panda/board/drivers/clock.h

41 lines
1.0 KiB
C

void clock_init(void) {
// enable external oscillator
RCC->CR |= RCC_CR_HSEON;
while ((RCC->CR & RCC_CR_HSERDY) == 0);
// divide things
RCC->CFGR = RCC_CFGR_HPRE_DIV1 | RCC_CFGR_PPRE2_DIV2 | RCC_CFGR_PPRE1_DIV4;
// 16mhz crystal
RCC->PLLCFGR = RCC_PLLCFGR_PLLQ_2 | RCC_PLLCFGR_PLLM_3 |
RCC_PLLCFGR_PLLN_6 | RCC_PLLCFGR_PLLN_5 | RCC_PLLCFGR_PLLSRC_HSE;
// start PLL
RCC->CR |= RCC_CR_PLLON;
while ((RCC->CR & RCC_CR_PLLRDY) == 0);
// Configure Flash prefetch, Instruction cache, Data cache and wait state
// *** without this, it breaks ***
FLASH->ACR = FLASH_ACR_ICEN | FLASH_ACR_DCEN | FLASH_ACR_LATENCY_5WS;
// switch to PLL
RCC->CFGR |= RCC_CFGR_SW_PLL;
while ((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_PLL);
// *** running on PLL ***
}
void watchdog_init(void) {
// setup watchdog
IWDG->KR = 0x5555;
IWDG->PR = 0; // divider /4
// 0 = 0.125 ms, let's have a 50ms watchdog
IWDG->RLR = 400 - 1;
IWDG->KR = 0xCCCC;
}
void watchdog_feed(void) {
IWDG->KR = 0xAAAA;
}