#!/usr/bin/env python3.7
import os
import json
import copy
import datetime
import psutil
from smbus2 import SMBus
from cereal import log
from common.android import ANDROID, get_network_type, get_network_strength
from common.basedir import BASEDIR
from common.params import Params, put_nonblocking
from common.realtime import sec_since_boot, DT_TRML
from common.numpy_fast import clip, interp
from common.filter_simple import FirstOrderFilter
from selfdrive.version import terms_version, training_version
from selfdrive.swaglog import cloudlog
import cereal.messaging as messaging
from selfdrive.loggerd.config import get_available_percent
from selfdrive.pandad import get_expected_signature
from selfdrive.thermald.power_monitoring import PowerMonitoring, get_battery_capacity, get_battery_status, get_battery_current, get_battery_voltage, get_usb_present

FW_SIGNATURE = get_expected_signature()

ThermalStatus = log.ThermalData.ThermalStatus
NetworkType = log.ThermalData.NetworkType
NetworkStrength = log.ThermalData.NetworkStrength
CURRENT_TAU = 15.   # 15s time constant
CPU_TEMP_TAU = 5.   # 5s time constant
DAYS_NO_CONNECTIVITY_MAX = 7  # do not allow to engage after a week without internet
DAYS_NO_CONNECTIVITY_PROMPT = 4  # send an offroad prompt after 4 days with no internet

LEON = False
last_eon_fan_val = None


with open(BASEDIR + "/selfdrive/controls/lib/alerts_offroad.json") as json_file:
  OFFROAD_ALERTS = json.load(json_file)


def read_tz(x, clip=True):
  if not ANDROID:
    # we don't monitor thermal on PC
    return 0
  try:
    with open("/sys/devices/virtual/thermal/thermal_zone%d/temp" % x) as f:
      ret = int(f.read())
      if clip:
        ret = max(0, ret)
  except FileNotFoundError:
    return 0

  return ret


def read_thermal():
  dat = messaging.new_message('thermal')
  dat.thermal.cpu0 = read_tz(5)
  dat.thermal.cpu1 = read_tz(7)
  dat.thermal.cpu2 = read_tz(10)
  dat.thermal.cpu3 = read_tz(12)
  dat.thermal.mem = read_tz(2)
  dat.thermal.gpu = read_tz(16)
  dat.thermal.bat = read_tz(29)
  dat.thermal.pa0 = read_tz(25)
  return dat


def setup_eon_fan():
  global LEON

  os.system("echo 2 > /sys/module/dwc3_msm/parameters/otg_switch")

  bus = SMBus(7, force=True)
  try:
    bus.write_byte_data(0x21, 0x10, 0xf)   # mask all interrupts
    bus.write_byte_data(0x21, 0x03, 0x1)   # set drive current and global interrupt disable
    bus.write_byte_data(0x21, 0x02, 0x2)   # needed?
    bus.write_byte_data(0x21, 0x04, 0x4)   # manual override source
  except IOError:
    print("LEON detected")
    LEON = True
  bus.close()


def set_eon_fan(val):
  global LEON, last_eon_fan_val

  if last_eon_fan_val is None or last_eon_fan_val != val:
    bus = SMBus(7, force=True)
    if LEON:
      try:
        i = [0x1, 0x3 | 0, 0x3 | 0x08, 0x3 | 0x10][val]
        bus.write_i2c_block_data(0x3d, 0, [i])
      except IOError:
        # tusb320
        if val == 0:
          bus.write_i2c_block_data(0x67, 0xa, [0])
          #bus.write_i2c_block_data(0x67, 0x45, [1<<2])
        else:
          #bus.write_i2c_block_data(0x67, 0x45, [0])
          bus.write_i2c_block_data(0x67, 0xa, [0x20])
          bus.write_i2c_block_data(0x67, 0x8, [(val-1)<<6])
    else:
      bus.write_byte_data(0x21, 0x04, 0x2)
      bus.write_byte_data(0x21, 0x03, (val*2)+1)
      bus.write_byte_data(0x21, 0x04, 0x4)
    bus.close()
    last_eon_fan_val = val


# temp thresholds to control fan speed - high hysteresis
_TEMP_THRS_H = [50., 65., 80., 10000]
# temp thresholds to control fan speed - low hysteresis
_TEMP_THRS_L = [42.5, 57.5, 72.5, 10000]
# fan speed options
_FAN_SPEEDS = [0, 16384, 32768, 65535]
# max fan speed only allowed if battery is hot
_BAT_TEMP_THERSHOLD = 45.


def handle_fan_eon(max_cpu_temp, bat_temp, fan_speed, ignition):
  new_speed_h = next(speed for speed, temp_h in zip(_FAN_SPEEDS, _TEMP_THRS_H) if temp_h > max_cpu_temp)
  new_speed_l = next(speed for speed, temp_l in zip(_FAN_SPEEDS, _TEMP_THRS_L) if temp_l > max_cpu_temp)

  if new_speed_h > fan_speed:
    # update speed if using the high thresholds results in fan speed increment
    fan_speed = new_speed_h
  elif new_speed_l < fan_speed:
    # update speed if using the low thresholds results in fan speed decrement
    fan_speed = new_speed_l

  if bat_temp < _BAT_TEMP_THERSHOLD:
    # no max fan speed unless battery is hot
    fan_speed = min(fan_speed, _FAN_SPEEDS[-2])

  set_eon_fan(fan_speed // 16384)

  return fan_speed


def handle_fan_uno(max_cpu_temp, bat_temp, fan_speed, ignition):
  new_speed = int(interp(max_cpu_temp, [40.0, 80.0], [0, 80]))

  if not ignition:
    new_speed = min(30, new_speed)

  return new_speed


def thermald_thread():
  # prevent LEECO from undervoltage
  BATT_PERC_OFF = 10 if LEON else 3

  health_timeout = int(1000 * 2.5 * DT_TRML)  # 2.5x the expected health frequency

  # now loop
  thermal_sock = messaging.pub_sock('thermal')
  health_sock = messaging.sub_sock('health', timeout=health_timeout)
  location_sock = messaging.sub_sock('gpsLocation')

  ignition = False
  fan_speed = 0
  count = 0

  off_ts = None
  started_ts = None
  started_seen = False
  thermal_status = ThermalStatus.green
  thermal_status_prev = ThermalStatus.green
  usb_power = True
  usb_power_prev = True

  network_type = NetworkType.none
  network_strength = NetworkStrength.unknown

  current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
  cpu_temp_filter = FirstOrderFilter(0., CPU_TEMP_TAU, DT_TRML)
  health_prev = None
  fw_version_match_prev = True
  current_connectivity_alert = None
  time_valid_prev = True
  should_start_prev = False

  is_uno = (read_tz(29, clip=False) < -1000)
  if is_uno or not ANDROID:
    handle_fan = handle_fan_uno
  else:
    setup_eon_fan()
    handle_fan = handle_fan_eon

  params = Params()
  pm = PowerMonitoring(is_uno)

  while 1:
    health = messaging.recv_sock(health_sock, wait=True)
    location = messaging.recv_sock(location_sock)
    location = location.gpsLocation if location else None
    msg = read_thermal()

    # clear car params when panda gets disconnected
    if health is None and health_prev is not None:
      params.panda_disconnect()
    health_prev = health

    if health is not None:
      usb_power = health.health.usbPowerMode != log.HealthData.UsbPowerMode.client

    # get_network_type is an expensive call. update every 10s
    if (count % int(10. / DT_TRML)) == 0:
      try:
        network_type = get_network_type()
        network_strength = get_network_strength(network_type)
      except Exception:
        cloudlog.exception("Error getting network status")

    msg.thermal.freeSpace = get_available_percent(default=100.0) / 100.0
    msg.thermal.memUsedPercent = int(round(psutil.virtual_memory().percent))
    msg.thermal.cpuPerc = int(round(psutil.cpu_percent()))
    msg.thermal.networkType = network_type
    msg.thermal.networkStrength = network_strength
    msg.thermal.batteryPercent = get_battery_capacity()
    msg.thermal.batteryStatus = get_battery_status()
    msg.thermal.batteryCurrent = get_battery_current()
    msg.thermal.batteryVoltage = get_battery_voltage()
    msg.thermal.usbOnline = get_usb_present()

    # Fake battery levels on uno for frame
    if is_uno:
      msg.thermal.batteryPercent = 100
      msg.thermal.batteryStatus = "Charging"

    current_filter.update(msg.thermal.batteryCurrent / 1e6)

    # TODO: add car battery voltage check
    max_cpu_temp = cpu_temp_filter.update(
      max(msg.thermal.cpu0,
          msg.thermal.cpu1,
          msg.thermal.cpu2,
          msg.thermal.cpu3) / 10.0)

    max_comp_temp = max(max_cpu_temp, msg.thermal.mem / 10., msg.thermal.gpu / 10.)
    bat_temp = msg.thermal.bat / 1000.

    fan_speed = handle_fan(max_cpu_temp, bat_temp, fan_speed, ignition)
    msg.thermal.fanSpeed = fan_speed

    # thermal logic with hysterisis
    if max_cpu_temp > 107. or bat_temp >= 63.:
      # onroad not allowed
      thermal_status = ThermalStatus.danger
    elif max_comp_temp > 92.5 or bat_temp > 60.:  # CPU throttling starts around ~90C
      # hysteresis between onroad not allowed and engage not allowed
      thermal_status = clip(thermal_status, ThermalStatus.red, ThermalStatus.danger)
    elif max_cpu_temp > 87.5:
      # hysteresis between engage not allowed and uploader not allowed
      thermal_status = clip(thermal_status, ThermalStatus.yellow, ThermalStatus.red)
    elif max_cpu_temp > 80.0:
      # uploader not allowed
      thermal_status = ThermalStatus.yellow
    elif max_cpu_temp > 75.0:
      # hysteresis between uploader not allowed and all good
      thermal_status = clip(thermal_status, ThermalStatus.green, ThermalStatus.yellow)
    else:
      # all good
      thermal_status = ThermalStatus.green

    # **** starting logic ****

    # Check for last update time and display alerts if needed
    now = datetime.datetime.utcnow()

    # show invalid date/time alert
    time_valid = now.year >= 2019
    if time_valid and not time_valid_prev:
      params.delete("Offroad_InvalidTime")
    if not time_valid and time_valid_prev:
      put_nonblocking("Offroad_InvalidTime", json.dumps(OFFROAD_ALERTS["Offroad_InvalidTime"]))
    time_valid_prev = time_valid

    # Show update prompt
    try:
      last_update = datetime.datetime.fromisoformat(params.get("LastUpdateTime", encoding='utf8'))
    except (TypeError, ValueError):
      last_update = now
    dt = now - last_update

    update_failed_count = params.get("UpdateFailedCount")
    update_failed_count = 0 if update_failed_count is None else int(update_failed_count)

    if dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1:
      if current_connectivity_alert != "expired":
        current_connectivity_alert = "expired"
        params.delete("Offroad_ConnectivityNeededPrompt")
        put_nonblocking("Offroad_ConnectivityNeeded", json.dumps(OFFROAD_ALERTS["Offroad_ConnectivityNeeded"]))
    elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
      remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0))
      if current_connectivity_alert != "prompt" + remaining_time:
        current_connectivity_alert = "prompt" + remaining_time
        alert_connectivity_prompt = copy.copy(OFFROAD_ALERTS["Offroad_ConnectivityNeededPrompt"])
        alert_connectivity_prompt["text"] += remaining_time + " days."
        params.delete("Offroad_ConnectivityNeeded")
        put_nonblocking("Offroad_ConnectivityNeededPrompt", json.dumps(alert_connectivity_prompt))
    elif current_connectivity_alert is not None:
      current_connectivity_alert = None
      params.delete("Offroad_ConnectivityNeeded")
      params.delete("Offroad_ConnectivityNeededPrompt")

    # start constellation of processes when the car starts
    ignition = health is not None and (health.health.ignitionLine or health.health.ignitionCan)

    do_uninstall = params.get("DoUninstall") == b"1"
    accepted_terms = params.get("HasAcceptedTerms") == terms_version
    completed_training = params.get("CompletedTrainingVersion") == training_version

    panda_signature = params.get("PandaFirmware")
    fw_version_match = (panda_signature is None) or (panda_signature == FW_SIGNATURE)   # don't show alert is no panda is connected (None)

    should_start = ignition

    # with 2% left, we killall, otherwise the phone will take a long time to boot
    should_start = should_start and msg.thermal.freeSpace > 0.02

    # confirm we have completed training and aren't uninstalling
    should_start = should_start and accepted_terms and completed_training and (not do_uninstall)

    # check for firmware mismatch
    should_start = should_start and fw_version_match

    # check if system time is valid
    should_start = should_start and time_valid

    # don't start while taking snapshot
    if not should_start_prev:
      is_taking_snapshot = params.get("IsTakingSnapshot") == b"1"
      should_start = should_start and (not is_taking_snapshot)

    if fw_version_match and not fw_version_match_prev:
      params.delete("Offroad_PandaFirmwareMismatch")
    if not fw_version_match and fw_version_match_prev:
      put_nonblocking("Offroad_PandaFirmwareMismatch", json.dumps(OFFROAD_ALERTS["Offroad_PandaFirmwareMismatch"]))

    # if any CPU gets above 107 or the battery gets above 63, kill all processes
    # controls will warn with CPU above 95 or battery above 60
    if thermal_status >= ThermalStatus.danger:
      should_start = False
      if thermal_status_prev < ThermalStatus.danger:
        put_nonblocking("Offroad_TemperatureTooHigh", json.dumps(OFFROAD_ALERTS["Offroad_TemperatureTooHigh"]))
    else:
      if thermal_status_prev >= ThermalStatus.danger:
        params.delete("Offroad_TemperatureTooHigh")

    if should_start:
      if not should_start_prev:
        params.delete("IsOffroad")

      off_ts = None
      if started_ts is None:
        started_ts = sec_since_boot()
        started_seen = True
        os.system('echo performance > /sys/class/devfreq/soc:qcom,cpubw/governor')
    else:
      if should_start_prev or (count == 0):
        put_nonblocking("IsOffroad", "1")

      started_ts = None
      if off_ts is None:
        off_ts = sec_since_boot()
        os.system('echo powersave > /sys/class/devfreq/soc:qcom,cpubw/governor')

      # shutdown if the battery gets lower than 3%, it's discharging, we aren't running for
      # more than a minute but we were running
      if msg.thermal.batteryPercent < BATT_PERC_OFF and msg.thermal.batteryStatus == "Discharging" and \
         started_seen and (sec_since_boot() - off_ts) > 60:
        os.system('LD_LIBRARY_PATH="" svc power shutdown')

    # Offroad power monitoring
    pm.calculate(health)
    msg.thermal.offroadPowerUsage = pm.get_power_used()

    msg.thermal.chargingError = current_filter.x > 0. and msg.thermal.batteryPercent < 90  # if current is positive, then battery is being discharged
    msg.thermal.started = started_ts is not None
    msg.thermal.startedTs = int(1e9*(started_ts or 0))

    msg.thermal.thermalStatus = thermal_status
    thermal_sock.send(msg.to_bytes())

    if usb_power_prev and not usb_power:
      put_nonblocking("Offroad_ChargeDisabled", json.dumps(OFFROAD_ALERTS["Offroad_ChargeDisabled"]))
    elif usb_power and not usb_power_prev:
      params.delete("Offroad_ChargeDisabled")

    thermal_status_prev = thermal_status
    usb_power_prev = usb_power
    fw_version_match_prev = fw_version_match
    should_start_prev = should_start

    # report to server once per minute
    if (count % int(60. / DT_TRML)) == 0:
      cloudlog.event("STATUS_PACKET",
                     count=count,
                     health=(health.to_dict() if health else None),
                     location=(location.to_dict() if location else None),
                     thermal=msg.to_dict())

    count += 1


def main():
  thermald_thread()


if __name__ == "__main__":
  main()