. For example, JointStereo for MP3 is CouplingChannels for AAC. - */ -typedef enum OMX_AUDIO_CHANNELMODETYPE { - OMX_AUDIO_ChannelModeStereo = 0, /**< 2 channels, the bitrate allocation between those - two channels changes accordingly to each channel information */ - OMX_AUDIO_ChannelModeJointStereo, /**< mode that takes advantage of what is common between - 2 channels for higher compression gain */ - OMX_AUDIO_ChannelModeDual, /**< 2 mono-channels, each channel is encoded with half - the bitrate of the overall bitrate */ - OMX_AUDIO_ChannelModeMono, /**< Mono channel mode */ - OMX_AUDIO_ChannelModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_AUDIO_ChannelModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_AUDIO_ChannelModeMax = 0x7FFFFFFF -} OMX_AUDIO_CHANNELMODETYPE; - - -typedef enum OMX_AUDIO_MP3STREAMFORMATTYPE { - OMX_AUDIO_MP3StreamFormatMP1Layer3 = 0, /**< MP3 Audio MPEG 1 Layer 3 Stream format */ - OMX_AUDIO_MP3StreamFormatMP2Layer3, /**< MP3 Audio MPEG 2 Layer 3 Stream format */ - OMX_AUDIO_MP3StreamFormatMP2_5Layer3, /**< MP3 Audio MPEG2.5 Layer 3 Stream format */ - OMX_AUDIO_MP3StreamFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_AUDIO_MP3StreamFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_AUDIO_MP3StreamFormatMax = 0x7FFFFFFF -} OMX_AUDIO_MP3STREAMFORMATTYPE; - -/** MP3 params */ -typedef struct OMX_AUDIO_PARAM_MP3TYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nChannels; /**< Number of channels */ - OMX_U32 nBitRate; /**< Bit rate of the input data. Use 0 for variable - rate or unknown bit rates */ - OMX_U32 nSampleRate; /**< Sampling rate of the source data. Use 0 for - variable or unknown sampling rate. */ - OMX_U32 nAudioBandWidth; /**< Audio band width (in Hz) to which an encoder should - limit the audio signal. Use 0 to let encoder decide */ - OMX_AUDIO_CHANNELMODETYPE eChannelMode; /**< Channel mode enumeration */ - OMX_AUDIO_MP3STREAMFORMATTYPE eFormat; /**< MP3 stream format */ -} OMX_AUDIO_PARAM_MP3TYPE; - - -typedef enum OMX_AUDIO_AACSTREAMFORMATTYPE { - OMX_AUDIO_AACStreamFormatMP2ADTS = 0, /**< AAC Audio Data Transport Stream 2 format */ - OMX_AUDIO_AACStreamFormatMP4ADTS, /**< AAC Audio Data Transport Stream 4 format */ - OMX_AUDIO_AACStreamFormatMP4LOAS, /**< AAC Low Overhead Audio Stream format */ - OMX_AUDIO_AACStreamFormatMP4LATM, /**< AAC Low overhead Audio Transport Multiplex */ - OMX_AUDIO_AACStreamFormatADIF, /**< AAC Audio Data Interchange Format */ - OMX_AUDIO_AACStreamFormatMP4FF, /**< AAC inside MPEG-4/ISO File Format */ - OMX_AUDIO_AACStreamFormatRAW, /**< AAC Raw Format */ - OMX_AUDIO_AACStreamFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_AUDIO_AACStreamFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_AUDIO_AACStreamFormatMax = 0x7FFFFFFF -} OMX_AUDIO_AACSTREAMFORMATTYPE; - - -/** AAC mode type. Note that the term profile is used with the MPEG-2 - * standard and the term object type and profile is used with MPEG-4 */ -typedef enum OMX_AUDIO_AACPROFILETYPE{ - OMX_AUDIO_AACObjectNull = 0, /**< Null, not used */ - OMX_AUDIO_AACObjectMain = 1, /**< AAC Main object */ - OMX_AUDIO_AACObjectLC, /**< AAC Low Complexity object (AAC profile) */ - OMX_AUDIO_AACObjectSSR, /**< AAC Scalable Sample Rate object */ - OMX_AUDIO_AACObjectLTP, /**< AAC Long Term Prediction object */ - OMX_AUDIO_AACObjectHE, /**< AAC High Efficiency (object type SBR, HE-AAC profile) */ - OMX_AUDIO_AACObjectScalable, /**< AAC Scalable object */ - OMX_AUDIO_AACObjectERLC = 17, /**< ER AAC Low Complexity object (Error Resilient AAC-LC) */ - OMX_AUDIO_AACObjectLD = 23, /**< AAC Low Delay object (Error Resilient) */ - OMX_AUDIO_AACObjectHE_PS = 29, /**< AAC High Efficiency with Parametric Stereo coding (HE-AAC v2, object type PS) */ - OMX_AUDIO_AACObjectELD = 39, /** AAC Enhanced Low Delay. NOTE: Pending Khronos standardization **/ - OMX_AUDIO_AACObjectKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_AUDIO_AACObjectVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_AUDIO_AACObjectMax = 0x7FFFFFFF -} OMX_AUDIO_AACPROFILETYPE; - - -/** AAC tool usage (for nAACtools in OMX_AUDIO_PARAM_AACPROFILETYPE). - * Required for encoder configuration and optional as decoder info output. - * For MP3, OMX_AUDIO_CHANNELMODETYPE is sufficient. */ -#define OMX_AUDIO_AACToolNone 0x00000000 /**< no AAC tools allowed (encoder config) or active (decoder info output) */ -#define OMX_AUDIO_AACToolMS 0x00000001 /**< MS: Mid/side joint coding tool allowed or active */ -#define OMX_AUDIO_AACToolIS 0x00000002 /**< IS: Intensity stereo tool allowed or active */ -#define OMX_AUDIO_AACToolTNS 0x00000004 /**< TNS: Temporal Noise Shaping tool allowed or active */ -#define OMX_AUDIO_AACToolPNS 0x00000008 /**< PNS: MPEG-4 Perceptual Noise substitution tool allowed or active */ -#define OMX_AUDIO_AACToolLTP 0x00000010 /**< LTP: MPEG-4 Long Term Prediction tool allowed or active */ -#define OMX_AUDIO_AACToolVendor 0x00010000 /**< NOT A KHRONOS VALUE, offset for vendor-specific additions */ -#define OMX_AUDIO_AACToolAll 0x7FFFFFFF /**< all AAC tools allowed or active (*/ - -/** MPEG-4 AAC error resilience (ER) tool usage (for nAACERtools in OMX_AUDIO_PARAM_AACPROFILETYPE). - * Required for ER encoder configuration and optional as decoder info output */ -#define OMX_AUDIO_AACERNone 0x00000000 /**< no AAC ER tools allowed/used */ -#define OMX_AUDIO_AACERVCB11 0x00000001 /**< VCB11: Virtual Code Books for AAC section data */ -#define OMX_AUDIO_AACERRVLC 0x00000002 /**< RVLC: Reversible Variable Length Coding */ -#define OMX_AUDIO_AACERHCR 0x00000004 /**< HCR: Huffman Codeword Reordering */ -#define OMX_AUDIO_AACERAll 0x7FFFFFFF /**< all AAC ER tools allowed/used */ - - -/** AAC params */ -typedef struct OMX_AUDIO_PARAM_AACPROFILETYPE { - OMX_U32 nSize; /**< Size of this structure, in Bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< Port that this structure applies to */ - OMX_U32 nChannels; /**< Number of channels */ - OMX_U32 nSampleRate; /**< Sampling rate of the source data. Use 0 for - variable or unknown sampling rate. */ - OMX_U32 nBitRate; /**< Bit rate of the input data. Use 0 for variable - rate or unknown bit rates */ - OMX_U32 nAudioBandWidth; /**< Audio band width (in Hz) to which an encoder should - limit the audio signal. Use 0 to let encoder decide */ - OMX_U32 nFrameLength; /**< Frame length (in audio samples per channel) of the codec. - Can be 1024 or 960 (AAC-LC), 2048 (HE-AAC), 480 or 512 (AAC-LD). - Use 0 to let encoder decide */ - OMX_U32 nAACtools; /**< AAC tool usage */ - OMX_U32 nAACERtools; /**< MPEG-4 AAC error resilience tool usage */ - OMX_AUDIO_AACPROFILETYPE eAACProfile; /**< AAC profile enumeration */ - OMX_AUDIO_AACSTREAMFORMATTYPE eAACStreamFormat; /**< AAC stream format enumeration */ - OMX_AUDIO_CHANNELMODETYPE eChannelMode; /**< Channel mode enumeration */ -} OMX_AUDIO_PARAM_AACPROFILETYPE; - - -/** VORBIS params */ -typedef struct OMX_AUDIO_PARAM_VORBISTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nChannels; /**< Number of channels */ - OMX_U32 nBitRate; /**< Bit rate of the encoded data data. Use 0 for variable - rate or unknown bit rates. Encoding is set to the - bitrate closest to specified value (in bps) */ - OMX_U32 nMinBitRate; /**< Sets minimum bitrate (in bps). */ - OMX_U32 nMaxBitRate; /**< Sets maximum bitrate (in bps). */ - - OMX_U32 nSampleRate; /**< Sampling rate of the source data. Use 0 for - variable or unknown sampling rate. */ - OMX_U32 nAudioBandWidth; /**< Audio band width (in Hz) to which an encoder should - limit the audio signal. Use 0 to let encoder decide */ - OMX_S32 nQuality; /**< Sets encoding quality to n, between -1 (low) and 10 (high). - In the default mode of operation, teh quality level is 3. - Normal quality range is 0 - 10. */ - OMX_BOOL bManaged; /**< Set bitrate management mode. This turns off the - normal VBR encoding, but allows hard or soft bitrate - constraints to be enforced by the encoder. This mode can - be slower, and may also be lower quality. It is - primarily useful for streaming. */ - OMX_BOOL bDownmix; /**< Downmix input from stereo to mono (has no effect on - non-stereo streams). Useful for lower-bitrate encoding. */ -} OMX_AUDIO_PARAM_VORBISTYPE; - - -/** FLAC params */ -typedef struct OMX_AUDIO_PARAM_FLACTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nChannels; /**< Number of channels */ - OMX_U32 nSampleRate; /**< Sampling rate of the source data. Use 0 for - unknown sampling rate. */ - OMX_U32 nCompressionLevel;/**< FLAC compression level, from 0 (fastest compression) - to 8 (highest compression */ -} OMX_AUDIO_PARAM_FLACTYPE; - - -/** WMA Version */ -typedef enum OMX_AUDIO_WMAFORMATTYPE { - OMX_AUDIO_WMAFormatUnused = 0, /**< format unused or unknown */ - OMX_AUDIO_WMAFormat7, /**< Windows Media Audio format 7 */ - OMX_AUDIO_WMAFormat8, /**< Windows Media Audio format 8 */ - OMX_AUDIO_WMAFormat9, /**< Windows Media Audio format 9 */ - OMX_AUDIO_WMAFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_AUDIO_WMAFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_AUDIO_WMAFormatMax = 0x7FFFFFFF -} OMX_AUDIO_WMAFORMATTYPE; - - -/** WMA Profile */ -typedef enum OMX_AUDIO_WMAPROFILETYPE { - OMX_AUDIO_WMAProfileUnused = 0, /**< profile unused or unknown */ - OMX_AUDIO_WMAProfileL1, /**< Windows Media audio version 9 profile L1 */ - OMX_AUDIO_WMAProfileL2, /**< Windows Media audio version 9 profile L2 */ - OMX_AUDIO_WMAProfileL3, /**< Windows Media audio version 9 profile L3 */ - OMX_AUDIO_WMAProfileKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_AUDIO_WMAProfileVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_AUDIO_WMAProfileMax = 0x7FFFFFFF -} OMX_AUDIO_WMAPROFILETYPE; - - -/** WMA params */ -typedef struct OMX_AUDIO_PARAM_WMATYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U16 nChannels; /**< Number of channels */ - OMX_U32 nBitRate; /**< Bit rate of the input data. Use 0 for variable - rate or unknown bit rates */ - OMX_AUDIO_WMAFORMATTYPE eFormat; /**< Version of WMA stream / data */ - OMX_AUDIO_WMAPROFILETYPE eProfile; /**< Profile of WMA stream / data */ - OMX_U32 nSamplingRate; /**< Sampling rate of the source data */ - OMX_U16 nBlockAlign; /**< is the block alignment, or block size, in bytes of the audio codec */ - OMX_U16 nEncodeOptions; /**< WMA Type-specific data */ - OMX_U32 nSuperBlockAlign; /**< WMA Type-specific data */ -} OMX_AUDIO_PARAM_WMATYPE; - -/** - * RealAudio format - */ -typedef enum OMX_AUDIO_RAFORMATTYPE { - OMX_AUDIO_RAFormatUnused = 0, /**< Format unused or unknown */ - OMX_AUDIO_RA8, /**< RealAudio 8 codec */ - OMX_AUDIO_RA9, /**< RealAudio 9 codec */ - OMX_AUDIO_RA10_AAC, /**< MPEG-4 AAC codec for bitrates of more than 128kbps */ - OMX_AUDIO_RA10_CODEC, /**< RealAudio codec for bitrates less than 128 kbps */ - OMX_AUDIO_RA10_LOSSLESS, /**< RealAudio Lossless */ - OMX_AUDIO_RA10_MULTICHANNEL, /**< RealAudio Multichannel */ - OMX_AUDIO_RA10_VOICE, /**< RealAudio Voice for bitrates below 15 kbps */ - OMX_AUDIO_RAFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_AUDIO_RAFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_VIDEO_RAFormatMax = 0x7FFFFFFF -} OMX_AUDIO_RAFORMATTYPE; - -/** RA (Real Audio) params */ -typedef struct OMX_AUDIO_PARAM_RATYPE { - OMX_U32 nSize; /**< Size of this structure, in Bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< Port that this structure applies to */ - OMX_U32 nChannels; /**< Number of channels */ - OMX_U32 nSamplingRate; /**< is the sampling rate of the source data */ - OMX_U32 nBitsPerFrame; /**< is the value for bits per frame */ - OMX_U32 nSamplePerFrame; /**< is the value for samples per frame */ - OMX_U32 nCouplingQuantBits; /**< is the number of coupling quantization bits in the stream */ - OMX_U32 nCouplingStartRegion; /**< is the coupling start region in the stream */ - OMX_U32 nNumRegions; /**< is the number of regions value */ - OMX_AUDIO_RAFORMATTYPE eFormat; /**< is the RealAudio audio format */ -} OMX_AUDIO_PARAM_RATYPE; - - -/** SBC Allocation Method Type */ -typedef enum OMX_AUDIO_SBCALLOCMETHODTYPE { - OMX_AUDIO_SBCAllocMethodLoudness, /**< Loudness allocation method */ - OMX_AUDIO_SBCAllocMethodSNR, /**< SNR allocation method */ - OMX_AUDIO_SBCAllocMethodKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_AUDIO_SBCAllocMethodVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_AUDIO_SBCAllocMethodMax = 0x7FFFFFFF -} OMX_AUDIO_SBCALLOCMETHODTYPE; - - -/** SBC params */ -typedef struct OMX_AUDIO_PARAM_SBCTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nChannels; /**< Number of channels */ - OMX_U32 nBitRate; /**< Bit rate of the input data. Use 0 for variable - rate or unknown bit rates */ - OMX_U32 nSampleRate; /**< Sampling rate of the source data. Use 0 for - variable or unknown sampling rate. */ - OMX_U32 nBlocks; /**< Number of blocks */ - OMX_U32 nSubbands; /**< Number of subbands */ - OMX_U32 nBitPool; /**< Bitpool value */ - OMX_BOOL bEnableBitrate; /**< Use bitrate value instead of bitpool */ - OMX_AUDIO_CHANNELMODETYPE eChannelMode; /**< Channel mode enumeration */ - OMX_AUDIO_SBCALLOCMETHODTYPE eSBCAllocType; /**< SBC Allocation method type */ -} OMX_AUDIO_PARAM_SBCTYPE; - - -/** ADPCM stream format parameters */ -typedef struct OMX_AUDIO_PARAM_ADPCMTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nChannels; /**< Number of channels in the data stream (not - necessarily the same as the number of channels - to be rendered. */ - OMX_U32 nBitsPerSample; /**< Number of bits in each sample */ - OMX_U32 nSampleRate; /**< Sampling rate of the source data. Use 0 for - variable or unknown sampling rate. */ -} OMX_AUDIO_PARAM_ADPCMTYPE; - - -/** G723 rate */ -typedef enum OMX_AUDIO_G723RATE { - OMX_AUDIO_G723ModeUnused = 0, /**< AMRNB Mode unused / unknown */ - OMX_AUDIO_G723ModeLow, /**< 5300 bps */ - OMX_AUDIO_G723ModeHigh, /**< 6300 bps */ - OMX_AUDIO_G723ModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_AUDIO_G723ModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_AUDIO_G723ModeMax = 0x7FFFFFFF -} OMX_AUDIO_G723RATE; - - -/** G723 - Sample rate must be 8 KHz */ -typedef struct OMX_AUDIO_PARAM_G723TYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nChannels; /**< Number of channels in the data stream (not - necessarily the same as the number of channels - to be rendered. */ - OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ - OMX_AUDIO_G723RATE eBitRate; /**< todo: Should this be moved to a config? */ - OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ - OMX_BOOL bPostFilter; /**< Enable Post Filter */ -} OMX_AUDIO_PARAM_G723TYPE; - - -/** ITU G726 (ADPCM) rate */ -typedef enum OMX_AUDIO_G726MODE { - OMX_AUDIO_G726ModeUnused = 0, /**< G726 Mode unused / unknown */ - OMX_AUDIO_G726Mode16, /**< 16 kbps */ - OMX_AUDIO_G726Mode24, /**< 24 kbps */ - OMX_AUDIO_G726Mode32, /**< 32 kbps, most common rate, also G721 */ - OMX_AUDIO_G726Mode40, /**< 40 kbps */ - OMX_AUDIO_G726ModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_AUDIO_G726ModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_AUDIO_G726ModeMax = 0x7FFFFFFF -} OMX_AUDIO_G726MODE; - - -/** G.726 stream format parameters - must be at 8KHz */ -typedef struct OMX_AUDIO_PARAM_G726TYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nChannels; /**< Number of channels in the data stream (not - necessarily the same as the number of channels - to be rendered. */ - OMX_AUDIO_G726MODE eG726Mode; -} OMX_AUDIO_PARAM_G726TYPE; - - -/** G729 coder type */ -typedef enum OMX_AUDIO_G729TYPE { - OMX_AUDIO_G729 = 0, /**< ITU G.729 encoded data */ - OMX_AUDIO_G729A, /**< ITU G.729 annex A encoded data */ - OMX_AUDIO_G729B, /**< ITU G.729 with annex B encoded data */ - OMX_AUDIO_G729AB, /**< ITU G.729 annexes A and B encoded data */ - OMX_AUDIO_G729KhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_AUDIO_G729VendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_AUDIO_G729Max = 0x7FFFFFFF -} OMX_AUDIO_G729TYPE; - - -/** G729 stream format parameters - fixed 6KHz sample rate */ -typedef struct OMX_AUDIO_PARAM_G729TYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nChannels; /**< Number of channels in the data stream (not - necessarily the same as the number of channels - to be rendered. */ - OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ - OMX_AUDIO_G729TYPE eBitType; -} OMX_AUDIO_PARAM_G729TYPE; - - -/** AMR Frame format */ -typedef enum OMX_AUDIO_AMRFRAMEFORMATTYPE { - OMX_AUDIO_AMRFrameFormatConformance = 0, /**< Frame Format is AMR Conformance - (Standard) Format */ - OMX_AUDIO_AMRFrameFormatIF1, /**< Frame Format is AMR Interface - Format 1 */ - OMX_AUDIO_AMRFrameFormatIF2, /**< Frame Format is AMR Interface - Format 2*/ - OMX_AUDIO_AMRFrameFormatFSF, /**< Frame Format is AMR File Storage - Format */ - OMX_AUDIO_AMRFrameFormatRTPPayload, /**< Frame Format is AMR Real-Time - Transport Protocol Payload Format */ - OMX_AUDIO_AMRFrameFormatITU, /**< Frame Format is ITU Format (added at Motorola request) */ - OMX_AUDIO_AMRFrameFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_AUDIO_AMRFrameFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_AUDIO_AMRFrameFormatMax = 0x7FFFFFFF -} OMX_AUDIO_AMRFRAMEFORMATTYPE; - - -/** AMR band mode */ -typedef enum OMX_AUDIO_AMRBANDMODETYPE { - OMX_AUDIO_AMRBandModeUnused = 0, /**< AMRNB Mode unused / unknown */ - OMX_AUDIO_AMRBandModeNB0, /**< AMRNB Mode 0 = 4750 bps */ - OMX_AUDIO_AMRBandModeNB1, /**< AMRNB Mode 1 = 5150 bps */ - OMX_AUDIO_AMRBandModeNB2, /**< AMRNB Mode 2 = 5900 bps */ - OMX_AUDIO_AMRBandModeNB3, /**< AMRNB Mode 3 = 6700 bps */ - OMX_AUDIO_AMRBandModeNB4, /**< AMRNB Mode 4 = 7400 bps */ - OMX_AUDIO_AMRBandModeNB5, /**< AMRNB Mode 5 = 7950 bps */ - OMX_AUDIO_AMRBandModeNB6, /**< AMRNB Mode 6 = 10200 bps */ - OMX_AUDIO_AMRBandModeNB7, /**< AMRNB Mode 7 = 12200 bps */ - OMX_AUDIO_AMRBandModeWB0, /**< AMRWB Mode 0 = 6600 bps */ - OMX_AUDIO_AMRBandModeWB1, /**< AMRWB Mode 1 = 8850 bps */ - OMX_AUDIO_AMRBandModeWB2, /**< AMRWB Mode 2 = 12650 bps */ - OMX_AUDIO_AMRBandModeWB3, /**< AMRWB Mode 3 = 14250 bps */ - OMX_AUDIO_AMRBandModeWB4, /**< AMRWB Mode 4 = 15850 bps */ - OMX_AUDIO_AMRBandModeWB5, /**< AMRWB Mode 5 = 18250 bps */ - OMX_AUDIO_AMRBandModeWB6, /**< AMRWB Mode 6 = 19850 bps */ - OMX_AUDIO_AMRBandModeWB7, /**< AMRWB Mode 7 = 23050 bps */ - OMX_AUDIO_AMRBandModeWB8, /**< AMRWB Mode 8 = 23850 bps */ - OMX_AUDIO_AMRBandModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_AUDIO_AMRBandModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_AUDIO_AMRBandModeMax = 0x7FFFFFFF -} OMX_AUDIO_AMRBANDMODETYPE; - - -/** AMR Discontinuous Transmission mode */ -typedef enum OMX_AUDIO_AMRDTXMODETYPE { - OMX_AUDIO_AMRDTXModeOff = 0, /**< AMR Discontinuous Transmission Mode is disabled */ - OMX_AUDIO_AMRDTXModeOnVAD1, /**< AMR Discontinuous Transmission Mode using - Voice Activity Detector 1 (VAD1) is enabled */ - OMX_AUDIO_AMRDTXModeOnVAD2, /**< AMR Discontinuous Transmission Mode using - Voice Activity Detector 2 (VAD2) is enabled */ - OMX_AUDIO_AMRDTXModeOnAuto, /**< The codec will automatically select between - Off, VAD1 or VAD2 modes */ - - OMX_AUDIO_AMRDTXasEFR, /**< DTX as EFR instead of AMR standard (3GPP 26.101, frame type =8,9,10) */ - - OMX_AUDIO_AMRDTXModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_AUDIO_AMRDTXModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_AUDIO_AMRDTXModeMax = 0x7FFFFFFF -} OMX_AUDIO_AMRDTXMODETYPE; - - -/** AMR params */ -typedef struct OMX_AUDIO_PARAM_AMRTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nChannels; /**< Number of channels */ - OMX_U32 nBitRate; /**< Bit rate read only field */ - OMX_AUDIO_AMRBANDMODETYPE eAMRBandMode; /**< AMR Band Mode enumeration */ - OMX_AUDIO_AMRDTXMODETYPE eAMRDTXMode; /**< AMR DTX Mode enumeration */ - OMX_AUDIO_AMRFRAMEFORMATTYPE eAMRFrameFormat; /**< AMR frame format enumeration */ -} OMX_AUDIO_PARAM_AMRTYPE; - - -/** GSM_FR (ETSI 06.10, 3GPP 46.010) stream format parameters */ -typedef struct OMX_AUDIO_PARAM_GSMFRTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ - OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ -} OMX_AUDIO_PARAM_GSMFRTYPE; - - -/** GSM-HR (ETSI 06.20, 3GPP 46.020) stream format parameters */ -typedef struct OMX_AUDIO_PARAM_GSMHRTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ - OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ -} OMX_AUDIO_PARAM_GSMHRTYPE; - - -/** GSM-EFR (ETSI 06.60, 3GPP 46.060) stream format parameters */ -typedef struct OMX_AUDIO_PARAM_GSMEFRTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ - OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ -} OMX_AUDIO_PARAM_GSMEFRTYPE; - - -/** TDMA FR (TIA/EIA-136-420, VSELP 7.95kbps coder) stream format parameters */ -typedef struct OMX_AUDIO_PARAM_TDMAFRTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nChannels; /**< Number of channels in the data stream (not - necessarily the same as the number of channels - to be rendered. */ - OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ - OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ -} OMX_AUDIO_PARAM_TDMAFRTYPE; - - -/** TDMA EFR (TIA/EIA-136-410, ACELP 7.4kbps coder) stream format parameters */ -typedef struct OMX_AUDIO_PARAM_TDMAEFRTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nChannels; /**< Number of channels in the data stream (not - necessarily the same as the number of channels - to be rendered. */ - OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ - OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ -} OMX_AUDIO_PARAM_TDMAEFRTYPE; - - -/** PDC FR ( RCR-27, VSELP 6.7kbps coder) stream format parameters */ -typedef struct OMX_AUDIO_PARAM_PDCFRTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nChannels; /**< Number of channels in the data stream (not - necessarily the same as the number of channels - to be rendered. */ - OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ - OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ -} OMX_AUDIO_PARAM_PDCFRTYPE; - - -/** PDC EFR ( RCR-27, ACELP 6.7kbps coder) stream format parameters */ -typedef struct OMX_AUDIO_PARAM_PDCEFRTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nChannels; /**< Number of channels in the data stream (not - necessarily the same as the number of channels - to be rendered. */ - OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ - OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ -} OMX_AUDIO_PARAM_PDCEFRTYPE; - -/** PDC HR ( RCR-27, PSI-CELP 3.45kbps coder) stream format parameters */ -typedef struct OMX_AUDIO_PARAM_PDCHRTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nChannels; /**< Number of channels in the data stream (not - necessarily the same as the number of channels - to be rendered. */ - OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ - OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ -} OMX_AUDIO_PARAM_PDCHRTYPE; - - -/** CDMA Rate types */ -typedef enum OMX_AUDIO_CDMARATETYPE { - OMX_AUDIO_CDMARateBlank = 0, /**< CDMA encoded frame is blank */ - OMX_AUDIO_CDMARateFull, /**< CDMA encoded frame in full rate */ - OMX_AUDIO_CDMARateHalf, /**< CDMA encoded frame in half rate */ - OMX_AUDIO_CDMARateQuarter, /**< CDMA encoded frame in quarter rate */ - OMX_AUDIO_CDMARateEighth, /**< CDMA encoded frame in eighth rate (DTX)*/ - OMX_AUDIO_CDMARateErasure, /**< CDMA erasure frame */ - OMX_AUDIO_CDMARateKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_AUDIO_CDMARateVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_AUDIO_CDMARateMax = 0x7FFFFFFF -} OMX_AUDIO_CDMARATETYPE; - - -/** QCELP8 (TIA/EIA-96, up to 8kbps coder) stream format parameters */ -typedef struct OMX_AUDIO_PARAM_QCELP8TYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nChannels; /**< Number of channels in the data stream (not - necessarily the same as the number of channels - to be rendered. */ - OMX_U32 nBitRate; /**< Bit rate of the input data. Use 0 for variable - rate or unknown bit rates */ - OMX_AUDIO_CDMARATETYPE eCDMARate; /**< Frame rate */ - OMX_U32 nMinBitRate; /**< minmal rate for the encoder = 1,2,3,4, default = 1 */ - OMX_U32 nMaxBitRate; /**< maximal rate for the encoder = 1,2,3,4, default = 4 */ -} OMX_AUDIO_PARAM_QCELP8TYPE; - - -/** QCELP13 ( CDMA, EIA/TIA-733, 13.3kbps coder) stream format parameters */ -typedef struct OMX_AUDIO_PARAM_QCELP13TYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nChannels; /**< Number of channels in the data stream (not - necessarily the same as the number of channels - to be rendered. */ - OMX_AUDIO_CDMARATETYPE eCDMARate; /**< Frame rate */ - OMX_U32 nMinBitRate; /**< minmal rate for the encoder = 1,2,3,4, default = 1 */ - OMX_U32 nMaxBitRate; /**< maximal rate for the encoder = 1,2,3,4, default = 4 */ -} OMX_AUDIO_PARAM_QCELP13TYPE; - - -/** EVRC ( CDMA, EIA/TIA-127, RCELP up to 8.55kbps coder) stream format parameters */ -typedef struct OMX_AUDIO_PARAM_EVRCTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nChannels; /**< Number of channels in the data stream (not - necessarily the same as the number of channels - to be rendered. */ - OMX_AUDIO_CDMARATETYPE eCDMARate; /**< actual Frame rate */ - OMX_BOOL bRATE_REDUCon; /**< RATE_REDUCtion is requested for this frame */ - OMX_U32 nMinBitRate; /**< minmal rate for the encoder = 1,2,3,4, default = 1 */ - OMX_U32 nMaxBitRate; /**< maximal rate for the encoder = 1,2,3,4, default = 4 */ - OMX_BOOL bHiPassFilter; /**< Enable encoder's High Pass Filter */ - OMX_BOOL bNoiseSuppressor; /**< Enable encoder's noise suppressor pre-processing */ - OMX_BOOL bPostFilter; /**< Enable decoder's post Filter */ -} OMX_AUDIO_PARAM_EVRCTYPE; - - -/** SMV ( up to 8.55kbps coder) stream format parameters */ -typedef struct OMX_AUDIO_PARAM_SMVTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nChannels; /**< Number of channels in the data stream (not - necessarily the same as the number of channels - to be rendered. */ - OMX_AUDIO_CDMARATETYPE eCDMARate; /**< Frame rate */ - OMX_BOOL bRATE_REDUCon; /**< RATE_REDUCtion is requested for this frame */ - OMX_U32 nMinBitRate; /**< minmal rate for the encoder = 1,2,3,4, default = 1 ??*/ - OMX_U32 nMaxBitRate; /**< maximal rate for the encoder = 1,2,3,4, default = 4 ??*/ - OMX_BOOL bHiPassFilter; /**< Enable encoder's High Pass Filter ??*/ - OMX_BOOL bNoiseSuppressor; /**< Enable encoder's noise suppressor pre-processing */ - OMX_BOOL bPostFilter; /**< Enable decoder's post Filter ??*/ -} OMX_AUDIO_PARAM_SMVTYPE; - - -/** MIDI Format - * @ingroup midi - */ -typedef enum OMX_AUDIO_MIDIFORMATTYPE -{ - OMX_AUDIO_MIDIFormatUnknown = 0, /**< MIDI Format unknown or don't care */ - OMX_AUDIO_MIDIFormatSMF0, /**< Standard MIDI File Type 0 */ - OMX_AUDIO_MIDIFormatSMF1, /**< Standard MIDI File Type 1 */ - OMX_AUDIO_MIDIFormatSMF2, /**< Standard MIDI File Type 2 */ - OMX_AUDIO_MIDIFormatSPMIDI, /**< SP-MIDI */ - OMX_AUDIO_MIDIFormatXMF0, /**< eXtensible Music Format type 0 */ - OMX_AUDIO_MIDIFormatXMF1, /**< eXtensible Music Format type 1 */ - OMX_AUDIO_MIDIFormatMobileXMF, /**< Mobile XMF (eXtensible Music Format type 2) */ - OMX_AUDIO_MIDIFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_AUDIO_MIDIFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_AUDIO_MIDIFormatMax = 0x7FFFFFFF -} OMX_AUDIO_MIDIFORMATTYPE; - - -/** MIDI params - * @ingroup midi - */ -typedef struct OMX_AUDIO_PARAM_MIDITYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nFileSize; /**< size of the MIDI file in bytes, where the entire - MIDI file passed in, otherwise if 0x0, the MIDI data - is merged and streamed (instead of passed as an - entire MIDI file) */ - OMX_BU32 sMaxPolyphony; /**< Specifies the maximum simultaneous polyphonic - voices. A value of zero indicates that the default - polyphony of the device is used */ - OMX_BOOL bLoadDefaultSound; /**< Whether to load default sound - bank at initialization */ - OMX_AUDIO_MIDIFORMATTYPE eMidiFormat; /**< Version of the MIDI file */ -} OMX_AUDIO_PARAM_MIDITYPE; - - -/** Type of the MIDI sound bank - * @ingroup midi - */ -typedef enum OMX_AUDIO_MIDISOUNDBANKTYPE { - OMX_AUDIO_MIDISoundBankUnused = 0, /**< unused/unknown soundbank type */ - OMX_AUDIO_MIDISoundBankDLS1, /**< DLS version 1 */ - OMX_AUDIO_MIDISoundBankDLS2, /**< DLS version 2 */ - OMX_AUDIO_MIDISoundBankMobileDLSBase, /**< Mobile DLS, using the base functionality */ - OMX_AUDIO_MIDISoundBankMobileDLSPlusOptions, /**< Mobile DLS, using the specification-defined optional feature set */ - OMX_AUDIO_MIDISoundBankKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_AUDIO_MIDISoundBankVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_AUDIO_MIDISoundBankMax = 0x7FFFFFFF -} OMX_AUDIO_MIDISOUNDBANKTYPE; - - -/** Bank Layout describes how bank MSB & LSB are used in the DLS instrument definitions sound bank - * @ingroup midi - */ -typedef enum OMX_AUDIO_MIDISOUNDBANKLAYOUTTYPE { - OMX_AUDIO_MIDISoundBankLayoutUnused = 0, /**< unused/unknown soundbank type */ - OMX_AUDIO_MIDISoundBankLayoutGM, /**< GS layout (based on bank MSB 0x00) */ - OMX_AUDIO_MIDISoundBankLayoutGM2, /**< General MIDI 2 layout (using MSB 0x78/0x79, LSB 0x00) */ - OMX_AUDIO_MIDISoundBankLayoutUser, /**< Does not conform to any bank numbering standards */ - OMX_AUDIO_MIDISoundBankLayoutKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_AUDIO_MIDISoundBankLayoutVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_AUDIO_MIDISoundBankLayoutMax = 0x7FFFFFFF -} OMX_AUDIO_MIDISOUNDBANKLAYOUTTYPE; - - -/** MIDI params to load/unload user soundbank - * @ingroup midi - */ -typedef struct OMX_AUDIO_PARAM_MIDILOADUSERSOUNDTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nDLSIndex; /**< DLS file index to be loaded */ - OMX_U32 nDLSSize; /**< Size in bytes */ - OMX_PTR pDLSData; /**< Pointer to DLS file data */ - OMX_AUDIO_MIDISOUNDBANKTYPE eMidiSoundBank; /**< Midi sound bank type enumeration */ - OMX_AUDIO_MIDISOUNDBANKLAYOUTTYPE eMidiSoundBankLayout; /**< Midi sound bank layout enumeration */ -} OMX_AUDIO_PARAM_MIDILOADUSERSOUNDTYPE; - - -/** Structure for Live MIDI events and MIP messages. - * (MIP = Maximum Instantaneous Polyphony; part of the SP-MIDI standard.) - * @ingroup midi - */ -typedef struct OMX_AUDIO_CONFIG_MIDIIMMEDIATEEVENTTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< Port that this structure applies to */ - OMX_U32 nMidiEventSize; /**< Size of immediate MIDI events or MIP message in bytes */ - OMX_U8 nMidiEvents[1]; /**< MIDI event array to be rendered immediately, or an - array for the MIP message buffer, where the size is - indicated by nMidiEventSize */ -} OMX_AUDIO_CONFIG_MIDIIMMEDIATEEVENTTYPE; - - -/** MIDI sound bank/ program pair in a given channel - * @ingroup midi - */ -typedef struct OMX_AUDIO_CONFIG_MIDISOUNDBANKPROGRAMTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< Port that this structure applies to */ - OMX_U32 nChannel; /**< Valid channel values range from 1 to 16 */ - OMX_U16 nIDProgram; /**< Valid program ID range is 1 to 128 */ - OMX_U16 nIDSoundBank; /**< Sound bank ID */ - OMX_U32 nUserSoundBankIndex;/**< User soundbank index, easier to access soundbanks - by index if multiple banks are present */ -} OMX_AUDIO_CONFIG_MIDISOUNDBANKPROGRAMTYPE; - - -/** MIDI control - * @ingroup midi - */ -typedef struct OMX_AUDIO_CONFIG_MIDICONTROLTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_BS32 sPitchTransposition; /**< Pitch transposition in semitones, stored as Q22.10 - format based on JAVA MMAPI (JSR-135) requirement */ - OMX_BU32 sPlayBackRate; /**< Relative playback rate, stored as Q14.17 fixed-point - number based on JSR-135 requirement */ - OMX_BU32 sTempo ; /**< Tempo in beats per minute (BPM), stored as Q22.10 - fixed-point number based on JSR-135 requirement */ - OMX_U32 nMaxPolyphony; /**< Specifies the maximum simultaneous polyphonic - voices. A value of zero indicates that the default - polyphony of the device is used */ - OMX_U32 nNumRepeat; /**< Number of times to repeat playback */ - OMX_U32 nStopTime; /**< Time in milliseconds to indicate when playback - will stop automatically. Set to zero if not used */ - OMX_U16 nChannelMuteMask; /**< 16 bit mask for channel mute status */ - OMX_U16 nChannelSoloMask; /**< 16 bit mask for channel solo status */ - OMX_U32 nTrack0031MuteMask; /**< 32 bit mask for track mute status. Note: This is for tracks 0-31 */ - OMX_U32 nTrack3263MuteMask; /**< 32 bit mask for track mute status. Note: This is for tracks 32-63 */ - OMX_U32 nTrack0031SoloMask; /**< 32 bit mask for track solo status. Note: This is for tracks 0-31 */ - OMX_U32 nTrack3263SoloMask; /**< 32 bit mask for track solo status. Note: This is for tracks 32-63 */ - -} OMX_AUDIO_CONFIG_MIDICONTROLTYPE; - - -/** MIDI Playback States - * @ingroup midi - */ -typedef enum OMX_AUDIO_MIDIPLAYBACKSTATETYPE { - OMX_AUDIO_MIDIPlayBackStateUnknown = 0, /**< Unknown state or state does not map to - other defined states */ - OMX_AUDIO_MIDIPlayBackStateClosedEngaged, /**< No MIDI resource is currently open. - The MIDI engine is currently processing - MIDI events. */ - OMX_AUDIO_MIDIPlayBackStateParsing, /**< A MIDI resource is open and is being - primed. The MIDI engine is currently - processing MIDI events. */ - OMX_AUDIO_MIDIPlayBackStateOpenEngaged, /**< A MIDI resource is open and primed but - not playing. The MIDI engine is currently - processing MIDI events. The transition to - this state is only possible from the - OMX_AUDIO_MIDIPlayBackStatePlaying state, - when the 'playback head' reaches the end - of media data or the playback stops due - to stop time set.*/ - OMX_AUDIO_MIDIPlayBackStatePlaying, /**< A MIDI resource is open and currently - playing. The MIDI engine is currently - processing MIDI events.*/ - OMX_AUDIO_MIDIPlayBackStatePlayingPartially, /**< Best-effort playback due to SP-MIDI/DLS - resource constraints */ - OMX_AUDIO_MIDIPlayBackStatePlayingSilently, /**< Due to system resource constraints and - SP-MIDI content constraints, there is - no audible MIDI content during playback - currently. The situation may change if - resources are freed later.*/ - OMX_AUDIO_MIDIPlayBackStateKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_AUDIO_MIDIPlayBackStateVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_AUDIO_MIDIPlayBackStateMax = 0x7FFFFFFF -} OMX_AUDIO_MIDIPLAYBACKSTATETYPE; - - -/** MIDI status - * @ingroup midi - */ -typedef struct OMX_AUDIO_CONFIG_MIDISTATUSTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U16 nNumTracks; /**< Number of MIDI tracks in the file, read only field. - NOTE: May not return a meaningful value until the entire - file is parsed and buffered. */ - OMX_U32 nDuration; /**< The length of the currently open MIDI resource - in milliseconds. NOTE: May not return a meaningful value - until the entire file is parsed and buffered. */ - OMX_U32 nPosition; /**< Current Position of the MIDI resource being played - in milliseconds */ - OMX_BOOL bVibra; /**< Does Vibra track exist? NOTE: May not return a meaningful - value until the entire file is parsed and buffered. */ - OMX_U32 nNumMetaEvents; /**< Total number of MIDI Meta Events in the currently - open MIDI resource. NOTE: May not return a meaningful value - until the entire file is parsed and buffered. */ - OMX_U32 nNumActiveVoices; /**< Number of active voices in the currently playing - MIDI resource. NOTE: May not return a meaningful value until - the entire file is parsed and buffered. */ - OMX_AUDIO_MIDIPLAYBACKSTATETYPE eMIDIPlayBackState; /**< MIDI playback state enumeration, read only field */ -} OMX_AUDIO_CONFIG_MIDISTATUSTYPE; - - -/** MIDI Meta Event structure one per Meta Event. - * MIDI Meta Events are like audio metadata, except that they are interspersed - * with the MIDI content throughout the file and are not localized in the header. - * As such, it is necessary to retrieve information about these Meta Events from - * the engine, as it encounters these Meta Events within the MIDI content. - * For example, SMF files can have up to 14 types of MIDI Meta Events (copyright, - * author, default tempo, etc.) scattered throughout the file. - * @ingroup midi - */ -typedef struct OMX_AUDIO_CONFIG_MIDIMETAEVENTTYPE{ - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nIndex; /**< Index of Meta Event */ - OMX_U8 nMetaEventType; /**< Meta Event Type, 7bits (i.e. 0 - 127) */ - OMX_U32 nMetaEventSize; /**< size of the Meta Event in bytes */ - OMX_U32 nTrack; /**< track number for the meta event */ - OMX_U32 nPosition; /**< Position of the meta-event in milliseconds */ -} OMX_AUDIO_CONFIG_MIDIMETAEVENTTYPE; - - -/** MIDI Meta Event Data structure - one per Meta Event. - * @ingroup midi - */ -typedef struct OMX_AUDIO_CONFIG_MIDIMETAEVENTDATATYPE{ - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nIndex; /**< Index of Meta Event */ - OMX_U32 nMetaEventSize; /**< size of the Meta Event in bytes */ - OMX_U8 nData[1]; /**< array of one or more bytes of meta data - as indicated by the nMetaEventSize field */ -} OMX_AUDIO_CONFIG__MIDIMETAEVENTDATATYPE; - - -/** Audio Volume adjustment for a port */ -typedef struct OMX_AUDIO_CONFIG_VOLUMETYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< Port index indicating which port to - set. Select the input port to set - just that port's volume. Select the - output port to adjust the master - volume. */ - OMX_BOOL bLinear; /**< Is the volume to be set in linear (0.100) - or logarithmic scale (mB) */ - OMX_BS32 sVolume; /**< Volume linear setting in the 0..100 range, OR - Volume logarithmic setting for this port. The values - for volume are in mB (millibels = 1/100 dB) relative - to a gain of 1 (e.g. the output is the same as the - input level). Values are in mB from nMax - (maximum volume) to nMin mB (typically negative). - Since the volume is "voltage" - and not a "power", it takes a setting of - -600 mB to decrease the volume by 1/2. If - a component cannot accurately set the - volume to the requested value, it must - set the volume to the closest value BELOW - the requested value. When getting the - volume setting, the current actual volume - must be returned. */ -} OMX_AUDIO_CONFIG_VOLUMETYPE; - - -/** Audio Volume adjustment for a channel */ -typedef struct OMX_AUDIO_CONFIG_CHANNELVOLUMETYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< Port index indicating which port to - set. Select the input port to set - just that port's volume. Select the - output port to adjust the master - volume. */ - OMX_U32 nChannel; /**< channel to select from 0 to N-1, - using OMX_ALL to apply volume settings - to all channels */ - OMX_BOOL bLinear; /**< Is the volume to be set in linear (0.100) or - logarithmic scale (mB) */ - OMX_BS32 sVolume; /**< Volume linear setting in the 0..100 range, OR - Volume logarithmic setting for this port. - The values for volume are in mB - (millibels = 1/100 dB) relative to a gain - of 1 (e.g. the output is the same as the - input level). Values are in mB from nMax - (maximum volume) to nMin mB (typically negative). - Since the volume is "voltage" - and not a "power", it takes a setting of - -600 mB to decrease the volume by 1/2. If - a component cannot accurately set the - volume to the requested value, it must - set the volume to the closest value BELOW - the requested value. When getting the - volume setting, the current actual volume - must be returned. */ - OMX_BOOL bIsMIDI; /**< TRUE if nChannel refers to a MIDI channel, - FALSE otherwise */ -} OMX_AUDIO_CONFIG_CHANNELVOLUMETYPE; - - -/** Audio balance setting */ -typedef struct OMX_AUDIO_CONFIG_BALANCETYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< Port index indicating which port to - set. Select the input port to set - just that port's balance. Select the - output port to adjust the master - balance. */ - OMX_S32 nBalance; /**< balance setting for this port - (-100 to 100, where -100 indicates - all left, and no right */ -} OMX_AUDIO_CONFIG_BALANCETYPE; - - -/** Audio Port mute */ -typedef struct OMX_AUDIO_CONFIG_MUTETYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< Port index indicating which port to - set. Select the input port to set - just that port's mute. Select the - output port to adjust the master - mute. */ - OMX_BOOL bMute; /**< Mute setting for this port */ -} OMX_AUDIO_CONFIG_MUTETYPE; - - -/** Audio Channel mute */ -typedef struct OMX_AUDIO_CONFIG_CHANNELMUTETYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nChannel; /**< channel to select from 0 to N-1, - using OMX_ALL to apply mute settings - to all channels */ - OMX_BOOL bMute; /**< Mute setting for this channel */ - OMX_BOOL bIsMIDI; /**< TRUE if nChannel refers to a MIDI channel, - FALSE otherwise */ -} OMX_AUDIO_CONFIG_CHANNELMUTETYPE; - - - -/** Enable / Disable for loudness control, which boosts bass and to a - * smaller extent high end frequencies to compensate for hearing - * ability at the extreme ends of the audio spectrum - */ -typedef struct OMX_AUDIO_CONFIG_LOUDNESSTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_BOOL bLoudness; /**< Enable/disable for loudness */ -} OMX_AUDIO_CONFIG_LOUDNESSTYPE; - - -/** Enable / Disable for bass, which controls low frequencies - */ -typedef struct OMX_AUDIO_CONFIG_BASSTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_BOOL bEnable; /**< Enable/disable for bass control */ - OMX_S32 nBass; /**< bass setting for the port, as a - continuous value from -100 to 100 - (0 means no change in bass level)*/ -} OMX_AUDIO_CONFIG_BASSTYPE; - - -/** Enable / Disable for treble, which controls high frequencies tones - */ -typedef struct OMX_AUDIO_CONFIG_TREBLETYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_BOOL bEnable; /**< Enable/disable for treble control */ - OMX_S32 nTreble; /**< treble setting for the port, as a - continuous value from -100 to 100 - (0 means no change in treble level) */ -} OMX_AUDIO_CONFIG_TREBLETYPE; - - -/** An equalizer is typically used for two reasons: to compensate for an - * sub-optimal frequency response of a system to make it sound more natural - * or to create intentionally some unnatural coloring to the sound to create - * an effect. - * @ingroup effects - */ -typedef struct OMX_AUDIO_CONFIG_EQUALIZERTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_BOOL bEnable; /**< Enable/disable for equalizer */ - OMX_BU32 sBandIndex; /**< Band number to be set. Upper Limit is - N-1, where N is the number of bands, lower limit is 0 */ - OMX_BU32 sCenterFreq; /**< Center frequecies in Hz. This is a - read only element and is used to determine - the lower, center and upper frequency of - this band. */ - OMX_BS32 sBandLevel; /**< band level in millibels */ -} OMX_AUDIO_CONFIG_EQUALIZERTYPE; - - -/** Stereo widening mode type - * @ingroup effects - */ -typedef enum OMX_AUDIO_STEREOWIDENINGTYPE { - OMX_AUDIO_StereoWideningHeadphones, /**< Stereo widening for loudspeakers */ - OMX_AUDIO_StereoWideningLoudspeakers, /**< Stereo widening for closely spaced loudspeakers */ - OMX_AUDIO_StereoWideningKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_AUDIO_StereoWideningVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_AUDIO_StereoWideningMax = 0x7FFFFFFF -} OMX_AUDIO_STEREOWIDENINGTYPE; - - -/** Control for stereo widening, which is a special 2-channel - * case of the audio virtualizer effect. For example, for 5.1-channel - * output, it translates to virtual surround sound. - * @ingroup effects - */ -typedef struct OMX_AUDIO_CONFIG_STEREOWIDENINGTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_BOOL bEnable; /**< Enable/disable for stereo widening control */ - OMX_AUDIO_STEREOWIDENINGTYPE eWideningType; /**< Stereo widening algorithm type */ - OMX_U32 nStereoWidening; /**< stereo widening setting for the port, - as a continuous value from 0 to 100 */ -} OMX_AUDIO_CONFIG_STEREOWIDENINGTYPE; - - -/** The chorus effect (or ``choralizer'') is any signal processor which makes - * one sound source (such as a voice) sound like many such sources singing - * (or playing) in unison. Since performance in unison is never exact, chorus - * effects simulate this by making independently modified copies of the input - * signal. Modifications may include (1) delay, (2) frequency shift, and - * (3) amplitude modulation. - * @ingroup effects - */ -typedef struct OMX_AUDIO_CONFIG_CHORUSTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_BOOL bEnable; /**< Enable/disable for chorus */ - OMX_BU32 sDelay; /**< average delay in milliseconds */ - OMX_BU32 sModulationRate; /**< rate of modulation in millihertz */ - OMX_U32 nModulationDepth; /**< depth of modulation as a percentage of - delay (i.e. 0 to 100) */ - OMX_BU32 nFeedback; /**< Feedback from chorus output to input in percentage */ -} OMX_AUDIO_CONFIG_CHORUSTYPE; - - -/** Reverberation is part of the reflected sound that follows the early - * reflections. In a typical room, this consists of a dense succession of - * echoes whose energy decays exponentially. The reverberation effect structure - * as defined here includes both (early) reflections as well as (late) reverberations. - * @ingroup effects - */ -typedef struct OMX_AUDIO_CONFIG_REVERBERATIONTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_BOOL bEnable; /**< Enable/disable for reverberation control */ - OMX_BS32 sRoomLevel; /**< Intensity level for the whole room effect - (i.e. both early reflections and late - reverberation) in millibels */ - OMX_BS32 sRoomHighFreqLevel; /**< Attenuation at high frequencies - relative to the intensity at low - frequencies in millibels */ - OMX_BS32 sReflectionsLevel; /**< Intensity level of early reflections - (relative to room value), in millibels */ - OMX_BU32 sReflectionsDelay; /**< Delay time of the first reflection relative - to the direct path, in milliseconds */ - OMX_BS32 sReverbLevel; /**< Intensity level of late reverberation - relative to room level, in millibels */ - OMX_BU32 sReverbDelay; /**< Time delay from the first early reflection - to the beginning of the late reverberation - section, in milliseconds */ - OMX_BU32 sDecayTime; /**< Late reverberation decay time at low - frequencies, in milliseconds */ - OMX_BU32 nDecayHighFreqRatio; /**< Ratio of high frequency decay time relative - to low frequency decay time in percent */ - OMX_U32 nDensity; /**< Modal density in the late reverberation decay, - in percent (i.e. 0 - 100) */ - OMX_U32 nDiffusion; /**< Echo density in the late reverberation decay, - in percent (i.e. 0 - 100) */ - OMX_BU32 sReferenceHighFreq; /**< Reference high frequency in Hertz. This is - the frequency used as the reference for all - the high-frequency settings above */ - -} OMX_AUDIO_CONFIG_REVERBERATIONTYPE; - - -/** Possible settings for the Echo Cancelation structure to use - * @ingroup effects - */ -typedef enum OMX_AUDIO_ECHOCANTYPE { - OMX_AUDIO_EchoCanOff = 0, /**< Echo Cancellation is disabled */ - OMX_AUDIO_EchoCanNormal, /**< Echo Cancellation normal operation - - echo from plastics and face */ - OMX_AUDIO_EchoCanHFree, /**< Echo Cancellation optimized for - Hands Free operation */ - OMX_AUDIO_EchoCanCarKit, /**< Echo Cancellation optimized for - Car Kit (longer echo) */ - OMX_AUDIO_EchoCanKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_AUDIO_EchoCanVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_AUDIO_EchoCanMax = 0x7FFFFFFF -} OMX_AUDIO_ECHOCANTYPE; - - -/** Enable / Disable for echo cancelation, which removes undesired echo's - * from the audio - * @ingroup effects - */ -typedef struct OMX_AUDIO_CONFIG_ECHOCANCELATIONTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_AUDIO_ECHOCANTYPE eEchoCancelation; /**< Echo cancelation settings */ -} OMX_AUDIO_CONFIG_ECHOCANCELATIONTYPE; - - -/** Enable / Disable for noise reduction, which undesired noise from - * the audio - * @ingroup effects - */ -typedef struct OMX_AUDIO_CONFIG_NOISEREDUCTIONTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_BOOL bNoiseReduction; /**< Enable/disable for noise reduction */ -} OMX_AUDIO_CONFIG_NOISEREDUCTIONTYPE; - -/** @} */ - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif -/* File EOF */ diff --git a/phonelibs/android_frameworks_native/include/media/openmax/OMX_AudioExt.h b/phonelibs/android_frameworks_native/include/media/openmax/OMX_AudioExt.h deleted file mode 100644 index 2a1c3f2e..00000000 --- a/phonelibs/android_frameworks_native/include/media/openmax/OMX_AudioExt.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * Copyright (c) 2010 The Khronos Group Inc. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation the rights to use, copy, modify, merge, publish, - * distribute, sublicense, and/or sell copies of the Software, and to - * permit persons to whom the Software is furnished to do so, subject - * to the following conditions: - * The above copyright notice and this permission notice shall be included - * in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. - * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY - * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, - * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE - * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - */ - -/** OMX_AudioExt.h - OpenMax IL version 1.1.2 - * The OMX_AudioExt header file contains extensions to the - * definitions used by both the application and the component to - * access video items. - */ - -#ifndef OMX_AudioExt_h -#define OMX_AudioExt_h - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/* Each OMX header shall include all required header files to allow the - * header to compile without errors. The includes below are required - * for this header file to compile successfully - */ -#include - -#define OMX_AUDIO_AACToolAndroidSSBR (OMX_AUDIO_AACToolVendor << 0) /**< SSBR: MPEG-4 Single-rate (downsampled) Spectral Band Replication tool allowed or active */ -#define OMX_AUDIO_AACToolAndroidDSBR (OMX_AUDIO_AACToolVendor << 1) /**< DSBR: MPEG-4 Dual-rate Spectral Band Replication tool allowed or active */ - -typedef enum OMX_AUDIO_CODINGEXTTYPE { - OMX_AUDIO_CodingAndroidUnused = OMX_AUDIO_CodingKhronosExtensions + 0x00100000, - OMX_AUDIO_CodingAndroidAC3, /**< AC3 encoded data */ - OMX_AUDIO_CodingAndroidOPUS, /**< OPUS encoded data */ - OMX_AUDIO_CodingAndroidEAC3, /**< EAC3 encoded data */ -} OMX_AUDIO_CODINGEXTTYPE; - -typedef struct OMX_AUDIO_PARAM_ANDROID_AC3TYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nChannels; /**< Number of channels */ - OMX_U32 nSampleRate; /**< Sampling rate of the source data. Use 0 for - variable or unknown sampling rate. */ -} OMX_AUDIO_PARAM_ANDROID_AC3TYPE; - -typedef struct OMX_AUDIO_PARAM_ANDROID_EAC3TYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nChannels; /**< Number of channels */ - OMX_U32 nSampleRate; /**< Sampling rate of the source data. Use 0 for - variable or unknown sampling rate. */ -} OMX_AUDIO_PARAM_ANDROID_EAC3TYPE; - -typedef struct OMX_AUDIO_PARAM_ANDROID_OPUSTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nChannels; /**< Number of channels */ - OMX_U32 nBitRate; /**< Bit rate of the encoded data data. Use 0 for variable - rate or unknown bit rates. Encoding is set to the - bitrate closest to specified value (in bps) */ - OMX_U32 nSampleRate; /**< Sampling rate of the source data. Use 0 for - variable or unknown sampling rate. */ - OMX_U32 nAudioBandWidth; /**< Audio band width (in Hz) to which an encoder should - limit the audio signal. Use 0 to let encoder decide */ -} OMX_AUDIO_PARAM_ANDROID_OPUSTYPE; - -typedef struct OMX_AUDIO_PARAM_ANDROID_AACPRESENTATIONTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_S32 nMaxOutputChannels; /**< Maximum channel count to be output, -1 if unspecified, 0 if downmixing disabled */ - OMX_S32 nDrcCut; /**< The DRC attenuation factor, between 0 and 127, -1 if unspecified */ - OMX_S32 nDrcBoost; /**< The DRC amplification factor, between 0 and 127, -1 if unspecified */ - OMX_S32 nHeavyCompression; /**< 0 for light compression, 1 for heavy compression, -1 if unspecified */ - OMX_S32 nTargetReferenceLevel; /**< Target reference level, between 0 and 127, -1 if unspecified */ - OMX_S32 nEncodedTargetLevel; /**< Target reference level assumed at the encoder, between 0 and 127, -1 if unspecified */ - OMX_S32 nPCMLimiterEnable; /**< Signal level limiting, 0 for disable, 1 for enable, -1 if unspecified */ -} OMX_AUDIO_PARAM_ANDROID_AACPRESENTATIONTYPE; - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif /* OMX_AudioExt_h */ -/* File EOF */ diff --git a/phonelibs/android_frameworks_native/include/media/openmax/OMX_Component.h b/phonelibs/android_frameworks_native/include/media/openmax/OMX_Component.h deleted file mode 100644 index 0dc2c769..00000000 --- a/phonelibs/android_frameworks_native/include/media/openmax/OMX_Component.h +++ /dev/null @@ -1,596 +0,0 @@ -/* ------------------------------------------------------------------ - * Copyright (C) 1998-2009 PacketVideo - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either - * express or implied. - * See the License for the specific language governing permissions - * and limitations under the License. - * ------------------------------------------------------------------- - */ -/* - * Copyright (c) 2008 The Khronos Group Inc. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation the rights to use, copy, modify, merge, publish, - * distribute, sublicense, and/or sell copies of the Software, and to - * permit persons to whom the Software is furnished to do so, subject - * to the following conditions: - * The above copyright notice and this permission notice shall be included - * in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. - * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY - * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, - * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE - * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - */ - -/** OMX_Component.h - OpenMax IL version 1.1.2 - * The OMX_Component header file contains the definitions used to define - * the public interface of a component. This header file is intended to - * be used by both the application and the component. - */ - -#ifndef OMX_Component_h -#define OMX_Component_h - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - - - -/* Each OMX header must include all required header files to allow the - * header to compile without errors. The includes below are required - * for this header file to compile successfully - */ - -#include -#include -#include -#include - -/** @ingroup comp */ -typedef enum OMX_PORTDOMAINTYPE { - OMX_PortDomainAudio, - OMX_PortDomainVideo, - OMX_PortDomainImage, - OMX_PortDomainOther, - OMX_PortDomainKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_PortDomainVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_PortDomainMax = 0x7ffffff -} OMX_PORTDOMAINTYPE; - -/** @ingroup comp */ -typedef struct OMX_PARAM_PORTDEFINITIONTYPE { - OMX_U32 nSize; /**< Size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< Port number the structure applies to */ - OMX_DIRTYPE eDir; /**< Direction (input or output) of this port */ - OMX_U32 nBufferCountActual; /**< The actual number of buffers allocated on this port */ - OMX_U32 nBufferCountMin; /**< The minimum number of buffers this port requires */ - OMX_U32 nBufferSize; /**< Size, in bytes, for buffers to be used for this channel */ - OMX_BOOL bEnabled; /**< Ports default to enabled and are enabled/disabled by - OMX_CommandPortEnable/OMX_CommandPortDisable. - When disabled a port is unpopulated. A disabled port - is not populated with buffers on a transition to IDLE. */ - OMX_BOOL bPopulated; /**< Port is populated with all of its buffers as indicated by - nBufferCountActual. A disabled port is always unpopulated. - An enabled port is populated on a transition to OMX_StateIdle - and unpopulated on a transition to loaded. */ - OMX_PORTDOMAINTYPE eDomain; /**< Domain of the port. Determines the contents of metadata below. */ - union { - OMX_AUDIO_PORTDEFINITIONTYPE audio; - OMX_VIDEO_PORTDEFINITIONTYPE video; - OMX_IMAGE_PORTDEFINITIONTYPE image; - OMX_OTHER_PORTDEFINITIONTYPE other; - } format; - OMX_BOOL bBuffersContiguous; - OMX_U32 nBufferAlignment; -} OMX_PARAM_PORTDEFINITIONTYPE; - -/** @ingroup comp */ -typedef struct OMX_PARAM_U32TYPE { - OMX_U32 nSize; /**< Size of this structure, in Bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_U32 nU32; /**< U32 value */ -} OMX_PARAM_U32TYPE; - -/** @ingroup rpm */ -typedef enum OMX_SUSPENSIONPOLICYTYPE { - OMX_SuspensionDisabled, /**< No suspension; v1.0 behavior */ - OMX_SuspensionEnabled, /**< Suspension allowed */ - OMX_SuspensionPolicyKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_SuspensionPolicyStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_SuspensionPolicyMax = 0x7fffffff -} OMX_SUSPENSIONPOLICYTYPE; - -/** @ingroup rpm */ -typedef struct OMX_PARAM_SUSPENSIONPOLICYTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_SUSPENSIONPOLICYTYPE ePolicy; -} OMX_PARAM_SUSPENSIONPOLICYTYPE; - -/** @ingroup rpm */ -typedef enum OMX_SUSPENSIONTYPE { - OMX_NotSuspended, /**< component is not suspended */ - OMX_Suspended, /**< component is suspended */ - OMX_SuspensionKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_SuspensionVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_SuspendMax = 0x7FFFFFFF -} OMX_SUSPENSIONTYPE; - -/** @ingroup rpm */ -typedef struct OMX_PARAM_SUSPENSIONTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_SUSPENSIONTYPE eType; -} OMX_PARAM_SUSPENSIONTYPE ; - -typedef struct OMX_CONFIG_BOOLEANTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_BOOL bEnabled; -} OMX_CONFIG_BOOLEANTYPE; - -/* Parameter specifying the content uri to use. */ -/** @ingroup cp */ -typedef struct OMX_PARAM_CONTENTURITYPE -{ - OMX_U32 nSize; /**< size of the structure in bytes, including - actual URI name */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U8 contentURI[1]; /**< The URI name */ -} OMX_PARAM_CONTENTURITYPE; - -/* Parameter specifying the pipe to use. */ -/** @ingroup cp */ -typedef struct OMX_PARAM_CONTENTPIPETYPE -{ - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_HANDLETYPE hPipe; /**< The pipe handle*/ -} OMX_PARAM_CONTENTPIPETYPE; - -/** @ingroup rpm */ -typedef struct OMX_RESOURCECONCEALMENTTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_BOOL bResourceConcealmentForbidden; /**< disallow the use of resource concealment - methods (like degrading algorithm quality to - lower resource consumption or functional bypass) - on a component as a resolution to resource conflicts. */ -} OMX_RESOURCECONCEALMENTTYPE; - - -/** @ingroup metadata */ -typedef enum OMX_METADATACHARSETTYPE { - OMX_MetadataCharsetUnknown = 0, - OMX_MetadataCharsetASCII, - OMX_MetadataCharsetBinary, - OMX_MetadataCharsetCodePage1252, - OMX_MetadataCharsetUTF8, - OMX_MetadataCharsetJavaConformantUTF8, - OMX_MetadataCharsetUTF7, - OMX_MetadataCharsetImapUTF7, - OMX_MetadataCharsetUTF16LE, - OMX_MetadataCharsetUTF16BE, - OMX_MetadataCharsetGB12345, - OMX_MetadataCharsetHZGB2312, - OMX_MetadataCharsetGB2312, - OMX_MetadataCharsetGB18030, - OMX_MetadataCharsetGBK, - OMX_MetadataCharsetBig5, - OMX_MetadataCharsetISO88591, - OMX_MetadataCharsetISO88592, - OMX_MetadataCharsetISO88593, - OMX_MetadataCharsetISO88594, - OMX_MetadataCharsetISO88595, - OMX_MetadataCharsetISO88596, - OMX_MetadataCharsetISO88597, - OMX_MetadataCharsetISO88598, - OMX_MetadataCharsetISO88599, - OMX_MetadataCharsetISO885910, - OMX_MetadataCharsetISO885913, - OMX_MetadataCharsetISO885914, - OMX_MetadataCharsetISO885915, - OMX_MetadataCharsetShiftJIS, - OMX_MetadataCharsetISO2022JP, - OMX_MetadataCharsetISO2022JP1, - OMX_MetadataCharsetISOEUCJP, - OMX_MetadataCharsetSMS7Bit, - OMX_MetadataCharsetKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_MetadataCharsetVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_MetadataCharsetTypeMax= 0x7FFFFFFF -} OMX_METADATACHARSETTYPE; - -/** @ingroup metadata */ -typedef enum OMX_METADATASCOPETYPE -{ - OMX_MetadataScopeAllLevels, - OMX_MetadataScopeTopLevel, - OMX_MetadataScopePortLevel, - OMX_MetadataScopeNodeLevel, - OMX_MetadataScopeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_MetadataScopeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_MetadataScopeTypeMax = 0x7fffffff -} OMX_METADATASCOPETYPE; - -/** @ingroup metadata */ -typedef enum OMX_METADATASEARCHMODETYPE -{ - OMX_MetadataSearchValueSizeByIndex, - OMX_MetadataSearchItemByIndex, - OMX_MetadataSearchNextItemByKey, - OMX_MetadataSearchKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_MetadataSearchVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_MetadataSearchTypeMax = 0x7fffffff -} OMX_METADATASEARCHMODETYPE; -/** @ingroup metadata */ -typedef struct OMX_CONFIG_METADATAITEMCOUNTTYPE -{ - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_METADATASCOPETYPE eScopeMode; - OMX_U32 nScopeSpecifier; - OMX_U32 nMetadataItemCount; -} OMX_CONFIG_METADATAITEMCOUNTTYPE; - -/** @ingroup metadata */ -typedef struct OMX_CONFIG_METADATAITEMTYPE -{ - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_METADATASCOPETYPE eScopeMode; - OMX_U32 nScopeSpecifier; - OMX_U32 nMetadataItemIndex; - OMX_METADATASEARCHMODETYPE eSearchMode; - OMX_METADATACHARSETTYPE eKeyCharset; - OMX_U8 nKeySizeUsed; - OMX_U8 nKey[128]; - OMX_METADATACHARSETTYPE eValueCharset; - OMX_STRING sLanguageCountry; - OMX_U32 nValueMaxSize; - OMX_U32 nValueSizeUsed; - OMX_U8 nValue[1]; -} OMX_CONFIG_METADATAITEMTYPE; - -/* @ingroup metadata */ -typedef struct OMX_CONFIG_CONTAINERNODECOUNTTYPE -{ - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_BOOL bAllKeys; - OMX_U32 nParentNodeID; - OMX_U32 nNumNodes; -} OMX_CONFIG_CONTAINERNODECOUNTTYPE; - -/** @ingroup metadata */ -typedef struct OMX_CONFIG_CONTAINERNODEIDTYPE -{ - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_BOOL bAllKeys; - OMX_U32 nParentNodeID; - OMX_U32 nNodeIndex; - OMX_U32 nNodeID; - OMX_STRING cNodeName; - OMX_BOOL bIsLeafType; -} OMX_CONFIG_CONTAINERNODEIDTYPE; - -/** @ingroup metadata */ -typedef struct OMX_PARAM_METADATAFILTERTYPE -{ - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_BOOL bAllKeys; /* if true then this structure refers to all keys and - * the three key fields below are ignored */ - OMX_METADATACHARSETTYPE eKeyCharset; - OMX_U32 nKeySizeUsed; - OMX_U8 nKey [128]; - OMX_U32 nLanguageCountrySizeUsed; - OMX_U8 nLanguageCountry[128]; - OMX_BOOL bEnabled; /* if true then key is part of filter (e.g. - * retained for query later). If false then - * key is not part of filter */ -} OMX_PARAM_METADATAFILTERTYPE; - -/** The OMX_HANDLETYPE structure defines the component handle. The component - * handle is used to access all of the component's public methods and also - * contains pointers to the component's private data area. The component - * handle is initialized by the OMX core (with help from the component) - * during the process of loading the component. After the component is - * successfully loaded, the application can safely access any of the - * component's public functions (although some may return an error because - * the state is inappropriate for the access). - * - * @ingroup comp - */ -typedef struct OMX_COMPONENTTYPE -{ - /** The size of this structure, in bytes. It is the responsibility - of the allocator of this structure to fill in this value. Since - this structure is allocated by the GetHandle function, this - function will fill in this value. */ - OMX_U32 nSize; - - /** nVersion is the version of the OMX specification that the structure - is built against. It is the responsibility of the creator of this - structure to initialize this value and every user of this structure - should verify that it knows how to use the exact version of - this structure found herein. */ - OMX_VERSIONTYPE nVersion; - - /** pComponentPrivate is a pointer to the component private data area. - This member is allocated and initialized by the component when the - component is first loaded. The application should not access this - data area. */ - OMX_PTR pComponentPrivate; - - /** pApplicationPrivate is a pointer that is a parameter to the - OMX_GetHandle method, and contains an application private value - provided by the IL client. This application private data is - returned to the IL Client by OMX in all callbacks */ - OMX_PTR pApplicationPrivate; - - /** refer to OMX_GetComponentVersion in OMX_core.h or the OMX IL - specification for details on the GetComponentVersion method. - */ - OMX_ERRORTYPE (*GetComponentVersion)( - OMX_IN OMX_HANDLETYPE hComponent, - OMX_OUT OMX_STRING pComponentName, - OMX_OUT OMX_VERSIONTYPE* pComponentVersion, - OMX_OUT OMX_VERSIONTYPE* pSpecVersion, - OMX_OUT OMX_UUIDTYPE* pComponentUUID); - - /** refer to OMX_SendCommand in OMX_core.h or the OMX IL - specification for details on the SendCommand method. - */ - OMX_ERRORTYPE (*SendCommand)( - OMX_IN OMX_HANDLETYPE hComponent, - OMX_IN OMX_COMMANDTYPE Cmd, - OMX_IN OMX_U32 nParam1, - OMX_IN OMX_PTR pCmdData); - - /** refer to OMX_GetParameter in OMX_core.h or the OMX IL - specification for details on the GetParameter method. - */ - OMX_ERRORTYPE (*GetParameter)( - OMX_IN OMX_HANDLETYPE hComponent, - OMX_IN OMX_INDEXTYPE nParamIndex, - OMX_INOUT OMX_PTR pComponentParameterStructure); - - - /** refer to OMX_SetParameter in OMX_core.h or the OMX IL - specification for details on the SetParameter method. - */ - OMX_ERRORTYPE (*SetParameter)( - OMX_IN OMX_HANDLETYPE hComponent, - OMX_IN OMX_INDEXTYPE nIndex, - OMX_IN OMX_PTR pComponentParameterStructure); - - - /** refer to OMX_GetConfig in OMX_core.h or the OMX IL - specification for details on the GetConfig method. - */ - OMX_ERRORTYPE (*GetConfig)( - OMX_IN OMX_HANDLETYPE hComponent, - OMX_IN OMX_INDEXTYPE nIndex, - OMX_INOUT OMX_PTR pComponentConfigStructure); - - - /** refer to OMX_SetConfig in OMX_core.h or the OMX IL - specification for details on the SetConfig method. - */ - OMX_ERRORTYPE (*SetConfig)( - OMX_IN OMX_HANDLETYPE hComponent, - OMX_IN OMX_INDEXTYPE nIndex, - OMX_IN OMX_PTR pComponentConfigStructure); - - - /** refer to OMX_GetExtensionIndex in OMX_core.h or the OMX IL - specification for details on the GetExtensionIndex method. - */ - OMX_ERRORTYPE (*GetExtensionIndex)( - OMX_IN OMX_HANDLETYPE hComponent, - OMX_IN OMX_STRING cParameterName, - OMX_OUT OMX_INDEXTYPE* pIndexType); - - - /** refer to OMX_GetState in OMX_core.h or the OMX IL - specification for details on the GetState method. - */ - OMX_ERRORTYPE (*GetState)( - OMX_IN OMX_HANDLETYPE hComponent, - OMX_OUT OMX_STATETYPE* pState); - - - /** The ComponentTunnelRequest method will interact with another OMX - component to determine if tunneling is possible and to setup the - tunneling. The return codes for this method can be used to - determine if tunneling is not possible, or if tunneling is not - supported. - - Base profile components (i.e. non-interop) do not support this - method and should return OMX_ErrorNotImplemented - - The interop profile component MUST support tunneling to another - interop profile component with a compatible port parameters. - A component may also support proprietary communication. - - If proprietary communication is supported the negotiation of - proprietary communication is done outside of OMX in a vendor - specific way. It is only required that the proper result be - returned and the details of how the setup is done is left - to the component implementation. - - When this method is invoked when nPort in an output port, the - component will: - 1. Populate the pTunnelSetup structure with the output port's - requirements and constraints for the tunnel. - - When this method is invoked when nPort in an input port, the - component will: - 1. Query the necessary parameters from the output port to - determine if the ports are compatible for tunneling - 2. If the ports are compatible, the component should store - the tunnel step provided by the output port - 3. Determine which port (either input or output) is the buffer - supplier, and call OMX_SetParameter on the output port to - indicate this selection. - - The component will return from this call within 5 msec. - - @param [in] hComp - Handle of the component to be accessed. This is the component - handle returned by the call to the OMX_GetHandle method. - @param [in] nPort - nPort is used to select the port on the component to be used - for tunneling. - @param [in] hTunneledComp - Handle of the component to tunnel with. This is the component - handle returned by the call to the OMX_GetHandle method. When - this parameter is 0x0 the component should setup the port for - communication with the application / IL Client. - @param [in] nPortOutput - nPortOutput is used indicate the port the component should - tunnel with. - @param [in] pTunnelSetup - Pointer to the tunnel setup structure. When nPort is an output port - the component should populate the fields of this structure. When - When nPort is an input port the component should review the setup - provided by the component with the output port. - @return OMX_ERRORTYPE - If the command successfully executes, the return code will be - OMX_ErrorNone. Otherwise the appropriate OMX error will be returned. - @ingroup tun - */ - - OMX_ERRORTYPE (*ComponentTunnelRequest)( - OMX_IN OMX_HANDLETYPE hComp, - OMX_IN OMX_U32 nPort, - OMX_IN OMX_HANDLETYPE hTunneledComp, - OMX_IN OMX_U32 nTunneledPort, - OMX_INOUT OMX_TUNNELSETUPTYPE* pTunnelSetup); - - /** refer to OMX_UseBuffer in OMX_core.h or the OMX IL - specification for details on the UseBuffer method. - @ingroup buf - */ - OMX_ERRORTYPE (*UseBuffer)( - OMX_IN OMX_HANDLETYPE hComponent, - OMX_INOUT OMX_BUFFERHEADERTYPE** ppBufferHdr, - OMX_IN OMX_U32 nPortIndex, - OMX_IN OMX_PTR pAppPrivate, - OMX_IN OMX_U32 nSizeBytes, - OMX_IN OMX_U8* pBuffer); - - /** refer to OMX_AllocateBuffer in OMX_core.h or the OMX IL - specification for details on the AllocateBuffer method. - @ingroup buf - */ - OMX_ERRORTYPE (*AllocateBuffer)( - OMX_IN OMX_HANDLETYPE hComponent, - OMX_INOUT OMX_BUFFERHEADERTYPE** ppBuffer, - OMX_IN OMX_U32 nPortIndex, - OMX_IN OMX_PTR pAppPrivate, - OMX_IN OMX_U32 nSizeBytes); - - /** refer to OMX_FreeBuffer in OMX_core.h or the OMX IL - specification for details on the FreeBuffer method. - @ingroup buf - */ - OMX_ERRORTYPE (*FreeBuffer)( - OMX_IN OMX_HANDLETYPE hComponent, - OMX_IN OMX_U32 nPortIndex, - OMX_IN OMX_BUFFERHEADERTYPE* pBuffer); - - /** refer to OMX_EmptyThisBuffer in OMX_core.h or the OMX IL - specification for details on the EmptyThisBuffer method. - @ingroup buf - */ - OMX_ERRORTYPE (*EmptyThisBuffer)( - OMX_IN OMX_HANDLETYPE hComponent, - OMX_IN OMX_BUFFERHEADERTYPE* pBuffer); - - /** refer to OMX_FillThisBuffer in OMX_core.h or the OMX IL - specification for details on the FillThisBuffer method. - @ingroup buf - */ - OMX_ERRORTYPE (*FillThisBuffer)( - OMX_IN OMX_HANDLETYPE hComponent, - OMX_IN OMX_BUFFERHEADERTYPE* pBuffer); - - /** The SetCallbacks method is used by the core to specify the callback - structure from the application to the component. This is a blocking - call. The component will return from this call within 5 msec. - @param [in] hComponent - Handle of the component to be accessed. This is the component - handle returned by the call to the GetHandle function. - @param [in] pCallbacks - pointer to an OMX_CALLBACKTYPE structure used to provide the - callback information to the component - @param [in] pAppData - pointer to an application defined value. It is anticipated that - the application will pass a pointer to a data structure or a "this - pointer" in this area to allow the callback (in the application) - to determine the context of the call - @return OMX_ERRORTYPE - If the command successfully executes, the return code will be - OMX_ErrorNone. Otherwise the appropriate OMX error will be returned. - */ - OMX_ERRORTYPE (*SetCallbacks)( - OMX_IN OMX_HANDLETYPE hComponent, - OMX_IN OMX_CALLBACKTYPE* pCallbacks, - OMX_IN OMX_PTR pAppData); - - /** ComponentDeInit method is used to deinitialize the component - providing a means to free any resources allocated at component - initialization. NOTE: After this call the component handle is - not valid for further use. - @param [in] hComponent - Handle of the component to be accessed. This is the component - handle returned by the call to the GetHandle function. - @return OMX_ERRORTYPE - If the command successfully executes, the return code will be - OMX_ErrorNone. Otherwise the appropriate OMX error will be returned. - */ - OMX_ERRORTYPE (*ComponentDeInit)( - OMX_IN OMX_HANDLETYPE hComponent); - - /** @ingroup buf */ - OMX_ERRORTYPE (*UseEGLImage)( - OMX_IN OMX_HANDLETYPE hComponent, - OMX_INOUT OMX_BUFFERHEADERTYPE** ppBufferHdr, - OMX_IN OMX_U32 nPortIndex, - OMX_IN OMX_PTR pAppPrivate, - OMX_IN void* eglImage); - - OMX_ERRORTYPE (*ComponentRoleEnum)( - OMX_IN OMX_HANDLETYPE hComponent, - OMX_OUT OMX_U8 *cRole, - OMX_IN OMX_U32 nIndex); - -} OMX_COMPONENTTYPE; - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif -/* File EOF */ diff --git a/phonelibs/android_frameworks_native/include/media/openmax/OMX_ContentPipe.h b/phonelibs/android_frameworks_native/include/media/openmax/OMX_ContentPipe.h deleted file mode 100644 index 0224c8a2..00000000 --- a/phonelibs/android_frameworks_native/include/media/openmax/OMX_ContentPipe.h +++ /dev/null @@ -1,212 +0,0 @@ -/* ------------------------------------------------------------------ - * Copyright (C) 1998-2009 PacketVideo - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either - * express or implied. - * See the License for the specific language governing permissions - * and limitations under the License. - * ------------------------------------------------------------------- - */ -/* - * Copyright (c) 2008 The Khronos Group Inc. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation the rights to use, copy, modify, merge, publish, - * distribute, sublicense, and/or sell copies of the Software, and to - * permit persons to whom the Software is furnished to do so, subject - * to the following conditions: - * The above copyright notice and this permission notice shall be included - * in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. - * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY - * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, - * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE - * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - */ - -/** OMX_ContentPipe.h - OpenMax IL version 1.1.2 - * The OMX_ContentPipe header file contains the definitions used to define - * the public interface for content piples. This header file is intended to - * be used by the component. - */ - -#ifndef OMX_CONTENTPIPE_H -#define OMX_CONTENTPIPE_H - -#ifndef KD_EACCES -/* OpenKODE error codes. CPResult values may be zero (indicating success - or one of the following values) */ -#define KD_EACCES (1) -#define KD_EADDRINUSE (2) -#define KD_EAGAIN (5) -#define KD_EBADF (7) -#define KD_EBUSY (8) -#define KD_ECONNREFUSED (9) -#define KD_ECONNRESET (10) -#define KD_EDEADLK (11) -#define KD_EDESTADDRREQ (12) -#define KD_ERANGE (35) -#define KD_EEXIST (13) -#define KD_EFBIG (14) -#define KD_EHOSTUNREACH (15) -#define KD_EINVAL (17) -#define KD_EIO (18) -#define KD_EISCONN (20) -#define KD_EISDIR (21) -#define KD_EMFILE (22) -#define KD_ENAMETOOLONG (23) -#define KD_ENOENT (24) -#define KD_ENOMEM (25) -#define KD_ENOSPC (26) -#define KD_ENOSYS (27) -#define KD_ENOTCONN (28) -#define KD_EPERM (33) -#define KD_ETIMEDOUT (36) -#define KD_EILSEQ (19) -#endif - -/** Map types from OMX standard types only here so interface is as generic as possible. */ -typedef OMX_U32 CPresult; -typedef char * CPstring; -typedef void * CPhandle; -typedef OMX_U32 CPuint; -typedef OMX_S32 CPint; -typedef char CPbyte; -typedef OMX_BOOL CPbool; - -/** enumeration of origin types used in the CP_PIPETYPE's Seek function - * @ingroup cp - */ -typedef enum CP_ORIGINTYPE { - CP_OriginBegin, - CP_OriginCur, - CP_OriginEnd, - CP_OriginKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - CP_OriginVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - CP_OriginMax = 0X7FFFFFFF -} CP_ORIGINTYPE; - -/** enumeration of contact access types used in the CP_PIPETYPE's Open function - * @ingroup cp - */ -typedef enum CP_ACCESSTYPE { - CP_AccessRead, - CP_AccessWrite, - CP_AccessReadWrite, - CP_AccessKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - CP_AccessVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - CP_AccessMax = 0X7FFFFFFF -} CP_ACCESSTYPE; - -/** enumeration of results returned by the CP_PIPETYPE's CheckAvailableBytes function - * @ingroup cp - */ -typedef enum CP_CHECKBYTESRESULTTYPE -{ - CP_CheckBytesOk, /**< There are at least the request number - of bytes available */ - CP_CheckBytesNotReady, /**< The pipe is still retrieving bytes - and presently lacks sufficient bytes. - Client will be called when they are - sufficient bytes are available. */ - CP_CheckBytesInsufficientBytes, /**< The pipe has retrieved all bytes - but those available are less than those - requested */ - CP_CheckBytesAtEndOfStream, /**< The pipe has reached the end of stream - and no more bytes are available. */ - CP_CheckBytesOutOfBuffers, /**< All read/write buffers are currently in use. */ - CP_CheckBytesKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - CP_CheckBytesVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - CP_CheckBytesMax = 0X7FFFFFFF -} CP_CHECKBYTESRESULTTYPE; - -/** enumeration of content pipe events sent to the client callback. - * @ingroup cp - */ -typedef enum CP_EVENTTYPE{ - CP_BytesAvailable, /** bytes requested in a CheckAvailableBytes call are now available*/ - CP_Overflow, /** enumeration of content pipe events sent to the client callback*/ - CP_PipeDisconnected, /** enumeration of content pipe events sent to the client callback*/ - CP_EventKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - CP_EventVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - CP_EventMax = 0X7FFFFFFF -} CP_EVENTTYPE; - -/** content pipe definition - * @ingroup cp - */ -typedef struct CP_PIPETYPE -{ - /** Open a content stream for reading or writing. */ - CPresult (*Open)( CPhandle* hContent, CPstring szURI, CP_ACCESSTYPE eAccess ); - - /** Close a content stream. */ - CPresult (*Close)( CPhandle hContent ); - - /** Create a content source and open it for writing. */ - CPresult (*Create)( CPhandle *hContent, CPstring szURI ); - - /** Check the that specified number of bytes are available for reading or writing (depending on access type).*/ - CPresult (*CheckAvailableBytes)( CPhandle hContent, CPuint nBytesRequested, CP_CHECKBYTESRESULTTYPE *eResult ); - - /** Seek to certain position in the content relative to the specified origin. */ - CPresult (*SetPosition)( CPhandle hContent, CPint nOffset, CP_ORIGINTYPE eOrigin); - - /** Retrieve the current position relative to the start of the content. */ - CPresult (*GetPosition)( CPhandle hContent, CPuint *pPosition); - - /** Retrieve data of the specified size from the content stream (advance content pointer by size of data). - Note: pipe client provides pointer. This function is appropriate for small high frequency reads. */ - CPresult (*Read)( CPhandle hContent, CPbyte *pData, CPuint nSize); - - /** Retrieve a buffer allocated by the pipe that contains the requested number of bytes. - Buffer contains the next block of bytes, as specified by nSize, of the content. nSize also - returns the size of the block actually read. Content pointer advances the by the returned size. - Note: pipe provides pointer. This function is appropriate for large reads. The client must call - ReleaseReadBuffer when done with buffer. - - In some cases the requested block may not reside in contiguous memory within the - pipe implementation. For instance if the pipe leverages a circular buffer then the requested - block may straddle the boundary of the circular buffer. By default a pipe implementation - performs a copy in this case to provide the block to the pipe client in one contiguous buffer. - If, however, the client sets bForbidCopy, then the pipe returns only those bytes preceding the memory - boundary. Here the client may retrieve the data in segments over successive calls. */ - CPresult (*ReadBuffer)( CPhandle hContent, CPbyte **ppBuffer, CPuint *nSize, CPbool bForbidCopy); - - /** Release a buffer obtained by ReadBuffer back to the pipe. */ - CPresult (*ReleaseReadBuffer)(CPhandle hContent, CPbyte *pBuffer); - - /** Write data of the specified size to the content (advance content pointer by size of data). - Note: pipe client provides pointer. This function is appropriate for small high frequency writes. */ - CPresult (*Write)( CPhandle hContent, CPbyte *data, CPuint nSize); - - /** Retrieve a buffer allocated by the pipe used to write data to the content. - Client will fill buffer with output data. Note: pipe provides pointer. This function is appropriate - for large writes. The client must call WriteBuffer when done it has filled the buffer with data.*/ - CPresult (*GetWriteBuffer)( CPhandle hContent, CPbyte **ppBuffer, CPuint nSize); - - /** Deliver a buffer obtained via GetWriteBuffer to the pipe. Pipe will write the - the contents of the buffer to content and advance content pointer by the size of the buffer */ - CPresult (*WriteBuffer)( CPhandle hContent, CPbyte *pBuffer, CPuint nFilledSize); - - /** Register a per-handle client callback with the content pipe. */ - CPresult (*RegisterCallback)( CPhandle hContent, CPresult (*ClientCallback)(CP_EVENTTYPE eEvent, CPuint iParam)); - -} CP_PIPETYPE; - -#endif - diff --git a/phonelibs/android_frameworks_native/include/media/openmax/OMX_Core.h b/phonelibs/android_frameworks_native/include/media/openmax/OMX_Core.h deleted file mode 100644 index f746a69d..00000000 --- a/phonelibs/android_frameworks_native/include/media/openmax/OMX_Core.h +++ /dev/null @@ -1,1464 +0,0 @@ -/* ------------------------------------------------------------------ - * Copyright (C) 1998-2009 PacketVideo - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either - * express or implied. - * See the License for the specific language governing permissions - * and limitations under the License. - * ------------------------------------------------------------------- - */ -/* - * Copyright (c) 2008 The Khronos Group Inc. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation the rights to use, copy, modify, merge, publish, - * distribute, sublicense, and/or sell copies of the Software, and to - * permit persons to whom the Software is furnished to do so, subject - * to the following conditions: - * The above copyright notice and this permission notice shall be included - * in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. - * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY - * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, - * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE - * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - */ - -/** OMX_Core.h - OpenMax IL version 1.1.2 - * The OMX_Core header file contains the definitions used by both the - * application and the component to access common items. - */ - -#ifndef OMX_Core_h -#define OMX_Core_h - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - - -/* Each OMX header shall include all required header files to allow the - * header to compile without errors. The includes below are required - * for this header file to compile successfully - */ - -#include - - -/** The OMX_COMMANDTYPE enumeration is used to specify the action in the - * OMX_SendCommand macro. - * @ingroup core - */ -typedef enum OMX_COMMANDTYPE -{ - OMX_CommandStateSet, /**< Change the component state */ - OMX_CommandFlush, /**< Flush the data queue(s) of a component */ - OMX_CommandPortDisable, /**< Disable a port on a component. */ - OMX_CommandPortEnable, /**< Enable a port on a component. */ - OMX_CommandMarkBuffer, /**< Mark a component/buffer for observation */ - OMX_CommandKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_CommandVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_CommandMax = 0X7FFFFFFF -} OMX_COMMANDTYPE; - - - -/** The OMX_STATETYPE enumeration is used to indicate or change the component - * state. This enumeration reflects the current state of the component when - * used with the OMX_GetState macro or becomes the parameter in a state change - * command when used with the OMX_SendCommand macro. - * - * The component will be in the Loaded state after the component is initially - * loaded into memory. In the Loaded state, the component is not allowed to - * allocate or hold resources other than to build it's internal parameter - * and configuration tables. The application will send one or more - * SetParameters/GetParameters and SetConfig/GetConfig commands to the - * component and the component will record each of these parameter and - * configuration changes for use later. When the application sends the - * Idle command, the component will acquire the resources needed for the - * specified configuration and will transition to the idle state if the - * allocation is successful. If the component cannot successfully - * transition to the idle state for any reason, the state of the component - * shall be fully rolled back to the Loaded state (e.g. all allocated - * resources shall be released). When the component receives the command - * to go to the Executing state, it shall begin processing buffers by - * sending all input buffers it holds to the application. While - * the component is in the Idle state, the application may also send the - * Pause command. If the component receives the pause command while in the - * Idle state, the component shall send all input buffers it holds to the - * application, but shall not begin processing buffers. This will allow the - * application to prefill buffers. - * - * @ingroup comp - */ - -typedef enum OMX_STATETYPE -{ - OMX_StateInvalid, /**< component has detected that it's internal data - structures are corrupted to the point that - it cannot determine it's state properly */ - OMX_StateLoaded, /**< component has been loaded but has not completed - initialization. The OMX_SetParameter macro - and the OMX_GetParameter macro are the only - valid macros allowed to be sent to the - component in this state. */ - OMX_StateIdle, /**< component initialization has been completed - successfully and the component is ready to - to start. */ - OMX_StateExecuting, /**< component has accepted the start command and - is processing data (if data is available) */ - OMX_StatePause, /**< component has received pause command */ - OMX_StateWaitForResources, /**< component is waiting for resources, either after - preemption or before it gets the resources requested. - See specification for complete details. */ - OMX_StateKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_StateVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_StateMax = 0X7FFFFFFF -} OMX_STATETYPE; - -/** The OMX_ERRORTYPE enumeration defines the standard OMX Errors. These - * errors should cover most of the common failure cases. However, - * vendors are free to add additional error messages of their own as - * long as they follow these rules: - * 1. Vendor error messages shall be in the range of 0x90000000 to - * 0x9000FFFF. - * 2. Vendor error messages shall be defined in a header file provided - * with the component. No error messages are allowed that are - * not defined. - */ -typedef enum OMX_ERRORTYPE -{ - OMX_ErrorNone = 0, - - /** There were insufficient resources to perform the requested operation */ - OMX_ErrorInsufficientResources = (OMX_S32) 0x80001000, - - /** There was an error, but the cause of the error could not be determined */ - OMX_ErrorUndefined = (OMX_S32) 0x80001001, - - /** The component name string was not valid */ - OMX_ErrorInvalidComponentName = (OMX_S32) 0x80001002, - - /** No component with the specified name string was found */ - OMX_ErrorComponentNotFound = (OMX_S32) 0x80001003, - - /** The component specified did not have a "OMX_ComponentInit" or - "OMX_ComponentDeInit entry point */ - OMX_ErrorInvalidComponent = (OMX_S32) 0x80001004, - - /** One or more parameters were not valid */ - OMX_ErrorBadParameter = (OMX_S32) 0x80001005, - - /** The requested function is not implemented */ - OMX_ErrorNotImplemented = (OMX_S32) 0x80001006, - - /** The buffer was emptied before the next buffer was ready */ - OMX_ErrorUnderflow = (OMX_S32) 0x80001007, - - /** The buffer was not available when it was needed */ - OMX_ErrorOverflow = (OMX_S32) 0x80001008, - - /** The hardware failed to respond as expected */ - OMX_ErrorHardware = (OMX_S32) 0x80001009, - - /** The component is in the state OMX_StateInvalid */ - OMX_ErrorInvalidState = (OMX_S32) 0x8000100A, - - /** Stream is found to be corrupt */ - OMX_ErrorStreamCorrupt = (OMX_S32) 0x8000100B, - - /** Ports being connected are not compatible */ - OMX_ErrorPortsNotCompatible = (OMX_S32) 0x8000100C, - - /** Resources allocated to an idle component have been - lost resulting in the component returning to the loaded state */ - OMX_ErrorResourcesLost = (OMX_S32) 0x8000100D, - - /** No more indicies can be enumerated */ - OMX_ErrorNoMore = (OMX_S32) 0x8000100E, - - /** The component detected a version mismatch */ - OMX_ErrorVersionMismatch = (OMX_S32) 0x8000100F, - - /** The component is not ready to return data at this time */ - OMX_ErrorNotReady = (OMX_S32) 0x80001010, - - /** There was a timeout that occurred */ - OMX_ErrorTimeout = (OMX_S32) 0x80001011, - - /** This error occurs when trying to transition into the state you are already in */ - OMX_ErrorSameState = (OMX_S32) 0x80001012, - - /** Resources allocated to an executing or paused component have been - preempted, causing the component to return to the idle state */ - OMX_ErrorResourcesPreempted = (OMX_S32) 0x80001013, - - /** A non-supplier port sends this error to the IL client (via the EventHandler callback) - during the allocation of buffers (on a transition from the LOADED to the IDLE state or - on a port restart) when it deems that it has waited an unusually long time for the supplier - to send it an allocated buffer via a UseBuffer call. */ - OMX_ErrorPortUnresponsiveDuringAllocation = (OMX_S32) 0x80001014, - - /** A non-supplier port sends this error to the IL client (via the EventHandler callback) - during the deallocation of buffers (on a transition from the IDLE to LOADED state or - on a port stop) when it deems that it has waited an unusually long time for the supplier - to request the deallocation of a buffer header via a FreeBuffer call. */ - OMX_ErrorPortUnresponsiveDuringDeallocation = (OMX_S32) 0x80001015, - - /** A supplier port sends this error to the IL client (via the EventHandler callback) - during the stopping of a port (either on a transition from the IDLE to LOADED - state or a port stop) when it deems that it has waited an unusually long time for - the non-supplier to return a buffer via an EmptyThisBuffer or FillThisBuffer call. */ - OMX_ErrorPortUnresponsiveDuringStop = (OMX_S32) 0x80001016, - - /** Attempting a state transtion that is not allowed */ - OMX_ErrorIncorrectStateTransition = (OMX_S32) 0x80001017, - - /* Attempting a command that is not allowed during the present state. */ - OMX_ErrorIncorrectStateOperation = (OMX_S32) 0x80001018, - - /** The values encapsulated in the parameter or config structure are not supported. */ - OMX_ErrorUnsupportedSetting = (OMX_S32) 0x80001019, - - /** The parameter or config indicated by the given index is not supported. */ - OMX_ErrorUnsupportedIndex = (OMX_S32) 0x8000101A, - - /** The port index supplied is incorrect. */ - OMX_ErrorBadPortIndex = (OMX_S32) 0x8000101B, - - /** The port has lost one or more of its buffers and it thus unpopulated. */ - OMX_ErrorPortUnpopulated = (OMX_S32) 0x8000101C, - - /** Component suspended due to temporary loss of resources */ - OMX_ErrorComponentSuspended = (OMX_S32) 0x8000101D, - - /** Component suspended due to an inability to acquire dynamic resources */ - OMX_ErrorDynamicResourcesUnavailable = (OMX_S32) 0x8000101E, - - /** When the macroblock error reporting is enabled the component returns new error - for every frame that has errors */ - OMX_ErrorMbErrorsInFrame = (OMX_S32) 0x8000101F, - - /** A component reports this error when it cannot parse or determine the format of an input stream. */ - OMX_ErrorFormatNotDetected = (OMX_S32) 0x80001020, - - /** The content open operation failed. */ - OMX_ErrorContentPipeOpenFailed = (OMX_S32) 0x80001021, - - /** The content creation operation failed. */ - OMX_ErrorContentPipeCreationFailed = (OMX_S32) 0x80001022, - - /** Separate table information is being used */ - OMX_ErrorSeperateTablesUsed = (OMX_S32) 0x80001023, - - /** Tunneling is unsupported by the component*/ - OMX_ErrorTunnelingUnsupported = (OMX_S32) 0x80001024, - - OMX_ErrorKhronosExtensions = (OMX_S32)0x8F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_ErrorVendorStartUnused = (OMX_S32)0x90000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_ErrorMax = 0x7FFFFFFF -} OMX_ERRORTYPE; - -/** @ingroup core */ -typedef OMX_ERRORTYPE (* OMX_COMPONENTINITTYPE)(OMX_IN OMX_HANDLETYPE hComponent); - -/** @ingroup core */ -typedef struct OMX_COMPONENTREGISTERTYPE -{ - const char * pName; /* Component name, 128 byte limit (including '\0') applies */ - OMX_COMPONENTINITTYPE pInitialize; /* Component instance initialization function */ -} OMX_COMPONENTREGISTERTYPE; - -/** @ingroup core */ -extern OMX_COMPONENTREGISTERTYPE OMX_ComponentRegistered[]; - -/** @ingroup rpm */ -typedef struct OMX_PRIORITYMGMTTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nGroupPriority; /**< Priority of the component group */ - OMX_U32 nGroupID; /**< ID of the component group */ -} OMX_PRIORITYMGMTTYPE; - -/* Component name and Role names are limited to 128 characters including the terminating '\0'. */ -#define OMX_MAX_STRINGNAME_SIZE 128 - -/** @ingroup comp */ -typedef struct OMX_PARAM_COMPONENTROLETYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U8 cRole[OMX_MAX_STRINGNAME_SIZE]; /**< name of standard component which defines component role */ -} OMX_PARAM_COMPONENTROLETYPE; - -/** End of Stream Buffer Flag: - * - * A component sets EOS when it has no more data to emit on a particular - * output port. Thus an output port shall set EOS on the last buffer it - * emits. A component's determination of when an output port should - * cease sending data is implemenation specific. - * @ingroup buf - */ - -#define OMX_BUFFERFLAG_EOS 0x00000001 - -/** Start Time Buffer Flag: - * - * The source of a stream (e.g. a demux component) sets the STARTTIME - * flag on the buffer that contains the starting timestamp for the - * stream. The starting timestamp corresponds to the first data that - * should be displayed at startup or after a seek. - * The first timestamp of the stream is not necessarily the start time. - * For instance, in the case of a seek to a particular video frame, - * the target frame may be an interframe. Thus the first buffer of - * the stream will be the intra-frame preceding the target frame and - * the starttime will occur with the target frame (with any other - * required frames required to reconstruct the target intervening). - * - * The STARTTIME flag is directly associated with the buffer's - * timestamp ' thus its association to buffer data and its - * propagation is identical to the timestamp's. - * - * When a Sync Component client receives a buffer with the - * STARTTIME flag it shall perform a SetConfig on its sync port - * using OMX_ConfigTimeClientStartTime and passing the buffer's - * timestamp. - * - * @ingroup buf - */ - -#define OMX_BUFFERFLAG_STARTTIME 0x00000002 - - - -/** Decode Only Buffer Flag: - * - * The source of a stream (e.g. a demux component) sets the DECODEONLY - * flag on any buffer that should shall be decoded but should not be - * displayed. This flag is used, for instance, when a source seeks to - * a target interframe that requires the decode of frames preceding the - * target to facilitate the target's reconstruction. In this case the - * source would emit the frames preceding the target downstream - * but mark them as decode only. - * - * The DECODEONLY is associated with buffer data and propagated in a - * manner identical to the buffer timestamp. - * - * A component that renders data should ignore all buffers with - * the DECODEONLY flag set. - * - * @ingroup buf - */ - -#define OMX_BUFFERFLAG_DECODEONLY 0x00000004 - - -/* Data Corrupt Flag: This flag is set when the IL client believes the data in the associated buffer is corrupt - * @ingroup buf - */ - -#define OMX_BUFFERFLAG_DATACORRUPT 0x00000008 - -/* End of Frame: The buffer contains exactly one end of frame and no data - * occurs after the end of frame. This flag is an optional hint. The absence - * of this flag does not imply the absence of an end of frame within the buffer. - * @ingroup buf -*/ -#define OMX_BUFFERFLAG_ENDOFFRAME 0x00000010 - -/* Sync Frame Flag: This flag is set when the buffer content contains a coded sync frame ' - * a frame that has no dependency on any other frame information - * @ingroup buf - */ -#define OMX_BUFFERFLAG_SYNCFRAME 0x00000020 - -/* Extra data present flag: there is extra data appended to the data stream - * residing in the buffer - * @ingroup buf - */ -#define OMX_BUFFERFLAG_EXTRADATA 0x00000040 - -/** Codec Config Buffer Flag: -* OMX_BUFFERFLAG_CODECCONFIG is an optional flag that is set by an -* output port when all bytes in the buffer form part or all of a set of -* codec specific configuration data. Examples include SPS/PPS nal units -* for OMX_VIDEO_CodingAVC or AudioSpecificConfig data for -* OMX_AUDIO_CodingAAC. Any component that for a given stream sets -* OMX_BUFFERFLAG_CODECCONFIG shall not mix codec configuration bytes -* with frame data in the same buffer, and shall send all buffers -* containing codec configuration bytes before any buffers containing -* frame data that those configurations bytes describe. -* If the stream format for a particular codec has a frame specific -* header at the start of each frame, for example OMX_AUDIO_CodingMP3 or -* OMX_AUDIO_CodingAAC in ADTS mode, then these shall be presented as -* normal without setting OMX_BUFFERFLAG_CODECCONFIG. - * @ingroup buf - */ -#define OMX_BUFFERFLAG_CODECCONFIG 0x00000080 - - - -/** @ingroup buf */ -typedef struct OMX_BUFFERHEADERTYPE -{ - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U8* pBuffer; /**< Pointer to actual block of memory - that is acting as the buffer */ - OMX_U32 nAllocLen; /**< size of the buffer allocated, in bytes */ - OMX_U32 nFilledLen; /**< number of bytes currently in the - buffer */ - OMX_U32 nOffset; /**< start offset of valid data in bytes from - the start of the buffer */ - OMX_PTR pAppPrivate; /**< pointer to any data the application - wants to associate with this buffer */ - OMX_PTR pPlatformPrivate; /**< pointer to any data the platform - wants to associate with this buffer */ - OMX_PTR pInputPortPrivate; /**< pointer to any data the input port - wants to associate with this buffer */ - OMX_PTR pOutputPortPrivate; /**< pointer to any data the output port - wants to associate with this buffer */ - OMX_HANDLETYPE hMarkTargetComponent; /**< The component that will generate a - mark event upon processing this buffer. */ - OMX_PTR pMarkData; /**< Application specific data associated with - the mark sent on a mark event to disambiguate - this mark from others. */ - OMX_U32 nTickCount; /**< Optional entry that the component and - application can update with a tick count - when they access the component. This - value should be in microseconds. Since - this is a value relative to an arbitrary - starting point, this value cannot be used - to determine absolute time. This is an - optional entry and not all components - will update it.*/ - OMX_TICKS nTimeStamp; /**< Timestamp corresponding to the sample - starting at the first logical sample - boundary in the buffer. Timestamps of - successive samples within the buffer may - be inferred by adding the duration of the - of the preceding buffer to the timestamp - of the preceding buffer.*/ - OMX_U32 nFlags; /**< buffer specific flags */ - OMX_U32 nOutputPortIndex; /**< The index of the output port (if any) using - this buffer */ - OMX_U32 nInputPortIndex; /**< The index of the input port (if any) using - this buffer */ -} OMX_BUFFERHEADERTYPE; - -/** The OMX_EXTRADATATYPE enumeration is used to define the - * possible extra data payload types. - * NB: this enum is binary backwards compatible with the previous - * OMX_EXTRADATA_QUANT define. This should be replaced with - * OMX_ExtraDataQuantization. - */ -typedef enum OMX_EXTRADATATYPE -{ - OMX_ExtraDataNone = 0, /**< Indicates that no more extra data sections follow */ - OMX_ExtraDataQuantization, /**< The data payload contains quantization data */ - OMX_ExtraDataKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_ExtraDataVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_ExtraDataMax = 0x7FFFFFFF -} OMX_EXTRADATATYPE; - - -typedef struct OMX_OTHER_EXTRADATATYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_EXTRADATATYPE eType; /* Extra Data type */ - OMX_U32 nDataSize; /* Size of the supporting data to follow */ - OMX_U8 data[1]; /* Supporting data hint */ -} OMX_OTHER_EXTRADATATYPE; - -/** @ingroup comp */ -typedef struct OMX_PORT_PARAM_TYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPorts; /**< The number of ports for this component */ - OMX_U32 nStartPortNumber; /** first port number for this type of port */ -} OMX_PORT_PARAM_TYPE; - -/** @ingroup comp */ -typedef enum OMX_EVENTTYPE -{ - OMX_EventCmdComplete, /**< component has sucessfully completed a command */ - OMX_EventError, /**< component has detected an error condition */ - OMX_EventMark, /**< component has detected a buffer mark */ - OMX_EventPortSettingsChanged, /**< component is reported a port settings change */ - OMX_EventBufferFlag, /**< component has detected an EOS */ - OMX_EventResourcesAcquired, /**< component has been granted resources and is - automatically starting the state change from - OMX_StateWaitForResources to OMX_StateIdle. */ - OMX_EventComponentResumed, /**< Component resumed due to reacquisition of resources */ - OMX_EventDynamicResourcesAvailable, /**< Component has acquired previously unavailable dynamic resources */ - OMX_EventPortFormatDetected, /**< Component has detected a supported format. */ - OMX_EventKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_EventVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - - /** Event when tunneled decoder has rendered an output or reached EOS - * nData1 must contain the number of timestamps returned - * pEventData must point to an array of the OMX_VIDEO_RENDEREVENTTYPE structs containing the - * render-timestamps of each frame. Component may batch rendered timestamps using this event, - * but must signal the event no more than 40ms after the first frame in the batch. The frames - * must be ordered by system timestamp inside and across batches. - * - * If component is doing frame-rate conversion, it must signal the render time of each - * converted frame, and must interpolate media timestamps for in-between frames. - * - * When the component reached EOS, it must signal an EOS timestamp using the same mechanism. - * This is in addition to the timestamp of the last rendered frame, and should follow that - * frame. - */ - OMX_EventOutputRendered = 0x7F000001, - OMX_EventMax = 0x7FFFFFFF -} OMX_EVENTTYPE; - -typedef struct OMX_CALLBACKTYPE -{ - /** The EventHandler method is used to notify the application when an - event of interest occurs. Events are defined in the OMX_EVENTTYPE - enumeration. Please see that enumeration for details of what will - be returned for each type of event. Callbacks should not return - an error to the component, so if an error occurs, the application - shall handle it internally. This is a blocking call. - - The application should return from this call within 5 msec to avoid - blocking the component for an excessively long period of time. - - @param hComponent - handle of the component to access. This is the component - handle returned by the call to the GetHandle function. - @param pAppData - pointer to an application defined value that was provided in the - pAppData parameter to the OMX_GetHandle method for the component. - This application defined value is provided so that the application - can have a component specific context when receiving the callback. - @param eEvent - Event that the component wants to notify the application about. - @param nData1 - nData will be the OMX_ERRORTYPE for an error event and will be - an OMX_COMMANDTYPE for a command complete event and OMX_INDEXTYPE for a OMX_PortSettingsChanged event. - @param nData2 - nData2 will hold further information related to the event. Can be OMX_STATETYPE for - a OMX_CommandStateSet command or port index for a OMX_PortSettingsChanged event. - Default value is 0 if not used. ) - @param pEventData - Pointer to additional event-specific data (see spec for meaning). - */ - - OMX_ERRORTYPE (*EventHandler)( - OMX_IN OMX_HANDLETYPE hComponent, - OMX_IN OMX_PTR pAppData, - OMX_IN OMX_EVENTTYPE eEvent, - OMX_IN OMX_U32 nData1, - OMX_IN OMX_U32 nData2, - OMX_IN OMX_PTR pEventData); - - /** The EmptyBufferDone method is used to return emptied buffers from an - input port back to the application for reuse. This is a blocking call - so the application should not attempt to refill the buffers during this - call, but should queue them and refill them in another thread. There - is no error return, so the application shall handle any errors generated - internally. - - The application should return from this call within 5 msec. - - @param hComponent - handle of the component to access. This is the component - handle returned by the call to the GetHandle function. - @param pAppData - pointer to an application defined value that was provided in the - pAppData parameter to the OMX_GetHandle method for the component. - This application defined value is provided so that the application - can have a component specific context when receiving the callback. - @param pBuffer - pointer to an OMX_BUFFERHEADERTYPE structure allocated with UseBuffer - or AllocateBuffer indicating the buffer that was emptied. - @ingroup buf - */ - OMX_ERRORTYPE (*EmptyBufferDone)( - OMX_IN OMX_HANDLETYPE hComponent, - OMX_IN OMX_PTR pAppData, - OMX_IN OMX_BUFFERHEADERTYPE* pBuffer); - - /** The FillBufferDone method is used to return filled buffers from an - output port back to the application for emptying and then reuse. - This is a blocking call so the application should not attempt to - empty the buffers during this call, but should queue the buffers - and empty them in another thread. There is no error return, so - the application shall handle any errors generated internally. The - application shall also update the buffer header to indicate the - number of bytes placed into the buffer. - - The application should return from this call within 5 msec. - - @param hComponent - handle of the component to access. This is the component - handle returned by the call to the GetHandle function. - @param pAppData - pointer to an application defined value that was provided in the - pAppData parameter to the OMX_GetHandle method for the component. - This application defined value is provided so that the application - can have a component specific context when receiving the callback. - @param pBuffer - pointer to an OMX_BUFFERHEADERTYPE structure allocated with UseBuffer - or AllocateBuffer indicating the buffer that was filled. - @ingroup buf - */ - OMX_ERRORTYPE (*FillBufferDone)( - OMX_OUT OMX_HANDLETYPE hComponent, - OMX_OUT OMX_PTR pAppData, - OMX_OUT OMX_BUFFERHEADERTYPE* pBuffer); - -} OMX_CALLBACKTYPE; - -/** The OMX_BUFFERSUPPLIERTYPE enumeration is used to dictate port supplier - preference when tunneling between two ports. - @ingroup tun buf -*/ -typedef enum OMX_BUFFERSUPPLIERTYPE -{ - OMX_BufferSupplyUnspecified = 0x0, /**< port supplying the buffers is unspecified, - or don't care */ - OMX_BufferSupplyInput, /**< input port supplies the buffers */ - OMX_BufferSupplyOutput, /**< output port supplies the buffers */ - OMX_BufferSupplyKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_BufferSupplyVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_BufferSupplyMax = 0x7FFFFFFF -} OMX_BUFFERSUPPLIERTYPE; - - -/** buffer supplier parameter - * @ingroup tun - */ -typedef struct OMX_PARAM_BUFFERSUPPLIERTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_BUFFERSUPPLIERTYPE eBufferSupplier; /**< buffer supplier */ -} OMX_PARAM_BUFFERSUPPLIERTYPE; - - -/**< indicates that buffers received by an input port of a tunnel - may not modify the data in the buffers - @ingroup tun - */ -#define OMX_PORTTUNNELFLAG_READONLY 0x00000001 - - -/** The OMX_TUNNELSETUPTYPE structure is used to pass data from an output - port to an input port as part the two ComponentTunnelRequest calls - resulting from a OMX_SetupTunnel call from the IL Client. - @ingroup tun - */ -typedef struct OMX_TUNNELSETUPTYPE -{ - OMX_U32 nTunnelFlags; /**< bit flags for tunneling */ - OMX_BUFFERSUPPLIERTYPE eSupplier; /**< supplier preference */ -} OMX_TUNNELSETUPTYPE; - -/* OMX Component headers is included to enable the core to use - macros for functions into the component for OMX release 1.0. - Developers should not access any structures or data from within - the component header directly */ -/* TO BE REMOVED - #include */ - -/** GetComponentVersion will return information about the component. - This is a blocking call. This macro will go directly from the - application to the component (via a core macro). The - component will return from this call within 5 msec. - @param [in] hComponent - handle of component to execute the command - @param [out] pComponentName - pointer to an empty string of length 128 bytes. The component - will write its name into this string. The name will be - terminated by a single zero byte. The name of a component will - be 127 bytes or less to leave room for the trailing zero byte. - An example of a valid component name is "OMX.ABC.ChannelMixer\0". - @param [out] pComponentVersion - pointer to an OMX Version structure that the component will fill - in. The component will fill in a value that indicates the - component version. NOTE: the component version is NOT the same - as the OMX Specification version (found in all structures). The - component version is defined by the vendor of the component and - its value is entirely up to the component vendor. - @param [out] pSpecVersion - pointer to an OMX Version structure that the component will fill - in. The SpecVersion is the version of the specification that the - component was built against. Please note that this value may or - may not match the structure's version. For example, if the - component was built against the 2.0 specification, but the - application (which creates the structure is built against the - 1.0 specification the versions would be different. - @param [out] pComponentUUID - pointer to the UUID of the component which will be filled in by - the component. The UUID is a unique identifier that is set at - RUN time for the component and is unique to each instantion of - the component. - @return OMX_ERRORTYPE - If the command successfully executes, the return code will be - OMX_ErrorNone. Otherwise the appropriate OMX error will be returned. - @ingroup comp - */ -#define OMX_GetComponentVersion( \ - hComponent, \ - pComponentName, \ - pComponentVersion, \ - pSpecVersion, \ - pComponentUUID) \ - ((OMX_COMPONENTTYPE*)hComponent)->GetComponentVersion( \ - hComponent, \ - pComponentName, \ - pComponentVersion, \ - pSpecVersion, \ - pComponentUUID) /* Macro End */ - - -/** Send a command to the component. This call is a non-blocking call. - The component should check the parameters and then queue the command - to the component thread to be executed. The component thread shall - send the EventHandler() callback at the conclusion of the command. - This macro will go directly from the application to the component (via - a core macro). The component will return from this call within 5 msec. - - When the command is "OMX_CommandStateSet" the component will queue a - state transition to the new state idenfied in nParam. - - When the command is "OMX_CommandFlush", to flush a port's buffer queues, - the command will force the component to return all buffers NOT CURRENTLY - BEING PROCESSED to the application, in the order in which the buffers - were received. - - When the command is "OMX_CommandPortDisable" or - "OMX_CommandPortEnable", the component's port (given by the value of - nParam) will be stopped or restarted. - - When the command "OMX_CommandMarkBuffer" is used to mark a buffer, the - pCmdData will point to a OMX_MARKTYPE structure containing the component - handle of the component to examine the buffer chain for the mark. nParam1 - contains the index of the port on which the buffer mark is applied. - - Specification text for more details. - - @param [in] hComponent - handle of component to execute the command - @param [in] Cmd - Command for the component to execute - @param [in] nParam - Parameter for the command to be executed. When Cmd has the value - OMX_CommandStateSet, value is a member of OMX_STATETYPE. When Cmd has - the value OMX_CommandFlush, value of nParam indicates which port(s) - to flush. -1 is used to flush all ports a single port index will - only flush that port. When Cmd has the value "OMX_CommandPortDisable" - or "OMX_CommandPortEnable", the component's port is given by - the value of nParam. When Cmd has the value "OMX_CommandMarkBuffer" - the components pot is given by the value of nParam. - @param [in] pCmdData - Parameter pointing to the OMX_MARKTYPE structure when Cmd has the value - "OMX_CommandMarkBuffer". - @return OMX_ERRORTYPE - If the command successfully executes, the return code will be - OMX_ErrorNone. Otherwise the appropriate OMX error will be returned. - @ingroup comp - */ -#define OMX_SendCommand( \ - hComponent, \ - Cmd, \ - nParam, \ - pCmdData) \ - ((OMX_COMPONENTTYPE*)hComponent)->SendCommand( \ - hComponent, \ - Cmd, \ - nParam, \ - pCmdData) /* Macro End */ - - -/** The OMX_GetParameter macro will get one of the current parameter - settings from the component. This macro cannot only be invoked when - the component is in the OMX_StateInvalid state. The nParamIndex - parameter is used to indicate which structure is being requested from - the component. The application shall allocate the correct structure - and shall fill in the structure size and version information before - invoking this macro. When the parameter applies to a port, the - caller shall fill in the appropriate nPortIndex value indicating the - port on which the parameter applies. If the component has not had - any settings changed, then the component should return a set of - valid DEFAULT parameters for the component. This is a blocking - call. - - The component should return from this call within 20 msec. - - @param [in] hComponent - Handle of the component to be accessed. This is the component - handle returned by the call to the OMX_GetHandle function. - @param [in] nParamIndex - Index of the structure to be filled. This value is from the - OMX_INDEXTYPE enumeration. - @param [in,out] pComponentParameterStructure - Pointer to application allocated structure to be filled by the - component. - @return OMX_ERRORTYPE - If the command successfully executes, the return code will be - OMX_ErrorNone. Otherwise the appropriate OMX error will be returned. - @ingroup comp - */ -#define OMX_GetParameter( \ - hComponent, \ - nParamIndex, \ - pComponentParameterStructure) \ - ((OMX_COMPONENTTYPE*)hComponent)->GetParameter( \ - hComponent, \ - nParamIndex, \ - pComponentParameterStructure) /* Macro End */ - - -/** The OMX_SetParameter macro will send an initialization parameter - structure to a component. Each structure shall be sent one at a time, - in a separate invocation of the macro. This macro can only be - invoked when the component is in the OMX_StateLoaded state, or the - port is disabled (when the parameter applies to a port). The - nParamIndex parameter is used to indicate which structure is being - passed to the component. The application shall allocate the - correct structure and shall fill in the structure size and version - information (as well as the actual data) before invoking this macro. - The application is free to dispose of this structure after the call - as the component is required to copy any data it shall retain. This - is a blocking call. - - The component should return from this call within 20 msec. - - @param [in] hComponent - Handle of the component to be accessed. This is the component - handle returned by the call to the OMX_GetHandle function. - @param [in] nIndex - Index of the structure to be sent. This value is from the - OMX_INDEXTYPE enumeration. - @param [in] pComponentParameterStructure - pointer to application allocated structure to be used for - initialization by the component. - @return OMX_ERRORTYPE - If the command successfully executes, the return code will be - OMX_ErrorNone. Otherwise the appropriate OMX error will be returned. - @ingroup comp - */ -#define OMX_SetParameter( \ - hComponent, \ - nParamIndex, \ - pComponentParameterStructure) \ - ((OMX_COMPONENTTYPE*)hComponent)->SetParameter( \ - hComponent, \ - nParamIndex, \ - pComponentParameterStructure) /* Macro End */ - - -/** The OMX_GetConfig macro will get one of the configuration structures - from a component. This macro can be invoked anytime after the - component has been loaded. The nParamIndex call parameter is used to - indicate which structure is being requested from the component. The - application shall allocate the correct structure and shall fill in the - structure size and version information before invoking this macro. - If the component has not had this configuration parameter sent before, - then the component should return a set of valid DEFAULT values for the - component. This is a blocking call. - - The component should return from this call within 5 msec. - - @param [in] hComponent - Handle of the component to be accessed. This is the component - handle returned by the call to the OMX_GetHandle function. - @param [in] nIndex - Index of the structure to be filled. This value is from the - OMX_INDEXTYPE enumeration. - @param [in,out] pComponentConfigStructure - pointer to application allocated structure to be filled by the - component. - @return OMX_ERRORTYPE - If the command successfully executes, the return code will be - OMX_ErrorNone. Otherwise the appropriate OMX error will be returned. - @ingroup comp -*/ -#define OMX_GetConfig( \ - hComponent, \ - nConfigIndex, \ - pComponentConfigStructure) \ - ((OMX_COMPONENTTYPE*)hComponent)->GetConfig( \ - hComponent, \ - nConfigIndex, \ - pComponentConfigStructure) /* Macro End */ - - -/** The OMX_SetConfig macro will send one of the configuration - structures to a component. Each structure shall be sent one at a time, - each in a separate invocation of the macro. This macro can be invoked - anytime after the component has been loaded. The application shall - allocate the correct structure and shall fill in the structure size - and version information (as well as the actual data) before invoking - this macro. The application is free to dispose of this structure after - the call as the component is required to copy any data it shall retain. - This is a blocking call. - - The component should return from this call within 5 msec. - - @param [in] hComponent - Handle of the component to be accessed. This is the component - handle returned by the call to the OMX_GetHandle function. - @param [in] nConfigIndex - Index of the structure to be sent. This value is from the - OMX_INDEXTYPE enumeration above. - @param [in] pComponentConfigStructure - pointer to application allocated structure to be used for - initialization by the component. - @return OMX_ERRORTYPE - If the command successfully executes, the return code will be - OMX_ErrorNone. Otherwise the appropriate OMX error will be returned. - @ingroup comp - */ -#define OMX_SetConfig( \ - hComponent, \ - nConfigIndex, \ - pComponentConfigStructure) \ - ((OMX_COMPONENTTYPE*)hComponent)->SetConfig( \ - hComponent, \ - nConfigIndex, \ - pComponentConfigStructure) /* Macro End */ - - -/** The OMX_GetExtensionIndex macro will invoke a component to translate - a vendor specific configuration or parameter string into an OMX - structure index. There is no requirement for the vendor to support - this command for the indexes already found in the OMX_INDEXTYPE - enumeration (this is done to save space in small components). The - component shall support all vendor supplied extension indexes not found - in the master OMX_INDEXTYPE enumeration. This is a blocking call. - - The component should return from this call within 5 msec. - - @param [in] hComponent - Handle of the component to be accessed. This is the component - handle returned by the call to the GetHandle function. - @param [in] cParameterName - OMX_STRING that shall be less than 128 characters long including - the trailing null byte. This is the string that will get - translated by the component into a configuration index. - @param [out] pIndexType - a pointer to a OMX_INDEXTYPE to receive the index value. - @return OMX_ERRORTYPE - If the command successfully executes, the return code will be - OMX_ErrorNone. Otherwise the appropriate OMX error will be returned. - @ingroup comp - */ -#define OMX_GetExtensionIndex( \ - hComponent, \ - cParameterName, \ - pIndexType) \ - ((OMX_COMPONENTTYPE*)hComponent)->GetExtensionIndex( \ - hComponent, \ - cParameterName, \ - pIndexType) /* Macro End */ - - -/** The OMX_GetState macro will invoke the component to get the current - state of the component and place the state value into the location - pointed to by pState. - - The component should return from this call within 5 msec. - - @param [in] hComponent - Handle of the component to be accessed. This is the component - handle returned by the call to the OMX_GetHandle function. - @param [out] pState - pointer to the location to receive the state. The value returned - is one of the OMX_STATETYPE members - @return OMX_ERRORTYPE - If the command successfully executes, the return code will be - OMX_ErrorNone. Otherwise the appropriate OMX error will be returned. - @ingroup comp - */ -#define OMX_GetState( \ - hComponent, \ - pState) \ - ((OMX_COMPONENTTYPE*)hComponent)->GetState( \ - hComponent, \ - pState) /* Macro End */ - - -/** The OMX_UseBuffer macro will request that the component use - a buffer (and allocate its own buffer header) already allocated - by another component, or by the IL Client. This is a blocking - call. - - The component should return from this call within 20 msec. - - @param [in] hComponent - Handle of the component to be accessed. This is the component - handle returned by the call to the OMX_GetHandle function. - @param [out] ppBuffer - pointer to an OMX_BUFFERHEADERTYPE structure used to receive the - pointer to the buffer header - @return OMX_ERRORTYPE - If the command successfully executes, the return code will be - OMX_ErrorNone. Otherwise the appropriate OMX error will be returned. - @ingroup comp buf - */ - -#define OMX_UseBuffer( \ - hComponent, \ - ppBufferHdr, \ - nPortIndex, \ - pAppPrivate, \ - nSizeBytes, \ - pBuffer) \ - ((OMX_COMPONENTTYPE*)hComponent)->UseBuffer( \ - hComponent, \ - ppBufferHdr, \ - nPortIndex, \ - pAppPrivate, \ - nSizeBytes, \ - pBuffer) - - -/** The OMX_AllocateBuffer macro will request that the component allocate - a new buffer and buffer header. The component will allocate the - buffer and the buffer header and return a pointer to the buffer - header. This is a blocking call. - - The component should return from this call within 5 msec. - - @param [in] hComponent - Handle of the component to be accessed. This is the component - handle returned by the call to the OMX_GetHandle function. - @param [out] ppBuffer - pointer to an OMX_BUFFERHEADERTYPE structure used to receive - the pointer to the buffer header - @param [in] nPortIndex - nPortIndex is used to select the port on the component the buffer will - be used with. The port can be found by using the nPortIndex - value as an index into the Port Definition array of the component. - @param [in] pAppPrivate - pAppPrivate is used to initialize the pAppPrivate member of the - buffer header structure. - @param [in] nSizeBytes - size of the buffer to allocate. Used when bAllocateNew is true. - @return OMX_ERRORTYPE - If the command successfully executes, the return code will be - OMX_ErrorNone. Otherwise the appropriate OMX error will be returned. - @ingroup comp buf - */ -#define OMX_AllocateBuffer( \ - hComponent, \ - ppBuffer, \ - nPortIndex, \ - pAppPrivate, \ - nSizeBytes) \ - ((OMX_COMPONENTTYPE*)hComponent)->AllocateBuffer( \ - hComponent, \ - ppBuffer, \ - nPortIndex, \ - pAppPrivate, \ - nSizeBytes) /* Macro End */ - - -/** The OMX_FreeBuffer macro will release a buffer header from the component - which was allocated using either OMX_AllocateBuffer or OMX_UseBuffer. If - the component allocated the buffer (see the OMX_UseBuffer macro) then - the component shall free the buffer and buffer header. This is a - blocking call. - - The component should return from this call within 20 msec. - - @param [in] hComponent - Handle of the component to be accessed. This is the component - handle returned by the call to the OMX_GetHandle function. - @param [in] nPortIndex - nPortIndex is used to select the port on the component the buffer will - be used with. - @param [in] pBuffer - pointer to an OMX_BUFFERHEADERTYPE structure allocated with UseBuffer - or AllocateBuffer. - @return OMX_ERRORTYPE - If the command successfully executes, the return code will be - OMX_ErrorNone. Otherwise the appropriate OMX error will be returned. - @ingroup comp buf - */ -#define OMX_FreeBuffer( \ - hComponent, \ - nPortIndex, \ - pBuffer) \ - ((OMX_COMPONENTTYPE*)hComponent)->FreeBuffer( \ - hComponent, \ - nPortIndex, \ - pBuffer) /* Macro End */ - - -/** The OMX_EmptyThisBuffer macro will send a buffer full of data to an - input port of a component. The buffer will be emptied by the component - and returned to the application via the EmptyBufferDone call back. - This is a non-blocking call in that the component will record the buffer - and return immediately and then empty the buffer, later, at the proper - time. As expected, this macro may be invoked only while the component - is in the OMX_StateExecuting. If nPortIndex does not specify an input - port, the component shall return an error. - - The component should return from this call within 5 msec. - - @param [in] hComponent - Handle of the component to be accessed. This is the component - handle returned by the call to the OMX_GetHandle function. - @param [in] pBuffer - pointer to an OMX_BUFFERHEADERTYPE structure allocated with UseBuffer - or AllocateBuffer. - @return OMX_ERRORTYPE - If the command successfully executes, the return code will be - OMX_ErrorNone. Otherwise the appropriate OMX error will be returned. - @ingroup comp buf - */ -#define OMX_EmptyThisBuffer( \ - hComponent, \ - pBuffer) \ - ((OMX_COMPONENTTYPE*)hComponent)->EmptyThisBuffer( \ - hComponent, \ - pBuffer) /* Macro End */ - - -/** The OMX_FillThisBuffer macro will send an empty buffer to an - output port of a component. The buffer will be filled by the component - and returned to the application via the FillBufferDone call back. - This is a non-blocking call in that the component will record the buffer - and return immediately and then fill the buffer, later, at the proper - time. As expected, this macro may be invoked only while the component - is in the OMX_ExecutingState. If nPortIndex does not specify an output - port, the component shall return an error. - - The component should return from this call within 5 msec. - - @param [in] hComponent - Handle of the component to be accessed. This is the component - handle returned by the call to the OMX_GetHandle function. - @param [in] pBuffer - pointer to an OMX_BUFFERHEADERTYPE structure allocated with UseBuffer - or AllocateBuffer. - @return OMX_ERRORTYPE - If the command successfully executes, the return code will be - OMX_ErrorNone. Otherwise the appropriate OMX error will be returned. - @ingroup comp buf - */ -#define OMX_FillThisBuffer( \ - hComponent, \ - pBuffer) \ - ((OMX_COMPONENTTYPE*)hComponent)->FillThisBuffer( \ - hComponent, \ - pBuffer) /* Macro End */ - - - -/** The OMX_UseEGLImage macro will request that the component use - a EGLImage provided by EGL (and allocate its own buffer header) - This is a blocking call. - - The component should return from this call within 20 msec. - - @param [in] hComponent - Handle of the component to be accessed. This is the component - handle returned by the call to the OMX_GetHandle function. - @param [out] ppBuffer - pointer to an OMX_BUFFERHEADERTYPE structure used to receive the - pointer to the buffer header. Note that the memory location used - for this buffer is NOT visible to the IL Client. - @param [in] nPortIndex - nPortIndex is used to select the port on the component the buffer will - be used with. The port can be found by using the nPortIndex - value as an index into the Port Definition array of the component. - @param [in] pAppPrivate - pAppPrivate is used to initialize the pAppPrivate member of the - buffer header structure. - @param [in] eglImage - eglImage contains the handle of the EGLImage to use as a buffer on the - specified port. The component is expected to validate properties of - the EGLImage against the configuration of the port to ensure the component - can use the EGLImage as a buffer. - @return OMX_ERRORTYPE - If the command successfully executes, the return code will be - OMX_ErrorNone. Otherwise the appropriate OMX error will be returned. - @ingroup comp buf - */ -#define OMX_UseEGLImage( \ - hComponent, \ - ppBufferHdr, \ - nPortIndex, \ - pAppPrivate, \ - eglImage) \ - ((OMX_COMPONENTTYPE*)hComponent)->UseEGLImage( \ - hComponent, \ - ppBufferHdr, \ - nPortIndex, \ - pAppPrivate, \ - eglImage) - -/** The OMX_Init method is used to initialize the OMX core. It shall be the - first call made into OMX and it should only be executed one time without - an interviening OMX_Deinit call. - - The core should return from this call within 20 msec. - - @return OMX_ERRORTYPE - If the command successfully executes, the return code will be - OMX_ErrorNone. Otherwise the appropriate OMX error will be returned. - @ingroup core - */ -OMX_API OMX_ERRORTYPE OMX_APIENTRY OMX_Init(void); - - -/** The OMX_Deinit method is used to deinitialize the OMX core. It shall be - the last call made into OMX. In the event that the core determines that - thare are components loaded when this call is made, the core may return - with an error rather than try to unload the components. - - The core should return from this call within 20 msec. - - @return OMX_ERRORTYPE - If the command successfully executes, the return code will be - OMX_ErrorNone. Otherwise the appropriate OMX error will be returned. - @ingroup core - */ -OMX_API OMX_ERRORTYPE OMX_APIENTRY OMX_Deinit(void); - - -/** The OMX_ComponentNameEnum method will enumerate through all the names of - recognised valid components in the system. This function is provided - as a means to detect all the components in the system run-time. There is - no strict ordering to the enumeration order of component names, although - each name will only be enumerated once. If the OMX core supports run-time - installation of new components, it is only requried to detect newly - installed components when the first call to enumerate component names - is made (i.e. when nIndex is 0x0). - - The core should return from this call in 20 msec. - - @param [out] cComponentName - pointer to a null terminated string with the component name. The - names of the components are strings less than 127 bytes in length - plus the trailing null for a maximum size of 128 bytes. An example - of a valid component name is "OMX.TI.AUDIO.DSP.MIXER\0". Names are - assigned by the vendor, but shall start with "OMX." and then have - the Vendor designation next. - @param [in] nNameLength - number of characters in the cComponentName string. With all - component name strings restricted to less than 128 characters - (including the trailing null) it is recomended that the caller - provide a input string for the cComponentName of 128 characters. - @param [in] nIndex - number containing the enumeration index for the component. - Multiple calls to OMX_ComponentNameEnum with increasing values - of nIndex will enumerate through the component names in the - system until OMX_ErrorNoMore is returned. The value of nIndex - is 0 to (N-1), where N is the number of valid installed components - in the system. - @return OMX_ERRORTYPE - If the command successfully executes, the return code will be - OMX_ErrorNone. When the value of nIndex exceeds the number of - components in the system minus 1, OMX_ErrorNoMore will be - returned. Otherwise the appropriate OMX error will be returned. - @ingroup core - */ -OMX_API OMX_ERRORTYPE OMX_APIENTRY OMX_ComponentNameEnum( - OMX_OUT OMX_STRING cComponentName, - OMX_IN OMX_U32 nNameLength, - OMX_IN OMX_U32 nIndex); - - -/** The OMX_GetHandle method will locate the component specified by the - component name given, load that component into memory and then invoke - the component's methods to create an instance of the component. - - The core should return from this call within 20 msec. - - @param [out] pHandle - pointer to an OMX_HANDLETYPE pointer to be filled in by this method. - @param [in] cComponentName - pointer to a null terminated string with the component name. The - names of the components are strings less than 127 bytes in length - plus the trailing null for a maximum size of 128 bytes. An example - of a valid component name is "OMX.TI.AUDIO.DSP.MIXER\0". Names are - assigned by the vendor, but shall start with "OMX." and then have - the Vendor designation next. - @param [in] pAppData - pointer to an application defined value that will be returned - during callbacks so that the application can identify the source - of the callback. - @param [in] pCallBacks - pointer to a OMX_CALLBACKTYPE structure that will be passed to the - component to initialize it with. - @return OMX_ERRORTYPE - If the command successfully executes, the return code will be - OMX_ErrorNone. Otherwise the appropriate OMX error will be returned. - @ingroup core - */ -OMX_API OMX_ERRORTYPE OMX_APIENTRY OMX_GetHandle( - OMX_OUT OMX_HANDLETYPE* pHandle, - OMX_IN OMX_STRING cComponentName, - OMX_IN OMX_PTR pAppData, - OMX_IN OMX_CALLBACKTYPE* pCallBacks); - - -/** The OMX_FreeHandle method will free a handle allocated by the OMX_GetHandle - method. If the component reference count goes to zero, the component will - be unloaded from memory. - - The core should return from this call within 20 msec when the component is - in the OMX_StateLoaded state. - - @param [in] hComponent - Handle of the component to be accessed. This is the component - handle returned by the call to the GetHandle function. - @return OMX_ERRORTYPE - If the command successfully executes, the return code will be - OMX_ErrorNone. Otherwise the appropriate OMX error will be returned. - @ingroup core - */ -OMX_API OMX_ERRORTYPE OMX_APIENTRY OMX_FreeHandle( - OMX_IN OMX_HANDLETYPE hComponent); - - - -/** The OMX_SetupTunnel method will handle the necessary calls to the components - to setup the specified tunnel the two components. NOTE: This is - an actual method (not a #define macro). This method will make calls into - the component ComponentTunnelRequest method to do the actual tunnel - connection. - - The ComponentTunnelRequest method on both components will be called. - This method shall not be called unless the component is in the - OMX_StateLoaded state except when the ports used for the tunnel are - disabled. In this case, the component may be in the OMX_StateExecuting, - OMX_StatePause, or OMX_StateIdle states. - - The core should return from this call within 20 msec. - - @param [in] hOutput - Handle of the component to be accessed. Also this is the handle - of the component whose port, specified in the nPortOutput parameter - will be used the source for the tunnel. This is the component handle - returned by the call to the OMX_GetHandle function. There is a - requirement that hOutput be the source for the data when - tunelling (i.e. nPortOutput is an output port). If 0x0, the component - specified in hInput will have it's port specified in nPortInput - setup for communication with the application / IL client. - @param [in] nPortOutput - nPortOutput is used to select the source port on component to be - used in the tunnel. - @param [in] hInput - This is the component to setup the tunnel with. This is the handle - of the component whose port, specified in the nPortInput parameter - will be used the destination for the tunnel. This is the component handle - returned by the call to the OMX_GetHandle function. There is a - requirement that hInput be the destination for the data when - tunelling (i.e. nPortInut is an input port). If 0x0, the component - specified in hOutput will have it's port specified in nPortPOutput - setup for communication with the application / IL client. - @param [in] nPortInput - nPortInput is used to select the destination port on component to be - used in the tunnel. - @return OMX_ERRORTYPE - If the command successfully executes, the return code will be - OMX_ErrorNone. Otherwise the appropriate OMX error will be returned. - When OMX_ErrorNotImplemented is returned, one or both components is - a non-interop component and does not support tunneling. - - On failure, the ports of both components are setup for communication - with the application / IL Client. - @ingroup core tun - */ -OMX_API OMX_ERRORTYPE OMX_APIENTRY OMX_SetupTunnel( - OMX_IN OMX_HANDLETYPE hOutput, - OMX_IN OMX_U32 nPortOutput, - OMX_IN OMX_HANDLETYPE hInput, - OMX_IN OMX_U32 nPortInput); - -/** @ingroup cp */ -OMX_API OMX_ERRORTYPE OMX_GetContentPipe( - OMX_OUT OMX_HANDLETYPE *hPipe, - OMX_IN OMX_STRING szURI); - -/** The OMX_GetComponentsOfRole method will return the number of components that support the given - role and (if the compNames field is non-NULL) the names of those components. The call will fail if - an insufficiently sized array of names is supplied. To ensure the array is sufficiently sized the - client should: - * first call this function with the compNames field NULL to determine the number of component names - * second call this function with the compNames field pointing to an array of names allocated - according to the number returned by the first call. - - The core should return from this call within 5 msec. - - @param [in] role - This is generic standard component name consisting only of component class - name and the type within that class (e.g. 'audio_decoder.aac'). - @param [inout] pNumComps - This is used both as input and output. - - If compNames is NULL, the input is ignored and the output specifies how many components support - the given role. - - If compNames is not NULL, on input it bounds the size of the input structure and - on output, it specifies the number of components string names listed within the compNames parameter. - @param [inout] compNames - If NULL this field is ignored. If non-NULL this points to an array of 128-byte strings which accepts - a list of the names of all physical components that implement the specified standard component name. - Each name is NULL terminated. numComps indicates the number of names. - @ingroup core - */ -OMX_API OMX_ERRORTYPE OMX_GetComponentsOfRole ( - OMX_IN OMX_STRING role, - OMX_INOUT OMX_U32 *pNumComps, - OMX_INOUT OMX_U8 **compNames); - -/** The OMX_GetRolesOfComponent method will return the number of roles supported by the given - component and (if the roles field is non-NULL) the names of those roles. The call will fail if - an insufficiently sized array of names is supplied. To ensure the array is sufficiently sized the - client should: - * first call this function with the roles field NULL to determine the number of role names - * second call this function with the roles field pointing to an array of names allocated - according to the number returned by the first call. - - The core should return from this call within 5 msec. - - @param [in] compName - This is the name of the component being queried about. - @param [inout] pNumRoles - This is used both as input and output. - - If roles is NULL, the input is ignored and the output specifies how many roles the component supports. - - If compNames is not NULL, on input it bounds the size of the input structure and - on output, it specifies the number of roles string names listed within the roles parameter. - @param [out] roles - If NULL this field is ignored. If non-NULL this points to an array of 128-byte strings - which accepts a list of the names of all standard components roles implemented on the - specified component name. numComps indicates the number of names. - @ingroup core - */ -OMX_API OMX_ERRORTYPE OMX_GetRolesOfComponent ( - OMX_IN OMX_STRING compName, - OMX_INOUT OMX_U32 *pNumRoles, - OMX_OUT OMX_U8 **roles); - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif -/* File EOF */ - diff --git a/phonelibs/android_frameworks_native/include/media/openmax/OMX_IVCommon.h b/phonelibs/android_frameworks_native/include/media/openmax/OMX_IVCommon.h deleted file mode 100644 index f9b6f4b0..00000000 --- a/phonelibs/android_frameworks_native/include/media/openmax/OMX_IVCommon.h +++ /dev/null @@ -1,958 +0,0 @@ -/* ------------------------------------------------------------------ - * Copyright (C) 1998-2009 PacketVideo - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either - * express or implied. - * See the License for the specific language governing permissions - * and limitations under the License. - * ------------------------------------------------------------------- - */ -/** - * Copyright (c) 2008 The Khronos Group Inc. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation the rights to use, copy, modify, merge, publish, - * distribute, sublicense, and/or sell copies of the Software, and to - * permit persons to whom the Software is furnished to do so, subject - * to the following conditions: - * The above copyright notice and this permission notice shall be included - * in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. - * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY - * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, - * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE - * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - */ - -/** - * @file OMX_IVCommon.h - OpenMax IL version 1.1.2 - * The structures needed by Video and Image components to exchange - * parameters and configuration data with the components. - */ -#ifndef OMX_IVCommon_h -#define OMX_IVCommon_h - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/** - * Each OMX header must include all required header files to allow the header - * to compile without errors. The includes below are required for this header - * file to compile successfully - */ - -#include - -/** @defgroup iv OpenMAX IL Imaging and Video Domain - * Common structures for OpenMAX IL Imaging and Video domains - * @{ - */ - - -/** - * Enumeration defining possible uncompressed image/video formats. - * - * ENUMS: - * Unused : Placeholder value when format is N/A - * Monochrome : black and white - * 8bitRGB332 : Red 7:5, Green 4:2, Blue 1:0 - * 12bitRGB444 : Red 11:8, Green 7:4, Blue 3:0 - * 16bitARGB4444 : Alpha 15:12, Red 11:8, Green 7:4, Blue 3:0 - * 16bitARGB1555 : Alpha 15, Red 14:10, Green 9:5, Blue 4:0 - * 16bitRGB565 : Red 15:11, Green 10:5, Blue 4:0 - * 16bitBGR565 : Blue 15:11, Green 10:5, Red 4:0 - * 18bitRGB666 : Red 17:12, Green 11:6, Blue 5:0 - * 18bitARGB1665 : Alpha 17, Red 16:11, Green 10:5, Blue 4:0 - * 19bitARGB1666 : Alpha 18, Red 17:12, Green 11:6, Blue 5:0 - * 24bitRGB888 : Red 24:16, Green 15:8, Blue 7:0 - * 24bitBGR888 : Blue 24:16, Green 15:8, Red 7:0 - * 24bitARGB1887 : Alpha 23, Red 22:15, Green 14:7, Blue 6:0 - * 25bitARGB1888 : Alpha 24, Red 23:16, Green 15:8, Blue 7:0 - * 32bitBGRA8888 : Blue 31:24, Green 23:16, Red 15:8, Alpha 7:0 - * 32bitARGB8888 : Alpha 31:24, Red 23:16, Green 15:8, Blue 7:0 - * YUV411Planar : U,Y are subsampled by a factor of 4 horizontally - * YUV411PackedPlanar : packed per payload in planar slices - * YUV420Planar : Three arrays Y,U,V. - * YUV420PackedPlanar : packed per payload in planar slices - * YUV420SemiPlanar : Two arrays, one is all Y, the other is U and V - * YUV422Planar : Three arrays Y,U,V. - * YUV422PackedPlanar : packed per payload in planar slices - * YUV422SemiPlanar : Two arrays, one is all Y, the other is U and V - * YCbYCr : Organized as 16bit YUYV (i.e. YCbYCr) - * YCrYCb : Organized as 16bit YVYU (i.e. YCrYCb) - * CbYCrY : Organized as 16bit UYVY (i.e. CbYCrY) - * CrYCbY : Organized as 16bit VYUY (i.e. CrYCbY) - * YUV444Interleaved : Each pixel contains equal parts YUV - * RawBayer8bit : SMIA camera output format - * RawBayer10bit : SMIA camera output format - * RawBayer8bitcompressed : SMIA camera output format - */ -typedef enum OMX_COLOR_FORMATTYPE { - OMX_COLOR_FormatUnused, - OMX_COLOR_FormatMonochrome, - OMX_COLOR_Format8bitRGB332, - OMX_COLOR_Format12bitRGB444, - OMX_COLOR_Format16bitARGB4444, - OMX_COLOR_Format16bitARGB1555, - OMX_COLOR_Format16bitRGB565, - OMX_COLOR_Format16bitBGR565, - OMX_COLOR_Format18bitRGB666, - OMX_COLOR_Format18bitARGB1665, - OMX_COLOR_Format19bitARGB1666, - OMX_COLOR_Format24bitRGB888, - OMX_COLOR_Format24bitBGR888, - OMX_COLOR_Format24bitARGB1887, - OMX_COLOR_Format25bitARGB1888, - OMX_COLOR_Format32bitBGRA8888, - OMX_COLOR_Format32bitARGB8888, - OMX_COLOR_FormatYUV411Planar, - OMX_COLOR_FormatYUV411PackedPlanar, - OMX_COLOR_FormatYUV420Planar, - OMX_COLOR_FormatYUV420PackedPlanar, - OMX_COLOR_FormatYUV420SemiPlanar, - OMX_COLOR_FormatYUV422Planar, - OMX_COLOR_FormatYUV422PackedPlanar, - OMX_COLOR_FormatYUV422SemiPlanar, - OMX_COLOR_FormatYCbYCr, - OMX_COLOR_FormatYCrYCb, - OMX_COLOR_FormatCbYCrY, - OMX_COLOR_FormatCrYCbY, - OMX_COLOR_FormatYUV444Interleaved, - OMX_COLOR_FormatRawBayer8bit, - OMX_COLOR_FormatRawBayer10bit, - OMX_COLOR_FormatRawBayer8bitcompressed, - OMX_COLOR_FormatL2, - OMX_COLOR_FormatL4, - OMX_COLOR_FormatL8, - OMX_COLOR_FormatL16, - OMX_COLOR_FormatL24, - OMX_COLOR_FormatL32, - OMX_COLOR_FormatYUV420PackedSemiPlanar, - OMX_COLOR_FormatYUV422PackedSemiPlanar, - OMX_COLOR_Format18BitBGR666, - OMX_COLOR_Format24BitARGB6666, - OMX_COLOR_Format24BitABGR6666, - OMX_COLOR_FormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_COLOR_FormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - /** - -/** @defgroup imaging OpenMAX IL Imaging Domain - * @ingroup iv - * Structures for OpenMAX IL Imaging domain - * @{ - */ - -/** - * Enumeration used to define the possible image compression coding. - */ -typedef enum OMX_IMAGE_CODINGTYPE { - OMX_IMAGE_CodingUnused, /**< Value when format is N/A */ - OMX_IMAGE_CodingAutoDetect, /**< Auto detection of image format */ - OMX_IMAGE_CodingJPEG, /**< JPEG/JFIF image format */ - OMX_IMAGE_CodingJPEG2K, /**< JPEG 2000 image format */ - OMX_IMAGE_CodingEXIF, /**< EXIF image format */ - OMX_IMAGE_CodingTIFF, /**< TIFF image format */ - OMX_IMAGE_CodingGIF, /**< Graphics image format */ - OMX_IMAGE_CodingPNG, /**< PNG image format */ - OMX_IMAGE_CodingLZW, /**< LZW image format */ - OMX_IMAGE_CodingBMP, /**< Windows Bitmap format */ - OMX_IMAGE_CodingKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_IMAGE_CodingVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_IMAGE_CodingMax = 0x7FFFFFFF -} OMX_IMAGE_CODINGTYPE; - - -/** - * Data structure used to define an image path. The number of image paths - * for input and output will vary by type of the image component. - * - * Input (aka Source) : Zero Inputs, one Output, - * Splitter : One Input, 2 or more Outputs, - * Processing Element : One Input, one output, - * Mixer : 2 or more inputs, one output, - * Output (aka Sink) : One Input, zero outputs. - * - * The PortDefinition structure is used to define all of the parameters - * necessary for the compliant component to setup an input or an output - * image path. If additional vendor specific data is required, it should - * be transmitted to the component using the CustomCommand function. - * Compliant components will prepopulate this structure with optimal - * values during the OMX_GetParameter() command. - * - * STRUCT MEMBERS: - * cMIMEType : MIME type of data for the port - * pNativeRender : Platform specific reference for a display if a - * sync, otherwise this field is 0 - * nFrameWidth : Width of frame to be used on port if - * uncompressed format is used. Use 0 for - * unknown, don't care or variable - * nFrameHeight : Height of frame to be used on port if - * uncompressed format is used. Use 0 for - * unknown, don't care or variable - * nStride : Number of bytes per span of an image (i.e. - * indicates the number of bytes to get from - * span N to span N+1, where negative stride - * indicates the image is bottom up - * nSliceHeight : Height used when encoding in slices - * bFlagErrorConcealment : Turns on error concealment if it is supported by - * the OMX component - * eCompressionFormat : Compression format used in this instance of - * the component. When OMX_IMAGE_CodingUnused is - * specified, eColorFormat is valid - * eColorFormat : Decompressed format used by this component - * pNativeWindow : Platform specific reference for a window object if a - * display sink , otherwise this field is 0x0. - */ -typedef struct OMX_IMAGE_PORTDEFINITIONTYPE { - OMX_STRING cMIMEType; - OMX_NATIVE_DEVICETYPE pNativeRender; - OMX_U32 nFrameWidth; - OMX_U32 nFrameHeight; - OMX_S32 nStride; - OMX_U32 nSliceHeight; - OMX_BOOL bFlagErrorConcealment; - OMX_IMAGE_CODINGTYPE eCompressionFormat; - OMX_COLOR_FORMATTYPE eColorFormat; - OMX_NATIVE_WINDOWTYPE pNativeWindow; -} OMX_IMAGE_PORTDEFINITIONTYPE; - - -/** - * Port format parameter. This structure is used to enumerate the various - * data input/output format supported by the port. - * - * STRUCT MEMBERS: - * nSize : Size of the structure in bytes - * nVersion : OMX specification version information - * nPortIndex : Indicates which port to set - * nIndex : Indicates the enumeration index for the format from - * 0x0 to N-1 - * eCompressionFormat : Compression format used in this instance of the - * component. When OMX_IMAGE_CodingUnused is specified, - * eColorFormat is valid - * eColorFormat : Decompressed format used by this component - */ -typedef struct OMX_IMAGE_PARAM_PORTFORMATTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_U32 nIndex; - OMX_IMAGE_CODINGTYPE eCompressionFormat; - OMX_COLOR_FORMATTYPE eColorFormat; -} OMX_IMAGE_PARAM_PORTFORMATTYPE; - - -/** - * Flash control type - * - * ENUMS - * Torch : Flash forced constantly on - */ -typedef enum OMX_IMAGE_FLASHCONTROLTYPE { - OMX_IMAGE_FlashControlOn = 0, - OMX_IMAGE_FlashControlOff, - OMX_IMAGE_FlashControlAuto, - OMX_IMAGE_FlashControlRedEyeReduction, - OMX_IMAGE_FlashControlFillin, - OMX_IMAGE_FlashControlTorch, - OMX_IMAGE_FlashControlKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_IMAGE_FlashControlVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_IMAGE_FlashControlMax = 0x7FFFFFFF -} OMX_IMAGE_FLASHCONTROLTYPE; - - -/** - * Flash control configuration - * - * STRUCT MEMBERS: - * nSize : Size of the structure in bytes - * nVersion : OMX specification version information - * nPortIndex : Port that this structure applies to - * eFlashControl : Flash control type - */ -typedef struct OMX_IMAGE_PARAM_FLASHCONTROLTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_IMAGE_FLASHCONTROLTYPE eFlashControl; -} OMX_IMAGE_PARAM_FLASHCONTROLTYPE; - - -/** - * Focus control type - */ -typedef enum OMX_IMAGE_FOCUSCONTROLTYPE { - OMX_IMAGE_FocusControlOn = 0, - OMX_IMAGE_FocusControlOff, - OMX_IMAGE_FocusControlAuto, - OMX_IMAGE_FocusControlAutoLock, - OMX_IMAGE_FocusControlKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_IMAGE_FocusControlVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_IMAGE_FocusControlMax = 0x7FFFFFFF -} OMX_IMAGE_FOCUSCONTROLTYPE; - - -/** - * Focus control configuration - * - * STRUCT MEMBERS: - * nSize : Size of the structure in bytes - * nVersion : OMX specification version information - * nPortIndex : Port that this structure applies to - * eFocusControl : Focus control - * nFocusSteps : Focus can take on values from 0 mm to infinity. - * Interest is only in number of steps over this range. - * nFocusStepIndex : Current focus step index - */ -typedef struct OMX_IMAGE_CONFIG_FOCUSCONTROLTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_IMAGE_FOCUSCONTROLTYPE eFocusControl; - OMX_U32 nFocusSteps; - OMX_U32 nFocusStepIndex; -} OMX_IMAGE_CONFIG_FOCUSCONTROLTYPE; - - -/** - * Q Factor for JPEG compression, which controls the tradeoff between image - * quality and size. Q Factor provides a more simple means of controlling - * JPEG compression quality, without directly programming Quantization - * tables for chroma and luma - * - * STRUCT MEMBERS: - * nSize : Size of the structure in bytes - * nVersion : OMX specification version information - * nPortIndex : Port that this structure applies to - * nQFactor : JPEG Q factor value in the range of 1-100. A factor of 1 - * produces the smallest, worst quality images, and a factor - * of 100 produces the largest, best quality images. A - * typical default is 75 for small good quality images - */ -typedef struct OMX_IMAGE_PARAM_QFACTORTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_U32 nQFactor; -} OMX_IMAGE_PARAM_QFACTORTYPE; - -/** - * Quantization table type - */ - -typedef enum OMX_IMAGE_QUANTIZATIONTABLETYPE { - OMX_IMAGE_QuantizationTableLuma = 0, - OMX_IMAGE_QuantizationTableChroma, - OMX_IMAGE_QuantizationTableChromaCb, - OMX_IMAGE_QuantizationTableChromaCr, - OMX_IMAGE_QuantizationTableKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_IMAGE_QuantizationTableVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_IMAGE_QuantizationTableMax = 0x7FFFFFFF -} OMX_IMAGE_QUANTIZATIONTABLETYPE; - -/** - * JPEG quantization tables are used to determine DCT compression for - * YUV data, as an alternative to specifying Q factor, providing exact - * control of compression - * - * STRUCT MEMBERS: - * nSize : Size of the structure in bytes - * nVersion : OMX specification version information - * nPortIndex : Port that this structure applies to - * eQuantizationTable : Quantization table type - * nQuantizationMatrix[64] : JPEG quantization table of coefficients stored - * in increasing columns then by rows of data (i.e. - * row 1, ... row 8). Quantization values are in - * the range 0-255 and stored in linear order - * (i.e. the component will zig-zag the - * quantization table data if required internally) - */ -typedef struct OMX_IMAGE_PARAM_QUANTIZATIONTABLETYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_IMAGE_QUANTIZATIONTABLETYPE eQuantizationTable; - OMX_U8 nQuantizationMatrix[64]; -} OMX_IMAGE_PARAM_QUANTIZATIONTABLETYPE; - - -/** - * Huffman table type, the same Huffman table is applied for chroma and - * luma component - */ -typedef enum OMX_IMAGE_HUFFMANTABLETYPE { - OMX_IMAGE_HuffmanTableAC = 0, - OMX_IMAGE_HuffmanTableDC, - OMX_IMAGE_HuffmanTableACLuma, - OMX_IMAGE_HuffmanTableACChroma, - OMX_IMAGE_HuffmanTableDCLuma, - OMX_IMAGE_HuffmanTableDCChroma, - OMX_IMAGE_HuffmanTableKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_IMAGE_HuffmanTableVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_IMAGE_HuffmanTableMax = 0x7FFFFFFF -} OMX_IMAGE_HUFFMANTABLETYPE; - -/** - * JPEG Huffman table - * - * STRUCT MEMBERS: - * nSize : Size of the structure in bytes - * nVersion : OMX specification version information - * nPortIndex : Port that this structure applies to - * eHuffmanTable : Huffman table type - * nNumberOfHuffmanCodeOfLength[16] : 0-16, number of Huffman codes of each - * possible length - * nHuffmanTable[256] : 0-255, the size used for AC and DC - * HuffmanTable are 16 and 162 - */ -typedef struct OMX_IMAGE_PARAM_HUFFMANTTABLETYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_IMAGE_HUFFMANTABLETYPE eHuffmanTable; - OMX_U8 nNumberOfHuffmanCodeOfLength[16]; - OMX_U8 nHuffmanTable[256]; -}OMX_IMAGE_PARAM_HUFFMANTTABLETYPE; - -/** @} */ -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif -/* File EOF */ diff --git a/phonelibs/android_frameworks_native/include/media/openmax/OMX_Index.h b/phonelibs/android_frameworks_native/include/media/openmax/OMX_Index.h deleted file mode 100644 index 1a2a548e..00000000 --- a/phonelibs/android_frameworks_native/include/media/openmax/OMX_Index.h +++ /dev/null @@ -1,274 +0,0 @@ -/* ------------------------------------------------------------------ - * Copyright (C) 1998-2009 PacketVideo - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either - * express or implied. - * See the License for the specific language governing permissions - * and limitations under the License. - * ------------------------------------------------------------------- - */ -/* - * Copyright (c) 2008 The Khronos Group Inc. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation the rights to use, copy, modify, merge, publish, - * distribute, sublicense, and/or sell copies of the Software, and to - * permit persons to whom the Software is furnished to do so, subject - * to the following conditions: - * The above copyright notice and this permission notice shall be included - * in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. - * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY - * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, - * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE - * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - */ - -/** @file OMX_Index.h - OpenMax IL version 1.1.2 - * The OMX_Index header file contains the definitions for both applications - * and components . - */ - - -#ifndef OMX_Index_h -#define OMX_Index_h - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/* Each OMX header must include all required header files to allow the - * header to compile without errors. The includes below are required - * for this header file to compile successfully - */ -#include - -/** The OMX_INDEXTYPE enumeration is used to select a structure when either - * getting or setting parameters and/or configuration data. Each entry in - * this enumeration maps to an OMX specified structure. When the - * OMX_GetParameter, OMX_SetParameter, OMX_GetConfig or OMX_SetConfig methods - * are used, the second parameter will always be an entry from this enumeration - * and the third entry will be the structure shown in the comments for the entry. - * For example, if the application is initializing a cropping function, the - * OMX_SetConfig command would have OMX_IndexConfigCommonInputCrop as the second parameter - * and would send a pointer to an initialized OMX_RECTTYPE structure as the - * third parameter. - * - * The enumeration entries named with the OMX_Config prefix are sent using - * the OMX_SetConfig command and the enumeration entries named with the - * OMX_PARAM_ prefix are sent using the OMX_SetParameter command. - */ -typedef enum OMX_INDEXTYPE { - - OMX_IndexComponentStartUnused = 0x01000000, - OMX_IndexParamPriorityMgmt, /**< reference: OMX_PRIORITYMGMTTYPE */ - OMX_IndexParamAudioInit, /**< reference: OMX_PORT_PARAM_TYPE */ - OMX_IndexParamImageInit, /**< reference: OMX_PORT_PARAM_TYPE */ - OMX_IndexParamVideoInit, /**< reference: OMX_PORT_PARAM_TYPE */ - OMX_IndexParamOtherInit, /**< reference: OMX_PORT_PARAM_TYPE */ - OMX_IndexParamNumAvailableStreams, /**< reference: OMX_PARAM_U32TYPE */ - OMX_IndexParamActiveStream, /**< reference: OMX_PARAM_U32TYPE */ - OMX_IndexParamSuspensionPolicy, /**< reference: OMX_PARAM_SUSPENSIONPOLICYTYPE */ - OMX_IndexParamComponentSuspended, /**< reference: OMX_PARAM_SUSPENSIONTYPE */ - OMX_IndexConfigCapturing, /**< reference: OMX_CONFIG_BOOLEANTYPE */ - OMX_IndexConfigCaptureMode, /**< reference: OMX_CONFIG_CAPTUREMODETYPE */ - OMX_IndexAutoPauseAfterCapture, /**< reference: OMX_CONFIG_BOOLEANTYPE */ - OMX_IndexParamContentURI, /**< reference: OMX_PARAM_CONTENTURITYPE */ - OMX_IndexParamCustomContentPipe, /**< reference: OMX_PARAM_CONTENTPIPETYPE */ - OMX_IndexParamDisableResourceConcealment, /**< reference: OMX_RESOURCECONCEALMENTTYPE */ - OMX_IndexConfigMetadataItemCount, /**< reference: OMX_CONFIG_METADATAITEMCOUNTTYPE */ - OMX_IndexConfigContainerNodeCount, /**< reference: OMX_CONFIG_CONTAINERNODECOUNTTYPE */ - OMX_IndexConfigMetadataItem, /**< reference: OMX_CONFIG_METADATAITEMTYPE */ - OMX_IndexConfigCounterNodeID, /**< reference: OMX_CONFIG_CONTAINERNODEIDTYPE */ - OMX_IndexParamMetadataFilterType, /**< reference: OMX_PARAM_METADATAFILTERTYPE */ - OMX_IndexParamMetadataKeyFilter, /**< reference: OMX_PARAM_METADATAFILTERTYPE */ - OMX_IndexConfigPriorityMgmt, /**< reference: OMX_PRIORITYMGMTTYPE */ - OMX_IndexParamStandardComponentRole, /**< reference: OMX_PARAM_COMPONENTROLETYPE */ - - OMX_IndexPortStartUnused = 0x02000000, - OMX_IndexParamPortDefinition, /**< reference: OMX_PARAM_PORTDEFINITIONTYPE */ - OMX_IndexParamCompBufferSupplier, /**< reference: OMX_PARAM_BUFFERSUPPLIERTYPE */ - OMX_IndexReservedStartUnused = 0x03000000, - - /* Audio parameters and configurations */ - OMX_IndexAudioStartUnused = 0x04000000, - OMX_IndexParamAudioPortFormat, /**< reference: OMX_AUDIO_PARAM_PORTFORMATTYPE */ - OMX_IndexParamAudioPcm, /**< reference: OMX_AUDIO_PARAM_PCMMODETYPE */ - OMX_IndexParamAudioAac, /**< reference: OMX_AUDIO_PARAM_AACPROFILETYPE */ - OMX_IndexParamAudioRa, /**< reference: OMX_AUDIO_PARAM_RATYPE */ - OMX_IndexParamAudioMp3, /**< reference: OMX_AUDIO_PARAM_MP3TYPE */ - OMX_IndexParamAudioAdpcm, /**< reference: OMX_AUDIO_PARAM_ADPCMTYPE */ - OMX_IndexParamAudioG723, /**< reference: OMX_AUDIO_PARAM_G723TYPE */ - OMX_IndexParamAudioG729, /**< reference: OMX_AUDIO_PARAM_G729TYPE */ - OMX_IndexParamAudioAmr, /**< reference: OMX_AUDIO_PARAM_AMRTYPE */ - OMX_IndexParamAudioWma, /**< reference: OMX_AUDIO_PARAM_WMATYPE */ - OMX_IndexParamAudioSbc, /**< reference: OMX_AUDIO_PARAM_SBCTYPE */ - OMX_IndexParamAudioMidi, /**< reference: OMX_AUDIO_PARAM_MIDITYPE */ - OMX_IndexParamAudioGsm_FR, /**< reference: OMX_AUDIO_PARAM_GSMFRTYPE */ - OMX_IndexParamAudioMidiLoadUserSound, /**< reference: OMX_AUDIO_PARAM_MIDILOADUSERSOUNDTYPE */ - OMX_IndexParamAudioG726, /**< reference: OMX_AUDIO_PARAM_G726TYPE */ - OMX_IndexParamAudioGsm_EFR, /**< reference: OMX_AUDIO_PARAM_GSMEFRTYPE */ - OMX_IndexParamAudioGsm_HR, /**< reference: OMX_AUDIO_PARAM_GSMHRTYPE */ - OMX_IndexParamAudioPdc_FR, /**< reference: OMX_AUDIO_PARAM_PDCFRTYPE */ - OMX_IndexParamAudioPdc_EFR, /**< reference: OMX_AUDIO_PARAM_PDCEFRTYPE */ - OMX_IndexParamAudioPdc_HR, /**< reference: OMX_AUDIO_PARAM_PDCHRTYPE */ - OMX_IndexParamAudioTdma_FR, /**< reference: OMX_AUDIO_PARAM_TDMAFRTYPE */ - OMX_IndexParamAudioTdma_EFR, /**< reference: OMX_AUDIO_PARAM_TDMAEFRTYPE */ - OMX_IndexParamAudioQcelp8, /**< reference: OMX_AUDIO_PARAM_QCELP8TYPE */ - OMX_IndexParamAudioQcelp13, /**< reference: OMX_AUDIO_PARAM_QCELP13TYPE */ - OMX_IndexParamAudioEvrc, /**< reference: OMX_AUDIO_PARAM_EVRCTYPE */ - OMX_IndexParamAudioSmv, /**< reference: OMX_AUDIO_PARAM_SMVTYPE */ - OMX_IndexParamAudioVorbis, /**< reference: OMX_AUDIO_PARAM_VORBISTYPE */ - OMX_IndexParamAudioFlac, /**< reference: OMX_AUDIO_PARAM_FLACTYPE */ - - OMX_IndexConfigAudioMidiImmediateEvent, /**< reference: OMX_AUDIO_CONFIG_MIDIIMMEDIATEEVENTTYPE */ - OMX_IndexConfigAudioMidiControl, /**< reference: OMX_AUDIO_CONFIG_MIDICONTROLTYPE */ - OMX_IndexConfigAudioMidiSoundBankProgram, /**< reference: OMX_AUDIO_CONFIG_MIDISOUNDBANKPROGRAMTYPE */ - OMX_IndexConfigAudioMidiStatus, /**< reference: OMX_AUDIO_CONFIG_MIDISTATUSTYPE */ - OMX_IndexConfigAudioMidiMetaEvent, /**< reference: OMX_AUDIO_CONFIG_MIDIMETAEVENTTYPE */ - OMX_IndexConfigAudioMidiMetaEventData, /**< reference: OMX_AUDIO_CONFIG_MIDIMETAEVENTDATATYPE */ - OMX_IndexConfigAudioVolume, /**< reference: OMX_AUDIO_CONFIG_VOLUMETYPE */ - OMX_IndexConfigAudioBalance, /**< reference: OMX_AUDIO_CONFIG_BALANCETYPE */ - OMX_IndexConfigAudioChannelMute, /**< reference: OMX_AUDIO_CONFIG_CHANNELMUTETYPE */ - OMX_IndexConfigAudioMute, /**< reference: OMX_AUDIO_CONFIG_MUTETYPE */ - OMX_IndexConfigAudioLoudness, /**< reference: OMX_AUDIO_CONFIG_LOUDNESSTYPE */ - OMX_IndexConfigAudioEchoCancelation, /**< reference: OMX_AUDIO_CONFIG_ECHOCANCELATIONTYPE */ - OMX_IndexConfigAudioNoiseReduction, /**< reference: OMX_AUDIO_CONFIG_NOISEREDUCTIONTYPE */ - OMX_IndexConfigAudioBass, /**< reference: OMX_AUDIO_CONFIG_BASSTYPE */ - OMX_IndexConfigAudioTreble, /**< reference: OMX_AUDIO_CONFIG_TREBLETYPE */ - OMX_IndexConfigAudioStereoWidening, /**< reference: OMX_AUDIO_CONFIG_STEREOWIDENINGTYPE */ - OMX_IndexConfigAudioChorus, /**< reference: OMX_AUDIO_CONFIG_CHORUSTYPE */ - OMX_IndexConfigAudioEqualizer, /**< reference: OMX_AUDIO_CONFIG_EQUALIZERTYPE */ - OMX_IndexConfigAudioReverberation, /**< reference: OMX_AUDIO_CONFIG_REVERBERATIONTYPE */ - OMX_IndexConfigAudioChannelVolume, /**< reference: OMX_AUDIO_CONFIG_CHANNELVOLUMETYPE */ - - /* Image specific parameters and configurations */ - OMX_IndexImageStartUnused = 0x05000000, - OMX_IndexParamImagePortFormat, /**< reference: OMX_IMAGE_PARAM_PORTFORMATTYPE */ - OMX_IndexParamFlashControl, /**< reference: OMX_IMAGE_PARAM_FLASHCONTROLTYPE */ - OMX_IndexConfigFocusControl, /**< reference: OMX_IMAGE_CONFIG_FOCUSCONTROLTYPE */ - OMX_IndexParamQFactor, /**< reference: OMX_IMAGE_PARAM_QFACTORTYPE */ - OMX_IndexParamQuantizationTable, /**< reference: OMX_IMAGE_PARAM_QUANTIZATIONTABLETYPE */ - OMX_IndexParamHuffmanTable, /**< reference: OMX_IMAGE_PARAM_HUFFMANTTABLETYPE */ - OMX_IndexConfigFlashControl, /**< reference: OMX_IMAGE_PARAM_FLASHCONTROLTYPE */ - - /* Video specific parameters and configurations */ - OMX_IndexVideoStartUnused = 0x06000000, - OMX_IndexParamVideoPortFormat, /**< reference: OMX_VIDEO_PARAM_PORTFORMATTYPE */ - OMX_IndexParamVideoQuantization, /**< reference: OMX_VIDEO_PARAM_QUANTIZATIONTYPE */ - OMX_IndexParamVideoFastUpdate, /**< reference: OMX_VIDEO_PARAM_VIDEOFASTUPDATETYPE */ - OMX_IndexParamVideoBitrate, /**< reference: OMX_VIDEO_PARAM_BITRATETYPE */ - OMX_IndexParamVideoMotionVector, /**< reference: OMX_VIDEO_PARAM_MOTIONVECTORTYPE */ - OMX_IndexParamVideoIntraRefresh, /**< reference: OMX_VIDEO_PARAM_INTRAREFRESHTYPE */ - OMX_IndexParamVideoErrorCorrection, /**< reference: OMX_VIDEO_PARAM_ERRORCORRECTIONTYPE */ - OMX_IndexParamVideoVBSMC, /**< reference: OMX_VIDEO_PARAM_VBSMCTYPE */ - OMX_IndexParamVideoMpeg2, /**< reference: OMX_VIDEO_PARAM_MPEG2TYPE */ - OMX_IndexParamVideoMpeg4, /**< reference: OMX_VIDEO_PARAM_MPEG4TYPE */ - OMX_IndexParamVideoWmv, /**< reference: OMX_VIDEO_PARAM_WMVTYPE */ - OMX_IndexParamVideoRv, /**< reference: OMX_VIDEO_PARAM_RVTYPE */ - OMX_IndexParamVideoAvc, /**< reference: OMX_VIDEO_PARAM_AVCTYPE */ - OMX_IndexParamVideoH263, /**< reference: OMX_VIDEO_PARAM_H263TYPE */ - OMX_IndexParamVideoProfileLevelQuerySupported, /**< reference: OMX_VIDEO_PARAM_PROFILELEVELTYPE */ - OMX_IndexParamVideoProfileLevelCurrent, /**< reference: OMX_VIDEO_PARAM_PROFILELEVELTYPE */ - OMX_IndexConfigVideoBitrate, /**< reference: OMX_VIDEO_CONFIG_BITRATETYPE */ - OMX_IndexConfigVideoFramerate, /**< reference: OMX_CONFIG_FRAMERATETYPE */ - OMX_IndexConfigVideoIntraVOPRefresh, /**< reference: OMX_CONFIG_INTRAREFRESHVOPTYPE */ - OMX_IndexConfigVideoIntraMBRefresh, /**< reference: OMX_CONFIG_MACROBLOCKERRORMAPTYPE */ - OMX_IndexConfigVideoMBErrorReporting, /**< reference: OMX_CONFIG_MBERRORREPORTINGTYPE */ - OMX_IndexParamVideoMacroblocksPerFrame, /**< reference: OMX_PARAM_MACROBLOCKSTYPE */ - OMX_IndexConfigVideoMacroBlockErrorMap, /**< reference: OMX_CONFIG_MACROBLOCKERRORMAPTYPE */ - OMX_IndexParamVideoSliceFMO, /**< reference: OMX_VIDEO_PARAM_AVCSLICEFMO */ - OMX_IndexConfigVideoAVCIntraPeriod, /**< reference: OMX_VIDEO_CONFIG_AVCINTRAPERIOD */ - OMX_IndexConfigVideoNalSize, /**< reference: OMX_VIDEO_CONFIG_NALSIZE */ - - /* Image & Video common Configurations */ - OMX_IndexCommonStartUnused = 0x07000000, - OMX_IndexParamCommonDeblocking, /**< reference: OMX_PARAM_DEBLOCKINGTYPE */ - OMX_IndexParamCommonSensorMode, /**< reference: OMX_PARAM_SENSORMODETYPE */ - OMX_IndexParamCommonInterleave, /**< reference: OMX_PARAM_INTERLEAVETYPE */ - OMX_IndexConfigCommonColorFormatConversion, /**< reference: OMX_CONFIG_COLORCONVERSIONTYPE */ - OMX_IndexConfigCommonScale, /**< reference: OMX_CONFIG_SCALEFACTORTYPE */ - OMX_IndexConfigCommonImageFilter, /**< reference: OMX_CONFIG_IMAGEFILTERTYPE */ - OMX_IndexConfigCommonColorEnhancement, /**< reference: OMX_CONFIG_COLORENHANCEMENTTYPE */ - OMX_IndexConfigCommonColorKey, /**< reference: OMX_CONFIG_COLORKEYTYPE */ - OMX_IndexConfigCommonColorBlend, /**< reference: OMX_CONFIG_COLORBLENDTYPE */ - OMX_IndexConfigCommonFrameStabilisation,/**< reference: OMX_CONFIG_FRAMESTABTYPE */ - OMX_IndexConfigCommonRotate, /**< reference: OMX_CONFIG_ROTATIONTYPE */ - OMX_IndexConfigCommonMirror, /**< reference: OMX_CONFIG_MIRRORTYPE */ - OMX_IndexConfigCommonOutputPosition, /**< reference: OMX_CONFIG_POINTTYPE */ - OMX_IndexConfigCommonInputCrop, /**< reference: OMX_CONFIG_RECTTYPE */ - OMX_IndexConfigCommonOutputCrop, /**< reference: OMX_CONFIG_RECTTYPE */ - OMX_IndexConfigCommonDigitalZoom, /**< reference: OMX_CONFIG_SCALEFACTORTYPE */ - OMX_IndexConfigCommonOpticalZoom, /**< reference: OMX_CONFIG_SCALEFACTORTYPE*/ - OMX_IndexConfigCommonWhiteBalance, /**< reference: OMX_CONFIG_WHITEBALCONTROLTYPE */ - OMX_IndexConfigCommonExposure, /**< reference: OMX_CONFIG_EXPOSURECONTROLTYPE */ - OMX_IndexConfigCommonContrast, /**< reference: OMX_CONFIG_CONTRASTTYPE */ - OMX_IndexConfigCommonBrightness, /**< reference: OMX_CONFIG_BRIGHTNESSTYPE */ - OMX_IndexConfigCommonBacklight, /**< reference: OMX_CONFIG_BACKLIGHTTYPE */ - OMX_IndexConfigCommonGamma, /**< reference: OMX_CONFIG_GAMMATYPE */ - OMX_IndexConfigCommonSaturation, /**< reference: OMX_CONFIG_SATURATIONTYPE */ - OMX_IndexConfigCommonLightness, /**< reference: OMX_CONFIG_LIGHTNESSTYPE */ - OMX_IndexConfigCommonExclusionRect, /**< reference: OMX_CONFIG_RECTTYPE */ - OMX_IndexConfigCommonDithering, /**< reference: OMX_CONFIG_DITHERTYPE */ - OMX_IndexConfigCommonPlaneBlend, /**< reference: OMX_CONFIG_PLANEBLENDTYPE */ - OMX_IndexConfigCommonExposureValue, /**< reference: OMX_CONFIG_EXPOSUREVALUETYPE */ - OMX_IndexConfigCommonOutputSize, /**< reference: OMX_FRAMESIZETYPE */ - OMX_IndexParamCommonExtraQuantData, /**< reference: OMX_OTHER_EXTRADATATYPE */ - OMX_IndexConfigCommonFocusRegion, /**< reference: OMX_CONFIG_FOCUSREGIONTYPE */ - OMX_IndexConfigCommonFocusStatus, /**< reference: OMX_PARAM_FOCUSSTATUSTYPE */ - OMX_IndexConfigCommonTransitionEffect, /**< reference: OMX_CONFIG_TRANSITIONEFFECTTYPE */ - - /* Reserved Configuration range */ - OMX_IndexOtherStartUnused = 0x08000000, - OMX_IndexParamOtherPortFormat, /**< reference: OMX_OTHER_PARAM_PORTFORMATTYPE */ - OMX_IndexConfigOtherPower, /**< reference: OMX_OTHER_CONFIG_POWERTYPE */ - OMX_IndexConfigOtherStats, /**< reference: OMX_OTHER_CONFIG_STATSTYPE */ - - - /* Reserved Time range */ - OMX_IndexTimeStartUnused = 0x09000000, - OMX_IndexConfigTimeScale, /**< reference: OMX_TIME_CONFIG_SCALETYPE */ - OMX_IndexConfigTimeClockState, /**< reference: OMX_TIME_CONFIG_CLOCKSTATETYPE */ - OMX_IndexConfigTimeActiveRefClock, /**< reference: OMX_TIME_CONFIG_ACTIVEREFCLOCKTYPE */ - OMX_IndexConfigTimeCurrentMediaTime, /**< reference: OMX_TIME_CONFIG_TIMESTAMPTYPE (read only) */ - OMX_IndexConfigTimeCurrentWallTime, /**< reference: OMX_TIME_CONFIG_TIMESTAMPTYPE (read only) */ - OMX_IndexConfigTimeCurrentAudioReference, /**< reference: OMX_TIME_CONFIG_TIMESTAMPTYPE (write only) */ - OMX_IndexConfigTimeCurrentVideoReference, /**< reference: OMX_TIME_CONFIG_TIMESTAMPTYPE (write only) */ - OMX_IndexConfigTimeMediaTimeRequest, /**< reference: OMX_TIME_CONFIG_MEDIATIMEREQUESTTYPE (write only) */ - OMX_IndexConfigTimeClientStartTime, /** - - -/** Khronos standard extension indices. - -This enum lists the current Khronos extension indices to OpenMAX IL. -*/ -typedef enum OMX_INDEXEXTTYPE { - - /* Component parameters and configurations */ - OMX_IndexExtComponentStartUnused = OMX_IndexKhronosExtensions + 0x00100000, - OMX_IndexConfigCallbackRequest, /**< reference: OMX_CONFIG_CALLBACKREQUESTTYPE */ - OMX_IndexConfigCommitMode, /**< reference: OMX_CONFIG_COMMITMODETYPE */ - OMX_IndexConfigCommit, /**< reference: OMX_CONFIG_COMMITTYPE */ - - /* Port parameters and configurations */ - OMX_IndexExtPortStartUnused = OMX_IndexKhronosExtensions + 0x00200000, - - /* Audio parameters and configurations */ - OMX_IndexExtAudioStartUnused = OMX_IndexKhronosExtensions + 0x00400000, - OMX_IndexParamAudioAndroidAc3, /**< reference: OMX_AUDIO_PARAM_ANDROID_AC3TYPE */ - OMX_IndexParamAudioAndroidOpus, /**< reference: OMX_AUDIO_PARAM_ANDROID_OPUSTYPE */ - OMX_IndexParamAudioAndroidAacPresentation, /**< reference: OMX_AUDIO_PARAM_ANDROID_AACPRESENTATIONTYPE */ - OMX_IndexParamAudioAndroidEac3, /**< reference: OMX_AUDIO_PARAM_ANDROID_EAC3TYPE */ - - /* Image parameters and configurations */ - OMX_IndexExtImageStartUnused = OMX_IndexKhronosExtensions + 0x00500000, - - /* Video parameters and configurations */ - OMX_IndexExtVideoStartUnused = OMX_IndexKhronosExtensions + 0x00600000, - OMX_IndexParamNalStreamFormatSupported, /**< reference: OMX_NALSTREAMFORMATTYPE */ - OMX_IndexParamNalStreamFormat, /**< reference: OMX_NALSTREAMFORMATTYPE */ - OMX_IndexParamNalStreamFormatSelect, /**< reference: OMX_NALSTREAMFORMATTYPE */ - OMX_IndexParamVideoVp8, /**< reference: OMX_VIDEO_PARAM_VP8TYPE */ - OMX_IndexConfigVideoVp8ReferenceFrame, /**< reference: OMX_VIDEO_VP8REFERENCEFRAMETYPE */ - OMX_IndexConfigVideoVp8ReferenceFrameType, /**< reference: OMX_VIDEO_VP8REFERENCEFRAMEINFOTYPE */ - OMX_IndexParamVideoAndroidVp8Encoder, /**< reference: OMX_VIDEO_PARAM_ANDROID_VP8ENCODERTYPE */ - OMX_IndexParamVideoHevc, /**< reference: OMX_VIDEO_PARAM_HEVCTYPE */ - OMX_IndexParamSliceSegments, /**< reference: OMX_VIDEO_SLICESEGMENTSTYPE */ - - /* Image & Video common configurations */ - OMX_IndexExtCommonStartUnused = OMX_IndexKhronosExtensions + 0x00700000, - - /* Other configurations */ - OMX_IndexExtOtherStartUnused = OMX_IndexKhronosExtensions + 0x00800000, - OMX_IndexConfigAutoFramerateConversion, /**< reference: OMX_CONFIG_BOOLEANTYPE */ - OMX_IndexConfigPriority, /**< reference: OMX_PARAM_U32TYPE */ - OMX_IndexConfigOperatingRate, /**< reference: OMX_PARAM_U32TYPE in Q16 format for video and in Hz for audio */ - OMX_IndexParamConsumerUsageBits, /**< reference: OMX_PARAM_U32TYPE */ - - /* Time configurations */ - OMX_IndexExtTimeStartUnused = OMX_IndexKhronosExtensions + 0x00900000, - - OMX_IndexExtMax = 0x7FFFFFFF -} OMX_INDEXEXTTYPE; - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif /* OMX_IndexExt_h */ -/* File EOF */ diff --git a/phonelibs/android_frameworks_native/include/media/openmax/OMX_Other.h b/phonelibs/android_frameworks_native/include/media/openmax/OMX_Other.h deleted file mode 100644 index 6072ef62..00000000 --- a/phonelibs/android_frameworks_native/include/media/openmax/OMX_Other.h +++ /dev/null @@ -1,354 +0,0 @@ -/* ------------------------------------------------------------------ - * Copyright (C) 1998-2009 PacketVideo - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either - * express or implied. - * See the License for the specific language governing permissions - * and limitations under the License. - * ------------------------------------------------------------------- - */ -/* - * Copyright (c) 2008 The Khronos Group Inc. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation the rights to use, copy, modify, merge, publish, - * distribute, sublicense, and/or sell copies of the Software, and to - * permit persons to whom the Software is furnished to do so, subject - * to the following conditions: - * The above copyright notice and this permission notice shall be included - * in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. - * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY - * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, - * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE - * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - */ - -/** @file OMX_Other.h - OpenMax IL version 1.1.2 - * The structures needed by Other components to exchange - * parameters and configuration data with the components. - */ - -#ifndef OMX_Other_h -#define OMX_Other_h - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - - -/* Each OMX header must include all required header files to allow the - * header to compile without errors. The includes below are required - * for this header file to compile successfully - */ - -#include - - -/** - * Enumeration of possible data types which match to multiple domains or no - * domain at all. For types which are vendor specific, a value above - * OMX_OTHER_VENDORTSTART should be used. - */ -typedef enum OMX_OTHER_FORMATTYPE { - OMX_OTHER_FormatTime = 0, /**< Transmission of various timestamps, elapsed time, - time deltas, etc */ - OMX_OTHER_FormatPower, /**< Perhaps used for enabling/disabling power - management, setting clocks? */ - OMX_OTHER_FormatStats, /**< Could be things such as frame rate, frames - dropped, etc */ - OMX_OTHER_FormatBinary, /**< Arbitrary binary data */ - OMX_OTHER_FormatVendorReserved = 1000, /**< Starting value for vendor specific - formats */ - - OMX_OTHER_FormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_OTHER_FormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_OTHER_FormatMax = 0x7FFFFFFF -} OMX_OTHER_FORMATTYPE; - -/** - * Enumeration of seek modes. - */ -typedef enum OMX_TIME_SEEKMODETYPE { - OMX_TIME_SeekModeFast = 0, /**< Prefer seeking to an approximation - * of the requested seek position over - * the actual seek position if it - * results in a faster seek. */ - OMX_TIME_SeekModeAccurate, /**< Prefer seeking to the actual seek - * position over an approximation - * of the requested seek position even - * if it results in a slower seek. */ - OMX_TIME_SeekModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_TIME_SeekModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_TIME_SeekModeMax = 0x7FFFFFFF -} OMX_TIME_SEEKMODETYPE; - -/* Structure representing the seekmode of the component */ -typedef struct OMX_TIME_CONFIG_SEEKMODETYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_TIME_SEEKMODETYPE eType; /**< The seek mode */ -} OMX_TIME_CONFIG_SEEKMODETYPE; - -/** Structure representing a time stamp used with the following configs - * on the Clock Component (CC): - * - * OMX_IndexConfigTimeCurrentWallTime: query of the CC's current wall - * time - * OMX_IndexConfigTimeCurrentMediaTime: query of the CC's current media - * time - * OMX_IndexConfigTimeCurrentAudioReference and - * OMX_IndexConfigTimeCurrentVideoReference: audio/video reference - * clock sending SC its reference time - * OMX_IndexConfigTimeClientStartTime: a Clock Component client sends - * this structure to the Clock Component via a SetConfig on its - * client port when it receives a buffer with - * OMX_BUFFERFLAG_STARTTIME set. It must use the timestamp - * specified by that buffer for nStartTimestamp. - * - * It's also used with the following config on components in general: - * - * OMX_IndexConfigTimePosition: IL client querying component position - * (GetConfig) or commanding a component to seek to the given location - * (SetConfig) - */ -typedef struct OMX_TIME_CONFIG_TIMESTAMPTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version - * information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_TICKS nTimestamp; /**< timestamp .*/ -} OMX_TIME_CONFIG_TIMESTAMPTYPE; - -/** Enumeration of possible reference clocks to the media time. */ -typedef enum OMX_TIME_UPDATETYPE { - OMX_TIME_UpdateRequestFulfillment, /**< Update is the fulfillment of a media time request. */ - OMX_TIME_UpdateScaleChanged, /**< Update was generated because the scale chagned. */ - OMX_TIME_UpdateClockStateChanged, /**< Update was generated because the clock state changed. */ - OMX_TIME_UpdateKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_TIME_UpdateVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_TIME_UpdateMax = 0x7FFFFFFF -} OMX_TIME_UPDATETYPE; - -/** Enumeration of possible reference clocks to the media time. */ -typedef enum OMX_TIME_REFCLOCKTYPE { - OMX_TIME_RefClockNone, /**< Use no references. */ - OMX_TIME_RefClockAudio, /**< Use references sent through OMX_IndexConfigTimeCurrentAudioReference */ - OMX_TIME_RefClockVideo, /**< Use references sent through OMX_IndexConfigTimeCurrentVideoReference */ - OMX_TIME_RefClockKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_TIME_RefClockVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_TIME_RefClockMax = 0x7FFFFFFF -} OMX_TIME_REFCLOCKTYPE; - -/** Enumeration of clock states. */ -typedef enum OMX_TIME_CLOCKSTATE { - OMX_TIME_ClockStateRunning, /**< Clock running. */ - OMX_TIME_ClockStateWaitingForStartTime, /**< Clock waiting until the - * prescribed clients emit their - * start time. */ - OMX_TIME_ClockStateStopped, /**< Clock stopped. */ - OMX_TIME_ClockStateKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_TIME_ClockStateVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_TIME_ClockStateMax = 0x7FFFFFFF -} OMX_TIME_CLOCKSTATE; - -/** Structure representing a media time request to the clock component. - * - * A client component sends this structure to the Clock Component via a SetConfig - * on its client port to specify a media timestamp the Clock Component - * should emit. The Clock Component should fulfill the request by sending a - * OMX_TIME_MEDIATIMETYPE when its media clock matches the requested - * timestamp. - * - * The client may require a media time request be fulfilled slightly - * earlier than the media time specified. In this case the client specifies - * an offset which is equal to the difference between wall time corresponding - * to the requested media time and the wall time when it will be - * fulfilled. - * - * A client component may uses these requests and the OMX_TIME_MEDIATIMETYPE to - * time events according to timestamps. If a client must perform an operation O at - * a time T (e.g. deliver a video frame at its corresponding timestamp), it makes a - * media time request at T (perhaps specifying an offset to ensure the request fulfillment - * is a little early). When the clock component passes the resulting OMX_TIME_MEDIATIMETYPE - * structure back to the client component, the client may perform operation O (perhaps having - * to wait a slight amount more time itself as specified by the return values). - */ - -typedef struct OMX_TIME_CONFIG_MEDIATIMEREQUESTTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< port that this structure applies to */ - OMX_PTR pClientPrivate; /**< Client private data to disabiguate this media time - * from others (e.g. the number of the frame to deliver). - * Duplicated in the media time structure that fulfills - * this request. A value of zero is reserved for time scale - * updates. */ - OMX_TICKS nMediaTimestamp; /**< Media timestamp requested.*/ - OMX_TICKS nOffset; /**< Amount of wall clock time by which this - * request should be fulfilled early */ -} OMX_TIME_CONFIG_MEDIATIMEREQUESTTYPE; - -/**< Structure sent from the clock component client either when fulfilling - * a media time request or when the time scale has changed. - * - * In the former case the Clock Component fills this structure and times its emission - * to a client component (via the client port) according to the corresponding media - * time request sent by the client. The Clock Component should time the emission to occur - * when the requested timestamp matches the Clock Component's media time but also the - * prescribed offset early. - * - * Upon scale changes the clock component clears the nClientPrivate data, sends the current - * media time and sets the nScale to the new scale via the client port. It emits a - * OMX_TIME_MEDIATIMETYPE to all clients independent of any requests. This allows clients to - * alter processing to accomodate scaling. For instance a video component might skip inter-frames - * in the case of extreme fastforward. Likewise an audio component might add or remove samples - * from an audio frame to scale audio data. - * - * It is expected that some clock components may not be able to fulfill requests - * at exactly the prescribed time. This is acceptable so long as the request is - * fulfilled at least as early as described and not later. This structure provides - * fields the client may use to wait for the remaining time. - * - * The client may use either the nOffset or nWallTimeAtMedia fields to determine the - * wall time until the nMediaTimestamp actually occurs. In the latter case the - * client can get a more accurate value for offset by getting the current wall - * from the cloc component and subtracting it from nWallTimeAtMedia. - */ - -typedef struct OMX_TIME_MEDIATIMETYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nClientPrivate; /**< Client private data to disabiguate this media time - * from others. Copied from the media time request. - * A value of zero is reserved for time scale updates. */ - OMX_TIME_UPDATETYPE eUpdateType; /**< Reason for the update */ - OMX_TICKS nMediaTimestamp; /**< Media time requested. If no media time was - * requested then this is the current media time. */ - OMX_TICKS nOffset; /**< Amount of wall clock time by which this - * request was actually fulfilled early */ - - OMX_TICKS nWallTimeAtMediaTime; /**< Wall time corresponding to nMediaTimeStamp. - * A client may compare this value to current - * media time obtained from the Clock Component to determine - * the wall time until the media timestamp is really - * current. */ - OMX_S32 xScale; /**< Current media time scale in Q16 format. */ - OMX_TIME_CLOCKSTATE eState; /* Seeking Change. Added 7/12.*/ - /**< State of the media time. */ -} OMX_TIME_MEDIATIMETYPE; - -/** Structure representing the current media time scale factor. Applicable only to clock - * component, other components see scale changes via OMX_TIME_MEDIATIMETYPE buffers sent via - * the clock component client ports. Upon recieving this config the clock component changes - * the rate by which the media time increases or decreases effectively implementing trick modes. - */ -typedef struct OMX_TIME_CONFIG_SCALETYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_S32 xScale; /**< This is a value in Q16 format which is used for - * scaling the media time */ -} OMX_TIME_CONFIG_SCALETYPE; - -/** Bits used to identify a clock port. Used in OMX_TIME_CONFIG_CLOCKSTATETYPE's nWaitMask field */ -#define OMX_CLOCKPORT0 0x00000001 -#define OMX_CLOCKPORT1 0x00000002 -#define OMX_CLOCKPORT2 0x00000004 -#define OMX_CLOCKPORT3 0x00000008 -#define OMX_CLOCKPORT4 0x00000010 -#define OMX_CLOCKPORT5 0x00000020 -#define OMX_CLOCKPORT6 0x00000040 -#define OMX_CLOCKPORT7 0x00000080 - -/** Structure representing the current mode of the media clock. - * IL Client uses this config to change or query the mode of the - * media clock of the clock component. Applicable only to clock - * component. - * - * On a SetConfig if eState is OMX_TIME_ClockStateRunning media time - * starts immediately at the prescribed start time. If - * OMX_TIME_ClockStateWaitingForStartTime the Clock Component ignores - * the given nStartTime and waits for all clients specified in the - * nWaitMask to send starttimes (via - * OMX_IndexConfigTimeClientStartTime). The Clock Component then starts - * the media clock using the earliest start time supplied. */ -typedef struct OMX_TIME_CONFIG_CLOCKSTATETYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version - * information */ - OMX_TIME_CLOCKSTATE eState; /**< State of the media time. */ - OMX_TICKS nStartTime; /**< Start time of the media time. */ - OMX_TICKS nOffset; /**< Time to offset the media time by - * (e.g. preroll). Media time will be - * reported to be nOffset ticks earlier. - */ - OMX_U32 nWaitMask; /**< Mask of OMX_CLOCKPORT values. */ -} OMX_TIME_CONFIG_CLOCKSTATETYPE; - -/** Structure representing the reference clock currently being used to - * compute media time. IL client uses this config to change or query the - * clock component's active reference clock */ -typedef struct OMX_TIME_CONFIG_ACTIVEREFCLOCKTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_TIME_REFCLOCKTYPE eClock; /**< Reference clock used to compute media time */ -} OMX_TIME_CONFIG_ACTIVEREFCLOCKTYPE; - -/** Descriptor for setting specifics of power type. - * Note: this structure is listed for backwards compatibility. */ -typedef struct OMX_OTHER_CONFIG_POWERTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_BOOL bEnablePM; /**< Flag to enable Power Management */ -} OMX_OTHER_CONFIG_POWERTYPE; - - -/** Descriptor for setting specifics of stats type. - * Note: this structure is listed for backwards compatibility. */ -typedef struct OMX_OTHER_CONFIG_STATSTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - /* what goes here */ -} OMX_OTHER_CONFIG_STATSTYPE; - - -/** - * The PortDefinition structure is used to define all of the parameters - * necessary for the compliant component to setup an input or an output other - * path. - */ -typedef struct OMX_OTHER_PORTDEFINITIONTYPE { - OMX_OTHER_FORMATTYPE eFormat; /**< Type of data expected for this channel */ -} OMX_OTHER_PORTDEFINITIONTYPE; - -/** Port format parameter. This structure is used to enumerate - * the various data input/output format supported by the port. - */ -typedef struct OMX_OTHER_PARAM_PORTFORMATTYPE { - OMX_U32 nSize; /**< size of the structure in bytes */ - OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ - OMX_U32 nPortIndex; /**< Indicates which port to set */ - OMX_U32 nIndex; /**< Indicates the enumeration index for the format from 0x0 to N-1 */ - OMX_OTHER_FORMATTYPE eFormat; /**< Type of data expected for this channel */ -} OMX_OTHER_PARAM_PORTFORMATTYPE; - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif -/* File EOF */ diff --git a/phonelibs/android_frameworks_native/include/media/openmax/OMX_Types.h b/phonelibs/android_frameworks_native/include/media/openmax/OMX_Types.h deleted file mode 100644 index 5afaba05..00000000 --- a/phonelibs/android_frameworks_native/include/media/openmax/OMX_Types.h +++ /dev/null @@ -1,387 +0,0 @@ -/* ------------------------------------------------------------------ - * Copyright (C) 1998-2009 PacketVideo - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either - * express or implied. - * See the License for the specific language governing permissions - * and limitations under the License. - * ------------------------------------------------------------------- - */ -/* - * Copyright (c) 2008 The Khronos Group Inc. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation the rights to use, copy, modify, merge, publish, - * distribute, sublicense, and/or sell copies of the Software, and to - * permit persons to whom the Software is furnished to do so, subject - * to the following conditions: - * The above copyright notice and this permission notice shall be included - * in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. - * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY - * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, - * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE - * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - */ - -/** OMX_Types.h - OpenMax IL version 1.1.2 - * The OMX_Types header file contains the primitive type definitions used by - * the core, the application and the component. This file may need to be - * modified to be used on systems that do not have "char" set to 8 bits, - * "short" set to 16 bits and "long" set to 32 bits. - */ - -#ifndef OMX_Types_h -#define OMX_Types_h - -#include - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/** The OMX_API and OMX_APIENTRY are platform specific definitions used - * to declare OMX function prototypes. They are modified to meet the - * requirements for a particular platform */ -#ifdef __SYMBIAN32__ -# ifdef __OMX_EXPORTS -# define OMX_API __declspec(dllexport) -# else -# ifdef _WIN32 -# define OMX_API __declspec(dllexport) -# else -# define OMX_API __declspec(dllimport) -# endif -# endif -#else -# ifdef _WIN32 -# ifdef __OMX_EXPORTS -# define OMX_API __declspec(dllexport) -# else -//# define OMX_API __declspec(dllimport) -#define OMX_API -# endif -# else -# ifdef __OMX_EXPORTS -# define OMX_API -# else -# define OMX_API extern -# endif -# endif -#endif - -#ifndef OMX_APIENTRY -#define OMX_APIENTRY -#endif - -/** OMX_IN is used to identify inputs to an OMX function. This designation - will also be used in the case of a pointer that points to a parameter - that is used as an output. */ -#ifndef OMX_IN -#define OMX_IN -#endif - -/** OMX_OUT is used to identify outputs from an OMX function. This - designation will also be used in the case of a pointer that points - to a parameter that is used as an input. */ -#ifndef OMX_OUT -#define OMX_OUT -#endif - - -/** OMX_INOUT is used to identify parameters that may be either inputs or - outputs from an OMX function at the same time. This designation will - also be used in the case of a pointer that points to a parameter that - is used both as an input and an output. */ -#ifndef OMX_INOUT -#define OMX_INOUT -#endif - -/** OMX_ALL is used to as a wildcard to select all entities of the same type - * when specifying the index, or referring to a object by an index. (i.e. - * use OMX_ALL to indicate all N channels). When used as a port index - * for a config or parameter this OMX_ALL denotes that the config or - * parameter applies to the entire component not just one port. */ -#define OMX_ALL 0xFFFFFFFF - -/** In the following we define groups that help building doxygen documentation */ - -/** @defgroup core OpenMAX IL core - * Functions and structure related to the OMX IL core - */ - - /** @defgroup comp OpenMAX IL component - * Functions and structure related to the OMX IL component - */ - -/** @defgroup rpm Resource and Policy Management - * Structures for resource and policy management of components - */ - -/** @defgroup buf Buffer Management - * Buffer handling functions and structures - */ - -/** @defgroup tun Tunneling - * @ingroup core comp - * Structures and functions to manage tunnels among component ports - */ - -/** @defgroup cp Content Pipes - * @ingroup core - */ - - /** @defgroup metadata Metadata handling - * - */ - -/** OMX_U8 is an 8 bit unsigned quantity that is byte aligned */ -typedef unsigned char OMX_U8; - -/** OMX_S8 is an 8 bit signed quantity that is byte aligned */ -typedef signed char OMX_S8; - -/** OMX_U16 is a 16 bit unsigned quantity that is 16 bit word aligned */ -typedef unsigned short OMX_U16; - -/** OMX_S16 is a 16 bit signed quantity that is 16 bit word aligned */ -typedef signed short OMX_S16; - -/** OMX_U32 is a 32 bit unsigned quantity that is 32 bit word aligned */ -typedef uint32_t OMX_U32; - -/** OMX_S32 is a 32 bit signed quantity that is 32 bit word aligned */ -typedef int32_t OMX_S32; - - -/* Users with compilers that cannot accept the "long long" designation should - define the OMX_SKIP64BIT macro. It should be noted that this may cause - some components to fail to compile if the component was written to require - 64 bit integral types. However, these components would NOT compile anyway - since the compiler does not support the way the component was written. -*/ -#ifndef OMX_SKIP64BIT -#ifdef __SYMBIAN32__ -/** OMX_U64 is a 64 bit unsigned quantity that is 64 bit word aligned */ -typedef unsigned long long OMX_U64; - -/** OMX_S64 is a 64 bit signed quantity that is 64 bit word aligned */ -typedef signed long long OMX_S64; - -#elif defined(WIN32) - -/** OMX_U64 is a 64 bit unsigned quantity that is 64 bit word aligned */ -typedef unsigned __int64 OMX_U64; - -/** OMX_S64 is a 64 bit signed quantity that is 64 bit word aligned */ -typedef signed __int64 OMX_S64; - -#else /* WIN32 */ - -/** OMX_U64 is a 64 bit unsigned quantity that is 64 bit word aligned */ -typedef unsigned long long OMX_U64; - -/** OMX_S64 is a 64 bit signed quantity that is 64 bit word aligned */ -typedef signed long long OMX_S64; - -#endif /* WIN32 */ -#endif - - -/** The OMX_BOOL type is intended to be used to represent a true or a false - value when passing parameters to and from the OMX core and components. The - OMX_BOOL is a 32 bit quantity and is aligned on a 32 bit word boundary. - */ -typedef enum OMX_BOOL { - OMX_FALSE = 0, - OMX_TRUE = !OMX_FALSE, - OMX_BOOL_MAX = 0x7FFFFFFF -} OMX_BOOL; - -/* - * Temporary Android 64 bit modification - * - * #define OMX_ANDROID_COMPILE_AS_32BIT_ON_64BIT_PLATFORMS - * overrides all OMX pointer types to be uint32_t. - * - * After this change, OMX codecs will work in 32 bit only, so 64 bit processes - * must communicate to a remote 32 bit process for OMX to work. - */ - -#ifdef OMX_ANDROID_COMPILE_AS_32BIT_ON_64BIT_PLATFORMS - -typedef uint32_t OMX_PTR; -typedef OMX_PTR OMX_STRING; -typedef OMX_PTR OMX_BYTE; - -#else /* OMX_ANDROID_COMPILE_AS_32BIT_ON_64BIT_PLATFORMS */ - -/** The OMX_PTR type is intended to be used to pass pointers between the OMX - applications and the OMX Core and components. This is a 32 bit pointer and - is aligned on a 32 bit boundary. - */ -typedef void* OMX_PTR; - -/** The OMX_STRING type is intended to be used to pass "C" type strings between - the application and the core and component. The OMX_STRING type is a 32 - bit pointer to a zero terminated string. The pointer is word aligned and - the string is byte aligned. - */ -typedef char* OMX_STRING; - -/** The OMX_BYTE type is intended to be used to pass arrays of bytes such as - buffers between the application and the component and core. The OMX_BYTE - type is a 32 bit pointer to a zero terminated string. The pointer is word - aligned and the string is byte aligned. - */ -typedef unsigned char* OMX_BYTE; - -#endif /* OMX_ANDROID_COMPILE_AS_32BIT_ON_64BIT_PLATFORMS */ - -/** OMX_UUIDTYPE is a very long unique identifier to uniquely identify - at runtime. This identifier should be generated by a component in a way - that guarantees that every instance of the identifier running on the system - is unique. */ -typedef unsigned char OMX_UUIDTYPE[128]; - -/** The OMX_DIRTYPE enumeration is used to indicate if a port is an input or - an output port. This enumeration is common across all component types. - */ -typedef enum OMX_DIRTYPE -{ - OMX_DirInput, /**< Port is an input port */ - OMX_DirOutput, /**< Port is an output port */ - OMX_DirMax = 0x7FFFFFFF -} OMX_DIRTYPE; - -/** The OMX_ENDIANTYPE enumeration is used to indicate the bit ordering - for numerical data (i.e. big endian, or little endian). - */ -typedef enum OMX_ENDIANTYPE -{ - OMX_EndianBig, /**< big endian */ - OMX_EndianLittle, /**< little endian */ - OMX_EndianMax = 0x7FFFFFFF -} OMX_ENDIANTYPE; - - -/** The OMX_NUMERICALDATATYPE enumeration is used to indicate if data - is signed or unsigned - */ -typedef enum OMX_NUMERICALDATATYPE -{ - OMX_NumericalDataSigned, /**< signed data */ - OMX_NumericalDataUnsigned, /**< unsigned data */ - OMX_NumercialDataMax = 0x7FFFFFFF -} OMX_NUMERICALDATATYPE; - - -/** Unsigned bounded value type */ -typedef struct OMX_BU32 { - OMX_U32 nValue; /**< actual value */ - OMX_U32 nMin; /**< minimum for value (i.e. nValue >= nMin) */ - OMX_U32 nMax; /**< maximum for value (i.e. nValue <= nMax) */ -} OMX_BU32; - - -/** Signed bounded value type */ -typedef struct OMX_BS32 { - OMX_S32 nValue; /**< actual value */ - OMX_S32 nMin; /**< minimum for value (i.e. nValue >= nMin) */ - OMX_S32 nMax; /**< maximum for value (i.e. nValue <= nMax) */ -} OMX_BS32; - - -/** Structure representing some time or duration in microseconds. This structure - * must be interpreted as a signed 64 bit value. The quantity is signed to accommodate - * negative deltas and preroll scenarios. The quantity is represented in microseconds - * to accomodate high resolution timestamps (e.g. DVD presentation timestamps based - * on a 90kHz clock) and to allow more accurate and synchronized delivery (e.g. - * individual audio samples delivered at 192 kHz). The quantity is 64 bit to - * accommodate a large dynamic range (signed 32 bit values would allow only for plus - * or minus 35 minutes). - * - * Implementations with limited precision may convert the signed 64 bit value to - * a signed 32 bit value internally but risk loss of precision. - */ -#ifndef OMX_SKIP64BIT -typedef OMX_S64 OMX_TICKS; -#else -typedef struct OMX_TICKS -{ - OMX_U32 nLowPart; /** low bits of the signed 64 bit tick value */ - OMX_U32 nHighPart; /** high bits of the signed 64 bit tick value */ -} OMX_TICKS; -#endif -#define OMX_TICKS_PER_SECOND 1000000 - -/** Define the public interface for the OMX Handle. The core will not use - this value internally, but the application should only use this value. - */ -typedef OMX_PTR OMX_HANDLETYPE; - -typedef struct OMX_MARKTYPE -{ - OMX_HANDLETYPE hMarkTargetComponent; /**< The component that will - generate a mark event upon - processing the mark. */ - OMX_PTR pMarkData; /**< Application specific data associated with - the mark sent on a mark event to disambiguate - this mark from others. */ -} OMX_MARKTYPE; - - -/** OMX_NATIVE_DEVICETYPE is used to map a OMX video port to the - * platform & operating specific object used to reference the display - * or can be used by a audio port for native audio rendering */ -typedef OMX_PTR OMX_NATIVE_DEVICETYPE; - -/** OMX_NATIVE_WINDOWTYPE is used to map a OMX video port to the - * platform & operating specific object used to reference the window */ -typedef OMX_PTR OMX_NATIVE_WINDOWTYPE; - -/** The OMX_VERSIONTYPE union is used to specify the version for - a structure or component. For a component, the version is entirely - specified by the component vendor. Components doing the same function - from different vendors may or may not have the same version. For - structures, the version shall be set by the entity that allocates the - structure. For structures specified in the OMX 1.1 specification, the - value of the version shall be set to 1.1.0.0 in all cases. Access to the - OMX_VERSIONTYPE can be by a single 32 bit access (e.g. by nVersion) or - by accessing one of the structure elements to, for example, check only - the Major revision. - */ -typedef union OMX_VERSIONTYPE -{ - struct - { - OMX_U8 nVersionMajor; /**< Major version accessor element */ - OMX_U8 nVersionMinor; /**< Minor version accessor element */ - OMX_U8 nRevision; /**< Revision version accessor element */ - OMX_U8 nStep; /**< Step version accessor element */ - } s; - OMX_U32 nVersion; /**< 32 bit value to make accessing the - version easily done in a single word - size copy/compare operation */ -} OMX_VERSIONTYPE; - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif -/* File EOF */ diff --git a/phonelibs/android_frameworks_native/include/media/openmax/OMX_Video.h b/phonelibs/android_frameworks_native/include/media/openmax/OMX_Video.h deleted file mode 100644 index decc410b..00000000 --- a/phonelibs/android_frameworks_native/include/media/openmax/OMX_Video.h +++ /dev/null @@ -1,1081 +0,0 @@ -/* ------------------------------------------------------------------ - * Copyright (C) 1998-2009 PacketVideo - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either - * express or implied. - * See the License for the specific language governing permissions - * and limitations under the License. - * ------------------------------------------------------------------- - */ -/** - * Copyright (c) 2008 The Khronos Group Inc. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation the rights to use, copy, modify, merge, publish, - * distribute, sublicense, and/or sell copies of the Software, and to - * permit persons to whom the Software is furnished to do so, subject - * to the following conditions: - * The above copyright notice and this permission notice shall be included - * in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. - * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY - * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, - * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE - * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - */ - -/** - * @file OMX_Video.h - OpenMax IL version 1.1.2 - * The structures is needed by Video components to exchange parameters - * and configuration data with OMX components. - */ -#ifndef OMX_Video_h -#define OMX_Video_h - -/** @defgroup video OpenMAX IL Video Domain - * @ingroup iv - * Structures for OpenMAX IL Video domain - * @{ - */ - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - - -/** - * Each OMX header must include all required header files to allow the - * header to compile without errors. The includes below are required - * for this header file to compile successfully - */ - -#include - - -/** - * Enumeration used to define the possible video compression codings. - * NOTE: This essentially refers to file extensions. If the coding is - * being used to specify the ENCODE type, then additional work - * must be done to configure the exact flavor of the compression - * to be used. For decode cases where the user application can - * not differentiate between MPEG-4 and H.264 bit streams, it is - * up to the codec to handle this. - */ -typedef enum OMX_VIDEO_CODINGTYPE { - OMX_VIDEO_CodingUnused, /**< Value when coding is N/A */ - OMX_VIDEO_CodingAutoDetect, /**< Autodetection of coding type */ - OMX_VIDEO_CodingMPEG2, /**< AKA: H.262 */ - OMX_VIDEO_CodingH263, /**< H.263 */ - OMX_VIDEO_CodingMPEG4, /**< MPEG-4 */ - OMX_VIDEO_CodingWMV, /**< all versions of Windows Media Video */ - OMX_VIDEO_CodingRV, /**< all versions of Real Video */ - OMX_VIDEO_CodingAVC, /**< H.264/AVC */ - OMX_VIDEO_CodingMJPEG, /**< Motion JPEG */ - OMX_VIDEO_CodingVP8, /**< Google VP8, formerly known as On2 VP8 */ - OMX_VIDEO_CodingVP9, /**< Google VP9 */ - OMX_VIDEO_CodingHEVC, /**< ITU H.265/HEVC */ - OMX_VIDEO_CodingKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_VIDEO_CodingVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_VIDEO_CodingMax = 0x7FFFFFFF -} OMX_VIDEO_CODINGTYPE; - - -/** - * Data structure used to define a video path. The number of Video paths for - * input and output will vary by type of the Video component. - * - * Input (aka Source) : zero Inputs, one Output, - * Splitter : one Input, 2 or more Outputs, - * Processing Element : one Input, one output, - * Mixer : 2 or more inputs, one output, - * Output (aka Sink) : one Input, zero outputs. - * - * The PortDefinition structure is used to define all of the parameters - * necessary for the compliant component to setup an input or an output video - * path. If additional vendor specific data is required, it should be - * transmitted to the component using the CustomCommand function. Compliant - * components will prepopulate this structure with optimal values during the - * GetDefaultInitParams command. - * - * STRUCT MEMBERS: - * cMIMEType : MIME type of data for the port - * pNativeRender : Platform specific reference for a display if a - * sync, otherwise this field is 0 - * nFrameWidth : Width of frame to be used on channel if - * uncompressed format is used. Use 0 for unknown, - * don't care or variable - * nFrameHeight : Height of frame to be used on channel if - * uncompressed format is used. Use 0 for unknown, - * don't care or variable - * nStride : Number of bytes per span of an image - * (i.e. indicates the number of bytes to get - * from span N to span N+1, where negative stride - * indicates the image is bottom up - * nSliceHeight : Height used when encoding in slices - * nBitrate : Bit rate of frame to be used on channel if - * compressed format is used. Use 0 for unknown, - * don't care or variable - * xFramerate : Frame rate to be used on channel if uncompressed - * format is used. Use 0 for unknown, don't care or - * variable. Units are Q16 frames per second. - * bFlagErrorConcealment : Turns on error concealment if it is supported by - * the OMX component - * eCompressionFormat : Compression format used in this instance of the - * component. When OMX_VIDEO_CodingUnused is - * specified, eColorFormat is used - * eColorFormat : Decompressed format used by this component - * pNativeWindow : Platform specific reference for a window object if a - * display sink , otherwise this field is 0x0. - */ -typedef struct OMX_VIDEO_PORTDEFINITIONTYPE { - OMX_STRING cMIMEType; - OMX_NATIVE_DEVICETYPE pNativeRender; - OMX_U32 nFrameWidth; - OMX_U32 nFrameHeight; - OMX_S32 nStride; - OMX_U32 nSliceHeight; - OMX_U32 nBitrate; - OMX_U32 xFramerate; - OMX_BOOL bFlagErrorConcealment; - OMX_VIDEO_CODINGTYPE eCompressionFormat; - OMX_COLOR_FORMATTYPE eColorFormat; - OMX_NATIVE_WINDOWTYPE pNativeWindow; -} OMX_VIDEO_PORTDEFINITIONTYPE; - -/** - * Port format parameter. This structure is used to enumerate the various - * data input/output format supported by the port. - * - * STRUCT MEMBERS: - * nSize : Size of the structure in bytes - * nVersion : OMX specification version information - * nPortIndex : Indicates which port to set - * nIndex : Indicates the enumeration index for the format from - * 0x0 to N-1 - * eCompressionFormat : Compression format used in this instance of the - * component. When OMX_VIDEO_CodingUnused is specified, - * eColorFormat is used - * eColorFormat : Decompressed format used by this component - * xFrameRate : Indicates the video frame rate in Q16 format - */ -typedef struct OMX_VIDEO_PARAM_PORTFORMATTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_U32 nIndex; - OMX_VIDEO_CODINGTYPE eCompressionFormat; - OMX_COLOR_FORMATTYPE eColorFormat; - OMX_U32 xFramerate; -} OMX_VIDEO_PARAM_PORTFORMATTYPE; - - -/** - * This is a structure for configuring video compression quantization - * parameter values. Codecs may support different QP values for different - * frame types. - * - * STRUCT MEMBERS: - * nSize : Size of the structure in bytes - * nVersion : OMX specification version info - * nPortIndex : Port that this structure applies to - * nQpI : QP value to use for index frames - * nQpP : QP value to use for P frames - * nQpB : QP values to use for bidirectional frames - */ -typedef struct OMX_VIDEO_PARAM_QUANTIZATIONTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_U32 nQpI; - OMX_U32 nQpP; - OMX_U32 nQpB; -} OMX_VIDEO_PARAM_QUANTIZATIONTYPE; - - -/** - * Structure for configuration of video fast update parameters. - * - * STRUCT MEMBERS: - * nSize : Size of the structure in bytes - * nVersion : OMX specification version info - * nPortIndex : Port that this structure applies to - * bEnableVFU : Enable/Disable video fast update - * nFirstGOB : Specifies the number of the first macroblock row - * nFirstMB : specifies the first MB relative to the specified first GOB - * nNumMBs : Specifies the number of MBs to be refreshed from nFirstGOB - * and nFirstMB - */ -typedef struct OMX_VIDEO_PARAM_VIDEOFASTUPDATETYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_BOOL bEnableVFU; - OMX_U32 nFirstGOB; - OMX_U32 nFirstMB; - OMX_U32 nNumMBs; -} OMX_VIDEO_PARAM_VIDEOFASTUPDATETYPE; - - -/** - * Enumeration of possible bitrate control types - */ -typedef enum OMX_VIDEO_CONTROLRATETYPE { - OMX_Video_ControlRateDisable, - OMX_Video_ControlRateVariable, - OMX_Video_ControlRateConstant, - OMX_Video_ControlRateVariableSkipFrames, - OMX_Video_ControlRateConstantSkipFrames, - OMX_Video_ControlRateKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_Video_ControlRateVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_Video_ControlRateMax = 0x7FFFFFFF -} OMX_VIDEO_CONTROLRATETYPE; - - -/** - * Structure for configuring bitrate mode of a codec. - * - * STRUCT MEMBERS: - * nSize : Size of the struct in bytes - * nVersion : OMX spec version info - * nPortIndex : Port that this struct applies to - * eControlRate : Control rate type enum - * nTargetBitrate : Target bitrate to encode with - */ -typedef struct OMX_VIDEO_PARAM_BITRATETYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_VIDEO_CONTROLRATETYPE eControlRate; - OMX_U32 nTargetBitrate; -} OMX_VIDEO_PARAM_BITRATETYPE; - - -/** - * Enumeration of possible motion vector (MV) types - */ -typedef enum OMX_VIDEO_MOTIONVECTORTYPE { - OMX_Video_MotionVectorPixel, - OMX_Video_MotionVectorHalfPel, - OMX_Video_MotionVectorQuarterPel, - OMX_Video_MotionVectorEighthPel, - OMX_Video_MotionVectorKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_Video_MotionVectorVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_Video_MotionVectorMax = 0x7FFFFFFF -} OMX_VIDEO_MOTIONVECTORTYPE; - - -/** - * Structure for configuring the number of motion vectors used as well - * as their accuracy. - * - * STRUCT MEMBERS: - * nSize : Size of the struct in bytes - * nVersion : OMX spec version info - * nPortIndex : port that this structure applies to - * eAccuracy : Enumerated MV accuracy - * bUnrestrictedMVs : Allow unrestricted MVs - * bFourMV : Allow use of 4 MVs - * sXSearchRange : Search range in horizontal direction for MVs - * sYSearchRange : Search range in vertical direction for MVs - */ -typedef struct OMX_VIDEO_PARAM_MOTIONVECTORTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_VIDEO_MOTIONVECTORTYPE eAccuracy; - OMX_BOOL bUnrestrictedMVs; - OMX_BOOL bFourMV; - OMX_S32 sXSearchRange; - OMX_S32 sYSearchRange; -} OMX_VIDEO_PARAM_MOTIONVECTORTYPE; - - -/** - * Enumeration of possible methods to use for Intra Refresh - */ -typedef enum OMX_VIDEO_INTRAREFRESHTYPE { - OMX_VIDEO_IntraRefreshCyclic, - OMX_VIDEO_IntraRefreshAdaptive, - OMX_VIDEO_IntraRefreshBoth, - OMX_VIDEO_IntraRefreshKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_VIDEO_IntraRefreshVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_VIDEO_IntraRefreshMax = 0x7FFFFFFF -} OMX_VIDEO_INTRAREFRESHTYPE; - - -/** - * Structure for configuring intra refresh mode - * - * STRUCT MEMBERS: - * nSize : Size of the structure in bytes - * nVersion : OMX specification version information - * nPortIndex : Port that this structure applies to - * eRefreshMode : Cyclic, Adaptive, or Both - * nAirMBs : Number of intra macroblocks to refresh in a frame when - * AIR is enabled - * nAirRef : Number of times a motion marked macroblock has to be - * intra coded - * nCirMBs : Number of consecutive macroblocks to be coded as "intra" - * when CIR is enabled - */ -typedef struct OMX_VIDEO_PARAM_INTRAREFRESHTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_VIDEO_INTRAREFRESHTYPE eRefreshMode; - OMX_U32 nAirMBs; - OMX_U32 nAirRef; - OMX_U32 nCirMBs; -} OMX_VIDEO_PARAM_INTRAREFRESHTYPE; - - -/** - * Structure for enabling various error correction methods for video - * compression. - * - * STRUCT MEMBERS: - * nSize : Size of the structure in bytes - * nVersion : OMX specification version information - * nPortIndex : Port that this structure applies to - * bEnableHEC : Enable/disable header extension codes (HEC) - * bEnableResync : Enable/disable resynchronization markers - * nResynchMarkerSpacing : Resynch markers interval (in bits) to be - * applied in the stream - * bEnableDataPartitioning : Enable/disable data partitioning - * bEnableRVLC : Enable/disable reversible variable length - * coding - */ -typedef struct OMX_VIDEO_PARAM_ERRORCORRECTIONTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_BOOL bEnableHEC; - OMX_BOOL bEnableResync; - OMX_U32 nResynchMarkerSpacing; - OMX_BOOL bEnableDataPartitioning; - OMX_BOOL bEnableRVLC; -} OMX_VIDEO_PARAM_ERRORCORRECTIONTYPE; - - -/** - * Configuration of variable block-size motion compensation (VBSMC) - * - * STRUCT MEMBERS: - * nSize : Size of the structure in bytes - * nVersion : OMX specification version information - * nPortIndex : Port that this structure applies to - * b16x16 : Enable inter block search 16x16 - * b16x8 : Enable inter block search 16x8 - * b8x16 : Enable inter block search 8x16 - * b8x8 : Enable inter block search 8x8 - * b8x4 : Enable inter block search 8x4 - * b4x8 : Enable inter block search 4x8 - * b4x4 : Enable inter block search 4x4 - */ -typedef struct OMX_VIDEO_PARAM_VBSMCTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_BOOL b16x16; - OMX_BOOL b16x8; - OMX_BOOL b8x16; - OMX_BOOL b8x8; - OMX_BOOL b8x4; - OMX_BOOL b4x8; - OMX_BOOL b4x4; -} OMX_VIDEO_PARAM_VBSMCTYPE; - - -/** - * H.263 profile types, each profile indicates support for various - * performance bounds and different annexes. - * - * ENUMS: - * Baseline : Baseline Profile: H.263 (V1), no optional modes - * H320 Coding : H.320 Coding Efficiency Backward Compatibility - * Profile: H.263+ (V2), includes annexes I, J, L.4 - * and T - * BackwardCompatible : Backward Compatibility Profile: H.263 (V1), - * includes annex F - * ISWV2 : Interactive Streaming Wireless Profile: H.263+ - * (V2), includes annexes I, J, K and T - * ISWV3 : Interactive Streaming Wireless Profile: H.263++ - * (V3), includes profile 3 and annexes V and W.6.3.8 - * HighCompression : Conversational High Compression Profile: H.263++ - * (V3), includes profiles 1 & 2 and annexes D and U - * Internet : Conversational Internet Profile: H.263++ (V3), - * includes profile 5 and annex K - * Interlace : Conversational Interlace Profile: H.263++ (V3), - * includes profile 5 and annex W.6.3.11 - * HighLatency : High Latency Profile: H.263++ (V3), includes - * profile 6 and annexes O.1 and P.5 - */ -typedef enum OMX_VIDEO_H263PROFILETYPE { - OMX_VIDEO_H263ProfileBaseline = 0x01, - OMX_VIDEO_H263ProfileH320Coding = 0x02, - OMX_VIDEO_H263ProfileBackwardCompatible = 0x04, - OMX_VIDEO_H263ProfileISWV2 = 0x08, - OMX_VIDEO_H263ProfileISWV3 = 0x10, - OMX_VIDEO_H263ProfileHighCompression = 0x20, - OMX_VIDEO_H263ProfileInternet = 0x40, - OMX_VIDEO_H263ProfileInterlace = 0x80, - OMX_VIDEO_H263ProfileHighLatency = 0x100, - OMX_VIDEO_H263ProfileKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_VIDEO_H263ProfileVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_VIDEO_H263ProfileMax = 0x7FFFFFFF -} OMX_VIDEO_H263PROFILETYPE; - - -/** - * H.263 level types, each level indicates support for various frame sizes, - * bit rates, decoder frame rates. - */ -typedef enum OMX_VIDEO_H263LEVELTYPE { - OMX_VIDEO_H263Level10 = 0x01, - OMX_VIDEO_H263Level20 = 0x02, - OMX_VIDEO_H263Level30 = 0x04, - OMX_VIDEO_H263Level40 = 0x08, - OMX_VIDEO_H263Level45 = 0x10, - OMX_VIDEO_H263Level50 = 0x20, - OMX_VIDEO_H263Level60 = 0x40, - OMX_VIDEO_H263Level70 = 0x80, - OMX_VIDEO_H263LevelKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_VIDEO_H263LevelVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_VIDEO_H263LevelMax = 0x7FFFFFFF -} OMX_VIDEO_H263LEVELTYPE; - - -/** - * Specifies the picture type. These values should be OR'd to signal all - * pictures types which are allowed. - * - * ENUMS: - * Generic Picture Types: I, P and B - * H.263 Specific Picture Types: SI and SP - * H.264 Specific Picture Types: EI and EP - * MPEG-4 Specific Picture Types: S - */ -typedef enum OMX_VIDEO_PICTURETYPE { - OMX_VIDEO_PictureTypeI = 0x01, - OMX_VIDEO_PictureTypeP = 0x02, - OMX_VIDEO_PictureTypeB = 0x04, - OMX_VIDEO_PictureTypeSI = 0x08, - OMX_VIDEO_PictureTypeSP = 0x10, - OMX_VIDEO_PictureTypeEI = 0x11, - OMX_VIDEO_PictureTypeEP = 0x12, - OMX_VIDEO_PictureTypeS = 0x14, - OMX_VIDEO_PictureTypeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_VIDEO_PictureTypeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_VIDEO_PictureTypeMax = 0x7FFFFFFF -} OMX_VIDEO_PICTURETYPE; - - -/** - * H.263 Params - * - * STRUCT MEMBERS: - * nSize : Size of the structure in bytes - * nVersion : OMX specification version information - * nPortIndex : Port that this structure applies to - * nPFrames : Number of P frames between each I frame - * nBFrames : Number of B frames between each I frame - * eProfile : H.263 profile(s) to use - * eLevel : H.263 level(s) to use - * bPLUSPTYPEAllowed : Indicating that it is allowed to use PLUSPTYPE - * (specified in the 1998 version of H.263) to - * indicate custom picture sizes or clock - * frequencies - * nAllowedPictureTypes : Specifies the picture types allowed in the - * bitstream - * bForceRoundingTypeToZero : value of the RTYPE bit (bit 6 of MPPTYPE) is - * not constrained. It is recommended to change - * the value of the RTYPE bit for each reference - * picture in error-free communication - * nPictureHeaderRepetition : Specifies the frequency of picture header - * repetition - * nGOBHeaderInterval : Specifies the interval of non-empty GOB - * headers in units of GOBs - */ -typedef struct OMX_VIDEO_PARAM_H263TYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_U32 nPFrames; - OMX_U32 nBFrames; - OMX_VIDEO_H263PROFILETYPE eProfile; - OMX_VIDEO_H263LEVELTYPE eLevel; - OMX_BOOL bPLUSPTYPEAllowed; - OMX_U32 nAllowedPictureTypes; - OMX_BOOL bForceRoundingTypeToZero; - OMX_U32 nPictureHeaderRepetition; - OMX_U32 nGOBHeaderInterval; -} OMX_VIDEO_PARAM_H263TYPE; - - -/** - * MPEG-2 profile types, each profile indicates support for various - * performance bounds and different annexes. - */ -typedef enum OMX_VIDEO_MPEG2PROFILETYPE { - OMX_VIDEO_MPEG2ProfileSimple = 0, /**< Simple Profile */ - OMX_VIDEO_MPEG2ProfileMain, /**< Main Profile */ - OMX_VIDEO_MPEG2Profile422, /**< 4:2:2 Profile */ - OMX_VIDEO_MPEG2ProfileSNR, /**< SNR Profile */ - OMX_VIDEO_MPEG2ProfileSpatial, /**< Spatial Profile */ - OMX_VIDEO_MPEG2ProfileHigh, /**< High Profile */ - OMX_VIDEO_MPEG2ProfileKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_VIDEO_MPEG2ProfileVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_VIDEO_MPEG2ProfileMax = 0x7FFFFFFF -} OMX_VIDEO_MPEG2PROFILETYPE; - - -/** - * MPEG-2 level types, each level indicates support for various frame - * sizes, bit rates, decoder frame rates. No need - */ -typedef enum OMX_VIDEO_MPEG2LEVELTYPE { - OMX_VIDEO_MPEG2LevelLL = 0, /**< Low Level */ - OMX_VIDEO_MPEG2LevelML, /**< Main Level */ - OMX_VIDEO_MPEG2LevelH14, /**< High 1440 */ - OMX_VIDEO_MPEG2LevelHL, /**< High Level */ - OMX_VIDEO_MPEG2LevelKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_VIDEO_MPEG2LevelVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_VIDEO_MPEG2LevelMax = 0x7FFFFFFF -} OMX_VIDEO_MPEG2LEVELTYPE; - - -/** - * MPEG-2 params - * - * STRUCT MEMBERS: - * nSize : Size of the structure in bytes - * nVersion : OMX specification version information - * nPortIndex : Port that this structure applies to - * nPFrames : Number of P frames between each I frame - * nBFrames : Number of B frames between each I frame - * eProfile : MPEG-2 profile(s) to use - * eLevel : MPEG-2 levels(s) to use - */ -typedef struct OMX_VIDEO_PARAM_MPEG2TYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_U32 nPFrames; - OMX_U32 nBFrames; - OMX_VIDEO_MPEG2PROFILETYPE eProfile; - OMX_VIDEO_MPEG2LEVELTYPE eLevel; -} OMX_VIDEO_PARAM_MPEG2TYPE; - - -/** - * MPEG-4 profile types, each profile indicates support for various - * performance bounds and different annexes. - * - * ENUMS: - * - Simple Profile, Levels 1-3 - * - Simple Scalable Profile, Levels 1-2 - * - Core Profile, Levels 1-2 - * - Main Profile, Levels 2-4 - * - N-bit Profile, Level 2 - * - Scalable Texture Profile, Level 1 - * - Simple Face Animation Profile, Levels 1-2 - * - Simple Face and Body Animation (FBA) Profile, Levels 1-2 - * - Basic Animated Texture Profile, Levels 1-2 - * - Hybrid Profile, Levels 1-2 - * - Advanced Real Time Simple Profiles, Levels 1-4 - * - Core Scalable Profile, Levels 1-3 - * - Advanced Coding Efficiency Profile, Levels 1-4 - * - Advanced Core Profile, Levels 1-2 - * - Advanced Scalable Texture, Levels 2-3 - */ -typedef enum OMX_VIDEO_MPEG4PROFILETYPE { - OMX_VIDEO_MPEG4ProfileSimple = 0x01, - OMX_VIDEO_MPEG4ProfileSimpleScalable = 0x02, - OMX_VIDEO_MPEG4ProfileCore = 0x04, - OMX_VIDEO_MPEG4ProfileMain = 0x08, - OMX_VIDEO_MPEG4ProfileNbit = 0x10, - OMX_VIDEO_MPEG4ProfileScalableTexture = 0x20, - OMX_VIDEO_MPEG4ProfileSimpleFace = 0x40, - OMX_VIDEO_MPEG4ProfileSimpleFBA = 0x80, - OMX_VIDEO_MPEG4ProfileBasicAnimated = 0x100, - OMX_VIDEO_MPEG4ProfileHybrid = 0x200, - OMX_VIDEO_MPEG4ProfileAdvancedRealTime = 0x400, - OMX_VIDEO_MPEG4ProfileCoreScalable = 0x800, - OMX_VIDEO_MPEG4ProfileAdvancedCoding = 0x1000, - OMX_VIDEO_MPEG4ProfileAdvancedCore = 0x2000, - OMX_VIDEO_MPEG4ProfileAdvancedScalable = 0x4000, - OMX_VIDEO_MPEG4ProfileAdvancedSimple = 0x8000, - OMX_VIDEO_MPEG4ProfileKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_VIDEO_MPEG4ProfileVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_VIDEO_MPEG4ProfileMax = 0x7FFFFFFF -} OMX_VIDEO_MPEG4PROFILETYPE; - - -/** - * MPEG-4 level types, each level indicates support for various frame - * sizes, bit rates, decoder frame rates. No need - */ -typedef enum OMX_VIDEO_MPEG4LEVELTYPE { - OMX_VIDEO_MPEG4Level0 = 0x01, /**< Level 0 */ - OMX_VIDEO_MPEG4Level0b = 0x02, /**< Level 0b */ - OMX_VIDEO_MPEG4Level1 = 0x04, /**< Level 1 */ - OMX_VIDEO_MPEG4Level2 = 0x08, /**< Level 2 */ - OMX_VIDEO_MPEG4Level3 = 0x10, /**< Level 3 */ - OMX_VIDEO_MPEG4Level4 = 0x20, /**< Level 4 */ - OMX_VIDEO_MPEG4Level4a = 0x40, /**< Level 4a */ - OMX_VIDEO_MPEG4Level5 = 0x80, /**< Level 5 */ - OMX_VIDEO_MPEG4LevelKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_VIDEO_MPEG4LevelVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_VIDEO_MPEG4LevelMax = 0x7FFFFFFF -} OMX_VIDEO_MPEG4LEVELTYPE; - - -/** - * MPEG-4 configuration. This structure handles configuration options - * which are specific to MPEG4 algorithms - * - * STRUCT MEMBERS: - * nSize : Size of the structure in bytes - * nVersion : OMX specification version information - * nPortIndex : Port that this structure applies to - * nSliceHeaderSpacing : Number of macroblocks between slice header (H263+ - * Annex K). Put zero if not used - * bSVH : Enable Short Video Header mode - * bGov : Flag to enable GOV - * nPFrames : Number of P frames between each I frame (also called - * GOV period) - * nBFrames : Number of B frames between each I frame - * nIDCVLCThreshold : Value of intra DC VLC threshold - * bACPred : Flag to use ac prediction - * nMaxPacketSize : Maximum size of packet in bytes. - * nTimeIncRes : Used to pass VOP time increment resolution for MPEG4. - * Interpreted as described in MPEG4 standard. - * eProfile : MPEG-4 profile(s) to use. - * eLevel : MPEG-4 level(s) to use. - * nAllowedPictureTypes : Specifies the picture types allowed in the bitstream - * nHeaderExtension : Specifies the number of consecutive video packet - * headers within a VOP - * bReversibleVLC : Specifies whether reversible variable length coding - * is in use - */ -typedef struct OMX_VIDEO_PARAM_MPEG4TYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_U32 nSliceHeaderSpacing; - OMX_BOOL bSVH; - OMX_BOOL bGov; - OMX_U32 nPFrames; - OMX_U32 nBFrames; - OMX_U32 nIDCVLCThreshold; - OMX_BOOL bACPred; - OMX_U32 nMaxPacketSize; - OMX_U32 nTimeIncRes; - OMX_VIDEO_MPEG4PROFILETYPE eProfile; - OMX_VIDEO_MPEG4LEVELTYPE eLevel; - OMX_U32 nAllowedPictureTypes; - OMX_U32 nHeaderExtension; - OMX_BOOL bReversibleVLC; -} OMX_VIDEO_PARAM_MPEG4TYPE; - - -/** - * WMV Versions - */ -typedef enum OMX_VIDEO_WMVFORMATTYPE { - OMX_VIDEO_WMVFormatUnused = 0x01, /**< Format unused or unknown */ - OMX_VIDEO_WMVFormat7 = 0x02, /**< Windows Media Video format 7 */ - OMX_VIDEO_WMVFormat8 = 0x04, /**< Windows Media Video format 8 */ - OMX_VIDEO_WMVFormat9 = 0x08, /**< Windows Media Video format 9 */ - OMX_VIDEO_WMFFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_VIDEO_WMFFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_VIDEO_WMVFormatMax = 0x7FFFFFFF -} OMX_VIDEO_WMVFORMATTYPE; - - -/** - * WMV Params - * - * STRUCT MEMBERS: - * nSize : Size of the structure in bytes - * nVersion : OMX specification version information - * nPortIndex : Port that this structure applies to - * eFormat : Version of WMV stream / data - */ -typedef struct OMX_VIDEO_PARAM_WMVTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_VIDEO_WMVFORMATTYPE eFormat; -} OMX_VIDEO_PARAM_WMVTYPE; - - -/** - * Real Video Version - */ -typedef enum OMX_VIDEO_RVFORMATTYPE { - OMX_VIDEO_RVFormatUnused = 0, /**< Format unused or unknown */ - OMX_VIDEO_RVFormat8, /**< Real Video format 8 */ - OMX_VIDEO_RVFormat9, /**< Real Video format 9 */ - OMX_VIDEO_RVFormatG2, /**< Real Video Format G2 */ - OMX_VIDEO_RVFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_VIDEO_RVFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_VIDEO_RVFormatMax = 0x7FFFFFFF -} OMX_VIDEO_RVFORMATTYPE; - - -/** - * Real Video Params - * - * STUCT MEMBERS: - * nSize : Size of the structure in bytes - * nVersion : OMX specification version information - * nPortIndex : Port that this structure applies to - * eFormat : Version of RV stream / data - * nBitsPerPixel : Bits per pixel coded in the frame - * nPaddedWidth : Padded width in pixel of a video frame - * nPaddedHeight : Padded Height in pixels of a video frame - * nFrameRate : Rate of video in frames per second - * nBitstreamFlags : Flags which internal information about the bitstream - * nBitstreamVersion : Bitstream version - * nMaxEncodeFrameSize: Max encoded frame size - * bEnablePostFilter : Turn on/off post filter - * bEnableTemporalInterpolation : Turn on/off temporal interpolation - * bEnableLatencyMode : When enabled, the decoder does not display a decoded - * frame until it has detected that no enhancement layer - * frames or dependent B frames will be coming. This - * detection usually occurs when a subsequent non-B - * frame is encountered - */ -typedef struct OMX_VIDEO_PARAM_RVTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_VIDEO_RVFORMATTYPE eFormat; - OMX_U16 nBitsPerPixel; - OMX_U16 nPaddedWidth; - OMX_U16 nPaddedHeight; - OMX_U32 nFrameRate; - OMX_U32 nBitstreamFlags; - OMX_U32 nBitstreamVersion; - OMX_U32 nMaxEncodeFrameSize; - OMX_BOOL bEnablePostFilter; - OMX_BOOL bEnableTemporalInterpolation; - OMX_BOOL bEnableLatencyMode; -} OMX_VIDEO_PARAM_RVTYPE; - - -/** - * AVC profile types, each profile indicates support for various - * performance bounds and different annexes. - */ -typedef enum OMX_VIDEO_AVCPROFILETYPE { - OMX_VIDEO_AVCProfileBaseline = 0x01, /**< Baseline profile */ - OMX_VIDEO_AVCProfileMain = 0x02, /**< Main profile */ - OMX_VIDEO_AVCProfileExtended = 0x04, /**< Extended profile */ - OMX_VIDEO_AVCProfileHigh = 0x08, /**< High profile */ - OMX_VIDEO_AVCProfileHigh10 = 0x10, /**< High 10 profile */ - OMX_VIDEO_AVCProfileHigh422 = 0x20, /**< High 4:2:2 profile */ - OMX_VIDEO_AVCProfileHigh444 = 0x40, /**< High 4:4:4 profile */ - OMX_VIDEO_AVCProfileKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_VIDEO_AVCProfileVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_VIDEO_AVCProfileMax = 0x7FFFFFFF -} OMX_VIDEO_AVCPROFILETYPE; - - -/** - * AVC level types, each level indicates support for various frame sizes, - * bit rates, decoder frame rates. No need - */ -typedef enum OMX_VIDEO_AVCLEVELTYPE { - OMX_VIDEO_AVCLevel1 = 0x01, /**< Level 1 */ - OMX_VIDEO_AVCLevel1b = 0x02, /**< Level 1b */ - OMX_VIDEO_AVCLevel11 = 0x04, /**< Level 1.1 */ - OMX_VIDEO_AVCLevel12 = 0x08, /**< Level 1.2 */ - OMX_VIDEO_AVCLevel13 = 0x10, /**< Level 1.3 */ - OMX_VIDEO_AVCLevel2 = 0x20, /**< Level 2 */ - OMX_VIDEO_AVCLevel21 = 0x40, /**< Level 2.1 */ - OMX_VIDEO_AVCLevel22 = 0x80, /**< Level 2.2 */ - OMX_VIDEO_AVCLevel3 = 0x100, /**< Level 3 */ - OMX_VIDEO_AVCLevel31 = 0x200, /**< Level 3.1 */ - OMX_VIDEO_AVCLevel32 = 0x400, /**< Level 3.2 */ - OMX_VIDEO_AVCLevel4 = 0x800, /**< Level 4 */ - OMX_VIDEO_AVCLevel41 = 0x1000, /**< Level 4.1 */ - OMX_VIDEO_AVCLevel42 = 0x2000, /**< Level 4.2 */ - OMX_VIDEO_AVCLevel5 = 0x4000, /**< Level 5 */ - OMX_VIDEO_AVCLevel51 = 0x8000, /**< Level 5.1 */ - OMX_VIDEO_AVCLevel52 = 0x10000, /**< Level 5.2 */ - OMX_VIDEO_AVCLevelKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_VIDEO_AVCLevelVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_VIDEO_AVCLevelMax = 0x7FFFFFFF -} OMX_VIDEO_AVCLEVELTYPE; - - -/** - * AVC loop filter modes - * - * OMX_VIDEO_AVCLoopFilterEnable : Enable - * OMX_VIDEO_AVCLoopFilterDisable : Disable - * OMX_VIDEO_AVCLoopFilterDisableSliceBoundary : Disabled on slice boundaries - */ -typedef enum OMX_VIDEO_AVCLOOPFILTERTYPE { - OMX_VIDEO_AVCLoopFilterEnable = 0, - OMX_VIDEO_AVCLoopFilterDisable, - OMX_VIDEO_AVCLoopFilterDisableSliceBoundary, - OMX_VIDEO_AVCLoopFilterKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_VIDEO_AVCLoopFilterVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_VIDEO_AVCLoopFilterMax = 0x7FFFFFFF -} OMX_VIDEO_AVCLOOPFILTERTYPE; - - -/** - * AVC params - * - * STRUCT MEMBERS: - * nSize : Size of the structure in bytes - * nVersion : OMX specification version information - * nPortIndex : Port that this structure applies to - * nSliceHeaderSpacing : Number of macroblocks between slice header, put - * zero if not used - * nPFrames : Number of P frames between each I frame - * nBFrames : Number of B frames between each I frame - * bUseHadamard : Enable/disable Hadamard transform - * nRefFrames : Max number of reference frames to use for inter - * motion search (1-16) - * nRefIdxTrailing : Pic param set ref frame index (index into ref - * frame buffer of trailing frames list), B frame - * support - * nRefIdxForward : Pic param set ref frame index (index into ref - * frame buffer of forward frames list), B frame - * support - * bEnableUEP : Enable/disable unequal error protection. This - * is only valid of data partitioning is enabled. - * bEnableFMO : Enable/disable flexible macroblock ordering - * bEnableASO : Enable/disable arbitrary slice ordering - * bEnableRS : Enable/disable sending of redundant slices - * eProfile : AVC profile(s) to use - * eLevel : AVC level(s) to use - * nAllowedPictureTypes : Specifies the picture types allowed in the - * bitstream - * bFrameMBsOnly : specifies that every coded picture of the - * coded video sequence is a coded frame - * containing only frame macroblocks - * bMBAFF : Enable/disable switching between frame and - * field macroblocks within a picture - * bEntropyCodingCABAC : Entropy decoding method to be applied for the - * syntax elements for which two descriptors appear - * in the syntax tables - * bWeightedPPrediction : Enable/disable weighted prediction shall not - * be applied to P and SP slices - * nWeightedBipredicitonMode : Default weighted prediction is applied to B - * slices - * bconstIpred : Enable/disable intra prediction - * bDirect8x8Inference : Specifies the method used in the derivation - * process for luma motion vectors for B_Skip, - * B_Direct_16x16 and B_Direct_8x8 as specified - * in subclause 8.4.1.2 of the AVC spec - * bDirectSpatialTemporal : Flag indicating spatial or temporal direct - * mode used in B slice coding (related to - * bDirect8x8Inference) . Spatial direct mode is - * more common and should be the default. - * nCabacInitIdx : Index used to init CABAC contexts - * eLoopFilterMode : Enable/disable loop filter - */ -typedef struct OMX_VIDEO_PARAM_AVCTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_U32 nSliceHeaderSpacing; - OMX_U32 nPFrames; - OMX_U32 nBFrames; - OMX_BOOL bUseHadamard; - OMX_U32 nRefFrames; - OMX_U32 nRefIdx10ActiveMinus1; - OMX_U32 nRefIdx11ActiveMinus1; - OMX_BOOL bEnableUEP; - OMX_BOOL bEnableFMO; - OMX_BOOL bEnableASO; - OMX_BOOL bEnableRS; - OMX_VIDEO_AVCPROFILETYPE eProfile; - OMX_VIDEO_AVCLEVELTYPE eLevel; - OMX_U32 nAllowedPictureTypes; - OMX_BOOL bFrameMBsOnly; - OMX_BOOL bMBAFF; - OMX_BOOL bEntropyCodingCABAC; - OMX_BOOL bWeightedPPrediction; - OMX_U32 nWeightedBipredicitonMode; - OMX_BOOL bconstIpred ; - OMX_BOOL bDirect8x8Inference; - OMX_BOOL bDirectSpatialTemporal; - OMX_U32 nCabacInitIdc; - OMX_VIDEO_AVCLOOPFILTERTYPE eLoopFilterMode; -} OMX_VIDEO_PARAM_AVCTYPE; - -typedef struct OMX_VIDEO_PARAM_PROFILELEVELTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_U32 eProfile; /**< type is OMX_VIDEO_AVCPROFILETYPE, OMX_VIDEO_H263PROFILETYPE, - or OMX_VIDEO_MPEG4PROFILETYPE depending on context */ - OMX_U32 eLevel; /**< type is OMX_VIDEO_AVCLEVELTYPE, OMX_VIDEO_H263LEVELTYPE, - or OMX_VIDEO_MPEG4PROFILETYPE depending on context */ - OMX_U32 nProfileIndex; /**< Used to query for individual profile support information, - This parameter is valid only for - OMX_IndexParamVideoProfileLevelQuerySupported index, - For all other indices this parameter is to be ignored. */ -} OMX_VIDEO_PARAM_PROFILELEVELTYPE; - -/** - * Structure for dynamically configuring bitrate mode of a codec. - * - * STRUCT MEMBERS: - * nSize : Size of the struct in bytes - * nVersion : OMX spec version info - * nPortIndex : Port that this struct applies to - * nEncodeBitrate : Target average bitrate to be generated in bps - */ -typedef struct OMX_VIDEO_CONFIG_BITRATETYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_U32 nEncodeBitrate; -} OMX_VIDEO_CONFIG_BITRATETYPE; - -/** - * Defines Encoder Frame Rate setting - * - * STRUCT MEMBERS: - * nSize : Size of the structure in bytes - * nVersion : OMX specification version information - * nPortIndex : Port that this structure applies to - * xEncodeFramerate : Encoding framerate represented in Q16 format - */ -typedef struct OMX_CONFIG_FRAMERATETYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_U32 xEncodeFramerate; /* Q16 format */ -} OMX_CONFIG_FRAMERATETYPE; - -typedef struct OMX_CONFIG_INTRAREFRESHVOPTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_BOOL IntraRefreshVOP; -} OMX_CONFIG_INTRAREFRESHVOPTYPE; - -typedef struct OMX_CONFIG_MACROBLOCKERRORMAPTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_U32 nErrMapSize; /* Size of the Error Map in bytes */ - OMX_U8 ErrMap[1]; /* Error map hint */ -} OMX_CONFIG_MACROBLOCKERRORMAPTYPE; - -typedef struct OMX_CONFIG_MBERRORREPORTINGTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_BOOL bEnabled; -} OMX_CONFIG_MBERRORREPORTINGTYPE; - -typedef struct OMX_PARAM_MACROBLOCKSTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_U32 nMacroblocks; -} OMX_PARAM_MACROBLOCKSTYPE; - -/** - * AVC Slice Mode modes - * - * OMX_VIDEO_SLICEMODE_AVCDefault : Normal frame encoding, one slice per frame - * OMX_VIDEO_SLICEMODE_AVCMBSlice : NAL mode, number of MBs per frame - * OMX_VIDEO_SLICEMODE_AVCByteSlice : NAL mode, number of bytes per frame - */ -typedef enum OMX_VIDEO_AVCSLICEMODETYPE { - OMX_VIDEO_SLICEMODE_AVCDefault = 0, - OMX_VIDEO_SLICEMODE_AVCMBSlice, - OMX_VIDEO_SLICEMODE_AVCByteSlice, - OMX_VIDEO_SLICEMODE_AVCKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ - OMX_VIDEO_SLICEMODE_AVCVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ - OMX_VIDEO_SLICEMODE_AVCLevelMax = 0x7FFFFFFF -} OMX_VIDEO_AVCSLICEMODETYPE; - -/** - * AVC FMO Slice Mode Params - * - * STRUCT MEMBERS: - * nSize : Size of the structure in bytes - * nVersion : OMX specification version information - * nPortIndex : Port that this structure applies to - * nNumSliceGroups : Specifies the number of slice groups - * nSliceGroupMapType : Specifies the type of slice groups - * eSliceMode : Specifies the type of slice - */ -typedef struct OMX_VIDEO_PARAM_AVCSLICEFMO { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_U8 nNumSliceGroups; - OMX_U8 nSliceGroupMapType; - OMX_VIDEO_AVCSLICEMODETYPE eSliceMode; -} OMX_VIDEO_PARAM_AVCSLICEFMO; - -/** - * AVC IDR Period Configs - * - * STRUCT MEMBERS: - * nSize : Size of the structure in bytes - * nVersion : OMX specification version information - * nPortIndex : Port that this structure applies to - * nIDRPeriod : Specifies periodicity of IDR frames - * nPFrames : Specifies internal of coding Intra frames - */ -typedef struct OMX_VIDEO_CONFIG_AVCINTRAPERIOD { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_U32 nIDRPeriod; - OMX_U32 nPFrames; -} OMX_VIDEO_CONFIG_AVCINTRAPERIOD; - -/** - * AVC NAL Size Configs - * - * STRUCT MEMBERS: - * nSize : Size of the structure in bytes - * nVersion : OMX specification version information - * nPortIndex : Port that this structure applies to - * nNaluBytes : Specifies the NAL unit size - */ -typedef struct OMX_VIDEO_CONFIG_NALSIZE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_U32 nNaluBytes; -} OMX_VIDEO_CONFIG_NALSIZE; - -/** @} */ - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif -/* File EOF */ - diff --git a/phonelibs/android_frameworks_native/include/media/openmax/OMX_VideoExt.h b/phonelibs/android_frameworks_native/include/media/openmax/OMX_VideoExt.h deleted file mode 100644 index 3971bc5c..00000000 --- a/phonelibs/android_frameworks_native/include/media/openmax/OMX_VideoExt.h +++ /dev/null @@ -1,224 +0,0 @@ -/* - * Copyright (c) 2010 The Khronos Group Inc. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation the rights to use, copy, modify, merge, publish, - * distribute, sublicense, and/or sell copies of the Software, and to - * permit persons to whom the Software is furnished to do so, subject - * to the following conditions: - * The above copyright notice and this permission notice shall be included - * in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. - * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY - * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, - * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE - * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - */ - -/** OMX_VideoExt.h - OpenMax IL version 1.1.2 - * The OMX_VideoExt header file contains extensions to the - * definitions used by both the application and the component to - * access video items. - */ - -#ifndef OMX_VideoExt_h -#define OMX_VideoExt_h - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/* Each OMX header shall include all required header files to allow the - * header to compile without errors. The includes below are required - * for this header file to compile successfully - */ -#include - -/** NALU Formats */ -typedef enum OMX_NALUFORMATSTYPE { - OMX_NaluFormatStartCodes = 1, - OMX_NaluFormatOneNaluPerBuffer = 2, - OMX_NaluFormatOneByteInterleaveLength = 4, - OMX_NaluFormatTwoByteInterleaveLength = 8, - OMX_NaluFormatFourByteInterleaveLength = 16, - OMX_NaluFormatCodingMax = 0x7FFFFFFF -} OMX_NALUFORMATSTYPE; - -/** NAL Stream Format */ -typedef struct OMX_NALSTREAMFORMATTYPE{ - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_NALUFORMATSTYPE eNaluFormat; -} OMX_NALSTREAMFORMATTYPE; - -/** VP8 profiles */ -typedef enum OMX_VIDEO_VP8PROFILETYPE { - OMX_VIDEO_VP8ProfileMain = 0x01, - OMX_VIDEO_VP8ProfileUnknown = 0x6EFFFFFF, - OMX_VIDEO_VP8ProfileMax = 0x7FFFFFFF -} OMX_VIDEO_VP8PROFILETYPE; - -/** VP8 levels */ -typedef enum OMX_VIDEO_VP8LEVELTYPE { - OMX_VIDEO_VP8Level_Version0 = 0x01, - OMX_VIDEO_VP8Level_Version1 = 0x02, - OMX_VIDEO_VP8Level_Version2 = 0x04, - OMX_VIDEO_VP8Level_Version3 = 0x08, - OMX_VIDEO_VP8LevelUnknown = 0x6EFFFFFF, - OMX_VIDEO_VP8LevelMax = 0x7FFFFFFF -} OMX_VIDEO_VP8LEVELTYPE; - -/** VP8 Param */ -typedef struct OMX_VIDEO_PARAM_VP8TYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_VIDEO_VP8PROFILETYPE eProfile; - OMX_VIDEO_VP8LEVELTYPE eLevel; - OMX_U32 nDCTPartitions; - OMX_BOOL bErrorResilientMode; -} OMX_VIDEO_PARAM_VP8TYPE; - -/** Structure for configuring VP8 reference frames */ -typedef struct OMX_VIDEO_VP8REFERENCEFRAMETYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_BOOL bPreviousFrameRefresh; - OMX_BOOL bGoldenFrameRefresh; - OMX_BOOL bAlternateFrameRefresh; - OMX_BOOL bUsePreviousFrame; - OMX_BOOL bUseGoldenFrame; - OMX_BOOL bUseAlternateFrame; -} OMX_VIDEO_VP8REFERENCEFRAMETYPE; - -/** Structure for querying VP8 reference frame type */ -typedef struct OMX_VIDEO_VP8REFERENCEFRAMEINFOTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_BOOL bIsIntraFrame; - OMX_BOOL bIsGoldenOrAlternateFrame; -} OMX_VIDEO_VP8REFERENCEFRAMEINFOTYPE; - -/** Maximum number of VP8 temporal layers */ -#define OMX_VIDEO_ANDROID_MAXVP8TEMPORALLAYERS 3 - -/** VP8 temporal layer patterns */ -typedef enum OMX_VIDEO_ANDROID_VPXTEMPORALLAYERPATTERNTYPE { - OMX_VIDEO_VPXTemporalLayerPatternNone = 0, - OMX_VIDEO_VPXTemporalLayerPatternWebRTC = 1, - OMX_VIDEO_VPXTemporalLayerPatternMax = 0x7FFFFFFF -} OMX_VIDEO_ANDROID_VPXTEMPORALLAYERPATTERNTYPE; - -/** - * Android specific VP8 encoder params - * - * STRUCT MEMBERS: - * nSize : Size of the structure in bytes - * nVersion : OMX specification version information - * nPortIndex : Port that this structure applies to - * nKeyFrameInterval : Key frame interval in frames - * eTemporalPattern : Type of temporal layer pattern - * nTemporalLayerCount : Number of temporal coding layers - * nTemporalLayerBitrateRatio : Bitrate ratio allocation between temporal - * streams in percentage - * nMinQuantizer : Minimum (best quality) quantizer - * nMaxQuantizer : Maximum (worst quality) quantizer - */ -typedef struct OMX_VIDEO_PARAM_ANDROID_VP8ENCODERTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_U32 nKeyFrameInterval; - OMX_VIDEO_ANDROID_VPXTEMPORALLAYERPATTERNTYPE eTemporalPattern; - OMX_U32 nTemporalLayerCount; - OMX_U32 nTemporalLayerBitrateRatio[OMX_VIDEO_ANDROID_MAXVP8TEMPORALLAYERS]; - OMX_U32 nMinQuantizer; - OMX_U32 nMaxQuantizer; -} OMX_VIDEO_PARAM_ANDROID_VP8ENCODERTYPE; - -/** HEVC Profile enum type */ -typedef enum OMX_VIDEO_HEVCPROFILETYPE { - OMX_VIDEO_HEVCProfileUnknown = 0x0, - OMX_VIDEO_HEVCProfileMain = 0x1, - OMX_VIDEO_HEVCProfileMain10 = 0x2, - OMX_VIDEO_HEVCProfileMax = 0x7FFFFFFF -} OMX_VIDEO_HEVCPROFILETYPE; - -/** HEVC Level enum type */ -typedef enum OMX_VIDEO_HEVCLEVELTYPE { - OMX_VIDEO_HEVCLevelUnknown = 0x0, - OMX_VIDEO_HEVCMainTierLevel1 = 0x1, - OMX_VIDEO_HEVCHighTierLevel1 = 0x2, - OMX_VIDEO_HEVCMainTierLevel2 = 0x4, - OMX_VIDEO_HEVCHighTierLevel2 = 0x8, - OMX_VIDEO_HEVCMainTierLevel21 = 0x10, - OMX_VIDEO_HEVCHighTierLevel21 = 0x20, - OMX_VIDEO_HEVCMainTierLevel3 = 0x40, - OMX_VIDEO_HEVCHighTierLevel3 = 0x80, - OMX_VIDEO_HEVCMainTierLevel31 = 0x100, - OMX_VIDEO_HEVCHighTierLevel31 = 0x200, - OMX_VIDEO_HEVCMainTierLevel4 = 0x400, - OMX_VIDEO_HEVCHighTierLevel4 = 0x800, - OMX_VIDEO_HEVCMainTierLevel41 = 0x1000, - OMX_VIDEO_HEVCHighTierLevel41 = 0x2000, - OMX_VIDEO_HEVCMainTierLevel5 = 0x4000, - OMX_VIDEO_HEVCHighTierLevel5 = 0x8000, - OMX_VIDEO_HEVCMainTierLevel51 = 0x10000, - OMX_VIDEO_HEVCHighTierLevel51 = 0x20000, - OMX_VIDEO_HEVCMainTierLevel52 = 0x40000, - OMX_VIDEO_HEVCHighTierLevel52 = 0x80000, - OMX_VIDEO_HEVCMainTierLevel6 = 0x100000, - OMX_VIDEO_HEVCHighTierLevel6 = 0x200000, - OMX_VIDEO_HEVCMainTierLevel61 = 0x400000, - OMX_VIDEO_HEVCHighTierLevel61 = 0x800000, - OMX_VIDEO_HEVCMainTierLevel62 = 0x1000000, - OMX_VIDEO_HEVCHighTierLevel62 = 0x2000000, - OMX_VIDEO_HEVCHighTiermax = 0x7FFFFFFF -} OMX_VIDEO_HEVCLEVELTYPE; - -/** Structure for controlling HEVC video encoding and decoding */ -typedef struct OMX_VIDEO_PARAM_HEVCTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_VIDEO_HEVCPROFILETYPE eProfile; - OMX_VIDEO_HEVCLEVELTYPE eLevel; -} OMX_VIDEO_PARAM_HEVCTYPE; - -/** Structure to define if dependent slice segments should be used */ -typedef struct OMX_VIDEO_SLICESEGMENTSTYPE { - OMX_U32 nSize; - OMX_VERSIONTYPE nVersion; - OMX_U32 nPortIndex; - OMX_BOOL bDepedentSegments; - OMX_BOOL bEnableLoopFilterAcrossSlices; -} OMX_VIDEO_SLICESEGMENTSTYPE; - -/** Structure to return timestamps of rendered output frames as well as EOS - * for tunneled components. - */ -typedef struct OMX_VIDEO_RENDEREVENTTYPE { - OMX_S64 nMediaTimeUs; // timestamp of rendered video frame - OMX_S64 nSystemTimeNs; // system monotonic time at the time frame was rendered - // Use INT64_MAX for nMediaTimeUs to signal that the EOS - // has been reached. In this case, nSystemTimeNs MUST be - // the system time when the last frame was rendered. - // This MUST be done in addition to returning (and - // following) the render information for the last frame. -} OMX_VIDEO_RENDEREVENTTYPE; - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif /* OMX_VideoExt_h */ -/* File EOF */ diff --git a/phonelibs/android_frameworks_native/include/powermanager/IPowerManager.h b/phonelibs/android_frameworks_native/include/powermanager/IPowerManager.h deleted file mode 100644 index 91ecc5aa..00000000 --- a/phonelibs/android_frameworks_native/include/powermanager/IPowerManager.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Copyright (C) 2011 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef ANDROID_IPOWERMANAGER_H -#define ANDROID_IPOWERMANAGER_H - -#include -#include -#include - -namespace android { - -// ---------------------------------------------------------------------------- - -// must be kept in sync with interface defined in IPowerManager.aidl -class IPowerManager : public IInterface -{ -public: - DECLARE_META_INTERFACE(PowerManager); - - // FIXME remove the bool isOneWay parameters as they are not oneway in the .aidl - virtual status_t acquireWakeLock(int flags, const sp& lock, const String16& tag, - const String16& packageName, bool isOneWay = false) = 0; - virtual status_t acquireWakeLockWithUid(int flags, const sp& lock, const String16& tag, - const String16& packageName, int uid, bool isOneWay = false) = 0; - virtual status_t releaseWakeLock(const sp& lock, int flags, bool isOneWay = false) = 0; - virtual status_t updateWakeLockUids(const sp& lock, int len, const int *uids, - bool isOneWay = false) = 0; - // oneway in the .aidl - virtual status_t powerHint(int hintId, int data) = 0; -}; - -// ---------------------------------------------------------------------------- - -}; // namespace android - -#endif // ANDROID_IPOWERMANAGER_H diff --git a/phonelibs/android_frameworks_native/include/powermanager/PowerManager.h b/phonelibs/android_frameworks_native/include/powermanager/PowerManager.h deleted file mode 100644 index cbddc115..00000000 --- a/phonelibs/android_frameworks_native/include/powermanager/PowerManager.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) 2011 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef ANDROID_POWERMANAGER_H -#define ANDROID_POWERMANAGER_H - -namespace android { - -// must be kept in sync with definitions in PowerManager.java -enum { - POWERMANAGER_PARTIAL_WAKE_LOCK = 1, // equals PowerManager.PARTIAL_WAKE_LOCK constant -}; - -enum { - USER_ACTIVITY_EVENT_OTHER = 0, - USER_ACTIVITY_EVENT_BUTTON = 1, - USER_ACTIVITY_EVENT_TOUCH = 2, - - USER_ACTIVITY_EVENT_LAST = USER_ACTIVITY_EVENT_TOUCH, // Last valid event code. -}; - -}; // namespace android - -#endif // ANDROID_POWERMANAGER_H diff --git a/phonelibs/android_frameworks_native/include/private/binder/Static.h b/phonelibs/android_frameworks_native/include/private/binder/Static.h deleted file mode 100644 index d1046468..00000000 --- a/phonelibs/android_frameworks_native/include/private/binder/Static.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2008 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -// All static variables go here, to control initialization and -// destruction order in the library. - -#include - -#include -#include -#include -#include -#include - -namespace android { - -// For TextStream.cpp -extern Vector gTextBuffers; - -// For ProcessState.cpp -extern Mutex gProcessMutex; -extern sp gProcess; - -// For IServiceManager.cpp -extern Mutex gDefaultServiceManagerLock; -extern sp gDefaultServiceManager; -extern sp gPermissionController; - -} // namespace android diff --git a/phonelibs/android_frameworks_native/include/private/binder/binder_module.h b/phonelibs/android_frameworks_native/include/private/binder/binder_module.h deleted file mode 100644 index a8dd64f2..00000000 --- a/phonelibs/android_frameworks_native/include/private/binder/binder_module.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright (C) 2008 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef _BINDER_MODULE_H_ -#define _BINDER_MODULE_H_ - -#ifdef __cplusplus -namespace android { -#endif - -/* obtain structures and constants from the kernel header */ - -#include -#include - -#ifdef __cplusplus -} // namespace android -#endif - -#endif // _BINDER_MODULE_H_ diff --git a/phonelibs/android_frameworks_native/include/private/gui/ComposerService.h b/phonelibs/android_frameworks_native/include/private/gui/ComposerService.h deleted file mode 100644 index ff2f9bf0..00000000 --- a/phonelibs/android_frameworks_native/include/private/gui/ComposerService.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Copyright (C) 2011 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef ANDROID_PRIVATE_GUI_COMPOSER_SERVICE_H -#define ANDROID_PRIVATE_GUI_COMPOSER_SERVICE_H - -#include -#include - -#include -#include - - -namespace android { - -// --------------------------------------------------------------------------- - -class IMemoryHeap; -class ISurfaceComposer; - -// --------------------------------------------------------------------------- - -// This holds our connection to the composer service (i.e. SurfaceFlinger). -// If the remote side goes away, we will re-establish the connection. -// Users of this class should not retain the value from -// getComposerService() for an extended period. -// -// (It's not clear that using Singleton is useful here anymore.) -class ComposerService : public Singleton -{ - sp mComposerService; - sp mDeathObserver; - Mutex mLock; - - ComposerService(); - void connectLocked(); - void composerServiceDied(); - friend class Singleton; -public: - - // Get a connection to the Composer Service. This will block until - // a connection is established. - static sp getComposerService(); -}; - -// --------------------------------------------------------------------------- -}; // namespace android - -#endif // ANDROID_PRIVATE_GUI_COMPOSER_SERVICE_H diff --git a/phonelibs/android_frameworks_native/include/private/gui/LayerState.h b/phonelibs/android_frameworks_native/include/private/gui/LayerState.h deleted file mode 100644 index 9ff84099..00000000 --- a/phonelibs/android_frameworks_native/include/private/gui/LayerState.h +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Copyright (C) 2008 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef ANDROID_SF_LAYER_STATE_H -#define ANDROID_SF_LAYER_STATE_H - -#include -#include - -#include - -#include -#include - -namespace android { - -class Parcel; -class ISurfaceComposerClient; - -/* - * Used to communicate layer information between SurfaceFlinger and its clients. - */ -struct layer_state_t { - - - enum { - eLayerHidden = 0x01, // SURFACE_HIDDEN in SurfaceControl.java - eLayerOpaque = 0x02, // SURFACE_OPAQUE - eLayerSecure = 0x80, // SECURE - }; - - enum { - ePositionChanged = 0x00000001, - eLayerChanged = 0x00000002, - eSizeChanged = 0x00000004, - eAlphaChanged = 0x00000008, - eMatrixChanged = 0x00000010, - eTransparentRegionChanged = 0x00000020, - eFlagsChanged = 0x00000040, - eLayerStackChanged = 0x00000080, - eCropChanged = 0x00000100, - eBlurChanged = 0x00400000, - eBlurMaskSurfaceChanged = 0x00800000, - eBlurMaskSamplingChanged = 0x01000000, - eBlurMaskAlphaThresholdChanged = 0x02000000, - }; - - layer_state_t() - : what(0), - x(0), y(0), z(0), w(0), h(0), layerStack(0), blur(0), - blurMaskSampling(0), blurMaskAlphaThreshold(0), alpha(0), flags(0), mask(0), - reserved(0) - { - matrix.dsdx = matrix.dtdy = 1.0f; - matrix.dsdy = matrix.dtdx = 0.0f; - crop.makeInvalid(); - } - - status_t write(Parcel& output) const; - status_t read(const Parcel& input); - - struct matrix22_t { - float dsdx; - float dtdx; - float dsdy; - float dtdy; - }; - sp surface; - uint32_t what; - float x; - float y; - uint32_t z; - uint32_t w; - uint32_t h; - uint32_t layerStack; - float blur; - sp blurMaskSurface; - uint32_t blurMaskSampling; - float blurMaskAlphaThreshold; - float alpha; - uint8_t flags; - uint8_t mask; - uint8_t reserved; - matrix22_t matrix; - Rect crop; - // non POD must be last. see write/read - Region transparentRegion; -}; - -struct ComposerState { - sp client; - layer_state_t state; - status_t write(Parcel& output) const; - status_t read(const Parcel& input); -}; - -struct DisplayState { - - enum { - eOrientationDefault = 0, - eOrientation90 = 1, - eOrientation180 = 2, - eOrientation270 = 3, - eOrientationUnchanged = 4, - eOrientationSwapMask = 0x01 - }; - - enum { - eSurfaceChanged = 0x01, - eLayerStackChanged = 0x02, - eDisplayProjectionChanged = 0x04, - eDisplaySizeChanged = 0x08 - }; - - uint32_t what; - sp token; - sp surface; - uint32_t layerStack; - uint32_t orientation; - Rect viewport; - Rect frame; - uint32_t width, height; - status_t write(Parcel& output) const; - status_t read(const Parcel& input); -}; - -}; // namespace android - -#endif // ANDROID_SF_LAYER_STATE_H - diff --git a/phonelibs/android_frameworks_native/include/private/gui/SyncFeatures.h b/phonelibs/android_frameworks_native/include/private/gui/SyncFeatures.h deleted file mode 100644 index 79fb75bc..00000000 --- a/phonelibs/android_frameworks_native/include/private/gui/SyncFeatures.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * Copyright (C) 2013 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef ANDROID_GUI_SYNC_FEATURES_H -#define ANDROID_GUI_SYNC_FEATURES_H - -#include -#include - - -namespace android { -// ---------------------------------------------------------------------------- - -class SyncFeatures : public Singleton { - friend class Singleton; - bool mHasNativeFenceSync; - bool mHasFenceSync; - bool mHasWaitSync; - String8 mString; - SyncFeatures(); - -public: - bool useNativeFenceSync() const; - bool useFenceSync() const; - bool useWaitSync() const; - String8 toString() const; -}; - -// ---------------------------------------------------------------------------- -}; // namespace android - -#endif // ANDROID_GUI_SYNC_FEATURES_H diff --git a/phonelibs/android_frameworks_native/include/private/ui/RegionHelper.h b/phonelibs/android_frameworks_native/include/private/ui/RegionHelper.h deleted file mode 100644 index 8c190dd4..00000000 --- a/phonelibs/android_frameworks_native/include/private/ui/RegionHelper.h +++ /dev/null @@ -1,301 +0,0 @@ -/* - * Copyright (C) 2009 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef ANDROID_UI_PRIVATE_REGION_HELPER_H -#define ANDROID_UI_PRIVATE_REGION_HELPER_H - -#include -#include - -namespace android { -// ---------------------------------------------------------------------------- - -template -class region_operator -{ -public: - typedef typename RECT::value_type TYPE; - static const TYPE max_value = 0x7FFFFFF; - - /* - * Common boolean operations: - * value is computed as 0b101 op 0b110 - * other boolean operation are possible, simply compute - * their corresponding value with the above formulae and use - * it when instantiating a region_operator. - */ - static const uint32_t LHS = 0x5; // 0b101 - static const uint32_t RHS = 0x6; // 0b110 - enum { - op_nand = LHS & ~RHS, - op_and = LHS & RHS, - op_or = LHS | RHS, - op_xor = LHS ^ RHS - }; - - struct region { - RECT const* rects; - size_t count; - TYPE dx; - TYPE dy; - inline region(const region& rhs) - : rects(rhs.rects), count(rhs.count), dx(rhs.dx), dy(rhs.dy) { } - inline region(RECT const* r, size_t c) - : rects(r), count(c), dx(), dy() { } - inline region(RECT const* r, size_t c, TYPE dx, TYPE dy) - : rects(r), count(c), dx(dx), dy(dy) { } - }; - - class region_rasterizer { - friend class region_operator; - virtual void operator()(const RECT& rect) = 0; - public: - virtual ~region_rasterizer() { }; - }; - - inline region_operator(int op, const region& lhs, const region& rhs) - : op_mask(op), spanner(lhs, rhs) - { - } - - void operator()(region_rasterizer& rasterizer) { - RECT current; - do { - SpannerInner spannerInner(spanner.lhs, spanner.rhs); - int inside = spanner.next(current.top, current.bottom); - spannerInner.prepare(inside); - do { - TYPE left, right; - int inside = spannerInner.next(current.left, current.right); - if ((op_mask >> inside) & 1) { - if (current.left < current.right && - current.top < current.bottom) { - rasterizer(current); - } - } - } while(!spannerInner.isDone()); - } while(!spanner.isDone()); - } - -private: - uint32_t op_mask; - - class SpannerBase - { - public: - SpannerBase() - : lhs_head(max_value), lhs_tail(max_value), - rhs_head(max_value), rhs_tail(max_value) { - } - - enum { - lhs_before_rhs = 0, - lhs_after_rhs = 1, - lhs_coincide_rhs = 2 - }; - - protected: - TYPE lhs_head; - TYPE lhs_tail; - TYPE rhs_head; - TYPE rhs_tail; - - inline int next(TYPE& head, TYPE& tail, - bool& more_lhs, bool& more_rhs) - { - int inside; - more_lhs = false; - more_rhs = false; - if (lhs_head < rhs_head) { - inside = lhs_before_rhs; - head = lhs_head; - if (lhs_tail <= rhs_head) { - tail = lhs_tail; - more_lhs = true; - } else { - lhs_head = rhs_head; - tail = rhs_head; - } - } else if (rhs_head < lhs_head) { - inside = lhs_after_rhs; - head = rhs_head; - if (rhs_tail <= lhs_head) { - tail = rhs_tail; - more_rhs = true; - } else { - rhs_head = lhs_head; - tail = lhs_head; - } - } else { - inside = lhs_coincide_rhs; - head = lhs_head; - if (lhs_tail <= rhs_tail) { - tail = rhs_head = lhs_tail; - more_lhs = true; - } - if (rhs_tail <= lhs_tail) { - tail = lhs_head = rhs_tail; - more_rhs = true; - } - } - return inside; - } - }; - - class Spanner : protected SpannerBase - { - friend class region_operator; - region lhs; - region rhs; - - public: - inline Spanner(const region& lhs, const region& rhs) - : lhs(lhs), rhs(rhs) - { - if (lhs.count) { - SpannerBase::lhs_head = lhs.rects->top + lhs.dy; - SpannerBase::lhs_tail = lhs.rects->bottom + lhs.dy; - } - if (rhs.count) { - SpannerBase::rhs_head = rhs.rects->top + rhs.dy; - SpannerBase::rhs_tail = rhs.rects->bottom + rhs.dy; - } - } - - inline bool isDone() const { - return !rhs.count && !lhs.count; - } - - inline int next(TYPE& top, TYPE& bottom) - { - bool more_lhs = false; - bool more_rhs = false; - int inside = SpannerBase::next(top, bottom, more_lhs, more_rhs); - if (more_lhs) { - advance(lhs, SpannerBase::lhs_head, SpannerBase::lhs_tail); - } - if (more_rhs) { - advance(rhs, SpannerBase::rhs_head, SpannerBase::rhs_tail); - } - return inside; - } - - private: - static inline - void advance(region& reg, TYPE& aTop, TYPE& aBottom) { - // got to next span - size_t count = reg.count; - RECT const * rects = reg.rects; - RECT const * const end = rects + count; - const int top = rects->top; - while (rects != end && rects->top == top) { - rects++; - count--; - } - if (rects != end) { - aTop = rects->top + reg.dy; - aBottom = rects->bottom + reg.dy; - } else { - aTop = max_value; - aBottom = max_value; - } - reg.rects = rects; - reg.count = count; - } - }; - - class SpannerInner : protected SpannerBase - { - region lhs; - region rhs; - - public: - inline SpannerInner(const region& lhs, const region& rhs) - : lhs(lhs), rhs(rhs) - { - } - - inline void prepare(int inside) { - if (inside == SpannerBase::lhs_before_rhs) { - if (lhs.count) { - SpannerBase::lhs_head = lhs.rects->left + lhs.dx; - SpannerBase::lhs_tail = lhs.rects->right + lhs.dx; - } - SpannerBase::rhs_head = max_value; - SpannerBase::rhs_tail = max_value; - } else if (inside == SpannerBase::lhs_after_rhs) { - SpannerBase::lhs_head = max_value; - SpannerBase::lhs_tail = max_value; - if (rhs.count) { - SpannerBase::rhs_head = rhs.rects->left + rhs.dx; - SpannerBase::rhs_tail = rhs.rects->right + rhs.dx; - } - } else { - if (lhs.count) { - SpannerBase::lhs_head = lhs.rects->left + lhs.dx; - SpannerBase::lhs_tail = lhs.rects->right + lhs.dx; - } - if (rhs.count) { - SpannerBase::rhs_head = rhs.rects->left + rhs.dx; - SpannerBase::rhs_tail = rhs.rects->right + rhs.dx; - } - } - } - - inline bool isDone() const { - return SpannerBase::lhs_head == max_value && - SpannerBase::rhs_head == max_value; - } - - inline int next(TYPE& left, TYPE& right) - { - bool more_lhs = false; - bool more_rhs = false; - int inside = SpannerBase::next(left, right, more_lhs, more_rhs); - if (more_lhs) { - advance(lhs, SpannerBase::lhs_head, SpannerBase::lhs_tail); - } - if (more_rhs) { - advance(rhs, SpannerBase::rhs_head, SpannerBase::rhs_tail); - } - return inside; - } - - private: - static inline - void advance(region& reg, TYPE& left, TYPE& right) { - if (reg.rects && reg.count) { - const int cur_span_top = reg.rects->top; - reg.rects++; - reg.count--; - if (!reg.count || reg.rects->top != cur_span_top) { - left = max_value; - right = max_value; - } else { - left = reg.rects->left + reg.dx; - right = reg.rects->right + reg.dx; - } - } - } - }; - - Spanner spanner; -}; - -// ---------------------------------------------------------------------------- -}; - -#endif /* ANDROID_UI_PRIVATE_REGION_HELPER_H */